This document is a service manual for the WX148 Wheeled Excavator. It contains information on servicing and repairing components of the excavator including the engine, transmission, front and rear axles, brakes, hydraulic systems, frames, ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers, buckets, dozer blade, platform, cab and decals. The manual stresses that repair and maintenance work should only be performed by qualified dealership personnel using the proper instructions and tools.
New holland we150 b wheeled excavator service repair manualujfjdkkmsme
This document is a service manual for the WE150B Wheeled Excavator that contains information on engine systems, transmission, axles, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, booms, buckets, dozer blades, cab components, and decals. The manual provides repair and maintenance instructions for qualified dealership personnel and is intended to ensure proper servicing of the excavator.
New holland we210 b wheeled excavator service repair manualujfjdkkmsme
This document is a service manual for the WE210B Wheeled Excavator that provides information on servicing various components of the excavator, including the engine, transmission, axles, brakes, hydraulics, electrical systems, cab, and attachments. It contains sections covering maintenance and repair procedures for these different systems. The manual is intended for use by qualified dealership personnel when servicing the excavator.
New holland t5.100 electro command tractor service repair manualoekdmjkemme
This service manual provides maintenance and repair instructions for T5.100, T5.110, and T5.120 Electro Command tractors. It includes sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader, accessories, and the platform, cab, bodywork and decals. Safety precautions are provided throughout.
New holland fr600 tier 3 forage harvester service repair manual [5803 ]udjjsjekkmme
This document provides a service manual for New Holland FR450, FR500, FR600, FR700, and FR850 forage harvesters, replacing an earlier part number. It includes sections covering the engine, transmission, hydraulic and electrical systems, attachments, and other components.
New holland we150 b wheeled excavator service repair manualfujsjefkksekmme
The document provides the service manual for a WE150B wheeled excavator, outlining maintenance procedures for the engine, transmission, axles, brakes, hydraulic and electrical systems, and other components; it includes exploded diagrams and step-by-step instructions for replacing parts like air filters, fuel filters, and transmission components.
New holland we210 b wheeled excavator service repair manualuudfjjjskkemmd
This document is a service manual for the WE210B Wheeled Excavator that provides information on servicing various components of the excavator, including the engine, transmission, axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, booms, buckets, dozer blade, and bodywork. It contains sections covering maintenance and repair procedures for these different systems and components. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
New holland we210 b wheeled excavator service repair manualfujsjefkksekmme
This document is a service manual for the WE210B Wheeled Excavator that provides information on servicing various components of the excavator, including the engine, transmission, axles, brakes, hydraulics, electrical systems, cab, and attachments. It contains sections covering maintenance and repair procedures for these different systems. The manual is intended for use by qualified dealership personnel when servicing the WE210B excavator.
New holland we210 b wheeled excavator service repair manualujjfdjkjskkmdm
This document is a service manual for the WE210B Wheeled Excavator that provides information on servicing various components of the excavator, including the engine, transmission, axles, brakes, hydraulics, electrical systems, cab, and attachments. It contains sections covering maintenance and repair procedures for these different systems. The manual is intended for use by qualified dealership personnel when servicing the WE210B excavator.
New holland we150 b wheeled excavator service repair manualujfjdkkmsme
This document is a service manual for the WE150B Wheeled Excavator that contains information on engine systems, transmission, axles, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, booms, buckets, dozer blades, cab components, and decals. The manual provides repair and maintenance instructions for qualified dealership personnel and is intended to ensure proper servicing of the excavator.
New holland we210 b wheeled excavator service repair manualujfjdkkmsme
This document is a service manual for the WE210B Wheeled Excavator that provides information on servicing various components of the excavator, including the engine, transmission, axles, brakes, hydraulics, electrical systems, cab, and attachments. It contains sections covering maintenance and repair procedures for these different systems. The manual is intended for use by qualified dealership personnel when servicing the excavator.
New holland t5.100 electro command tractor service repair manualoekdmjkemme
This service manual provides maintenance and repair instructions for T5.100, T5.110, and T5.120 Electro Command tractors. It includes sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader, accessories, and the platform, cab, bodywork and decals. Safety precautions are provided throughout.
New holland fr600 tier 3 forage harvester service repair manual [5803 ]udjjsjekkmme
This document provides a service manual for New Holland FR450, FR500, FR600, FR700, and FR850 forage harvesters, replacing an earlier part number. It includes sections covering the engine, transmission, hydraulic and electrical systems, attachments, and other components.
New holland we150 b wheeled excavator service repair manualfujsjefkksekmme
The document provides the service manual for a WE150B wheeled excavator, outlining maintenance procedures for the engine, transmission, axles, brakes, hydraulic and electrical systems, and other components; it includes exploded diagrams and step-by-step instructions for replacing parts like air filters, fuel filters, and transmission components.
New holland we210 b wheeled excavator service repair manualuudfjjjskkemmd
This document is a service manual for the WE210B Wheeled Excavator that provides information on servicing various components of the excavator, including the engine, transmission, axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, booms, buckets, dozer blade, and bodywork. It contains sections covering maintenance and repair procedures for these different systems and components. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
New holland we210 b wheeled excavator service repair manualfujsjefkksekmme
This document is a service manual for the WE210B Wheeled Excavator that provides information on servicing various components of the excavator, including the engine, transmission, axles, brakes, hydraulics, electrical systems, cab, and attachments. It contains sections covering maintenance and repair procedures for these different systems. The manual is intended for use by qualified dealership personnel when servicing the WE210B excavator.
New holland we210 b wheeled excavator service repair manualujjfdjkjskkmdm
This document is a service manual for the WE210B Wheeled Excavator that provides information on servicing various components of the excavator, including the engine, transmission, axles, brakes, hydraulics, electrical systems, cab, and attachments. It contains sections covering maintenance and repair procedures for these different systems. The manual is intended for use by qualified dealership personnel when servicing the WE210B excavator.
Case ih magnum 220 powershift transmission (pst) tier 4 b tractor service rep...fujsefkskemm
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, hoses, and removing mounting hardware. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and various brackets supporting engine components. Personal protective equipment and proper lifting equipment are emphasized when removing heavy components.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...fjjsekkksmeik
This document is a service manual for Case IH Magnum tractors with Powershift Transmissions (PST). It contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
Case ih magnum 220 powershift transmission (pst) tier 4 b tractor service rep...ufjjskekfmmse
This document is a service manual for Case IH Magnum tractors with Powershift Transmissions (PST). It contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
Case ih magnum 220 powershift transmission (pst) tier 4 b tractor service rep...fujsekfksmemer
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, fluid lines, removing mounting brackets and lifting the engine out. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and hood support brackets. Safety precautions are provided throughout regarding proper lifting, pressure relief, and electrical/fluid disconnection.
Case ih magnum 220 powershift transmission (pst) tier 4 b tractor service rep...fujsjekfkkseme
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, fluid lines, removing mounting brackets and lifting the engine out. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and hood support brackets. Safety precautions are provided throughout.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...fujsjekfkkseme
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, hoses, and removing components like the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, and engine mounting brackets. Safety precautions are provided and components are to be properly supported during removal to prevent injury or damage.
Case ih magnum 200 powershift transmission (pst) tier 4 b tractor service rep...ufjsjekskem
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, hoses, and removing mounting hardware. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and various brackets supporting engine systems. Safety precautions are provided throughout for completing the work.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...dufjsfjkskekem
This document is a service manual for Case IH Magnum tractors with Powershift Transmissions (PST). It contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...fhsjejfksemm
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, fluid lines, removing mounting brackets and lifting the engine out. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and hood support brackets. Safety precautions are provided throughout regarding proper lifting, disconnecting lines, and hazards.
Case ih magnum 200 powershift transmission (pst) tier 4 b tractor service rep...fujsefkskemm
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, fluid lines, removing mounting brackets and lifting the engine out. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and hood support brackets. Safety precautions are provided throughout relating to proper lifting, pressure relief, and electrical/fluid disconnection.
Case ih magnum 200 powershift transmission (pst) tier 4 b tractor service rep...fujsekksmem
This document is a service manual for Case IH Magnum tractors with Powershift Transmissions (PST). It contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...ufjjsjefkkekmme
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, fluid lines, removing mounting brackets and lifting the engine out. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and hood support brackets. Safety precautions are provided throughout relating to proper lifting, pressure relief, and electrical/fluid disconnection.
Case ih magnum 200 powershift transmission (pst) tier 4 b tractor service rep...fujsjekfkkseme
This document is a service manual for Case IH Magnum tractors with Powershift Transmissions (PST). It contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
Case ih magnum 220 continuously variable transmission (cvt) tier 4 b tractor ...fujsjekfkkseme
This document provides instructions for removing the engine from Case IH Magnum tractors. The steps include disconnecting electrical connections and fluid lines, removing components attached to the engine like the air cleaner and diesel exhaust fluid dosing module, cutting wire ties, and removing mounting hardware. Proper lifting equipment is required to remove heavy components such as the diesel exhaust catalyst. Following the provided removal procedure helps ensure the engine can be safely disconnected from the tractor.
Case ih magnum 200 continuously variable transmission (cvt) tier 4 b tractor ...ufjjskekfmmse
This document provides instructions for removing the engine from Case IH Magnum tractors. The steps include disconnecting electrical connections and fluid lines, removing components attached to the engine like the air cleaner and diesel exhaust fluid dosing module, cutting tie straps on harnesses, and removing mounting brackets and bolts to separate the engine from the vehicle. Precautions are provided to properly support and lift heavy engine components. The removal process prepares the engine for maintenance or replacement.
Case ih magnum 180 continuously variable transmission (cvt) tier 4 b tractor ...ufjjskekfmmse
This service manual provides information on servicing the Case IH Magnum 180, 200, 220, and 240 tractors with continuously variable transmissions. The manual covers the engine, power coupling, transmission, four-wheel drive system, front and rear axles, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, electrical systems, and exterior components. Technicians are advised to only perform repair and maintenance listed in the manual using the specified tools and procedures.
Case ih magnum 240 continuously variable transmission (cvt) tier 4 b tractor ...fujsjekfkkseme
This document provides instructions for removing the engine from Case IH Magnum tractors. The steps include disconnecting electrical connections and fluid lines, removing components attached to the engine like the air cleaner and diesel exhaust fluid dosing module, cutting wire ties, and removing mounting hardware. Proper lifting equipment is required to remove heavy components like the diesel exhaust catalyst.
Case ih magnum 180 continuously variable transmission (cvt) tier 4 b tractor ...fujsekfksmemer
This service manual provides information on servicing the Case IH Magnum 180, 200, 220, and 240 tractors with continuously variable transmissions. The manual covers the engine, power coupling, transmission, four-wheel drive system, front and rear axles, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, electrical systems, and exterior components. Technicians are advised to only perform repairs using qualified dealership personnel and following the instructions carefully.
Case ih magnum 240 continuously variable transmission (cvt) tier 4 b tractor ...fujsefkskemm
This service manual provides information on servicing the Case IH Magnum 180, 200, 220, and 240 tractors with continuously variable transmissions. The manual covers the engine, power coupling, transmission, four-wheel drive system, front and rear axles, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, electrical systems, and exterior components. Technicians are advised to only perform repair and maintenance listed in the manual using the specified tools and procedures.
Case ih magnum 220 continuously variable transmission (cvt) tier 4 b tractor ...fujsefkskemm
This document provides instructions for removing the engine from Case IH Magnum tractors. The steps include disconnecting electrical connections and fluid lines, removing components attached to the engine like the air cleaner and diesel exhaust fluid dosing module, cutting tie straps on harnesses, and removing mounting brackets and bolts to separate the engine from the vehicle. Precautions are provided to properly support and lift heavy engine components. The removal process prepares the engine for maintenance or replacement.
Steyr f4 hfe613x tier 4b (final) engine service repair manualfdjjjsekkskemm
This document contains a service manual for Tier 4B (final) engines. It includes sections on the engine, electrical systems, and safety information. The manual provides maintenance and repair instructions for technicians, with the goal of ensuring personal safety and preventing damage to equipment. It lists many engine part numbers and cautions technicians to only perform work according to the procedures in the manual using recommended tools.
Steyr f4 hfe613w tier 4b (final) engine service repair manualfdjjjsekkskemm
This document is a service manual for Tier 4B (final) engines. It provides part numbers and model numbers for various engine components. The manual contains sections on the engine, electrical systems, and basic shop and assembly instructions. Safety rules and notices are also included at the beginning.
More Related Content
Similar to Case wx148 wheeled excavator service repair manual
Case ih magnum 220 powershift transmission (pst) tier 4 b tractor service rep...fujsefkskemm
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, hoses, and removing mounting hardware. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and various brackets supporting engine components. Personal protective equipment and proper lifting equipment are emphasized when removing heavy components.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...fjjsekkksmeik
This document is a service manual for Case IH Magnum tractors with Powershift Transmissions (PST). It contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
Case ih magnum 220 powershift transmission (pst) tier 4 b tractor service rep...ufjjskekfmmse
This document is a service manual for Case IH Magnum tractors with Powershift Transmissions (PST). It contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
Case ih magnum 220 powershift transmission (pst) tier 4 b tractor service rep...fujsekfksmemer
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, fluid lines, removing mounting brackets and lifting the engine out. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and hood support brackets. Safety precautions are provided throughout regarding proper lifting, pressure relief, and electrical/fluid disconnection.
Case ih magnum 220 powershift transmission (pst) tier 4 b tractor service rep...fujsjekfkkseme
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, fluid lines, removing mounting brackets and lifting the engine out. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and hood support brackets. Safety precautions are provided throughout.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...fujsjekfkkseme
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, hoses, and removing components like the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, and engine mounting brackets. Safety precautions are provided and components are to be properly supported during removal to prevent injury or damage.
Case ih magnum 200 powershift transmission (pst) tier 4 b tractor service rep...ufjsjekskem
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, hoses, and removing mounting hardware. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and various brackets supporting engine systems. Safety precautions are provided throughout for completing the work.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...dufjsfjkskekem
This document is a service manual for Case IH Magnum tractors with Powershift Transmissions (PST). It contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...fhsjejfksemm
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, fluid lines, removing mounting brackets and lifting the engine out. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and hood support brackets. Safety precautions are provided throughout regarding proper lifting, disconnecting lines, and hazards.
Case ih magnum 200 powershift transmission (pst) tier 4 b tractor service rep...fujsefkskemm
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, fluid lines, removing mounting brackets and lifting the engine out. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and hood support brackets. Safety precautions are provided throughout relating to proper lifting, pressure relief, and electrical/fluid disconnection.
Case ih magnum 200 powershift transmission (pst) tier 4 b tractor service rep...fujsekksmem
This document is a service manual for Case IH Magnum tractors with Powershift Transmissions (PST). It contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...ufjjsjefkkekmme
The document provides instructions for removing the engine from a Case IH Magnum tractor, including disconnecting electrical connections, fluid lines, removing mounting brackets and lifting the engine out. Specific components that must be removed include the air cleaner, diesel exhaust fluid dosing module, diesel exhaust catalyst, driveshaft, and hood support brackets. Safety precautions are provided throughout relating to proper lifting, pressure relief, and electrical/fluid disconnection.
Case ih magnum 200 powershift transmission (pst) tier 4 b tractor service rep...fujsjekfkkseme
This document is a service manual for Case IH Magnum tractors with Powershift Transmissions (PST). It contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the instructions provided using special tools whenever possible.
Case ih magnum 220 continuously variable transmission (cvt) tier 4 b tractor ...fujsjekfkkseme
This document provides instructions for removing the engine from Case IH Magnum tractors. The steps include disconnecting electrical connections and fluid lines, removing components attached to the engine like the air cleaner and diesel exhaust fluid dosing module, cutting wire ties, and removing mounting hardware. Proper lifting equipment is required to remove heavy components such as the diesel exhaust catalyst. Following the provided removal procedure helps ensure the engine can be safely disconnected from the tractor.
Case ih magnum 200 continuously variable transmission (cvt) tier 4 b tractor ...ufjjskekfmmse
This document provides instructions for removing the engine from Case IH Magnum tractors. The steps include disconnecting electrical connections and fluid lines, removing components attached to the engine like the air cleaner and diesel exhaust fluid dosing module, cutting tie straps on harnesses, and removing mounting brackets and bolts to separate the engine from the vehicle. Precautions are provided to properly support and lift heavy engine components. The removal process prepares the engine for maintenance or replacement.
Case ih magnum 180 continuously variable transmission (cvt) tier 4 b tractor ...ufjjskekfmmse
This service manual provides information on servicing the Case IH Magnum 180, 200, 220, and 240 tractors with continuously variable transmissions. The manual covers the engine, power coupling, transmission, four-wheel drive system, front and rear axles, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, electrical systems, and exterior components. Technicians are advised to only perform repair and maintenance listed in the manual using the specified tools and procedures.
Case ih magnum 240 continuously variable transmission (cvt) tier 4 b tractor ...fujsjekfkkseme
This document provides instructions for removing the engine from Case IH Magnum tractors. The steps include disconnecting electrical connections and fluid lines, removing components attached to the engine like the air cleaner and diesel exhaust fluid dosing module, cutting wire ties, and removing mounting hardware. Proper lifting equipment is required to remove heavy components like the diesel exhaust catalyst.
Case ih magnum 180 continuously variable transmission (cvt) tier 4 b tractor ...fujsekfksmemer
This service manual provides information on servicing the Case IH Magnum 180, 200, 220, and 240 tractors with continuously variable transmissions. The manual covers the engine, power coupling, transmission, four-wheel drive system, front and rear axles, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, electrical systems, and exterior components. Technicians are advised to only perform repairs using qualified dealership personnel and following the instructions carefully.
Case ih magnum 240 continuously variable transmission (cvt) tier 4 b tractor ...fujsefkskemm
This service manual provides information on servicing the Case IH Magnum 180, 200, 220, and 240 tractors with continuously variable transmissions. The manual covers the engine, power coupling, transmission, four-wheel drive system, front and rear axles, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, cab climate control, electrical systems, and exterior components. Technicians are advised to only perform repair and maintenance listed in the manual using the specified tools and procedures.
Case ih magnum 220 continuously variable transmission (cvt) tier 4 b tractor ...fujsefkskemm
This document provides instructions for removing the engine from Case IH Magnum tractors. The steps include disconnecting electrical connections and fluid lines, removing components attached to the engine like the air cleaner and diesel exhaust fluid dosing module, cutting tie straps on harnesses, and removing mounting brackets and bolts to separate the engine from the vehicle. Precautions are provided to properly support and lift heavy engine components. The removal process prepares the engine for maintenance or replacement.
Similar to Case wx148 wheeled excavator service repair manual (20)
Steyr f4 hfe613x tier 4b (final) engine service repair manualfdjjjsekkskemm
This document contains a service manual for Tier 4B (final) engines. It includes sections on the engine, electrical systems, and safety information. The manual provides maintenance and repair instructions for technicians, with the goal of ensuring personal safety and preventing damage to equipment. It lists many engine part numbers and cautions technicians to only perform work according to the procedures in the manual using recommended tools.
Steyr f4 hfe613w tier 4b (final) engine service repair manualfdjjjsekkskemm
This document is a service manual for Tier 4B (final) engines. It provides part numbers and model numbers for various engine components. The manual contains sections on the engine, electrical systems, and basic shop and assembly instructions. Safety rules and notices are also included at the beginning.
Steyr f4 hfe413p tier 4b (final) engine service repair manualfdjjjsekkskemm
This document is a service manual for Tier 4B (final) engines. It provides part numbers and model numbers for various engine components. The manual contains sections on the engine, electrical systems, and basic instructions for shop and assembly work. Safety rules and cautions for working on equipment are also provided.
Steyr f4 hfe413n tier 4b (final) engine service repair manualfdjjjsekkskemm
This document contains a service manual for Tier 4B (final) engines. It includes sections on the engine, electrical systems, and safety information. The manual provides maintenance and repair instructions for technicians, with the goal of ensuring personal safety and preventing damage to equipment. It lists many engine part numbers and cautions technicians to only perform work according to the procedures in the manual using recommended tools.
Steyr f4 dfe613k tier 4b (final) engine service repair manualfdjjjsekkskemm
This document is a service manual for Tier 4B (final) engines. It provides part numbers and model numbers for various engine components. The manual contains sections on the engine, electrical systems, and basic instructions for shop and assembly work. Safety rules and notices are also provided at the beginning.
Steyr f4 dfe613j tier 4b (final) engine service repair manualfdjjjsekkskemm
This document is a service manual for Tier 4B (final) engines. It provides model numbers for engines covered and copyright information. The manual contains sections on the engine, electrical systems, and introduction/safety information. Model numbers and part numbers are listed for components covered in the manual.
Steyr f4 de9484 engine service repair manualfdjjjsekkskemm
This document provides service manual information for various engine models. It includes general specifications for the F4HE engines such as displacement, valve timing details, fuel injection specifications, lubrication specifications, and clearance data for cylinder blocks, crankshafts, pistons, and piston rings. Torque specifications are also provided for some models. The document appears to be the introductory section of a service manual.
Steyr f4 ce9684 engine service repair manualfdjjjsekkskemm
This document provides service information for engine models F4CE9484, F4CE9684, F4DE9484, F4DE9684, F4DE9687, F4GE9484, F4GE9684, F4HE9484, and F4HE9684, including specifications, component details, removal and installation instructions, and clearance data. The document contains information on systems like electrical, hydraulic, pneumatic, as well as the engine, fuel system, cooling system, and other mechanical components. Safety guidelines are also provided at the beginning.
Steyr 6140 profi classic tractor service repair manualfdjjjsekkskemm
This document is a service manual for various PROFI tractor models. It contains sections on hydraulic, pneumatic, electrical, and electronic systems of the primary and secondary hydraulic power systems, hydraulic command system, electrical power system, and electronic system. Other sections cover the engine and fuel systems, transmission, axles, brakes, steering, frame, cab, hitches and working tools. The introduction provides information on how to use the manual and what is contained in each section.
Steyr 6125 profi tractor service repair manualfdjjjsekkskemm
This document provides a service manual for various PROFI tractor models. It includes:
- An introduction describing the manual's contents and coding system for locating technical information.
- Sections covering major vehicle systems like distribution systems, power production, powertrain, travelling, body and structure, and crop processing.
- Chapters within each section providing technical data, functional descriptions, diagnostics, and service procedures for components of the covered systems.
New holland fr850 forage harvester service repair manual [715912001 7159231...fdjjjsekkskemm
The document is a service manual for various forage harvester models that provides technical information to support maintenance and repairs. It contains sections covering various vehicle systems like the engine, transmission, hydraulics, electrical systems, and attachments. Each section contains chapters that break down the components and functions of those systems, and provide the location, type of information, and product applicability for each technical content item. Technical data, functional descriptions, diagnostics, and service procedures are organized at the component level. Safety information is also included to warn technicians of potential hazards when working on the equipment.
Steyr f4 hfe613u tier 4b (final) engine service repair manualfdjjjsekkskemm
This document contains a service manual for Tier 4B (final) engines. It includes sections on the engine, electrical systems, and safety information. The manual provides maintenance and repair instructions for technicians, with the goal of ensuring personal safety and preventing damage to equipment. It lists many engine part numbers and cautions technicians to only perform work according to the procedures in the manual using recommended tools.
Case wx218 wheeled excavator service repair manualfdjjjsekkskemm
The document is a service manual for a WX218 wheeled excavator. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers and buckets, dozer blade and arm, and the platform, cab, bodywork and decals. The manual provides removal and installation instructions for components with references to specific section numbers for more details.
Steyr f4 hfe413m tier 4b (final) engine service repair manualfdjjjsekkskemm
This document is a service manual for Tier 4B (final) engines. It provides part numbers and model numbers for various engine components. The manual contains sections on the engine, electrical systems, and basic instructions for shop and assembly work. Safety information is also provided regarding working on equipment and handling hazardous materials.
Case ih jx1070 c tractor service repair manualfdjjjsekkskemm
This document provides guidance on health and safety precautions for working with various chemicals and materials. It lists hazards associated with acids, alkalis, solvents, fire, dust, electric shock, exhaust fumes, and other substances. Do's and don'ts are outlined, and first aid information is included to ensure safety when handling these materials.
Steyr f4 dfe613h tier 4b (final) engine service repair manualfdjjjsekkskemm
This document is a service manual for Tier 4B (final) engines. It provides model numbers for engines covered and copyright information. The manual contains sections on the engine, electrical systems, and introduction/safety information. Model numbers and part numbers are listed for components covered in the manual.
Case ih jx1060 c tractor service repair manualfdjjjsekkskemm
This document provides health and safety precautions and guidelines for working with various chemicals and materials that may be encountered when servicing agricultural equipment. It lists hazards from acids, alkalis, solvents, fuels, dusts, fumes, and other substances. Precautions are given for safe handling, storage, first aid, and avoiding risks of fire, electric shock, inhalation, and contact with skin or eyes. Proper protective equipment and ventilation are advised.
Case ih jx100 u tractor service repair manualfdjjjsekkskemm
The document is a repair manual for the JXU Series tractors produced by New Holland. It provides an overview of the manual's contents which include sections covering the engine, transmission, brakes, hydraulics, steering, axles, electrical systems, and vehicle bodywork. Safety precautions are outlined, emphasizing the importance of following procedures, wearing protective equipment, avoiding moving parts, and taking care around fluids, batteries, and pressurized systems.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
8. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE CONSTRUCTION Sales and Service Networks.
48005353 27/04/2016
3
9. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
48005353 27/04/2016
4
10. INTRODUCTION
Personal safety
Carefully read this Manual before proceeding with main-
tenance, repairs, refuelling or other machine operations.
Repairs have to be carried out only by authorized and in-
structed staff; specific precautions have to be taken when
grinding, welding or when using mallets or heavy ham-
mers.
Not authorized persons are not allowed to repair or carry
out maintenance on this machine. Do not carry out any
work on the equipment without prior authorization.
Ask your employer about the safety instructions in force
and safety equipment.
Nobody should be allowed in the cab during machine
maintenance unless he is a qualified operator helping
with the maintenance work.
If it is necessary to move the equipment to carry out re-
pairs or maintenance, do not lift or lower the equipment
from any other position than the operator’s seat.
TULI12WEX2004AA 1
Never carry out any operation on the machine when the
engine is running, except when specifically indicated.
Stop the engine and ensure that all pressure is relieved
from hydraulic circuits before removing caps, covers,
valves, etc.
All repair and maintenance operations should be carried
out with the greatest care and attention.
Service stairs and platforms used in a workshop or in the
field should be built in compliance with the safety rules in
force.
Any functional disorders, especially those affecting the
safety of the machine, should therefore be rectified im-
mediately.
DANGER
Unexpected movement!
Make sure parking brake is applied. Secure
machine with wheel chocks.
Failure to comply will result in death or serious
injury.
D0013A
TULI12WEX2005AA 2
Before performing any work on the machine, attach a
maintenance in progress tag. This tag can be applied on
the left-hand control lever, safety lever or cab door.
48005353 27/04/2016
5
14. Engine - Air cleaners and lines
Air cleaners and lines - Static description
The support (1) attaches the air cleaner (2) to the frame
of the machine.
The air cleaner (2) filters the intake air of the engine.
The filtered air flows into the hose (3).
SMIL14WEX0225GB 1
48005353 27/04/2016
10.1 [10.202] / 3
15. Engine - Air cleaners and lines
The air cleaner consists of:
• a cover (1);
• a locking clip (2);
• two filter elements (3) and (4);
• a case (5);
• a dust charge valve (6).
TULI12WEX2146AB 2
48005353 27/04/2016
10.1 [10.202] / 4
16. Engine - Air cleaners and lines
Air intake lines - Remove
1. Remove the hose (1).
• Loosen the screw (2) and remove the washer (3), the
lock washer (4) and the clamp (5).
• Loosen the two clamps (6).
• Disconnect the two ends of the hose (1) and remove
it.
2. Remove the hose (7).
• Loosen the clamps (8) and (9).
• Disconnect the two ends of the hose (7) and remove
it.
3. Remove the hose (10).
• Loosen the clamps (11).
• Disconnect the two ends of the hose (10) and re-
move it.
SMIL14WEX0228BB 1
48005353 27/04/2016
10.1 [10.202] / 5
17. Engine - Air cleaners and lines
Air intake lines - Install
1. Install the hose (1).
• Connect the two ends of the hose (1).
• Install the two clamps (6) and tighten them to
5.9 N·m (4.4 lb ft).
• Install the clamp (5) by means of the screw (2) and
relevant washer (3) and lock washer (4).
2. Install the hose (7).
• Connect the two ends of the hose (7).
• Install the clamps (8) and (9) and tighten them to
5.9 N·m (4.4 lb ft).
3. Install the hose (10).
• Connect the two ends of the hose (10).
• Install the two clamps (11) and tighten them to
5.9 N·m (4.4 lb ft).
SMIL14WEX0228BB 1
48005353 27/04/2016
10.1 [10.202] / 6
18. Engine - Air cleaners and lines
Air cleaner support - Remove
1. Remove three screws (3) and relevant washers (4) and
lock washers (5).
2. Remove four screws (6) and relevant washers (7).
3. Separate the air cleaner support (2) from the air cleaner
(1).
SMIL14WEX0229AB 1
48005353 27/04/2016
10.1 [10.202] / 7
19. Engine - Air cleaners and lines
Air cleaner support - Install
1. Install the air cleaner support (2) by means of three
screws (3) and relevant washers (4) and lock washers
(5). Tighten to 36.2 - 42.2 N·m (26.7 - 31.1 lb ft).
2. Install the air cleaner (1) to the support (2) by means
of four screws (6) and relevant washers (7). Tighten to
36.2 - 42.2 N·m (26.7 - 31.1 lb ft).
SMIL14WEX0229AB 1
48005353 27/04/2016
10.1 [10.202] / 8
20. Engine - Air cleaners and lines
Air cleaner - Replace
Open the cover on the left side of the machine.
Remove the air cleaner sensor (A).
SMIL13WEX0078AB 1
Push the clip (2) forward, turn the filter cover (1) to the
left and remove it.
The dust discharge valve (6) is included into the filter
cover (1).
Remove the main filter element (3) carefully from the
case (5).
Remove from the case (5) also the filter element (4).
NOTE: Beyond respecting the maintenance interval of the
safety element (4), this has to be replaced after the main
element (3) has been cleaned three times.
Clean the inside of the filter case (5) and the cover (1)
accurately, by means of a vacuum cleaner.
Install the new safety element (4) and then the main
new element (3).
Reassemble the cover (1) and lock it with the fastener
(2).
Re-install the sensor (A) on the air cleaner.
Tighten the sensor (A) to 3.9 N·m (2.9 lb ft).
TULI12WEX2146AB 2
48005353 27/04/2016
10.1 [10.202] / 9
21. Engine - Fuel filters
Fuel filters - Replace
NOTICE: To work in safety, switch off and let the cooling of
engine before work.
NOTICE: Dispose worn out filters respecting the current
environmental legislation.
Open the right door (1) to access to the fuel filters.
Replace fuel filters according to maintenance plan or in
case of damage.
To replace, operate as follow.
F00384N1 1
1. Remove the filter elements (1) from support (2). Take
care to collect the fuel that comes out.
2. Clean the support surface.
3. Fill of fuel the new filter elements.
4. Lubricate the seal of the new filter elements.
5. Tighten the filter elements on support.
TULI12WEX2167AB 2
48005353 27/04/2016
10.2 [10.206] / 3
22. Engine - Fuel filters
Fuel-water separator filter - Drain fluid
NOTICE: To work in safety, switch off and let the cooling of
engine before work.
NOTE: Water in fuel can cause corrosion and engine dam-
age.
Open the right door (1) to access to the fuel-water sep-
arator filter.
F00384N1 1
Fuel-water separator filters impurity and separates the
water present in fuel.
A sensor (1) is located on draining valve (2) of water
separator (3).
TULI12WEX2164AB 2
It causes the lighting of red light (5) on multifunction
display (4) (with displaying of fault code 7048 “water in
fuel”), each time water is detected into the water sepa-
rator.
At the same time an acoustic signal is activated.
NOTICE: Immediately drain water from water separator
when fault code 7048 (4) and red light (5) appear on dis-
play. If within 30 min the fault code appears again, drain
water from tank.
1. Gain access to the water separator filter (3) opening the
right door of upper structure.
2. Place a container under the water separator to collect
the water.
3. Disconnect the connector (1).
4. Open the drain valve (2), (located in the bottom part of
water separator) and let water draining.
5. When fuel comes out, close the drain valve (2).
6. Connect the connector (1).
7. Check the sealing of water separator filter.
SMIL12WEX0319AB 3
48005353 27/04/2016
10.2 [10.206] / 4
23. Engine - Fuel filters
Fuel-water separator filter - Bleed
NOTICE: To work in safety, switch off and let the cooling of
engine before work.
Gain access to the water separator filter (1) opening the
right door of upper structure.
F00384N1 1
Air accumulation is possible into the filter (1).
To bleed air operate as follow.
1. Loosen the bleeding screw (2).
2. Connect a rubber hose to the bleeding screw (2) to
direct the fuel into a fuel collecting container.
3. Manually operate on pump (3) until fuel comes out with-
out air bubbles from rubber hose.
4. Disconnect the rubber hose.
5. Tighten the bleeding screw (2).
TULI12WEX2166AB 2
48005353 27/04/2016
10.2 [10.206] / 5
24. Engine - Fuel filters
Fuel-water separator filter - Replace
NOTICE: To work in safety, switch off and let the cooling of
engine before work.
NOTICE: Dispose worn out filters respecting the current
environmental legislation.
Open the right door (1) to access to the water separator
filter.
F00384N1 1
Do not clean the water separator, but replace it accord-
ing to the maintenance plan.
1. Disconnect the connector of the sensor (3).
2. Remove the filter element (1) from water separator (2).
Pay attention to not pour fuel.
3. Clean the support surface.
4. Fill the new filter element with fuel.
5. Lubricate the seal of the new filter element.
6. Tighten the filter element on water separator.
7. Connect the connector of the sensor (3).
8. If engine does not start, bleed air from fuel hoses.
9. After few minutes, check sealing between filter element
and water separator.
TULI12WEX2681AB 2
48005353 27/04/2016
10.2 [10.206] / 6
25. Engine - Fuel tanks
Fuel tanks - Exploded view
The fuel tank contains the fuel for the engine.
SMIL16WEX0040FB 1
1. Fuel tank 6. Drain cock
2. Flexible hose 7. Fuel transfer pump
3. Water separator 8. Fuel level sensor
4. Fuel filters 9. Refuelling pump sensor
5. Diesel engine
48005353 27/04/2016
10.3 [10.216] / 3
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Engine - Fuel tanks
Fuel tank - Drain fluid
Draining condensation
WARNING
Fuel vapors are explosive and flammable.
Do not smoke while handling fuel. Keep fuel
away from flames or sparks. Shut off engine
and remove key before servicing. Always work
in a well-ventilated area. Clean up spilled fuel
immediately.
Failure to comply could result in death or seri-
ous injury.
W0904A
To drain the condensation inside the fuel tank, proceed
as follows:
• Park the machine on a level surface.
• Rest the bucket to the ground.
• Deactivate the Auto-Idle function, turn the engine
speed throttle to LOW IDLE position, stop the en-
gine, extract the starter key and place the safety
lever in LOCK position.
• Get under the turret in correspondence with the fuel
tank and remove the guard.
• Connect a drain hose on the pipe (1). Slowly open
the cock (2) and let condensation and deposits drain
into a suitable container until only clean fuel comes
out.
• Once the draining operation is over, close cock (2),
remove the drain hose from pipe (1) and reinstall the
guard.
• Bleed air from the fuel system.
NOTE: when the temperature is above 0 °C, draining can
be done before engine start-up. When working with tem-
peratures below 0 °C, the tank should be drained at the end
of work, after engine stop, as water might freeze and not
drain properly.
SMIL12WEX0071AB 1
48005353 27/04/2016
10.3 [10.216] / 4
28. Engine - Fuel tanks
Fuel tank - Remove
Park the machine on a level and firm surface.
Engage the parking brake.
Lock the upper structure.
Stop the engine.
Empty the fuel tank.
Fuel tank capacity is 178 L (39 UK gal).
Remove the screws and the washers (1) and remove
the handrails (2).
SMIL13WEX0086AB 1
Under the upper structure, disconnect the delivery and
return hoses (3) from fuel tank (4).
SMIL12WEX0125AB 2
Gain access to the upper part of fuel tank (4) and dis-
connect the connector of fuel level sensor (5), the con-
nector of refueling pump sensor (6) and the refueling
hose (7).
Remove the expansion tank from the fuel tank.
SMIL12WEX0104AB 3
48005353 27/04/2016
10.3 [10.216] / 5
29. Engine - Fuel tanks
NOTICE: Fuel tank weights 80 kg (176.4 lb). Use suitable tools to lift the fuel tank.
Suitably sling the fuel tank.
Remove the four attaching screws (8) and the four
washers (9) from the bottom of fuel tank. Remove the
fuel tank.
SMIL12WEX0126AB 4
48005353 27/04/2016
10.3 [10.216] / 6
30. Engine - Fuel tanks
Fuel tank - Install
Position the fuel tank on upper structure frame.
NOTICE: Fuel tank weights 80 kg (176 lb). Use suitable
tools to lift the fuel tank.
Apply LOCTITE® 262™ on screws (8).
Install the four washers (9) and the four attaching
screws (8).
Tighten the screws (8) to the tightening torque of
216 N·m (159 lb ft).
SMIL12WEX0126AB 1
Gain access the upper part of fuel tank (4) and con-
nect the fuel level sensor (5), the connector of refueling
pump sensor (6) and the refueling hose (7).
Tighten the hose to the torque of 6.86 N·m (5 lb ft).
Fasten the expansion tank to the fuel tank.
SMIL12WEX0104AB 2
Connect the delivery and return hoses (3) to fuel tank
(4).
SMIL12WEX0123AB 3
Install the handrails (2) and attach them with the screws
and the washers (1).
SMIL13WEX0086AB 4
Refuel the fuel tank.
Fuel tank capacity is 178 L (39 UK gal).
48005353 27/04/2016
10.3 [10.216] / 7
31. Engine - Fuel tanks
Fuel tank - Cleaning
Place a container under the fuel tank and completely
empty it.
NOTE: Maximum capacity of fuel tank is 190 l (50.2 US
gal).
Open the drain cock (3).
Unscrew the cover of filling neck (1).
Remove the filter (2).
Perform the cleaning and washing of tank (4) with the
suitable device.
Close the drain cock (3).
Install the filter (2) cleaned or new.
Refuel the fuel tank.
Screw the cover of filling neck (1) and tighten it with the
suitable equipment key.
SMIL12WEX0127AB 1
48005353 27/04/2016
10.3 [10.216] / 8