This document provides instructions for removing and installing the crankshaft front seal on a Caterpillar 3306B engine. It describes:
1. Removing the vibration damper, pulley, crankshaft seal adapter, O-ring seal, and wear sleeve.
2. Installing a new O-ring seal and crankshaft seal adapter. Installing the wear sleeve and crankshaft front seal using installing tools and adhesive.
3. The document is part of a service manual for a 140H Motor Grader and provides maintenance instructions for engine components.
Caterpillar cat 140 h motor grader (prefix 5hm) service repair manual (5hm000...fusefjskekkmem
This document provides instructions for removing and installing the crankshaft front seal on a Caterpillar 3306B engine. It describes:
1. Removing the vibration damper, pulley, crankshaft seal adapter, O-ring seal, and wear sleeve.
2. Installing a new O-ring seal and crankshaft seal adapter. Installing the wear sleeve and crankshaft front seal using installing tools and adhesive.
3. The document is part of a service manual for a 140H Motor Grader and provides maintenance instructions for engine components.
Caterpillar cat 930 r wheel loader (prefix 57z) service repair manual (57z030...fujskekfmsme
The document provides instructions for removing and installing the crankshaft front seal on a 930R wheel loader with a 3304 engine. It describes using various tools to remove the old seal and wear sleeve, cleaning the crankshaft, and pressing on a new seal and wear sleeve using an installer tool. The instructions note to keep parts clean and not use lubricants when installing the new seal components.
Caterpillar cat 930 r wheel loader (prefix 57z) service repair manual (57z000...fujskekfmsme
This document provides instructions for assembling a fuel injection pump housing and installing the fuel injection pump and governor on an engine. The key steps include:
1. Assembling the fuel injection pump housing by pressing bearings into place and installing other internal components.
2. Setting the engine's #1 piston to top center to align the fuel injection pump timing.
3. Installing the fuel injection pump housing, governor, and ensuring the timing pin engages the camshaft notch for proper timing.
Caterpillar cat 938 g wheel loader (prefix 4ys) service repair manual (4ys000...ufjjsjefkksemm
This document provides instructions for disassembling the transmission of a 938G wheel loader. It lists the required tools and begins by separating the transmission from the torque converter. It then provides step-by-step instructions to remove various transmission components such as shafts, gears, seals, and clutches. Precautions are included to prevent damage and contain fluids. Measurements are taken to check clutch pack clearances.
Caterpillar cat 303 ecr mini hydraulic excavator (prefix fr3) service repair ...ufjjsjefkksemm
The document provides instructions for removing and installing the fuel injection pump on a Caterpillar 303ECR Mini Hydraulic Excavator. The removal procedure involves removing the solenoid, speed control plate, start spring, and bolts to access the fuel injection pump. Shims under the pump must be removed and their thickness recorded. Installation requires placing new shims of the recorded thickness and aligning the control rack pin before bolting the pump back in place. Proper shim thickness is important for correct injection timing.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fisjejfskemmd
The document provides instructions for servicing a track-type tractor model D6H, including removing and installing track roller frames, idlers, and disassembling and assembling idlers. The multi-step process involves using various tools to separate parts, align components, install seals, and reassemble. Safety precautions are noted such as ensuring the tractor is level and stable before removing frames to prevent injury.
This document provides instructions for removing and installing a crankshaft rear seal on a 320D2 excavator. It describes removing the flywheel, using a Torx socket to remove screws from the crankshaft rear seal, and discarding the old seal. For installation, it details cleaning and preparing the crankshaft, installing a new seal with a plastic sleeve, aligning and tightening screws, and reinstalling the flywheel.
Jcb 527 58 t4 f telescopic handler service repair manual (sn from 2330671 and...ufjjsjefkksemm
This service manual provides instructions for servicing and maintaining a Loadall rough terrain variable reach truck. The manual contains sections covering the machine, attachments, body and framework, operator station, HVAC system, engine, fuel and exhaust systems, cooling system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The engine section provides detailed removal and installation instructions for components like the camshaft, tappets, rocker assembly, oil sump, and grid heater. Safety precautions are outlined throughout and torque specifications are provided for fasteners.
Caterpillar cat 140 h motor grader (prefix 5hm) service repair manual (5hm000...fusefjskekkmem
This document provides instructions for removing and installing the crankshaft front seal on a Caterpillar 3306B engine. It describes:
1. Removing the vibration damper, pulley, crankshaft seal adapter, O-ring seal, and wear sleeve.
2. Installing a new O-ring seal and crankshaft seal adapter. Installing the wear sleeve and crankshaft front seal using installing tools and adhesive.
3. The document is part of a service manual for a 140H Motor Grader and provides maintenance instructions for engine components.
Caterpillar cat 930 r wheel loader (prefix 57z) service repair manual (57z030...fujskekfmsme
The document provides instructions for removing and installing the crankshaft front seal on a 930R wheel loader with a 3304 engine. It describes using various tools to remove the old seal and wear sleeve, cleaning the crankshaft, and pressing on a new seal and wear sleeve using an installer tool. The instructions note to keep parts clean and not use lubricants when installing the new seal components.
Caterpillar cat 930 r wheel loader (prefix 57z) service repair manual (57z000...fujskekfmsme
This document provides instructions for assembling a fuel injection pump housing and installing the fuel injection pump and governor on an engine. The key steps include:
1. Assembling the fuel injection pump housing by pressing bearings into place and installing other internal components.
2. Setting the engine's #1 piston to top center to align the fuel injection pump timing.
3. Installing the fuel injection pump housing, governor, and ensuring the timing pin engages the camshaft notch for proper timing.
Caterpillar cat 938 g wheel loader (prefix 4ys) service repair manual (4ys000...ufjjsjefkksemm
This document provides instructions for disassembling the transmission of a 938G wheel loader. It lists the required tools and begins by separating the transmission from the torque converter. It then provides step-by-step instructions to remove various transmission components such as shafts, gears, seals, and clutches. Precautions are included to prevent damage and contain fluids. Measurements are taken to check clutch pack clearances.
Caterpillar cat 303 ecr mini hydraulic excavator (prefix fr3) service repair ...ufjjsjefkksemm
The document provides instructions for removing and installing the fuel injection pump on a Caterpillar 303ECR Mini Hydraulic Excavator. The removal procedure involves removing the solenoid, speed control plate, start spring, and bolts to access the fuel injection pump. Shims under the pump must be removed and their thickness recorded. Installation requires placing new shims of the recorded thickness and aligning the control rack pin before bolting the pump back in place. Proper shim thickness is important for correct injection timing.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fisjejfskemmd
The document provides instructions for servicing a track-type tractor model D6H, including removing and installing track roller frames, idlers, and disassembling and assembling idlers. The multi-step process involves using various tools to separate parts, align components, install seals, and reassemble. Safety precautions are noted such as ensuring the tractor is level and stable before removing frames to prevent injury.
This document provides instructions for removing and installing a crankshaft rear seal on a 320D2 excavator. It describes removing the flywheel, using a Torx socket to remove screws from the crankshaft rear seal, and discarding the old seal. For installation, it details cleaning and preparing the crankshaft, installing a new seal with a plastic sleeve, aligning and tightening screws, and reinstalling the flywheel.
Jcb 527 58 t4 f telescopic handler service repair manual (sn from 2330671 and...ufjjsjefkksemm
This service manual provides instructions for servicing and maintaining a Loadall rough terrain variable reach truck. The manual contains sections covering the machine, attachments, body and framework, operator station, HVAC system, engine, fuel and exhaust systems, cooling system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The engine section provides detailed removal and installation instructions for components like the camshaft, tappets, rocker assembly, oil sump, and grid heater. Safety precautions are outlined throughout and torque specifications are provided for fasteners.
Caterpillar cat 140 h motor grader (prefix 9tn) service repair manual (9tn000...fusjejfksemem
This document provides instructions for removing and installing a flywheel, vibration damper, and pulley on a 140H motor grader with a 3306 engine. It outlines the required tools and multi-step processes, which include using pullers and spacers to remove components and cleaning, inspecting, and applying compounds before tightening bolts to the specified torques. The document also describes removing and installing the flywheel housing, crankshaft rear seal, and related components.
Caterpillar cat 140 h motor grader (prefix 9zn) service repair manual (9zn000...ufjjsjefkksemm
This document provides instructions for installing connecting rod bearings and crankshaft main bearings on a 3306 engine. It describes cleaning and lubricating the bearings, inserting them into the connecting rods and crankcase, and checking clearances using tools like Plastigage. The bearings are installed in multiple steps to ensure proper alignment and torque specifications are followed.
Caterpillar cat 320 d l excavator (prefix kgf) service repair manual (kgf0000...fkjsekksmem
This document provides instructions for disassembling and assembling the travel motor of a 320D L excavator. The disassembly process includes 27 steps to remove components like the head, fittings, seals, brake piston, plates, and barrel assembly. The assembly section outlines 13 steps including installing seals, keys, cam plate, springs, and piston shoe assemblies back into the barrel assembly and body of the travel motor. Special care must be taken to align parts properly and not allow components to separate during disassembly and assembly.
Caterpillar cat 938 g wheel loader (prefix 6ws) service repair manual (6ws000...fisjejfskemmd
This document provides assembly instructions for a Flexxaire fan on a 938G wheel loader. It describes how to assemble the shifter block, hub, actuator bearings/control shaft, install an O-ring on the main shaft, and install main bearing cups. The instructions include illustrations and notes about lubrication, torque specifications, and verifying clearances at various steps.
Jcb 325 t skid steer loader service repair manual sn from 2476302 to 2477300fujsjefjskekmem
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures. Precautions are given such as allowing the engine to cool before working on it and using lifting devices due to the heavy weight of components.
Jcb ps760 transmission service repair manualufjjsjefkksemm
This service manual section provides information on servicing and repairing components of the JCB PS760, PS764, PS766 semi-automatic gearbox. The document covers general information, as well as procedures for clutches, solenoid valves, oil pumps, shafts, cases, and other components. Torque specifications and part numbers are included for repairs.
This document provides instructions for removing and installing various engine components on a Caterpillar 330 L excavator, including:
1. The cylinder head removal procedure involves removing fuel injection lines, exhaust manifold, rocker shaft and pushrods, and bolts holding the head to the cylinder block.
2. Installing the cylinder head requires cleaning surfaces, installing gaskets and bolts, adjusting valves, and reinstalling other removed components.
3. Removal of the spacer plate requires removing seals and installing a new gasket, while installation requires cleaning and installing the plate with new seals.
Mc cormick mtx series (2002 2007) - mtx3 - mtx140 service repair manualfujsjejfskekmm
This document contains parts lists and diagrams for engine components of McCormick MTX Series tractors from 2002-2007, including the MTX110, MTX125 and MTX140 models. It lists part numbers, descriptions and diagrams of systems such as the engine, transmission, radiator, air intake, exhaust and cooling. Replacement parts are indicated along with torque specifications and other installation details.
Mc cormick mtx series (2002 2007) - mtx3 - mtx125 service repair manualfujsjejfskekmm
This document contains parts lists and diagrams for engine components of McCormick MTX Series tractors from 2002-2007, including the MTX110, MTX125 and MTX140 models. It lists part numbers, descriptions and diagrams of systems such as the engine, transmission, radiator, air intake, exhaust and cooling. Replacement parts are indicated along with torque specifications and other installation details.
Mc cormick fxl tier 3 (2008 2009) - rp53 - f90 gexl tractor service repair ma...fujsjejfskekmm
This document contains parts information for an engine, including:
- Component numbers, descriptions and quantities for various engine parts like cylinders, blocks, heads, gears, pumps, etc.
- Reference numbers linking components to assemblies.
- Notes on replacements, kits, and other part details.
- Identification of the engine model and tier specifications.
Mc cormick fxl tier 3 (2008 2009) - rp53 - f80 gexl tractor service repair ma...fujsjejfskekmm
This document contains parts listings and technical specifications for components of an engine. It includes identification numbers, serial numbers, replacement part numbers, kit numbers, and other technical details for various engine parts like cylinders, pistons, gears, shafts, plates, gaskets and more. The parts are categorized and organized with reference numbers to show assemblies and components.
Mc cormick fxl tier 3 (2008 2009) - rp53 - f75 ge tractor service repair manualfujsjejfskekmm
This document contains parts information for an engine, including components like the cylinder block, crankshaft, cylinder head, camshaft, and fuel pump. It lists the part numbers, descriptions, and quantities of over 140 individual part items that make up the engine assembly. References are made to applicable engine models and serial number ranges for some of the parts.
Mc cormick fxl tier 3 (2008 2009) - rp53 - f65 ge tractor service repair manualfujsjejfskekmm
This document contains parts listings and technical specifications for components of an engine. It includes over 140 individual part listings for items like cylinders, pistons, gears, pumps, plates and other engine parts. Each part listing includes the part number, description, reference number and other technical details. It appears to be an exploded diagram or service manual for maintaining and repairing a diesel engine.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 90 gexl tractor service r...fujsjejfskekmm
This document contains parts listings and information for components of an engine. It lists part numbers, descriptions, quantities and other technical specifications for items such as a cylinder block, crankshaft, piston, cylinder head, camshaft and fuel pump. References are made to assemblies and replacement part designations.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 65 ge tractor service rep...fujsjejfskekmm
This document contains parts listings and descriptions for components of an engine. It includes listings for various engine parts like cylinders, pistons, pumps, heads, and other components. Each part includes references numbers, quantities needed, and other identifying information. It appears to be providing an exploded parts diagram and listing for servicing or ordering replacement parts for a specific engine model.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f95 fgexl tractor service r...fujsjejfskekmm
This document contains parts listings and component information for engine repairs and replacements. It includes engine serial numbers or part numbers, replacement part numbers, and notes on replacements, overhauls, and kits for engines in McCormick tractors from 2003-2008. The parts listed are for cylinder heads, crankshafts, pistons, connecting rods, gears, and other engine components.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f60 fge tractor service rep...fujsjejfskekmm
This document contains parts lists and component information for various engine and fuel system components from an McCormick tractor. It includes lists of parts needed for the engine head, cylinder, crankshaft, fuel injection pump, and fuel injectors. Each part is identified by number and name, and specifies the quantity needed. Additional information provided includes repair specifications and component diagrams.
Mc cormick f top restyling (2010 ) - rp55 - f120gexl tractor service repair ...fujsjejfskekmm
This document contains parts listings and component details for various engine assemblies. It includes listings for engines, pumps, sensors, housings and other components, with details like part numbers, references, quantities and application information. Components are identified for specific engine models like the Perkins NM51637 and NM70975 engines.
Caterpillar cat 140 h motor grader (prefix 9tn) service repair manual (9tn000...fusjejfksemem
This document provides instructions for removing and installing a flywheel, vibration damper, and pulley on a 140H motor grader with a 3306 engine. It outlines the required tools and multi-step processes, which include using pullers and spacers to remove components and cleaning, inspecting, and applying compounds before tightening bolts to the specified torques. The document also describes removing and installing the flywheel housing, crankshaft rear seal, and related components.
Caterpillar cat 140 h motor grader (prefix 9zn) service repair manual (9zn000...ufjjsjefkksemm
This document provides instructions for installing connecting rod bearings and crankshaft main bearings on a 3306 engine. It describes cleaning and lubricating the bearings, inserting them into the connecting rods and crankcase, and checking clearances using tools like Plastigage. The bearings are installed in multiple steps to ensure proper alignment and torque specifications are followed.
Caterpillar cat 320 d l excavator (prefix kgf) service repair manual (kgf0000...fkjsekksmem
This document provides instructions for disassembling and assembling the travel motor of a 320D L excavator. The disassembly process includes 27 steps to remove components like the head, fittings, seals, brake piston, plates, and barrel assembly. The assembly section outlines 13 steps including installing seals, keys, cam plate, springs, and piston shoe assemblies back into the barrel assembly and body of the travel motor. Special care must be taken to align parts properly and not allow components to separate during disassembly and assembly.
Caterpillar cat 938 g wheel loader (prefix 6ws) service repair manual (6ws000...fisjejfskemmd
This document provides assembly instructions for a Flexxaire fan on a 938G wheel loader. It describes how to assemble the shifter block, hub, actuator bearings/control shaft, install an O-ring on the main shaft, and install main bearing cups. The instructions include illustrations and notes about lubrication, torque specifications, and verifying clearances at various steps.
Jcb 325 t skid steer loader service repair manual sn from 2476302 to 2477300fujsjefjskekmem
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures. Precautions are given such as allowing the engine to cool before working on it and using lifting devices due to the heavy weight of components.
Jcb ps760 transmission service repair manualufjjsjefkksemm
This service manual section provides information on servicing and repairing components of the JCB PS760, PS764, PS766 semi-automatic gearbox. The document covers general information, as well as procedures for clutches, solenoid valves, oil pumps, shafts, cases, and other components. Torque specifications and part numbers are included for repairs.
This document provides instructions for removing and installing various engine components on a Caterpillar 330 L excavator, including:
1. The cylinder head removal procedure involves removing fuel injection lines, exhaust manifold, rocker shaft and pushrods, and bolts holding the head to the cylinder block.
2. Installing the cylinder head requires cleaning surfaces, installing gaskets and bolts, adjusting valves, and reinstalling other removed components.
3. Removal of the spacer plate requires removing seals and installing a new gasket, while installation requires cleaning and installing the plate with new seals.
Mc cormick mtx series (2002 2007) - mtx3 - mtx140 service repair manualfujsjejfskekmm
This document contains parts lists and diagrams for engine components of McCormick MTX Series tractors from 2002-2007, including the MTX110, MTX125 and MTX140 models. It lists part numbers, descriptions and diagrams of systems such as the engine, transmission, radiator, air intake, exhaust and cooling. Replacement parts are indicated along with torque specifications and other installation details.
Mc cormick mtx series (2002 2007) - mtx3 - mtx125 service repair manualfujsjejfskekmm
This document contains parts lists and diagrams for engine components of McCormick MTX Series tractors from 2002-2007, including the MTX110, MTX125 and MTX140 models. It lists part numbers, descriptions and diagrams of systems such as the engine, transmission, radiator, air intake, exhaust and cooling. Replacement parts are indicated along with torque specifications and other installation details.
Mc cormick fxl tier 3 (2008 2009) - rp53 - f90 gexl tractor service repair ma...fujsjejfskekmm
This document contains parts information for an engine, including:
- Component numbers, descriptions and quantities for various engine parts like cylinders, blocks, heads, gears, pumps, etc.
- Reference numbers linking components to assemblies.
- Notes on replacements, kits, and other part details.
- Identification of the engine model and tier specifications.
Mc cormick fxl tier 3 (2008 2009) - rp53 - f80 gexl tractor service repair ma...fujsjejfskekmm
This document contains parts listings and technical specifications for components of an engine. It includes identification numbers, serial numbers, replacement part numbers, kit numbers, and other technical details for various engine parts like cylinders, pistons, gears, shafts, plates, gaskets and more. The parts are categorized and organized with reference numbers to show assemblies and components.
Mc cormick fxl tier 3 (2008 2009) - rp53 - f75 ge tractor service repair manualfujsjejfskekmm
This document contains parts information for an engine, including components like the cylinder block, crankshaft, cylinder head, camshaft, and fuel pump. It lists the part numbers, descriptions, and quantities of over 140 individual part items that make up the engine assembly. References are made to applicable engine models and serial number ranges for some of the parts.
Mc cormick fxl tier 3 (2008 2009) - rp53 - f65 ge tractor service repair manualfujsjejfskekmm
This document contains parts listings and technical specifications for components of an engine. It includes over 140 individual part listings for items like cylinders, pistons, gears, pumps, plates and other engine parts. Each part listing includes the part number, description, reference number and other technical details. It appears to be an exploded diagram or service manual for maintaining and repairing a diesel engine.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 90 gexl tractor service r...fujsjejfskekmm
This document contains parts listings and information for components of an engine. It lists part numbers, descriptions, quantities and other technical specifications for items such as a cylinder block, crankshaft, piston, cylinder head, camshaft and fuel pump. References are made to assemblies and replacement part designations.
Mc cormick fxl techno tier 3 (2008 2009) - rp54 - f 65 ge tractor service rep...fujsjejfskekmm
This document contains parts listings and descriptions for components of an engine. It includes listings for various engine parts like cylinders, pistons, pumps, heads, and other components. Each part includes references numbers, quantities needed, and other identifying information. It appears to be providing an exploded parts diagram and listing for servicing or ordering replacement parts for a specific engine model.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f95 fgexl tractor service r...fujsjejfskekmm
This document contains parts listings and component information for engine repairs and replacements. It includes engine serial numbers or part numbers, replacement part numbers, and notes on replacements, overhauls, and kits for engines in McCormick tractors from 2003-2008. The parts listed are for cylinder heads, crankshafts, pistons, connecting rods, gears, and other engine components.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f60 fge tractor service rep...fujsjejfskekmm
This document contains parts lists and component information for various engine and fuel system components from an McCormick tractor. It includes lists of parts needed for the engine head, cylinder, crankshaft, fuel injection pump, and fuel injectors. Each part is identified by number and name, and specifies the quantity needed. Additional information provided includes repair specifications and component diagrams.
Mc cormick f top restyling (2010 ) - rp55 - f120gexl tractor service repair ...fujsjejfskekmm
This document contains parts listings and component details for various engine assemblies. It includes listings for engines, pumps, sensors, housings and other components, with details like part numbers, references, quantities and application information. Components are identified for specific engine models like the Perkins NM51637 and NM70975 engines.
Mc cormick f top restyling (2010 ) - rp55 - f110gexl tractor service repair ...fujsjejfskekmm
This document provides parts information for various engine components. It includes the part numbers, descriptions, and other technical specifications for items like pistons, gears, shafts, sensors, housings and more. Replacement parts are identified along with the serial or engine numbers they apply to. Notes also provide information on component assemblies and orderability.
Mc cormick f top restyling (2010 ) - rp55 - f85ge tractor service repair manualfujsjejfskekmm
This document provides parts information for components of an engine assembly. It includes images and part numbers for individual parts like pistons, rods, bearings, gaskets and other engine internals. Specifications are provided for each part, along with quantity and replacement part ordering information. The document also indicates when parts are part of a larger assembly and should not be replaced individually.
Mc cormick f top restyling (2010 ) - rp55 - f80 ge xl tractor service repa...fujsjejfskekmm
This document provides component part information for an engine or tractor. It includes part numbers, serial numbers, descriptions and other technical specifications for various engine, pump and transmission components. Quantities, replacement parts and other details are also listed for each component. The document appears to be a catalog or manual for ordering replacement parts.
Mc cormick f top restyling (2010 ) - rp55 - f70ge tractor service repair manualfujsjejfskekmm
This document contains parts listings and component information for an engine assembly. It includes listings for various engine parts like cylinders, pistons, gears, housings, pumps, sensors and more. Each component lists the part number, quantity needed, reference numbers, and notes like whether it is a replacement part. Symbols are used to indicate components in an assembly that should not be serviced individually.
Mc cormick f e line restyling (2010- ) - rp56 - f85ge tractor service repair ...fujsjejfskekmm
This document provides component part listings and information for an engine assembly. It lists individual engine parts, references numbers, quantities and other identifying information. It indicates that some components are not serviced individually and must be replaced as part of larger assemblies. Component applications and replacement part designations are also provided.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140H MOTOR GRADER 5HM
Configuration: 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00990465
Crankshaft Front Seal - Remove
SMCS - 1160-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
B 5P-7315 Wear Sleeve Distorter Ring 1
C 5P-7312 Seal Distorter 1
Start By:
A. Remove the vibration damper and the pulley. Refer to Disassembly and Assembly,
"Vibration Damper and Pulley - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
1/3140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
Note: When a crankshaft seal is replaced, the wear sleeve must also be replaced.
Illustration 1 g00504503
1. Remove the two bolts, washers, spacers and clamp (1) that holds crankshaft seal adapter (2)
in position. Remove crankshaft seal adapter (2) and the O-ring seal from the engine.
2. Use Tool (A) and a press to remove the crankshaft seal from crankshaft seal adapter (2) .
3. Install the O-ring seal and crankshaft seal adapter (2) on the engine. Install the two bolts,
washers, spacers and clamp (1) to hold crankshaft seal adapter (2) in position.
2/3140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g00510634
4. Install Tool (B) in the bore of seal adapter (2), as shown.
NOTICE
Care should be taken to ensure that the seal distorter does not cut
through the wear sleeve. Damage to the crankshaft surface may occur
leading to possible oil seal leaks.
5. Install Tool (C) between Tool (B) and the wear sleeve. Turn Tool (C) with a wrench, until
the edge of the tool makes a flat crease in the wear sleeve. Repeat this process until there are
enough creases in the wear sleeve in order to allow the wear sleeve to be slipped off the end
of the crankshaft.
6. Remove Tools (B) and (C). Remove the wear sleeve by hand.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 18 13:36:58 UTC+0800 2020
3/3140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140H MOTOR GRADER 5HM
Configuration: 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i06015907
Crankshaft Front Seal - Install
SMCS - 1160-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
4C-8982 (1)
Installer 1
438-9547 (2)
Installer 1
7F-8022 Bolt 1
( 1 )
Use to install 9Y-9895 seal
( 2 )
Use to install 362-8853 seal
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 1 g00488110
Note: Once the seal and the wear sleeve are separated, these components cannot be used
again. Refer to Special Instruction, SMHS8508 before the seal is serviced.
Note: Do not use any type of lubricant during the installation of the crankshaft seal and
wear sleeve.
Note: Before installing the wear sleeve, inspect the crankshaft for scratches or any
distortion on the surface of the crankshaft that may lead to an out of round condition. Use a
polishing cloth to clean the imperfections on the crankshaft.
1. Install crankshaft front seal (1) and wear sleeve (2) with Tool (A) , as follows:
a. Use 4C-9500 Quick Cure Primer to clean the outside diameter of crankshaft (3) and
the inside diameter of wear sleeve (2) .
b. Apply 4C-9507 Compound to the outside diameter of crankshaft (3) and the inside
diameter of wear sleeve (2) .
c. Place crankshaft front seal (1) and wear sleeve (2) on the front of crankshaft (3) .
Install Tool (A) and tighten until the inside surface of the Installer comes in contact
with the end of the crankshaft.
End By: Install the vibration damper and the pulley. Refer to Disassembly and Assembly,
"Vibration Damper and Pulley - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 18 13:37:54 UTC+0800 2020
2/2140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140H MOTOR GRADER 5HM
Configuration: 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i02107004
Gear Group (Front) - Remove
SMCS - 1206-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Start By:
A. Remove the automatic timing advance unit. Refer to Disassembly and Assembly,
"Automatic Timing Advance - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 1 g00476414
1. Remove bolts (1), plate (2), and fuel pump idler gear (3) .
Illustration 2 g00476416
2. Remove the bearing from fuel pump idler gear (3) with Tooling (A) .
Illustration 3 g00476417
3. Remove bolts (4), plate (5), and camshaft gear (6) .
2/3140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 4 g00476418
4. Remove the bolts that hold shield (7) in position between the fuel pump and the exhaust
manifold. Slide the shield backward from the timing cover plate.
5. Remove nuts (8) .
Illustration 5 g00476419
6. Remove bolts (10). Remove timing gear plate (9) and the gasket.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 18 13:38:50 UTC+0800 2020
3/3140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140H MOTOR GRADER 5HM
Configuration: 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i02107019
Gear Group (Front) - Install
SMCS - 1206-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
B 9S-3263 Thread Lock Compound 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the gaskets and the O-ring seals. If the gaskets or the O-ring
seals are worn or damaged, use new parts for replacement.
1. Clean the old gasket from the contact surfaces of the timing gear plate and the cylinder
block. Install a new gasket on the cylinder block. Cut the gasket even with the bottom face
of the cylinder block.
1/4140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 1 g00476419
NOTICE
The bolts that hold the timing gear plate in position on the cylinder
block should have a reduced bolt head thickness. The reduced bolt
head thickness is needed for clearance for the gears.
2. Ensure that the O-ring seals are in position on the end of the fuel injection pump housing.
Put timing gear plate (9) in position on the cylinder block. Install bolts (10) .
Illustration 2 g00476418
3. Install shield (7). Install nuts (8) .
Note: After the timing gear plate is installed, ensure that the rack is free to move in the fuel
injection pump housing. The O-ring seal on the drive end of the fuel injection pump housing
can hold the rack. This can help prevent free rack movement. Rack movement can be seen
through a hole in the timing gear plate just above the mounting of the fuel pump gear. If the
rack does not move freely, remove the timing gear plate and check the O-ring seal on the
drive end of the fuel injection pump housing.
2/4140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. If the rack does not move freely, the engine can over speed and be
damaged. Serious personal injury may result.
Illustration 3 g01072912
Note: If idler gear shaft (11) for the fuel pump idler gear was removed, use Tooling (B) on
the threads of bolts (12) and nut (13) before reinstalling idler gear shaft (11). Tighten bolts
(12) and nut (13) to a torque of 50 ± 10 N·m (37 ± 7 lb ft).
4. Put camshaft gear (6) and plate (5) in position on the engine. Align the Mark "C" on the
camshaft gear with the Mark "C" on the crankshaft gear. Install bolts (4) and tighten bolts
(4) to a torque of 55 ± 7 N·m (41 ± 5 lb ft).
Illustration 4 g00476416
5. Use Tooling (A) in order to install the bearing in fuel pump idler gear (3). The end of the
bearing must be 3.00 ± 0.25 mm (.118 ± .010 inch) below the face of the hub of the fuel
pump idler gear.
3/4140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 5 g00476414
6. Ensure that the oil hole in the shaft for fuel pump idler gear (3) is open. Install fuel pump
idler gear (3). Put plate (2) in position with the finished side facing toward fuel pump idler
gear (3). Apply Tooling (B) on bolts (1). Install bolts (1) that hold fuel pump idler gear (3)
in position.
Note: Remove excess Tooling (B) on plate (2). Excess Tooling (B) on plate (2) may flow
into the gear bearings. This condition can affect lubrication. Bearing life can also be
affected.
End By: Install the automatic timing advance unit. Refer to Disassembly and Assembly,
"Automatic Timing Advance - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 18 13:39:45 UTC+0800 2020
4/4140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140H MOTOR GRADER 5HM
Configuration: 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i02107163
Housing (Front) - Remove
SMCS - 1151-011
Removal Procedure
Start By:
A. Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
B. Remove the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front
Seal - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/2140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 1. Remove the bolts that hold the oil pan and the oil pan plate to the front housing. Loosen the
remaining bolts that hold the oil pan in position. Put spacers between the cylinder block and
the oil pan plate. This must be done in order to prevent damage to the gasket for the oil pan
plate.
Note: If the gasket for the oil pan plate is damaged, the oil pan plate must be removed.
Refer to Disassembly and Assembly, "Engine Oil Pan Plate - Remove and Install".
Illustration 1 g00512114
2. Remove covers (1) and (2) from the back of the front plate.
Illustration 2 g00512122
3. Remove all bolts (3) that hold front housing (4) in position on the engine. Remove front
housing (4) and the gasket from the engine.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 18 13:40:41 UTC+0800 2020
2/2140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140H MOTOR GRADER 5HM
Configuration: 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i02107191
Housing (Front) - Install
SMCS - 1151-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 3S-6252 Sealant 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 1 g00512213
1. Put the gasket and front housing (4) in position on the engine. Install all bolts (3) that hold
the front housing to the engine. Tighten bolts (5) to a torque of 23 ± 4 N·m (17 ± 3 lb ft).
Illustration 2 g00512114
2. Put the gasket and cover (1) in position and install the bolts that fasten cover (1) to the front
plate. Put the O-ring seal and cover (2) in position and install the bolts that fasten cover (2)
to the front plate.
3. Trim the front housing gasket so the gasket is even with the bottom of the cylinder block.
Note: If the oil pan plate was removed, install a new gasket and install the oil pan plate.
Refer to Disassembly and Assembly, "Engine Oil Pan Plate - Remove and Install".
4. Apply Tooling (A) to the bottom surface of the front housing gasket. Remove the spacers
that were installed between the cylinder block and the oil pan plate. Install the bolts that
hold the oil pan and the oil pan plate to the front housing. Tighten the remaining bolts that
hold the oil pan in position.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 18 13:41:37 UTC+0800 2020
2/2140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140H MOTOR GRADER 5HM
Configuration: 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i04880697
Valve Mechanism Cover - Remove and Install
SMCS - 1107-010
3304B Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00590318
1. Loosen hose clamp (5) and remove the hose from breather cap (3) .
2. Remove bolt (1) and remove breather cap (3) .
1/5140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 3. Remove bolts (4) and the washers that hold valve mechanism cover (2) in position. Remove
valve mechanism cover (2) and the gasket.
3306B Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00513507
1. Remove bolt (1) and breather cap (3) from valve mechanism cover (2) . Remove the O-ring
seal from breather cap (3) .
2. Remove bolts (4) and the washers that hold valve mechanism cover (2) in position. Remove
valve mechanism cover (2) and the gasket.
3304B Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/5140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. Illustration 3 g00590318
Illustration 4 g00590290
Illustration 5 g00590318
3/5140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Note: Check the condition of the gasket. If the gasket is worn or damaged, use new parts for
replacement.
1. Install a new gasket for valve mechanism cover (2) . Apply 5H-2471 Adhesive on the
surfaces of the gasket and valve mechanism cover (2) . Place valve mechanism cover (2) in
position on the cylinder head.
2. Install bolts (4) that hold valve mechanism cover (2) . Tighten the bolts in a numerical
sequence to a torque of 16 ± 3 N·m (12 ± 2 lb ft).
3. Install the hose on breather cap (3) and tighten hose clamp (5) .
3306B Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the gasket and O-ring seals. If the gasket or the O-ring seals
are worn or damaged, use new parts for replacement.
Illustration 6 g00513507
1. Install a new gasket for valve mechanism cover (2) . Put valve mechanism cover (2) in
position on the cylinder head.
4/5140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 7 g00450791
2. Install the washers and bolts (4) that hold valve mechanism cover (2) in position. Tighten
the bolts in a numerical sequence to a torque of 16 ± 3 N·m (12 ± 2 lb ft). Use the numerical
sequence that is shown in illustration 7.
3. Put the O-ring seal and breather cap (3) in position. Install the washer and bolt (1) . Tighten
bolt (1) to a torque of 14 ± 3 N·m (10 ± 2 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 18 13:42:33 UTC+0800 2020
5/5140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEB...
2020/2/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...