This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 45 steps to fully disassemble these components, including removing housing components, gears, seals, bearings, and other parts. Various tools are required to separate pieces and remove fasteners. Weights of individual parts are provided to aid safe handling during disassembly. Notes emphasize cleaning parts and documenting shim quantities and orders.
Caterpillar cat 120 m series 2 motor grader (prefix r9n) service repair manua...fjsjjekdkme
This document provides instructions for disassembling the transmission of a 120M Series 2 Motor Grader. It lists over 40 individual steps and provides illustrations for each step. The transmission must be removed from the grader and various components disassembled, including housing components, gears, seals, plates, and sensors. Special tools are required and spring forces must be released safely. The process involves removing over 50 individual parts in a specific sequence.
Caterpillar cat 120 m series 2 motor grader (prefix m9h) service repair manua...fjsjjekdkme
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M Series 2 Motor Grader. It lists 42 steps to fully disassemble these components, including removing gears, bearings, seals, housings, and other parts. Special tools are required and weights of parts are provided. Safety notices are included and parts must be kept clean to prevent contamination.
Caterpillar cat 312 c excavator (prefix fds) service repair manual (fds00001 ...fjsjjekdkme
This document provides disassembly instructions for the 312C and 312C L excavator final drive, travel motor, and travel counterbalance valve systems. It outlines 17 steps to disassemble the final drive which includes removing covers, plates, gears, and bearings. It also details 13 steps to disassemble the travel motor such as removing piston assemblies, seals, and barrel components. Finally, it lists 15 steps for disassembling the travel counterbalance valve including removing springs, spools, valves, and housings. Personal safety notices are included throughout regarding releasing pressures and contained parts.
Claas nectis f 227 2+4 wd (type t16) tractor service repair manualfjsjjekdkme
This document provides specifications for Iveco "NEF" diesel engines, including 3 and 4 cylinder atmospheric and turbocharged models. It describes the engines' lubrication and cooling systems, dimensions of components like pistons and cylinders, and torque specifications. The document stresses that performance data is only valid if installation recommendations are followed.
Massey ferguson mf 362 n tractor (japan only) parts catalogue manualfjsjjekdkme
This document provides specifications for a Massey Ferguson MF 362 N tractor intended for the Japanese market only. It includes detailed parts lists and descriptions for the engine, cylinder block, crankshaft, pistons, cylinder head, and other components. Reference part numbers are given for each item along with other identifying information.
Massey ferguson mf 375 tractor, b18008 parts catalogue manualfjsjjekdkme
The document provides parts information for the engine of a Massey Ferguson MF 375 tractor, including the engine block, crankshaft, pistons, cylinder head, and other components. It lists 33 individual parts by number, quantity, part number, description, and other identifying information. Notes are provided to indicate application and replacement part numbers for some items. The list repeats over multiple pages and sections in a consistent tabular format.
Massey ferguson mf 265 tractor, 193552 (gb) parts catalogue manualfjsjjekdkme
The document contains parts lists and diagrams for various components of a Massey Ferguson MF 265 tractor, including the cylinder block, cylinder head, crankshaft, timing gear, and other systems. It lists 46 individual parts that make up the timing gear assembly, providing part numbers, quantities, descriptions, and comments for each item. Reference numbers and page numbers are included throughout.
Caterpillar cat 938 f wheel loader (prefix 2rm) service repair manual (2rm000...hhfjksekmm
This document provides instructions for disassembling and assembling axle shaft assemblies for a 938F wheel loader. The main steps include:
1. Removing the front and rear axle housing groups.
2. Disassembling the axle shaft assembly by removing the axle shaft, planetary carrier assembly, and planetary gears.
3. Assembling the axle shaft assembly by installing new bearings, seals, and adjusting the preload on the bearings to between 4.0-9.0 Nm of rolling torque.
Caterpillar cat 120 m series 2 motor grader (prefix r9n) service repair manua...fjsjjekdkme
This document provides instructions for disassembling the transmission of a 120M Series 2 Motor Grader. It lists over 40 individual steps and provides illustrations for each step. The transmission must be removed from the grader and various components disassembled, including housing components, gears, seals, plates, and sensors. Special tools are required and spring forces must be released safely. The process involves removing over 50 individual parts in a specific sequence.
Caterpillar cat 120 m series 2 motor grader (prefix m9h) service repair manua...fjsjjekdkme
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M Series 2 Motor Grader. It lists 42 steps to fully disassemble these components, including removing gears, bearings, seals, housings, and other parts. Special tools are required and weights of parts are provided. Safety notices are included and parts must be kept clean to prevent contamination.
Caterpillar cat 312 c excavator (prefix fds) service repair manual (fds00001 ...fjsjjekdkme
This document provides disassembly instructions for the 312C and 312C L excavator final drive, travel motor, and travel counterbalance valve systems. It outlines 17 steps to disassemble the final drive which includes removing covers, plates, gears, and bearings. It also details 13 steps to disassemble the travel motor such as removing piston assemblies, seals, and barrel components. Finally, it lists 15 steps for disassembling the travel counterbalance valve including removing springs, spools, valves, and housings. Personal safety notices are included throughout regarding releasing pressures and contained parts.
Claas nectis f 227 2+4 wd (type t16) tractor service repair manualfjsjjekdkme
This document provides specifications for Iveco "NEF" diesel engines, including 3 and 4 cylinder atmospheric and turbocharged models. It describes the engines' lubrication and cooling systems, dimensions of components like pistons and cylinders, and torque specifications. The document stresses that performance data is only valid if installation recommendations are followed.
Massey ferguson mf 362 n tractor (japan only) parts catalogue manualfjsjjekdkme
This document provides specifications for a Massey Ferguson MF 362 N tractor intended for the Japanese market only. It includes detailed parts lists and descriptions for the engine, cylinder block, crankshaft, pistons, cylinder head, and other components. Reference part numbers are given for each item along with other identifying information.
Massey ferguson mf 375 tractor, b18008 parts catalogue manualfjsjjekdkme
The document provides parts information for the engine of a Massey Ferguson MF 375 tractor, including the engine block, crankshaft, pistons, cylinder head, and other components. It lists 33 individual parts by number, quantity, part number, description, and other identifying information. Notes are provided to indicate application and replacement part numbers for some items. The list repeats over multiple pages and sections in a consistent tabular format.
Massey ferguson mf 265 tractor, 193552 (gb) parts catalogue manualfjsjjekdkme
The document contains parts lists and diagrams for various components of a Massey Ferguson MF 265 tractor, including the cylinder block, cylinder head, crankshaft, timing gear, and other systems. It lists 46 individual parts that make up the timing gear assembly, providing part numbers, quantities, descriptions, and comments for each item. Reference numbers and page numbers are included throughout.
Caterpillar cat 938 f wheel loader (prefix 2rm) service repair manual (2rm000...hhfjksekmm
This document provides instructions for disassembling and assembling axle shaft assemblies for a 938F wheel loader. The main steps include:
1. Removing the front and rear axle housing groups.
2. Disassembling the axle shaft assembly by removing the axle shaft, planetary carrier assembly, and planetary gears.
3. Assembling the axle shaft assembly by installing new bearings, seals, and adjusting the preload on the bearings to between 4.0-9.0 Nm of rolling torque.
Caterpillar cat 312 c excavator (prefix fds) service repair manual (fds00301 ...fjsjjekdkme
1. The document provides instructions for removing and installing the front housing of a 312C excavator engine.
2. To remove the front housing, several other components must first be removed, including the alternator, water pump, and crankshaft pulley. Bolts securing the front housing to other parts are then loosened and removed.
3. Installation involves cleaning surfaces, installing new seals if needed, and securing the front housing with bolts to the cylinder block, oil pan, and other parts. Timing gear alignment must also be checked during installation.
This document provides specifications and dimensions for "NEF" diesel engines, including 3 and 4 cylinder models. It describes the engine systems such as lubrication, cooling, turbocharging, and dimensions of components. The lubrication system uses a lobe oil pump to circulate oil through the crankshaft, camshaft, cylinder head and oil cooler. The cooling system has a radiator, visco-static fan, water pump, thermostat and oil cooler. Turbocharged models include an air filter and exhaust-driven turbocharger. Detailed dimensions are provided for build clearances, engine block components, cylinder head and valves. Torque specifications are also listed.
Claas nectis ve 217 2+4 wd (type t14) tractor service repair manualfjsjjekdkme
1) The document provides identification information for injector pumps and injectors used in various tractor models. It identifies the manufacturer, models, and specifications.
2) It describes the components and operating principles of the fuel injection system, including the fuel tank, lines, filters, pump, and injectors. Diagrams show the components and flow of fuel.
3) Instructions are provided for checking and adjusting aspects of the system, such as setting the accelerator control cable and adjusting the internal timing of the injector pump. Torque specifications are also listed.
Massey ferguson mf 24 combine parts catalogue manualfjsjjekdkme
The document provides a parts list and technical specifications for a Massey Ferguson MF 24 combine harvester with the serial number 819723. It includes over 50 numbered items with corresponding part numbers, quantities, descriptions, and additional comments. The parts are grouped into sections covering the straw divider, knives and fingers, wearing plates and stone stops, counter shaft, guarding, and feeder drum.
Massey ferguson mf 390 tractor, b18008 parts catalogue manualfjsjjekdkme
This document provides parts information for a Massey Ferguson 390 tractor. It includes 5 pages describing engine parts like the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each part lists the part number, quantity, description, and additional comments. Serial numbers or engine numbers are referenced for some parts that may change over time.
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...hhfjksekmm
The document provides instructions for installing a crankshaft in 3 steps:
1. Install the lower halves of the crankshaft main bearings in the crankshaft main bearing caps.
2. Carefully lower the crankshaft into position in the cylinder block and install the main bearing caps.
3. Check the end play of the crankshaft using a dial indicator and ensure it is within the specified range.
Caterpillar cat 345 d l excavator (prefix eeh) service repair manual (eeh0000...hhfjksekmm
This document provides instructions for disassembling and assembling the final drive of a 345D L excavator. It lists the required tools and parts and provides step-by-step instructions to disassemble the various components of the final drive, including removing the cover, carrier assemblies, ring gear, and other parts. It then describes the assembly process in reverse, including pressing in bearings, installing seals, and reassembling the carriers and other components.
Caterpillar cat 345 d l excavator (prefix rgg) service repair manual (rgg0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists 31 steps to fully disassemble the travel motor by removing components like the head, plates, seals, pins, brake piston and rotating group. Reassembly requires reinstalling these parts in reverse order, taking care to mark components' locations and clean all parts to prevent contaminating the hydraulic system. Proper tools are listed to facilitate disassembly and assembly.
Massey ferguson mf 24 combine engines (perkins) parts catalogue manualfjsjjekdkme
This document provides parts information for Massey Ferguson MF 24/27/29/29 XP/31/31 XP combine engines with Perkins engines. It includes detailed parts lists, part numbers, quantities and descriptions for the engine cylinder block, crankshaft, pistons, connecting rods, cylinder head and other engine components. The parts lists reference exploded diagrams of the engine systems and components.
Massey ferguson mf 7254 combine parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table augers of Massey Ferguson MF 7254/7256 combines. It includes 142 line items with part numbers, quantities, descriptions, and additional comments for components ranging from clips and bolts to knives, plates, shafts and augers for header widths ranging from 14' to 20'. Footnotes provide additional information on variations in components between different configurations.
Massey ferguson mf 7272 cerea combines parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table augers for Massey Ferguson MF 7272/7274/7278 CEREA combines. It includes 161 items with part numbers, quantities, descriptions, and other identifying information for each part. Footnotes provide additional details on some parts that have multiple options or applications. The parts are organized into sections for the knives and fingers - freeflow system (items 1-67), and the table auger right hand and left hand (items 68-161).
Caterpillar cat 120 m motor grader (prefix r9a) service repair manual (r9a000...fjsekkdmmmse
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M Motor Grader. It includes 49 detailed illustrations and steps to disassemble the components. The assembly procedure includes required tools and references assembling the components in reverse order.
Caterpillar cat 120 m motor grader (prefix r9a) service repair manual (r9a000...fjsjjekdkme
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It describes 46 separate steps to fully disassemble these components, including removing housing components, gears, seals, bearings, and other parts. Various tools are required, and notes are provided about part ordering and weights of components being removed. The goal is to break down these drivetrain components into their smallest indivisible parts for repair or replacement.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...ufjskekdjdmw2
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 46 steps to fully disassemble these components, including removing housing components, gears, seals, and bearings. Various tools are required, and notes provide guidance on tracking shim quantities and order. Worker safety is emphasized when removing components under spring force.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...udjkdksmmd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 46 steps to fully disassemble these components, including removing housing components, gears, seals, and bearings. Various tools are required, and notes provide guidance on tracking shim quantities and order. Worker safety is emphasized when removing components under spring force.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual Instant ...udjkskdmmd
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 49 steps to fully disassemble these components, removing items like bearings, seals, gears, and housings. Reassembly follows the reverse of the disassembly process, noting to inspect parts and apply threadlock or sealant compounds during assembly. Tools required are also listed.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...ufuejkdkmdm
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 49 steps to fully disassemble these components, removing items like bearings, seals, gears, and housings. Reassembly requires following the disassembly steps in reverse order while precisely positioning shims and applying thread locking compounds or sealants as specified. Tools including pullers, wrenches, micrometers and dial indicators are required.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual Instant ...yan77xunhao
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 46 steps to fully disassemble these components, including removing housing components, gears, seals, and bearings. Various tools are required, and notes provide guidance on tracking shim quantities and order. Worker safety is emphasized when removing components under spring force.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...vvnj41316031
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 49 steps to fully disassemble these components, removing items like bearings, seals, gears, and housings. Reassembly follows the reverse of these steps, noting to inspect parts and apply threadlock or sealant compounds in some areas. Required tools include pullers, wrenches, dial indicators, and other equipment to properly separate and replace components.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...jdkksmemmd
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 49 steps to fully disassemble these components, removing items like bearings, seals, gears, and housings. Reassembly follows the reverse of these steps, noting to inspect parts and apply threadlock or sealant compounds in some areas. Required tools include pullers, wrenches, micrometers and other equipment to take the system apart and put it back together properly.
Caterpillar cat 120 m motor grader (prefix b9n) service repair manual (b9n000...fjskksmem
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 49 steps to fully disassemble these components, removing parts like bearings, seals, gears, and housings. Diagrams illustrate each step. Proper tools are listed. Assembly follows the reverse of the disassembly process, with notes on applying threadlock and bearing mount compounds during reassembly.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...gen78guozun
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 46 steps to fully disassemble these components, including removing housing components, gears, seals, and bearings. Various tools are required, and notes provide guidance on tracking shim quantities and order. Worker safety is emphasized when removing components under spring force.
Caterpillar cat 312 c excavator (prefix fds) service repair manual (fds00301 ...fjsjjekdkme
1. The document provides instructions for removing and installing the front housing of a 312C excavator engine.
2. To remove the front housing, several other components must first be removed, including the alternator, water pump, and crankshaft pulley. Bolts securing the front housing to other parts are then loosened and removed.
3. Installation involves cleaning surfaces, installing new seals if needed, and securing the front housing with bolts to the cylinder block, oil pan, and other parts. Timing gear alignment must also be checked during installation.
This document provides specifications and dimensions for "NEF" diesel engines, including 3 and 4 cylinder models. It describes the engine systems such as lubrication, cooling, turbocharging, and dimensions of components. The lubrication system uses a lobe oil pump to circulate oil through the crankshaft, camshaft, cylinder head and oil cooler. The cooling system has a radiator, visco-static fan, water pump, thermostat and oil cooler. Turbocharged models include an air filter and exhaust-driven turbocharger. Detailed dimensions are provided for build clearances, engine block components, cylinder head and valves. Torque specifications are also listed.
Claas nectis ve 217 2+4 wd (type t14) tractor service repair manualfjsjjekdkme
1) The document provides identification information for injector pumps and injectors used in various tractor models. It identifies the manufacturer, models, and specifications.
2) It describes the components and operating principles of the fuel injection system, including the fuel tank, lines, filters, pump, and injectors. Diagrams show the components and flow of fuel.
3) Instructions are provided for checking and adjusting aspects of the system, such as setting the accelerator control cable and adjusting the internal timing of the injector pump. Torque specifications are also listed.
Massey ferguson mf 24 combine parts catalogue manualfjsjjekdkme
The document provides a parts list and technical specifications for a Massey Ferguson MF 24 combine harvester with the serial number 819723. It includes over 50 numbered items with corresponding part numbers, quantities, descriptions, and additional comments. The parts are grouped into sections covering the straw divider, knives and fingers, wearing plates and stone stops, counter shaft, guarding, and feeder drum.
Massey ferguson mf 390 tractor, b18008 parts catalogue manualfjsjjekdkme
This document provides parts information for a Massey Ferguson 390 tractor. It includes 5 pages describing engine parts like the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each part lists the part number, quantity, description, and additional comments. Serial numbers or engine numbers are referenced for some parts that may change over time.
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...hhfjksekmm
The document provides instructions for installing a crankshaft in 3 steps:
1. Install the lower halves of the crankshaft main bearings in the crankshaft main bearing caps.
2. Carefully lower the crankshaft into position in the cylinder block and install the main bearing caps.
3. Check the end play of the crankshaft using a dial indicator and ensure it is within the specified range.
Caterpillar cat 345 d l excavator (prefix eeh) service repair manual (eeh0000...hhfjksekmm
This document provides instructions for disassembling and assembling the final drive of a 345D L excavator. It lists the required tools and parts and provides step-by-step instructions to disassemble the various components of the final drive, including removing the cover, carrier assemblies, ring gear, and other parts. It then describes the assembly process in reverse, including pressing in bearings, installing seals, and reassembling the carriers and other components.
Caterpillar cat 345 d l excavator (prefix rgg) service repair manual (rgg0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists 31 steps to fully disassemble the travel motor by removing components like the head, plates, seals, pins, brake piston and rotating group. Reassembly requires reinstalling these parts in reverse order, taking care to mark components' locations and clean all parts to prevent contaminating the hydraulic system. Proper tools are listed to facilitate disassembly and assembly.
Massey ferguson mf 24 combine engines (perkins) parts catalogue manualfjsjjekdkme
This document provides parts information for Massey Ferguson MF 24/27/29/29 XP/31/31 XP combine engines with Perkins engines. It includes detailed parts lists, part numbers, quantities and descriptions for the engine cylinder block, crankshaft, pistons, connecting rods, cylinder head and other engine components. The parts lists reference exploded diagrams of the engine systems and components.
Massey ferguson mf 7254 combine parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table augers of Massey Ferguson MF 7254/7256 combines. It includes 142 line items with part numbers, quantities, descriptions, and additional comments for components ranging from clips and bolts to knives, plates, shafts and augers for header widths ranging from 14' to 20'. Footnotes provide additional information on variations in components between different configurations.
Massey ferguson mf 7272 cerea combines parts catalogue manualhhfjksekmm
This document provides a list of parts for the knives and fingers and table augers for Massey Ferguson MF 7272/7274/7278 CEREA combines. It includes 161 items with part numbers, quantities, descriptions, and other identifying information for each part. Footnotes provide additional details on some parts that have multiple options or applications. The parts are organized into sections for the knives and fingers - freeflow system (items 1-67), and the table auger right hand and left hand (items 68-161).
Caterpillar cat 120 m motor grader (prefix r9a) service repair manual (r9a000...fjsekkdmmmse
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M Motor Grader. It includes 49 detailed illustrations and steps to disassemble the components. The assembly procedure includes required tools and references assembling the components in reverse order.
Caterpillar cat 120 m motor grader (prefix r9a) service repair manual (r9a000...fjsjjekdkme
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It describes 46 separate steps to fully disassemble these components, including removing housing components, gears, seals, bearings, and other parts. Various tools are required, and notes are provided about part ordering and weights of components being removed. The goal is to break down these drivetrain components into their smallest indivisible parts for repair or replacement.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...ufjskekdjdmw2
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 46 steps to fully disassemble these components, including removing housing components, gears, seals, and bearings. Various tools are required, and notes provide guidance on tracking shim quantities and order. Worker safety is emphasized when removing components under spring force.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...udjkdksmmd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 46 steps to fully disassemble these components, including removing housing components, gears, seals, and bearings. Various tools are required, and notes provide guidance on tracking shim quantities and order. Worker safety is emphasized when removing components under spring force.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual Instant ...udjkskdmmd
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 49 steps to fully disassemble these components, removing items like bearings, seals, gears, and housings. Reassembly follows the reverse of the disassembly process, noting to inspect parts and apply threadlock or sealant compounds during assembly. Tools required are also listed.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...ufuejkdkmdm
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 49 steps to fully disassemble these components, removing items like bearings, seals, gears, and housings. Reassembly requires following the disassembly steps in reverse order while precisely positioning shims and applying thread locking compounds or sealants as specified. Tools including pullers, wrenches, micrometers and dial indicators are required.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual Instant ...yan77xunhao
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 46 steps to fully disassemble these components, including removing housing components, gears, seals, and bearings. Various tools are required, and notes provide guidance on tracking shim quantities and order. Worker safety is emphasized when removing components under spring force.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...vvnj41316031
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 49 steps to fully disassemble these components, removing items like bearings, seals, gears, and housings. Reassembly follows the reverse of these steps, noting to inspect parts and apply threadlock or sealant compounds in some areas. Required tools include pullers, wrenches, dial indicators, and other equipment to properly separate and replace components.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...jdkksmemmd
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 49 steps to fully disassemble these components, removing items like bearings, seals, gears, and housings. Reassembly follows the reverse of these steps, noting to inspect parts and apply threadlock or sealant compounds in some areas. Required tools include pullers, wrenches, micrometers and other equipment to take the system apart and put it back together properly.
Caterpillar cat 120 m motor grader (prefix b9n) service repair manual (b9n000...fjskksmem
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 49 steps to fully disassemble these components, removing parts like bearings, seals, gears, and housings. Diagrams illustrate each step. Proper tools are listed. Assembly follows the reverse of the disassembly process, with notes on applying threadlock and bearing mount compounds during reassembly.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...gen78guozun
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 46 steps to fully disassemble these components, including removing housing components, gears, seals, and bearings. Various tools are required, and notes provide guidance on tracking shim quantities and order. Worker safety is emphasized when removing components under spring force.
Caterpillar Cat 120M Motor Grader (Prefix B9N) Service Repair Manual (B9N0000...f7usedkddmmd
This document provides disassembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It lists 46 steps to fully disassemble these components, including removing housing components, gears, seals, and bearings. Various tools are required, and notes provide guidance on tracking shim quantities and order. Worker safety is emphasized when removing components under spring force.
Caterpillar cat 120 m motor grader (prefix b9n) service repair manual (b9n000...fujsjefksekmm
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It includes 49 detailed steps to disassemble the components, requiring various tools. It notes to inspect seals and shims, and indicates weights of parts. The assembly section lists required tools and begins the process.
Caterpillar cat 120 m motor grader (prefix b9n) service repair manual (b9n000...udfjjsjekdkdmm
This document provides disassembly and assembly instructions for the rear axle, differential, and final drive of a 120M motor grader. It includes 49 detailed steps to disassemble the components, requiring various tools. The proper order of removal for shims and other parts is noted. Assembly follows the reverse order, with specifications on cleaning, applying sealants and grease, and torqueing bolts.
Caterpillar cat 120 m motor grader (prefix b9n) service repair manual (b9n000...fhsejkdkmem
The document provides step-by-step instructions to disassemble the rear axle, differential, and final drive of a 120M motor grader. It lists 42 steps to remove over 80 individual parts and components. Special tools are required to remove many parts due to their weight, with weights provided for major assemblies. Notes are included to record order and quantities of shims and other parts for reassembly. Safety precautions are mentioned for parts under spring tension.
Caterpillar cat 120 m motor grader (prefix b9n) service repair manual (b9n000...fjjskekdmem
The document provides step-by-step instructions to disassemble the rear axle, differential, and final drive of a 120M motor grader. It lists 42 steps to remove over 80 individual parts and components. Special tools are required to remove many parts due to their weight, with some components weighing over 100 lbs. Proper part labeling and order is important during disassembly to aid reassembly. Safety precautions are noted, including wearing protective equipment when removing parts under spring tension.
Caterpillar cat 160 m motor grader (prefix b9l) service repair manual (b9l000...fjjsekfxswzksmem
This document provides disassembly instructions for the rear axle, differential, and final drive of a 160M motor grader in 3 sentences:
It begins by having the technician remove the rear axle, differential, and final drive assembly. The instructions then guide the disassembly of each component, including removing bearings, seals, gears, and housings using the appropriate tools. Proper notation of shim quantities and orders is emphasized throughout the 49-step process.
Similar to Caterpillar cat 120 m motor grader (prefix r9a) service repair manual (r9a00001 and up) (17)
Massey ferguson mf 31 xp combine engines (perkins) parts catalogue manualkdidkdkkd
The document provides details on engines for Massey Ferguson MF 24/27/29/29 XP/31/31 XP combines, including Perkins A6.354.4 engines. It contains lists of engine parts with item numbers, part numbers, quantities and descriptions. Reference information is also provided for various engine components that are not serviced individually.
Massey ferguson mf 31 combine engines (perkins) parts catalogue manualkdidkdkkd
The document provides details on engines for Massey Ferguson MF 24/27/29/29 XP/31/31 XP combines, including Perkins A6.354.4 engines. It consists of multiple sections covering the engine description, cylinder block, crankshaft, pistons, connecting rods, cylinder head and their respective components listed by item number, part number, quantity and description with notes.
Massey ferguson mf 29 xp combine engines (perkins) parts catalogue manualkdidkdkkd
The document provides part numbers and descriptions for components of Massey Ferguson MF 24/27/29/29 XP/31/31 XP combine engines made by Perkins. It includes detailed lists and diagrams of engine parts such as the cylinder block, crankshaft, pistons, connecting rods, cylinder head and other internal components. Each part is numbered and specifications are provided.
Massey ferguson mf 265 tractor, 193552 (gb) parts catalogue manualkdidkdkkd
The document provides parts information for a Massey Ferguson MF 265 tractor engine. It includes 36 numbered items with corresponding part numbers, quantities, descriptions, and comments. The parts are grouped into sections for the cylinder block, cylinder head, crankshaft, pistons, timing gears, and other engine components. Measurements are provided in both inches and millimeters for some part thicknesses.
Massey ferguson mf 29 combine engines (perkins) parts catalogue manualkdidkdkkd
The document provides details on engines for Massey Ferguson MF 24/27/29/29 XP/31/31 XP combines, including Perkins A6.354.4 engines. It contains lists of engine parts with item numbers, part numbers, quantities and descriptions. Reference information and notes are also provided on various engine components.
Massey ferguson mf 375 tractor, b18008 parts catalogue manualkdidkdkkd
The document contains parts lists and descriptions for various components of a Massey Ferguson MF 375 tractor, including the engine, cylinder block, crankshaft, pistons, connecting rods, and cylinder head. It lists over 50 individual parts by number, quantity, description, and other identifying information like serial numbers. The parts are grouped into sections based on the mechanical system or component they belong to.
Massey ferguson mf 362 n tractor (japan only) parts catalogue manualkdidkdkkd
This document provides specifications and part numbers for a Massey Ferguson 362 N tractor intended for the Japanese market. It includes detailed parts lists and diagrams for the engine, cylinder block, crankshaft, pistons, cylinder head, and rocker shaft. Reference numbers are provided for ordering replacement parts.
Massey ferguson mf 390 tractor, b18008 parts catalogue manualkdidkdkkd
This document provides parts information for an MF 390 tractor engine. It includes:
1) A list of engine parts with part numbers and descriptions
2) Serial number ranges and other specifications for some parts
3) Notes on part replacements and specifications for different countries/models
Massey ferguson mf 398 tractor, b18008 parts catalogue manualkdidkdkkd
This document provides a parts list for a Massey Ferguson 398 tractor engine. It includes 33 items related to the cylinder block, including the cylinder block itself, bearings, liners, plugs, bushes, gaskets, and housings. Each part is listed with its part number, quantity, description, and any relevant comments.
Massey ferguson mf 27 combine engines (perkins) parts catalogue manualkdidkdkkd
The document provides details on Massey Ferguson combine engines, including Perkins A6.354.4 engines used in MF 24, 27, 29, 29 XP, 31, and 31 XP combines. It lists over 100 individual parts that make up the engine, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and other components. Each part is given a reference number, part number, quantity used, description, and any relevant comments.
Massey ferguson mf 24 combine parts catalogue manualkdidkdkkd
This document provides the parts list and diagrams for a Massey Ferguson MF 24 combine with the model number 819723. It includes detailed lists and diagrams of parts for the straw divider, knives and fingers, wearing plates and stone stop, counter shaft, guarding, and feeder drum systems. Over 50 individual parts are specified by part number, quantity, description and placement in the various systems.
Massey ferguson mf 24 combine engines (perkins) parts catalogue manualkdidkdkkd
The document provides details on engines for Massey Ferguson MF 24/27/29/29 XP/31/31 XP combine harvesters, including part numbers, quantities and descriptions of engine components. It lists over 100 individual parts that make up engines, such as the cylinder block, crankshaft, pistons, connecting rods, cylinder head and their corresponding part numbers.
This document provides specifications and dimensions for 'NEF' diesel engines including 3 and 4 cylinder configurations. It describes the lubrication, cooling and turbocharging systems. Dimensions are given for engine blocks, crankshafts, cylinder heads, valves, camshafts and other components. Torque settings are also provided for many engine fasteners.
This document provides specifications and dimensions for 'NEF' diesel engines, including 3 and 4 cylinder models. It describes the engine components such as the injection pumps, lubrication system, cooling system, turbocharger, dimensions, and torque settings. The lubrication system uses a lobe oil pump to circulate oil through the crankshaft, camshaft, cylinder head and oil cooler. The cooling system has a water pump, radiator, thermostat and oil cooler. Turbocharged models include an air filter and turbocharger. Dimensions are provided for piston rings, bearings, valves, camshafts and other components. Torque settings are listed for engine attachment points.
This document provides specifications and dimensions for 'NEF' diesel engines, including 3 and 4 cylinder models. It describes the engine components such as the injection pumps, lubrication system, cooling system, turbocharger, dimensions, and torque settings. The lubrication system uses a lobe oil pump to circulate oil through the crankshaft, camshaft, cylinder head and oil cooler. The cooling system has a water pump, radiator, thermostat and oil cooler. Turbocharged models include an air filter and turbocharger. Dimensions are provided for pistons, cylinders, bearings, valves and other components. Torque settings are listed for various engine fasteners.
Claas nectis ve 237 2+4 wd (type t14) tractor service repair manualkdidkdkkd
1) The document provides identification information for injector pumps used on various tractor models, including the engine, number of cylinders, injector pump model, and injection sequence.
2) It describes the components and operation of the fuel injection system, including the fuel tank, lines, filter, pump, injectors and electrical components like sensors and solenoids.
3) Checks and adjustments are described for components like the accelerator control, injector pump timing, injectors, supply pressure and removal/refitting of the fuel filter. Torque settings and identification information is also provided.
Claas nectis ve 227 2+4 wd (type t14) tractor service repair manualkdidkdkkd
1. The document provides identification information for injector pumps and injectors used in various tractor models. It identifies the manufacturer, models, and specifications of the injector pumps and injectors.
2. The fuel injection system is described including the fuel tank, lines, filters, pump, and injectors. The operating principle and components of the injector pump are explained along with diagrams.
3. Torque settings and adjustment procedures are provided for the accelerator control and injector pump internal settings.
Claas nectis ve 217 2+4 wd (type t14) tractor service repair manualkdidkdkkd
1. The document provides identification information for injector pumps and injectors used in various tractor models. It identifies the manufacturer, models, and specifications of the injector pumps and injectors.
2. The document describes the components and operation of the fuel injection system, including the fuel tank, lines, filters, pump, injector pump, and injectors. It provides diagrams and explanations of how fuel is delivered to the injectors.
3. The document provides instructions for adjusting the accelerator control and setting the internal timing of the injector pump when removed from the engine. It describes the proper alignment and measurements needed for adjusting the pump timing.
Claas nectis f 267 2+4 wd (type t16) tractor service repair manualkdidkdkkd
This document provides specifications for Iveco NEF diesel engines, including 3 and 4 cylinder atmospheric and turbocharged models. It describes the engines' lubrication, cooling, and turbocharging systems. Dimensions are provided for pistons, crankshafts, cylinder heads, valves, and other components. Clearances and tolerances are indicated. The engines have mechanical injection pumps and use a pressurized lubrication system with an oil pump and filter. The closed-loop cooling system includes a water pump, radiator, and thermostat. Turbocharged versions get air from a compressor driven by the exhaust system.
Claas nectis f 257 2+4 wd (type t16) tractor service repair manualkdidkdkkd
This document provides specifications for Iveco NEF diesel engines, including 3 and 4 cylinder atmospheric and turbocharged models. It describes the engines' lubrication, cooling, and turbocharging systems. Dimensions are provided for pistons, crankshafts, cylinder heads, valves, and other components. Clearances and tolerances are indicated. The engines have mechanical injection pumps and use a pressurized lubrication system with an oil pump and filter. The closed-loop cooling system includes a water pump, radiator, and thermostat. Turbocharged versions get air from a compressor driven by the exhaust system.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 120M MOTOR GRADER R9A
Configuration: 120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
12M and 120M Motor Graders Power Train
Media Number -KENR6419-08 Publication Date -01/05/2017 Date Updated -15/05/2017
i03096382
Rear Axle, Differential and Final Drive - Disassemble
SMCS - 3258-015; 3278-015; 3282-015-RE; 4050-015; 4068-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 4
B 140-7742 Sleeve 2
C 1U-9200 Lever Puller Hoist 1
D 154-6182 Forcing Bolt 3
E 138-7574 Link Bracket 2
F
8B-7551 Bearing Puller Gp 1
1P-5546 Crossarm 1
3H-0465 Push-Puller Plate 2
5F-7366 Forcing Screw 1
G 292-4949 Socket Wrench As 1
H 154-6183 Forcing Bolt 3
J 1U-6405 Three Jaw Puller 1
Start By:
a. Remove the rear axle, differential, and final drive. Refer to Disassembly and Assembly,
"Rear Axle, Differential, and Final Drive - Remove".
1/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.
Illustration 1 g01413868
1. Use Tooling (A), Tooling (B), and two suitable lifting devices in order to position rear axle,
differential, and final drive (1) onto suitable blocking. The weight of rear axle, differential,
and final drive (1) is approximately 1089 kg (2400 lb).
Illustration 2 g01418559
2. Remove bolts (3), retainer (4), shims (5), sprocket (2), and sprocket (6).
2/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Note: Note the quantity and the order of shims (5).
Illustration 3 g01414357
3. Remove bearing cone (7).
Illustration 4 g01412778
4. Attach Tooling (A), Tooling (C), and two suitable lifting devices onto final drive housing
(8). The weight of final drive housing (8) is approximately 181 kg (400 lb). Remove nuts
(9).
5. Use Tooling (D) in order to remove final drive housing (8).
3/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 5 g01419912
6. Remove bolts (10). Remove retainer (11).
Illustration 6 g01352280
7. Remove shims (12). Use Tooling (A) and a suitable lifting device in order to remove
housing (13). The weight of housing (13) is approximately 57 kg (126 lb).
Note: Note the quantity and the order of shims (12).
Illustration 7 g01352292
4/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. 8. Remove thrust washer (14). Remove wear sleeves (15).
Illustration 8 g01352299
9. Turn over housing (13). Remove lip seal (16).
Illustration 9 g01414353
10. Remove bearing cup (17). Remove thrust washer (18).
Illustration 10 g01352320
11. Remove lip seal (19). Remove bearing cup (20).
5/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 11 g01419983
12. Use Tooling (E) in order to remove carrier assembly (21) and drive shaft (22). The weight
of carrier assembly (21) and drive shaft (22) is approximately 58 kg (128 lb).
Illustration 12 g01419985
13. Use Tooling (F) in order to remove bearing cone (23).
Illustration 13 g01352339
14. Remove retaining ring (24) in order to remove axle shaft (22) from carrier assembly (21).
6/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 14 g01352406
15. Remove bolts (25) and retainer (26). Remove pin (27). Remove gear (28). Remove thrust
washers (29) and bearings (30). Repeat this step for the remaining planetary gears.
Illustration 15 g01352384
16. Remove axle shaft assembly (31).
7/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 16 g01352402
17. Remove retaining ring (32) in order to remove gear (33) from axle shaft (34).
Illustration 17 g01352438
18. Use Tooling (D) in order to separate ring gear (35) from the intermediate housing.
Illustration 18 g01352445
19. Use Tooling (B) and a suitable lifting device in order to remove ring gear (35). The weight
of ring gear (35) is approximately 23 kg (51 lb).
20. Repeat Step 2 through Step 19 for the opposite side.
8/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 19 g01353587
21. Position differential housing (36) with intermediate housing (37) upward.
Illustration 20 g01419994
22. Attach a suitable lifting device onto pinion (38). Use Tooling (H) in order to separate pinion
(38) from the center housing. Remove bolts (39) in order to remove pinion (38). The weight
of pinion (38) is approximately 47 kg (104 lb).
Illustration 21 g01353021
23. Remove shims (40). Remove O-ring seal (41).
Note: Note the order and the quantity of shims (40).
9/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 22 g01353002
24. Remove bolt (42). Remove retainer (43). Remove yoke (44). Remove guard (45).
Illustration 23 g01353512
25. Remove shims (46). Remove lip seal (47).
Note: Note the order and the quantity of shims (46).
10/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 24 g01353570
26. Remove pinion (48). Remove bearing cone (49). Remove bearing cup (50). Remove bearing
cone (51). Remove bearing cup (52).
Illustration 25 g01420086
27. Remove bolts (53).
Illustration 26 g01419995
Typical Example
28. Use Tooling (G) in order to remove nut assembly (54).
11/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 27 g01420082
29. Remove bolts (55). Remove bolts (56).
Illustration 28 g01419996
30. Use Tooling (H) in order to separate intermediate housing (37) from differential housing
(36).
Illustration 29 g01420124
31. Use Tooling (E) in order to remove intermediate housing (37). The weight of intermediate
housing (37) is approximately 31 kg (68 lb).
12/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 30 g01352893
32. Remove shims (57).
Illustration 31 g01352898
33. Use Tooling (A) in order to remove bearing assembly (58) and differential (59). The weight
of bearing assembly (58) and differential (59) is approximately 91 kg (200 lb).
Illustration 32 g01352982
34. Remove bolts (60). Remove shroud (61).
Illustration 33 g01419997
13/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. 35. Use Tooling (F) in order to remove bearing assembly (62).
Illustration 34 g01354900
36. Remove bearing cone (63). Remove bearing cups (64).
Illustration 35 g01420000
37. Use Tooling (J) in order to remove spacer (65) and bearing cone (66).
Note: This step is a destructive procedure. Replace bearing cone (66).
Illustration 36 g01353751
14/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. 38. Remove retaining ring (67). Remove bearing race (68). Remove O-ring seals (69). Remove
thrust ring (70).
Illustration 37 g01353760
Typical Example
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
39. Remove bolts (71). Remove case (72).
Illustration 38 g01353766
40. Remove thrust washer (73). Remove plates (74) and discs (75). Remove springs (76).
Note: Note the quantity and the order of plates (74) and discs (75).
15/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 39 g01353940
41. Use two people in order to remove housing (77). The weight of housing (77) is
approximately 23 kg (50 lb).
Illustration 40 g01353944
42. Remove differential gear (78).
Illustration 41 g01353945
43. Remove spider assembly (79).
16/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 42 g01353954
44. Remove thrust washer (80), pinion gear (81), and bearing sleeve (82) from spider (83).
Repeat this step for the remaining pinion gears (81).
Illustration 43 g01353965
45. Remove differential gear (84). Remove thrust washer (85).
Illustration 44 g01353970
46. Use two people in order to turn over housing (86) and bevel gear (87). Remove bolts (88).
The weight of housing (86) and bevel gear (87) is approximately 40 kg (88 lb). Remove
bolts (88). Use two people in order to remove housing (86) from bevel gear (87). The
17/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. weight of housing (86) is approximately 23 kg (50 lb). The weight of bevel gear (85) is
approximately 17 kg (38 lb).
Illustration 45 g01355203
47. Remove bearing assembly (89). Remove piston (90).
Illustration 46 g01355208
48. Remove thrust race (91), thrust bearing (92), and thrust race (93) from piston (90).
Illustration 47 g01355211
49. Remove seals (94) from piston (90).
18/19
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SE...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 120M MOTOR GRADER R9A
Configuration: 120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
12M and 120M Motor Graders Power Train
Media Number -KENR6419-08 Publication Date -01/05/2017 Date Updated -15/05/2017
i07285127
Rear Axle, Differential and Final Drive - Assemble
SMCS - 3258-016; 3278-016; 3282-016-RE; 4050-016; 4068-016
Assembly Procedure
Table 1
Required Tools
Tool
Part
Number
Part Description Qty
A 439-3940 Link Bracket 4
B 140-7742 Sleeve 2
C 386-6031 Lever Puller Hoist 1
E 143-3939 Link Bracket 2
G 292-4949 Socket Wrench As 1
H 154-6183 Forcing Bolt 2
K 4C-4030 Thread Lock Compound 1
L 1U-8846 Gasket Sealant 1
M
6V-2012 Depth Micrometer 1
367-9109 Caliper(1)
1
N
8T-5096 Dial Indicator Gp 1
301-3405 Gauge 1
P 8T-4140 Bolt 4
R 7M-7456 Bearing Mount Compound 1
1/27
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. S - Cat Advance 3Moly Grease or Dow Corning Molykote BR2 -
Plus
1
T 8T-5096 Dial Indicator Gp 1
(1)
For use with three bolt retainers
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals, gaskets, and lip seals. Replace O-ring seals, gaskets, and lip seals
that are worn or damaged.
Note: Lubricate O-ring seals and lip seals with the lubricant that is being sealed.
Illustration 1 g03831520
1. Install seals (94) onto piston (90).
Illustration 2 g03831488
2/27
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Note: Grease is used to hold thrust race (93) and thrust bearing (92) in place during
assembly.
2. Apply a liberal amount of grease to thrust race (93) and to thrust bearing (92). Install thrust
race (93) and thrust bearing (92) onto piston (90).
Illustration 3 g01355203
3. Install piston (90). Lower the temperature of bearing assembly (89). Install bearing
assembly (89).
Illustration 4 g01353970
4. Use two people to install housing (86) onto bevel gear (87). The weight of housing (86) is
approximately 41 kg (90 lb). Install bolts (88). Tighten bolts (88) to a torque of
300 ± 40 N·m (221 ± 30 lb ft).
5. Use two people to turn over bevel gear (87) and housing (86). The combined weight of
bevel gear (87) and housing (86) is approximately 59 kg (130 lb).
3/27
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 5 g01353965
6. Install thrust washer (85). Install differential gear (84).
Note: Install thrust washer (85) with the groove side against gear (84).
Illustration 6 g01353954
7. Install bearing sleeve (82), pinion gear (81), and thrust washer (80) onto spider (83). Repeat
this step for the remaining pinion gears (81).
Illustration 7 g01353945
8. Install spider assembly (79).
4/27
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Illustration 8 g01353944
9. Install differential gear (78).
Illustration 9 g01353940
10. Install housing (77).
Note: Ensure that the notches on the housings are aligned.
Illustration 10 g01353766
5/27
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. 11. Install plates (74) and discs (75). Install thrust washer (73). Install springs (76).
Note: Lubricate the discs with the lubricant that is being sealed.
Note: Install thrust washer (73) with the groove side against the gear.
Illustration 11 g01353760
Typical Example
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Note: Determine bolt size before torquing bolts (71).
12. Install case (72). Install bolts (71). Tighten M16 bolts (71) to a torque of 300 ± 40 N·m
(220 ± 30 lb ft). Tighten M12 bolts (71) to a torque of 120 ± 20 N·m (90 ± 15 ft)
6/27
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. Illustration 12 g03831494
Note: Grease is used to hold thrust race (91) in place during assembly.
13. Install thrust ring (70). Apply a liberal amount of grease to thrust race (91). Install thrust
race (91) onto thrust ring (70). Install O-ring seals (69). Raise the temperature of bearing
race (68). Install bearing race (68). Install retaining ring (67).
Illustration 13 g01354921
14. Raise the temperature of bearing cone (66). Install bearing cone (66) and spacer (65).
Illustration 14 g06240309
15. Use a suitable press to install bearing assembly (55). Install shroud (58). Apply Tooling (K)
to the threads of bolts (57) and install bolts (57). Tighten bolts (57) to a torque of
28 ± 7 N·m (21 ± 5 lb ft).
7/27
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine(SEBP...
2020/5/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...