This document provides instructions for removing and installing an engine oil pan on a Caterpillar 3306 engine. It begins by draining the engine oil and removing the overflow tube and oil level gauge guide. It then instructs to remove the bolts and washers holding the oil pan in place and remove the pan and gasket. Reinstallation involves cleaning the components, installing a new gasket, and securing the pan with bolts and washers. Proper disposal of drained fluids is emphasized.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fusefjskekkmem
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat d6 h track type tractor (prefix 8kb) service repair manual (8...fujsjefjkskemm
This document provides instructions for removing and installing the camshaft on a Caterpillar D6H track-type tractor. The procedure involves removing components like the valve lifters and timing gear cover. Marks are made on gears to ensure proper timing is maintained. The camshaft is then removed and lubricated before being reinstalled along with checking timing marks to ensure correct installation.
Caterpillar cat 330 b l excavator (prefix 1js) service repair manual (1js0000...fjskefkemms
This document provides instructions for removing and installing various engine components on a 330B L EXCAVATOR, including:
- Exhaust manifold removal and installation requiring removal of the turbocharger and fuel lines.
- Inlet and exhaust valve removal and installation using specialized tools to compress springs.
- Removal and installation of valve guides, seats, and inserts using driver tools to precisely install components.
- Removal of the engine oil filter base requiring a strap wrench to remove the oil filter.
This document provides instructions for removing and installing engine balancer shaft bearings on 3304B and 3306B engines for Caterpillar built machines:
1. The removal procedure includes using a special tool to pull the six balancer shaft bearings out toward the flywheel end of the engine after removing components like the oil pan and balancer shaft.
2. The installation procedure specifies using the same special tool to install the bearings at precise depths in the cylinder block and checking the bore size after installation.
3. Reinstalling components like the flywheel housing, balancer shaft, and oil pan completes the process.
Caterpillar cat 936 e wheel loader (prefix 33z) service repair manual (33z030...ufjkskemfseol
This document provides instructions for removing and installing the flywheel housing on a Caterpillar 936E wheel loader with a 3304 engine. It describes:
1) Removing the flywheel, crankshaft rear seal, oil pan plate bolts, and flywheel housing bolts to remove the housing.
2) Cleaning parts and installing the housing with bolts, checking gaskets, and reinstalling components like the oil pan plate.
3) The process involves several specific steps and the use of tools to safely and properly remove and replace the flywheel housing.
Caterpillar cat 330 a l excavator (prefix 9 ml) service repair manual (9ml000...fjskefkemms
The document provides instructions for installing and removing a turbocharger on a Caterpillar 330 excavator engine:
1) To remove the turbocharger, loosen clamps and bolts holding the oil supply/drain tubes and housing. Remove the turbocharger and check seals.
2) To install the turbocharger, position it on the exhaust manifold with new gaskets. Attach the oil tubes and housing with bolts and clamps.
3) The instructions also cover removing and installing the exhaust manifold, which involves removing nuts and studs, checking gaskets, and attaching the manifold.
The document describes Pulnikov EC's new IE5+ series of asynchronous motors that achieve the IE5 efficiency class. It provides an overview of the development of the IE5+ series, including the design strategies used to reach IE5 efficiency while maintaining normal starting torque, acceptable motor mass, and conventional manufacturing techniques. Motor data is presented for 2-pole, 4-pole, 6-pole, and 8-pole IE5+ motor designs ranging from 0.09 kW to 355 kW, including efficiency levels, power factors, torque characteristics, and materials usage. The economic benefits of replacing conventional IE3 motors with IE5+ motors are also discussed.
Caterpillar cat 950 b wheel loader (prefix 63r) service repair manual (63r000...fjsjjekdkme
This document provides instructions for removing and installing various components of a Caterpillar 3304B engine, including the cylinder head, spacer plate, and water directors. The removal and installation procedures describe disconnecting related components, removing mounting bolts, cleaning surfaces, installing new gaskets and seals, and torquing fasteners to the specified values. Safety notices are included to keep parts clean and contain fluids.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fusefjskekkmem
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat d6 h track type tractor (prefix 8kb) service repair manual (8...fujsjefjkskemm
This document provides instructions for removing and installing the camshaft on a Caterpillar D6H track-type tractor. The procedure involves removing components like the valve lifters and timing gear cover. Marks are made on gears to ensure proper timing is maintained. The camshaft is then removed and lubricated before being reinstalled along with checking timing marks to ensure correct installation.
Caterpillar cat 330 b l excavator (prefix 1js) service repair manual (1js0000...fjskefkemms
This document provides instructions for removing and installing various engine components on a 330B L EXCAVATOR, including:
- Exhaust manifold removal and installation requiring removal of the turbocharger and fuel lines.
- Inlet and exhaust valve removal and installation using specialized tools to compress springs.
- Removal and installation of valve guides, seats, and inserts using driver tools to precisely install components.
- Removal of the engine oil filter base requiring a strap wrench to remove the oil filter.
This document provides instructions for removing and installing engine balancer shaft bearings on 3304B and 3306B engines for Caterpillar built machines:
1. The removal procedure includes using a special tool to pull the six balancer shaft bearings out toward the flywheel end of the engine after removing components like the oil pan and balancer shaft.
2. The installation procedure specifies using the same special tool to install the bearings at precise depths in the cylinder block and checking the bore size after installation.
3. Reinstalling components like the flywheel housing, balancer shaft, and oil pan completes the process.
Caterpillar cat 936 e wheel loader (prefix 33z) service repair manual (33z030...ufjkskemfseol
This document provides instructions for removing and installing the flywheel housing on a Caterpillar 936E wheel loader with a 3304 engine. It describes:
1) Removing the flywheel, crankshaft rear seal, oil pan plate bolts, and flywheel housing bolts to remove the housing.
2) Cleaning parts and installing the housing with bolts, checking gaskets, and reinstalling components like the oil pan plate.
3) The process involves several specific steps and the use of tools to safely and properly remove and replace the flywheel housing.
Caterpillar cat 330 a l excavator (prefix 9 ml) service repair manual (9ml000...fjskefkemms
The document provides instructions for installing and removing a turbocharger on a Caterpillar 330 excavator engine:
1) To remove the turbocharger, loosen clamps and bolts holding the oil supply/drain tubes and housing. Remove the turbocharger and check seals.
2) To install the turbocharger, position it on the exhaust manifold with new gaskets. Attach the oil tubes and housing with bolts and clamps.
3) The instructions also cover removing and installing the exhaust manifold, which involves removing nuts and studs, checking gaskets, and attaching the manifold.
The document describes Pulnikov EC's new IE5+ series of asynchronous motors that achieve the IE5 efficiency class. It provides an overview of the development of the IE5+ series, including the design strategies used to reach IE5 efficiency while maintaining normal starting torque, acceptable motor mass, and conventional manufacturing techniques. Motor data is presented for 2-pole, 4-pole, 6-pole, and 8-pole IE5+ motor designs ranging from 0.09 kW to 355 kW, including efficiency levels, power factors, torque characteristics, and materials usage. The economic benefits of replacing conventional IE3 motors with IE5+ motors are also discussed.
Caterpillar cat 950 b wheel loader (prefix 63r) service repair manual (63r000...fjsjjekdkme
This document provides instructions for removing and installing various components of a Caterpillar 3304B engine, including the cylinder head, spacer plate, and water directors. The removal and installation procedures describe disconnecting related components, removing mounting bolts, cleaning surfaces, installing new gaskets and seals, and torquing fasteners to the specified values. Safety notices are included to keep parts clean and contain fluids.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fujjskeksmem
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fujsjexswfksekmfm
This document provides instructions for removing and installing an engine oil pan on a 140G motor grader with a 3306 engine. It describes draining the engine oil, loosening nuts and tubes connected to the oil pan, and removing bolts and washers. When removing the oil pan, the instructions note to catch any fluids in suitable containers for proper disposal. Reinstallation involves replacing gaskets and bolts and tightening connections.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fjjskekdmmme
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fujsefkskekmm
This document provides instructions for removing and installing an engine oil pan on a 140G motor grader with a 3306 engine. It describes draining the engine oil, loosening nuts and tubes connected to the oil pan, and removing bolts and washers. When removing the oil pan, the instructions note to catch any fluids in suitable containers for proper disposal. Reinstallation involves replacing gaskets and bolts and tightening connections.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fujsjejfskekmm
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fjkskekxsdcmdmme
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fjjskekertsmemm
This document provides instructions for removing and installing an engine oil pan on a 140G motor grader with a 3306 engine. It describes draining the engine oil, loosening nuts and tubes connected to the oil pan, and removing bolts and washers. When removing the oil pan, the instructions note to catch any fluids in suitable containers for proper disposal. Reinstallation involves replacing gaskets and bolts and tightening connections.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...ufjjsejklemd
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...udjjfkkskemm
This document provides instructions for removing and installing the camshaft and camshaft bearings on a Caterpillar 3306 engine. It outlines the necessary steps including removing timing gears, camshaft drive gear, and camshaft. It emphasizes keeping parts clean and provides illustrations of the component locations. Installation involves aligning timing marks, lubricating parts, and reinstalling components in reverse order.
Caterpillar Cat 140G MOTOR GRADER (Prefix 72V) Service Repair Manual (72V0423...fujskkmdmdm
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes:
1) Removing the valve lifters, timing gear cover, and bolts/lock to remove the camshaft.
2) Installing the camshaft drive gear, lubricating the lobes, and ensuring proper timing by aligning marks.
3) Tightening bolts and installing remaining parts.
The document provides instructions for removing and installing a camshaft on a D7G2 track-type tractor with a 3306 engine. It describes removing the valve lifters, timing gear cover, camshaft bolts and camshaft. When installing, it specifies applying lubricant to the lobes and oil to the bearings, aligning timing marks, and torquing bolts to the correct specification. Proper removal and installation of other components like the lifters and timing cover are also noted.
This document provides instructions for removing and installing an engine oil pan on a D7G2 track-type tractor with a 3306 engine. It describes draining the oil, loosening retaining nuts, removing bolts and washers, and removing the pan and gasket. Reinstallation involves cleaning parts, positioning the gasket and pan, and torquing the bolts and nuts to specifications.
The document provides instructions for removing and installing a camshaft on a D7G2 track-type tractor with a 3306 engine. The procedure involves removing components like the valve lifters and timing gear cover before removing the camshaft bolts and camshaft. Special marks are made on gears to ensure proper timing is maintained. The camshaft is then reinstalled along with any removed components.
Caterpillar cat d6 h track type tractor (prefix 8kb) service repair manual (8...jfksekksmem
This document provides instructions for removing and installing the camshaft on a Caterpillar D6H track-type tractor with a 3306 engine. It describes removing the valve lifters, timing gear cover, and bolts holding the camshaft gear. Marks should be made on gears to ensure proper timing is maintained. The camshaft is then carefully removed and lubricated before installation in reverse order while aligning timing marks. Removal and installation of camshaft bearings is also outlined.
Caterpillar cat d6 h track type tractor (prefix 8kb) service repair manual (8...fjskemedcdmme
This document provides instructions for removing and installing the camshaft on a Caterpillar D6H track-type tractor with a 3306 engine. It describes removing the valve lifters, timing gear cover, and bolts holding the camshaft gear. Marks should be made on gears to ensure proper timing on reinstallation. The camshaft is then carefully removed and lubricated before reinstallation and adjustment of timing marks. Removal and installation of the camshaft bearings is also described.
Mc cormick c l europa tier 2 (2007-2008) - rs50 - 70 tractor service repair m...fdusjejkskem
This document contains a list of engine components for a McCormick tractor. It includes over 140 individual parts with descriptions, part numbers, quantities needed, and other technical specifications. The parts are for the engine, fuel system, valves, pistons, bearings, gears, and other internal components. The document provides replacement and overhaul instructions for the different tractor models and engine types.
Mc cormick bmax tier 3 (2011 ) - rt64 - 100 tractor service repair manualfdusjejkskem
This document contains parts information for engines and components. It lists part numbers, descriptions, and indicates whether parts are for replacement or reference purposes. Serial or engine numbers are referenced for some parts to indicate applicability. Kit designations and tolerance specifications are also provided for some items.
Mc cormick bmax tier 3 (2011 ) - rt64 - 90 tractor service repair manualfdusjejkskem
This document provides parts information for an engine, including:
- Part numbers, serial numbers, replacement kits, and other identifying information for various engine components
- Quantity and other specification information for replacements
- Notes on components that are part of assemblies and not individually serviced
The parts cover multiple engine models and ranges of serial numbers.
Mc cormick bmax tier 3 (2011 ) - rt64 - 80 tractor service repair manualfdusjejkskem
This document contains parts listings and component information for an engine. It includes over 125 individual part listings with information like part numbers, serial numbers, replacement parts, and component types. The parts are for items like the cylinder block, pistons, valves, pumps, sensors and other engine components.
Mc cormick bmax (2007 ) - rt62 - 100 tractor service repair manualfdusjejkskem
This document provides part numbers and component information for engine repairs. It includes listings of parts, part numbers, kits, and specifications needed to repair items like cylinders, pistons, pumps, housings, and other engine components. Quantities of parts and application ranges based on tractor serial numbers are also provided. The document appears to be from an engine repair manual or parts catalog.
Mc cormick 9 7 series (2014- ) - rs37 - 7070 - 7080 arm tractor service repai...fdusjejkskem
This document contains parts listings and diagrams for components of McCormick RS37 model 7070 and 7080 engines. It lists part numbers, names, and other identifying information for items like blocks, heads, crankcases, manifolds, and other internal engine parts. Notes provide information on applications, specifications like lengths and diameters, and whether parts are replacement options. The parts are depicted visually in diagrams to show their place in the engine assembly.
Mc cormick (2011 ) - rs43 - 6450 ism-vrm tractor service repair manualfdusjejkskem
This document provides part numbers and descriptions for components that make up various tractor assemblies. It includes information like part names and numbers, quantities needed, and application details. Replacement part designations and quantities per tractor are also provided for some items. Images are referenced for additional information.
More Related Content
Similar to Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v00823 04230)
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fujjskeksmem
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fujsjexswfksekmfm
This document provides instructions for removing and installing an engine oil pan on a 140G motor grader with a 3306 engine. It describes draining the engine oil, loosening nuts and tubes connected to the oil pan, and removing bolts and washers. When removing the oil pan, the instructions note to catch any fluids in suitable containers for proper disposal. Reinstallation involves replacing gaskets and bolts and tightening connections.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fjjskekdmmme
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fujsefkskekmm
This document provides instructions for removing and installing an engine oil pan on a 140G motor grader with a 3306 engine. It describes draining the engine oil, loosening nuts and tubes connected to the oil pan, and removing bolts and washers. When removing the oil pan, the instructions note to catch any fluids in suitable containers for proper disposal. Reinstallation involves replacing gaskets and bolts and tightening connections.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fujsjejfskekmm
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fjkskekxsdcmdmme
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fjjskekertsmemm
This document provides instructions for removing and installing an engine oil pan on a 140G motor grader with a 3306 engine. It describes draining the engine oil, loosening nuts and tubes connected to the oil pan, and removing bolts and washers. When removing the oil pan, the instructions note to catch any fluids in suitable containers for proper disposal. Reinstallation involves replacing gaskets and bolts and tightening connections.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...ufjjsejklemd
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...udjjfkkskemm
This document provides instructions for removing and installing the camshaft and camshaft bearings on a Caterpillar 3306 engine. It outlines the necessary steps including removing timing gears, camshaft drive gear, and camshaft. It emphasizes keeping parts clean and provides illustrations of the component locations. Installation involves aligning timing marks, lubricating parts, and reinstalling components in reverse order.
Caterpillar Cat 140G MOTOR GRADER (Prefix 72V) Service Repair Manual (72V0423...fujskkmdmdm
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes:
1) Removing the valve lifters, timing gear cover, and bolts/lock to remove the camshaft.
2) Installing the camshaft drive gear, lubricating the lobes, and ensuring proper timing by aligning marks.
3) Tightening bolts and installing remaining parts.
The document provides instructions for removing and installing a camshaft on a D7G2 track-type tractor with a 3306 engine. It describes removing the valve lifters, timing gear cover, camshaft bolts and camshaft. When installing, it specifies applying lubricant to the lobes and oil to the bearings, aligning timing marks, and torquing bolts to the correct specification. Proper removal and installation of other components like the lifters and timing cover are also noted.
This document provides instructions for removing and installing an engine oil pan on a D7G2 track-type tractor with a 3306 engine. It describes draining the oil, loosening retaining nuts, removing bolts and washers, and removing the pan and gasket. Reinstallation involves cleaning parts, positioning the gasket and pan, and torquing the bolts and nuts to specifications.
The document provides instructions for removing and installing a camshaft on a D7G2 track-type tractor with a 3306 engine. The procedure involves removing components like the valve lifters and timing gear cover before removing the camshaft bolts and camshaft. Special marks are made on gears to ensure proper timing is maintained. The camshaft is then reinstalled along with any removed components.
Caterpillar cat d6 h track type tractor (prefix 8kb) service repair manual (8...jfksekksmem
This document provides instructions for removing and installing the camshaft on a Caterpillar D6H track-type tractor with a 3306 engine. It describes removing the valve lifters, timing gear cover, and bolts holding the camshaft gear. Marks should be made on gears to ensure proper timing is maintained. The camshaft is then carefully removed and lubricated before installation in reverse order while aligning timing marks. Removal and installation of camshaft bearings is also outlined.
Caterpillar cat d6 h track type tractor (prefix 8kb) service repair manual (8...fjskemedcdmme
This document provides instructions for removing and installing the camshaft on a Caterpillar D6H track-type tractor with a 3306 engine. It describes removing the valve lifters, timing gear cover, and bolts holding the camshaft gear. Marks should be made on gears to ensure proper timing on reinstallation. The camshaft is then carefully removed and lubricated before reinstallation and adjustment of timing marks. Removal and installation of the camshaft bearings is also described.
Similar to Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v00823 04230) (15)
Mc cormick c l europa tier 2 (2007-2008) - rs50 - 70 tractor service repair m...fdusjejkskem
This document contains a list of engine components for a McCormick tractor. It includes over 140 individual parts with descriptions, part numbers, quantities needed, and other technical specifications. The parts are for the engine, fuel system, valves, pistons, bearings, gears, and other internal components. The document provides replacement and overhaul instructions for the different tractor models and engine types.
Mc cormick bmax tier 3 (2011 ) - rt64 - 100 tractor service repair manualfdusjejkskem
This document contains parts information for engines and components. It lists part numbers, descriptions, and indicates whether parts are for replacement or reference purposes. Serial or engine numbers are referenced for some parts to indicate applicability. Kit designations and tolerance specifications are also provided for some items.
Mc cormick bmax tier 3 (2011 ) - rt64 - 90 tractor service repair manualfdusjejkskem
This document provides parts information for an engine, including:
- Part numbers, serial numbers, replacement kits, and other identifying information for various engine components
- Quantity and other specification information for replacements
- Notes on components that are part of assemblies and not individually serviced
The parts cover multiple engine models and ranges of serial numbers.
Mc cormick bmax tier 3 (2011 ) - rt64 - 80 tractor service repair manualfdusjejkskem
This document contains parts listings and component information for an engine. It includes over 125 individual part listings with information like part numbers, serial numbers, replacement parts, and component types. The parts are for items like the cylinder block, pistons, valves, pumps, sensors and other engine components.
Mc cormick bmax (2007 ) - rt62 - 100 tractor service repair manualfdusjejkskem
This document provides part numbers and component information for engine repairs. It includes listings of parts, part numbers, kits, and specifications needed to repair items like cylinders, pistons, pumps, housings, and other engine components. Quantities of parts and application ranges based on tractor serial numbers are also provided. The document appears to be from an engine repair manual or parts catalog.
Mc cormick 9 7 series (2014- ) - rs37 - 7070 - 7080 arm tractor service repai...fdusjejkskem
This document contains parts listings and diagrams for components of McCormick RS37 model 7070 and 7080 engines. It lists part numbers, names, and other identifying information for items like blocks, heads, crankcases, manifolds, and other internal engine parts. Notes provide information on applications, specifications like lengths and diameters, and whether parts are replacement options. The parts are depicted visually in diagrams to show their place in the engine assembly.
Mc cormick (2011 ) - rs43 - 6450 ism-vrm tractor service repair manualfdusjejkskem
This document provides part numbers and descriptions for components that make up various tractor assemblies. It includes information like part names and numbers, quantities needed, and application details. Replacement part designations and quantities per tractor are also provided for some items. Images are referenced for additional information.
Komatsu wa250 6 wheel loader service repair manual sn75001 and upfdusjejkskem
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, hydraulics systems, and other components are included.
- Standard values, testing and adjustment procedures, and troubleshooting information is provided.
- Failure codes, fuse locations, and other diagnostic information is listed to assist with repairs.
Komatsu d31 pl 20 dozer bulldozer service repair manualfdusjejkskem
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the removal and installation procedures for components like the starting motor and alternator. Safety precautions are outlined, emphasizing the importance of following proper service procedures, wearing protective equipment, and taking safety measures like blocking equipment before starting work. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu d31 p 20a dozer bulldozer service repair manualfdusjejkskem
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the disassembly and assembly procedures for components like the starting motor and alternator. Safety precautions are outlined, emphasizing the importance of following proper service procedures, wearing protective equipment, and taking safety measures like blocking equipment before starting work. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other sections.
Komatsu d31 p 20 dozer bulldozer service repair manualfdusjejkskem
- The document is a shop manual that provides instructions for maintenance and repair of Komatsu bulldozers.
- It contains safety notices and general precautions for working on equipment. Proper personal protective equipment and safety procedures are emphasized.
- The document is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics.
- Specific instructions are provided for removal and installation of components like the starting motor and alternator. Torque specifications and other details are given.
Komatsu d31 e 20 dozer bulldozer service repair manualfdusjejkskem
This document provides instructions for servicing components of Komatsu bulldozers, including removal and installation of the starting motor, alternator, and engine oil cooler core. Key steps include disconnecting battery cables and electrical connections, loosening mounting hardware, and reinstalling components in reverse order while following tightening specifications and adjusting components as needed. Safety precautions are provided to prevent injury when working on pressurized systems and around moving parts.
Komatsu d21 a,p 8 dozer bulldozer service repair manual (sn 83001 and up)fdusjejkskem
This shop manual provides instructions for servicing a Komatsu D21A, P-8 bulldozer with a serial number of 83001 or higher. The manual contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics. This section specifically describes how to remove the fuel injection pump assembly. It outlines 14 steps to disconnect hoses, remove mounting nuts, and take note of alignment marks to ensure proper reinstallation of the fuel injection pump and related components. Precautions are provided to prevent dropping parts and maintaining proper alignment of gears.
Komatsu 12 v170 1 diesel engine service repair manualfdusjejkskem
This shop manual provides instructions for servicing a Komatsu 12v17 diesel engine. It contains sections on the engine's structure and function, testing and adjusting procedures, disassembly and assembly instructions, maintenance standards, and repair/replacement of parts. Technicians are advised to follow the safety precautions outlined and contact their distributor for the latest revision of the manual.
John deere 500 trail buck utility atv service repair manual (tm2160)fdusjejkskem
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. Procedures for front drive shaft removal and installation are also described.
John deere 500 buck utility atv service repair manual (tm2153)fdusjejkskem
The document is a technical manual section about front drive repair for a John Deere utility ATV. It includes instructions for removing and installing the front drive shaft, including inspecting the drive shaft boots. It also provides procedures for removing and installing the front differential, including how to measure and adjust the differential backlash. Images and diagrams accompany the text to illustrate the procedures. Safety information is included at the beginning to warn technicians to support the vehicle properly when working underneath.
John deere 315 d side shift loader service repair technical manual (tm1497)fdusjejkskem
- The document provides repair information for the reverser, reverse brake, forward clutch, and planetary assembly of 300D, 310D, and 315D backhoe loaders.
- It describes how to remove and disassemble the front cover and reverse brake, including inspecting parts for wear.
- Procedures are provided for removing and disassembling the input shaft and forward clutch, and removing the planetary assembly and bearing retainer.
- Detailed step-by-step instructions are given for assembling the input shaft and forward clutch.
John deere 314 f walk behind tillers service repair manual (tm1687)fdusjejkskem
This technical manual provides instructions for servicing John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, components, schematics, troubleshooting, repairs, and safety information. The manual is intended for experienced technicians and organized with headings to guide readers to relevant information for completing jobs. It also provides contact information for feedback to improve future manuals.
John deere 310 d backhoe loaders service repair technical manual (tm1497)fdusjejkskem
- The document provides repair information for the reverser, reverse brake, forward clutch, and planetary assembly of 300D, 310D, and 315D backhoe loaders.
- It describes removing and disassembling the front cover and reverse brake, removing and disassembling the input shaft and forward clutch, and removing the planetary assembly and bearing retainer.
- Step-by-step instructions are given for assembling the input shaft and forward clutch.
John deere 35 g (sn. from k270001) compact excavator service repair technical...fdusjejkskem
The document provides instructions for removing and installing a sprocket, front idler, track adjuster, and recoil spring on an excavator. It describes removing components like the track and cap screws holding parts in place. Precautions are outlined and specifications provided for torque values and part weights. Detailed steps cover disassembling, inspecting, lubricating, and reassembling parts like the front idler and track adjuster using specialized tools.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140G MOTOR GRADER 72V
Configuration: 140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01037991
Camshaft - Remove and Install
SMCS - 1210-010
Removal Procedure
Start By:
A. Remove the valve lifters. Refer to Disassembly and Assembly, "Lifter Group - Remove and
Install".
B. Remove the timing gear cover. Refer to Disassembly and Assembly, "Front Housing -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00476744
1. Turn the crankshaft to top center compression stroke for the No. 1 piston. The "C" mark on
the crankshaft gear will be aligned with the "C" mark on the camshaft gear.
Illustration 2 g00476743
Note: Put a mark on the teeth of the fuel injection pump drive gear and the idler gear at
location (A). This will help to keep the engine timing correct during the removal and the
installation of the camshaft. Put a mark on the teeth of the idler gear and camshaft gear (2)
at location (B). When the camshaft is installed, the engine timing will be correct when the
mark at location (A) is aligned with the mark at location (B) and the "C" mark on the
crankshaft gear is aligned with the "C" mark on the camshaft gear.
2. Remove the bolts, the lock and washer (1) .
Illustration 3 g00535590
2/5140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. NOTICE
Do not damage the lobes or the bearings when the camshaft is
removed.
3. Carefully remove camshaft (3) from the engine.
4. If necessary, remove the bolts that hold camshaft drive gear (2) to the camshaft and remove
the gear.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 4 g00535590
1. Put camshaft drive gear (2) in position on the end of camshaft (3). Install the bolts that hold
camshaft drive gear (2) to camshaft (3). Tighten the bolts to a torque of 55 ± 7 N·m (41 ± 5
lb ft).
NOTICE
Do not damage the lobes or the bearings when the camshaft is installed.
3/5140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 2. Put 8T-2998 Camshaft Lubricant on the camshaft lobes only and put clean engine oil on the
bearing journals.
Note: During the installation of camshaft (3), rotate the camshaft in both directions in order
to prevent binding in the camshaft bearing bores.
3. Carefully install camshaft (3) into the engine.
Illustration 5 g00476743
Illustration 6 g00476744
4. Make sure that the mark on the teeth of the fuel injection pump drive gear and the idler gear
are in alignment at location (A). Make sure that the mark on the teeth of the idler gear and
camshaft gear (2) are in alignment at location (B). Align the "C" marks on the crankshaft
gear and camshaft gear (2). When all of the timing marks are in alignment the engine timing
is correct.
4/5140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 5. Install washer (1), the lock and the two bolts that hold the camshaft in position in the
engine.
End By:
a. Install the valve lifters. Refer to Disassembly and Assembly, "Lifter Group - Remove and
Install".
b. Install the timing gear cover. Refer to Disassembly and Assembly, "Front Housing - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 25 00:47:13 UTC+0800 2020
5/5140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140G MOTOR GRADER 72V
Configuration: 140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i02473351
Camshaft Bearings - Remove and Install
SMCS - 1211-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-2241 Camshaft Bearing Tool Group 1
8H-0684 Ratchet Wrench 1
Start By:
A. Remove the Flywheel Housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
B. Remove the Oil Pan Plate. Refer to Disassembly and Assembly, "Oil Pan Plate - Remove
and Install".
C. Remove the Camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and
Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 1 g00478567
1. Use Tool (A) to remove the camshaft bearing from the cylinder block. Start with the front
bearings and work to the rear bearing.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A
8S-2241 Camshaft Bearing Tool Group 1
8H-0684 Ratchet Wrench 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/4140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 2 g00478567
1. Use Tool (A) to install the camshaft bearings in the 3304B and 3306B cylinder block.
Note: The camshaft bearings in the 3304B have pressure lubrication. The intermediate
camshaft bearings and the rear camshaft bearings in the 3306B have splash lubrication.
2. Install the camshaft bearings in the 3304B cylinder block, as follows:
(a) Install the front bearing to a depth of 0.57 ± 0.5 mm (0.022 ± 0.02 inch). Ensure that the
oil holes are in a horizontal position and that the camshaft bearing joint is at the top of the
engine. The camshaft bearing joint can not be more than 15° degrees from vertical in either
direction.
(b) Install the center bearing to a depth of 303.2 ± 0.5 mm (11.94 ± 0.02 inch). Ensure that
the oil holes in the camshaft bearing are in alignment with the oil holes in the cylinder
block.
(c) Install the rear bearing to a depth of 604.9 ± 0.5 mm (23.81 ± 0.02 inch). Ensure that the
oil holes in the camshaft bearing are in alignment with the oil holes in the cylinder block.
Illustration 3 g00478822
1. Install the camshaft bearings in the 3306B cylinder block, as follows:
2. Install front bearing (B) to a depth of 0.5 ± 0.5 mm (.02 ± .02 inch). Ensure that the oil holes
are in a horizontal position and that the camshaft bearing joint is at the top of the engine.
The camshaft bearing joint cannot be more than 15 degrees from the vertical position in
either direction.
3. Install the remainder of the bearings. Install the bearings to the dimensions that are given
from the front face of the cylinder block: (C) 154.0 ± 0.5 mm (6.06 ± .02 inch), (D) 303.2 ±
3/4140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 0.5 mm (11.94 ± .02 inch), (E) 601.7 ± 0.5 mm (23.69 ± .02 inch) and (F) 903.4 ± 0.5 mm
(35.57 ± .02 inch).
End By:
a. Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
b. Install the oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate -
Remove and Install".
c. Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 25 00:48:08 UTC+0800 2020
4/4140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140G MOTOR GRADER 72V
Configuration: 140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00974130
Engine Oil Pan - Remove and Install
SMCS - 1302-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1. Drain the engine oil from the engine into a suitable container for storage or disposal.
1/3140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 1 g00541041
2. Loosen nut (4) and move the overflow tube away from the oil level gauge guide. Loosen nut
(3) and remove the oil level gauge guide from the engine.
3. Remove bolts (1) and the washers that hold the engine oil pan in position. Remove engine
oil pan (2) and the gasket from the engine oil pan plate.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00541041
1. Put the gasket and engine oil pan (2) in position on the engine oil pan plate. Install bolts (1)
and the washers that hold the engine oil pan in position.
2/3140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 2. Install the oil level gauge guide and tighten nut (3). Fasten the overflow tube to the oil level
gauge guide and tighten nut (4) .
3. Fill the crankcase with engine oil to the proper level. Refer to Operation and Maintenance
Manual, "Refill Capacities".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 25 00:49:04 UTC+0800 2020
3/3140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140G MOTOR GRADER 72V
Configuration: 140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01111802
Engine Balancer Shaft - Remove and Install
SMCS - 1220-010-JF
Removal Procedure
Start By:
A. Remove the front housing cover. Refer to Disassembly and Assembly, "Front Housing
Cover - Remove".
B. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
1/3140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Dispose of all fluids according to local regulations and mandates.
Note: The oil pan plate has been removed for photo purposes only.
Illustration 1 g00590442
1. Remove plates (2) that hold the balancer shaft in the cylinder block.
2. Remove balancer shafts (1) from the cylinder block.
Installation Procedure
Illustration 2 g00590449
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 1. Install the balancer shafts in each side of the cylinder block.
2. Install plates (2) and the bolts that hold the balancer shafts in position in the cylinder block.
Note: Ensure that the balancer shafts are in time before the oil pump is installed.
End By:
a. Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Install".
b. Install the front housing cover. Refer to Disassembly and Assembly, "Front Housing Cover
- Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 25 00:50:00 UTC+0800 2020
3/3140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140G MOTOR GRADER 72V
Configuration: 140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01135419
Engine Balancer Shaft Bearings - Remove and Install
SMCS - 1220-010-BD
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-2241 Camshaft Bearing Tool Group 1
8H-0684 Ratchet Wrench 1
Start By:
A. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan -
Remove".
B. Remove the balancer shaft. Refer toDisassembly and Assembly, "Balancer Shaft -
Remove".
C. Remove the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing
Remove" .
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
1/4140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00602186
Use Tool (A) to remove the six balancer shaft bearing. Pull the balancer shaft bearings toward the
flywheel end of the engine.
Installation Procedure
Illustration 2 g00602186
2/4140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. Illustration 3 g00602205
(A) The front bearing depth is 0.8 ± 0.5 mm (0.03 ± 0.02 inch).
(B) The center bearing depth is 290.6 ± 0.5 mm (11.44 ± 0.02 inch).
(C) The rear bearing depth is 601.0 ± 0.5 mm (23.66 ± 0.02 inch).
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
3/4140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 1. Install the balancer shaft front bearing with Tool (A). Ensure that the holes in the bearings
are aligned with the holes in the cylinder block. The bearing must be 0.8 ± 0.5 mm (0.03 ±
0.02 inch) inside the front face of the cylinder block after installation.
2. Install the balancer shaft center bearing with Tool (A). Ensure that the holes in the bearings
are aligned with the holes in the cylinder block. The bearing must be 290.6 ± 0.5 mm (11.44
± 0.02 inch) inside the front face of the cylinder block after installation.
3. Install the balancer shaft rear bearing with Tool (A). Ensure that the holes in the bearings
are aligned with the holes in the cylinder block. The bearing must be 601.0 ± 0.5 mm (23.66
± 0.02 inch) inside the front face of the cylinder block after installation.
4. Check the bore of the bearings. The balancer shaft bearing bore must be 53.05 ± 0.06 mm
(2.089 ± 0.002 inch) after installation.
End By:
a. Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Install" .
b. Install the balancer shaft. Refer to Disassembly and Assembly, "Balancer Shaft - Remove
and Install".
c. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 25 00:50:55 UTC+0800 2020
4/4140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140G MOTOR GRADER 72V
Configuration: 140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00912474
Cylinder Liner - Remove
SMCS - 1216-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8T-0812 Cylinder Liner Puller 1
1U-6317 Bridge 1
1U-6319 Socket 1
Start By:
A. Remove the spacer plate. Refer to Disassembly and Assembly, "Spacer Plate - Remove and
Install".
B. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 1 g00474523
1. Turn the crankshaft until two of the pistons are at the bottom center. Remove two
connecting rod cap bolts (2) from each rod. Remove connecting rod caps (4) .
2. Tap connecting rod (3) away from the crankshaft with a soft hammer. Remove bearing half
(1) .
Illustration 2 g00474623
3. Use tool (A) to remove cylinder liners (5) .
4. Remove the pistons and connecting rods from the cylinder liners.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 25 00:51:51 UTC+0800 2020
2/2140G MOTOR GRADER 72V00823-04230 (MACHINE) POWERED BY 3306 ENG...
2020/2/25https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...