This document is a service manual for Case skid steer loaders and compact track loaders with Tier 4B engines. It contains sections on the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork and decals. Safety information is provided at the beginning regarding servicing equipment and personal safety precautions when working on the machines. Torque specifications and hydraulic standards are also listed, along with basic instructions for shop work and preventing hydraulic contamination. Machine identification and orientation are defined to properly service the equipment.
Case cx210 c crawler excavator service repair manualdfujsjefjkskemm
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section contains multiple subsections that provide detailed instructions and part numbers for repair and maintenance of specific components. The introduction emphasizes the importance of qualified dealership personnel strictly following the procedures in the manual and using approved parts for any repair or maintenance work.
New holland e305 c evo crawler excavator service repair manualuyydfhjjskkmd
This document is a service manual for the E305C EVO crawler excavator. It contains information on servicing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components of the excavator. The manual provides part numbers and instructions for qualified service personnel to carry out repairs and maintenance. It emphasizes the importance of using approved parts and following procedures precisely.
Case cx250 c crawler excavator service repair manualhfjsjekfksmem
This document is a service manual for the CX250C Crawler Excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the cab, bodywork and decals. Safety is emphasized, with a notice that all repair and maintenance work must be carried out by qualified dealership personnel only. The manual provides instructions and procedures to service the excavator safely and properly.
Case cx490 c crawler excavators lc version (tier 3) turkish market service ...fusjejfjsekfkem
This service manual section provides specifications for the Isuzu 6UZ1 diesel engine, including its cooling system, lubrication system, and electrical system. The engine is an inline 6-cylinder overhead cam design with a displacement of 9.839 liters. Maximum output is 270 kW at 2000 RPM with maximum torque of 1435 Nm at 1500 RPM. Coolant capacity is 22.5 liters and oil capacity ranges from 30-41 liters. The generator is a 24V/50A unit while the starter is 24V/5.5kW.
New holland e305 c evo crawler excavator service repair manualfusjefkskemme
This document is a service manual for an E305C EVO crawler excavator. It provides information on servicing and repairing the excavator's engine. The manual includes sections on the engine and crankcase, cooling system, electrical system, fuel system, and other engine components. It provides specifications, component descriptions, diagrams, and repair procedures.
New holland e305 c evo crawler excavator service repair manualjfdskekdmme
This document is a service manual for an E305C EVO crawler excavator. It contains sections on the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and other systems. The engine section provides detailed specifications, component descriptions, and maintenance information for the excavator's 6HK1X diesel engine, including the cylinder block, pistons, cylinder head, crankshaft, EGR system, and other engine parts.
Case cx350 c crawler excavator service repair manualfujjsefksekmem
This document provides technical specifications and descriptions for key components of the CX350C and CX380C crawler excavator engines, including:
- The engine is a 6HK1X inline 6-cylinder diesel with 7.79L displacement and other specifications.
- Key systems like cooling, fuel injection, electrical, and lubrication are described.
- Critical components like the cylinder block, liner, piston, head, crankshaft, EGR and more are detailed.
- Identification information and tightening procedures are provided.
Case cx380 c crawler excavator service repair manualfusjefjjskekmem
This document is a service manual for CX350C and CX380C crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. Safety is emphasized, and only qualified dealership personnel should perform repairs following the instructions in the manual. The manual contains detailed part numbers, diagrams, and troubleshooting codes to aid technicians with maintenance and repairs.
Case cx210 c crawler excavator service repair manualdfujsjefjkskemm
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. Each section contains multiple subsections that provide detailed instructions and part numbers for repair and maintenance of specific components. The introduction emphasizes the importance of qualified dealership personnel strictly following the procedures in the manual and using approved parts for any repair or maintenance work.
New holland e305 c evo crawler excavator service repair manualuyydfhjjskkmd
This document is a service manual for the E305C EVO crawler excavator. It contains information on servicing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components of the excavator. The manual provides part numbers and instructions for qualified service personnel to carry out repairs and maintenance. It emphasizes the importance of using approved parts and following procedures precisely.
Case cx250 c crawler excavator service repair manualhfjsjekfksmem
This document is a service manual for the CX250C Crawler Excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the cab, bodywork and decals. Safety is emphasized, with a notice that all repair and maintenance work must be carried out by qualified dealership personnel only. The manual provides instructions and procedures to service the excavator safely and properly.
Case cx490 c crawler excavators lc version (tier 3) turkish market service ...fusjejfjsekfkem
This service manual section provides specifications for the Isuzu 6UZ1 diesel engine, including its cooling system, lubrication system, and electrical system. The engine is an inline 6-cylinder overhead cam design with a displacement of 9.839 liters. Maximum output is 270 kW at 2000 RPM with maximum torque of 1435 Nm at 1500 RPM. Coolant capacity is 22.5 liters and oil capacity ranges from 30-41 liters. The generator is a 24V/50A unit while the starter is 24V/5.5kW.
New holland e305 c evo crawler excavator service repair manualfusjefkskemme
This document is a service manual for an E305C EVO crawler excavator. It provides information on servicing and repairing the excavator's engine. The manual includes sections on the engine and crankcase, cooling system, electrical system, fuel system, and other engine components. It provides specifications, component descriptions, diagrams, and repair procedures.
New holland e305 c evo crawler excavator service repair manualjfdskekdmme
This document is a service manual for an E305C EVO crawler excavator. It contains sections on the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and other systems. The engine section provides detailed specifications, component descriptions, and maintenance information for the excavator's 6HK1X diesel engine, including the cylinder block, pistons, cylinder head, crankshaft, EGR system, and other engine parts.
Case cx350 c crawler excavator service repair manualfujjsefksekmem
This document provides technical specifications and descriptions for key components of the CX350C and CX380C crawler excavator engines, including:
- The engine is a 6HK1X inline 6-cylinder diesel with 7.79L displacement and other specifications.
- Key systems like cooling, fuel injection, electrical, and lubrication are described.
- Critical components like the cylinder block, liner, piston, head, crankshaft, EGR and more are detailed.
- Identification information and tightening procedures are provided.
Case cx380 c crawler excavator service repair manualfusjefjjskekmem
This document is a service manual for CX350C and CX380C crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. Safety is emphasized, and only qualified dealership personnel should perform repairs following the instructions in the manual. The manual contains detailed part numbers, diagrams, and troubleshooting codes to aid technicians with maintenance and repairs.
Case cx380 c crawler excavator service repair manualfusekksejfkem
This document is a service manual for CX350C and CX380C crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. Safety is emphasized, and only qualified dealership personnel should perform repairs following the instructions in the manual. The manual contains detailed part numbers, diagrams, and troubleshooting codes to aid technicians with maintenance and repairs.
Case cx350 c crawler excavator service repair manualfusekksejfkem
This document is a service manual for CX350C and CX380C crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. Safety is emphasized, and only qualified dealership personnel should perform repairs following the instructions in the manual. The manual contains detailed part numbers, diagrams, and troubleshooting codes to aid technicians with maintenance and repairs.
Case cx350 c crawler excavator service repair manualfjskeksemm
This document is a service manual for CX350C and CX380C crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. Safety is emphasized, and only qualified dealership personnel should perform repairs and maintenance by strictly following the procedures in the manual. The manufacturer is not responsible for damages caused by unauthorized parts. Specifications are accurate at time of publication but subject to change.
Case cx380 c crawler excavator service repair manualfjsefksemmm
This document provides an overview of the engine specifications and components for a CX350C/CX380C crawler excavator. It includes general engine specifications, cooling system specifications, electrical system specifications, identification information, and descriptions of key engine components such as the cylinder block, cylinder head, crankshaft, EGR system, and common rail electronic fuel injection system.
New holland e385 c evo crawler excavator service repair manualfusjefkskemme
The document is a service manual that provides specifications and repair/maintenance instructions for the engine and various systems of an E385C EVO crawler excavator. It includes:
- Specifications for the 6HK1X engine, including displacement, compression ratio, injection order, lubrication system, cooling system, fuel system, electrical system, and starter/charging components.
- Diagrams and part numbers for the engine, cooling system, electrical system, and identification.
- Instructions for cleaning, inspecting, and installing engine parts like bearings, gears, seals, and shafts. It advises using genuine parts and proper lubricants.
- Sections covering repair and maintenance of the engine, hydraulic
New holland e385 c evo crawler excavator service repair manualjfdskekdmme
The document is a service manual that provides specifications and repair/maintenance instructions for the engine and various systems of an E385C EVO crawler excavator. It includes detailed sections on the engine and its components, hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, electrical systems, booms/dippers/buckets, and the cab/bodywork. The engine section provides specifications, component layout diagrams, and repair procedures for the engine, crankcase, cylinder heads, valves, pistons, crankshaft, fuel system, cooling system, lubrication system, and more.
Case cx210 c crawler excavator service repair manualufjsekksmemm
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. Each section includes subsections that provide instructions for repair and maintenance of specific components. The introduction emphasizes that all repair and maintenance work must be carried out by qualified dealership personnel strictly following the procedures in the manual.
Case cx210 c crawler excavator service repair manualfujjsefkskemme
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. Each section includes subsections that provide instructions for repair and maintenance of specific components. The introduction emphasizes that all repair and maintenance work must be carried out by qualified dealership personnel strictly following the procedures in the manual.
New holland w300 c wheel loader service repair manualfjsekkdmme
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, mounted equipment, and schematic foldouts. Sections within each tab provide removal and installation instructions, specifications, troubleshooting procedures, and other repair information for the various components.
New holland w170 c tier 4b (final) wheel loader service repair manualfjsekkdmme
This service manual provides information for servicing the W130C/W170C wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety precautions are provided, noting hazards that could cause death, serious injury, or machine/property damage. Only authorized personnel should perform repairs after carefully reviewing safety instructions.
New holland u80 c tier 4b (final) tractor loader service repair manualfjsekkdmme
The document provides instructions for removing an engine from a tractor. Key steps include:
- Draining fluids and removing components attached to the engine like cooling and fuel systems
- Disconnecting wiring harnesses and electrical connectors
- Removing mounting brackets and disconnecting the starter, alternator, and flex plate bolts
- Using an engine turning tool to access and remove bolts connecting the flex plate to the crankshaft
Proper preparation and disconnection of all attached components is required before removing the engine.
New holland tn70 s tractor service repair manualfjsekkdmme
This document is a service manual for TN55D, TN55S, TN65D, TN65S, TN70D, TN70S, TN75D, and TN75S tractors. It contains sections on the engine, clutch, transmissions, drive lines, brakes, hydraulic systems, steering, axles and wheels, air conditioning, electrical systems, and other components. Each section provides specifications, diagrams, troubleshooting guides, removal and installation instructions, and other repair information.
New holland tn55 s tractor service repair manualfjsekkdmme
This document is a service manual for TN55D, TN55S, TN65D, TN65S, TN70D, TN70S, TN75D, and TN75S tractors. It contains sections on the engine, clutch, transmissions, drive lines, brakes, hydraulic systems, steering, axles and wheels, air conditioning, electrical systems, and other components. Each section provides specifications, diagrams, troubleshooting guides, removal and installation instructions, and other repair information.
New holland tm140 tractor service repair manualfjsekkdmme
The document is a repair manual that provides instructions for servicing various components of TM tractor models. It includes sections covering the engine, clutch, transmission, drive lines, axles, brakes, hydraulics, steering, electrical systems, and cab. Each section lists the chapters and their page numbers to guide the user to specific repair information. The introduction provides general safety notices and instructions for tasks like shimming, installing seals, and applying sealers.
New holland td60 d tractor service repair manualfjsekkdmme
This document is a service manual for TD series tractor models TD60D through TD95D. It contains sections covering the tractor's general systems, engine, clutches, gearbox, transmission of motion, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, auxiliary equipment, electrical system, and cab. Each section provides specifications, diagrams, removal and installation instructions, and repair procedures for the various components.
New holland td3.50 tractor service repair manualfjsekkdmme
This document is a service manual for a TD3.50 tractor. It contains sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, wheels, and electrical systems. Safety warnings are provided at the beginning, advising technicians to take precautions such as disconnecting batteries and blocking equipment before performing maintenance.
New holland t6030 range command tractor service repair manualfjsekkdmme
The document is a service manual that provides technical specifications, descriptions of operation, and maintenance/repair procedures for the primary hydraulic power system on various tractor models. It includes information on the variable displacement hydraulic pump, charge pump, compensator, filters, and pressure testing procedures. The hydraulic pump section covers specifications, operation, component views, and procedures for removal, overhaul, assembly, installation, and pressure testing of the variable displacement pump.
New holland t5030 tractor service repair manualfjsekkdmme
The document is a service manual for tractors models T5030-T5060. It contains sections on general guidelines, the engine, clutch, transmissions, drive lines, mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axles and wheels, air conditioning, electrical systems, and platform/bodywork. The engine section provides specifications, tightening torques, recommended tools, and an engine view diagram. It offers technical information and guidelines for servicing the tractors.
New holland t4040 v tractor service repair manualfjsekkdmme
This document is a service manual for tractor models T4030N, T4040N, T4050N, T4060N, T4020V, T4030V, T4040V, and T4050V. It provides the engine type for each tractor model and market region combination, linking the product code to the appropriate engine. The manual contains model year ranges and product codes for each combination of tractor model, cab type, and market region. It aims to provide the necessary information to service these tractor models.
New holland t4030 deluxe tractor service repair manualfjsekkdmme
This document is a service manual for T4020, T4030, T4040, and T4050 tractor models. It contains sections on general guidelines, the engine, clutch, transmissions, drive lines, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, cab air conditioning, electrical systems, and the platform, cab and bodywork. Each section includes data, specifications, diagrams, removal and installation instructions, and fault finding information for the various components.
New holland t9.390 [zcf200001 ] tractor service repair manualfjsekkdmme
This document is a service manual for CNH America LLC tractor models T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 from PIN ZCF200001 and above and PIN ZDF200001 and above. The manual contains safety rules, instructions for servicing and assembly, product identification information, torque specifications, and sections covering the engine, transmission, axles, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, electrical systems, and platform/cab components.
New holland t8.380 powershift transmission (pst) tractor service repair manualfjsekkdmme
This document is a service manual for CNH Industrial America LLC tractors models T8.320, T8.350, T8.380, T8.410, T8.380 SmartTraxTM, and T8.410 SmartTraxTM with Powershift Transmissions. The manual contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, tracks and track suspension, cab climate control, and electrical systems.
More Related Content
Similar to Case tr340 tv380 tier 4 b (final) alpha series compact track loader service repair manual pin nfm482972 and above
Case cx380 c crawler excavator service repair manualfusekksejfkem
This document is a service manual for CX350C and CX380C crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. Safety is emphasized, and only qualified dealership personnel should perform repairs following the instructions in the manual. The manual contains detailed part numbers, diagrams, and troubleshooting codes to aid technicians with maintenance and repairs.
Case cx350 c crawler excavator service repair manualfusekksejfkem
This document is a service manual for CX350C and CX380C crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. Safety is emphasized, and only qualified dealership personnel should perform repairs following the instructions in the manual. The manual contains detailed part numbers, diagrams, and troubleshooting codes to aid technicians with maintenance and repairs.
Case cx350 c crawler excavator service repair manualfjskeksemm
This document is a service manual for CX350C and CX380C crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. Safety is emphasized, and only qualified dealership personnel should perform repairs and maintenance by strictly following the procedures in the manual. The manufacturer is not responsible for damages caused by unauthorized parts. Specifications are accurate at time of publication but subject to change.
Case cx380 c crawler excavator service repair manualfjsefksemmm
This document provides an overview of the engine specifications and components for a CX350C/CX380C crawler excavator. It includes general engine specifications, cooling system specifications, electrical system specifications, identification information, and descriptions of key engine components such as the cylinder block, cylinder head, crankshaft, EGR system, and common rail electronic fuel injection system.
New holland e385 c evo crawler excavator service repair manualfusjefkskemme
The document is a service manual that provides specifications and repair/maintenance instructions for the engine and various systems of an E385C EVO crawler excavator. It includes:
- Specifications for the 6HK1X engine, including displacement, compression ratio, injection order, lubrication system, cooling system, fuel system, electrical system, and starter/charging components.
- Diagrams and part numbers for the engine, cooling system, electrical system, and identification.
- Instructions for cleaning, inspecting, and installing engine parts like bearings, gears, seals, and shafts. It advises using genuine parts and proper lubricants.
- Sections covering repair and maintenance of the engine, hydraulic
New holland e385 c evo crawler excavator service repair manualjfdskekdmme
The document is a service manual that provides specifications and repair/maintenance instructions for the engine and various systems of an E385C EVO crawler excavator. It includes detailed sections on the engine and its components, hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, electrical systems, booms/dippers/buckets, and the cab/bodywork. The engine section provides specifications, component layout diagrams, and repair procedures for the engine, crankcase, cylinder heads, valves, pistons, crankshaft, fuel system, cooling system, lubrication system, and more.
Case cx210 c crawler excavator service repair manualufjsekksmemm
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. Each section includes subsections that provide instructions for repair and maintenance of specific components. The introduction emphasizes that all repair and maintenance work must be carried out by qualified dealership personnel strictly following the procedures in the manual.
Case cx210 c crawler excavator service repair manualfujjsefkskemme
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. Each section includes subsections that provide instructions for repair and maintenance of specific components. The introduction emphasizes that all repair and maintenance work must be carried out by qualified dealership personnel strictly following the procedures in the manual.
Similar to Case tr340 tv380 tier 4 b (final) alpha series compact track loader service repair manual pin nfm482972 and above (8)
New holland w300 c wheel loader service repair manualfjsekkdmme
This document is a service manual for CNH Italia S.p.A. wheel loaders models W270C and W300C. It contains instructions and specifications for servicing and repairing components of the wheel loaders. The manual is divided into tabs covering general information, engines, fuel system, electrical systems, steering, powertrain, brakes, hydraulics, mounted equipment, and schematic foldouts. Sections within each tab provide removal and installation instructions, specifications, troubleshooting procedures, and other repair information for the various components.
New holland w170 c tier 4b (final) wheel loader service repair manualfjsekkdmme
This service manual provides information for servicing the W130C/W170C wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety precautions are provided, noting hazards that could cause death, serious injury, or machine/property damage. Only authorized personnel should perform repairs after carefully reviewing safety instructions.
New holland u80 c tier 4b (final) tractor loader service repair manualfjsekkdmme
The document provides instructions for removing an engine from a tractor. Key steps include:
- Draining fluids and removing components attached to the engine like cooling and fuel systems
- Disconnecting wiring harnesses and electrical connectors
- Removing mounting brackets and disconnecting the starter, alternator, and flex plate bolts
- Using an engine turning tool to access and remove bolts connecting the flex plate to the crankshaft
Proper preparation and disconnection of all attached components is required before removing the engine.
New holland tn70 s tractor service repair manualfjsekkdmme
This document is a service manual for TN55D, TN55S, TN65D, TN65S, TN70D, TN70S, TN75D, and TN75S tractors. It contains sections on the engine, clutch, transmissions, drive lines, brakes, hydraulic systems, steering, axles and wheels, air conditioning, electrical systems, and other components. Each section provides specifications, diagrams, troubleshooting guides, removal and installation instructions, and other repair information.
New holland tn55 s tractor service repair manualfjsekkdmme
This document is a service manual for TN55D, TN55S, TN65D, TN65S, TN70D, TN70S, TN75D, and TN75S tractors. It contains sections on the engine, clutch, transmissions, drive lines, brakes, hydraulic systems, steering, axles and wheels, air conditioning, electrical systems, and other components. Each section provides specifications, diagrams, troubleshooting guides, removal and installation instructions, and other repair information.
New holland tm140 tractor service repair manualfjsekkdmme
The document is a repair manual that provides instructions for servicing various components of TM tractor models. It includes sections covering the engine, clutch, transmission, drive lines, axles, brakes, hydraulics, steering, electrical systems, and cab. Each section lists the chapters and their page numbers to guide the user to specific repair information. The introduction provides general safety notices and instructions for tasks like shimming, installing seals, and applying sealers.
New holland td60 d tractor service repair manualfjsekkdmme
This document is a service manual for TD series tractor models TD60D through TD95D. It contains sections covering the tractor's general systems, engine, clutches, gearbox, transmission of motion, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, auxiliary equipment, electrical system, and cab. Each section provides specifications, diagrams, removal and installation instructions, and repair procedures for the various components.
New holland td3.50 tractor service repair manualfjsekkdmme
This document is a service manual for a TD3.50 tractor. It contains sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, wheels, and electrical systems. Safety warnings are provided at the beginning, advising technicians to take precautions such as disconnecting batteries and blocking equipment before performing maintenance.
New holland t6030 range command tractor service repair manualfjsekkdmme
The document is a service manual that provides technical specifications, descriptions of operation, and maintenance/repair procedures for the primary hydraulic power system on various tractor models. It includes information on the variable displacement hydraulic pump, charge pump, compensator, filters, and pressure testing procedures. The hydraulic pump section covers specifications, operation, component views, and procedures for removal, overhaul, assembly, installation, and pressure testing of the variable displacement pump.
New holland t5030 tractor service repair manualfjsekkdmme
The document is a service manual for tractors models T5030-T5060. It contains sections on general guidelines, the engine, clutch, transmissions, drive lines, mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axles and wheels, air conditioning, electrical systems, and platform/bodywork. The engine section provides specifications, tightening torques, recommended tools, and an engine view diagram. It offers technical information and guidelines for servicing the tractors.
New holland t4040 v tractor service repair manualfjsekkdmme
This document is a service manual for tractor models T4030N, T4040N, T4050N, T4060N, T4020V, T4030V, T4040V, and T4050V. It provides the engine type for each tractor model and market region combination, linking the product code to the appropriate engine. The manual contains model year ranges and product codes for each combination of tractor model, cab type, and market region. It aims to provide the necessary information to service these tractor models.
New holland t4030 deluxe tractor service repair manualfjsekkdmme
This document is a service manual for T4020, T4030, T4040, and T4050 tractor models. It contains sections on general guidelines, the engine, clutch, transmissions, drive lines, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, cab air conditioning, electrical systems, and the platform, cab and bodywork. Each section includes data, specifications, diagrams, removal and installation instructions, and fault finding information for the various components.
New holland t9.390 [zcf200001 ] tractor service repair manualfjsekkdmme
This document is a service manual for CNH America LLC tractor models T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 from PIN ZCF200001 and above and PIN ZDF200001 and above. The manual contains safety rules, instructions for servicing and assembly, product identification information, torque specifications, and sections covering the engine, transmission, axles, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, electrical systems, and platform/cab components.
New holland t8.380 powershift transmission (pst) tractor service repair manualfjsekkdmme
This document is a service manual for CNH Industrial America LLC tractors models T8.320, T8.350, T8.380, T8.410, T8.380 SmartTraxTM, and T8.410 SmartTraxTM with Powershift Transmissions. The manual contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, frames and ballasting, steering, wheels, tracks and track suspension, cab climate control, and electrical systems.
New holland t8.380 continuously variable transmission (cvt) tractor service r...fjsekkdmme
This document is a service manual for CNH Industrial America LLC tractor models T8.320, T8.350, T8.380, T8.410, and T8.435 from November 2014. It contains over 90 sections covering all major vehicle systems, including the engine, transmission, axles, hydraulics, electrical systems, and more. Each section provides information for servicing and repairing the various components.
Hyster c114 (ej1.25 xl europe) forklift service repair manualfjsekkdmme
This document provides instructions for servicing the brake system on certain electric lift truck models. It describes the components of the brake system including the master cylinder, brake shoes, wheel cylinders, pedals, and parking brake. It then provides detailed removal and repair procedures for the master cylinder and brake assemblies for different tire configurations on the EJ1.25-1.75XL models. Safety warnings are included throughout regarding handling of brake components and fluid.
Hyster b214 (h18.00 xm 12ec europe) forklift service repair manualfjsekkdmme
1) The document describes the planetary gear axle assembly, which includes an axle housing, two final drive assemblies that are planetary gear units to increase torque to the drive wheels.
2) It provides diagrams and descriptions of the key components, including the axle shafts, sun gears, planetary pinions, planetary gear carriers, ring gears, and differentials.
3) The repair process is outlined, beginning with removing the wheels and tires, then draining fluids before disassembling the various components like the planetary gear carriers, ring gears, and wheel hubs. Safety warnings are provided throughout.
New holland t5.120 electro command tractor service repair manualfjsekkdmme
This service manual provides maintenance and repair instructions for T5.100, T5.110, and T5.120 Electro Command tractors. It includes sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader, accessories, and the platform, cab, bodywork and decals. Safety precautions are provided throughout.
Hyster a917 (h40.00 xm 12 europe) forklift service repair manualfjsekkdmme
This document provides descriptions and repair procedures for differentials. It describes the typical components of a differential assembly, including the housing, ring and pinion gear set, and differential assembly. The differential permits the drive wheels to rotate at different speeds during a turn. The document outlines steps to remove the differential carrier from the axle housing, remove the differential and ring gear from the carrier, and remove the drive pinion and pinion carrier from the carrier. It also provides instructions for disassembling the differential and ring gear assembly and disassembling the drive pinion and pinion carrier.
Hyster a495 (w25 za) forklift service repair manualfjsekkdmme
The document provides instructions for servicing and repairing a two-stage, zero free-lift mast. It outlines the main components of the mast and describes safety procedures for working near the mast. The procedures describe how to remove, disassemble, and reassemble the mast, as well as install it on the lift truck. Key steps include using overhead lifting devices and safety chains when parts of the mast are raised, removing the carriage and disassembling components, ensuring proper reinstallation and adjustment of wear strips and chains, and bleeding air from the hydraulic system.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
6. Contents
INTRODUCTION
Foreword - Important notice regarding equipment servicing (*) ................................ 3
Safety rules (*) .................................................................................. 4
Safety rules - Personal safety (*) ............................................................... 5
Safety rules - Ecology and the environment (*) ................................................. 6
Torque - Minimum tightening torques for normal assembly (*) ................................. 7
Torque - Standard torque data for hydraulics (*) .............................................. 12
Basic instructions - Shop and assembly (*) ................................................... 14
Hydraulic contamination (*) ................................................................... 16
Capacities (*) ................................................................................. 17
Product identification (*) ...................................................................... 18
Product identification - Machine orientation (*) ............................................... 20
(*) See content for specific models
47685161 24/06/2015
2
7. INTRODUCTION
Foreword - Important notice regarding equipment servicing
SR270 TIER 4B (FINAL) [NFM481941 - ] NA
SV300
TR340 TIER 4B (FINAL) [NFM482972 - ] NA
TV380
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE CONSTRUCTION Sales and Service Networks.
47685161 24/06/2015
3
8. INTRODUCTION
Safety rules
SR270 TIER 4B (FINAL) [NFM481941 - ] NA
SV300
TR340 TIER 4B (FINAL) [NFM482972 - ] NA
TV380
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47685161 24/06/2015
4
9. INTRODUCTION
Safety rules - Personal safety
SR270 TIER 4B (FINAL) [NFM481941 - ] NA
SV300
TR340 TIER 4B (FINAL) [NFM482972 - ] NA
TV380
Carefully study these precautions, and those included in the external attachment operators
manual, and insist that they be followed by those working with and for you.
1. Thoroughly read and understand this manual and the attachment Operator’s Manual before operating this or any
other equipment.
2. Be sure all people and pets are clear of the machine before starting. Sound the horn, if equipped, three times
before starting engine.
3. Only the operator should be on the machine when in operation. Never allow anyone to climb on to the machine
while it is in motion. If the machine is equipped with an Instructors Seat, this must only be used for training
purposes. Passengers must not be allowed to use the Instructors Seat.
4. Keep all shields in place. Never work around the machine or any of the attachments while wearing loose clothing
that might catch on moving parts.
5. Observe the following precautions whenever lubricating the machine or making adjustments.
• Disengage all clutching levers or switches.
• Lower the attachment, if equipped, to the ground or raise the attachment completely and engage the cylinder
safety locks. Completing these actions will prevent the attachment from lowering unexpectedly.
• Engage the parking brake.
• Shut off the engine and remove the key.
• Wait for all machine movement to stop before leaving the operators platform.
6. Always keep the machine in gear while travelling downhill.
7. The machine should always be equipped with sufficient front or rear axle weight for safe operation.
8. Under some field conditions, more weight may be required at the front or rear axle for adequate stability. This is
especially important when operating in hilly conditions or/when using heavy attachments.
9. Always lower the attachment, shut off the engine, set the parking brake, engage the transmission gears, remove
the key and wait for all machine movement to stop before leaving the operators platform.
10. If the attachment or machine should become obstructed or plugged; set the parking brake, shut off the engine
and remove the key, engage the transmission gears, wait for all machine or attachment motion to come to a stop,
before leaving the operators platform to removing the obstruction or plug.
11. Never disconnect or make any adjustments to the hydraulic system unless the machine and/or the attachment is
lowered to the ground or the safety lock(s) is in the engaged position.
12. Use of the flashing lights is highly recommended when operating on a public road.
13. When transporting on a road or highway, use accessory lights and devices for adequate warning to the opera-
tors of other vehicles. In this regard, check local government regulations. Various safety lights and devices are
available from your CASE CONSTRUCTION dealer.
14. Practice safety 365 days a year.
15. Keep all your equipment in safe operating condition.
16. Keep all guards and safety devices in place.
17. Always set the parking brake, shut off the engine and remove the key, engage the transmission gears, wait for all
machine or attachment motion to come to a stop, before leaving the operators platform to service the machine
and attachment.
18. Remember: A careful operator is the best insurance against an accident.
19. Extreme care should be taken in keeping hands and clothing away from moving parts.
47685161 24/06/2015
5
10. INTRODUCTION
Safety rules - Ecology and the environment
SR270 TIER 4B (FINAL) [NFM481941 - ] NA
SV300
TR340 TIER 4B (FINAL) [NFM482972 - ] NA
TV380
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. CASE
CONSTRUCTION strongly recommends that you return all used batteries to a CASE
CONSTRUCTION dealer, who will dispose of the used batteries or recycle the used
batteries properly. In some countries, this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
47685161 24/06/2015
6
12. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. INTRODUCTION
Inch Lock Nuts, All Metal (Three optional methods)
20090268 4
Grade Identification
Grade Corner Marking Method (1) Flats Marking Method (2) Clock Marking Method (3)
Grade A No Notches No Mark No Marks
Grade B One Circumferential Notch Letter B Three Marks
Grade C Two Circumferential Notches Letter C Six Marks
47685161 24/06/2015
11
17. INTRODUCTION
Torque - Standard torque data for hydraulics
SR270 TIER 4B (FINAL) [NFM481941 - ] NA
SV300
TR340 TIER 4B (FINAL) [NFM482972 - ] NA
TV380
INSTALLATION OF ADJUSTABLE FITTINGS
IN STRAIGHT THREAD O RING BOSSES
1. Lubricate the O-ring by coating it with a light oil or
petroleum. Install the O-ring in the groove adjacent
to the metal backup washer which is assembled at the
extreme end of the groove (4).
2. Install the fitting into the SAE straight thread boss until
the metal backup washer contacts the face of the boss
(5).
NOTE: Do not over tighten and distort the metal
backup washer.
3. Position the fitting by turning out (counterclockwise)
up to a maximum of one turn. Holding the pad of the
fitting with a wrench, tighten the locknut and washer
against the face of the boss (6).
23085659 1
STANDARD TORQUE DATA FOR HYDRAULIC TUBES AND FITTINGS
TUBE NUTS FOR 37° FLARED FITTINGS O-RING BOSS PLUGS
ADJUSTABLE FITTING
LOCKNUTS, SWIVEL
JIC- 37° SEATS
SIZE TUBING OD THREAD
SIZE
TORQUE TORQUE
4 6.4 mm (1/4 in) 7/16-20 12 - 16 N·m (9 - 12 lb ft) 8 - 14 N·m (6 - 10 lb ft)
5 7.9 mm (5/16 in) 1/2-20 16 - 20 N·m (12 - 15 lb ft) 14 - 20 N·m (10 - 15 lb ft)
6 9.5 mm (3/8 in) 9/16-18 29 - 33 N·m (21 - 24 lb ft) 20 - 27 N·m (15 - 20 lb ft)
8 12.7 mm (1/2 in) 3/4-16 47 - 54 N·m (35 - 40 lb ft) 34 - 41 N·m (25 - 30 lb ft)
10 15.9 mm (5/8 in) 7/8-14 72 - 79 N·m (53 - 58 lb ft) 47 - 54 N·m (35 - 40 lb ft)
12 19.1 mm (3/4 in) 1-1/16-12 104 - 111 N·m (77 - 82 lb ft) 81 - 95 N·m (60 - 70 lb ft)
14 22.2 mm (7/8 in) 1-3/16-12 122 - 136 N·m (90 - 100 lb ft) 95 - 109 N·m (70 - 80 lb ft)
16 25.4 mm (1 in) 1-5/16-12 149 - 163 N·m (110 - 120 lb ft) 108 - 122 N·m (80 - 90 lb ft)
20 31.8 mm (1-1/4 in) 1-5/8-12 190 - 204 N·m (140 - 150 lb ft) 129 - 158 N·m (95 - 115 lb ft)
24 38.1 mm (1-1/2 in) 1-7/8-12 217 - 237 N·m (160 - 175 lb ft) 163 - 190 N·m (120 - 140 lb ft)
32 50.8 mm (2 in) 2-1/2-12 305 - 325 N·m (225 - 240 lb ft) 339 - 407 N·m (250 - 300 lb ft)
These torques are not recommended for tubes of 12.7 mm (1/2 in) OD and larger with wall thickness of 0.889 mm
(0.035 in) or less. The torque is specified for 0.889 mm (0.035 in) wall tubes on each application individually.
Before installing and torquing 37 ° flared fittings, clean the face of the flare and threads with a clean solvent or Loctite
cleaner and apply hydraulic sealant LOCTITE® 569 to the 37 ° flare and the threads.
Install fitting and torque to specified torque, loosen fitting and retorque to specifications.
47685161 24/06/2015
12
18. INTRODUCTION
PIPE THREAD FITTING TORQUE
Before installing and tightening pipe fittings, clean the
threads with a clean solvent or Loctite cleaner and apply
sealant LOCTITE® 567 PST PIPE SEALANT for all fittings
including stainless steel or LOCTITE® 565 PST for most
metal fittings. For high filtration/zero contamination sys-
tems use LOCTITE® 545.
PIPE THREAD FITTING
Thread Size Torque (Maximum)
1/8-27 13 N·m (10 lb ft)
1/4-18 16 N·m (12 lb ft)
3/8-18 22 N·m (16 lb ft)
1/2-14 41 N·m (30 lb ft)
3/4-14 54 N·m (40 lb ft)
INSTALLATION OF ORFS (O-RING FLAT
FACED) FITTINGS
When installing ORFS fittings thoroughly clean both flat
surfaces of the fittings (1) and lubricate the O-ring (2) with
light oil. Make sure both surfaces are aligned properly.
Torque the fitting to specified torque listed throughout the
repair manual.
NOTICE: If the fitting surfaces are not properly cleaned,
the O-ring will not seal properly. If the fitting surfaces are
not properly aligned, the fittings may be damaged and will
not seal properly.
NOTICE: Always use genuine factory replacement oils
and filters to ensure proper lubrication and filtration of en-
gine and hydraulic system oils.
The use of proper oils, grease, and keeping the hydraulic
system clean will extend machine and component life.
50011183 2
47685161 24/06/2015
13
19. INTRODUCTION
Basic instructions - Shop and assembly
SR270 TIER 4B (FINAL) [NFM481941 - ] NA
SV300
TR340 TIER 4B (FINAL) [NFM482972 - ] NA
TV380
Shimming
For each adjustment operation, select adjusting shims and measure the adjusting shims individually using a microm-
eter, then add up the recorded values. Do not rely on measuring the entire shimming set, which may be incorrect, or
the rated value shown on each shim.
Rotating shaft seals
For correct rotating shaft seal installation, proceed as follows:
1. Before assembly, allow the seal to soak in the oil it will be sealing for at least thirty minutes.
2. Thoroughly clean the shaft and check that the working surface on the shaft is not damaged.
3. Position the sealing lip facing the fluid.
NOTE: With hydrodynamic lips, take into consideration the shaft rotation direction and position the grooves so that
they will move the fluid towards the inner side of the seal.
4. Coat the sealing lip with a thin layer of lubricant (use oil rather than grease). Fill the gap between the sealing lip
and the dust lip on double lip seals with grease.
5. Insert the seal in its seat and press down using a flat punch or seal installation tool. Do not tap the seal with a
hammer or mallet.
6. While you insert the seal, check that the seal is perpendicular to the seat. When the seal settles, make sure that
the seal makes contact with the thrust element, if required.
7. To prevent damage to the seal lip on the shaft, position a protective guard during installation operations.
O-ring seals
Lubricate the O-ring seals before you insert them in the seats. This will prevent the O-ring seals from overturning and
twisting, which would jeopardize sealing efficiency.
Sealing compounds
Apply a sealing compound on the mating surfaces when specified by the procedure. Before you apply the sealing
compound, prepare the surfaces as directed by the product container.
Spare parts
Only use CNH Original Parts or CASE CONSTRUCTION Original Parts.
Only genuine spare parts guarantee the same quality, duration, and safety as original parts, as they are the same
parts that are assembled during standard production. Only CNH Original Parts or CASE CONSTRUCTION Original
Parts can offer this guarantee.
When ordering spare parts, always provide the following information:
• Machine model (commercial name) and Product Identification Number (PIN)
• Part number of the ordered part, which can be found in the parts catalog
47685161 24/06/2015
14