This document provides instructions for removing and installing engine parts on a 312B EXCAVATOR, including:
- Removing the engine oil filter base by using a strap wrench and removing bolts and washers.
- Installing a new gasket and O-rings before reinstalling the engine oil filter base.
- Removing the engine oil cooler by removing bolts securing it to the engine block and removing attached hoses and tubes.
- Disassembling the oil cooler by removing nuts, gaskets, and separating the core from the cover.
- Removing the engine oil relief valve by removing a plug and spring components from the cylinder block.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and filters, checking seals and gaskets, and ensuring parts are clean to prevent contamination. Tools required are listed. Safety notices warn of hot oil, containing fluids, and disposing of fluids properly.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and washers, checking seals for wear, removing and installing parts, and ensuring cleanliness to prevent contamination. Tools required include a strap wrench and the procedures note containing fluids and disposing of them properly.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and filters, checking seals and gaskets, and ensuring parts are clean to prevent contamination. Tools and safety precautions are also listed.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and filters, checking seals and gaskets, and ensuring parts are clean to prevent contamination. Tools required are listed. Safety notices warn of hot oil, containing fluids, and disposing of fluids properly.
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including:
- Removing and installing the engine oil filter base
- Removing, disassembling, and assembling the engine oil cooler
- Removing and installing the engine oil relief valve
The document contains detailed step-by-step instructions, illustrations, safety notices, and cautions to ensure the work is performed properly. Technicians are directed to contained fluids, clean parts, and follow other best practices.
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including:
- Removing and installing the engine oil filter base
- Removing, disassembling, and assembling the engine oil cooler
- Removing and installing the engine oil relief valve
The document contains detailed step-by-step instructions, illustrations, safety notices, and cautions to ensure the work is performed properly. Technicians are instructed to clean parts, check for damage, and replace worn components as needed.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and filters, checking seals and gaskets, and ensuring parts are clean to prevent contamination. Tools and safety precautions are also listed.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and filters, checking seals and gaskets, and ensuring parts are clean to prevent contamination. Tools and safety precautions are also listed.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and filters, checking seals and gaskets, and ensuring parts are clean to prevent contamination. Tools required are listed. Safety notices warn of hot oil, containing fluids, and disposing of fluids properly.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and washers, checking seals for wear, removing and installing parts, and ensuring cleanliness to prevent contamination. Tools required include a strap wrench and the procedures note containing fluids and disposing of them properly.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and filters, checking seals and gaskets, and ensuring parts are clean to prevent contamination. Tools and safety precautions are also listed.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and filters, checking seals and gaskets, and ensuring parts are clean to prevent contamination. Tools required are listed. Safety notices warn of hot oil, containing fluids, and disposing of fluids properly.
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including:
- Removing and installing the engine oil filter base
- Removing, disassembling, and assembling the engine oil cooler
- Removing and installing the engine oil relief valve
The document contains detailed step-by-step instructions, illustrations, safety notices, and cautions to ensure the work is performed properly. Technicians are directed to contained fluids, clean parts, and follow other best practices.
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including:
- Removing and installing the engine oil filter base
- Removing, disassembling, and assembling the engine oil cooler
- Removing and installing the engine oil relief valve
The document contains detailed step-by-step instructions, illustrations, safety notices, and cautions to ensure the work is performed properly. Technicians are instructed to clean parts, check for damage, and replace worn components as needed.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and filters, checking seals and gaskets, and ensuring parts are clean to prevent contamination. Tools and safety precautions are also listed.
The document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 3064 or 3066 engine. The instructions include removing bolts and filters, checking seals and gaskets, and ensuring parts are clean to prevent contamination. Tools and safety precautions are also listed.
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including:
- Removing and installing the engine oil filter base
- Removing, disassembling, and assembling the engine oil cooler
- Removing and installing the engine oil relief valve
The instructions include diagrams to identify the specific components and numbered steps to guide the process. Safety notices are provided throughout to warn of hazards and best practices for containment of fluids.
Caterpillar cat 321 c excavator (prefix dax) service repair manual (dax00001 ...fujsjfkkskefsme
This document provides instructions for removing, disassembling, and assembling an engine oil filter base and engine oil cooler on a Caterpillar 321C excavator. The summary is:
1) The instructions describe using a strap wrench and removing bolts to detach the oil filter base and filter from the engine.
2) To disassemble the oil cooler, nuts are removed to separate the core from the cover, and gaskets are checked for wear.
3) Reassembly involves installing new gaskets on the core, securing the core to the cover with nuts, and reinstalling the assembled oil cooler.
Caterpillar cat 321 c excavator (prefix dax) service repair manual (dax00001 ...ufjjdkskemmd
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including the engine oil filter base, engine oil cooler, and engine oil relief valve. The procedures describe using specific tools to remove parts like bolts, filters, and bases. Safety notices are included to handle fluids properly and avoid contamination.
Caterpillar cat 321 c excavator (prefix dax) service repair manual (dax00001 ...ufjjskekkmde
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including the engine oil filter base, engine oil cooler, and engine oil relief valve. The procedures describe using specific tools to remove parts like bolts, filters, and bases. Safety notices are included to handle fluids properly and avoid contamination.
Caterpillar cat 321 c excavator (prefix dax) service repair manual (dax00001 ...jjskefkskemik
This document provides instructions for removing, disassembling, and assembling an engine oil cooler on Caterpillar 3064 and 3066 engines. The removal process involves draining fluids, removing mounting bolts and washers, and checking gaskets and seals. The disassembly separates the oil cooler core from the cover. Assembly installs new gaskets and secures the core and cover with bolts. Safety notices warn of hot fluids and keeping parts clean to prevent damage.
This document provides instructions for removing and installing an engine oil relief valve on a Caterpillar 321C EXCAVATOR. The removal procedure involves taking out the threaded plug, shim, spring and spring seat from the right side of the cylinder block. The installation procedure specifies cleaning all parts and reversing the removal steps. Technicians are advised to inspect parts for wear and replace as needed.
This document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 321C excavator engine. The summary is:
1) The document outlines the required tools and safety procedures for working on the engine.
2) The instructions provide detailed steps for removing the oil filter base, which include using a strap wrench to remove the filter and bolts to remove the base.
3) Similarly, directions are given for removing the engine oil cooler by removing mounting bolts, tubes, and checking seals and gaskets.
4) Reinstallation steps are then described for both the oil filter base and cooler.
This document provides instructions for removing and installing an engine oil relief valve on a Caterpillar 321C EXCAVATOR. The removal procedure involves taking out the threaded plug, shim, spring and spring seat from the right side of the cylinder block. The installation procedure specifies cleaning all parts and reversing the removal steps. Technicians are advised to inspect parts for wear and replace as needed.
This document provides instructions for removing, disassembling, assembling, and installing the engine oil filter base, engine oil cooler, engine oil relief valve, and engine oil bypass valve on a Caterpillar 312 excavator with a 3064 engine. The procedures describe cleaning parts, checking for damage, and securing components with bolts and gaskets in the correct order and torque specifications.
This document provides instructions for removing, disassembling, assembling, and installing the engine oil filter base, engine oil cooler, engine oil relief valve, and engine oil bypass valve on a Caterpillar 312 excavator with a 3064 engine. The procedures describe cleaning parts, checking for damage, applying oil to seals, and torquing bolts to specification.
This document provides instructions for removing, disassembling, assembling, and installing the engine oil filter base, engine oil cooler, engine oil relief valve, and engine oil bypass valve on a Caterpillar 312 excavator with a 3064 engine. The procedures describe cleaning parts, checking for damage, and securing components with bolts and gaskets in the correct order and torque specifications.
Fiat Kobelco SL30B Skid Steer Loader Service Repair Manual.pdfprmy389342
This document is the service manual for an SL30B skid steer loader. It provides safety precautions and instructions for operating and servicing the loader. Some key points:
- The manual outlines many safety rules for operating the loader safely, such as wearing protective equipment, not allowing passengers, and ensuring all equipment is lowered before servicing.
- It provides standard torque specifications for various types of hardware including decimal, metric, and hydraulic fittings to ensure correct tightening of components.
- The manual is organized into tabs covering general information, engines, fuel system, electrical systems, power train, hydraulics, and mounted equipment. Each tab contains an index of relevant sections.
- Sections provide instructions
Fiat Kobelco EX95W Mini Wheel Excavator Service Repair Manual.pdfprmy389342
This document provides safety precautions for operating an excavator. It advises reading the operator's manual carefully before starting or using the machine. Operators should be familiar with all safety signs and their meanings. Only authorized personnel should operate the machine. Personal protective equipment such as hard hats and safety glasses should always be worn. The operator's compartment and controls should be kept clean. Operators should not jump on or off the machine and should keep hands and feet inside the cab at all times. The machine should come to a complete stop before the operator exits. Height, width and weight limitations of the work site must be assessed. Underground utilities should be located and marked before digging.
Daewoo Doosan DE12TIS Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12TI Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12T Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12 Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Crown TSP6000 Series Turret Order Picker Parts Catalogue Manual.pdfprmy389342
This document is a parts manual for the power unit of a TSP6000 series truck. It contains 30 numbered parts that make up the power unit, listed with their part numbers and the quantity required. Key components included are the power unit enclosure, rear doors, covers, fasteners, and guards. The parts are organized with an index and diagram to allow technicians to easily find replacement parts.
Crown LP3020 Lift Truck Service Repair Manual.pdfprmy389342
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes overview diagrams of truck components, inspection and maintenance schedules, repair procedures, and part replacement instructions. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Crown LP3010 Lift Truck Service Repair Manual.pdfprmy389342
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes safety notes, inspection and maintenance schedules, repair and replacement procedures, and diagrams. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
More Related Content
Similar to Caterpillar Cat 312B EXCAVATOR (Prefix 9HR) Service Repair Manual (9HR00001 and up).pdf
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including:
- Removing and installing the engine oil filter base
- Removing, disassembling, and assembling the engine oil cooler
- Removing and installing the engine oil relief valve
The instructions include diagrams to identify the specific components and numbered steps to guide the process. Safety notices are provided throughout to warn of hazards and best practices for containment of fluids.
Caterpillar cat 321 c excavator (prefix dax) service repair manual (dax00001 ...fujsjfkkskefsme
This document provides instructions for removing, disassembling, and assembling an engine oil filter base and engine oil cooler on a Caterpillar 321C excavator. The summary is:
1) The instructions describe using a strap wrench and removing bolts to detach the oil filter base and filter from the engine.
2) To disassemble the oil cooler, nuts are removed to separate the core from the cover, and gaskets are checked for wear.
3) Reassembly involves installing new gaskets on the core, securing the core to the cover with nuts, and reinstalling the assembled oil cooler.
Caterpillar cat 321 c excavator (prefix dax) service repair manual (dax00001 ...ufjjdkskemmd
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including the engine oil filter base, engine oil cooler, and engine oil relief valve. The procedures describe using specific tools to remove parts like bolts, filters, and bases. Safety notices are included to handle fluids properly and avoid contamination.
Caterpillar cat 321 c excavator (prefix dax) service repair manual (dax00001 ...ufjjskekkmde
This document provides instructions for removing and installing various engine components on a Caterpillar 321C EXCAVATOR, including the engine oil filter base, engine oil cooler, and engine oil relief valve. The procedures describe using specific tools to remove parts like bolts, filters, and bases. Safety notices are included to handle fluids properly and avoid contamination.
Caterpillar cat 321 c excavator (prefix dax) service repair manual (dax00001 ...jjskefkskemik
This document provides instructions for removing, disassembling, and assembling an engine oil cooler on Caterpillar 3064 and 3066 engines. The removal process involves draining fluids, removing mounting bolts and washers, and checking gaskets and seals. The disassembly separates the oil cooler core from the cover. Assembly installs new gaskets and secures the core and cover with bolts. Safety notices warn of hot fluids and keeping parts clean to prevent damage.
This document provides instructions for removing and installing an engine oil relief valve on a Caterpillar 321C EXCAVATOR. The removal procedure involves taking out the threaded plug, shim, spring and spring seat from the right side of the cylinder block. The installation procedure specifies cleaning all parts and reversing the removal steps. Technicians are advised to inspect parts for wear and replace as needed.
This document provides instructions for removing and installing an engine oil filter base and engine oil cooler on a Caterpillar 321C excavator engine. The summary is:
1) The document outlines the required tools and safety procedures for working on the engine.
2) The instructions provide detailed steps for removing the oil filter base, which include using a strap wrench to remove the filter and bolts to remove the base.
3) Similarly, directions are given for removing the engine oil cooler by removing mounting bolts, tubes, and checking seals and gaskets.
4) Reinstallation steps are then described for both the oil filter base and cooler.
This document provides instructions for removing and installing an engine oil relief valve on a Caterpillar 321C EXCAVATOR. The removal procedure involves taking out the threaded plug, shim, spring and spring seat from the right side of the cylinder block. The installation procedure specifies cleaning all parts and reversing the removal steps. Technicians are advised to inspect parts for wear and replace as needed.
This document provides instructions for removing, disassembling, assembling, and installing the engine oil filter base, engine oil cooler, engine oil relief valve, and engine oil bypass valve on a Caterpillar 312 excavator with a 3064 engine. The procedures describe cleaning parts, checking for damage, and securing components with bolts and gaskets in the correct order and torque specifications.
This document provides instructions for removing, disassembling, assembling, and installing the engine oil filter base, engine oil cooler, engine oil relief valve, and engine oil bypass valve on a Caterpillar 312 excavator with a 3064 engine. The procedures describe cleaning parts, checking for damage, applying oil to seals, and torquing bolts to specification.
This document provides instructions for removing, disassembling, assembling, and installing the engine oil filter base, engine oil cooler, engine oil relief valve, and engine oil bypass valve on a Caterpillar 312 excavator with a 3064 engine. The procedures describe cleaning parts, checking for damage, and securing components with bolts and gaskets in the correct order and torque specifications.
Similar to Caterpillar Cat 312B EXCAVATOR (Prefix 9HR) Service Repair Manual (9HR00001 and up).pdf (11)
Fiat Kobelco SL30B Skid Steer Loader Service Repair Manual.pdfprmy389342
This document is the service manual for an SL30B skid steer loader. It provides safety precautions and instructions for operating and servicing the loader. Some key points:
- The manual outlines many safety rules for operating the loader safely, such as wearing protective equipment, not allowing passengers, and ensuring all equipment is lowered before servicing.
- It provides standard torque specifications for various types of hardware including decimal, metric, and hydraulic fittings to ensure correct tightening of components.
- The manual is organized into tabs covering general information, engines, fuel system, electrical systems, power train, hydraulics, and mounted equipment. Each tab contains an index of relevant sections.
- Sections provide instructions
Fiat Kobelco EX95W Mini Wheel Excavator Service Repair Manual.pdfprmy389342
This document provides safety precautions for operating an excavator. It advises reading the operator's manual carefully before starting or using the machine. Operators should be familiar with all safety signs and their meanings. Only authorized personnel should operate the machine. Personal protective equipment such as hard hats and safety glasses should always be worn. The operator's compartment and controls should be kept clean. Operators should not jump on or off the machine and should keep hands and feet inside the cab at all times. The machine should come to a complete stop before the operator exits. Height, width and weight limitations of the work site must be assessed. Underground utilities should be located and marked before digging.
Daewoo Doosan DE12TIS Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12TI Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12T Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12 Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Crown TSP6000 Series Turret Order Picker Parts Catalogue Manual.pdfprmy389342
This document is a parts manual for the power unit of a TSP6000 series truck. It contains 30 numbered parts that make up the power unit, listed with their part numbers and the quantity required. Key components included are the power unit enclosure, rear doors, covers, fasteners, and guards. The parts are organized with an index and diagram to allow technicians to easily find replacement parts.
Crown LP3020 Lift Truck Service Repair Manual.pdfprmy389342
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes overview diagrams of truck components, inspection and maintenance schedules, repair procedures, and part replacement instructions. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Crown LP3010 Lift Truck Service Repair Manual.pdfprmy389342
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes safety notes, inspection and maintenance schedules, repair and replacement procedures, and diagrams. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Crown GPC2000 Series Lift Truck Parts Catalogue Manual.pdfprmy389342
This document provides lubrication information for a parts manual. It lists the recommended lubricants and their specifications for various components of the product. Grease type 2 is recommended for bearings and grease type 2-P for ball bearings. Mobilex 00-200 is suitable for lower operating temperatures, while Mobilex 005-200 is recommended for higher temperatures.
Clark TMX12-25 Forklift Service Repair Manual.pdfprmy389342
This document provides instructions for safely maintaining electric forklifts. It discusses:
1. Identifying safety signs and messages and outlining safe maintenance practices such as blocking the wheels, disconnecting batteries, and checking for fuel leaks before working.
2. Procedures for lifting parts of the forklift like the drive wheels or rear, including using blocks and jacks of adequate capacity.
3. Chain securing an upright carriage when raised and shipping tie-down instructions.
Clark EPX 16-20S Forklift Service Repair Manual.pdfprmy389342
This document provides instructions for safely maintaining electric forklifts. It discusses:
1. Identifying safety signs and messages in the manual and on trucks to understand hazards.
2. Recommended safe maintenance practices such as properly ventilating work areas, using fire protection equipment, and disconnecting batteries before working on electrical systems.
3. Procedures for safely lifting, jacking, and blocking forklifts, including raising the drive wheels, upright, and entire truck, to access components for repair work.
Clark CMP 70 Forklift Service Repair Manual.pdfprmy389342
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Clark CMP 60 Forklift Service Repair Manual.pdfprmy389342
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Clark CMP 50 Forklift Service Repair Manual.pdfprmy389342
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Caterpillar Cat D400E II EJECTOR TRUCK (Prefix APF) Service Repair Manual (AP...prmy389342
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and the engine oil filter base on a D400E II Ejector Truck with a 3406E engine. The procedures describe draining fluids, using various specialty tools to compress springs, extract components, and properly position replacement parts. Safety notices warn of potential injury from compressed springs and ensure cleanliness when handling engine parts.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312B EXCAVATOR 9HR
Configuration: ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01565892
Engine Oil Filter Base - Remove
SMCS - 1306-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench Assembly 1
Hot oil and components can cause personal injury.
Do not allow hot oil or components to contact skin.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
1/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00813775
Illustration 2 g00813789
1. Use Tool (A) and remove oil filter (2) from engine oil filter base (3) .
2. Remove the bolts (1) and washers from the engine oil filter base (3) .
3. Remove engine oil filter base (3) from the engine.
2/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 4. Check the condition of O-ring seals (4). Replace the O-ring seals, if the O-ring seals are
worn or damaged.
Illustration 3 g00813823
5. If necessary, remove eight bolts (6) and the washers in order to remove plate (5) from the
engine.
6. Check the condition of gasket (not shown). Replace the gasket, if the gasket is worn or
damaged.
7. Check engine oil filter base (3) and plate (5) for clogging and cracks. Replace damaged
components with replacement parts.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 27 10:15:10 UTC+0800 2020
3/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312B EXCAVATOR 9HR
Configuration: ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01565969
Engine Oil Filter Base - Install
SMCS - 1306-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00813823
1. Secure gasket and plate (5) to the cylinder block with eight bolts (6) .
1/2
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 2 g00813789
2. Check the condition of O-ring seals (4). Replace the O-ring seals, if the O-ring seals are
damaged.
Note: Coat all of the O-ring seals with clean engine oil prior to installation.
3. Install the O-ring seals (4) on engine oil filter base (3) .
Illustration 3 g00813775
4. Secure engine oil filter base (3) to the plate (5) with four bolts (1) and the washers.
5. Install the engine oil filter (2) to the engine oil filter base (3) .
Note: Follow the installation procedure on the engine oil filter in order to install the engine
oil filter on the engine oil filter base.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 27 10:16:09 UTC+0800 2020
2/2
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312B EXCAVATOR 9HR
Configuration: ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01615275
Engine Oil Cooler - Remove
SMCS - 1378-011
Removal Procedure
Start By:
A. Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump
- Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/2
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 1 g00611319
1. If necessary, remove bolt (1) and the washer from the cylinder head.
2. Remove oil tube assembly (dipstick) (2) from the cylinder block.
3. Check O-ring seal (3) (not shown) for wear or damage. Replace the O-ring seal, if the O-
ring seal is worn or damaged.
Illustration 2 g00611320
4. Remove bolts (4) and the washers that secure the oil cooler to the engine cylinder block.
The 3066 Engine has 24 bolts and washers while the 3064 Engine has 16 bolts and washers.
5. Remove engine oil cooler (5) and gasket (6) (not shown) from the engine cylinder block.
Check the gasket for wear or damage. Replace the gasket, if the gasket is worn or damaged.
Note: Check the oil cooler cover for cracks. Replace the cover, if the cover is cracked.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 27 10:17:09 UTC+0800 2020
2/2
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312B EXCAVATOR 9HR
Configuration: ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01152039
Engine Oil Cooler - Disassemble
SMCS - 1378-015
Disassembly Procedure
Start By:
A. Remove the oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 1 g00618921
Illustration 2 g00611507
1. Remove four nuts (1) and the washers from the oil cooler core (3) .
2. Remove oil cooler core (3) from oil cooler cover (2) .
Note: Check the engine oil cooler core for cracks, clogging, and ruptures.
3. Remove two gaskets (4) from the oil cooler core. Check the gasket for wear or damage.
Replace the gaskets, if necessary.
2/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 27 10:18:08 UTC+0800 2020
3/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312B EXCAVATOR 9HR
Configuration: ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01152137
Engine Oil Cooler - Assemble
SMCS - 1378-016
Assembly Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g00618921
Illustration 2 g00611507
1. Install two gaskets (4) onto the oil cooler core (3) .
2. Install the oil cooler cover (2) onto the oil cooler core (3) .
3. Install four nuts (1) and the washers, which secure the oil cooler core to the oil cooler cover.
4. Tighten the four nuts (1) .
End By: Install the oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 27 10:19:07 UTC+0800 2020
2/2
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312B EXCAVATOR 9HR
Configuration: ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01615279
Engine Oil Cooler - Install
SMCS - 1378-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00611320
1. Install engine oil cooler (5) and new gasket (6) (not shown). Ensure that all mating surfaces
are clean. Install bolts (4) and washers in order to secure the engine oil cooler to the engine
cylinder block. The 3066 Engine has 24 bolts and washers while the 3064 Engine has 16
bolts and washers.
1/2
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 2 g00611319
2. Install oil tube assembly (dipstick) (2) into the cylinder block.
Note: Apply clean engine oil to the O-ring seal (3) (not shown) before installation.
3. Install bolt (1) and the washer into the cylinder head.
End By: Install the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection
Pump - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 27 10:20:07 UTC+0800 2020
2/2
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312B EXCAVATOR 9HR
Configuration: ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01615285
Engine Oil Relief Valve - Remove and Install
SMCS - 1315-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00607236
1/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 2 g00607247
1. Remove threaded plug (1) and the shim (2) for the engine oil relief valve from the right side
of the cylinder block.
2. Remove the spring (3) and spring seat (4) from the cylinder block.
Note: Check the spring seat (4) and the valve seat for an abnormal contact pattern. Inspect the
spring (3) for weakness or damage. If necessary, replace the engine oil relief valve with a new
part.
Note: Check the cylinder block for oil passages that are clogged.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 3 g00607247
Illustration 4 g00607236
1. Install spring seat (4) and spring (3) in the cylinder block.
2. Install shim (2) and threaded plug (1) in the cylinder block.
3. Tighten threaded plug (1) of the engine oil relief valve to a torque of 49 ± 5 N·m (36 ± 4 lb
ft).
Note: Test the opening pressure for the engine oil relief valve. The opening pressure for the
relief valve is 343 ± 20 kPa (50 ± 3 psi). Make adjustments by shimming, if necessary.
For more information, refer to Specifications, "Engine Oil Relief Valve".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 27 10:21:06 UTC+0800 2020
3/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312B EXCAVATOR 9HR
Configuration: ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01615293
Engine Oil Bypass Valve - Remove and Install
SMCS - 1306-010-BV
Removal Procedure
Start By:
A. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00607679
1/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 2 g00607688
1. Remove threaded plug (1) for the engine oil bypass valve from the cylinder block (2) .
2. Remove shim (3) from the cylinder block (2) .
3. Remove spring (4) from the cylinder block (2) .
4. Remove spring seat (5) from the cylinder block (2) .
Note: Check the spring seat (5) and the valve seat for an abnormal contact pattern. Inspect the
spring (4) for weakness or damage. If necessary, replace the engine oil bypass valve with a new
part.
Note: Check the cylinder block (2) for oil passages that are clogged.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 3 g00607688
Illustration 4 g00607679
1. Install spring seat (5) (not shown) and spring (4) in the cylinder block (2) .
2. Install shim (3) and threaded plug (1) in the cylinder block (2) .
3. Tighten the threaded plug (1) to a torque of 69 ± 5 N·m (51 ± 4 lb ft).
Note: Test the opening pressure for the engine oil relief valve. The opening pressure for the
relief valve is 981 ± 98 kPa (142 ± 14 psi). Make adjustments by shimming, if necessary.
For information on testing the engine oil relief valve, refer to Testing and Adjusting, "Lubrication
System".
For more information, refer to Specifications, "Engine Oil Bypass Valve".
End By: Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan -
Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 27 10:22:05 UTC+0800 2020
3/3
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312B EXCAVATOR 9HR
Configuration: ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01146335
Engine Oil Pump - Remove
SMCS - 1304-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2320 Combination Puller 1
B 1P-0510 Driver Group 1
Start By:
A. Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
1/5
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00607826
Note: Illustration 1 does not show that the front housing is removed from the cylinder
block.
1. Remove bolt (1) from the cover (2) .
2. Remove cover (2) for the engine oil pump from the front housing. Check gasket (3) (not
shown) for damage or wear. Replace the gasket, if the gasket is worn or damaged.
Illustration 2 g00607770
2/5
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. 3. Remove driven gear (4) for the oil pump. Pull the gear straight out of the front housing (5)
(slip fit).
Illustration 3 g00607857
4. Position the front housing on a work bench in order to remove the oil pump gear from the
rear of the housing.
5. Use Tool (A) to remove oil pump gear (6) from the front housing.
Illustration 4 g00607885
6. Position the front housing on a work bench in order to remove the drive gear from the front
of the housing.
7. Remove drive gear (7) from the front housing.
3/5
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 5 g00607947
8. Use Tool (B) to remove front oil seal (8) (not shown) from the front housing.
Illustration 6 g00607955
Note: Illustration 6 does not show that the front seal (8) is removed.
9. Remove set screw (9) from the front housing.
Illustration 7 g00607962
4/5
ISJ HEX COMMONALITY CHART 9HR00001-UP (MACHINE)(SEBP5600 - 00) - ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...