This document provides disassembly instructions for a 12M 3 AWD motor grader transmission. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing housing components, sensors, seals, plates, discs, pistons, gears, and bearings. Detailed illustrations are provided to show the location and orientation of each part removed to aid in proper reassembly. Safety notices are included to warn of potential spring hazards and ensure contained fluid removal.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual Instant...f8usejkdmmd8i
This document provides the disassembly procedure for a transmission in a 12M 3 motor grader. It lists over 35 steps to completely disassemble the transmission along with required tools. Cautions are provided regarding contained fluids, identification marks, and spring forces. Detailed illustrations accompany each step showing the parts being removed.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual (N9R000...tingrm81805
1) The document provides disassembly instructions for a 12M 3 motor grader transmission.
2) It lists over 50 individual parts that must be removed, and provides illustrations and detailed steps for removing each part.
3) Special tools are required to remove many components, and springs apply force that can cause injury, so protective equipment is advised.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual Instant...ze6074xunong
This document provides the disassembly procedure for a transmission in a 12M 3 motor grader. It lists over 35 steps and required tools to fully disassemble the transmission. Key components that are disassembled include the housing, clutch assembly, gear assembly, seals, sensors and electrical components. Detailed illustrations accompany each step to show how to remove parts in the correct order while noting part orientations for reassembly. Safety notices are included to properly handle springs and contain fluids.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual (N9R000...hdjsjndndnd
1) The document provides disassembly instructions for a 12M 3 motor grader transmission.
2) It lists over 45 steps and required tools to disassemble the transmission and its components.
3) The disassembly process involves removing housing, plates, seals, sensors, gears, and other internal components. Precautions are provided to handle springs and heavy parts safely during disassembly.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual Instant...f8seodkdmdmed3
1) The document provides disassembly instructions for a 12M 3 motor grader transmission.
2) It lists over 45 steps and required tools to disassemble the transmission and its components.
3) The disassembly process involves removing housing, plates, seals, sensors, gears, and other internal components. Precautions are provided to handle springs and heavy parts safely during disassembly.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual Instant...hean57759707
1) The document provides disassembly instructions for a 12M 3 motor grader transmission.
2) It lists over 45 steps and required tools to disassemble the transmission and its components.
3) Safety notices are included throughout to warn of heavy parts that require lifting devices and springs that can cause injury if not properly released.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix F9B) Service Repair Manual (F9B000...hdjsjndndnd
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 30 steps to fully disassemble the transmission along with required tools. These steps include removing components like the yoke assembly, retaining rings, seals, plates, sensors, clutches, gears, and housing. Detailed illustrations are provided to show how to position the transmission and which components to remove at each step. Safety notices are also included regarding containing fluids, wearing protective equipment, and handling compressed springs.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix F9B) Service Repair Manual Instant...ze6074xunong
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 30 steps to completely disassemble the transmission along with required tools. These steps include removing components like the yoke assembly, retaining rings, seals, plates, sensors, clutches, gears, and housing. Detailed illustrations are provided to show how to position and support the transmission during disassembly. Safety notices are also included regarding containing fluids, wearing protective equipment, and handling compressed springs.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual Instant...f8usejkdmmd8i
This document provides the disassembly procedure for a transmission in a 12M 3 motor grader. It lists over 35 steps to completely disassemble the transmission along with required tools. Cautions are provided regarding contained fluids, identification marks, and spring forces. Detailed illustrations accompany each step showing the parts being removed.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual (N9R000...tingrm81805
1) The document provides disassembly instructions for a 12M 3 motor grader transmission.
2) It lists over 50 individual parts that must be removed, and provides illustrations and detailed steps for removing each part.
3) Special tools are required to remove many components, and springs apply force that can cause injury, so protective equipment is advised.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual Instant...ze6074xunong
This document provides the disassembly procedure for a transmission in a 12M 3 motor grader. It lists over 35 steps and required tools to fully disassemble the transmission. Key components that are disassembled include the housing, clutch assembly, gear assembly, seals, sensors and electrical components. Detailed illustrations accompany each step to show how to remove parts in the correct order while noting part orientations for reassembly. Safety notices are included to properly handle springs and contain fluids.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual (N9R000...hdjsjndndnd
1) The document provides disassembly instructions for a 12M 3 motor grader transmission.
2) It lists over 45 steps and required tools to disassemble the transmission and its components.
3) The disassembly process involves removing housing, plates, seals, sensors, gears, and other internal components. Precautions are provided to handle springs and heavy parts safely during disassembly.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual Instant...f8seodkdmdmed3
1) The document provides disassembly instructions for a 12M 3 motor grader transmission.
2) It lists over 45 steps and required tools to disassemble the transmission and its components.
3) The disassembly process involves removing housing, plates, seals, sensors, gears, and other internal components. Precautions are provided to handle springs and heavy parts safely during disassembly.
Caterpillar Cat 12M 3 MOTOR GRADER (Prefix N9R) Service Repair Manual Instant...hean57759707
1) The document provides disassembly instructions for a 12M 3 motor grader transmission.
2) It lists over 45 steps and required tools to disassemble the transmission and its components.
3) Safety notices are included throughout to warn of heavy parts that require lifting devices and springs that can cause injury if not properly released.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix F9B) Service Repair Manual (F9B000...hdjsjndndnd
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 30 steps to fully disassemble the transmission along with required tools. These steps include removing components like the yoke assembly, retaining rings, seals, plates, sensors, clutches, gears, and housing. Detailed illustrations are provided to show how to position the transmission and which components to remove at each step. Safety notices are also included regarding containing fluids, wearing protective equipment, and handling compressed springs.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix F9B) Service Repair Manual Instant...ze6074xunong
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 30 steps to completely disassemble the transmission along with required tools. These steps include removing components like the yoke assembly, retaining rings, seals, plates, sensors, clutches, gears, and housing. Detailed illustrations are provided to show how to position and support the transmission during disassembly. Safety notices are also included regarding containing fluids, wearing protective equipment, and handling compressed springs.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix F9B) Service Repair Manual Instant...f8seodkdmdmed3
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 30 steps to completely disassemble the transmission along with required tools. These steps include removing components like the yoke assembly, retaining rings, seals, plates, sensors, clutches, gears, and housing. Detailed illustrations are provided to show how to position and support the transmission during disassembly. Safety notices are also included regarding containing fluids, wearing protective equipment, and handling compressed springs.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix F9B) Service Repair Manual Instant...f8usejkdmmd8i
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 30 steps to completely disassemble the transmission along with required tools. These steps include removing components like the yoke assembly, retaining rings, seals, plates, sensors, clutches, gears, and housing. Detailed illustrations are provided to show how to position and support the transmission during disassembly. Safety notices are also included regarding containing fluids, wearing protective equipment, and handling compressed springs.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix F9B) Service Repair Manual Instant...hean57759707
This document provides the disassembly procedure for a 12M 2 motor grader transmission. It lists over 50 steps to disassemble the transmission along with required tools. Key components that are disassembled include the housing, clutch assemblies, gear assemblies, seals, sensors, pistons and various discs, plates, rings and washers. Detailed illustrations accompany each step to show how to remove the individual parts in the proper sequence. Safety notices are included regarding releasing spring forces and containing fluids.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual Instant...ze6074xunong
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 35 individual steps to remove components like clutches, seals, sensors, gears and housings. Detailed illustrations accompany each step to show how to position the transmission and what fasteners and tools to use. Safety notices are included to handle components and release spring forces properly.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual Instant...f8usejkdmmd8i
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 35 individual steps to remove components like clutches, seals, sensors, housings and more. Detailed illustrations accompany each step and special safety notices are included. Required tools are listed as well as part numbers.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual (R9P000...tingrm81805
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 35 individual steps to disassemble various components of the transmission, including removing housing components, seals, sensors, clutches, and gears. Detailed illustrations accompany each step to show how to position the transmission and which fasteners and tools to use. Safety notices are included regarding containing fluids, wearing protective equipment, and noting part orientations for reassembly.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual (R9P000...hdjsjndndnd
1) The document provides disassembly instructions for a 12M 2 motor grader transmission. It lists over 50 individual steps and required tools to fully disassemble the transmission.
2) Key components that must be removed include the transmission housing, clutch assemblies, gears, seals, bearings, pistons, and various discs, plates, rings, and washers. Detailed illustrations are provided to identify each part.
3) Safety notices are included, warning of heavy component weights and potential for parts to be propelled by released spring forces during disassembly. Orientations of parts must be noted for proper reassembly.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual Instant...hean57759707
1) The document provides disassembly instructions for a 12M 2 motor grader transmission. It lists over 50 individual steps and required tools to fully disassemble the transmission.
2) Key components that must be removed include the transmission housing, clutch assemblies, gears, seals, bearings, pistons, and various discs, plates, rings, and washers. The order and orientation of components is noted for reassembly.
3) Safety precautions are provided, such as wearing protective equipment when compressing springs or lifting heavy parts, and ensuring fluids are contained. Technicians are instructed to mark harnesses and note the installation positions of parts.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual Instant...f8seodkdmdmed3
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 35 individual steps to remove components like seals, springs, plates, sensors and housings. Detailed illustrations accompany each step to show precisely which components are being removed. Safety notices are included to warn of heavy component weights and spring forces during disassembly. Required specialty tools are also listed to correctly complete each removal step.
Caterpillar cat 160 m motor grader (prefix d9t) service repair manual (d9t000...fujsekfksemmaq
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, control module, yoke assembly, housing, clutch assemblies, gears, seals, sensors and other parts. Detailed instructions are given for using various tools to compress, remove, and separate components. Safety notices are included and components are to be marked for correct reinstallation.
Caterpillar cat 160 m motor grader (prefix d9t) service repair manual (d9t000...fusjefjskekem
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, control module, yoke assembly, housing, clutch assemblies, gears, seals, sensors and other parts. Detailed instructions are given for using various tools to compress, remove, and separate components. Safety notices are included and components are to be marked for correct reinstallation.
Caterpillar cat 160 m motor grader (prefix d9t) service repair manual (d9t000...fjjsekfxswzksmem
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, pistons, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Proper notation of component orientation and quantities is emphasized for reassembly.
Caterpillar cat 160 m motor grader (prefix d9t) service repair manual (d9t000...fujsfkkskekmem
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, control module, yoke assembly, housing, clutch assemblies, gears, seals, sensors and other parts. Detailed instructions are given for using various tools to compress, remove, and separate components. Safety notices are included and components are to be marked for correct reinstallation.
This document provides instructions for disassembling the components of a 992K wheel loader torque converter. It describes removing over 20 individual parts in multiple steps, including the torque converter, modulating valves, pumps, gears, housings, clutches and bearings. Cleanliness is emphasized throughout to prevent contamination. Various tools are required and safety precautions mentioned due to components weighing up to 680kg.
This document provides instructions for disassembling the torque converter of a Caterpillar 992K wheel loader. It lists over 60 steps to remove components like the transmission pump, idler gear, housing assembly, turbine, discs, seals, gears and shaft. Detailed illustrations accompany each step and special tools and lifting equipment are required due to components weighing up to 1250 kg. The goal is to fully separate all internal components to allow inspection and replacement of parts.
This document provides instructions for disassembling the torque converter components of a 988K wheel loader. It lists over 70 separate steps to remove parts like the housing assembly, shaft assembly, carrier assembly, impeller, piston, and hub. Special tools are required for tasks like separating housings and pulling bearings. Proper lifting equipment and safety precautions are advised given the significant weights of parts like the housing assembly and shaft assembly.
This document provides instructions for disassembling a 988K wheel loader torque converter. It lists over 60 separate steps to remove components such as the housing assembly, shaft assembly, carrier assembly, impeller, piston, seals, bearings, and gears. Detailed illustrations accompany each step. Special tools are required to separate certain components, and safety precautions are noted due to the heavy weight of assemblies that need to be lifted out.
This document provides disassembly instructions for a 988H wheel loader torque converter in 3 sentences:
It begins by listing the required tools and parts needed for disassembly. The instructions then describe each step to disassemble the individual components of the torque converter such as removing bolts, seals, bearings, and other parts from the housing, turbine, impeller, shaft, and adapter. Proper lifting equipment is recommended for removing heavy internal components weighing up to 545 kg.
This document provides disassembly instructions for the transmission planetary of a 986H wheel loader. It lists 74 detailed steps to fully disassemble the transmission, including removing planetary gears, clutches, shafts, seals, and housing components. Various tools are required, and safety precautions are noted. Dismantling is a complex process that separates all individual parts of the transmission.
This document provides disassembly instructions for the transmission planetary of a 986H wheel loader. It outlines 59 steps to fully disassemble the transmission, including removing planetary gears, clutch housings, pistons, seals, gears, and other components. Tools required include a transmission repair stand, eyebolts, clamps, retaining ring pliers, external pliers, drivers, and slide hammers. Detailed illustrations accompany each step. Safety precautions are provided to prevent injury from released spring forces.
This document provides disassembly instructions for a 986H wheel loader transmission planetary system in 3 sentences or less:
The document outlines 75 steps to disassemble the transmission planetary system, removing components like planetary gears, clutch housings, pistons, seals, and other parts. Tools required include a transmission repair stand, eyebolts, clamps, retaining ring pliers, external pliers, drivers, and other specialized tools to aid in disassembly. Cleanliness is emphasized as dirt could enter the transmission during disassembly.
More Related Content
Similar to Caterpillar Cat 12M 3 AWD MOTOR GRADER (Prefix N9B) Service Repair Manual (N9B00001 and up).pdf
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix F9B) Service Repair Manual Instant...f8seodkdmdmed3
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 30 steps to completely disassemble the transmission along with required tools. These steps include removing components like the yoke assembly, retaining rings, seals, plates, sensors, clutches, gears, and housing. Detailed illustrations are provided to show how to position and support the transmission during disassembly. Safety notices are also included regarding containing fluids, wearing protective equipment, and handling compressed springs.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix F9B) Service Repair Manual Instant...f8usejkdmmd8i
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 30 steps to completely disassemble the transmission along with required tools. These steps include removing components like the yoke assembly, retaining rings, seals, plates, sensors, clutches, gears, and housing. Detailed illustrations are provided to show how to position and support the transmission during disassembly. Safety notices are also included regarding containing fluids, wearing protective equipment, and handling compressed springs.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix F9B) Service Repair Manual Instant...hean57759707
This document provides the disassembly procedure for a 12M 2 motor grader transmission. It lists over 50 steps to disassemble the transmission along with required tools. Key components that are disassembled include the housing, clutch assemblies, gear assemblies, seals, sensors, pistons and various discs, plates, rings and washers. Detailed illustrations accompany each step to show how to remove the individual parts in the proper sequence. Safety notices are included regarding releasing spring forces and containing fluids.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual Instant...ze6074xunong
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 35 individual steps to remove components like clutches, seals, sensors, gears and housings. Detailed illustrations accompany each step to show how to position the transmission and what fasteners and tools to use. Safety notices are included to handle components and release spring forces properly.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual Instant...f8usejkdmmd8i
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 35 individual steps to remove components like clutches, seals, sensors, housings and more. Detailed illustrations accompany each step and special safety notices are included. Required tools are listed as well as part numbers.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual (R9P000...tingrm81805
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 35 individual steps to disassemble various components of the transmission, including removing housing components, seals, sensors, clutches, and gears. Detailed illustrations accompany each step to show how to position the transmission and which fasteners and tools to use. Safety notices are included regarding containing fluids, wearing protective equipment, and noting part orientations for reassembly.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual (R9P000...hdjsjndndnd
1) The document provides disassembly instructions for a 12M 2 motor grader transmission. It lists over 50 individual steps and required tools to fully disassemble the transmission.
2) Key components that must be removed include the transmission housing, clutch assemblies, gears, seals, bearings, pistons, and various discs, plates, rings, and washers. Detailed illustrations are provided to identify each part.
3) Safety notices are included, warning of heavy component weights and potential for parts to be propelled by released spring forces during disassembly. Orientations of parts must be noted for proper reassembly.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual Instant...hean57759707
1) The document provides disassembly instructions for a 12M 2 motor grader transmission. It lists over 50 individual steps and required tools to fully disassemble the transmission.
2) Key components that must be removed include the transmission housing, clutch assemblies, gears, seals, bearings, pistons, and various discs, plates, rings, and washers. The order and orientation of components is noted for reassembly.
3) Safety precautions are provided, such as wearing protective equipment when compressing springs or lifting heavy parts, and ensuring fluids are contained. Technicians are instructed to mark harnesses and note the installation positions of parts.
Caterpillar Cat 12M 2 MOTOR GRADER (Prefix R9P) Service Repair Manual Instant...f8seodkdmdmed3
This document provides the disassembly procedure for a transmission in a 12M 2 motor grader. It lists over 35 individual steps to remove components like seals, springs, plates, sensors and housings. Detailed illustrations accompany each step to show precisely which components are being removed. Safety notices are included to warn of heavy component weights and spring forces during disassembly. Required specialty tools are also listed to correctly complete each removal step.
Caterpillar cat 160 m motor grader (prefix d9t) service repair manual (d9t000...fujsekfksemmaq
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, control module, yoke assembly, housing, clutch assemblies, gears, seals, sensors and other parts. Detailed instructions are given for using various tools to compress, remove, and separate components. Safety notices are included and components are to be marked for correct reinstallation.
Caterpillar cat 160 m motor grader (prefix d9t) service repair manual (d9t000...fusjefjskekem
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, control module, yoke assembly, housing, clutch assemblies, gears, seals, sensors and other parts. Detailed instructions are given for using various tools to compress, remove, and separate components. Safety notices are included and components are to be marked for correct reinstallation.
Caterpillar cat 160 m motor grader (prefix d9t) service repair manual (d9t000...fjjsekfxswzksmem
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 50 steps to fully disassemble the transmission along with required tools. These steps include removing components like the housing, clutch assemblies, gears, seals, pistons, and sensors. Diagrams are provided to illustrate where each component is located and how to remove it. Proper notation of component orientation and quantities is emphasized for reassembly.
Caterpillar cat 160 m motor grader (prefix d9t) service repair manual (d9t000...fujsfkkskekmem
This document provides disassembly instructions for the transmission of a 160M Motor Grader. It lists over 40 steps and accompanying illustrations to remove components like the transmission, control module, yoke assembly, housing, clutch assemblies, gears, seals, sensors and other parts. Detailed instructions are given for using various tools to compress, remove, and separate components. Safety notices are included and components are to be marked for correct reinstallation.
Similar to Caterpillar Cat 12M 3 AWD MOTOR GRADER (Prefix N9B) Service Repair Manual (N9B00001 and up).pdf (14)
This document provides instructions for disassembling the components of a 992K wheel loader torque converter. It describes removing over 20 individual parts in multiple steps, including the torque converter, modulating valves, pumps, gears, housings, clutches and bearings. Cleanliness is emphasized throughout to prevent contamination. Various tools are required and safety precautions mentioned due to components weighing up to 680kg.
This document provides instructions for disassembling the torque converter of a Caterpillar 992K wheel loader. It lists over 60 steps to remove components like the transmission pump, idler gear, housing assembly, turbine, discs, seals, gears and shaft. Detailed illustrations accompany each step and special tools and lifting equipment are required due to components weighing up to 1250 kg. The goal is to fully separate all internal components to allow inspection and replacement of parts.
This document provides instructions for disassembling the torque converter components of a 988K wheel loader. It lists over 70 separate steps to remove parts like the housing assembly, shaft assembly, carrier assembly, impeller, piston, and hub. Special tools are required for tasks like separating housings and pulling bearings. Proper lifting equipment and safety precautions are advised given the significant weights of parts like the housing assembly and shaft assembly.
This document provides instructions for disassembling a 988K wheel loader torque converter. It lists over 60 separate steps to remove components such as the housing assembly, shaft assembly, carrier assembly, impeller, piston, seals, bearings, and gears. Detailed illustrations accompany each step. Special tools are required to separate certain components, and safety precautions are noted due to the heavy weight of assemblies that need to be lifted out.
This document provides disassembly instructions for a 988H wheel loader torque converter in 3 sentences:
It begins by listing the required tools and parts needed for disassembly. The instructions then describe each step to disassemble the individual components of the torque converter such as removing bolts, seals, bearings, and other parts from the housing, turbine, impeller, shaft, and adapter. Proper lifting equipment is recommended for removing heavy internal components weighing up to 545 kg.
This document provides disassembly instructions for the transmission planetary of a 986H wheel loader. It lists 74 detailed steps to fully disassemble the transmission, including removing planetary gears, clutches, shafts, seals, and housing components. Various tools are required, and safety precautions are noted. Dismantling is a complex process that separates all individual parts of the transmission.
This document provides disassembly instructions for the transmission planetary of a 986H wheel loader. It outlines 59 steps to fully disassemble the transmission, including removing planetary gears, clutch housings, pistons, seals, gears, and other components. Tools required include a transmission repair stand, eyebolts, clamps, retaining ring pliers, external pliers, drivers, and slide hammers. Detailed illustrations accompany each step. Safety precautions are provided to prevent injury from released spring forces.
This document provides disassembly instructions for a 986H wheel loader transmission planetary system in 3 sentences or less:
The document outlines 75 steps to disassemble the transmission planetary system, removing components like planetary gears, clutch housings, pistons, seals, and other parts. Tools required include a transmission repair stand, eyebolts, clamps, retaining ring pliers, external pliers, drivers, and other specialized tools to aid in disassembly. Cleanliness is emphasized as dirt could enter the transmission during disassembly.
This document provides assembly instructions for a torque converter in a 982M wheel loader. It lists 51 steps to assemble the internal components of the torque converter and attach it to the transmission and output transfer gears. The required tools include link brackets, guide studs, retaining ring pliers, and a transmission repair stand. The final step is to connect the assembled torque converter to the transmission and output transfer gears. A separate section provides 5 steps to separate the transmission from the output transfer gears, including removing bolts and disconnecting harnesses and tubes.
The document provides instructions for assembling a torque converter and separating a transmission from output transfer gears on a 982M wheel loader. It includes 51 steps to assemble the torque converter by installing various components like seals, bearings, gears, and housings. It also lists 5 steps to separate the transmission from the output transfer gears by removing bolts, harnesses, tubes, and solenoids. Tools required include link brackets, a lever puller hoist, and a transmission repair stand.
The document provides instructions for assembling and disassembling components of a 982M wheel loader transmission powered by a C13 engine. It describes 51 steps to assemble the torque converter lock up clutch and freewheel stator. It also describes 5 steps to separate the transmission from the output transfer gears, including removing bolts, harnesses, tubes, and solenoids. Tools including links, brackets, and a transmission repair stand are required.
This document provides disassembly and assembly instructions for the torque converter of a 982M wheel loader. It includes 46 steps to disassemble components such as the torque converter housing, pump adapter, gears, bearings and seals. The assembly section includes 52 steps to install these components in reverse order, noting orientation and torque specifications. Tools required include link brackets, push-pullers, driver groups and retaining ring pliers.
1. The document provides disassembly and assembly instructions for the lock up clutch and freewheel stator of a 980M wheel loader torque converter.
2. It lists 46 steps to disassemble components and 45 steps to reassemble them, providing illustrations and required tools for each step.
3. The components include housing, gears, seals, bearings, plates, disks, and an impeller that must be carefully disassembled and reassembled.
This document provides assembly instructions for connecting a torque converter to a transmission in a 980M wheel loader. It outlines 51 steps to assemble seals, gears, shafts, bearings, plates and other components. The summary separates the transmission from the output transfer gears by removing housings, bolts, solenoids and disconnecting wiring and tubes. Lifting devices and tools are used to safely handle components weighing up to 1406 kg.
The document provides instructions for assembling a torque converter and connecting it to a transmission. It lists 51 steps to assemble the torque converter components and attach it to the transmission housing. It then describes 5 steps to separate the transmission from the output transfer gears, including removing bolts, disconnecting electrical and hydraulic lines, and lifting components with the specified tools. The purpose is to connect or separate the torque converter, transmission, and output transfer gears on a 980M wheel loader.
This service repair manual provides instructions for assembling the lock up clutch and freewheel stator for the torque converter in a 980M wheel loader. It outlines 51 steps to install various components like seals, bearings, gears, and housings. When complete, the final steps are to connect the assembled torque converter to the transmission and output transfer gears.
The document provides step-by-step instructions for assembling a torque converter for a 980M wheel loader. It details 51 steps for installing various components like seals, bearings, gears, and housing pieces. Proper tools and torque specifications are listed to ensure correct assembly.
This document provides assembly instructions for a piston pump used in a 980L wheel loader. It describes how to assemble the pump components including installing bearings, seals, bushings, springs and shims. Proper assembly of rotating groups and timing of cylinder barrels is critical for smooth and quiet pump operation. Assembly is completed by installing lubrication tubes, port plates and housings while ensuring proper alignment of components.
This service manual provides instructions for assembling the torque converter of a 980H Wheel Loader. It details 69 steps requiring various tools to install over 40 individual parts in the proper order. The assembly begins with installing the sleeve bearing in the cover assembly and ends by connecting the assembled torque converter to the transmission and output gears. Key steps include installing the turbine, stator, carrier assembly, drive gear, idler gear, relief valve assembly, pump adapter, and torque converter cover.
This document provides instructions for disassembling and assembling the freewheel stator component of a 980H wheel loader torque converter. It lists over 50 individual steps to remove parts like bearings, gears, seals, and housings. Tools required include various pullers, drivers, and pins. Cleanliness is emphasized during assembly, with parts cleaned and oiled before being pressed or installed in the specified order.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 12M 3 AWD MOTOR GRADER N9B
Configuration: 12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Power Train
Media Number -UENR3483-02 Publication Date -01/01/2014 Date Updated -10/04/2018
i07077362
Transmission - Disassemble
SMCS - 3030-015; 3159-015; 3176-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 3
B 422-8733 Jack Stand Gp 3
C 1U-9202 Lever Puller Hoist 1
D 1P-1863 Retaining Ring Pliers 1
E 308-3470 Jack Stand Gp 2
F 140-7742 Sleeve 1
G 154-6181 Forcing Bolt 2
H FT-2769 Table 1
J 4C-8156 Lifting Fixture 1
K
1U-6410 Three Jaw Puller 1
1P-0510 Driver Gp 1
L 9U-7480 Compressing Tube 1
5P-7970 Nut 1
8T-4224 Hard Washer 1
- 1
1/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWERE...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Bolt
M8 - 1.25 by 460mm
M 8B-7548 Push-Puller Tool Gp 1
N 2P-8312 Retaining Ring Pliers 1
P
1P-2321 Combination Puller 1
1P-0510 Driver Gp 1
R
189-0408 Shackle As 1
3E-3882 Eyebolt 1
S
126-7175 Push-Puller Tool Gp 1
4C-5653 Threaded Adapter 1
1P-0510 Driver Gp 1
Start By:
a. Remove the transmission.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all harness assemblies for installation purposes.
2/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWERE...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g01386565
1. Attach Tooling (A) and a suitable lifting device to transmission (1). The weight of
transmission (1) is approximately 862 kg (1900 lb). Use Tooling (A) and the suitable lifting
device to position transmission (1) onto Tooling (B). Remove hose assembly (2).
Illustration 2 g01386568
2. Remove bolts (3) to remove control module (4) and spacers (5).
3/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWERE...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 3 g01386574
3. Remove yoke assembly (6).
Illustration 4 g01386575
4. Remove retaining ring (7).
5. Remove cup (8). Remove O-ring seal (9).
Illustration 5 g01386579
6. Attach Tooling (A), Tooling (C), and a suitable lifting device to transmission (1). Use
Tooling (A), Tooling (C), and the suitable lifting device to position transmission (1) onto
Tooling (B) and suitable cribbing. Position transmission (1) with the output shaft upward.
4/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWERE...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 6 g01386585
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
7. Remove bolts (10) to remove plate assembly (11).
Illustration 7 g01386589
8. Remove lip seal (12).
5/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWERE...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 8 g01386599
9. Use Tooling (D) to remove retaining ring (13). Remove coned disc springs (14).
Note: Note the orientation of coned disc springs (14) for assembly purposes.
Illustration 9 g01386610
10. Remove O-ring seal (15) and piston (16).
6/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWERE...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 10 g01386621
11. Remove piston seal (17). Remove piston seal (18).
Illustration 11 g01386624
12. Disconnect harness assembly (19) and harness assembly (21). Remove guard (20).
Illustration 12 g01386632
13. Remove bolts (22). Use two people to remove housing (23). The weight of housing (23) is
approximately 20 kg (45 lb).
7/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWERE...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 13 g01386646
14. Remove pressure sensor (24) and the O-ring seal. Remove solenoid (25).
Illustration 14 g01386658
15. Remove O-ring seal (26), O-ring seal (27), O-ring seal (28), O-ring seal (29), and O-ring
seal (30).
Illustration 15 g01386662
16. Remove seal (31).
Illustration 16 g01386663
8/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWERE...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 17. Remove friction discs (32) and clutch plates (33).
Note: Note the quantity and the order of friction discs (32) and clutch plates (33) for
assembly purposes.
18. Remove O-ring seals (34) and dowels (35).
Illustration 17 g01386675
19. Remove retaining ring (36). Remove hub (37).
Illustration 18 g01386684
20. Attach Tooling (A), Tooling (C), Tooling F, and a suitable lifting device to transmission (1).
Use Tooling (A), Tooling (C), Tooling (F), and the suitable lifting device to position
transmission (1) onto Tooling (B) and Tooling (E) with the output shaft downward. The
weight of transmission (1) is approximately 862 kg (1900 lb).
9/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWERE...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 19 g01386730
21. Remove bolt (38) to remove speed sensor (39) and guard (40).
Illustration 20 g01386747
22. Remove bolts (41) to remove speed sensor (42) and speed sensor (43).
Illustration 21 g01386749
23. Remove cover (44).
10/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 22 g01386757
24. Remove bolts (45) to remove speed sensor (46) and speed sensor (47).
Illustration 23 g01386764
25. Attach Tooling (A), Tooling (C), and a suitable lifting device to housing (49). The weight of
housing (49) is approximately 136 kg (300 lb). Remove bolts (48).
26. Use Tooling (A), Tooling (C), and the suitable lifting device to remove housing (49).
Note: If necessary, use Tooling (G) to assist in removal of housing (49).
Illustration 24 g01386792
11/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 27. Remove O-ring seal (50). Remove bolts (51) and the locks. Remove tube assembly (52) and
the O-ring seal.
Illustration 25 g01386795
28. Remove bolts (53) to remove seal carrier (54). Remove bolts (55) to remove seal carrier
(56).
Illustration 26 g01386797
29. Remove seal rings (57). Remove O-ring seals (58). Repeat this step for the remaining seal
carrier.
Illustration 27 g01386811
12/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 28 g01386815
30. Use Tooling (J) and a suitable lifting device to remove clutch assembly (59) and clutch
assembly (60). The combined weight of clutch assembly (59) and clutch assembly (60) is
approximately 163 kg (360 lb).
31. Position clutch assembly (59) and clutch assembly (60) onto Tooling (H). If necessary,
support clutch assembly (60) with suitable cribbing.
32. Remove Tooling (J) to separate clutch assembly (59) from clutch assembly (60).
Illustration 29 g01386827
33. Use Tooling (K) to remove bearing (61) and rotor (62) from clutch assembly (59).
Note: Be sure to attach Tooling (K) to gear assembly (63) to prevent damage to rotor (62).
13/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 30 g01386841
34. Remove thrust washer (64) and gear assembly (63).
Note: Note the orientation of thrust washer (64) for assembly purposes.
Illustration 31 g01386992
35. Remove bearing sleeves (65) from gear assembly (63).
Illustration 32 g01386993
36. Remove thrust washer (66).
14/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Note: Note the orientation of thrust washer (66) for assembly purposes.
Illustration 33 g01386997
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
37. Use Tooling (L) to compress hub assembly (67). Remove lock rings (68) and two half rings
(69) (not shown).
Note: Note the orientation of lock rings (68) and two ring halves (69) for assembly
purposes.
Illustration 34 g01387088
15/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 38. Remove hub assembly (67), friction discs (70), and clutch plates (71).
Note: Note the order of friction discs (70) and clutch plates (71) for assembly purposes.
Illustration 35 g01387093
39. Remove wave spring (72) and piston (73).
Illustration 36 g01387119
40. Remove seal rings (74) and (75) from piston (73).
Illustration 37 g01387137
16/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 41. Use a suitable lifting device to turn over clutch assembly (59). The weight of clutch
assembly (59) is approximately 59 kg (130 lb).
Illustration 38 g01387150
Illustration 39 g01387221
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
42. Use Tooling (M) to remove bearing (76). Remove thrust washer (77), thrust disc (78), and
gear assembly (79).
Note: Note the orientation of thrust disc (78) for assembly purposes.
17/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 40 g01387228
43. Remove thrust disc (80), washer (81), half rings (82), and lock rings (83).
Note: Note the orientation of thrust disc (80) for assembly purposes.
Illustration 41 g01387232
44. Remove hub assembly (84). Remove friction discs (85) and clutch plates (86).
Note: Note the orientation of friction discs (85) and clutch plates (86) for assembly
purposes.
18/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 42 g01387235
45. Use Tooling (N) to remove retaining ring (87).
46. Remove balance piston (88). Remove seal ring (89) from balance piston (88).
47. Remove springs (90).
48. Remove piston (91). Remove seal rings (92) and (93) from piston (91).
Illustration 43 g01387511
49. Use Tooling (K) to remove inner bearing (94) from clutch assembly (60). Remove thrust
disc (95) and gear (96).
Note: Note the orientation of thrust disc (95) for assembly purposes.
Illustration 44 g01387520
50. Remove thrust disc (97) and gear assembly (98) from clutch assembly (60).
Note: Note the orientation of thrust disc (97) for assembly purposes.
19/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 45 g01387526
51. Remove sleeve bearing (99) from gear assembly (98).
Illustration 46 g01387528
52. Remove thrust disc (100) and washer (101) from clutch assembly (60).
Note: Note the orientation of thrust disc (100) for assembly purposes.
Illustration 47 g01387541
20/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
53. Use Tooling (L) to compress hub assembly (102). Remove lock rings (103) and two half
rings (104) (not shown).
Note: Note the orientation of lock rings (103) and two ring halves (104) for assembly
purposes.
Illustration 48 g01387556
54. Remove hub assembly (102), friction discs (105), and clutch plates (106) from clutch
assembly (60).
Note: Note the orientation of friction discs (105) and clutch plates (106) for assembly
purposes.
21/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 49 g01387573
55. Remove wave spring (107) and piston (108) from clutch assembly (60).
Illustration 50 g01387580
56. Remove seal rings (109) and (110) from piston (108).
Illustration 51 g01387592
57. Use a suitable lifting device to turn over clutch assembly (60) onto Tooling (H). The weight
of clutch assembly (60) is approximately 54 kg (120 lb).
22/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 52 g01387595
58. Use Tooling (P) to remove inner bearing (111), thrust disc (112), and gear (113) from clutch
assembly (60).
Note: Note the orientation of thrust disc (112) for assembly purposes.
Illustration 53 g01387755
59. Remove thrust disc (114) and gear assembly (115).
Note: Note the orientation of thrust disc (114) for assembly purposes.
23/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 54 g01387765
60. Remove bearing (116) from gear assembly (115).
Illustration 55 g01387820
61. Remove thrust disc (117) and washer (118).
Note: Note the orientation of thrust disc (117) for assembly purposes.
Illustration 56 g01387824
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
24/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. 62. Use Tooling (L) to compress hub assembly (119). Remove lock rings (120) and two half
rings (121) (not shown).
Note: Note the orientation of lock rings (120) and two ring halves (121) for assembly
purposes.
Illustration 57 g01387846
63. Remove hub assembly (119), friction discs (122), and clutch plates (123).
Note: Note the orientation of friction discs (122) and clutch plates (123) for assembly
purposes.
Illustration 58 g01387852
64. Remove wave spring (124) and piston (125).
25/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 59 g01387858
65. Remove seal rings (126) and (127) from piston (125).
Illustration 60 g01387876
66. Use Tooling (P) to remove inner bearing (128) and gear (129) from input shaft assembly
(130). This is necessary at this time so that you can remove the remaining two clutch
assemblies.
Illustration 61 g01387884
67. Remove bolts (131) to remove seal carrier (132).
26/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 62 g01387892
68. Remove seal rings (133). Remove O-ring seals (134).
Illustration 63 g01387895
69. Attach Tooling (R) and a suitable lifting device to clutch assembly (135). The weight of
clutch assembly (135) is approximately 61 kg (135 lb). Use Tooling (R) and the suitable
lifting device to remove clutch assembly (135). Position clutch assembly (135) onto Tooling
(H).
Illustration 64 g01387898
27/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. 70. Use Tooling (P) to remove inner bearing (136), spacer (137), and gear (138) from clutch
assembly (135).
Illustration 65 g01388168
71. Remove spacer (139) and thrust disc (140) from clutch assembly (135).
Note: Note the orientation of thrust disc (140) for assembly purposes.
72. Remove gear assembly (141), thrust disc (142), and washer (143).
Note: Note the orientation of thrust disc (142) for assembly purposes.
Illustration 66 g01388185
73. Remove bearing (144) from gear assembly (141).
28/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
31. Illustration 67 g01388208
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
74. Use Tooling (L) to compress hub assembly (145). Remove lock rings (146) and two half
rings (147) (not shown).
Note: Note the orientation of lock rings (146) and two ring halves (147) for assembly
purposes.
Illustration 68 g01388240
75. Remove hub assembly (145), friction discs (148), and clutch plates (149).
29/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
32. Note: Note the orientation of friction discs (148) and clutch plates (149) for assembly
purposes.
Illustration 69 g01388243
76. Remove wave spring (150) and piston (151).
Illustration 70 g01388246
77. Remove seal rings (152) and (153) from piston (151).
Illustration 71 g01388263
30/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
33. Illustration 72 g01388277
78. Use a suitable lifting device to turn over clutch assembly (135) onto Tooling (H). The
weight of clutch assembly (135) is approximately 41 kg (90 lb).
79. Attach Tooling (S) to clutch assembly (135) to remove inner bearing (154). Remove thrust
race (155), thrust disc (156), thrust disc (157), and gear assembly (158).
Note: Note the orientation of thrust discs (156) and (157) for assembly purposes.
Illustration 73 g01388296
80. Remove roller bearing assembly (159) and thrust disc (160) from clutch assembly (135).
Note: Note the orientation of thrust disc (160) for assembly purposes.
31/45
12M Series 3 Motor Grader-All Wheel Drive N9B00001-UP (MACHINE) POWER...
2021/3/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...