The document provides assembly and disassembly instructions for a piston pump (hydrostatic) used in a 289D Compact Track Loader. It describes 40 steps for assembling the pump, including installing bearings, seals, shafts, pistons and housing components. It also lists required tools and provides illustrations for each step. Disassembly is performed in reverse order.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...ujfjdkkmsme
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly process involves using various tools to remove retaining rings, plates, springs, pistons, and bolts from the pump assembly. Detailed illustrations accompany each step. The assembly process reverses the disassembly steps and includes precautions like applying thread lock compound during reassembly.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...ufjjjskkmsmed
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly process involves using various tools to remove retaining rings, plates, springs, pistons, and bolts from the pump assembly. Detailed illustrations accompany each step. The assembly process reverses the disassembly steps and includes precautions like applying thread lock compound during reassembly.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...fjjskekskem
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly procedure includes removing 42 parts in 39 steps using various tools. The assembly procedure instructs installing the parts in reverse order.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...fhshefjjskefkem
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly process involves using various tools to remove retaining rings, plates, springs, pistons, and bolts from the pump assembly. Detailed illustrations accompany each step. The assembly process reverses the disassembly steps and includes precautions like applying thread lock compound during reassembly.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...fujsjefskekfksem
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly process involves using various tools to remove retaining rings, plates, springs, pistons, and bolts from the pump assembly. Detailed illustrations accompany each step. The assembly process reverses the disassembly steps and includes precautions like applying thread lock compound during reassembly.
Caterpillar cat 289 d compact track loader (prefix taw) service repair manual...fujskksemmk
This document provides instructions for removing, disassembling, and assembling a piston pump on a 289D Compact Track Loader. The removal procedure involves disconnecting hoses and harness assemblies, then using various tools to support and lift the pump out of position. The disassembly procedure lists each component that needs to be removed in order. The assembly procedure provides the reverse steps for installing each component back into the pump housing.
Caterpillar cat 289 d compact track loader (prefix taw) service repair manual...fksuekdjsekmmd
This document provides instructions for removing, disassembling, and assembling a piston pump on a 289D Compact Track Loader. The removal procedure involves disconnecting hoses and harnesses, then using various tools to support and lift the pump from the machine. The disassembly procedure lists each component that needs to be removed from the pump in sequential order. The assembly procedure lists the components and provides instructions for installing them in reverse order of disassembly.
Caterpillar cat 289 d compact track loader (prefix taw) service repair manual...udfjjsekkemm
This document provides instructions for removing, disassembling, and assembling a piston pump on a 289D Compact Track Loader. The removal procedure involves disconnecting hoses and harness assemblies, then using various tools to support and lift the pump out of position. The disassembly procedure lists each component that needs to be removed in order. The assembly procedure provides the reverse steps for installing each component back into the pump housing.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...ujfjdkkmsme
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly process involves using various tools to remove retaining rings, plates, springs, pistons, and bolts from the pump assembly. Detailed illustrations accompany each step. The assembly process reverses the disassembly steps and includes precautions like applying thread lock compound during reassembly.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...ufjjjskkmsmed
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly process involves using various tools to remove retaining rings, plates, springs, pistons, and bolts from the pump assembly. Detailed illustrations accompany each step. The assembly process reverses the disassembly steps and includes precautions like applying thread lock compound during reassembly.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...fjjskekskem
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly procedure includes removing 42 parts in 39 steps using various tools. The assembly procedure instructs installing the parts in reverse order.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...fhshefjjskefkem
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly process involves using various tools to remove retaining rings, plates, springs, pistons, and bolts from the pump assembly. Detailed illustrations accompany each step. The assembly process reverses the disassembly steps and includes precautions like applying thread lock compound during reassembly.
Caterpillar cat 289 d compact track loader (prefix wct) service repair manual...fujsjefskekfksem
The document provides instructions for disassembling and assembling the piston pump (hydrostatic) of a 289D Compact Track Loader. The disassembly process involves using various tools to remove retaining rings, plates, springs, pistons, and bolts from the pump assembly. Detailed illustrations accompany each step. The assembly process reverses the disassembly steps and includes precautions like applying thread lock compound during reassembly.
Caterpillar cat 289 d compact track loader (prefix taw) service repair manual...fujskksemmk
This document provides instructions for removing, disassembling, and assembling a piston pump on a 289D Compact Track Loader. The removal procedure involves disconnecting hoses and harness assemblies, then using various tools to support and lift the pump out of position. The disassembly procedure lists each component that needs to be removed in order. The assembly procedure provides the reverse steps for installing each component back into the pump housing.
Caterpillar cat 289 d compact track loader (prefix taw) service repair manual...fksuekdjsekmmd
This document provides instructions for removing, disassembling, and assembling a piston pump on a 289D Compact Track Loader. The removal procedure involves disconnecting hoses and harnesses, then using various tools to support and lift the pump from the machine. The disassembly procedure lists each component that needs to be removed from the pump in sequential order. The assembly procedure lists the components and provides instructions for installing them in reverse order of disassembly.
Caterpillar cat 289 d compact track loader (prefix taw) service repair manual...udfjjsekkemm
This document provides instructions for removing, disassembling, and assembling a piston pump on a 289D Compact Track Loader. The removal procedure involves disconnecting hoses and harness assemblies, then using various tools to support and lift the pump out of position. The disassembly procedure lists each component that needs to be removed in order. The assembly procedure provides the reverse steps for installing each component back into the pump housing.
Caterpillar cat 289 d compact track loader (prefix taw) service repair manual...ujsefksmemtyu
This document provides instructions for removing, disassembling, and assembling a piston pump on a 289D Compact Track Loader. It outlines the required tools and lists the step-by-step procedures for each process. The removal procedure involves disconnecting hoses and harnesses, then using various tools to support and lift the pump out of position. The disassembly procedure lists each component that must be removed from the pump. The assembly procedure outlines installing the components in reverse order of disassembly.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix EZW) Service Repair Manual ...f8seodkdmdmed3
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It lists required tools and outlines 34 steps to disassemble the pump, including removing valves, cartridges, seals and bearings. It then describes 27 steps to reassemble the pump, starting with pressing bearings back into place and ending by torquing the housing bolts. Diagrams illustrate each step for clear guidance on the pump assembly and disassembly process.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix EZW) Service Repair Manual ...ze6074xunong
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It lists required tools and outlines a step-by-step process including disconnecting hoses and harnesses, using lifting tools to support the pump, and removing bolts. The reassembly process is described in reverse order, noting steps like applying thread lock compound and centering the swashplate.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix EZW) Service Repair Manual ...tengtui535
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It lists required tools and outlines 34 steps to disassemble the pump, including removing valves, cartridges, seals and bearings. It then describes 27 steps to reassemble the pump, starting with pressing bearings back into place and ending by torquing the housing bolts. Diagrams illustrate each step for clear guidance on the pump assembly and disassembly process.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix EZW) Service Repair Manual ...f8usejkdmmd8i
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It lists required tools and outlines 34 steps to disassemble the pump, including removing valves, cartridges, seals and bearings. It then describes 27 steps to reassemble the pump, starting with pressing bearings back into place and ending by torquing the housing bolts. Diagrams illustrate each step for clear guidance on the pump assembly and disassembly process.
Caterpillar cat 257 d multi terrain loader (prefix ezw) service repair manual...ujfdjdjfkjksk
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It describes disconnecting hoses and harness assemblies, using various tools to support the pump during removal, and reversing the steps for installation. Detailed illustrations show each step in the disassembly and assembly process, including removing internal components like valves, seals, and bearings, and pressing them out or installing them back into place.
Caterpillar cat 257 d multi terrain loader (prefix ezw) service repair manual...ujfjjsjekkmsmd
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It describes disconnecting hoses and harnesses, using various tools to support the pump during removal, and reversing the steps for installation. Detailed illustrations show each step in the process.
Caterpillar cat 257 d multi terrain loader (prefix ezw) service repair manual...fjsjefskekfmme
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It describes disconnecting hoses and harness assemblies, using various tools to support the pump during removal, and reversing the steps for installation. The pump must be disassembled by removing valves, coils, cartridges, seals and other components. Assembly is the reverse of disassembly, including pressing bearings into place and installing retaining rings.
Caterpillar cat 257 d multi terrain loader (prefix ezw) service repair manual...fjjskekfsem
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It describes disconnecting hoses and harness assemblies, using various tools to support the pump during removal, and reversing the steps for installation. Detailed illustrations show each step in the disassembly and assembly process, including removing internal components like valves, seals, and bearings, and pressing them out or installing them back into place.
CASE IH Rowtrac 370 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH tractors and covers safety rules, engine systems, transmission systems, front and rear axle systems, power take-off systems, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering systems, wheels, tracks and suspensions, cab climate control, electrical systems, and bodywork. It provides maintenance and repair instructions for qualified service personnel.
CASE IH Quadtrac 620 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 580 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 540 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains information on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulic systems, frames, steering, wheels, tracks, cab climate control, and electrical systems. The manual is intended to assist technicians with servicing and repair.
CASE IH Quadtrac 500 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 470 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains information on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulic systems, frames, steering, wheels, tracks, cab climate control, and electrical systems. The manual is intended to assist technicians with servicing and repairs.
CASE IH PUMA 210 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual that contains information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It provides information on special tools needed for maintenance and repair of components within these various systems.
This document provides instructions for disassembling and assembling the travel motor of a 313D2 excavator. The disassembly process involves 27 steps to remove components like the motor head, brake piston, barrel assembly, springs and seals. The assembly process is outlined in 13 steps and provides details on cleaning, lubricating and installing components in the reverse order of disassembly. Special notes are provided regarding part orientations, identification marks and keys to ensure correct reassembly.
The document provides disassembly instructions for the final drive, travel motor, and various other components of 313D2 and 313D2 GC excavator models. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, gears, plates, and seals. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during the disassembly process. Detailed illustrations supplement the text instructions.
Caterpillar Cat 313F L Excavator (Prefix NLG) Service Repair Manual (NLG00001...f8usejkddmmd
This document provides instructions for removing the front housing on a C4.4 engine. It involves:
1. Removing various other components first like the fan, pulley, oil pan, gears, and pump.
2. Disconnecting a harness, cutting a cable strap, and removing bolts to detach a bypass tube.
3. Removing bolts of different lengths to separate the front housing from the engine. Care must be taken to properly contain fluids.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists over 30 detailed steps to disassemble components like the final drive, travel motor barrel assembly, planetary gear assembly, counterbalance valve housing assembly, and more. Safety notices are provided throughout to warn of hazards like released spring forces, hot or pressurized components, and ensuring fluids are contained. Required specialty tools are listed at the start for tasks like removing bearings, pistons, and other parts.
The document provides disassembly instructions for the final drive, travel motor, and various other components of 313D2 and 313D2 GC excavator models. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, gears, plates, and seals. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during the disassembly process. Detailed illustrations supplement the text instructions.
This document provides instructions for removing the front housing on a C4.4 engine. It involves:
1. Removing various other components first like the fan, crankshaft pulley, oil pan, accessory drive, water pump and timing gears.
2. Disconnecting a harness assembly and removing bolts that secure a bypass tube to the front housing.
3. Removing bolts of various lengths that secure the front housing, and then removing the front housing from the engine.
More Related Content
Similar to Caterpillar Cat 289D COMPACT TRACK LOADER (Prefix WCT) Service Repair Manual (WCT00001 and up).pdf
Caterpillar cat 289 d compact track loader (prefix taw) service repair manual...ujsefksmemtyu
This document provides instructions for removing, disassembling, and assembling a piston pump on a 289D Compact Track Loader. It outlines the required tools and lists the step-by-step procedures for each process. The removal procedure involves disconnecting hoses and harnesses, then using various tools to support and lift the pump out of position. The disassembly procedure lists each component that must be removed from the pump. The assembly procedure outlines installing the components in reverse order of disassembly.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix EZW) Service Repair Manual ...f8seodkdmdmed3
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It lists required tools and outlines 34 steps to disassemble the pump, including removing valves, cartridges, seals and bearings. It then describes 27 steps to reassemble the pump, starting with pressing bearings back into place and ending by torquing the housing bolts. Diagrams illustrate each step for clear guidance on the pump assembly and disassembly process.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix EZW) Service Repair Manual ...ze6074xunong
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It lists required tools and outlines a step-by-step process including disconnecting hoses and harnesses, using lifting tools to support the pump, and removing bolts. The reassembly process is described in reverse order, noting steps like applying thread lock compound and centering the swashplate.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix EZW) Service Repair Manual ...tengtui535
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It lists required tools and outlines 34 steps to disassemble the pump, including removing valves, cartridges, seals and bearings. It then describes 27 steps to reassemble the pump, starting with pressing bearings back into place and ending by torquing the housing bolts. Diagrams illustrate each step for clear guidance on the pump assembly and disassembly process.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix EZW) Service Repair Manual ...f8usejkdmmd8i
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It lists required tools and outlines 34 steps to disassemble the pump, including removing valves, cartridges, seals and bearings. It then describes 27 steps to reassemble the pump, starting with pressing bearings back into place and ending by torquing the housing bolts. Diagrams illustrate each step for clear guidance on the pump assembly and disassembly process.
Caterpillar cat 257 d multi terrain loader (prefix ezw) service repair manual...ujfdjdjfkjksk
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It describes disconnecting hoses and harness assemblies, using various tools to support the pump during removal, and reversing the steps for installation. Detailed illustrations show each step in the disassembly and assembly process, including removing internal components like valves, seals, and bearings, and pressing them out or installing them back into place.
Caterpillar cat 257 d multi terrain loader (prefix ezw) service repair manual...ujfjjsjekkmsmd
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It describes disconnecting hoses and harnesses, using various tools to support the pump during removal, and reversing the steps for installation. Detailed illustrations show each step in the process.
Caterpillar cat 257 d multi terrain loader (prefix ezw) service repair manual...fjsjefskekfmme
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It describes disconnecting hoses and harness assemblies, using various tools to support the pump during removal, and reversing the steps for installation. The pump must be disassembled by removing valves, coils, cartridges, seals and other components. Assembly is the reverse of disassembly, including pressing bearings into place and installing retaining rings.
Caterpillar cat 257 d multi terrain loader (prefix ezw) service repair manual...fjjskekfsem
The document provides instructions for removing and installing a piston pump on a 257D Multi Terrain Loader. It describes disconnecting hoses and harness assemblies, using various tools to support the pump during removal, and reversing the steps for installation. Detailed illustrations show each step in the disassembly and assembly process, including removing internal components like valves, seals, and bearings, and pressing them out or installing them back into place.
Similar to Caterpillar Cat 289D COMPACT TRACK LOADER (Prefix WCT) Service Repair Manual (WCT00001 and up).pdf (9)
CASE IH Rowtrac 370 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH tractors and covers safety rules, engine systems, transmission systems, front and rear axle systems, power take-off systems, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering systems, wheels, tracks and suspensions, cab climate control, electrical systems, and bodywork. It provides maintenance and repair instructions for qualified service personnel.
CASE IH Quadtrac 620 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 580 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 540 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains information on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulic systems, frames, steering, wheels, tracks, cab climate control, and electrical systems. The manual is intended to assist technicians with servicing and repair.
CASE IH Quadtrac 500 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Each section provides information and specifications to service and repair the components.
CASE IH Quadtrac 470 Tier 4B (final) Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2014 and up that meet Tier 4B emissions standards. It contains information on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulic systems, frames, steering, wheels, tracks, cab climate control, and electrical systems. The manual is intended to assist technicians with servicing and repairs.
CASE IH PUMA 210 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual that contains information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It provides information on special tools needed for maintenance and repair of components within these various systems.
This document provides instructions for disassembling and assembling the travel motor of a 313D2 excavator. The disassembly process involves 27 steps to remove components like the motor head, brake piston, barrel assembly, springs and seals. The assembly process is outlined in 13 steps and provides details on cleaning, lubricating and installing components in the reverse order of disassembly. Special notes are provided regarding part orientations, identification marks and keys to ensure correct reassembly.
The document provides disassembly instructions for the final drive, travel motor, and various other components of 313D2 and 313D2 GC excavator models. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, gears, plates, and seals. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during the disassembly process. Detailed illustrations supplement the text instructions.
Caterpillar Cat 313F L Excavator (Prefix NLG) Service Repair Manual (NLG00001...f8usejkddmmd
This document provides instructions for removing the front housing on a C4.4 engine. It involves:
1. Removing various other components first like the fan, pulley, oil pan, gears, and pump.
2. Disconnecting a harness, cutting a cable strap, and removing bolts to detach a bypass tube.
3. Removing bolts of different lengths to separate the front housing from the engine. Care must be taken to properly contain fluids.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists over 30 detailed steps to disassemble components like the final drive, travel motor barrel assembly, planetary gear assembly, counterbalance valve housing assembly, and more. Safety notices are provided throughout to warn of hazards like released spring forces, hot or pressurized components, and ensuring fluids are contained. Required specialty tools are listed at the start for tasks like removing bearings, pistons, and other parts.
The document provides disassembly instructions for the final drive, travel motor, and various other components of 313D2 and 313D2 GC excavator models. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, gears, plates, and seals. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during the disassembly process. Detailed illustrations supplement the text instructions.
This document provides instructions for removing the front housing on a C4.4 engine. It involves:
1. Removing various other components first like the fan, crankshaft pulley, oil pan, accessory drive, water pump and timing gears.
2. Disconnecting a harness assembly and removing bolts that secure a bypass tube to the front housing.
3. Removing bolts of various lengths that secure the front housing, and then removing the front housing from the engine.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists the required tools and parts and outlines 16 steps to disassemble the final drive, 13 steps to disassemble the travel motor, and 15 steps to disassemble the counterbalance valve. Safety notices are included regarding releasing pressures and springs.
This document provides instructions for disassembling the final drive, travel motor, and various other components of a 313D2 excavator. It lists the required tools and safety precautions and then outlines 16 steps to disassemble parts like the final drive, traction control valve, counterbalance valve, travel motor, and barrel assembly. Detailed illustrations are provided to identify specific components as they are removed.
CASE IH PUMA 195 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH PUMA tractors that contains sections covering the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. The introduction provides safety rules for working on the tractor.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313D2 excavator. It lists required tools and outlines 15 steps to disassemble the final drive, including draining oil and removing sprockets, valves, and bearings. It then details 19 steps to disassemble the travel motor, removing seals, plates, pistons, and the barrel assembly. Safety cautions are provided throughout regarding contained fluids, pressurized components, and released spring forces.
The document provides instructions for removing and installing various engine components on a Caterpillar 313D excavator. Specifically, it details procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear from the front gear group. The instructions include lists of required tools and step-by-step processes with illustrations for each procedure.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. These include draining fluids, removing covers, plates, seals, springs, pistons, and other parts. Safety precautions are provided to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
Caterpillar Cat 312D2 L Excavator (Prefix MPP) Service Repair Manual (MPP0000...f8usejkddmmd
This document provides instructions for disassembling various components of an excavator final drive and travel motor system. It outlines 16 steps to disassemble the final drive which include draining fluids, removing fittings and valves, and using tools to pull bearings. It also details 14 steps to disassemble the travel motor which involve removing seals, pistons, plates and springs. Safety cautions are provided throughout regarding releasing pressures and spring forces.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
6. 15. Install set screw (23). Apply slight pressure to the piston assembly.
16. Repeat Step 15 for the opposite side.
17. Use a suitable measuring device to center the swashplate. Measure the distance that is from
the machined face of the housing to both sides of the swashplate. Adjust setscrews (23) to
achieve the same distance to the swashplate.
18. Install retainer (24), and bolts (25).
Illustration 9 g06063253
19. Install barrel assembly (40).
Illustration 10 g06063248
5/10
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 11 g06063242
20. Install bearings (39).
21. Install port plate (36) and gasket (35).
22. Install head (38).
23. Install coupling (37).
Illustration 12 g01325564
24. Repeat Steps16 through Steps 23 for barrel assembly (34).
25. Install barrel assembly (34).
Illustration 13 g01325541
26. Install housing (22) and bolts (21). Tighten bolts (21) to a torque of 110 ± 10 N·m
(81 ± 7 lb ft).
6/10
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g01377507
Illustration 15 g01377504
27. Install crossover relief valves (14B), backup ring (14D), O-ring seal (14C), O-ring seal
(14E) and plugs (14A) into the head.
Illustration 16 g01325540
28. Install O-ring seal (20), backup ring (19), and O-ring seal (18).
7/10
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 17 g01325538
29. Install O-ring seals (17), backup rings (16), and O-ring seal (15).
Illustration 18 g01325536
30. Install valve (11). Tighten valve (11) to a torque of 44 ± 3 N·m (32 ± 2 lb ft).
31. Install cartridge (14), coil (12), and nut (13). Tighten nut (13) to a torque of 80 ± 10 N·m
(59 ± 7 lb ft).
32. Install the cross over relief valves and the plugs into the head. Tighten plugs (21) to a torque
of 110 ± 10 N·m (81 ± 7 lb ft).
Illustration 19 g01377500
8/10
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 33. Install screen (6A).
Illustration 20 g01325526
34. Install cartridge (6), bolts (5), coil (4), the O-ring seal, and nut (3). Tighten bolts (5) to a
torque of 5.5 ± 0.1 N·m (49 ± 0.9 lb in).
Illustration 21 g01325527
35. Install control arm (8) and gasket (7).
36. Apply Tooling (E) to control arm (8).
9/10
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 22 g01325534
37. Install valve (10) and bolts (9). Tighten bolts (9) to a torque of 13 ± 1 N·m (115 ± 9 lb in).
Illustration 23 g01325524
38. Repeat Steps 34 through Steps 35 for valve (2).
39. Install bolts (1) and valve (2). Tighten bolts (1) to a torque of 13 ± 1 N·m (115 ± 9 lb in).
40. Bench test the pump before installation into the machine.
End By:
a. Install the pump. Refer to Disassembly and Assembly, "Piston Pump (Hydrostatic) -
Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 24 00:03:56 UTC+0800 2019
10/10
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B ...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 289D COMPACT TRACK LOADER WCT
Configuration: 289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D,
297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and
272D XHP Skid Steer Loaders Power Train
Media Number -UENR3730-09 Publication Date -01/05/2015 Date Updated -13/08/2018
i06018552
Piston Motor (Hydrostatic) - Remove and Install - CTL
SMCS - 5058-010
S/N - A9Z1-UP
S/N - FTK1-UP
S/N - FTL1-UP
S/N - GTC1-UP
S/N - GTK1-UP
S/N - GTL1-UP
S/N - JST1-UP
S/N - PPT1-UP
S/N - RCX1-UP
S/N - TAW1-UP
S/N - WCT1-UP
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 2
1/3
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g02877139
5. Attach Tooling (A) and a suitable lifting device to piston motor (5). The weight of the
piston motor (5) is approximately 91 kg (200 lb).
Illustration 4 g01524029
Note: Note the orientation of motor.
6. Remove bolts (6). Remove piston motor (5).
Installation Procedure
1. Install piston motor (5) in the reverse order of removal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 24 00:04:52 UTC+0800 2019
3/3
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 289D COMPACT TRACK LOADER WCT
Configuration: 289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D,
297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and
272D XHP Skid Steer Loaders Power Train
Media Number -UENR3730-09 Publication Date -01/05/2015 Date Updated -13/08/2018
i07085921
Piston Motor (Hydrostatic) - Disassemble - CTL
SMCS - 4351-015
S/N - A9Z1-UP
S/N - FTK1-UP
S/N - FTL1-UP
S/N - GTC1-UP
S/N - GTK1-UP
S/N - GTL1-UP
S/N - JST1-UP
S/N - PPT1-UP
S/N - RCX1-UP
S/N - TAW1-UP
S/N - WCT1-UP
Disassembly Procedure
Table 1
Required Tools
Tools Part Number Part Description Qty
A 136-1452 Retaining Ring Pliers 1
1/19
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. B 6V-2062 Tips 1
C 1P-0074 Slide Hammer Puller Gp 1
D 4C-5651 Threaded Adapter 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G
426-2717 Reaction Plate 1
8T-7338 Bolt 4
9X-8268 Washer 4
H 5F-7339 Adapter 1
J
385-8578 Hydraulic Wrench 1
385-8589 Reaction Arm Assembly 1
426-2719 Block Assembly 1
J
132-8126 Hydraulic Wrench(1)
1
237-3952 Reaction Arm Assembly(2)
1
426-2720 Block Assembly(2)
1
K
308-5676 Spanner Wrench Assembly(3)
1
329-1669 Spanner Wrench Assembly(4)
1
308-5675 Driver Assembly 1
426-2723 Adapter 1
L
385-8479
Hydraulic Pump Gp
115v
1
384-8916
Hydraulic Pump Gp
208-240v
1
M 1H-3110 Bearing Puller Gp 1
(1)
Can be used in place of 385-8578 Hydraulic Wrench.
(2)
For use with 132-8126 Hydraulic Wrench only.
(3)
6 Pin
(4)
7 Pin
Start By:
a. Remove the piston motor.
b. Refer to Service Magazine, M0084409, "New Tools Are Available for Drive Motor Service
on All Compact Track Loaders" for dealer built bench option and alternative tooling.
2/19
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 1 g03354906
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Use suitable press, Tooling (A), and (B) to remove retaining ring (1) from head (2).
Illustration 2 g03354917
2. Remove plate (3).
3/19
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Illustration 3 g03354920
3. Remove springs (4).
Illustration 4 g03355153
4. Use Tooling (C) and Tooling (D) to remove piston (5).
Illustration 5 g03354936
5. Remove bolts (6) from head (7).
4/19
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 6 g03355200
Illustration 7 g03354980
6. Remove head (7) though pushing down on shaft (8) to keep the rotating group from being
removed with head (7).
Illustration 8 g03355274
7. Remove backup ring (9), O-ring seal (10), O-ring seal (11), and backup ring (12).
5/19
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 9 g03355217
8. Remove shaft (13), friction discs (14), and plates (15).
Illustration 10 g03355225
9. Remove port plate (16) from head (7).
Illustration 11 g03355229
6/19
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 12 g03355261
10. Use Tooling (E) to remove seal (18) and bearing (17) from head (7).
Illustration 13 g03354486
11. Remove bolt (19) and speed sensor (20).
Illustration 14 g03354509
12. Remove O-ring seal (21) from speed sensor (20).
7/19
289D Compact Track Loader WCT00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...