This document is a service manual for Case IH Maxxum tractors that provides information on the tractor systems, components, and specifications. It includes sections covering the engine, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulic systems, hitches and drawbars, frames, steering, wheels, cab climate control, and electrical systems. The manual contains detailed diagrams and instructions for servicing and repairing components.
Case ih maxxum 110 ep tier 4 a tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH Maxxum tractors covering models MAXXUM 110 EP through MAXXUM 140 EP and MAXXUM CVT 110 through MAXXUM CVT 130. The manual contains specifications, diagrams, and repair procedures for the engine, transmission, hydraulics, electrical systems, and other components. It is intended as a reference for technicians servicing these tractor models.
Yanmar 4 jh4 hte marine diesel engine service repair manualfjsefksemmm
This document is the service manual for Yanmar JH4 series marine engines. It contains safety information and procedures for proper maintenance and repair. The manual instructs technicians to carefully follow procedures to ensure quality service and recommends the use of special tools. It provides tables of contents, introduction, sections on safety, service information, maintenance, engine systems, troubleshooting, and service standards.
Yamaha outboard 40 veo, 40er service repair manual l 842362 fjsefksemmm
This document provides a service manual for 40V, 50H outboard motors. It includes an index listing chapters on general information, specifications, periodic inspection and adjustment, fuel system, power unit, lower unit, bracket unit, electrical system, and trouble analysis. The general information chapter covers identification, safety practices, special tools, measuring tools, and removal/installation tools. It provides guidance on safety, maintenance, and the use of proper tools when servicing these outboard motors.
Yale c875 glp25 vxp lift truck service repair manualfjsefksemmm
The document provides service manual contents and procedures for removing an operator cab from various lift truck models. It contains the following key points:
- The operator cab is a separate unit that can be removed as a complete module from the frame.
- Steps include tilting the steering column, sliding the seat forward, disconnecting battery and air filter hoses, draining coolant and removing radiator cap, disconnecting heater hoses and refrigerant lines (if equipped).
- Contact an HVAC technician to extract refrigerant from air conditioning systems prior to cab removal.
Yale b909 gdp80 vx lift truck service repair manualfjsefksemmm
1. The document provides service information for removing an operator cab from various lift truck models, including disconnecting battery, air filter hose, radiator cap, heater hoses, and refrigerant lines.
2. The instructions specify removing the left and right side doors, disconnecting gas springs, and lifting doors away from hinges.
3. Additional steps include contacting an HVAC technician to extract refrigerant if the cab includes air conditioning, and disconnecting quick connect fittings on heater hoses inside the cab.
Yale b888 erp13 vc lift truck service repair manualfjsefksemmm
This document provides service information for replacing the front window panel on several lift truck models. It describes removing the front window by taking out mounting hardware, washers, nuts, and bolts. For some models it also describes removing light brackets. The instructions specify cleaning and inspecting the window and components before reinstalling with new seals and hardware. Safety warnings are provided regarding working on electrical systems and using safety glass for any replacement windows.
Yale b875 glp20 vx lift truck service repair manualfjsefksemmm
This document provides a service manual for GLP/GDP20VX, GLP/GDP25VX, GLP/GDP30VX, GLP/GDP35VX lift trucks. It contains sections on frame components, engine repair, transmissions, axles, hydraulics, electrical systems, and more. The frame includes the counterweight, fuel tank, hydraulic tank, and mounts for the overhead guard, hood, and cowl. Procedures are provided for removing and replacing components like the counterweight, hood, floor plates and side covers to access parts. Safety precautions are noted for when putting the truck on blocks for maintenance.
Yale a839 erc120 hg lift truck service repair manualfjsefksemmm
This document provides a service manual for the ERC070-120HG lift truck models. It contains sections on various parts of the lift truck including the frame, motors, axles, steering components, brakes, hydraulics, controls, batteries, masts, cylinders and electrical systems. Procedures are provided for removing and installing the overhead guard. The document also includes specifications for battery size and compartment dimensions for each model.
Case ih maxxum 110 ep tier 4 a tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH Maxxum tractors covering models MAXXUM 110 EP through MAXXUM 140 EP and MAXXUM CVT 110 through MAXXUM CVT 130. The manual contains specifications, diagrams, and repair procedures for the engine, transmission, hydraulics, electrical systems, and other components. It is intended as a reference for technicians servicing these tractor models.
Yanmar 4 jh4 hte marine diesel engine service repair manualfjsefksemmm
This document is the service manual for Yanmar JH4 series marine engines. It contains safety information and procedures for proper maintenance and repair. The manual instructs technicians to carefully follow procedures to ensure quality service and recommends the use of special tools. It provides tables of contents, introduction, sections on safety, service information, maintenance, engine systems, troubleshooting, and service standards.
Yamaha outboard 40 veo, 40er service repair manual l 842362 fjsefksemmm
This document provides a service manual for 40V, 50H outboard motors. It includes an index listing chapters on general information, specifications, periodic inspection and adjustment, fuel system, power unit, lower unit, bracket unit, electrical system, and trouble analysis. The general information chapter covers identification, safety practices, special tools, measuring tools, and removal/installation tools. It provides guidance on safety, maintenance, and the use of proper tools when servicing these outboard motors.
Yale c875 glp25 vxp lift truck service repair manualfjsefksemmm
The document provides service manual contents and procedures for removing an operator cab from various lift truck models. It contains the following key points:
- The operator cab is a separate unit that can be removed as a complete module from the frame.
- Steps include tilting the steering column, sliding the seat forward, disconnecting battery and air filter hoses, draining coolant and removing radiator cap, disconnecting heater hoses and refrigerant lines (if equipped).
- Contact an HVAC technician to extract refrigerant from air conditioning systems prior to cab removal.
Yale b909 gdp80 vx lift truck service repair manualfjsefksemmm
1. The document provides service information for removing an operator cab from various lift truck models, including disconnecting battery, air filter hose, radiator cap, heater hoses, and refrigerant lines.
2. The instructions specify removing the left and right side doors, disconnecting gas springs, and lifting doors away from hinges.
3. Additional steps include contacting an HVAC technician to extract refrigerant if the cab includes air conditioning, and disconnecting quick connect fittings on heater hoses inside the cab.
Yale b888 erp13 vc lift truck service repair manualfjsefksemmm
This document provides service information for replacing the front window panel on several lift truck models. It describes removing the front window by taking out mounting hardware, washers, nuts, and bolts. For some models it also describes removing light brackets. The instructions specify cleaning and inspecting the window and components before reinstalling with new seals and hardware. Safety warnings are provided regarding working on electrical systems and using safety glass for any replacement windows.
Yale b875 glp20 vx lift truck service repair manualfjsefksemmm
This document provides a service manual for GLP/GDP20VX, GLP/GDP25VX, GLP/GDP30VX, GLP/GDP35VX lift trucks. It contains sections on frame components, engine repair, transmissions, axles, hydraulics, electrical systems, and more. The frame includes the counterweight, fuel tank, hydraulic tank, and mounts for the overhead guard, hood, and cowl. Procedures are provided for removing and replacing components like the counterweight, hood, floor plates and side covers to access parts. Safety precautions are noted for when putting the truck on blocks for maintenance.
Yale a839 erc120 hg lift truck service repair manualfjsefksemmm
This document provides a service manual for the ERC070-120HG lift truck models. It contains sections on various parts of the lift truck including the frame, motors, axles, steering components, brakes, hydraulics, controls, batteries, masts, cylinders and electrical systems. Procedures are provided for removing and installing the overhead guard. The document also includes specifications for battery size and compartment dimensions for each model.
Yale (d875) gtp070 vx lift truck service repair manualfjsefksemmm
The document provides instructions for removing an operator cab from a forklift. Key steps include:
1. Tilting the steering column up, sliding the seat forward, opening rear doors/windows, and disconnecting the battery.
2. Disconnecting air filter hoses, removing radiator covers, and draining coolant lines.
3. For models with air conditioning, extracting refrigerant and disconnecting AC lines.
4. Disconnecting wiring harnesses, heater lines, gas springs and removing door assemblies. The cab can then be lifted off as a complete unit.
Perkins 4000 series 4016 61 trg industrial engine (s16 engine) service repair...fjsefksemmm
This document provides instructions for disassembling and assembling various components of a 4016-61 TRG Industrial Engine. It begins with important safety information, warning that improper operation, maintenance or repair can be dangerous. The document provides detailed step-by-step instructions and diagrams for removing and installing components like the fuel system, turbocharger, cylinder head, pistons, crankshaft, and other parts. Safety precautions are emphasized throughout.
Perkins 1600 series industrial engine ( xgd ) service repair manualfjsefksemmm
This document provides troubleshooting information for 1600 series industrial engines. It contains important safety information and warns of potential hazards. The document is divided into sections covering electronic troubleshooting, diagnostic trouble codes, functional tests, and an index. Safety precautions are marked and procedures are given to minimize risk of damage to electronic components during welding.
Perkins 400 series 402 d 403d 404d industrial engine (model gn) service repai...fjsefksemmm
This document provides instructions for disassembling and assembling various components of Perkins 402D-403D-404D industrial diesel engines, including removal and installation procedures for items like the fuel filter base, fuel transfer pump, fuel lines, fuel injection pump, turbocharger, valves, pistons, bearings, and other parts. Safety warnings are provided to prevent injury when performing maintenance on these engines.
New holland w110 tc wheel loader service repair manualfjsefksemmm
This document provides safety instructions and precautions for operating a wheel loader. It outlines rules regarding starting and operating the machine, such as ensuring all safety devices are in place, wearing proper protective equipment, and avoiding carrying passengers. It emphasizes the importance of checking slopes and terrain before operation and going slowly on inclines. The document also covers stopping procedures like lowering attachments safely and applying the parking brake. Operators are advised to thoroughly read and follow all safety rules and precautions.
New holland t8040 tractor service repair manualfjsefksemmm
This document provides a master table of contents for a tractor repair manual. It lists sections and chapters covering topics like standard torque specifications, safety information, engine removal and installation, fuel tank removal, hood removal, cooling system removal, transmission system operation, splitting the front frame from the transmission, splitting the transmission, speed transmission repair, splitting the range transmission from the rear frame, and range transmission repair. The document directs the user to other publications for information on engine repair.
Kubota rck60 b 23bx-eu tractor service repair manualfjsefksemmm
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kioti daedong dk55 tractor service repair manualfjsefksemmm
This document contains operation and maintenance instructions for a tractor. It includes:
1. Identification and safety information for the tractor.
2. Specifications for lubricants, fuels, and maintenance schedules. Inspections are to be done daily, every 50 hours of use, every 100 hours, and so on up to every 2 years.
3. Detailed chapters covering the engine, clutch, transmission system, and other components. These chapters describe features, troubleshooting steps, specifications, and procedures for disassembly, inspection, and maintenance.
Kioti daedong ck30 tractor service repair manualfjsefksemmm
This document contains operation and maintenance instructions for a tractor. It includes sections on safety, identification and dimensions of the tractor, general precautions for assembly and maintenance, specifications, lubrication requirements, tightening torques, and a maintenance schedule. The maintenance schedule includes daily, 50 hour, 100 hour, 200 hour, 400 hour, 600 hour, 800 hour, yearly, and bi-yearly checks. Additional sections provide details on tires, implement limitations, the engine system, clutch, and transmission.
Kioti daedong ck25 tractor service repair manualfjsefksemmm
- The document provides safety instructions and tips for working on tractors, including proper safety gear, work area preparation, battery and hydraulic system handling, use of appropriate tools, and prevention of fires, scalding, and exposure to hazardous materials. It emphasizes that most accidents can be avoided by following basic safety regulations and instructions. Readers are warned to never perform work without fully understanding the tractor systems to avoid injury.
Daewoo doosan solar 220 ll forestry machine parts catalogue manualfjsefksemmm
This document provides a list of parts for a cylinder block assembly. It includes 54 numbered items describing parts like the cylinder block, caps, liners, plugs, bolts, and seals. Quantities, serial numbers, and replacement part numbers are provided for each item.
Kawasaki 85 z7 wheel loader parts catalogue manualfjsefksemmm
This document is a parts catalog for a 85Z7 wheel loader powered by an ISUZU 6HK1 engine. It contains over 500 pages listing parts by category including the engine, transmission, axles, frame, cab, electrical system, hydraulic system, and attachments. Parts are organized by section and page number for easy reference to locate specific components for the 85Z7 model.
Daewoo doosan solar 210 w v (210wv) (dieu exp) wheeled excavator parts catalo...fjsefksemmm
This document provides a parts list and diagrams for the cylinder block and related components of a SOLAR 210W-V engine. It includes over 50 numbered parts, their descriptions and quantities. The parts are grouped into sections covering the cylinder block, timing gear case, flywheel housing, crankshaft, cylinder head, valve mechanism, and camshaft components.
This document is an operation and maintenance manual for a Kawasaki 80Z7B wheel loader. It provides instructions on safely operating and maintaining the machine. The manual covers identifying machine numbers, safety procedures and precautions, component names, operating instructions, maintenance, storage, specifications, and troubleshooting. Safety is the primary focus, with multiple sections outlining how to properly handle, transport, fuel, and service the loader to prevent injuries and machine damage.
This parts catalog provides a list of components for a Wheel Loader model 80Z7B. It includes parts for the pump, pump unit, motor, valves, cylinders, transmission, axles, accumulators, and other miscellaneous parts. The parts are organized by component type and include the part number, name, quantity, and applicable serial numbers for each part. The document also provides information on how the chassis number and manufacturer's serial number relate to the serial numbers listed in the parts catalog.
Kawasaki 67 z7 wheel loader service repair manual (65j5 8001 and up)fjsefksemmm
This document is a shop manual for disassembly and reassembly of a wheel loader. It contains sections on general information, maintenance standards, and procedures for disassembling and reassembling various components of the body, travel system, front attachment, and engine. The manual provides instructions on safety precautions, torque specifications, cleaning, painting, and testing procedures.
New holland vl5090 grape harvester service repair manualfjsefksemmm
This service manual contains documentation for various grape harvester models including specifications, maintenance information, and repair instructions. It provides technical details such as machine dimensions, component locations, and specifications for each harvester model. The document includes correspondence tables to indicate naming changes for some models over time. It also notes differences for some "high" machine versions used in specific regions.
New holland l180 skid steer loader service repair manualfjsefksemmm
This document provides a summary of a repair manual for New Holland construction equipment, including skid steer loaders and compact track loaders.
The manual begins with an introduction explaining the coding system used to classify technical information by location, information type, and product. It describes how to use the manual, which is divided into sections for different machine systems. Each section contains chapters which provide technical data, functional descriptions, diagnostic information, and service procedures.
Information units are the basic building blocks of each chapter and are identified by codes indicating their corresponding location, type of information, and product applicability. Users can search for relevant information units by identifying these codes. The manual headers and footers also provide navigational references to help
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Yale (d875) gtp070 vx lift truck service repair manualfjsefksemmm
The document provides instructions for removing an operator cab from a forklift. Key steps include:
1. Tilting the steering column up, sliding the seat forward, opening rear doors/windows, and disconnecting the battery.
2. Disconnecting air filter hoses, removing radiator covers, and draining coolant lines.
3. For models with air conditioning, extracting refrigerant and disconnecting AC lines.
4. Disconnecting wiring harnesses, heater lines, gas springs and removing door assemblies. The cab can then be lifted off as a complete unit.
Perkins 4000 series 4016 61 trg industrial engine (s16 engine) service repair...fjsefksemmm
This document provides instructions for disassembling and assembling various components of a 4016-61 TRG Industrial Engine. It begins with important safety information, warning that improper operation, maintenance or repair can be dangerous. The document provides detailed step-by-step instructions and diagrams for removing and installing components like the fuel system, turbocharger, cylinder head, pistons, crankshaft, and other parts. Safety precautions are emphasized throughout.
Perkins 1600 series industrial engine ( xgd ) service repair manualfjsefksemmm
This document provides troubleshooting information for 1600 series industrial engines. It contains important safety information and warns of potential hazards. The document is divided into sections covering electronic troubleshooting, diagnostic trouble codes, functional tests, and an index. Safety precautions are marked and procedures are given to minimize risk of damage to electronic components during welding.
Perkins 400 series 402 d 403d 404d industrial engine (model gn) service repai...fjsefksemmm
This document provides instructions for disassembling and assembling various components of Perkins 402D-403D-404D industrial diesel engines, including removal and installation procedures for items like the fuel filter base, fuel transfer pump, fuel lines, fuel injection pump, turbocharger, valves, pistons, bearings, and other parts. Safety warnings are provided to prevent injury when performing maintenance on these engines.
New holland w110 tc wheel loader service repair manualfjsefksemmm
This document provides safety instructions and precautions for operating a wheel loader. It outlines rules regarding starting and operating the machine, such as ensuring all safety devices are in place, wearing proper protective equipment, and avoiding carrying passengers. It emphasizes the importance of checking slopes and terrain before operation and going slowly on inclines. The document also covers stopping procedures like lowering attachments safely and applying the parking brake. Operators are advised to thoroughly read and follow all safety rules and precautions.
New holland t8040 tractor service repair manualfjsefksemmm
This document provides a master table of contents for a tractor repair manual. It lists sections and chapters covering topics like standard torque specifications, safety information, engine removal and installation, fuel tank removal, hood removal, cooling system removal, transmission system operation, splitting the front frame from the transmission, splitting the transmission, speed transmission repair, splitting the range transmission from the rear frame, and range transmission repair. The document directs the user to other publications for information on engine repair.
Kubota rck60 b 23bx-eu tractor service repair manualfjsefksemmm
This document provides a workshop manual for tractors, rotary mowers, and front loaders. It contains sections on identification, precautions, lubricants, tightening torques, maintenance checklists, special tools, tires, and implement limitations. The precautions section emphasizes safely handling electrical parts and wiring, including disconnecting negative battery terminals first, securely clamping wiring, avoiding damage, and checking for loose connections annually.
Kioti daedong dk55 tractor service repair manualfjsefksemmm
This document contains operation and maintenance instructions for a tractor. It includes:
1. Identification and safety information for the tractor.
2. Specifications for lubricants, fuels, and maintenance schedules. Inspections are to be done daily, every 50 hours of use, every 100 hours, and so on up to every 2 years.
3. Detailed chapters covering the engine, clutch, transmission system, and other components. These chapters describe features, troubleshooting steps, specifications, and procedures for disassembly, inspection, and maintenance.
Kioti daedong ck30 tractor service repair manualfjsefksemmm
This document contains operation and maintenance instructions for a tractor. It includes sections on safety, identification and dimensions of the tractor, general precautions for assembly and maintenance, specifications, lubrication requirements, tightening torques, and a maintenance schedule. The maintenance schedule includes daily, 50 hour, 100 hour, 200 hour, 400 hour, 600 hour, 800 hour, yearly, and bi-yearly checks. Additional sections provide details on tires, implement limitations, the engine system, clutch, and transmission.
Kioti daedong ck25 tractor service repair manualfjsefksemmm
- The document provides safety instructions and tips for working on tractors, including proper safety gear, work area preparation, battery and hydraulic system handling, use of appropriate tools, and prevention of fires, scalding, and exposure to hazardous materials. It emphasizes that most accidents can be avoided by following basic safety regulations and instructions. Readers are warned to never perform work without fully understanding the tractor systems to avoid injury.
Daewoo doosan solar 220 ll forestry machine parts catalogue manualfjsefksemmm
This document provides a list of parts for a cylinder block assembly. It includes 54 numbered items describing parts like the cylinder block, caps, liners, plugs, bolts, and seals. Quantities, serial numbers, and replacement part numbers are provided for each item.
Kawasaki 85 z7 wheel loader parts catalogue manualfjsefksemmm
This document is a parts catalog for a 85Z7 wheel loader powered by an ISUZU 6HK1 engine. It contains over 500 pages listing parts by category including the engine, transmission, axles, frame, cab, electrical system, hydraulic system, and attachments. Parts are organized by section and page number for easy reference to locate specific components for the 85Z7 model.
Daewoo doosan solar 210 w v (210wv) (dieu exp) wheeled excavator parts catalo...fjsefksemmm
This document provides a parts list and diagrams for the cylinder block and related components of a SOLAR 210W-V engine. It includes over 50 numbered parts, their descriptions and quantities. The parts are grouped into sections covering the cylinder block, timing gear case, flywheel housing, crankshaft, cylinder head, valve mechanism, and camshaft components.
This document is an operation and maintenance manual for a Kawasaki 80Z7B wheel loader. It provides instructions on safely operating and maintaining the machine. The manual covers identifying machine numbers, safety procedures and precautions, component names, operating instructions, maintenance, storage, specifications, and troubleshooting. Safety is the primary focus, with multiple sections outlining how to properly handle, transport, fuel, and service the loader to prevent injuries and machine damage.
This parts catalog provides a list of components for a Wheel Loader model 80Z7B. It includes parts for the pump, pump unit, motor, valves, cylinders, transmission, axles, accumulators, and other miscellaneous parts. The parts are organized by component type and include the part number, name, quantity, and applicable serial numbers for each part. The document also provides information on how the chassis number and manufacturer's serial number relate to the serial numbers listed in the parts catalog.
Kawasaki 67 z7 wheel loader service repair manual (65j5 8001 and up)fjsefksemmm
This document is a shop manual for disassembly and reassembly of a wheel loader. It contains sections on general information, maintenance standards, and procedures for disassembling and reassembling various components of the body, travel system, front attachment, and engine. The manual provides instructions on safety precautions, torque specifications, cleaning, painting, and testing procedures.
New holland vl5090 grape harvester service repair manualfjsefksemmm
This service manual contains documentation for various grape harvester models including specifications, maintenance information, and repair instructions. It provides technical details such as machine dimensions, component locations, and specifications for each harvester model. The document includes correspondence tables to indicate naming changes for some models over time. It also notes differences for some "high" machine versions used in specific regions.
New holland l180 skid steer loader service repair manualfjsefksemmm
This document provides a summary of a repair manual for New Holland construction equipment, including skid steer loaders and compact track loaders.
The manual begins with an introduction explaining the coding system used to classify technical information by location, information type, and product. It describes how to use the manual, which is divided into sections for different machine systems. Each section contains chapters which provide technical data, functional descriptions, diagnostic information, and service procedures.
Information units are the basic building blocks of each chapter and are identified by codes indicating their corresponding location, type of information, and product applicability. Users can search for relevant information units by identifying these codes. The manual headers and footers also provide navigational references to help
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. SERVICE MANUAL
MAXXUM 110 EP , MAXXUM 110 Multicontroller EP , MAXXUM 115 EP
, MAXXUM 115 Multicontroller EP , MAXXUM 120 EP , MAXXUM 120
Multicontroller EP , MAXXUM 125 EP , MAXXUM 125 Multicontroller EP ,
MAXXUM 130 EP , MAXXUM 130 Multicontroller EP , MAXXUM 140 EP ,
MAXXUM 140 Multicontroller EP , MAXXUM CVT 110 , MAXXUM CVT 120 ,
MAXXUM CVT 130
47665854 27/03/2014
EN
3. Link Product / Engine
Product Market Product Engine
MAXXUM CVT 110 North America F4DFE413C*A
MAXXUM CVT 120 North America F4DFE413B*A
MAXXUM CVT 130 North America F4DFE413A*A
MAXXUM 110 EP North America F4DFE413E*A
MAXXUM 110 Multicontroller EP North America F4DFE413C*A
MAXXUM 115 EP North America F4DFE613F*A
MAXXUM 115 Multicontroller EP North America F4DFE613F*A
MAXXUM 120 EP North America F4DFE413D*A
MAXXUM 120 Multicontroller EP North America F4DFE413B*A
MAXXUM 125 EP North America F4DFE613E*A
MAXXUM 125 Multicontroller EP North America F4DFE613E*A
MAXXUM 130 EP North America F4DFE413C*A
MAXXUM 130 Multicontroller EP North America F4DFE413A*A
MAXXUM 140 EP North America F4DFE6132*A
MAXXUM 140 Multicontroller EP North America F4DFE6132*A
47665854 27/03/2014
10. INTRODUCTION
Foreword
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the CASE IH
Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed.
47665854 27/03/2014
3
11. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
47665854 27/03/2014
4
12. INTRODUCTION
Manual content
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at
the end of each Chapter. Page number references are included for every piece of technical information listed in the
Chapter Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components, assemblies or
sub-assemblies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components, assemblies or
sub-assemblies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hydraulic
devices, components, assemblies or sub-assemblies.
• Service Data (remove disassemble, assemble, install) for all the mechanical, electrical or hydraulic devices, com-
ponents, assemblies or sub-assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by a
number (00, 35, 55, etc.). The Sections included in the manual will depend on the type and function of the machine that
the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This table illustrates
which Sections could be included in a manual for a particular product.
PRODUCT
Tractors
Vehicles with working arms: backhoes, excavators,
skid steers, ….
Combines, forage harvesters, balers, ….
Seeding, planting, floating, spraying
equipment, ….
SECTION Mounted equipment and tools, ….
00 - Maintenance X X X X X
05 - Machine completion and equipment X X X X X
10 - Engine X X X X
14 - Main gearbox and drive X X X X
18 - Clutch X X X
21 - Transmission X X X X
23 - Four wheel drive (4WD) system X X X X
25 - Front axle system X X X X
27 - Rear axle system X X X X
29 - Hydrostatic drive X X X X
31 - Power Take-Off (PTO) X X
33 - Brakes and controls X X X X
35 - Hydraulic systems X X X X
36 - Pneumatic system X X X X
37 - Hitches, drawbars and implement couplings X X X
39 - Frames and ballasting X X X X X
41 - Steering X X X X
44 - Wheels X X X X
46 - Steering clutches
48 - Tracks and track suspension X X X
50 - Cab climate control X X X X
55 - Electrical systems X X X X X
56 - Grape harvester shaking
58 - Attachments/headers X
60 - Product feeding X
47665854 27/03/2014
5
13. INTRODUCTION
61 - Metering system X
62 - Pressing - Bale formation X
63 - Chemical applicators X
64 - Chopping X
66 - Threshing X
68 - Tying/Wrapping/Twisting X
69 - Bale wagons
70 - Ejection X
71 - Lubrication system X X X X X
72 - Separation X
73 - Residue handling X
74 - Cleaning X
75 - Soil preparation/Finishing
76 - Secondary cleaning / Destemmer
77 - Seeding X
78 - Spraying X
79 - Planting X
80 - Crop storage / Unloading X
82 - Front loader and bucket X X
83 - Telescopic single arm X X
84 - Booms, dippers and buckets X X
86 - Dozer blade and arm X X
88 - Accessories X X X X X
89 - Tools X X X X X
90 - Platform, cab, bodywork and decals X X X X
47665854 27/03/2014
6
14. SERVICE MANUAL
Engine
MAXXUM 110 EP , MAXXUM 110 Multicontroller EP , MAXXUM 115 EP
, MAXXUM 115 Multicontroller EP , MAXXUM 120 EP , MAXXUM 120
Multicontroller EP , MAXXUM 125 EP , MAXXUM 125 Multicontroller EP ,
MAXXUM 130 EP , MAXXUM 130 Multicontroller EP , MAXXUM 140 EP ,
MAXXUM 140 Multicontroller EP , MAXXUM CVT 110 , MAXXUM CVT 120 ,
MAXXUM CVT 130
47665854 27/03/2014
10
15. Engine - Engine and crankcase
Engine - Disconnect
MAXXUM 115 EP NA
MAXXUM 115 Multicontroller EP NA
MAXXUM 125 EP NA
MAXXUM 125 Multicontroller EP NA
MAXXUM 140 EP NA
MAXXUM 140 Multicontroller EP NA
Prior operation:
Discharge the Air conditioning system, for further information refer to Air conditioning - Discharging (50.200)
Prior operation:
Disconnect battery, for further information refer to Battery - Disconnect (55.302)
Prior operation:
Drain the engine coolant system, for further information refer to Engine cooling system - Drain fluid (10.400)
Prior operation:
Remove the selective catalytic reduction (SRC) muffler, for further information refer to Selective Catalytic Reduction
(SCR) muffler and catalyst - Remove (10.500)
Prior operation:
Remove the selective catalytic reduction (SRC) coolant control valve, for further information refer to Coolant control
valve - Remove (10.500)
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
1. Using suitable lifting equipment support the front
weights.
BAIL08CVT011AVA 1
47665854 27/03/2014
10.1 [10.001] / 13
16. Engine - Engine and crankcase
2. Disconnect and remove the front weights from the
weight carrier.
BAIL08CVT012AVA 2
3. Disconnect the radar electrical connector and remove
the radar (if fitted).
BAIL10CVT358AVA 3
4. Remove the flywheel speed sensor.
BAIS06CCM087AVA 4
5. Disconnect the engine harness electrical connectors.
BAIL12APH142AVA 5
47665854 27/03/2014
10.1 [10.001] / 14
17. Engine - Engine and crankcase
6. Detach the cab heater return pipe.
BAIL07APH121AVA 6
7. Disconnect the oil cooler supply pipes.
BAIL12APH143AVA 7
8. Disconnect the oil cooler supply and return pipes (1).
Remove the oil cooler pipes (2).
BAIL12APH144AVA 8
9. Disconnect the heater supply hose from the rear of the
engine cylinder head.
BAIL12APH145AVA 9
47665854 27/03/2014
10.1 [10.001] / 15
18. Engine - Engine and crankcase
10. Remove the starter motor heat shield.
BAIL12APH146AVA 10
11. Remove the starter motor cover.
BAIL10CVT361AVA 11
12. Disconnect the starter motor electrical connector.
BAIL10CVT363AVA 12
13. Disconnect the positive terminal (1), negative terminal
(2) relay and bracket (3) and position to one side.
BAIL12APH147AVA 13
47665854 27/03/2014
10.1 [10.001] / 16
19. Engine - Engine and crankcase
14. Disconnect the starter motor negative cables.
BAIL10CVT364AVA 14
15. Detach the alternator wiring harness electrical con-
nector from the bracket (1) and detach the wiring har-
ness (2).
BAIL10CVT365AVA 15
16. Disconnect the alternator electrical connectors.
BAIL10CVT366AVA 16
17. Disconnect the brake fluid reservoir electrical connec-
tor (1) and detach the brake fluid reservoir (2) and po-
sition it to one side.
BAIL10CVT367AVA 17
47665854 27/03/2014
10.1 [10.001] / 17
20. Engine - Engine and crankcase
18. Remove the front brake retaining bracket (1) and re-
move the front brake pipe (2).
BAIL12APH148AVA 18
19. Disconnect the A/C pipe from the A/C compressor.
NOTE: Install blanking plugs/caps to all openings to pre-
vent dirt ingress.
BAIL10CVT368AVA 19
20. Disconnect the high pressure A/C pipe (1).
Disconnect the low pressure switch electrical connec-
tor (2).
BAIL12APH149AVA 20
21. Disconnect the charge air cooler intake pipe.
BAIL12APH150AVA 21
47665854 27/03/2014
10.1 [10.001] / 18
21. Engine - Engine and crankcase
22. Detach the A/C pipes and position it to one side.
BAIL12APH151AVA 22
23. Disconnect the steering hoses.
NOTE: Mark the hoses to aid installation.
BAIL07APH105AVB 23
24. Disconnect the fuel supply line from the pre-filter/wa-
ter trap.
BAIL12APH152AVA 24
25. Disconnect the fuel return line (1).
Disconnect the flywheel electrical connector (2).
BAIL12APH153AVA 25
47665854 27/03/2014
10.1 [10.001] / 19
22. Engine - Engine and crankcase
26. Cut the cable ties.
BAIL12APH154AVA 26
27. Cut the starter motor wiring harness cable ties.
BAIL12APH155AVA 27
28. Disconnect the engine earth connector.
BAIL10CVT433AVA 28
29. Disconnect the diff lock supply pipe (1) and pneumatic
brake supply pipe (2).
Remove the pipe retaining bracket (3) and remove the
pipes.
BAIL07APH379AVA 29
NOTE: Repeat the operation on both sides of the vehicle.
47665854 27/03/2014
10.1 [10.001] / 20
23. Engine - Engine and crankcase
30.
Vehicles with standard front axle
31. Remove the front wheel drive shaft guard and drive
shaft.
NOTE: The type of drive shaft fitted is dependant on type
of front axle installed.
BSD1959A 30
32. Remove the drive shaft flange, where fitted.
BSD1917A 31
Vehicles with suspended front axle
33. Remove the front wheel drive shaft guard.
BAIL12APH156AVA 32
47665854 27/03/2014
10.1 [10.001] / 21
24. Engine - Engine and crankcase
34. Remove the circlip (1).
Slide the drive shaft sleeve (2).
BAIL12APH182AVA 33
35. Disconnect the drive shaft bearing carrier.
BAIL12APH158AVA 34
All vehicles
36. Using the tractor splitting equipment 380040228 In-
stall the larger wheeled part of the splitting equipment
under the front weight carrier.
BAIL12APH159AVA 35
37. Position the static part of the splitting equipment under
the transmission and secure to the transmission.
Install the smaller wheeled part of the splitting equip-
ment under the engine.
BAIL12APH160AVA 36
47665854 27/03/2014
10.1 [10.001] / 22
25. Engine - Engine and crankcase
38. Connect the two pieces of the wheeled splitting gear
together with the alignment bar.
BAIL12APH161AVA 37
39. Support the rear of the vehicle.
BAIL07APH145AVA 38
40. Remove the left-hand side engine to transmission se-
curing bolts.
NOTE: Repeat this step for the right-hand side.
BAIL07APH146BVA 39
47665854 27/03/2014
10.1 [10.001] / 23
26. Engine - Engine and crankcase
41. Remove the centre engine to transmission securing
bolt (2). Remove the top left-hand engine to transmis-
sion securing bolt (1).
NOTE: Repeat this step for the right-hand side.
BAIL07APH147AVA 40
42. Separate the engine from the transmission.
BAIL12APH161AVA 41
47665854 27/03/2014
10.1 [10.001] / 24
27. Engine - Engine and crankcase
Engine - Connect
MAXXUM 115 EP NA
MAXXUM 115 Multicontroller EP NA
MAXXUM 125 EP NA
MAXXUM 125 Multicontroller EP NA
MAXXUM 140 EP NA
MAXXUM 140 Multicontroller EP NA
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
All vehicles
1. Thoroughly clean the engine to transmission mating
surfaces and apply a bead of sealant.
2. Align the front support and engine assembly to the
transmission and relocate.
Tighten to 285-315 Nm ( 210-232 lb ft).
BAIL12APH161AVA 1
47665854 27/03/2014
10.1 [10.001] / 25
28. Engine - Engine and crankcase
3. Install the centre engine to transmission securing bolt
(2). Install the top left hand engine to transmission se-
curing bolt (1). Tighten to 285-315 Nm ( 210-232 lb ft).
NOTE: Repeat this step for the right-hand side.
BAIL07APH147AVA 2
4. Install the left-hand side engine to transmission secur-
ing bolts.
NOTE: Repeat this step for the right-hand side.
BAIL07APH146BVA 3
5. Remove the support from the rear of the vehicle.
BAIL07APH145AVA 4
47665854 27/03/2014
10.1 [10.001] / 26
29. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
30. Engine - Engine and crankcase
6. Disconnect the two pieces of the wheeled splitting gear
380040228 by removing the alignment bar.
BAIL12APH161AVA 5
7. Remove the smaller wheeled part of the splitting equip-
ment from under the engine.
Remove the splitting equipment securing bolts from the
transmission.
Remove the splitting equipment from under the trans-
mission.
BAIL12APH160AVA 6
8. Place suitable axle stands under the front axle and sup-
port the vehicle. .
9. Remove the larger wheeled part of the splitting equip-
ment from under the front weight carrier.
BAIL12APH159AVA 7
47665854 27/03/2014
10.1 [10.001] / 27
31. Engine - Engine and crankcase
Vehicles with standard front axle
10. Install the drive shaft flange (if equipped).
BSD1917A 8
11. Install front wheel drive shaft and drive shaft guard.
NOTE: The type of drive shaft fitted is dependant on type
of front axle installed.
BSD1959A 9
12. Connect the drive shaft bearing carrier.
BAIL12APH158AVA 10
13. Slide the drive shaft sleeve (2) and install the circlip
(1).
BAIL12APH182AVA 11
47665854 27/03/2014
10.1 [10.001] / 28
32. Engine - Engine and crankcase
14. Install the front wheel drive shaft guard.
BAIL12APH156AVA 12
All vehicles
15. Connect the diff lock supply pipe (1) and pneumatic
brake supply pipe (2).
Install the pipe retaining bracket (3).
BAIL07APH379AVA 13
16. Connect the engine earth connector.
BAIL10CVT433AVA 14
47665854 27/03/2014
10.1 [10.001] / 29
33. Engine - Engine and crankcase
17. Install cable ties to the starter motor wiring harness.
BAIL12APH155AVA 15
18. Install cable ties.
BAIL12APH154AVA 16
19. Connect the brake valve supply hose (if fitted).
BAIL07APH056AVA 17
20. Connect the fuel return line (1).
Connect the flywheel electrical connector (2).
BAIL12APH153AVA 18
47665854 27/03/2014
10.1 [10.001] / 30
34. Engine - Engine and crankcase
21. Connect the fuel supply line to the pre-filter/water trap.
BAIL12APH152AVA 19
22. Connect the steering hoses.
BAIL07APH105AVB 20
23. Attach the A/C pipes
BAIL12APH151AVA 21
24. Connect the charge air cooler intake pipe.
BAIL12APH150AVA 22
47665854 27/03/2014
10.1 [10.001] / 31