This document provides disassembly instructions for the rear axle, differential, and final drive of a 14M3 motor grader. It lists 42 steps to completely disassemble these components, including removing sprockets, bearings, seals, housings, and other parts. Various tools are required, and safety precautions are noted. Weights and part numbers are provided for each removed component.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...jdksmmdmdd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removing each part safely. Weights of removed parts are given to assist with lifting and handling.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...ze6074xunong
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fujkse9didkke3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fuusejkddmmd3e
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove components like sprockets, bearings, seals, housings, and shafts. Detailed illustrations accompany each step to show positioning of tools and components being removed. Cautions are provided about keeping parts clean and noting order and quantities of shims during disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...f8usejkdmmd8i
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removal. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...orrf0370383
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for separating each part in the correct order. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...f8seodkdmdmed3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Safety notices are included to properly support heavy components and avoid injury from released spring forces during disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...dujkdksmdmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...jdksmmdmdd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removing each part safely. Weights of removed parts are given to assist with lifting and handling.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...ze6074xunong
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fujkse9didkke3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fuusejkddmmd3e
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove components like sprockets, bearings, seals, housings, and shafts. Detailed illustrations accompany each step to show positioning of tools and components being removed. Cautions are provided about keeping parts clean and noting order and quantities of shims during disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...f8usejkdmmd8i
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removal. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...orrf0370383
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for separating each part in the correct order. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...f8seodkdmdmed3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Safety notices are included to properly support heavy components and avoid injury from released spring forces during disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...dujkdksmdmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...fjsekdmmeed
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and disassembles components such as sprockets, bearings, seals, gears, housings, and shafts. Safety notices are included to properly handle parts and avoid injury. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...fjjsekkdmme
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and disassembles components such as sprockets, bearings, seals, gears, housings, and shafts. Safety notices are included to properly handle parts and avoid injury. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...hean57759707
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed, including sprockets, gears, seals, bearings, housings, and other components. Detailed illustrations are provided for each step to ensure safe and proper disassembly. Workers are advised to keep all parts clean and note the order of any shims or parts for reassembly.
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...dkdmidkkdk
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removal. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fjkdksmmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...fuusejkddmmd3e
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and what fasteners, tools, and equipment are needed.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...dujkdksmdmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and which fasteners, tools, and equipment are needed.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...f8usejkdmmd8i
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 3 sentences or less:
It outlines 42 steps to disassemble the rear axle, differential, and final drive components, including removing sprockets, bearings, seals, gears, housings, and other parts, using various tools like link brackets, sleeves, levers, bolts, and pullers. Precautions are given to note shim quantities and orders, keep parts clean, and support heavy components during removal. Detailed illustrations accompany each step.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...jdksmmdmdd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
The document outlines 50 steps to disassemble the rear axle, differential, and final drive of a 16M Motor Grader, requiring various tools and lifting devices to remove components like sprockets, bearings, seals, gears, and housings. Precautions are provided to note shim quantities and orders. Detailed illustrations accompany each step to correctly disassemble the power train components.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...f8seodkdmdmed3
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove each component in the proper order. Key steps include using lifting devices and pullers to remove the sprockets, housing, carrier assembly, pinion, and differential parts. Detailed illustrations are provided for each step. Proper documentation of shims and seals is emphasized to ensure correct reassembly.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...ze6074xunong
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove each component in the proper order. Key steps include using lifting devices and pullers to remove the sprockets, housing, carrier assembly, pinion, and differential parts. Detailed illustrations are provided for each step. Proper documentation of shims and seals is emphasized to ensure correct reassembly.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...fujkse9didkke3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It details removing components such as sprockets, bearings, seals, gears, housings, and shafts. Precautions are given to note shim quantities and orders. Tools required include link brackets, sleeves, pullers, bolts, sockets, and presses. Personnel are warned of component weights up to approximately 1588 kg to avoid injury.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...orrf0370383
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and which fasteners, tools, and equipment are used.
Caterpillar cat 16 m motor grader (prefix r9h) service repair manual (r9h0000...fjsekdmmeed
This document provides disassembly instructions for a 16M motor grader rear axle, differential, and final drive. It lists 50 steps to fully disassemble these components, including removing gears, shafts, seals, housings, and other parts. Various tools are required, and weights of removed parts are provided. Detailed illustrations accompany each step to show how to position the components and which fasteners, seals, or other pieces to remove.
Caterpillar cat 16 m motor grader (prefix r9h) service repair manual (r9h0000...dkdmidkkdk
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It details removing components such as sprockets, bearings, seals, gears, housings, and shafts. Precautions are given to note shim quantities and orders. Tools required include link brackets, sleeves, pullers, bolts, sockets, and presses. Personnel are warned of component weights up to approximately 1588 kg to avoid injury.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...hean57759707
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and noting weights of removed parts. Detailed illustrations accompany each step to show components and tooling placement. Safety notices are included and components are to be kept clean from contaminants to prevent damage.
The document provides instructions for removing and installing various components of an excavator engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, and exhaust manifold. The procedures include required tools, safety warnings, step-by-step instructions, and torque specifications for reinstallation.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools. Precautions are provided to retain component positioning for reassembly and to contain hydraulic fluids.
This document provides disassembly instructions for the travel motor on a 336F L XE excavator. It lists 27 steps to fully disassemble the travel motor, including removing the head, springs, relief valves, pistons, barrel assembly, swashplate and other internal components. Detailed illustrations accompany each step to show how to properly remove parts and note their positions for reassembly. Safety precautions are provided to warn of potential spring forces and contain fluids during disassembly.
Caterpillar Cat 336F L XE Excavator (Prefix MTW) Service Repair Manual (MTW00...jdksmmdmdd
This document provides disassembly instructions for a travel motor on a 336F LN XE excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Detailed illustrations accompany each step to show how to remove each part in the proper sequence. Safety precautions are provided to warn of potential spring forces and contain fluids during disassembly. Required tools are listed that will be needed to complete the process.
Caterpillar Cat 336F L XE Excavator (Prefix YBH) Service Repair Manual (YBH00...jdksmmdmdd
This document provides instructions for disassembling the travel motor on a 336F LNXE excavator. The 27 step procedure includes removing components like the motor head assembly, barrel assembly, piston assemblies, springs, seals, plates and more. Special care must be taken when removing components under spring pressure. Tools and safety precautions are listed for each step. The goal is to disassemble all parts while keeping them organized for proper reassembly.
This document provides instructions to disassemble a travel motor on a 349F and 349F L excavator. It outlines 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, port plate, springs, seals, bearings, valves and more. Precautions are provided to be aware of parts under spring force. Various specialized tools are required to properly support, attach, extract and remove components from the motor.
More Related Content
Similar to Caterpillar Cat 14M3 Motor Grader (Prefix N9S) Service Repair Manual (N9S00001 and up).pdf
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...fjsekdmmeed
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and disassembles components such as sprockets, bearings, seals, gears, housings, and shafts. Safety notices are included to properly handle parts and avoid injury. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...fjjsekkdmme
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and disassembles components such as sprockets, bearings, seals, gears, housings, and shafts. Safety notices are included to properly handle parts and avoid injury. Detailed illustrations accompany each step to ensure correct disassembly.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual Instant D...hean57759707
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed, including sprockets, gears, seals, bearings, housings, and other components. Detailed illustrations are provided for each step to ensure safe and proper disassembly. Workers are advised to keep all parts clean and note the order of any shims or parts for reassembly.
Caterpillar cat 16 m motor grader (prefix b9h) service repair manual (b9h0000...dkdmidkkdk
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It lists all required tools and parts to be removed at each step, including sprockets, gears, seals, bearings, and housing components. Detailed illustrations are provided to show how to position the components and which tools to use for removal. Safety notices are included to handle parts carefully and avoid injury due to heavy weights being removed.
Caterpillar Cat 16M Motor Grader (Prefix B9H) Service Repair Manual (B9H00001...fjkdksmmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader. It lists over 40 steps to completely disassemble these components, including removing sprockets, housings, gears, seals, bearings and other parts. Various specialized tools are required to separate components and properly disassemble the power train. Photos and diagrams are included to illustrate each step.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...fuusejkddmmd3e
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and what fasteners, tools, and equipment are needed.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...dujkdksmdmdm
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and which fasteners, tools, and equipment are needed.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...f8usejkdmmd8i
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 3 sentences or less:
It outlines 42 steps to disassemble the rear axle, differential, and final drive components, including removing sprockets, bearings, seals, gears, housings, and other parts, using various tools like link brackets, sleeves, levers, bolts, and pullers. Precautions are given to note shim quantities and orders, keep parts clean, and support heavy components during removal. Detailed illustrations accompany each step.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...jdksmmdmdd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
The document outlines 50 steps to disassemble the rear axle, differential, and final drive of a 16M Motor Grader, requiring various tools and lifting devices to remove components like sprockets, bearings, seals, gears, and housings. Precautions are provided to note shim quantities and orders. Detailed illustrations accompany each step to correctly disassemble the power train components.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...f8seodkdmdmed3
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove each component in the proper order. Key steps include using lifting devices and pullers to remove the sprockets, housing, carrier assembly, pinion, and differential parts. Detailed illustrations are provided for each step. Proper documentation of shims and seals is emphasized to ensure correct reassembly.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...ze6074xunong
This document provides instructions to disassemble the rear axle, differential, and final drive of a 16M Motor Grader. It lists over 40 steps and required tools to remove each component in the proper order. Key steps include using lifting devices and pullers to remove the sprockets, housing, carrier assembly, pinion, and differential parts. Detailed illustrations are provided for each step. Proper documentation of shims and seals is emphasized to ensure correct reassembly.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...fujkse9didkke3
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It details removing components such as sprockets, bearings, seals, gears, housings, and shafts. Precautions are given to note shim quantities and orders. Tools required include link brackets, sleeves, pullers, bolts, sockets, and presses. Personnel are warned of component weights up to approximately 1588 kg to avoid injury.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual (R9H00001...orrf0370383
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and lifting devices to remove parts like sprockets, bearings, seals, gears, and housings. Precautions are given to note shim quantities and orders and avoid contaminating or damaging parts during disassembly. Detailed illustrations accompany each step to show how to position parts and which fasteners, tools, and equipment are used.
Caterpillar cat 16 m motor grader (prefix r9h) service repair manual (r9h0000...fjsekdmmeed
This document provides disassembly instructions for a 16M motor grader rear axle, differential, and final drive. It lists 50 steps to fully disassemble these components, including removing gears, shafts, seals, housings, and other parts. Various tools are required, and weights of removed parts are provided. Detailed illustrations accompany each step to show how to position the components and which fasteners, seals, or other pieces to remove.
Caterpillar cat 16 m motor grader (prefix r9h) service repair manual (r9h0000...dkdmidkkdk
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M motor grader in 50 steps. It details removing components such as sprockets, bearings, seals, gears, housings, and shafts. Precautions are given to note shim quantities and orders. Tools required include link brackets, sleeves, pullers, bolts, sockets, and presses. Personnel are warned of component weights up to approximately 1588 kg to avoid injury.
Caterpillar Cat 16M Motor Grader (Prefix R9H) Service Repair Manual Instant D...hean57759707
This document provides disassembly instructions for the rear axle, differential, and final drive of a 16M Motor Grader in 3 sentences or less:
It outlines 50 steps to disassemble the rear axle, differential, and final drive components of a 16M Motor Grader, requiring various tools and noting weights of removed parts. Detailed illustrations accompany each step to show components and tooling placement. Safety notices are included and components are to be kept clean from contaminants to prevent damage.
Similar to Caterpillar Cat 14M3 Motor Grader (Prefix N9S) Service Repair Manual (N9S00001 and up).pdf (16)
The document provides instructions for removing and installing various components of an excavator engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, and exhaust manifold. The procedures include required tools, safety warnings, step-by-step instructions, and torque specifications for reinstallation.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools. Precautions are provided to retain component positioning for reassembly and to contain hydraulic fluids.
This document provides disassembly instructions for the travel motor on a 336F L XE excavator. It lists 27 steps to fully disassemble the travel motor, including removing the head, springs, relief valves, pistons, barrel assembly, swashplate and other internal components. Detailed illustrations accompany each step to show how to properly remove parts and note their positions for reassembly. Safety precautions are provided to warn of potential spring forces and contain fluids during disassembly.
Caterpillar Cat 336F L XE Excavator (Prefix MTW) Service Repair Manual (MTW00...jdksmmdmdd
This document provides disassembly instructions for a travel motor on a 336F LN XE excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Detailed illustrations accompany each step to show how to remove each part in the proper sequence. Safety precautions are provided to warn of potential spring forces and contain fluids during disassembly. Required tools are listed that will be needed to complete the process.
Caterpillar Cat 336F L XE Excavator (Prefix YBH) Service Repair Manual (YBH00...jdksmmdmdd
This document provides instructions for disassembling the travel motor on a 336F LNXE excavator. The 27 step procedure includes removing components like the motor head assembly, barrel assembly, piston assemblies, springs, seals, plates and more. Special care must be taken when removing components under spring pressure. Tools and safety precautions are listed for each step. The goal is to disassemble all parts while keeping them organized for proper reassembly.
This document provides instructions to disassemble a travel motor on a 349F and 349F L excavator. It outlines 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, port plate, springs, seals, bearings, valves and more. Precautions are provided to be aware of parts under spring force. Various specialized tools are required to properly support, attach, extract and remove components from the motor.
Caterpillar Cat 349E L Excavator (Prefix FJB) Service Repair Manual (FJB00001...jdksmmdmdd
The document provides instructions for disassembling and assembling a hydraulic fan drive for an excavator. It details 22 steps for disassembly, removing components like bolts, retainers, seals, discs, and housing pieces. It then details 14 steps for reassembly, including pressing in bearings and seals, installing retaining rings, and pressing the shaft assembly back into place using the proper tools. Cleanliness is emphasized throughout to prevent contamination of precision components.
Caterpillar Cat 349E L Excavator (Prefix KFX) Service Repair Manual (KFX00001...jdksmmdmdd
The document provides instructions for disassembling and assembling a travel motor on a 349E L VG excavator. It includes 27 steps for disassembly and 18 steps for assembly. Key parts that are removed and installed include the head assembly, brake housing, rotating group, barrel assembly, pistons, bearings and seals. Tools and torque specifications are provided for correct disassembly and reassembly.
The document provides step-by-step instructions to disassemble a travel motor on an excavator model 349F L. It details 27 steps to remove components such as plugs, seals, springs, pistons, plates, and housings. Personal protective equipment is recommended when removing parts with stored spring energy. Tools include lifting devices, bolts, nuts, and specialized pullers and presses. Drained fluids must be contained and disposed of properly.
Caterpillar Cat 349E L Excavator (Prefix MPZ) Service Repair Manual (MPZ00001...jdksmmdmdd
This document provides instructions for removing and installing a crankshaft vibration damper and pulley on a 349E L excavator. The procedure involves removing the fan drive, support brackets, drive belt, and bolts securing the pulley assembly. Tooling such as guide studs is used to support the pulley assembly during removal. The installation procedure is the reverse of removal. Proper torque is applied to the securing bolts.
This document provides instructions for disassembling and assembling the travel motor on a 349E excavator. The disassembly process includes 27 steps to remove components like the head assembly, brake housing, rotating group, barrel assembly and more. The assembly process reverses the disassembly with 13 steps like installing seals, springs, pistons and plates in the proper order and orientation. Precise torques and specifications are provided to ensure correct reassembly.
Caterpillar Cat 349D2 L Excavator (Prefix RAN) Service Repair Manual (RAN0000...jdksmmdmdd
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components such as the head, plates, seals, pistons, and housing. Precautions are provided to keep parts clean and in correct orientation during reassembly.
This document provides instructions for removing and installing the rear gear group on a 349D2 and 349D2 L excavator powered by a C13 engine. The removal procedure involves 11 steps including removing bolts, gears, seals, bushings and bearings. The installation procedure involves 12 steps including lowering temperatures of bearings before installation, applying sealant to bolts, and ensuring proper dimensions are met. Tools including drivers and installer are required.
The document provides instructions for disassembling a travel motor. It lists the required tools and gives step-by-step instructions to remove parts like the head, plates, seals, pins, and more. Safety notices are included to handle parts carefully and avoid contamination when disassembling components.
Caterpillar Cat 349D2 L Excavator (Prefix GAX) Service Repair Manual (GAX0000...jdksmmdmdd
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, and pins. It then lists 31 steps for assembly, reinstalling these components in reverse order and noting to clean all parts and replace seals and gaskets. Precautions are provided to contain fluids, mark parts locations, and avoid contaminating the hydraulic system.
The document provides instructions for removing and installing various components of an excavator engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, and exhaust manifold. The procedures include required tools, safety warnings, step-by-step instructions, and torque specifications for reinstallation.
This document provides instructions for removing and installing various engine components on a C13 engine, including:
1. Removing the rear gear group by removing bolts, seals, gears, bushings, and bearings.
2. Removing the flywheel by attaching lifting tools and removing bolts.
3. Removing the crankshaft rear seal by removing bolts. Detailed steps and illustrations are provided for each procedure. Required tools are listed.
This document provides instructions for disassembling and assembling a travel motor. It begins with removing external components like plates and seals. It then describes removing the head, brake piston, disks, and rotating group. Components like the shaft, bearings, and pistons are then removed from the rotating group. Reassembly involves reversing these steps and ensuring components like O-rings and washers are properly installed. Precautions are provided to prevent contamination and correctly identify parts.
Caterpillar Cat 336D2 L Excavator (Prefix FAJ) Service Repair Manual (FAJ0000...jdksmmdmdd
This document provides disassembly instructions for a travel motor on a 336D2 excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, springs, seals, and plates. Special care must be taken when removing or handling components with stored spring energy to avoid personal injury. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools.
This document provides instructions for disassembling the travel motor on 336D2 XE and 336D2 LXE excavator models. It outlines 27 steps to remove parts like the motor head assembly, springs, pistons, seals, plates and other components. Various tools are required including bolts, retaining ring pliers, drivers and pullers. Precautions are mentioned to relieve spring pressure safely and contain fluids. The process yields individual parts to allow inspection and replacement of worn items.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 14M3 MOTOR GRADER N9S
Configuration: 14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
14M3 Motor Grader Power Train
Media Number -M0067666-01 Publication Date -01/05/2017 Date Updated -16/05/2017
i06595544
Rear Axle, Differential and Final Drive - Disassemble
SMCS - 3258-015; 3278-015; 3282-015-RE; 4050-015; 4068-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Bracket As 4
B 140-7742 Sleeve 2
C 1U-9200 Lever Puller Hoist 1
D
154-6182 Forcing Bolt 3
154-6360 Forcing Bolt(1)
3
Reaction Plate
1/4 in. Steel
3
E
1D-4601 Bolt 2
4K-0367 Full Nut 2
150-1782 Crossblock 1
5B-0637 High Idle Nut 1
5F-7366 Forcing Screw 1
1P-0520 Driver Gp 1
3H-0465 Push-Puller Plate 2
F 439-3939 Link Bracket As 2
1/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. G
8B-7551 Bearing Puller Gp 1
1P-5546 Crossarm 1
3H-0465 Push-Puller Plate 2
5F-7366 Forcing Screw 1
H 1U-6692 Socket Wrench As 1
J 154-6183 Forcing Bolt 3
K 1U-6405 Three Jaw Puller 1
(1)
154-6360 Forcing Bolt is used for the latest ring gear.
Start By:
a. Remove the rear axle, differential, and final drive.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.
Illustration 1 g01351806
1. Use Tooling (A) and two suitable lifting devices to position rear axle, differential, and final
drive (1) onto suitable cribbing. The weight of rear axle, differential, and final drive (1) is
approximately 1588 kg (3500 lb).
2/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g01351767
2. Attach Tooling (B) and a suitable lifting device onto sprocket (2). The weight of sprocket
(2) is approximately 25 kg (55 lb).
3. Remove bolts (3), retainer (4), shims (5), and sprocket (2).
Note: Note the quantity and the order of shims (5).
Illustration 3 g01351809
4. Attach Tooling (B) and a suitable lifting device onto sprocket (6). The weight of sprocket
(6) is approximately 25 kg (55 lb).
5. Remove sprocket (6).
3/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 4 g01351900
6. Remove bearing cone (7).
Illustration 5 g01351906
7. Attach Tooling (A), Tooling (C), and two suitable lifting devices onto final drive housing
(8). The weight of final drive housing (8) is approximately 254 kg (560 lb). Remove nuts
(9).
Illustration 6 g01425110
4/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 7 g01352011
Note: Ensure that the drive shaft and carrier assembly stay in place as final drive housing is
removed. Failure to do so may result in the drive shaft and carrier assembly falling out as
the final drive housing is removed.
8. Remove bolts (9A). Use Tooling (D) to remove final drive housing (8).
Illustration 8 g02727681
9. Remove bolts (10).
Illustration 9 g02380996
5/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 10. Remove plug (10A).
Illustration 10 g02714387
11. Use Tooling (E) to remove retainer (11).
Illustration 11 g01352280
12. Remove shims (12). Use Tooling (A) and a suitable lifting device to remove housing (13).
The weight of housing (13) is approximately 90 kg (198 lb).
Note: Note the quantity and the order of shims (12).
6/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 12 g01352292
13. Remove thrust washer (14). Remove wear sleeves (15).
Illustration 13 g01352299
14. Turn over housing (13). Remove lip seal (16).
Illustration 14 g01352309
15. Remove bearing cup (17). Remove thrust washer (18).
Illustration 15 g01352320
7/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 16. Remove lip seal (19). Remove bearing cup (20).
Illustration 16 g01352324
17. Use Tooling (F) to remove carrier assembly (21) and drive shaft (22). The weight of carrier
assembly (21) and drive shaft (22) is approximately 125 kg (275 lb).
Illustration 17 g01352329
18. Use Tooling (G) to remove bearing cone (23).
Illustration 18 g01352339
19. Remove retaining ring (24) to remove axle shaft (22) from carrier assembly (21).
8/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 19 g01352406
20. Remove bolts (25) and retainer (26). Remove pin (27). Remove gear (28). Remove thrust
washers (29) and bearings (30). Repeat this step for the remaining planetary gears.
Illustration 20 g01352384
21. Remove axle shaft assembly (31).
9/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 21 g01352402
22. Remove retaining ring (32) to remove gear (33) from axle shaft (34).
Illustration 22 g02280615
23. Use Tooling (D) to separate ring gear (35) from the intermediate housing.
Note: If threads on Tooling (D) bottom out before ring gear (35) is removed, use washers as
needed to remove ring gear (35).
Illustration 23 g03681543
Note: Dimension for reaction plate.
a. Fabricate the reaction plate of Tooling (D) from 1/4 in. bar stock.
10/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 24 g01352445
24. Use Tooling (B) and a suitable lifting device to remove ring gear (35). The weight of ring
gear (35) is approximately 45 kg (100 lb).
25. Repeat Step 2 through Step 24 for the opposite side.
Illustration 25 g06039132
26. Position differential housing (36) with intermediate housing (37) upward.
Illustration 26 g06039255
11/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 27. Attach a suitable lifting device onto pinion (38). Use Tooling (J) to separate pinion (38)
from the center housing. Remove bolts (39) to remove pinion (38). The weight of pinion
(38) is approximately 68 kg (150 lb).
Illustration 27 g06039140
28. Remove shims (40). Remove O-ring seal (41).
Note: Note the order and the quantity of shims (40).
Illustration 28 g06039146
29. Remove bolt (42). Remove retainer (43). Remove yoke (44). Remove guard (45).
12/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 29 g06039150
30. Remove shims (46). Remove lip seal (47).
Note: Note the order and the quantity of shims (46).
Illustration 30 g06039157
Illustration 31 g06039258
31. Use a suitable press to remove pinion (48). Remove bearing cone (49). Remove bearing cup
(50). Remove bearing cone (51). Remove bearing cup (52).
Note: Damage to the housing can occur. Do not use the flange to support the housing when
removing the pinion.
13/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 32 g01352447
32. Remove bolts (53).
Illustration 33 g01352847
33. Use Tooling (H) to remove nut assembly (54).
Illustration 34 g01352870
34. Remove bolts (55). Remove bolts (56).
14/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 35 g01352873
35. Use Tooling (J) to separate intermediate housing (37) from differential housing (36).
Illustration 36 g01352886
36. Use Tooling (F) to remove intermediate housing (37). The weight of intermediate housing
(37) is approximately 54 kg (120 lb).
Illustration 37 g01352893
37. Remove shims (57).
15/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 38 g01352898
38. Use Tooling (A) to remove bearing assembly (58) and differential (59). The weight of
bearing assembly (58) and differential (59) is approximately 159 kg (350 lb).
Illustration 39 g01352982
39. Remove bolts (60). Remove shroud (61).
Illustration 40 g02760082
40. Use Tooling (G) to remove bearing assembly (62). Remove bearing cone (63).
16/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 41 g02760116
41. Use Tooling (K) to remove spacer (64) and bearing cone (65).
Note: This step is a destructive procedure.
Illustration 42 g02760138
42. Remove retaining ring (66). Remove bearing race (67). Remove O-ring seals (68). Remove
thrust ring (69).
Illustration 43 g02760140
17/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
43. Remove bolts (70). Remove case (71).
Illustration 44 g02760156
44. Remove thrust washer (72). Remove plates (73) and discs (74). Remove springs (75).
Note: Note the quantity and the order of plates (73) and discs (74).
Illustration 45 g02760160
45. Use two people to remove housing (76). The weight of housing (76) is approximately 23 kg
(50 lb).
18/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 46 g02760163
46. Use two people to remove differential gear (77). The weight of differential gear (77) is
approximately 14 kg (30 lb).
Illustration 47 g02760177
47. Use two people to remove spider assembly (78). The weight of spider assembly (78) is
approximately 14 kg (30 lb).
Illustration 48 g02760216
48. Remove thrust washer (79), pinion gear (80), and bearing sleeve (81) from spider (82).
Repeat this step for the remaining pinion gears (80).
19/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 49 g02760225
49. Remove differential gear (83). Remove thrust washer (84).
Illustration 50 g02761702
50. Turn over housing (85) and bevel gear (86). Remove bolts (87). Use two people to remove
housing (85) from bevel gear (86). The weight of housing (85) is approximately 35 kg
(77 lb). The weight of bevel gear (86) is approximately 24 kg (53 lb).
Illustration 51 g02761705
51. Remove bearing assembly (88). Remove piston (89).
20/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 52 g02761706
52. Remove thrust race (90), thrust bearing (91), and thrust race (92) from piston (89).
Illustration 53 g02761707
53. Remove seals (93) from piston (89).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Dec 13 14:59:46 UTC+0800 2020
21/21
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engi...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 14M3 MOTOR GRADER N9S
Configuration: 14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
14M3 Motor Grader Power Train
Media Number -M0067666-01 Publication Date -01/05/2017 Date Updated -16/05/2017
i06595550
Rear Axle, Differential and Final Drive - Assemble
SMCS - 3258-016; 3278-016; 3282-016-RE; 4050-016; 4068-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Bracket As 4
B 140-7742 Sleeve 2
C 1U-9200 Lever Puller Hoist 1
F 439-3939 Link Bracket As 2
H 1U-6692 Socket Wrench As 1
J 154-6183 Forcing Bolt 2
L - Loctite 243 Threadlocker -
M - Loctite 5127 High Flex Form-In-Place Gasket -
N 6V-2012 Depth Micrometer 1
P
8T-5096 Dial Indicator Gp 1
301-3405 Backlash Gauge 1
R 8T-4140 Bolt 4
S - 3% Molybdenum Grease -
1/27
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals, gaskets, and lip seals. Replace O-ring seals, gaskets, and lip seals
that are worn or damaged.
Note: Lubricate O-ring seals and lip seals with the lubricant that is being sealed.
Illustration 1 g02761707
1. Install seals (93) onto piston (89).
Illustration 2 g02843317
2. Install thrust bearing (91), onto piston (89).
2/27
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 3 g02761705
3. Install piston (89). Lower the temperature of bearing assembly (88). Install bearing
assembly (88).
Illustration 4 g02761702
4. Use two people to install housing (85) onto bevel gear (86). The weight of housing (85) is
approximately 35 kg (77 lb). The weight of bevel gear (86) is approximately 24 kg (53 lb).
Install bolts (87).
Tighten bolts (87) to a torque of 300 ± 40 N·m (221 ± 30 lb ft).
Illustration 5 g02760225
3/27
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. 5. Install thrust washer (84). Install differential gear (83).
Note: Install thrust washer (84) with the groove side against the gear.
Illustration 6 g02760216
6. Install bearing sleeve (81), pinion gear (80), and thrust washer (79) onto spider (82). Repeat
this step for the remaining pinion gears (80).
Illustration 7 g02760177
7. Use two people to install spider assembly (78). The weight of spider assembly (78) is
approximately 14 kg (30 lb).
4/27
14M Series 3 Motor Grader N9S00001-UP (MACHINE) POWERED BY C13 Engine(...
2020/12/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...