This document is a service manual that provides maintenance and repair information for various CNH Industrial tractor models including Rowtrac, Steiger, and Quadtrac tractors from 370 to 620 horsepower. The manual contains over 20 sections that cover all major tractor systems from the engine and transmission to hydraulics, steering, electrical systems, and more. Each section includes subsections on specific components.
Case ih magnum 180 continuously variable transmission (cvt) tier 4 b tractor ...ufjjsjefkkekmme
This service manual section provides instructions for removing the engine and crankcase assembly from several Case IH Magnum tractor models. The steps include disconnecting electrical and fluid connections, removing mounting hardware, and detaching components attached to the engine like the air intake system, exhaust system, and driveshaft. Proper lifting equipment is required to remove heavy components like the diesel oxidation catalyst.
Case ih quantum 100 f tractor service repair manual (pin zflk00441 and above)dfujjsefkemm
This document provides a service manual for Case IH Quantum tractors, including the Quantum 80F, 90F, 100F, and 110F models. It contains sections on the tractor engine, transmission, axles, hydraulics, electrical systems, and other components. Safety warnings and regulations for working on the tractors are also provided. The manual is intended to be used by qualified service technicians when repairing and maintaining the tractors.
New holland 8670 tractor service repair manualfjskekertkskemm
This document is a repair manual section for a New Holland tractor engine and lubrication system. It includes specifications, torque values, grease and sealant types, special tools, descriptions of engine operation and components. The section covers the cylinder head, camshaft, crankshaft, connecting rods, pistons, manifolds, cylinder block, and timing gears. It also describes the engine lubrication system.
Massey ferguson mf3120 tractor service parts catalogue manual (part number 1...fjskekertkskemm
1. The document provides a list of parts and their descriptions for the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, and turbocharger of a Massey Ferguson T6.60 engine for tractors 3120/3120T.
2. It includes item numbers, part numbers, quantities, part names, and comments for each component.
3. The list contains over 50 individual parts for the various engine systems, with detailed information on replacements, serviceability, and component interactions.
Massey ferguson 4225 tractors ( k37008) service parts catalogue manual (part...fjskekertkskemm
1. The document provides parts lists and technical specifications for cylinder blocks, crankshafts, pistons, and connecting rods for Massey Ferguson 4225, 4235, and 4240 tractors.
2. It lists over 40 individual parts with part numbers, quantities, descriptions, and other identifying information. Footnotes provide additional details on some part specifications.
3. The parts lists are broken into sections covering different components and variants distinguished by color coding ("blue" or "green") and intended tractor model.
Massey ferguson 342 tractor service parts catalogue manual (part number 819793)fjskekertkskemm
This document provides part numbers and descriptions for engine components of a Massey Ferguson 342 tractor with an Ad3.152 engine. It includes listings for the cylinder block, crankshaft, pistons, piston rods, cylinder head, and other engine parts, along with notes on part replacements and serial number ranges. Diagrams show the layout and components of the engine cylinder block and head.
Massey ferguson 251 xe tractor (brazil) service parts catalogue manual (part ...fjskekertkskemm
This document contains parts lists and diagrams for the engine and related components of a Massey Ferguson 251XE tractor made for the Brazilian market. It includes over 30 pages detailing over 250 individual parts that make up the engine, from major components like the cylinder block and head to minor items like bolts, pins, and seals. Exploded diagrams show the assembly of components like the crankshaft, pistons, connecting rods, timing gears, and camshaft.
Massey ferguson 240 tractor ( -- a20287 ( gb )) service parts catalogue manua...fjskekertkskemm
This document provides part numbers and descriptions for components of a Massey Ferguson 240 tractor engine. It includes listings for the cylinder block, crankshaft, pistons, connecting rods, and other internal engine parts. Item numbers, part numbers, quantities, descriptions, and additional identifying information like serial numbers or build lists are provided for each component.
Case ih magnum 180 continuously variable transmission (cvt) tier 4 b tractor ...ufjjsjefkkekmme
This service manual section provides instructions for removing the engine and crankcase assembly from several Case IH Magnum tractor models. The steps include disconnecting electrical and fluid connections, removing mounting hardware, and detaching components attached to the engine like the air intake system, exhaust system, and driveshaft. Proper lifting equipment is required to remove heavy components like the diesel oxidation catalyst.
Case ih quantum 100 f tractor service repair manual (pin zflk00441 and above)dfujjsefkemm
This document provides a service manual for Case IH Quantum tractors, including the Quantum 80F, 90F, 100F, and 110F models. It contains sections on the tractor engine, transmission, axles, hydraulics, electrical systems, and other components. Safety warnings and regulations for working on the tractors are also provided. The manual is intended to be used by qualified service technicians when repairing and maintaining the tractors.
New holland 8670 tractor service repair manualfjskekertkskemm
This document is a repair manual section for a New Holland tractor engine and lubrication system. It includes specifications, torque values, grease and sealant types, special tools, descriptions of engine operation and components. The section covers the cylinder head, camshaft, crankshaft, connecting rods, pistons, manifolds, cylinder block, and timing gears. It also describes the engine lubrication system.
Massey ferguson mf3120 tractor service parts catalogue manual (part number 1...fjskekertkskemm
1. The document provides a list of parts and their descriptions for the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, and turbocharger of a Massey Ferguson T6.60 engine for tractors 3120/3120T.
2. It includes item numbers, part numbers, quantities, part names, and comments for each component.
3. The list contains over 50 individual parts for the various engine systems, with detailed information on replacements, serviceability, and component interactions.
Massey ferguson 4225 tractors ( k37008) service parts catalogue manual (part...fjskekertkskemm
1. The document provides parts lists and technical specifications for cylinder blocks, crankshafts, pistons, and connecting rods for Massey Ferguson 4225, 4235, and 4240 tractors.
2. It lists over 40 individual parts with part numbers, quantities, descriptions, and other identifying information. Footnotes provide additional details on some part specifications.
3. The parts lists are broken into sections covering different components and variants distinguished by color coding ("blue" or "green") and intended tractor model.
Massey ferguson 342 tractor service parts catalogue manual (part number 819793)fjskekertkskemm
This document provides part numbers and descriptions for engine components of a Massey Ferguson 342 tractor with an Ad3.152 engine. It includes listings for the cylinder block, crankshaft, pistons, piston rods, cylinder head, and other engine parts, along with notes on part replacements and serial number ranges. Diagrams show the layout and components of the engine cylinder block and head.
Massey ferguson 251 xe tractor (brazil) service parts catalogue manual (part ...fjskekertkskemm
This document contains parts lists and diagrams for the engine and related components of a Massey Ferguson 251XE tractor made for the Brazilian market. It includes over 30 pages detailing over 250 individual parts that make up the engine, from major components like the cylinder block and head to minor items like bolts, pins, and seals. Exploded diagrams show the assembly of components like the crankshaft, pistons, connecting rods, timing gears, and camshaft.
Massey ferguson 240 tractor ( -- a20287 ( gb )) service parts catalogue manua...fjskekertkskemm
This document provides part numbers and descriptions for components of a Massey Ferguson 240 tractor engine. It includes listings for the cylinder block, crankshaft, pistons, connecting rods, and other internal engine parts. Item numbers, part numbers, quantities, descriptions, and additional identifying information like serial numbers or build lists are provided for each component.
Kubota v2403 m-di-t diesel engine service repair manualfjskekertkskemm
This document provides specifications for several Kubota diesel engine models. It includes information on displacement, power output, operating speed, lubrication system, cooling system, dimensions, weight and other technical details. The specifications cover single-cylinder, three-cylinder and four-cylinder engine configurations with power ratings ranging from 20kW to 44kW. Performance data, components and specifications may vary between standard and turbocharged versions of each model.
John deere z335 e z trak mower (s.n.010001-) service repair technical manual ...fjskekertkskemm
The document provides instructions for removing and installing an engine on a ZTrak mower. It involves disconnecting wiring, fuel lines, belts, and removing mounting bolts. The engine is then installed by reversing these steps and reconnecting all components. Tightening specifications are provided for mounting bolts and other fasteners. Safety cautions are included for fuel, belts, and hot surfaces.
John deere power tech 10.5l diesel base engine service repair technical manua...fjskekertkskemm
This document provides instructions to remove a cylinder head from a CTM100 diesel engine. The steps include:
1. Draining oil and coolant from the engine.
2. Removing the intake manifold, turbocharger, and exhaust manifold.
3. Removing the thermostat housing/water manifold.
4. Removing the rocker arm assembly and push rods.
5. Removing the cylinder head bolts and lifting off the cylinder head.
John deere 326 d skid steer loader (manual controls) service repair manual (t...fjskekertkskemm
This document provides instructions for disassembling and assembling a track adjuster cylinder. It describes how to safely remove the recoil spring and disassemble the cylinder components like seals and rods. Precautions are outlined to prevent damage to parts. The proper process for cleaning, inspecting, and reinstalling components in reverse order is described. Torque specifications and measurements are provided for correctly assembling and adjusting the cylinder.
John deere 107 s lawn tractor service repair technical manual (tm113319)fjskekertkskemm
This technical manual provides instructions for servicing X105, X125, X145, X165, and 107S Tractors. It begins with several pages emphasizing safety, including warnings about handling batteries, preventing acid burns, avoiding fires, and following other precautions. The document explains that the manual is divided into repair and operation/testing sections and provides fundamental service information.
John deere 92 h riding lawn tractor service repair technical manual (tm113419)fjskekertkskemm
The document provides instructions to remove and install a single cylinder engine on X115R, X135R, X155R, 92H, and 107H tractors. The key steps include:
1. Disconnecting wiring, removing the drive belt, fuel lines, and mounting bolts to remove the engine.
2. Reversing the removal steps to install the engine, including reconnecting wiring and fuel lines and securing with mounting bolts.
3. Removing the cylinder head requires taking off additional parts like the valve cover, rocker arms, and push rods before removing the head and gasket.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix mln) service ...fjskekertkskemm
1. The document provides instructions for removing and installing various components of the front gear group for a Caterpillar D8T track-type tractor powered by a C15 engine.
2. The removal procedure describes removing components like the front cover, front housing, air compressor, and water pump before removing the front gear group.
3. Special tools are listed and safety notices are provided, such as not turning the crankshaft or camshaft when the camshaft gear is removed to avoid interference and engine damage.
The document provides instructions for removing and installing the front suspension frame on a 740 Ejector Articulated Truck. It describes using tools like air/hydraulic jacks, lever pullers, and bolts to remove components like brackets, collars, and washers from the suspension frame. It then gives the reverse steps for installing these components, ensuring proper torque of bolts and use of grease. Safety precautions are provided to relieve pressure before working on cylinders and to use lifting equipment properly due to component weights of around 250 kg.
The document provides instructions for removing and installing a gear pump used in an aftercooler system on a 740 Articulated Truck. The removal process involves disconnecting hoses from the pump, removing bolts securing it, and removing an O-ring seal. The installation is the reverse of removal, including cleaning parts, lubricating seals, aligning the pump splines, and reconnecting hoses.
The document provides instructions for assembling and disassembling a piston pump used in articulated trucks. It involves 26 steps to assemble the pump, including installing retaining rings, seals, bearings, springs, pins and other components in the proper order and orientation. Disassembly of the secondary steering pump and electric motor is also described and involves removing hoses, cables, covers and bolts to detach the pump unit.
Caterpillar cat 320 n excavator (prefix 9wg) service repair manual (9wg00001 ...fjskekertkskemm
This document provides instructions for removing a unit injector from an excavator engine. It begins by requiring the removal of the rocker shaft and pushrods. Then it describes using a bar to compress the unit injector springs and slide the injector out of the cylinder head. Contaminants are warned against as they can cause rapid wear. The document is part of a service manual for excavator models 320, 320L, and 320N.
Caterpillar cat 320 l excavator (prefix 9wg) service repair manual (9wg00001 ...fjskekertkskemm
This document provides instructions for removing a unit injector from an excavator engine. It begins by requiring the removal of the rocker shaft and pushrods. Then it describes using a bar to compress the unit injector springs and slide the injector out of the cylinder head. Contaminants are warned against as they can cause rapid wear. The document is part of a service manual for excavator models 320, 320L, and 320N.
Caterpillar cat 320 e rr excavator (prefix mew) service repair manual (mew000...fjskekertkskemm
This document provides instructions for removing and installing the front gear group on a Caterpillar C6.6 engine. The removal procedure involves using tools to lock the crankshaft, camshaft and fuel injection pump in position before removing gears. The installation procedure specifies cleaning and inspecting parts, aligning timing marks on gears, checking backlash and end play, and torquing bolts to the specified values. Proper positioning of the crankshaft is emphasized to avoid piston and valve interference.
Caterpillar cat 320 e lrr excavator (prefix mew) service repair manual (mew00...fjskekertkskemm
The document provides instructions for removing and installing the front gear group on a 320E LRR excavator. Key steps include:
1. Locking the crankshaft, camshaft, and fuel injection pump in position using timing pins before removing components.
2. Marking gear alignments and removing the camshaft and idler gears.
3. Cleaning and inspecting components, installing gears in reverse order while aligning timing marks, and checking backlash and end play.
4. Locking components, tightening fasteners to specification, and positioning the valve mechanism after installation is complete.
This document provides instructions for installing a governor on an excavator engine. It outlines the required tools and parts. The instructions describe applying lubricant to O-rings, placing the governor in position, and installing clips and bolts to hold it in place. Finally, it mentions checking the fuel setting adjustment after installation and installing the fuel shutoff solenoid.
This document provides disassembly instructions for the piston pump of a 252B3 skid steer loader. It lists 69 steps to fully disassemble the pump, removing components like fittings, springs, seals, bearings, shafts and housings. Measurement and marking steps are included to aid reassembly. Tools required include rulers, retaining ring pliers, link brackets, bolts and washers, drivers, bearing pullers and presses. Safety warnings are given to release spring forces carefully.
This document provides instructions for removing and installing the flywheel, flywheel housing, crankshaft rear seal, and crankshaft pulley on a 3034 engine. The procedures describe using various tools to remove bolts, drilling holes, inserting slide hammers, cleaning surfaces, applying gasket maker, and torquing bolts. Precautions are provided to keep parts clean and prevent damage.
Case ih steiger 500 qt tractor service repair manual [zcf100001 ]fjskekertkskemm
This document is a service manual for Steiger tractors models 350, 400, 450, 500, 550, and 600 and Quadtrac models 450, 500, 550, and 600. It contains safety information and instructions for servicing various components of the tractors, including the engine, transmission, axles, brakes, hydraulics, steering, wheels, tracks, cab, electrical systems, and other parts. The manual is divided into sections covering each major system.
Case ih steiger 450 tractor service repair manual [zdf100001 ]fjskekertkskemm
This document is a service manual for Steiger tractors models 350, 400, 450, 500, 550, and 600 and Quadtrac models 450, 500, 550, and 600. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Safety rules and an introduction are provided.
Case ih quantum 80 f tractor service repair manual (pin zflk00441 and above)fjskekertkskemm
This document is a service manual that contains information on systems for Case IH Quantum tractors, including the engine, transmission, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, and electrical systems. It provides maintenance and repair instructions for technicians and is intended to assist with servicing the tractors. The manual includes diagrams, part numbers, and specifications for various components.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Kubota v2403 m-di-t diesel engine service repair manualfjskekertkskemm
This document provides specifications for several Kubota diesel engine models. It includes information on displacement, power output, operating speed, lubrication system, cooling system, dimensions, weight and other technical details. The specifications cover single-cylinder, three-cylinder and four-cylinder engine configurations with power ratings ranging from 20kW to 44kW. Performance data, components and specifications may vary between standard and turbocharged versions of each model.
John deere z335 e z trak mower (s.n.010001-) service repair technical manual ...fjskekertkskemm
The document provides instructions for removing and installing an engine on a ZTrak mower. It involves disconnecting wiring, fuel lines, belts, and removing mounting bolts. The engine is then installed by reversing these steps and reconnecting all components. Tightening specifications are provided for mounting bolts and other fasteners. Safety cautions are included for fuel, belts, and hot surfaces.
John deere power tech 10.5l diesel base engine service repair technical manua...fjskekertkskemm
This document provides instructions to remove a cylinder head from a CTM100 diesel engine. The steps include:
1. Draining oil and coolant from the engine.
2. Removing the intake manifold, turbocharger, and exhaust manifold.
3. Removing the thermostat housing/water manifold.
4. Removing the rocker arm assembly and push rods.
5. Removing the cylinder head bolts and lifting off the cylinder head.
John deere 326 d skid steer loader (manual controls) service repair manual (t...fjskekertkskemm
This document provides instructions for disassembling and assembling a track adjuster cylinder. It describes how to safely remove the recoil spring and disassemble the cylinder components like seals and rods. Precautions are outlined to prevent damage to parts. The proper process for cleaning, inspecting, and reinstalling components in reverse order is described. Torque specifications and measurements are provided for correctly assembling and adjusting the cylinder.
John deere 107 s lawn tractor service repair technical manual (tm113319)fjskekertkskemm
This technical manual provides instructions for servicing X105, X125, X145, X165, and 107S Tractors. It begins with several pages emphasizing safety, including warnings about handling batteries, preventing acid burns, avoiding fires, and following other precautions. The document explains that the manual is divided into repair and operation/testing sections and provides fundamental service information.
John deere 92 h riding lawn tractor service repair technical manual (tm113419)fjskekertkskemm
The document provides instructions to remove and install a single cylinder engine on X115R, X135R, X155R, 92H, and 107H tractors. The key steps include:
1. Disconnecting wiring, removing the drive belt, fuel lines, and mounting bolts to remove the engine.
2. Reversing the removal steps to install the engine, including reconnecting wiring and fuel lines and securing with mounting bolts.
3. Removing the cylinder head requires taking off additional parts like the valve cover, rocker arms, and push rods before removing the head and gasket.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix mln) service ...fjskekertkskemm
1. The document provides instructions for removing and installing various components of the front gear group for a Caterpillar D8T track-type tractor powered by a C15 engine.
2. The removal procedure describes removing components like the front cover, front housing, air compressor, and water pump before removing the front gear group.
3. Special tools are listed and safety notices are provided, such as not turning the crankshaft or camshaft when the camshaft gear is removed to avoid interference and engine damage.
The document provides instructions for removing and installing the front suspension frame on a 740 Ejector Articulated Truck. It describes using tools like air/hydraulic jacks, lever pullers, and bolts to remove components like brackets, collars, and washers from the suspension frame. It then gives the reverse steps for installing these components, ensuring proper torque of bolts and use of grease. Safety precautions are provided to relieve pressure before working on cylinders and to use lifting equipment properly due to component weights of around 250 kg.
The document provides instructions for removing and installing a gear pump used in an aftercooler system on a 740 Articulated Truck. The removal process involves disconnecting hoses from the pump, removing bolts securing it, and removing an O-ring seal. The installation is the reverse of removal, including cleaning parts, lubricating seals, aligning the pump splines, and reconnecting hoses.
The document provides instructions for assembling and disassembling a piston pump used in articulated trucks. It involves 26 steps to assemble the pump, including installing retaining rings, seals, bearings, springs, pins and other components in the proper order and orientation. Disassembly of the secondary steering pump and electric motor is also described and involves removing hoses, cables, covers and bolts to detach the pump unit.
Caterpillar cat 320 n excavator (prefix 9wg) service repair manual (9wg00001 ...fjskekertkskemm
This document provides instructions for removing a unit injector from an excavator engine. It begins by requiring the removal of the rocker shaft and pushrods. Then it describes using a bar to compress the unit injector springs and slide the injector out of the cylinder head. Contaminants are warned against as they can cause rapid wear. The document is part of a service manual for excavator models 320, 320L, and 320N.
Caterpillar cat 320 l excavator (prefix 9wg) service repair manual (9wg00001 ...fjskekertkskemm
This document provides instructions for removing a unit injector from an excavator engine. It begins by requiring the removal of the rocker shaft and pushrods. Then it describes using a bar to compress the unit injector springs and slide the injector out of the cylinder head. Contaminants are warned against as they can cause rapid wear. The document is part of a service manual for excavator models 320, 320L, and 320N.
Caterpillar cat 320 e rr excavator (prefix mew) service repair manual (mew000...fjskekertkskemm
This document provides instructions for removing and installing the front gear group on a Caterpillar C6.6 engine. The removal procedure involves using tools to lock the crankshaft, camshaft and fuel injection pump in position before removing gears. The installation procedure specifies cleaning and inspecting parts, aligning timing marks on gears, checking backlash and end play, and torquing bolts to the specified values. Proper positioning of the crankshaft is emphasized to avoid piston and valve interference.
Caterpillar cat 320 e lrr excavator (prefix mew) service repair manual (mew00...fjskekertkskemm
The document provides instructions for removing and installing the front gear group on a 320E LRR excavator. Key steps include:
1. Locking the crankshaft, camshaft, and fuel injection pump in position using timing pins before removing components.
2. Marking gear alignments and removing the camshaft and idler gears.
3. Cleaning and inspecting components, installing gears in reverse order while aligning timing marks, and checking backlash and end play.
4. Locking components, tightening fasteners to specification, and positioning the valve mechanism after installation is complete.
This document provides instructions for installing a governor on an excavator engine. It outlines the required tools and parts. The instructions describe applying lubricant to O-rings, placing the governor in position, and installing clips and bolts to hold it in place. Finally, it mentions checking the fuel setting adjustment after installation and installing the fuel shutoff solenoid.
This document provides disassembly instructions for the piston pump of a 252B3 skid steer loader. It lists 69 steps to fully disassemble the pump, removing components like fittings, springs, seals, bearings, shafts and housings. Measurement and marking steps are included to aid reassembly. Tools required include rulers, retaining ring pliers, link brackets, bolts and washers, drivers, bearing pullers and presses. Safety warnings are given to release spring forces carefully.
This document provides instructions for removing and installing the flywheel, flywheel housing, crankshaft rear seal, and crankshaft pulley on a 3034 engine. The procedures describe using various tools to remove bolts, drilling holes, inserting slide hammers, cleaning surfaces, applying gasket maker, and torquing bolts. Precautions are provided to keep parts clean and prevent damage.
Case ih steiger 500 qt tractor service repair manual [zcf100001 ]fjskekertkskemm
This document is a service manual for Steiger tractors models 350, 400, 450, 500, 550, and 600 and Quadtrac models 450, 500, 550, and 600. It contains safety information and instructions for servicing various components of the tractors, including the engine, transmission, axles, brakes, hydraulics, steering, wheels, tracks, cab, electrical systems, and other parts. The manual is divided into sections covering each major system.
Case ih steiger 450 tractor service repair manual [zdf100001 ]fjskekertkskemm
This document is a service manual for Steiger tractors models 350, 400, 450, 500, 550, and 600 and Quadtrac models 450, 500, 550, and 600. It contains sections covering the engine, transmission, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, and electrical systems. Safety rules and an introduction are provided.
Case ih quantum 80 f tractor service repair manual (pin zflk00441 and above)fjskekertkskemm
This document is a service manual that contains information on systems for Case IH Quantum tractors, including the engine, transmission, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, and electrical systems. It provides maintenance and repair instructions for technicians and is intended to assist with servicing the tractors. The manual includes diagrams, part numbers, and specifications for various components.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Real-time driver monitoring is one of the easiest ways to make fleet management efficient as well as seamless. Connected vehicle solutions such as fleet GPS trackers and associated software help businesses in several ways. Refer to the post below for more details.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
8. INTRODUCTION
Foreword - Important notice regarding equipment servicing
STEIGER®
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE IH Sales and Service Networks.
47924544 29/09/2015
3
9. INTRODUCTION
Safety rules
STEIGER®
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47924544 29/09/2015
4
10. INTRODUCTION
Safety rules - Ecology and the environment
STEIGER®
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. CASE IH
strongly recommends that you return all used batteries to a CASE IH dealer, who will
dispose of the used batteries or recycle the used batteries properly. In some countries,
this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
47924544 29/09/2015
5
12. Engine - Engine and crankcase
Engine - Change fluid - Changing engine oil and filter
STEIGER®
NOTE: Reduce to 300 hours or less if CASE IH AKCELA UNITEK NO. 1™ SBL CJ-4 is not used.
Change the engine oil and filter every 600 hours or once
a year or before storage, whichever occurs first. Your
dealer has approved oil and filters. Do not use other
types of oil or filters.
NOTE: For best results change the oil and filter while the
engine is still warm to the touch from operation (not hot).
The tractor must be on a level surface.
Remove the engine side shields.
9L engine
1. Remove the oil pan drain plug and drain the oil from the
engine into a container.
2. After all oil has drained, install new washer 98474302
on drain plug, center washer on plug and install drain
plug. Torque drain plug to 30 N·m (22 lb ft).
3. Clean the area around the filter head and housing on
the left side of the engine. Place a container under the
oil filter and turn the filter housing counterclockwise to
loosen with a 51 mm (2 in) wrench. After all oil has
drained from the filter, remove the housing with filter.
RAIL13TR04406AA 1
4. Install the new filter cartridge and O-ring. Lightly oil new
O-ring.
4. Reinstall the filter assembly onto the tractor. Do not
over tighten or O-ring will leak.
RCPH10FWD928BAM 2
47924544 29/09/2015
10.1 [10.001] / 3
13. Engine - Engine and crankcase
5. Fill with new oil into the engine oil fill (1).
NOTE: Total oil refill capacity will be determined by how
completely the crankcase drains. Do not fill above the high
mark on the dipstick (2) when refilling.
6. Operate the engine for five minutes at 1000 RPM.
Check for oil leaks at the filter base and drain plug.
7. Stop the engine. Wait approximately five minutes for
the oil to return to the oil pan. Check the oil level on the
dipstick (2) and add oil if needed.
RAIL13TR04406AA 3
13L engines
1. Remove the oil pan drain plug and drain the oil from the
engine into a container.
2. After all oil has drained, install new washer 98474302
on drain plug, center washer on plug and install drain
plug. Torque drain plug to 30 N·m (22 lb ft).
3. Place a container under the oil filter on the left side of
the engine. Use a 19 mm (0.75 in) socket to open drain
on bottom of housing. This will allow oil to drain from
the housing. After oil is drained, turn the filter housing
counterclockwise to loosen with a 51 mm (2 in) wrench
and remove the filter housing.
RAIL14TR00085AA 4
4. Install the new filter cartridge and O-ring.
4. Reinstall the filter assembly. Do not over tighten or the
O-ring will leak.
RCPH10FWD928BAM 5
47924544 29/09/2015
10.1 [10.001] / 4
14. Engine - Engine and crankcase
5. Fill with new oil into the engine oil fill (1).
NOTE: Total oil refill capacity will be determined by how
completely the crankcase drains. Do not fill above the high
mark on the dipstick (2) when refilling.
6. Operate the engine for five minutes at 1000 RPM.
Check for oil leaks at the filter base and drain plug.
7. Stop the engine. Wait approximately five minutes for
the oil to return to the oil pan. Check the oil level on the
dipstick (2) and add oil if needed.
RAIL13TR01857AA 6
47924544 29/09/2015
10.1 [10.001] / 5
15. Engine - Engine and crankcase
Engine - Remove - 9L
Steiger® 370
Prior operation:
Hood support - Remove – Row crop frame, 9L engine (90.102)
1. Disconnect the driveshaft from the engine.
RAIL13TR02967AA 1
2. Label and disconnect the heater hoses from the tubes.
NOTE: Plug and cap all disconnected hoses and tubes.
RAIL13TR02966AA 2
3. Label and disconnect the two hoses for the diesel emis-
sions fluid tank solenoid.
RAIL13TR02969AA 3
47924544 29/09/2015
10.1 [10.001] / 6
16. Engine - Engine and crankcase
4. Loosen the hose clamp (1) at the turbo.
5. Remove the air intake tube (2) from the engine.
RAIL13TR03051AA 4
6. Disconnect the power cable (1) from the starter.
7. Disconnect the wire (2) from the starter.
8. Remove the bolt (3) and disconnect the ground strap
from the engine block.
RAIL13TR02970AA 5
9. Remove the left hand charged air cooler tube.
NOTE: Plug and cap disconnected tubes and ports.
RAIL13TR02978AA 6
47924544 29/09/2015
10.1 [10.001] / 7
17. Engine - Engine and crankcase
10. Disconnect the lower radiator hose at the engine.
RAIL13TR02971AA 7
11. Attach a support strap to the cooling package frame
and the chassis frame as shown to support the cooling
package.
RAIL13TR02973AA 8
12. Remove the right hand charged air cooler tube.
RAIL13TR02972AA 9
47924544 29/09/2015
10.1 [10.001] / 8
18. Engine - Engine and crankcase
13. Remove the clamp (1) securing the upper radiator
tube to the bracket on the engine.
14. Remove the upper radiator tube (2).
RAIL13TR02974AA 10
15. Cut the ties securing the harness and disconnect the
harness.
RAIL13TR02976AA 11
16. Loosen the viscous drive from the shaft.
NOTE: The fan pulley hub is left handed threaded.
RAIL13TR02979AA 12
47924544 29/09/2015
10.1 [10.001] / 9
19. Engine - Engine and crankcase
17. With the help of an assistant remove the fan out the
right hand side of the machine.
RAIL13TR02977AA 13
18. Disconnect the harness lead to the air conditioner high
pressure switch (1) and the clutch activation lead (2) .
RAIL13TR02981AA 14
19. Use a breaker bar to relieve the tension on the serpen-
tine belt and remove the belt from the air conditioner
compressor pulley.
RAIL13TR02987AA 15
47924544 29/09/2015
10.1 [10.001] / 10
20. Engine - Engine and crankcase
20. Support the compressor and remove the four mount-
ing bolts.
RAIL13TR02986AA 16
21. Set the compressor on the right hand front tire and
secure with holding straps as shown.
RAIL13TR02982AA 17
22. Disconnect the power cable (1) from the alternator.
23. Disconnect the exciter wire (2) from the alternator.
RAIL13TR02983AA 18
47924544 29/09/2015
10.1 [10.001] / 11
21. Engine - Engine and crankcase
24. Disconnect the harness (1).
25. Remove the bolt (2) securing the harness to the en-
gine block.
RAIL13TR02985AA 19
26. Unplug the connector (1).
27. Disconnect the main harness (2) from the engine con-
troller.
28. Disconnect the cable (3) from the junction box.
29. Cut the tie (4) securing the harness and cable to-
gether.
30. Move the harness (5) out from behind the junction box
and the engine to stay with the chassis during the
engine removal.
RAIL13TR02988AA 20
31. Remove the nut and bolt (1) securing the cable to the
bracket.
32. Remove the bolts (2) securing the bracket to the en-
gine block.
RAIL13TR02984AA 21
47924544 29/09/2015
10.1 [10.001] / 12
22. Engine - Engine and crankcase
33. Remove the bolt (1) securing the harness to the en-
gine block.
34. Disconnect the fuel inlet hose (2).
NOTE: Plug and cap all disconnected fuel hoses and fit-
tings.
RAIL13TR02993AA 22
35. Disconnect the fuel return hose.
RAIL13TR02991AA 23
36. Remove the right and left hand hold down brackets.
NOTE: Left hand side is shown. Remove both sides.
RAIL13TR02989AA 24
47924544 29/09/2015
10.1 [10.001] / 13
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Engine - Engine and crankcase
37. Remove the front hold down bracket.
RAIL13TR02994AA 25
38. Attach the 4130 load rotor lifting bale or equivalent to
overhead crane and engine lift brackets.
NOTE: The engine lifting brackets are for vertical lifting
only. Any lifting device that is not vertically in line with the
lifting brackets can damage the engine rocker arm cover or
cause bracket failure.
RAIL13TR02992AA 26
39. Remove the engine.
RAIL13TR02990AA 27
47924544 29/09/2015
10.1 [10.001] / 14
25. Engine - Engine and crankcase
Engine - Install - 9L
Steiger® 370
1. Set the engine in place on the chassis.
NOTE: The engine lifting brackets are for vertical lifting
only. Any lifting device that is not vertically in line with the
lifting brackets can damage the engine rocker arm cover or
cause bracket failure.
RAIL13TR02990AA 1
2. Remove the 4130 load rotor lifting bale or equivalent
from the engine lift brackets.
RAIL13TR02992AA 2
3. Install the front hold down bracket.
4. Torque the lower engine mount to frame bolts (1) to 90
- 107 N·m (66 - 79 lb ft).
5. Torque the ISO mount nut and bolt to 160 - 220 N·m
(118 - 162 lb ft).
RAIL13TR02994AA 3
47924544 29/09/2015
10.1 [10.001] / 15
26. Engine - Engine and crankcase
6. Install the right and left hand hold down brackets.
NOTE: Left hand side is shown. Install both sides.
7. Torque the bolts to 125 - 150 N·m (92 - 111 lb ft).
RAIL13TR02989AA 4
8. Connect the fuel return hose.
NOTE: Remove the plugs and caps from the disconnected
fuel hoses and fittings.
RAIL13TR02991AA 5
9. Route the harness and secure to the engine block with
the original bolt (1).
10. Connect the fuel inlet hose (2).
RAIL13TR02993AA 6
47924544 29/09/2015
10.1 [10.001] / 16