This document provides a service manual for MAXXUM tractors. It includes sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The document provides detailed information on removing, installing, and repairing components within each system through detailed procedures and specifications.
Toro reelmaster 6700 d (kubota engine) mower service repair manualfujsjejfkskekem
This document is the service manual for the Reelmaster 6500-D/6700-D. It contains safety instructions, maintenance procedures, troubleshooting steps, and repair instructions for the machine's various systems. The manual instructs technicians to use this manual along with other relevant manuals, such as the Kubota engine manual, when servicing the machine. It provides important safety warnings and information for properly maintaining and repairing the Reelmaster.
Toro reelmaster 6500 d (peugeot engine) mower service repair manualfujsjejfkskekem
This document provides safety instructions for servicing the Reelmaster 6500-D and 6700-D. It outlines key safety practices including wearing protective equipment, reading manuals thoroughly before operating equipment, keeping children away from the area, avoiding loose clothing near moving parts, and handling fuel carefully. The instructions emphasize operating the machine only after understanding how to stop it quickly and making sure all safety devices are in good condition.
Toro reelmaster 5510 mower service repair manualfujsjejfkskekem
This service manual provides information for troubleshooting, testing, and repairing major systems and components of the Reelmaster 5010 series mowers, including the 5210, 5410, 5510, and 5610 models. It covers the product records, maintenance, Kubota diesel engine, hydraulic system, electrical system, chassis, cutting units, and groomer. Safety instructions are provided at the beginning to ensure safe operation, maintenance, and repair of the mowers.
Toro groundsmaster 4000 d service repair manualfujsjejfkskekem
This service manual provides information for technicians to troubleshoot, test, and repair major systems on the Toro Groundsmaster 4000-D utility vehicle. It includes chapters covering safety, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, and cutting units. Technicians should refer to operator's manuals for operating instructions and to original manufacturer manuals included for additional engine information.
Toro greensmaster flex 18 (04018) service repair manualfujsjejfkskekem
This document is a service manual that provides information for troubleshooting, testing, and repairing components of the Greensmaster Flex 18 and 21 models. It contains chapters covering safety, product records and maintenance, the engine, traction and reel drive systems, electrical systems, chassis and controls, cutting units, and groomers. Each chapter provides specifications, general information, and procedures for service and repairs of the relevant systems. Safety instructions are provided at the beginning, emphasizing the importance of following safety precautions when operating or servicing the mower.
This service manual provides information to service and repair components on the Greensmaster 1000/1600 golf course mower. It covers safety instructions, product records, the engine, traction and reel drive systems, electrical systems, controls, wheels, accessories, cutting units, and a grooming reel kit. Chapters provide specifications, adjustments, troubleshooting steps, and repair procedures for each system.
This document provides specifications and troubleshooting information for STIHL Series 4144 engine components, including the FC 56, FS 40/50/56, and KM 56 models. It covers the engine, fuel system, ignition system, tightening torques, and troubleshooting guides for the clutch, rewind starter, ignition system, carburetor, and engine. The document also provides instructions for servicing various engine components.
1975 johnson evinrude outboard 18 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
Toro reelmaster 6700 d (kubota engine) mower service repair manualfujsjejfkskekem
This document is the service manual for the Reelmaster 6500-D/6700-D. It contains safety instructions, maintenance procedures, troubleshooting steps, and repair instructions for the machine's various systems. The manual instructs technicians to use this manual along with other relevant manuals, such as the Kubota engine manual, when servicing the machine. It provides important safety warnings and information for properly maintaining and repairing the Reelmaster.
Toro reelmaster 6500 d (peugeot engine) mower service repair manualfujsjejfkskekem
This document provides safety instructions for servicing the Reelmaster 6500-D and 6700-D. It outlines key safety practices including wearing protective equipment, reading manuals thoroughly before operating equipment, keeping children away from the area, avoiding loose clothing near moving parts, and handling fuel carefully. The instructions emphasize operating the machine only after understanding how to stop it quickly and making sure all safety devices are in good condition.
Toro reelmaster 5510 mower service repair manualfujsjejfkskekem
This service manual provides information for troubleshooting, testing, and repairing major systems and components of the Reelmaster 5010 series mowers, including the 5210, 5410, 5510, and 5610 models. It covers the product records, maintenance, Kubota diesel engine, hydraulic system, electrical system, chassis, cutting units, and groomer. Safety instructions are provided at the beginning to ensure safe operation, maintenance, and repair of the mowers.
Toro groundsmaster 4000 d service repair manualfujsjejfkskekem
This service manual provides information for technicians to troubleshoot, test, and repair major systems on the Toro Groundsmaster 4000-D utility vehicle. It includes chapters covering safety, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, and cutting units. Technicians should refer to operator's manuals for operating instructions and to original manufacturer manuals included for additional engine information.
Toro greensmaster flex 18 (04018) service repair manualfujsjejfkskekem
This document is a service manual that provides information for troubleshooting, testing, and repairing components of the Greensmaster Flex 18 and 21 models. It contains chapters covering safety, product records and maintenance, the engine, traction and reel drive systems, electrical systems, chassis and controls, cutting units, and groomers. Each chapter provides specifications, general information, and procedures for service and repairs of the relevant systems. Safety instructions are provided at the beginning, emphasizing the importance of following safety precautions when operating or servicing the mower.
This service manual provides information to service and repair components on the Greensmaster 1000/1600 golf course mower. It covers safety instructions, product records, the engine, traction and reel drive systems, electrical systems, controls, wheels, accessories, cutting units, and a grooming reel kit. Chapters provide specifications, adjustments, troubleshooting steps, and repair procedures for each system.
This document provides specifications and troubleshooting information for STIHL Series 4144 engine components, including the FC 56, FS 40/50/56, and KM 56 models. It covers the engine, fuel system, ignition system, tightening torques, and troubleshooting guides for the clutch, rewind starter, ignition system, carburetor, and engine. The document also provides instructions for servicing various engine components.
1975 johnson evinrude outboard 18 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
1975 johnson evinrude outboard 15 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
Yamaha edl13000 te generator service repair manualfujsjejfkskekem
This service manual provides information for technicians to service a Yamaha generator. It includes specifications, maintenance procedures, troubleshooting guides, and exploded diagrams. Technicians are expected to have a basic understanding of generator repair. Safety warnings are marked throughout and instruct technicians to replace certain parts like gaskets during repairs. Special tools are also listed that may be required for some procedures.
Toro reelmaster 5410 mower service repair manualfujsjejfkskekem
This service manual provides information for troubleshooting, testing, and repairing major systems and components of the Reelmaster 5010 series mowers, including the 5210, 5410, 5510, and 5610 models. It covers the product records, maintenance, Kubota diesel engine, hydraulic system, electrical system, chassis, cutting units, and groomer. Safety instructions are provided at the beginning to ensure safe operation, maintenance, and repair of the mowers.
Toro reelmaster 3100 d mower service repair manualfujsjejfkskekem
This document is a service manual for the Reelmaster 3100-D that provides information for troubleshooting, testing, and repairing major systems and components. It directs technicians to refer to operator manuals for operating instructions and contains safety information for technicians performing maintenance and repairs. The manual is divided into chapters covering product records and manuals, the Kubota diesel engine, hydraulic system, electrical system, wheels/brakes, and cutting units.
Toro groundsmaster 7210 service repair manualfujsjejfkskekem
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Toro Groundsmaster 7200 and 7210 turf maintenance machines. It contains chapters covering safety, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, chassis, cutting deck, and foldout diagrams. Technicians are directed to use genuine Toro replacement parts for repairs to maintain safety certification. Proper jacking instructions and safety precautions are also provided when working on the machine.
Toro groundsmaster 580 d mower service repair manualfujsjejfkskekem
This document provides safety instructions for operating, maintaining, and servicing the Groundsmaster 580-D. It outlines important safety precautions that must be followed before, during, and after operating the machine. Personal protective equipment is recommended, as are daily checks of safety devices and controls. Proper maintenance and avoiding distractions are emphasized to prevent accidents and injury.
Toro groundsmaster 455 d mower service repair manualfujsjejfkskekem
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Groundsmaster 455-D. It contains specifications, diagrams, maintenance procedures, and safety instructions. Technicians should follow all safety procedures when working on the machine to prevent injury.
Toro greensmaster flex 21 service repair manualfujsjejfkskekem
This document is a service manual for the Greensmaster Flex 21 that provides technicians with information to troubleshoot, test, and repair components. It instructs technicians to refer to the operator's manual for operating instructions and maintenance. The manual contains several chapters covering the engine, drive systems, electrical systems, cutting units, and safety information. It provides specifications, adjustments, repairs, and troubleshooting guides for each system to assist technicians in servicing the machine.
This service manual provides information for technicians to troubleshoot, test, and repair major systems and components of the Greensmaster 3100 and 3050 golf course mowers. It contains chapters covering the engine, hydraulic system, electrical system, wheels/steering/brakes, various cutting unit types, and safety information. Technicians should follow the safety instructions when operating or performing maintenance on the mowers.
The document provides specifications and repair procedures for STIHL MS 341 and MS 361 chainsaws. It covers topics such as the engine, fuel system, ignition system, clutch, chain drive, brake, rewind starter, carburetor, and other systems. Troubleshooting charts are provided for issues like the clutch not engaging properly, the starter rope breaking or not rewinding, and other problems. Detailed steps are outlined for repairs, with specifications on torque and tools required.
Stihl km 56 kombi motor service repair manualfujsjejfkskekem
This document provides specifications and troubleshooting information for STIHL Series 4144 engine components, including the FC 56, FS 40/50/56, and KM 56 models. It covers the engine, fuel system, ignition system, tightening torques, and troubleshooting guides for the clutch, rewind starter, ignition system, carburetor, and engine. The document also includes sections on removing and installing various engine components and systems.
Stihl km 55 kombi motor service repair manualfujsjejfkskekem
This document provides specifications and troubleshooting information for STIHL components 4140 FC, FS, HL, KM from 2003-2010. It covers topics such as fuel system specifications, gearbox types, tightening torques, and troubleshooting issues with the clutch, rewind starter, fuel system, and engine. Procedures for servicing components like the carburetor, rewind starter, throttle control, and fuel system are also described. The document aims to aid repair shops in servicing and repairing these STIHL machines.
Stihl hl 45 hedge trimmer service repair manualfujsjejfkskekem
This document provides service information for STIHL models FS 45, 46, 55, FC 55, HL 45, and KM 55 powerheads. It covers specifications, safety precautions, troubleshooting, and repair procedures for engine components such as the rewind starter, throttle control, fuel system, and drive tube. Detailed instructions are given for removing, installing, and servicing parts, along with required tools and torque specifications for fasteners.
This document provides specifications and troubleshooting information for the STIHL Series 4144 Powerhead used on several models from 2008-01. It includes the following sections:
1. Introduction
2. Safety Precautions
3. Specifications on the engine, ignition system, and tightening torques
4. Troubleshooting for the clutch and ignition system
5. Instructions for servicing the clutch drum
6. Instructions for servicing the engine
7. Instructions for servicing the ignition system
8. List of special servicing tools
9. Notes on servicing aids
The document provides detailed repair instructions, specifications, and troubleshooting tips for technicians servicing the STIHL Series 4
This document provides specifications and repair instructions for STIHL chain saw models 034, 036, and 036 QS. It includes details on the engine, fuel system, ignition system, cutting attachment, tightening torques, and repair procedures for various components such as the clutch, chain brake, cylinder, and ignition system. The document aims to aid service technicians in repairing and servicing these chain saw models by STIHL.
1975 johnson evinrude outboard 9.9 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
This service manual provides information for servicing Kohler SV710-SV840 series engines. It contains sections on safety, maintenance, specifications, tools, troubleshooting, and repair/replacement of engine systems. The maintenance section outlines routine maintenance tasks such as oil and filter changes and component inspections. The specifications section lists physical dimensions, torque specifications, and other technical details. Dismantling and reassembly procedures are provided for repairing engine components and systems.
This service manual provides information on maintenance, specifications, troubleshooting, and repair procedures for Kohler SV710-SV840 engines. The manual covers safety precautions, maintenance schedules and procedures, specifications, tools required for repair, and step-by-step disassembly/reassembly instructions. Torque specifications and clearance specifications are provided for engine components. The manual also includes parts identification numbers and diagrams.
Kohler courage sv620 vertical crankshaft engine service repair manualfujsjejfkskekem
This document provides specifications and maintenance instructions for Kohler SV470-SV620 engines. It includes sections on safety, maintenance, specifications, tools and aids, troubleshooting, and disassembly/reassembly. The maintenance schedule recommends procedures such as changing the oil every 100 hours and adjusting the valves every 200 hours. The specifications section lists engine dimensions, identification numbers, displacement, oil capacity, and torque specifications for fasteners.
1964 johnson evinrude outboard 18 hp service repair manualfujsjejfkskekem
This document provides specifications for starter rope diameter and length for various engine sizes and model years of outboard motors. It lists the engine size in horsepower, model year, rope diameter in inches, and rope length range in inches. For example, it lists that for a 1.5 hp engine from 1968-1970 the starter rope diameter is 3/82712 inches. It provides this data in a table format for various engine sizes from 1.5 hp to 40 hp made between 1956-1970.
1975 johnson evinrude outboard 15 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
Yamaha edl13000 te generator service repair manualfujsjejfkskekem
This service manual provides information for technicians to service a Yamaha generator. It includes specifications, maintenance procedures, troubleshooting guides, and exploded diagrams. Technicians are expected to have a basic understanding of generator repair. Safety warnings are marked throughout and instruct technicians to replace certain parts like gaskets during repairs. Special tools are also listed that may be required for some procedures.
Toro reelmaster 5410 mower service repair manualfujsjejfkskekem
This service manual provides information for troubleshooting, testing, and repairing major systems and components of the Reelmaster 5010 series mowers, including the 5210, 5410, 5510, and 5610 models. It covers the product records, maintenance, Kubota diesel engine, hydraulic system, electrical system, chassis, cutting units, and groomer. Safety instructions are provided at the beginning to ensure safe operation, maintenance, and repair of the mowers.
Toro reelmaster 3100 d mower service repair manualfujsjejfkskekem
This document is a service manual for the Reelmaster 3100-D that provides information for troubleshooting, testing, and repairing major systems and components. It directs technicians to refer to operator manuals for operating instructions and contains safety information for technicians performing maintenance and repairs. The manual is divided into chapters covering product records and manuals, the Kubota diesel engine, hydraulic system, electrical system, wheels/brakes, and cutting units.
Toro groundsmaster 7210 service repair manualfujsjejfkskekem
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Toro Groundsmaster 7200 and 7210 turf maintenance machines. It contains chapters covering safety, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, chassis, cutting deck, and foldout diagrams. Technicians are directed to use genuine Toro replacement parts for repairs to maintain safety certification. Proper jacking instructions and safety precautions are also provided when working on the machine.
Toro groundsmaster 580 d mower service repair manualfujsjejfkskekem
This document provides safety instructions for operating, maintaining, and servicing the Groundsmaster 580-D. It outlines important safety precautions that must be followed before, during, and after operating the machine. Personal protective equipment is recommended, as are daily checks of safety devices and controls. Proper maintenance and avoiding distractions are emphasized to prevent accidents and injury.
Toro groundsmaster 455 d mower service repair manualfujsjejfkskekem
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Groundsmaster 455-D. It contains specifications, diagrams, maintenance procedures, and safety instructions. Technicians should follow all safety procedures when working on the machine to prevent injury.
Toro greensmaster flex 21 service repair manualfujsjejfkskekem
This document is a service manual for the Greensmaster Flex 21 that provides technicians with information to troubleshoot, test, and repair components. It instructs technicians to refer to the operator's manual for operating instructions and maintenance. The manual contains several chapters covering the engine, drive systems, electrical systems, cutting units, and safety information. It provides specifications, adjustments, repairs, and troubleshooting guides for each system to assist technicians in servicing the machine.
This service manual provides information for technicians to troubleshoot, test, and repair major systems and components of the Greensmaster 3100 and 3050 golf course mowers. It contains chapters covering the engine, hydraulic system, electrical system, wheels/steering/brakes, various cutting unit types, and safety information. Technicians should follow the safety instructions when operating or performing maintenance on the mowers.
The document provides specifications and repair procedures for STIHL MS 341 and MS 361 chainsaws. It covers topics such as the engine, fuel system, ignition system, clutch, chain drive, brake, rewind starter, carburetor, and other systems. Troubleshooting charts are provided for issues like the clutch not engaging properly, the starter rope breaking or not rewinding, and other problems. Detailed steps are outlined for repairs, with specifications on torque and tools required.
Stihl km 56 kombi motor service repair manualfujsjejfkskekem
This document provides specifications and troubleshooting information for STIHL Series 4144 engine components, including the FC 56, FS 40/50/56, and KM 56 models. It covers the engine, fuel system, ignition system, tightening torques, and troubleshooting guides for the clutch, rewind starter, ignition system, carburetor, and engine. The document also includes sections on removing and installing various engine components and systems.
Stihl km 55 kombi motor service repair manualfujsjejfkskekem
This document provides specifications and troubleshooting information for STIHL components 4140 FC, FS, HL, KM from 2003-2010. It covers topics such as fuel system specifications, gearbox types, tightening torques, and troubleshooting issues with the clutch, rewind starter, fuel system, and engine. Procedures for servicing components like the carburetor, rewind starter, throttle control, and fuel system are also described. The document aims to aid repair shops in servicing and repairing these STIHL machines.
Stihl hl 45 hedge trimmer service repair manualfujsjejfkskekem
This document provides service information for STIHL models FS 45, 46, 55, FC 55, HL 45, and KM 55 powerheads. It covers specifications, safety precautions, troubleshooting, and repair procedures for engine components such as the rewind starter, throttle control, fuel system, and drive tube. Detailed instructions are given for removing, installing, and servicing parts, along with required tools and torque specifications for fasteners.
This document provides specifications and troubleshooting information for the STIHL Series 4144 Powerhead used on several models from 2008-01. It includes the following sections:
1. Introduction
2. Safety Precautions
3. Specifications on the engine, ignition system, and tightening torques
4. Troubleshooting for the clutch and ignition system
5. Instructions for servicing the clutch drum
6. Instructions for servicing the engine
7. Instructions for servicing the ignition system
8. List of special servicing tools
9. Notes on servicing aids
The document provides detailed repair instructions, specifications, and troubleshooting tips for technicians servicing the STIHL Series 4
This document provides specifications and repair instructions for STIHL chain saw models 034, 036, and 036 QS. It includes details on the engine, fuel system, ignition system, cutting attachment, tightening torques, and repair procedures for various components such as the clutch, chain brake, cylinder, and ignition system. The document aims to aid service technicians in repairing and servicing these chain saw models by STIHL.
1975 johnson evinrude outboard 9.9 hp service repair manualfujsjejfkskekem
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
This service manual provides information for servicing Kohler SV710-SV840 series engines. It contains sections on safety, maintenance, specifications, tools, troubleshooting, and repair/replacement of engine systems. The maintenance section outlines routine maintenance tasks such as oil and filter changes and component inspections. The specifications section lists physical dimensions, torque specifications, and other technical details. Dismantling and reassembly procedures are provided for repairing engine components and systems.
This service manual provides information on maintenance, specifications, troubleshooting, and repair procedures for Kohler SV710-SV840 engines. The manual covers safety precautions, maintenance schedules and procedures, specifications, tools required for repair, and step-by-step disassembly/reassembly instructions. Torque specifications and clearance specifications are provided for engine components. The manual also includes parts identification numbers and diagrams.
Kohler courage sv620 vertical crankshaft engine service repair manualfujsjejfkskekem
This document provides specifications and maintenance instructions for Kohler SV470-SV620 engines. It includes sections on safety, maintenance, specifications, tools and aids, troubleshooting, and disassembly/reassembly. The maintenance schedule recommends procedures such as changing the oil every 100 hours and adjusting the valves every 200 hours. The specifications section lists engine dimensions, identification numbers, displacement, oil capacity, and torque specifications for fasteners.
1964 johnson evinrude outboard 18 hp service repair manualfujsjejfkskekem
This document provides specifications for starter rope diameter and length for various engine sizes and model years of outboard motors. It lists the engine size in horsepower, model year, rope diameter in inches, and rope length range in inches. For example, it lists that for a 1.5 hp engine from 1968-1970 the starter rope diameter is 3/82712 inches. It provides this data in a table format for various engine sizes from 1.5 hp to 40 hp made between 1956-1970.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
2. SERVICE MANUAL
MAXXUM 110 EP , MAXXUM 110 Multicontroller EP , MAXXUM 115 EP
, MAXXUM 115 Multicontroller EP , MAXXUM 120 EP , MAXXUM 120
Multicontroller EP , MAXXUM 125 EP , MAXXUM 125 Multicontroller EP ,
MAXXUM 130 EP , MAXXUM 130 Multicontroller EP , MAXXUM 140 EP ,
MAXXUM 140 Multicontroller EP , MAXXUM CVX 110 , MAXXUM CVX 120
, MAXXUM CVX 130
47665845 26/02/2014
EN
3. Link Product / Engine
Product Market Product Engine
MAXXUM CVX 110 Europe F4DFE413C*A
MAXXUM CVX 120 Europe F4DFE413B*A
MAXXUM CVX 130 Europe F4DFE413A*A
MAXXUM 110 EP Europe F4DFE413E*A
MAXXUM 110 Multicontroller EP Europe F4DFE413C*A
MAXXUM 115 EP Europe F4DFE613F*A
MAXXUM 115 Multicontroller EP Europe F4DFE613F*A
MAXXUM 120 EP Europe F4DFE413D*A
MAXXUM 120 Multicontroller EP Europe F4DFE413B*A
MAXXUM 125 EP Europe F4DFE613E*A
MAXXUM 125 Multicontroller EP Europe F4DFE613E*A
MAXXUM 130 EP Europe F4DFE413C*A
MAXXUM 130 Multicontroller EP Europe F4DFE413A*A
MAXXUM 140 EP Europe F4DFE6132*A
MAXXUM 140 Multicontroller EP Europe F4DFE6132*A
47665845 26/02/2014
10. INTRODUCTION
Foreword
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the CASE IH
Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed.
47665845 26/02/2014
3
11. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
47665845 26/02/2014
4
12. SERVICE MANUAL
Engine
MAXXUM 110 EP , MAXXUM 110 Multicontroller EP , MAXXUM 115 EP
, MAXXUM 115 Multicontroller EP , MAXXUM 120 EP , MAXXUM 120
Multicontroller EP , MAXXUM 125 EP , MAXXUM 125 Multicontroller EP ,
MAXXUM 130 EP , MAXXUM 130 Multicontroller EP , MAXXUM 140 EP ,
MAXXUM 140 Multicontroller EP , MAXXUM CVX 110 , MAXXUM CVX 120
, MAXXUM CVX 130
47665845 26/02/2014
10
13. Engine - Engine and crankcase
Engine - Disconnect
MAXXUM 115 EP WE
MAXXUM 115 Multicontroller EP WE
MAXXUM 125 EP WE
MAXXUM 125 Multicontroller EP WE
MAXXUM 140 EP WE
MAXXUM 140 Multicontroller EP WE
Prior operation:
Discharge the Air conditioning system, for further information refer to Air conditioning - Discharging (50.200)
Prior operation:
Disconnect battery, for further information refer to Battery - Disconnect (55.302)
Prior operation:
Drain the engine coolant system, for further information refer to Engine cooling system - Drain fluid (10.400)
Prior operation:
Remove the selective catalytic reduction (SRC) muffler, for further information refer to Selective Catalytic Reduction
(SCR) muffler and catalyst - Remove (10.500)
Prior operation:
Remove the selective catalytic reduction (SRC) coolant control valve, for further information refer to Coolant control
valve - Remove (10.500)
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
1. Using suitable lifting equipment support the front
weights.
BAIL08CVT011AVA 1
47665845 26/02/2014
10.1 [10.001] / 13
14. Engine - Engine and crankcase
2. Disconnect and remove the front weights from the
weight carrier.
BAIL08CVT012AVA 2
3. Disconnect the radar electrical connector and remove
the radar (if fitted).
BAIL10CVT358AVA 3
4. Remove the flywheel speed sensor.
BAIS06CCM087AVA 4
5. Disconnect the engine harness electrical connectors.
BAIL12APH142AVA 5
47665845 26/02/2014
10.1 [10.001] / 14
15. Engine - Engine and crankcase
6. Detach the cab heater return pipe.
BAIL07APH121AVA 6
7. Disconnect the oil cooler supply pipes.
BAIL12APH143AVA 7
8. Disconnect the oil cooler supply and return pipes (1).
Remove the oil cooler pipes (2).
BAIL12APH144AVA 8
9. Disconnect the heater supply hose from the rear of the
engine cylinder head.
BAIL12APH145AVA 9
47665845 26/02/2014
10.1 [10.001] / 15
16. Engine - Engine and crankcase
10. Remove the starter motor heat shield.
BAIL12APH146AVA 10
11. Remove the starter motor cover.
BAIL10CVT361AVA 11
12. Disconnect the starter motor electrical connector.
BAIL10CVT363AVA 12
13. Disconnect the positive terminal (1), negative terminal
(2) relay and bracket (3) and position to one side.
BAIL12APH147AVA 13
47665845 26/02/2014
10.1 [10.001] / 16
17. Engine - Engine and crankcase
14. Disconnect the starter motor negative cables.
BAIL10CVT364AVA 14
15. Detach the alternator wiring harness electrical con-
nector from the bracket (1) and detach the wiring har-
ness (2).
BAIL10CVT365AVA 15
16. Disconnect the alternator electrical connectors.
BAIL10CVT366AVA 16
17. Disconnect the brake fluid reservoir electrical connec-
tor (1) and detach the brake fluid reservoir (2) and po-
sition it to one side.
BAIL10CVT367AVA 17
47665845 26/02/2014
10.1 [10.001] / 17
18. Engine - Engine and crankcase
18. Remove the front brake retaining bracket (1) and re-
move the front brake pipe (2).
BAIL12APH148AVA 18
19. Disconnect the A/C pipe from the A/C compressor.
NOTE: Install blanking plugs/caps to all openings to pre-
vent dirt ingress.
BAIL10CVT368AVA 19
20. Disconnect the high pressure A/C pipe (1).
Disconnect the low pressure switch electrical connec-
tor (2).
BAIL12APH149AVA 20
21. Disconnect the charge air cooler intake pipe.
BAIL12APH150AVA 21
47665845 26/02/2014
10.1 [10.001] / 18
19. Engine - Engine and crankcase
22. Detach the A/C pipes and position it to one side.
BAIL12APH151AVA 22
23. Disconnect the steering hoses.
NOTE: Mark the hoses to aid installation.
BAIL07APH105AVB 23
24. Disconnect the fuel supply line from the pre-filter/wa-
ter trap.
BAIL12APH152AVA 24
25. Disconnect the fuel return line (1).
Disconnect the flywheel electrical connector (2).
BAIL12APH153AVA 25
47665845 26/02/2014
10.1 [10.001] / 19
20. Engine - Engine and crankcase
26. Cut the cable ties.
BAIL12APH154AVA 26
27. Cut the starter motor wiring harness cable ties.
BAIL12APH155AVA 27
28. Disconnect the engine earth connector.
BAIL10CVT433AVA 28
29. Disconnect the diff lock supply pipe (1) and pneumatic
brake supply pipe (2).
Remove the pipe retaining bracket (3) and remove the
pipes.
BAIL07APH379AVA 29
NOTE: Repeat the operation on both sides of the vehicle.
47665845 26/02/2014
10.1 [10.001] / 20
21. Engine - Engine and crankcase
30.
Vehicles with standard front axle
31. Remove the front wheel drive shaft guard and drive
shaft.
NOTE: The type of drive shaft fitted is dependant on type
of front axle installed.
BSD1959A 30
32. Remove the drive shaft flange, where fitted.
BSD1917A 31
Vehicles with suspended front axle
33. Remove the front wheel drive shaft guard.
BAIL12APH156AVA 32
47665845 26/02/2014
10.1 [10.001] / 21
22. Engine - Engine and crankcase
34. Remove the circlip (1).
Slide the drive shaft sleeve (2).
BAIL12APH182AVA 33
35. Disconnect the drive shaft bearing carrier.
BAIL12APH158AVA 34
All vehicles
36. Using the tractor splitting equipment 380040228 In-
stall the larger wheeled part of the splitting equipment
under the front weight carrier.
BAIL12APH159AVA 35
37. Position the static part of the splitting equipment under
the transmission and secure to the transmission.
Install the smaller wheeled part of the splitting equip-
ment under the engine.
BAIL12APH160AVA 36
47665845 26/02/2014
10.1 [10.001] / 22
23. Engine - Engine and crankcase
38. Connect the two pieces of the wheeled splitting gear
together with the alignment bar.
BAIL12APH161AVA 37
39. Support the rear of the vehicle.
BAIL07APH145AVA 38
40. Remove the left-hand side engine to transmission se-
curing bolts.
NOTE: Repeat this step for the right-hand side.
BAIL07APH146BVA 39
47665845 26/02/2014
10.1 [10.001] / 23
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Engine - Engine and crankcase
41. Remove the centre engine to transmission securing
bolt (2). Remove the top left-hand engine to transmis-
sion securing bolt (1).
NOTE: Repeat this step for the right-hand side.
BAIL07APH147AVA 40
42. Separate the engine from the transmission.
BAIL12APH161AVA 41
47665845 26/02/2014
10.1 [10.001] / 24
26. Engine - Engine and crankcase
Engine - Connect
MAXXUM 115 EP WE
MAXXUM 115 Multicontroller EP WE
MAXXUM 125 EP WE
MAXXUM 125 Multicontroller EP WE
MAXXUM 140 EP WE
MAXXUM 140 Multicontroller EP WE
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
All vehicles
1. Thoroughly clean the engine to transmission mating
surfaces and apply a bead of sealant.
2. Align the front support and engine assembly to the
transmission and relocate.
Tighten to 285-315 Nm ( 210-232 lb ft).
BAIL12APH161AVA 1
47665845 26/02/2014
10.1 [10.001] / 25
27. Engine - Engine and crankcase
3. Install the centre engine to transmission securing bolt
(2). Install the top left hand engine to transmission se-
curing bolt (1). Tighten to 285-315 Nm ( 210-232 lb ft).
NOTE: Repeat this step for the right-hand side.
BAIL07APH147AVA 2
4. Install the left-hand side engine to transmission secur-
ing bolts.
NOTE: Repeat this step for the right-hand side.
BAIL07APH146BVA 3
5. Remove the support from the rear of the vehicle.
BAIL07APH145AVA 4
47665845 26/02/2014
10.1 [10.001] / 26