This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and parts and provides step-by-step instructions to remove components such as sprockets, valves, gears, plates, and seals. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids. Detailed illustrations accompany each step for clarity.
Caterpillar cat 313 f lgc excavator (prefix gjd) service repair manual (gjd00...fjkskefksmeme
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It outlines 16 steps to disassemble the final drive, removing components like the sprocket, traction control valve, and barrel assembly. It then details 14 steps to disassemble the counterbalance valve, removing parts like the spool, springs, and relief valves. Finally, it lists 11 steps to disassemble the travel motor, removing the piston assembly, guide assembly, separator and friction plates, and barrel assembly components. Safety notices are included throughout regarding fluid containment and release of stored energy from springs.
Caterpillar cat 311 f lrr excavator (prefix jft) service repair manual (jft00...fjskekdmjekm
This document provides disassembly instructions for the final drive, travel motor, and other components of a 311F LRR excavator. It lists over 30 detailed steps to disassemble the final drive, travel motor, counterbalance valve, and other systems. Tools and safety precautions are also provided to properly disassemble components like springs that could cause injury if not handled correctly. The goal is to disassemble the major components into their individual parts to allow for cleaning, inspection, and replacement of any worn parts prior to reassembly.
Caterpillar cat 349 d excavator (prefix nnf) service repair manual (nnf00001 ...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and more. It then lists 28 steps for assembly, installing components like seals, spacers, washers, pistons and plugs in the reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components to ensure correct reassembly.
Caterpillar cat 314 e cr excavator (prefix gmd) service repair manual (gmd000...jfdskekdmme
This document provides instructions for disassembling various components of a 314E CR excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines a step-by-step process for safely removing each part, noting precautions for releasing pressures and contained fluids. Detailed illustrations accompany each step to ensure correct reassembly.
Caterpillar cat 349 e l excavator (prefix tfg) service repair manual (tfg0000...cdsaas
1) The document provides step-by-step instructions for disassembling and assembling the hydraulic fan drive of a 349E L excavator.
2) The disassembly process involves removing 22 components including bolts, seals, plates, and housing pieces.
3) The assembly process reverses the disassembly steps and includes applying sealant and pressing components together using various tools.
Caterpillar cat 349 d l excavator (prefix jgb) service repair manual (jgb0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, disks, seals and pistons. It also provides assembly instructions, noting that all parts must be cleaned and O-rings replaced before reinstalling components like the rotating group, barrel and housing seals in the reverse order of disassembly. Proper identification and orientation of parts is emphasized to ensure correct assembly.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 27 steps for assembly, installing components like seals, pistons, housing, plates and head in reverse order of disassembly. Tools required are listed in tables. Cautions are provided about cleaning parts and preventing contamination of hydraulic systems.
Caterpillar cat 349 e excavator (prefix rgh) service repair manual (rgh00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E excavator. The disassembly process includes 27 steps to remove components like the head assembly, brake housing, rotating group, barrel assembly and more. The assembly process reverses the disassembly with 13 steps like installing seals, springs, pistons and plates in the proper order and orientation. Precise torques and specifications are provided for correct installation of components.
Caterpillar cat 313 f lgc excavator (prefix gjd) service repair manual (gjd00...fjkskefksmeme
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It outlines 16 steps to disassemble the final drive, removing components like the sprocket, traction control valve, and barrel assembly. It then details 14 steps to disassemble the counterbalance valve, removing parts like the spool, springs, and relief valves. Finally, it lists 11 steps to disassemble the travel motor, removing the piston assembly, guide assembly, separator and friction plates, and barrel assembly components. Safety notices are included throughout regarding fluid containment and release of stored energy from springs.
Caterpillar cat 311 f lrr excavator (prefix jft) service repair manual (jft00...fjskekdmjekm
This document provides disassembly instructions for the final drive, travel motor, and other components of a 311F LRR excavator. It lists over 30 detailed steps to disassemble the final drive, travel motor, counterbalance valve, and other systems. Tools and safety precautions are also provided to properly disassemble components like springs that could cause injury if not handled correctly. The goal is to disassemble the major components into their individual parts to allow for cleaning, inspection, and replacement of any worn parts prior to reassembly.
Caterpillar cat 349 d excavator (prefix nnf) service repair manual (nnf00001 ...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and more. It then lists 28 steps for assembly, installing components like seals, spacers, washers, pistons and plugs in the reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components to ensure correct reassembly.
Caterpillar cat 314 e cr excavator (prefix gmd) service repair manual (gmd000...jfdskekdmme
This document provides instructions for disassembling various components of a 314E CR excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines a step-by-step process for safely removing each part, noting precautions for releasing pressures and contained fluids. Detailed illustrations accompany each step to ensure correct reassembly.
Caterpillar cat 349 e l excavator (prefix tfg) service repair manual (tfg0000...cdsaas
1) The document provides step-by-step instructions for disassembling and assembling the hydraulic fan drive of a 349E L excavator.
2) The disassembly process involves removing 22 components including bolts, seals, plates, and housing pieces.
3) The assembly process reverses the disassembly steps and includes applying sealant and pressing components together using various tools.
Caterpillar cat 349 d l excavator (prefix jgb) service repair manual (jgb0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, disks, seals and pistons. It also provides assembly instructions, noting that all parts must be cleaned and O-rings replaced before reinstalling components like the rotating group, barrel and housing seals in the reverse order of disassembly. Proper identification and orientation of parts is emphasized to ensure correct assembly.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 27 steps for assembly, installing components like seals, pistons, housing, plates and head in reverse order of disassembly. Tools required are listed in tables. Cautions are provided about cleaning parts and preventing contamination of hydraulic systems.
Caterpillar cat 349 e excavator (prefix rgh) service repair manual (rgh00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E excavator. The disassembly process includes 27 steps to remove components like the head assembly, brake housing, rotating group, barrel assembly and more. The assembly process reverses the disassembly with 13 steps like installing seals, springs, pistons and plates in the proper order and orientation. Precise torques and specifications are provided for correct installation of components.
Caterpillar cat 349 e excavator (prefix fjb) service repair manual (fjb00001 ...cdsaas
This document provides instructions for disassembling and assembling the hydraulic fan drive of a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
Caterpillar cat 349 d l mobile hydraulic excavator (prefix dkn) service repai...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It begins with removing external components like the displacement change valve and head. Internal components like the brake piston, disks, and rotating group are then removed. Individual parts in the rotating group like the piston assemblies and barrel are also taken apart. The assembly instructions reverse the disassembly process and provide details on cleaning, lubricating, and installing parts in their proper positions and with the correct torque specifications.
Caterpillar cat 349 e l excavator (prefix kfx) service repair manual (kfx0000...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E L VG excavator. It includes 27 steps for disassembly, removing components like seals, springs, bearings, and housing pieces. The assembly section has 13 steps, covering lubrication of parts and installation of components in reverse order of disassembly, like installing seals, springs, pistons, and housing pieces. Specifications are provided for torque and dimensions of components. Required tools are listed.
Caterpillar cat 349 d excavator (prefix men) service repair manual (men00001 ...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 13 steps for assembly, including installing seals, spacers, pistons, housing, and tightening components. Required tools include eyebolts, pullers, drivers, and seals. Cleanliness is emphasized to prevent contamination of hydraulic components.
Caterpillar cat 349 e excavator (prefix spg) service repair manual (spg00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves removing 27 individual components from the motor housing, rotating group, and brake housing. The assembly process describes installing the components in reverse order and includes specifications for various parts. Proper lubrication and torque specifications are noted throughout.
The document provides instructions for disassembling and assembling a travel motor. It lists 30 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 31 steps for assembly, reinstalling these components in reverse order. Precautions are given to prevent contamination and ensure proper installation of parts like O-rings, seals, and pins in their original locations. Tools required are listed in a table.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...fksjksmmde
This document provides instructions for disassembling various components of a 312D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 detailed steps to disassemble parts like the traction control valve, barrel assembly, piston assemblies, springs and seals. Safety notices are included to warn of potential injuries from parts or fluids.
Caterpillar cat 349 d l excavator (prefix khs) service repair manual (khs0000...cdsaas
The document provides instructions for assembling a travel motor. It describes 33 steps for installing various components like seals, pistons, plates, and bearings. Measurements are taken throughout to ensure proper assembly. Cleanliness is emphasized to prevent contaminating the hydraulic system. The travel motor must be filled with the correct oil type before operation to prevent damage.
Caterpillar cat 345 b l series ii excavator (prefix akx) service repair manua...jfdskekdmme
This document provides disassembly and assembly instructions for the travel motor on Caterpillar 345B and 345B L Series II Excavators. It lists 31 steps to disassemble the travel motor by removing components like the head, plates, seals, pistons, and housing. It also provides lubrication and installation instructions for assembling the travel motor. Proper assembly requires using the correct tools and ensuring parts are clean before reinstalling them in their original locations and orientations.
Caterpillar cat 349 d2 l excavator (prefix yag) service repair manual (yag000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components such as the head, plates, seals, pistons, and housing. Precautions are outlined to prevent contamination and ensure proper installation of parts in their original locations. The assembly section instructs installation of components in reverse order and includes applying sealant and lubricant.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...fjkskefksmeme
1) The document provides disassembly instructions for components of a 313F LGC excavator, including the final drive, travel motor, and counterbalance valve.
2) It lists required tools and safety precautions and provides a step-by-step process to remove each part, noting identification numbers where applicable.
3) Detailed illustrations accompany each step to show how to remove components like sprockets, valves, springs, gears, seals and other parts while taking care to mark locations for reassembly.
This document provides instructions for removing and installing various engine components on a Caterpillar 349D2 excavator, including:
1. Removing and installing the rear gear group, which involves removing several gears, seals, bolts and bearings.
2. Removing the flywheel using lifting equipment and tools.
3. Installing the flywheel and ensuring it is properly seated.
4. Removing and installing the crankshaft rear seal using bolts and following inspection procedures.
Caterpillar cat 349 f excavator (prefix tew) service repair manual (tew00001 ...fjsjjekdkme
1. The document provides step-by-step instructions for disassembling and assembling the travel motor on 349F and 349F L excavators.
2. It describes removing over 30 components of the travel motor in sequential order, including plugs, springs, pistons, plates, seals, and more.
3. Precautions are provided to protect against spring forces and ensure components are reinstalled in their original positions and order.
Caterpillar cat 319 d l excavator (prefix fmh) service repair manual (fmh0000...fjkskedmme
This document provides instructions for disassembling and assembling a travel motor. The 27-step disassembly procedure involves removing components like the head, brake piston, barrel assembly, and shaft assembly. The 23-step assembly procedure describes reinstalling these components in reverse order and provides notices about proper installation of parts like the cam plate and keys. Precise alignment of parts is emphasized to prevent damage during reassembly.
Caterpillar cat 349 f excavator (prefix hpd) service repair manual (hpd00001 ...fjsjjekdkme
The document provides instructions to disassemble a travel motor over 27 steps. It begins by draining the motor and removing external components like plugs, seals, and the motor head assembly. Internally, it describes removing the barrel assembly, piston assemblies, separator and friction plates, springs, and swashplate. Safety notices are provided throughout to warn of potential spring hazards and to mark components for proper reassembly.
Caterpillar cat 390 f mobile hydraulic excavator (prefix b37) service repair ...fujskekfmsme
This document provides instructions for disassembling and assembling the travel motor of a 390F Hydraulic Excavator. The disassembly procedure involves 40 steps to remove components like the head, relief valves, spools, pistons, barrel assembly, swashplate, shaft and bearings. The assembly procedure instructs to clean parts, apply oil, and install components like the lip seal, bearing, retaining ring, and shaft in the reverse order of disassembly. Proper tooling and safety precautions are noted throughout.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists the required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, plates, seals, springs, pistons, and housing pieces. Safety notices are included to warn of potential injuries from parts or released pressures.
Caterpillar cat 312 f gc excavator (prefix fke) service repair manual (fke000...fjjsieskekfmmse
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and parts and outlines a step-by-step process to disassemble each component. Safety notices are included to warn technicians of potential hazards like parts propelled by springs or pressurized hydraulic fluid. The document also notes part numbers, weights, and alignment marks needed for reassembly.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and safety precautions and gives step-by-step instructions to remove components like sprockets, fittings, valves, bearings, seals, plates, pistons, springs, and housings. Detailed illustrations accompany each step to ensure correct disassembly and orientation of parts for reassembly. Fluid drainage and weight information is provided for heavy components.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and safety precautions and gives step-by-step instructions to remove components like sprockets, fittings, valves, bearings, seals, plates, pistons, springs, and housings. Detailed illustrations accompany each step to ensure correct disassembly and orientation of parts for reassembly. Fluid drainage and weight information is provided for heavy components.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and parts, and outlines 23 steps to disassemble components such as the sprockets, traction control valve, piston assemblies, barrel assembly, and planetary gear assemblies. Safety notices are included regarding releasing pressures and springs. The overall document provides detailed instructions for technicians to fully disassemble several core systems of the excavator.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
Caterpillar cat 349 e excavator (prefix fjb) service repair manual (fjb00001 ...cdsaas
This document provides instructions for disassembling and assembling the hydraulic fan drive of a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
Caterpillar cat 349 d l mobile hydraulic excavator (prefix dkn) service repai...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It begins with removing external components like the displacement change valve and head. Internal components like the brake piston, disks, and rotating group are then removed. Individual parts in the rotating group like the piston assemblies and barrel are also taken apart. The assembly instructions reverse the disassembly process and provide details on cleaning, lubricating, and installing parts in their proper positions and with the correct torque specifications.
Caterpillar cat 349 e l excavator (prefix kfx) service repair manual (kfx0000...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E L VG excavator. It includes 27 steps for disassembly, removing components like seals, springs, bearings, and housing pieces. The assembly section has 13 steps, covering lubrication of parts and installation of components in reverse order of disassembly, like installing seals, springs, pistons, and housing pieces. Specifications are provided for torque and dimensions of components. Required tools are listed.
Caterpillar cat 349 d excavator (prefix men) service repair manual (men00001 ...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 13 steps for assembly, including installing seals, spacers, pistons, housing, and tightening components. Required tools include eyebolts, pullers, drivers, and seals. Cleanliness is emphasized to prevent contamination of hydraulic components.
Caterpillar cat 349 e excavator (prefix spg) service repair manual (spg00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves removing 27 individual components from the motor housing, rotating group, and brake housing. The assembly process describes installing the components in reverse order and includes specifications for various parts. Proper lubrication and torque specifications are noted throughout.
The document provides instructions for disassembling and assembling a travel motor. It lists 30 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 31 steps for assembly, reinstalling these components in reverse order. Precautions are given to prevent contamination and ensure proper installation of parts like O-rings, seals, and pins in their original locations. Tools required are listed in a table.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...fksjksmmde
This document provides instructions for disassembling various components of a 312D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 detailed steps to disassemble parts like the traction control valve, barrel assembly, piston assemblies, springs and seals. Safety notices are included to warn of potential injuries from parts or fluids.
Caterpillar cat 349 d l excavator (prefix khs) service repair manual (khs0000...cdsaas
The document provides instructions for assembling a travel motor. It describes 33 steps for installing various components like seals, pistons, plates, and bearings. Measurements are taken throughout to ensure proper assembly. Cleanliness is emphasized to prevent contaminating the hydraulic system. The travel motor must be filled with the correct oil type before operation to prevent damage.
Caterpillar cat 345 b l series ii excavator (prefix akx) service repair manua...jfdskekdmme
This document provides disassembly and assembly instructions for the travel motor on Caterpillar 345B and 345B L Series II Excavators. It lists 31 steps to disassemble the travel motor by removing components like the head, plates, seals, pistons, and housing. It also provides lubrication and installation instructions for assembling the travel motor. Proper assembly requires using the correct tools and ensuring parts are clean before reinstalling them in their original locations and orientations.
Caterpillar cat 349 d2 l excavator (prefix yag) service repair manual (yag000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components such as the head, plates, seals, pistons, and housing. Precautions are outlined to prevent contamination and ensure proper installation of parts in their original locations. The assembly section instructs installation of components in reverse order and includes applying sealant and lubricant.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...fjkskefksmeme
1) The document provides disassembly instructions for components of a 313F LGC excavator, including the final drive, travel motor, and counterbalance valve.
2) It lists required tools and safety precautions and provides a step-by-step process to remove each part, noting identification numbers where applicable.
3) Detailed illustrations accompany each step to show how to remove components like sprockets, valves, springs, gears, seals and other parts while taking care to mark locations for reassembly.
This document provides instructions for removing and installing various engine components on a Caterpillar 349D2 excavator, including:
1. Removing and installing the rear gear group, which involves removing several gears, seals, bolts and bearings.
2. Removing the flywheel using lifting equipment and tools.
3. Installing the flywheel and ensuring it is properly seated.
4. Removing and installing the crankshaft rear seal using bolts and following inspection procedures.
Caterpillar cat 349 f excavator (prefix tew) service repair manual (tew00001 ...fjsjjekdkme
1. The document provides step-by-step instructions for disassembling and assembling the travel motor on 349F and 349F L excavators.
2. It describes removing over 30 components of the travel motor in sequential order, including plugs, springs, pistons, plates, seals, and more.
3. Precautions are provided to protect against spring forces and ensure components are reinstalled in their original positions and order.
Caterpillar cat 319 d l excavator (prefix fmh) service repair manual (fmh0000...fjkskedmme
This document provides instructions for disassembling and assembling a travel motor. The 27-step disassembly procedure involves removing components like the head, brake piston, barrel assembly, and shaft assembly. The 23-step assembly procedure describes reinstalling these components in reverse order and provides notices about proper installation of parts like the cam plate and keys. Precise alignment of parts is emphasized to prevent damage during reassembly.
Caterpillar cat 349 f excavator (prefix hpd) service repair manual (hpd00001 ...fjsjjekdkme
The document provides instructions to disassemble a travel motor over 27 steps. It begins by draining the motor and removing external components like plugs, seals, and the motor head assembly. Internally, it describes removing the barrel assembly, piston assemblies, separator and friction plates, springs, and swashplate. Safety notices are provided throughout to warn of potential spring hazards and to mark components for proper reassembly.
Caterpillar cat 390 f mobile hydraulic excavator (prefix b37) service repair ...fujskekfmsme
This document provides instructions for disassembling and assembling the travel motor of a 390F Hydraulic Excavator. The disassembly procedure involves 40 steps to remove components like the head, relief valves, spools, pistons, barrel assembly, swashplate, shaft and bearings. The assembly procedure instructs to clean parts, apply oil, and install components like the lip seal, bearing, retaining ring, and shaft in the reverse order of disassembly. Proper tooling and safety precautions are noted throughout.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists the required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, plates, seals, springs, pistons, and housing pieces. Safety notices are included to warn of potential injuries from parts or released pressures.
Caterpillar cat 312 f gc excavator (prefix fke) service repair manual (fke000...fjjsieskekfmmse
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and parts and outlines a step-by-step process to disassemble each component. Safety notices are included to warn technicians of potential hazards like parts propelled by springs or pressurized hydraulic fluid. The document also notes part numbers, weights, and alignment marks needed for reassembly.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and safety precautions and gives step-by-step instructions to remove components like sprockets, fittings, valves, bearings, seals, plates, pistons, springs, and housings. Detailed illustrations accompany each step to ensure correct disassembly and orientation of parts for reassembly. Fluid drainage and weight information is provided for heavy components.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and safety precautions and gives step-by-step instructions to remove components like sprockets, fittings, valves, bearings, seals, plates, pistons, springs, and housings. Detailed illustrations accompany each step to ensure correct disassembly and orientation of parts for reassembly. Fluid drainage and weight information is provided for heavy components.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and parts, and outlines 23 steps to disassemble components such as the sprockets, traction control valve, piston assemblies, barrel assembly, and planetary gear assemblies. Safety notices are included regarding releasing pressures and springs. The overall document provides detailed instructions for technicians to fully disassemble several core systems of the excavator.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and other components while taking safety precautions for things like pressurized fluids and springs.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to show each step. Safety notices warn of potential injuries from springs or fluids and recommend proper protective equipment.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to identify each part and show their position. Safety notices are included to warn of potential injuries from springs or fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to show each step. Safety notices warn of potential injuries from springs or fluids and recommend proper protective equipment.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...fdhjsekdme
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...dikdkskdmmd
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and other parts. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid. Detailed illustrations supplement each disassembly step.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...jdfjskekmdme
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and other parts. Safety precautions are provided to release pressures and contain fluids. Tools required are also listed.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and plates. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to show each step. Safety notices warn of potential injuries from springs or fluids and recommend proper protective equipment.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing springs or draining fluids. The goal is to disassemble the major components into their individual parts to prepare for cleaning, inspection or repair.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or releasing pressurized fluids. Required tools are listed in a table at the beginning.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing pressurized components or springs. The goal is to disassemble the major assemblies into their individual parts to prepare for cleaning, inspection or repair.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and seals. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids. Dismantling requires specialty tools like pullers, wrenches, and pliers.
Similar to Caterpillar cat 312 f gc excavator (prefix fke) service repair manual (fke00001 and up) (20)
John deere 7, 8, 8 a, 10, &10a backhoes service repair manualfjksekmdme
This technical manual provides specifications and information for John Deere backhoes, loaders, blades, tillers and hydraulic dump units. It includes specifications on hydraulic systems, lift and drop rates, cycle times and dimensions. It also provides service recommendations for O-ring boss fittings and flat face O-ring seal fittings, including torque specifications for proper installation.
John deere 6 414 t oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John deere 6 414 d oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John deere 6 359 t oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and only critical information needed for repairs.
John deere 6 359 d oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John deere 6 329 d oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes sections on the engine, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing. The sections cover removal, repair, testing and installation procedures for engine components. It also provides specifications, torque values, and an index of topics covered in the manual. The manual is intended as a reference for experienced service technicians working on these engine models.
John deere 5 e 2bv blower service repair manualfjksekmdme
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid overreaching or pointing tools at people, and always shut off engines before adjusting or refueling.
John deere 4 276 t oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John deere 4 276 d oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John deere 4 239 t oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid in navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines. It provides removal, repair, installation, and adjustment procedures as well as diagnostics information.
John deere 4 239 d oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John deere 4 219 d oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John deere 3 179 d oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John deere 3 164 d oem engine service repair manualfjksekmdme
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John deere 3, 31, 31 a & 31b post hole diggers service repair manualfjksekmdme
This technical manual provides specifications and lubrication information for John Deere lawn and grounds care equipment. It includes torque values, recommended gear case oils and greases, transmission fluids, and specifications for rotary mowers, snowblowers, and other attachments. The manual is intended to assist experienced technicians in servicing this equipment.
Clark cmp15 forklift service repair manualfjksekmdme
This document provides instructions for safely lifting, jacking, and blocking a forklift truck. It identifies approved lifting points on the truck and describes procedures for raising different parts of the truck, including the drive wheels, entire front end using a hoist, and upright assembly. Safety precautions are emphasized, such as using equipment with sufficient lifting capacity and blocking or stabilizing parts of the truck during maintenance.
Clark cmp 50 s forklift service repair manualfjksekmdme
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark cmp 45 forklift service repair manualfjksekmdme
The document provides safety guidelines for maintaining Clark industrial trucks. It lists 21 safe maintenance practices, such as raising drive wheels before working on the truck, disconnecting the battery, checking for fuel leaks, using qualified personnel, and ensuring proper ventilation. Special precautions are outlined for hazardous areas and modifications to trucks. References to additional safety standards from ANSI, NFPA, and OSHA are also provided.
Clark cmp 40 forklift service repair manualfjksekmdme
This document provides instructions for safely lifting, jacking, and blocking a Clark forklift truck. It describes approved lifting points on the truck and procedures for raising different parts, including the drive wheels, entire front, and rear. Blocking is recommended whenever raising parts to prevent accidental rolling or movement. Safety practices like parking on level ground, engaging brakes, and removing keys are advised before beginning any work.
Clark cgp 70 forklift service repair manualfjksekmdme
The document provides information on Clark's planned maintenance program including:
- The planned maintenance program consists of basic inspections, adjustments, and lubrications performed every 50-250 hours.
- A systematic approach is outlined that includes external visual checks, operational checks, and under-the-hood tests/adjustments.
- The recommended planned maintenance tasks are listed by service manual group and include checks of fluids, filters, lubrication points, and critical fasteners as well as functional tests of vehicle systems.
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312F GC EXCAVATOR FKE
Configuration: 312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly
312F and 313F Excavators Machine Systems
Media Number -UENR6138-02 Publication Date -01/03/2015 Date Updated -14/12/2017
i05831822
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
C 8T-6699 Bolts 2
D
1P-0074 Slide Hammer Puller Gp 1
4C-5666 Threaded Adapter 1
123-6702 Backlash Gauge Gp 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
Start By:
a. Remove the final drive and the travel motor.
NOTICE
1/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor. The weight of the sprocket is
approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
2/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g00940682
4. Use Tooling (A) and a suitable lifting device to position the final drive and the travel motor
onto Tooling (B). The combined weight of the final drive and travel motor is approximately
170 kg (375 lb).
5. Drain the oil from the final drive into a suitable container for storage or for disposal. Refer
to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the final
drive.
6. Remove fittings (1). Remove fittings (2) from traction control valve (3).
7. Remove nine bolts (4) that secure traction control valve (3) to the final drive.
8. Use two persons to remove traction control valve (3) from the final drive. The weight of
travel brake valve (3) is approximately 27 kg (60 lb).
3/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00940716
9. Remove valve plate (5) and O-ring seal (6).
Illustration 3 g01405139
10. Use Tooling (D) to remove bearing (7).
Disassembly of the Counterbalance Valve
Illustration 4 g01405725
4/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 5 g01405227
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Position the counterbalance valve, as shown. Remove plug (8) and adapter (9).
2. Remove spring (10) and spool (11).
Illustration 6 g01405232
5/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 3. Remove relief valve assemblies (12).
Illustration 7 g01405243
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove seat (13). Seat (13) is pressed onto valve (17). Use new parts if seat (13) or valve
(17) is damaged. Do not disassemble these components. Make sure that you reuse the other
component.
5. Remove backup ring (14) and O-ring seal (15).
6. Remove O-ring seal (22).
7. Remove nut (20).
8. Remove screw (27).
9. Remove stopper (26). Remove backup ring (19) and O-ring seal (18) from stopper (19).
10. Remove valve (21), piston (25), and spring (16) from the housing.
11. Remove backup ring (23) and O-ring seal (24) from piston (25).
6/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g01405284
Illustration 9 g01405299
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove covers (28) and the O-ring seals.
13. Remove springs (29), guides (30), and spool assembly (31).
7/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 10 g01405345
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove valve (32), spring (33), and ball (34) from one end of spool (35). Repeat for the
other end of spool (35).
Illustration 11 g01405633
8/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
15. Remove plug (36), spring (38), and piston (39) from both sides of the housing assembly.
16. Remove O-ring seal (37) from each plug (36).
Note: Remove the remaining allen head bolts from the housing assembly for cleaning
purposes, if necessary. Each allen head bolt has an O-ring seal. Check the O-ring seal for
wear or for damage. Replace the O-ring seal, if necessary.
Disassembly of the Travel Motor
Illustration 12 g01405794
1. Remove O-ring seal (40) and springs (41).
9/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 13 g01405828
2. Install Tooling (C) onto piston assembly (42). Use Tooling (C) and a suitable prybar to
remove piston assembly (42) from body (43).
Illustration 14 g01405855
3. Remove O-ring seals (45) and (46) from piston assembly (42). Remove backup rings (44)
and (47) from piston assembly (42).
10/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 15 g01405867
4. Use suitable drivers or a suitable lever to remove guide assembly (48).
Illustration 16 g01405885
5. Remove O-ring seal (49) and backup ring (50) from guide assembly (48).
11/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 17 g01406117
6. Remove four separator plates (51) and four friction plates (52). Note the alternating order of
separator plates (51) and friction plates (52) for assembly purposes.
Note: Do not allow the components of barrel assembly (53) to come apart while you
remove barrel assembly (53). The components of barrel assembly (53) must be reinstalled
into the original positions.
Note: Oil will drain from the final drive. Place a suitable container under the final drive for
storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for
the fluid capacity of the final drive.
7. Position the final drive horizontally.
8. Remove barrel assembly (53).
12/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 18 g01406180
Note: Mark the component locations for assembly purposes before you disassemble barrel
assembly (53).
9. Remove piston assemblies (54) and retainer (55) from barrel assembly (53).
Illustration 19 g01406210
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove retainer (56), spacer (57), and springs (58) from barrel assembly (53).
13/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 20 g01406263
11. Put location marks on cam plate (59) for assembly purposes. Make sure that the thick end of
cam plate (59) is adjacent to the opening that is across body (43). Remove cam plate (59).
Illustration 21 g01406329
Illustration 22 g01406338
14/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove piston (60) and spring (62).
13. Remove key (61).
Disassembly of the Final Drive
Illustration 23 g01406376
1. Use a suitable lifting device to position the final drive on Tooling (B), as shown. The weight
of the final drive is approximately 200 kg (441 lb).
2. Remove plugs (63). Remove the O-ring seals from plugs (63). Check the O-ring seals for
wear or for damage. Replace the O-ring seals, if necessary.
3. Remove bolts (65). Remove cover (64).
15/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 24 g01406386
4. Raise the temperature of bolts (66) in order to loosen the thread sealant.
5. Remove bolts (66) and plate (67).
Illustration 25 g01406397
6. Remove sun gear (68).
16/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 26 g01406400
7. Attach Tooling (A) and a suitable lifting device to carrier assembly (69). Remove carrier
assembly (69), planetary gear assembly (70), and bearing assembly (71) as a unit.
Illustration 27 g01406789
8. Remove planetary gear (70) and bearing assembly (71) from carrier assembly (69). Remove
the remaining planetary gears (70) and bearings (71).
Illustration 28 g01406822
9. Remove sun gear (72).
17/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 10. Raise the temperature of bolts (73) in order to loosen the thread sealant. Remove bolts (73).
Remove plate (74).
Illustration 29 g01406850
11. Remove retaining ring (75) from sun gear (72). Check retaining ring (75) for wear or for
damage. Replace retaining ring (75), if necessary.
Illustration 30 g01406853
12. Remove planetary gear (76).
18/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 31 g01406875
13. Remove bearing (77), race (78), and thrust washer (79).
14. Repeat Steps 12 and 13 in order to remove the remaining planetary gear assemblies.
Illustration 32 g01406882
15. Remove bolt (80) and plate (81).
19/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 33 g01406885
Illustration 34 g01406886
16. Use Tooling (H) to remove nut (82).
Illustration 35 g01406906
17. Install Tooling (A) and a suitable lifting device to housing (83). The weight of housing (83)
is approximately 35 kg (77 lb).
18. Remove housing (83) from body assembly (84).
20/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 36 g01406912
19. Remove Duo-Cone Seal Gp seal (85) from the body assembly. Remove the Duo-Cone Seal
Gp seal from the housing.
Illustration 37 g01407100
20. Remove both bearings (86) from housing (83).
21/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 38 g01407089
21. Remove both bearings (87) from housing (83).
Illustration 39 g01407115
22. Position body assembly (84) horizontally. Remove shaft assembly (88), the bearing, and the
retaining ring.
22/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 40 g01407144
23. Use Tooling (G) to remove retaining ring (89) from shaft assembly (88).
Illustration 41 g01407161
24. Use Tooling (E), Tooling (F), and a suitable press to remove bearing (90).
Illustration 42 g01407166
25. Remove lip seal (91) from the body assembly.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 13 23:37:00 UTC+0800 2020
23/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312F GC EXCAVATOR FKE
Configuration: 312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly
312F and 313F Excavators Machine Systems
Media Number -UENR6138-02 Publication Date -01/03/2015 Date Updated -14/12/2017
i07219742
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-5474 M16x2x24 mm Lifting Eye Assembly 2
B 1P-2420 Transmission Repair Stand 1
C 8H-0663 Bearing Puller Assembly 1
D 422-5473 M12x1.75x21 mm Lifting Eye Assembly 2
E 422-5472 M10x1.5x16 mm Lifting Eye Assembly 2
F 1U-9895 Crossblock 1
Start By:
a. Remove the final drive and the travel motor assembly.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/22
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor assembly. The weight of the
sprocket is approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
Illustration 1 g06256385
4. Use Tooling (A) and a suitable lifting device to position final drive assembly (1) onto
Tooling (B). The weight of final drive assembly (1) is approximately 163 kg (360 lb).
2/22
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. 5. Drain the oil from final drive assembly (1) into a suitable container for storage or for
disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity
of the final drive.
Illustration 2 g06256798
6. Remove plug (2), plugs (3), and the O-ring seals.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 3 g06256843
3/22
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...