This document is a service manual for Case IH MAXXUM tractors that provides specifications, diagrams, and procedures for maintenance and repair of components. It covers the MAXXUM 115, 125, 135, 145, 150, CVT 115, CVT 125, CVT 135, and CVT 145 tractors and their engines, transmissions, hydraulics, electrical systems, and other parts. The manual is divided into sections on different vehicle systems for easy reference to technical data, diagnostics, and repair instructions.
Case ih maxxum cvt 145 tier 4 b (final) tractor service repair manualfujsjefksekmfm
This document is a service manual for MAXXUM tractors that provides technical information on the tractor systems and components. It includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, and electrical systems. Each section contains technical specifications, operational descriptions, diagnostic codes, and service procedures. The manual is intended to support maintenance and repair of MAXXUM tractors by qualified dealership personnel.
Case ih maxxum 125 tier 4 b (final) tractor service repair manualfujsekfksmemer
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and attachments. The manual provides maintenance and repair instructions for technicians working on MAXXUM 115, 125, 135, 145, and 150 models.
Case ih maxxum 150 tier 4 b (final) tractor service repair manualfjjskekmsemm
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and attachments. The manual provides maintenance and repair instructions for technicians working on MAXXUM 115, 125, 135, 145, and 150 models.
Case ih maxxum cvt 135 tier 4 b (final) tractor service repair manualfjskeksemm
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and more. Each section provides detailed descriptions and part numbers for maintenance and repair of the various tractor parts and subsystems.
Case ih maxxum cvt 125 tier 4 b (final) tractor service repair manualfjsefksemmm
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and more. Each section provides detailed descriptions and part numbers for maintenance and repair of the various tractor parts and subsystems.
Case ih maxxum 135 multicontroller tier 4 b (final) tractor service repair ma...fujsekfksmemer
This document is a service manual for MAXXUM tractors that provides information on maintenance, repair, and troubleshooting. It contains sections covering the engine, transmission, hydraulics, electrical systems, and other components. Each section includes technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual is intended for use by qualified service technicians and mechanics.
Case ih maxxum cvt 115 tier 4 b (final) tractor service repair manualfjjksekfksmem
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and attachments. The manual provides maintenance and repair instructions for technicians working on MAXXUM 115, 125, 135, 145, and 150 models.
Case ih maxxum cvt 145 tier 4 b (final) tractor service repair manualfjskekxswesemm
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and more. Each section provides detailed descriptions and part numbers for maintenance and repair of the various tractor parts and subsystems.
Case ih maxxum cvt 145 tier 4 b (final) tractor service repair manualfujsjefksekmfm
This document is a service manual for MAXXUM tractors that provides technical information on the tractor systems and components. It includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, and electrical systems. Each section contains technical specifications, operational descriptions, diagnostic codes, and service procedures. The manual is intended to support maintenance and repair of MAXXUM tractors by qualified dealership personnel.
Case ih maxxum 125 tier 4 b (final) tractor service repair manualfujsekfksmemer
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and attachments. The manual provides maintenance and repair instructions for technicians working on MAXXUM 115, 125, 135, 145, and 150 models.
Case ih maxxum 150 tier 4 b (final) tractor service repair manualfjjskekmsemm
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and attachments. The manual provides maintenance and repair instructions for technicians working on MAXXUM 115, 125, 135, 145, and 150 models.
Case ih maxxum cvt 135 tier 4 b (final) tractor service repair manualfjskeksemm
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and more. Each section provides detailed descriptions and part numbers for maintenance and repair of the various tractor parts and subsystems.
Case ih maxxum cvt 125 tier 4 b (final) tractor service repair manualfjsefksemmm
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and more. Each section provides detailed descriptions and part numbers for maintenance and repair of the various tractor parts and subsystems.
Case ih maxxum 135 multicontroller tier 4 b (final) tractor service repair ma...fujsekfksmemer
This document is a service manual for MAXXUM tractors that provides information on maintenance, repair, and troubleshooting. It contains sections covering the engine, transmission, hydraulics, electrical systems, and other components. Each section includes technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual is intended for use by qualified service technicians and mechanics.
Case ih maxxum cvt 115 tier 4 b (final) tractor service repair manualfjjksekfksmem
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and attachments. The manual provides maintenance and repair instructions for technicians working on MAXXUM 115, 125, 135, 145, and 150 models.
Case ih maxxum cvt 145 tier 4 b (final) tractor service repair manualfjskekxswesemm
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and more. Each section provides detailed descriptions and part numbers for maintenance and repair of the various tractor parts and subsystems.
Case ih maxxum 125 tier 4 b (final) tractor service repair manualfujsekksmem
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for maintenance and repair. The manual aims to provide technicians with the essential information needed to service MAXXUM tractors.
Case ih maxxum 150 multicontroller tier 4 b (final) tractor service repair ma...fjskefkemms
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual is intended for use by qualified service technicians and mechanics.
Case ih maxxum 135 multicontroller tier 4 b (final) tractor service repair ma...fujsefkskemm
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal, installation and adjustment of parts. The manual is intended for use by qualified service technicians when performing maintenance and repairs.
Case ih maxxum 135 tier 4 b (final) tractor service repair manualfjjskkemsmee
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and more. Each section provides detailed descriptions and part numbers for maintenance and repair of the various tractor parts and subsystems.
Case ih maxxum 135 tier 4 b (final) tractor service repair manualfjjsekkksmeik
This document is a service manual for MAXXUM tractors that provides information on maintenance, repair, and troubleshooting. It contains sections covering the engine, transmission, hydraulics, electrical systems, and other components. Each section includes technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual is intended for use by qualified service technicians and mechanics.
Case ih maxxum 125 multicontroller tier 4 b (final) tractor service repair ma...fujsekksmem
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual aims to provide technicians with the essential information needed to service and repair the tractors.
Case ih maxxum 125 multicontroller tier 4 b (final) tractor service repair ma...fujsekfksmemer
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual aims to provide technicians with the essential information needed to service and repair the tractors.
Case ih maxxum 145 tier 4 b (final) tractor service repair manualfkjsekksmem
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual aims to provide technicians with the essential information needed to service and repair the tractors.
Case ih maxxum 115 multicontroller tier 4 b (final) tractor service repair ma...fjjsekkksmeik
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal, installation and adjustment of parts. The manual is intended for use by qualified service technicians when performing maintenance and repairs.
Case ih maxxum 115 tier 4 b (final) tractor service repair manualfjjsekkksmeik
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of how systems work, diagnostic codes and troubleshooting guides, and procedures for removal, installation and adjustment of components. The manual uses a coding system to organize information and link it to other product support functions.
Case ih puma 200 cvx tractor service repair manualfujskksemmk
This document is a service manual for Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX tractors. It contains information on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The manual provides part numbers and repair instructions for components of each system.
Case ih puma 185 cvx tractor service repair manualfujjdfjkksekmem
This document provides a service manual for Puma tractors, including the Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX models. The manual contains an introduction on how to use the manual and navigate its contents. The contents section lists all systems covered in the manual such as the engine, transmission, hydraulics, electrical systems, and more. Each system section contains technical data, functional descriptions, diagnostics, and service procedures.
Case ih puma 185 cvx tractor service repair manualfujskekfksmem
This document is a service manual for Puma tractor models 170 CVX, 185 CVX, 200 CVX, 215 CVX, and 230 CVX. It contains over 50 sections covering all major tractor systems, including the engine, transmission, hydraulics, pneumatics, steering, brakes, electrical systems, and more. Each section provides detailed information, component locations, and repair procedures for the parts and subsystems within that section.
Case ih puma 185 tractor service repair manualfujjdfjkksekmem
This document provides a service manual for Puma tractors, including the Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX models. The manual contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Each section includes technical data, functional descriptions, diagnostic information, and service procedures for the components in that system.
Case ih puma 185 tractor service repair manualfuekdksmemm
This document provides a service manual for Puma tractors, including the Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX models. The manual contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Each section includes technical data, functional descriptions, diagnostics, and service procedures for the various components.
Case ih puma 170 tractor service repair manualufujjdjkskemme
This document provides a service manual for Puma tractors, including the Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX models. The manual contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Each section includes technical data, functional descriptions, diagnostic information, and service procedures for the components in that system.
Case ih maxxum cvt 135 tier 4 b (final) tractor service repair manualfujsjfjkskkem
This document is a service manual for MAXXUM tractors that provides technical information on the tractor systems and components. It includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, and electrical systems. Each section contains technical specifications, operational descriptions, diagnostic codes, and service procedures. The manual is intended to support maintenance and repair of MAXXUM tractors by qualified dealership personnel.
Case ih maxxum 115 multicontroller ep tier 4 a tractor service repair manualfujsjfjkskkem
This document is a service manual for Case IH Maxxum tractors covering models MAXXUM 110 EP through MAXXUM 140 EP and MAXXUM CVT 110 through MAXXUM CVT 130. The manual contains specifications, diagrams, and repair procedures for the engine, transmission, hydraulics, electrical systems, and other components. It is intended as a reference for technicians servicing these tractor models.
Case ih maxxum 115 ep tier 4 a tractor service repair manualfujsjfjkskkem
This document is a service manual for Case IH Maxxum tractors that provides information on the tractor systems, components, and specifications. It contains sections covering the engine, transmission, hydraulics, steering, brakes, cab climate control, and electrical systems. Each section includes subsections that describe the components, operation, and servicing of individual tractor systems and parts.
Case ih magnum 340 powershift transmission (pst) tier 4 b tractor service rep...fujsjfjkskkem
This document is a service manual for Case IH Magnum tractors that provides specifications and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, and other components. It includes over 50 sections covering topics like the powertrain, steering, brakes, climate control, and hitches. The manual is intended to assist technicians in servicing and repairing Case IH Magnum 250, 280, 310, 340, and Rowtrac tractors.
Case ih magnum 310 rowtrac pst tier 4 b tractor service repair manual [zhrf04...fujsjfjkskkem
This document provides information about properly testing tractor engines and power take-off performance using a dynamometer. It notes that dynamometer testing must account for various environmental and fuel-related factors that can affect engine power output. A standard test procedure should be followed to ensure accurate and consistent results for comparison over time. The power and torque readings obtained may be lower than advertised specifications depending on equipment and test conditions.
Case ih magnum 310 pst tier 4 b tractor service repair manual [zhrf04001 ]fujsjfjkskkem
This document provides information about properly testing tractor engines and power take-off performance using a dynamometer. It notes that dynamometer testing must account for various environmental and fuel-related factors that can affect engine power output. A standard test procedure should be followed to ensure accurate and consistent dynamometer results that can be used for future comparison purposes.
More Related Content
Similar to Case ih maxxum cvt 145 tier 4 b (final) tractor service repair manual
Case ih maxxum 125 tier 4 b (final) tractor service repair manualfujsekksmem
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for maintenance and repair. The manual aims to provide technicians with the essential information needed to service MAXXUM tractors.
Case ih maxxum 150 multicontroller tier 4 b (final) tractor service repair ma...fjskefkemms
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual is intended for use by qualified service technicians and mechanics.
Case ih maxxum 135 multicontroller tier 4 b (final) tractor service repair ma...fujsefkskemm
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal, installation and adjustment of parts. The manual is intended for use by qualified service technicians when performing maintenance and repairs.
Case ih maxxum 135 tier 4 b (final) tractor service repair manualfjjskkemsmee
This document is a service manual for MAXXUM tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, hydraulics, steering, electrical systems, climate control, hitches and more. Each section provides detailed descriptions and part numbers for maintenance and repair of the various tractor parts and subsystems.
Case ih maxxum 135 tier 4 b (final) tractor service repair manualfjjsekkksmeik
This document is a service manual for MAXXUM tractors that provides information on maintenance, repair, and troubleshooting. It contains sections covering the engine, transmission, hydraulics, electrical systems, and other components. Each section includes technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual is intended for use by qualified service technicians and mechanics.
Case ih maxxum 125 multicontroller tier 4 b (final) tractor service repair ma...fujsekksmem
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual aims to provide technicians with the essential information needed to service and repair the tractors.
Case ih maxxum 125 multicontroller tier 4 b (final) tractor service repair ma...fujsekfksmemer
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual aims to provide technicians with the essential information needed to service and repair the tractors.
Case ih maxxum 145 tier 4 b (final) tractor service repair manualfkjsekksmem
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal and installation of parts. The manual aims to provide technicians with the essential information needed to service and repair the tractors.
Case ih maxxum 115 multicontroller tier 4 b (final) tractor service repair ma...fjjsekkksmeik
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of operation, diagnostic codes, and procedures for removal, installation and adjustment of parts. The manual is intended for use by qualified service technicians when performing maintenance and repairs.
Case ih maxxum 115 tier 4 b (final) tractor service repair manualfjjsekkksmeik
This document is a service manual for MAXXUM tractors that provides information on maintenance and repair of the tractor's systems and components. It includes sections covering the engine, transmission, hydraulics, electrical systems, cab climate control, and other areas. Each section contains technical specifications, descriptions of how systems work, diagnostic codes and troubleshooting guides, and procedures for removal, installation and adjustment of components. The manual uses a coding system to organize information and link it to other product support functions.
Case ih puma 200 cvx tractor service repair manualfujskksemmk
This document is a service manual for Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX tractors. It contains information on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The manual provides part numbers and repair instructions for components of each system.
Case ih puma 185 cvx tractor service repair manualfujjdfjkksekmem
This document provides a service manual for Puma tractors, including the Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX models. The manual contains an introduction on how to use the manual and navigate its contents. The contents section lists all systems covered in the manual such as the engine, transmission, hydraulics, electrical systems, and more. Each system section contains technical data, functional descriptions, diagnostics, and service procedures.
Case ih puma 185 cvx tractor service repair manualfujskekfksmem
This document is a service manual for Puma tractor models 170 CVX, 185 CVX, 200 CVX, 215 CVX, and 230 CVX. It contains over 50 sections covering all major tractor systems, including the engine, transmission, hydraulics, pneumatics, steering, brakes, electrical systems, and more. Each section provides detailed information, component locations, and repair procedures for the parts and subsystems within that section.
Case ih puma 185 tractor service repair manualfujjdfjkksekmem
This document provides a service manual for Puma tractors, including the Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX models. The manual contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Each section includes technical data, functional descriptions, diagnostic information, and service procedures for the components in that system.
Case ih puma 185 tractor service repair manualfuekdksmemm
This document provides a service manual for Puma tractors, including the Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX models. The manual contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Each section includes technical data, functional descriptions, diagnostics, and service procedures for the various components.
Case ih puma 170 tractor service repair manualufujjdjkskemme
This document provides a service manual for Puma tractors, including the Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX models. The manual contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Each section includes technical data, functional descriptions, diagnostic information, and service procedures for the components in that system.
Similar to Case ih maxxum cvt 145 tier 4 b (final) tractor service repair manual (16)
Case ih maxxum cvt 135 tier 4 b (final) tractor service repair manualfujsjfjkskkem
This document is a service manual for MAXXUM tractors that provides technical information on the tractor systems and components. It includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, and electrical systems. Each section contains technical specifications, operational descriptions, diagnostic codes, and service procedures. The manual is intended to support maintenance and repair of MAXXUM tractors by qualified dealership personnel.
Case ih maxxum 115 multicontroller ep tier 4 a tractor service repair manualfujsjfjkskkem
This document is a service manual for Case IH Maxxum tractors covering models MAXXUM 110 EP through MAXXUM 140 EP and MAXXUM CVT 110 through MAXXUM CVT 130. The manual contains specifications, diagrams, and repair procedures for the engine, transmission, hydraulics, electrical systems, and other components. It is intended as a reference for technicians servicing these tractor models.
Case ih maxxum 115 ep tier 4 a tractor service repair manualfujsjfjkskkem
This document is a service manual for Case IH Maxxum tractors that provides information on the tractor systems, components, and specifications. It contains sections covering the engine, transmission, hydraulics, steering, brakes, cab climate control, and electrical systems. Each section includes subsections that describe the components, operation, and servicing of individual tractor systems and parts.
Case ih magnum 340 powershift transmission (pst) tier 4 b tractor service rep...fujsjfjkskkem
This document is a service manual for Case IH Magnum tractors that provides specifications and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, and other components. It includes over 50 sections covering topics like the powertrain, steering, brakes, climate control, and hitches. The manual is intended to assist technicians in servicing and repairing Case IH Magnum 250, 280, 310, 340, and Rowtrac tractors.
Case ih magnum 310 rowtrac pst tier 4 b tractor service repair manual [zhrf04...fujsjfjkskkem
This document provides information about properly testing tractor engines and power take-off performance using a dynamometer. It notes that dynamometer testing must account for various environmental and fuel-related factors that can affect engine power output. A standard test procedure should be followed to ensure accurate and consistent results for comparison over time. The power and torque readings obtained may be lower than advertised specifications depending on equipment and test conditions.
Case ih magnum 310 pst tier 4 b tractor service repair manual [zhrf04001 ]fujsjfjkskkem
This document provides information about properly testing tractor engines and power take-off performance using a dynamometer. It notes that dynamometer testing must account for various environmental and fuel-related factors that can affect engine power output. A standard test procedure should be followed to ensure accurate and consistent dynamometer results that can be used for future comparison purposes.
Case ih magnum 280 cvt tier 4 b tractor service repair manual [zgrf05001 ]fujsjfjkskkem
This document is a service manual that provides introduction, contents, and maintenance information for various Magnum tractor models and their components. The manual covers systems and components including the engine, transmission, axles, hydraulics, hitches, steering, wheels/tracks, cab climate control, and electrical systems. Specific sections provide maintenance and repair instructions for individual components such as the cylinder heads, fuel injection system, hydraulic pump, rear three-point hitch, and electrical controls.
New holland vn2080 grape harvester service repair manualfujsjfjkskkem
This document contains specifications for a self-propelled grape harvester model VN2080. It includes dimensions, weights, engine specifications, drive details, and braking systems. The harvester comes in two variants, with axle clearances of either 1450mm or 1600mm. Key specifications include a 129kW engine, maximum speeds of 25kph on roads and 14kph in fields, and total weights ranging from 7500kg to 8020kg depending on configuration.
New holland vl5060 grape harvester service repair manualfujsjfjkskkem
This document contains service manual information for various grape harvester models, including specifications. It provides:
- Dimensions such as heights, widths, lengths and ground clearances for models ranging from VL6040 to VL6090 and VM4090.
- Main specifications for these models like engine details, hydraulic system capacities and harvesting equipment specs.
- Dimensional specifications for additional models VL5090, VL5080, VL5060, VM3080, VM3090 and VN2090.
- Details on changes in machine names and numbering systems over different model years.
- Contents listing of the repair manual sections covering various machine systems, components and accessories.
New holland c185 compact track loader service repair manualfujsjfjkskkem
The document is a repair manual for New Holland construction equipment that provides technical information on distribution systems, power production, power train, travelling systems, body and structure, safety features, working arms, tools and couplers. It contains sections on primary and secondary hydraulic power systems, electrical power systems, lighting systems, engines, fuel systems, cooling systems, transmissions, axles, steering systems, wheels and tracks, user controls, environmental controls, and safety accessories. The manual provides technical specifications, descriptions of how systems function, diagnostic information for troubleshooting, and procedures for removing, installing, and adjusting components.
Case ih magnum 260 continuously variable transmission (cvt) tractor service r...fujsjfjkskkem
This document is the service manual for Case IH Magnum tractors models 235, 260, 290, 315, 340, and 370 from 2013. It contains instructions for repair and maintenance of the engine, transmission, axles, hydraulics, pneumatics, electrical systems, cab, and other components. A foreword emphasizes that all repair and maintenance work must only be carried out by qualified dealership personnel strictly following the instructions provided using any special tools whenever possible.
Case ih quadtrac 500 tier 4 b (final) tractor service repair manual pin jeez0...fujsjfjkskkem
This document is a service manual for Case IH Steiger tractors from model years 370 to 620 that meet Tier 4B emissions standards. It contains information on the engine, transmission, axles, brakes, and other components. The manual provides maintenance and repair instructions for technicians servicing these tractors. It is published by Case IH and copyrighted in 2017.
Case ih magnum 200 powershift transmission (pst) tier 4 b tractor service rep...fujsjfjkskkem
The document is a service manual that provides instructions for removing engines from Case IH Magnum tractors, including disconnecting various components like air lines, electrical connections, coolant lines, and diesel exhaust components. It lists the specific tractor models and engines covered and provides detailed steps for safely removing each engine while following all safety precautions. The manual is intended to guide qualified service technicians through engine removal and maintenance.
Case ih quadtrac 500 tier 4 b (final) tractor service repair manual (pin zff3...fujsjfjkskkem
This document is a service manual for Case IH and Steiger tractors that provides information on tractor systems, components, and repair procedures. It includes sections covering the engine, transmission, axles, brakes, hydraulics, electrical systems, and more. Each section breaks down the various subsystems and parts in those areas to enable technicians to service and repair the tractors.
Case ih quadtrac 470 tier 4 b (final) tractor service repair manual (pin zff3...fujsjfjkskkem
This document is a service manual that provides maintenance and repair instructions for various Case IH tractor models including the QuadTrac, RowTrac, and Steiger lines. It contains detailed sections on the tractor engine, power coupling, transmission, front and rear axles, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, tracks and suspensions, cab climate control, electrical systems, and exterior components. The manual aims to guide qualified dealership personnel in properly servicing and repairing components to ensure safety and performance.
Case ih magnum 180 tractor with full powershift transmission service repair m...fujsjfjkskkem
This document is a service manual for Case IH Magnum 180, 190, and 210 tractors with full powershift transmissions. It provides specifications, component descriptions, diagrams, and repair procedures for the tractors' hydraulic, pneumatic, electrical, and electronic systems. Topics covered include the primary hydraulic power system, electro-hydraulic remote valve, electrical power system, electronic system, fault codes, and more. Torque specifications are also provided for working on the tractors.
Case ih puma 125 tractor service repair manualfujsjfjkskkem
This document is a service manual for Case IH PUMA tractors that contains information on the tractor's systems, components, and repair procedures. It includes sections on the tractor's hydraulics, pneumatics, electrics, engine, transmission, axles, brakes, frame, hitch, and troubleshooting codes. The manual is intended to help technicians resolve issues with the tractor's functions and systems.
Case ih puma 115 tractor service repair manualfujsjfjkskkem
This document is a service manual for Case IH PUMA tractors that contains information on the tractor's systems, components, and repair procedures. It includes sections on the tractor's hydraulics, pneumatics, electrics, engine, transmission, axles, brakes, frame, hitch, and troubleshooting codes. The manual is intended to help technicians resolve issues affecting the functions and operation of the tractor.
Case ih maxxum 110 multicontroller ep tier 4 a tractor service repair manualfujsjfjkskkem
This document is a service manual for Case IH Maxxum tractors covering models MAXXUM 110 EP through MAXXUM 140 EP and MAXXUM CVT 110 through MAXXUM CVT 130. The manual contains specifications, diagrams, and repair procedures for the engine, transmission, hydraulics, electrical systems, and other components. It is intended as a reference for technicians servicing these tractor models.
Case ih maxxum 110 ep tier 4 a tractor service repair manualfujsjfjkskkem
This document is a service manual for Case IH Maxxum tractors covering models MAXXUM 110 EP through MAXXUM 140 EP and MAXXUM CVT 110 through MAXXUM CVT 130. The manual contains specifications, diagrams, and repair procedures for the engine, transmission, hydraulics, electrical systems, and other components. It is intended as a reference for technicians servicing these tractor models.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
3. Link Product / Engine
Product Market Product Engine
MAXXUM® CVT 115 North America F4DFE4134*B005
MAXXUM® CVT 125 North America F4DFE4133*B007
MAXXUM® CVT 135 North America F4DFE4132*B005
MAXXUM® CVT 145 North America F4DFE4131*B007
MAXXUM® 115 North America F4DFE4134*B006
MAXXUM® 115 Multicontroller North America F4DFE4134*B006
MAXXUM® 125 North America F4DFE4133*B008
MAXXUM® 125 Multicontroller North America F4DFE4133*B008
MAXXUM® 135 North America F4DFE4132*B006
MAXXUM® 135 Multicontroller North America F4DFE4132*B006
MAXXUM® 145 North America F4DFE4131*B008
MAXXUM® 145 Multicontroller North America F4DFE4131*B008
MAXXUM® 150 North America F4DFE6132*B007
MAXXUM® 150 Multicontroller North America F4DFE6132*B007
47938724 19/10/2015
9. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE IH Sales and Service Networks.
47938724 19/10/2015
3
10. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
47938724 19/10/2015
4
11. INTRODUCTION
Manual content
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at
the end of each Chapter. Page number references are included for every piece of technical information listed in the
Chapter Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components, assemblies or
sub-assemblies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components, assemblies or
sub-assemblies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hydraulic
devices, components, assemblies or sub-assemblies.
• Service Data (remove disassemble, assemble, install) for all the mechanical, electrical or hydraulic devices, com-
ponents, assemblies or sub-assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by a
number (00, 35, 55, etc.). The Sections included in the manual will depend on the type and function of the machine that
the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This table illustrates
which Sections could be included in a manual for a particular product.
PRODUCT
Tractors
Vehicles with working arms: backhoes, excavators,
skid steers, ….
Combines, forage harvesters, balers, ….
Seeding, planting, floating, spraying
equipment, ….
SECTION Mounted equipment and tools, ….
00 - Maintenance X X X X X
05 - Machine completion and equipment X X X X X
10 - Engine X X X X
14 - Main gearbox and drive X X X X
18 - Clutch X X X
21 - Transmission X X X X
23 - Four wheel drive (4WD) system X X X X
25 - Front axle system X X X X
27 - Rear axle system X X X X
29 - Hydrostatic drive X X X X
31 - Power Take-Off (PTO) X X
33 - Brakes and controls X X X X
35 - Hydraulic systems X X X X
36 - Pneumatic system X X X X
37 - Hitches, drawbars and implement couplings X X X
39 - Frames and ballasting X X X X X
41 - Steering X X X X
44 - Wheels X X X X
46 - Steering clutches
48 - Tracks and track suspension X X X
50 - Cab climate control X X X X
55 - Electrical systems X X X X X
56 - Grape harvester shaking
58 - Attachments/headers X
60 - Product feeding X
47938724 19/10/2015
5
12. INTRODUCTION
61 - Metering system X
62 - Pressing - Bale formation X
63 - Chemical applicators X
64 - Chopping X
66 - Threshing X
68 - Tying/Wrapping/Twisting X
69 - Bale wagons
70 - Ejection X
71 - Lubrication system X X X X X
72 - Separation X
73 - Residue handling X
74 - Cleaning X
75 - Soil preparation/Finishing
76 - Secondary cleaning / Destemmer
77 - Seeding X
78 - Spraying X
79 - Planting X
80 - Crop storage / Unloading X
82 - Front loader and bucket X X
83 - Telescopic single arm X X
84 - Booms, dippers and buckets X X
86 - Dozer blade and arm X X
88 - Accessories X X X X X
89 - Tools X X X X X
90 - Platform, cab, bodywork and decals X X X X
47938724 19/10/2015
6
14. Engine - Engine and crankcase
Engine - Disconnect
MAXXUM® 115 Multicontroller NA
MAXXUM® 115 NA
MAXXUM® 125 Multicontroller NA
MAXXUM® 125 NA
MAXXUM® 135 Multicontroller NA
MAXXUM® 135 NA
MAXXUM® 145 Multicontroller NA
MAXXUM® 145 NA
MAXXUM® 150 Multicontroller NA
MAXXUM® 150 NA
Prior operation:
Discharge the air conditioning system, see Air conditioning - Discharging (50.200).
Prior operation:
Disconnect the battery, see Battery - Disconnect (55.302).
Prior operation:
Drain the engine cooling system, see Engine cooling system - Drain fluid (10.400).
Prior operation:
Remove the selective catalytic reduction (SCR) muffler, see Selective Catalytic Reduction (SCR) muffler and cat-
alyst - Remove (10.500).
Prior operation:
Remove the left-hand fuel tank, see Fuel tank - Remove (10.216).
Prior operation:
Remove the coolant control valve, see Coolant control valve - Remove (10.500).
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
47938724 19/10/2015
10.1 [10.001] / 3
15. Engine - Engine and crankcase
All vehicles
1. WARNING
Crushing hazard!
The wheels on this vehicle are very heavy. Al-
ways use a wheel remover or chain hoists to re-
move and install the wheels. Use an assistant
as required.
Failure to comply could result in death or seri-
ous injury.
W0149A
Install the left-hand rear wheel.
BAIL14TR00881AB 1
2. Drain the transmission oil.
A. Remove the transmission housing drain plug and
drain the transmission oil into a suitable container.
B. Install the drain plug and torque to 68 - 82 N·m (50
- 60 lb ft).
BAIL14TR00962AB 2
Vehicles with front hitch
3. Disconnect the front hitch hydraulic pipes from the mid-
mount valve.
BAIL13TR01645AB 3
4. Remove the front hitch hydraulic pipes.
BAIL13TR01647AB 4
47938724 19/10/2015
10.1 [10.001] / 4
16. Engine - Engine and crankcase
5. 1. Disconnect the radar electrical connector (if
equipped).
2. Remove the radar (if equipped).
BAIL13TR01648AB 5
6. WARNING
Heavy object!
ALWAYS use a hoist or get assistance to lift the
component.
Failure to comply could result in death or seri-
ous injury.
W0086A
Remove the right-hand side rail.
NOTE: Repeat this step for the left-hand side.
BAIL13TR01649AB 6
All vehicles
7. Disconnect the oil cooler supply and return pipes.
BAIL14TR00882AB 7
8. Remove the oil cooler supply and return pipes.
BAIL14TR00883AB 8
47938724 19/10/2015
10.1 [10.001] / 5
17. Engine - Engine and crankcase
9. Detach the fuse box.
A. Remove the retaining nuts.
B. Detach the wiring harnesses from the retaining
clips.
BAIL14TR00935AB 9
10. • Disconnect the alternator electrical connector.
• Disconnect the in-line electrical connector.
BAIL14TR00936AB 10
11. Remove the side panel mounting bracket.
BAIL14TR00937AB 11
12. Remove the starter motor shield.
A. Cut the cable ties.
B. Remove the starter motor shield retaining bolts.
BAIL14TR00938AB 12
47938724 19/10/2015
10.1 [10.001] / 6
18. Engine - Engine and crankcase
13. Disconnect the starter motor electrical connectors.
BAIL14TR00884AB 13
14. 1. Disconnect the starter motor negative terminal.
2. Disconnect the cab heater supply pipe.
3. Detach the cab heater supply pipe.
BAIL14TR00885AB 14
15. Detach the cab heater supply pipe.
BAIL14TR00886AB 15
16. Disconnect the block heater electrical connector (if
equipped).
BAIL14TR00887AB 16
47938724 19/10/2015
10.1 [10.001] / 7
19. Engine - Engine and crankcase
17. Disconnect the heater supply hose from the rear of the
cylinder head.
BAIL12APH145AVA 17
18. Disconnect the engine breather pipe.
BAIL14TR00888AB 18
19. 1. Disconnect the brake fluid reservoir electrical con-
nector.
2. Remove the brake fluid reservoir heat shield.
BAIL15TR00026AA 19
20. Detach the brake fluid reservoir and position it to one
side.
BAIL14TR00939AB 20
47938724 19/10/2015
10.1 [10.001] / 8
20. Engine - Engine and crankcase
21. Disconnect the steering pipes.
NOTE: Mark the pipes to aid installation.
BAIL14TR00940AB 21
22. Remove the fuel line.
BAIL14TR00941AB 22
23. 1. Disconnect the electrical connector (1).
2. Detach the wiring harness (2) from the bracket.
3. Remove the bracket.
BAIL14TR00943AB 23
24. Disconnect the in-line electrical connector.
BAIL14TR00944AB 24
47938724 19/10/2015
10.1 [10.001] / 9
21. Engine - Engine and crankcase
25. Remove the aftercooler left-hand hose.
BAIL14TR00945AB 25
26. 1. Detach the electrical connector from the air-con-
ditioning pipe.
2. Disconnect the air-conditioning in-line pipe.
3. Disconnect the air-conditioning compressor pipe.
NOTE: Seal all openings using clean blanking caps.
BAIL14TR00946AB 26
27. • Disconnect the ground cable.
• Disconnect the in-line electrical connector.
• Disconnect the fuel line.
BAIL14TR00947AB 27
28. Disconnect the water-in-fuel electrical connector.
BAIL14TR00948AB 28
47938724 19/10/2015
10.1 [10.001] / 10
22. Engine - Engine and crankcase
29. Disconnect the differential lock supply pipe.
BAIL14TR00949AB 29
30. 1. Disconnect the in-line electrical connector.
2. Detach the wiring harness from the clip.
3. Cut the cable tie.
NOTICE: Seal all openings using clean blanking plugs.
BAIL14TR00950AB 30
31. Remove the upper shroud.
BAIL14TR00951AB 31
32. 1. Disconnect the in-line electrical connector.
2. Detach the wiring harness from the clip.
BAIL14TR00952AB 32
47938724 19/10/2015
10.1 [10.001] / 11
23. Engine - Engine and crankcase
33. • Disconnect the air intake temperature (IAT) sensor
electrical connector.
• Detach the wiring harness from the clips.
BAIL14TR00953AB 33
34. Disconnect the air cleaner sensor electrical connec-
tors.
BAIL14TR00961AB 34
35. Disconnect the dosing module electrical connector.
BAIL14TR00954AB 35
36. • Disconnect the nitrogen oxide (NOx) amplifier elec-
trical connector.
• Disconnect the air-conditioning compressor in-line
electrical connector.
BAIL14TR00963AB 36
47938724 19/10/2015
10.1 [10.001] / 12
24. Engine - Engine and crankcase
37. 1. Detach the wiring harness from the clips.
2. Disconnect the in-line electrical connector.
BAIL14TR00964AB 37
38. Disconnect the hood wiring harness in-line electrical
connector.
BAIL14TR00903AB 38
Vehicles with standard front axle
39. Remove the front wheel drive shaft guard front retain-
ing bolts.
BAIL14TR00955AB 39
40. Remove the front wheel drive shaft guard rear retain-
ing bolts.
BAIL14TR00956AB 40
47938724 19/10/2015
10.1 [10.001] / 13
25. Engine - Engine and crankcase
41. Remove the front wheel drive shaft guard.
BAIL14TR00965AB 41
42. Disconnect the front wheel drive shaft.
A. Detach the circlip (1).
B. Slide the front wheel drive shaft sleeve (2).
BAIL14TR00966AB 42
43. Remove the front wheel drive shaft.
BAIL14TR00967AB 43
Vehicles with suspended front axle
44. Remove the front wheel drive shaft guard.
BAIL13TR01694AB 44
47938724 19/10/2015
10.1 [10.001] / 14
26. Engine - Engine and crankcase
45. 1. Remove the circlip (1).
2. Slide the front wheel drive shaft sleeve (2).
BAIL13TR01695AB 45
46. Remove the oil cooler lines.
BAIL13TR00747AB 46
47. 1. Using a suitable trolley jack support the front axle
suspension arm.
2. Remove the front axle suspension arm retaining
bolts.
3. Lower the suspension arm and remove the trolley
jack.
BAIL13TR01693AB 47
All vehicles
48. Remove the engine to transmission lower inner retain-
ing bolts.
BAIL14TR00968AB 48
47938724 19/10/2015
10.1 [10.001] / 15
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. Engine - Engine and crankcase
49. Remove the engine to transmission lower outer retain-
ing bolts.
BAIL14TR00969AB 49
50. Position the static part of the tractor splitting stand
380003352 under the transmission and secure to the
right-hand side of the transmission.
BAIL14TR00982AB 50
51. Secure the static part of the tractor splitting stand
380003352 to the left-hand side of the transmission.
BAIL14TR00983AB 51
52. Install the smaller wheeled part of the tractor splitting
stand 380003352 under the engine.
BAIL14TR00984AB 52
47938724 19/10/2015
10.1 [10.001] / 16
29. Engine - Engine and crankcase
53. Install the tractor splitting stand 380003352 alignment
bar to the front part of the splitting kit.
BAIL13TR01696AB 53
54. Install the larger wheeled part of the tractor splitting
stand 380003352 to the front frame and support the
weight of the tractor with splitting stand.
BAIL15TR00014AA 54
55. Tighten the alignment bar bolt.
BAIL15TR00015AA 55
56. Remove the engine to transmission upper retaining
bolts.
BAIL13TR00798AB 56
47938724 19/10/2015
10.1 [10.001] / 17
30. Engine - Engine and crankcase
57. Remove the engine to transmission right-hand side
retaining bolts.
BAIL13TR00797AB 57
58. Remove the engine to transmission left-hand side re-
taining bolts.
BAIL15TR00016AA 58
59. Roll the front axle and engine assembly away from the
transmission.
47938724 19/10/2015
10.1 [10.001] / 18
31. Engine - Engine and crankcase
Engine - Connect
MAXXUM® 115 Multicontroller NA
MAXXUM® 115 NA
MAXXUM® 125 Multicontroller NA
MAXXUM® 125 NA
MAXXUM® 135 Multicontroller NA
MAXXUM® 135 NA
MAXXUM® 145 Multicontroller NA
MAXXUM® 145 NA
MAXXUM® 150 Multicontroller NA
MAXXUM® 150 NA
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
All vehicles
1. Thoroughly clean the engine to transmission mating
surfaces.
2. Apply a bead of liquid gasket of approximately 2 mm
diameter.
3. Align and install the front axle and engine assembly to
the transmission.
4. 1. Install the engine to transmission left-hand side re-
taining bolts.
2. Torque to 285-315 Nm ( 210-232 lb ft).
BAIL15TR00016AA 1
47938724 19/10/2015
10.1 [10.001] / 19
32. Engine - Engine and crankcase
5. 1. Install the engine to transmission right-hand side
retaining bolts.
2. Torque to 285-315 Nm ( 210-232 lb ft).
BAIL13TR00797AB 2
6. 1. Install the engine to transmission upper retaining
bolts.
2. Torque to 285-315 Nm ( 210-232 lb ft).
NOTE: The center bolt is unique in length.
BAIL13TR00798AB 3
7. Loosen the alignment bar bolt.
BAIL15TR00015AA 4
8. Remove the larger wheeled part of the tractor splitting
stand 380003352 from the front frame.
BAIL15TR00014AA 5
47938724 19/10/2015
10.1 [10.001] / 20
33. Engine - Engine and crankcase
9. Remove the tractor splitting stand 380003352 align-
ment bar from the front part of the splitting kit.
BAIL13TR01696AB 6
10. Remove the smaller wheeled part of the tractor split-
ting stand 380003352 from under the engine.
BAIL14TR00984AB 7
11. Remove the static part of the tractor splitting stand
380003352 from the left-hand side of the transmis-
sion.
BAIL14TR00983AB 8
12. Remove the static part of the tractor splitting stand
380003352 from the right-hand side of the transmis-
sion.
BAIL14TR00982AB 9
13. Remove the static part of the tractor splitting stand
380003352 from under the transmission.
47938724 19/10/2015
10.1 [10.001] / 21
34. Engine - Engine and crankcase
14. 1. Install the engine to transmission lower outer re-
taining bolts.
2. Torque to 285-315 Nm ( 210-232 lb ft).
BAIL14TR00969AB 10
15. 1. Install the engine to transmission lower inner re-
taining bolts.
2. Torque to 285-315 Nm ( 210-232 lb ft).
BAIL14TR00968AB 11
Vehicles with suspended front axle
16. 1. Using a suitable trolley jack raise and support the
front axle suspension arm.
2. Install the front axle suspension arm retaining
bolts.
BAIL13TR01693AB 12
17. Install the oil cooler lines.
BAIL13TR00747AB 13
47938724 19/10/2015
10.1 [10.001] / 22