The document is a repair manual for Case IH JX1075N-JX1095N tractors. It contains sections on the engine, transmission, brakes, hydraulics, steering, climate control, electrical systems, cab/bodywork and other components. Each section includes chapters that provide information on maintenance, repair, specifications and safety procedures for that system. The manual is intended exclusively for use by authorized Case IH service technicians and aims to ensure repairs are performed correctly.
Case ih jx1075 n tractor service repair manualfujsjekfkkseme
This document is a repair manual for Case IH JX1075N-JX1095N tractors. It contains sections covering the engine, transmission, brakes, hydraulics, steering, climate control, electrical systems, cab, and other components. Each section includes chapters that provide instructions and specifications for repairing and maintaining the various tractor systems. Safety precautions are outlined to ensure repairs are performed correctly.
Case ih jx1095 c tractor service repair manualfusjejfjskekme
This document provides guidance on health and safety precautions for working with various chemicals and materials that may be encountered when servicing agricultural equipment. It lists hazards associated with acids, alkalis, solvents, fuels, dusts, fumes, and other substances. Precautions are outlined for proper use of protective equipment and first aid procedures in the event of exposure. The document aims to inform repair technicians about handling materials safely.
Case ih farmall 85 u tractor service repair manualfuhsejskekmmm
The document is a repair manual that provides health and safety information for working with various hazardous materials that may be encountered when servicing agricultural equipment. It lists numerous chemicals, gases, and other substances along with associated hazards and safety precautions. Do's and don'ts are outlined, and first aid procedures are referenced. The document emphasizes the importance of following safety precautions when handling potentially dangerous materials.
Case ih jx1090 u tractor service repair manualufjjsjefkkekmme
This document provides health and safety precautions and guidelines for working with various hazardous materials that may be encountered when repairing agricultural equipment, such as acids, alkalis, solvents, dusts, fumes, and fire risks. It outlines dos and don'ts, and what to do in emergency situations requiring first aid. Protective equipment is recommended, and handling, storage and disposal of hazardous substances should follow legal regulations.
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections on the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. Safety precautions and instructions are provided at the beginning for technicians to follow when performing repairs.
CASE IH JX1095N Tractor Service Repair Manual.pdffujsekkmdmd
This document is a repair manual for Case IH tractors models JX1075N through JX1095N. It contains safety and technical information for working on and repairing components of the tractors. The manual is divided into multiple sections that cover general information, the engine, transmission, brakes, hydraulics, electrical systems, and other components. Safety precautions are provided throughout for working with hazardous materials and operating machinery.
CASE IH JX1095N Tractor Service Repair Manual Instant Download.pdfhuanbu41474704
This document is a repair manual for Case IH tractors models JX1075N through JX1095N. It contains safety and technical information for working on and repairing components of the tractors. The manual is divided into multiple sections that cover general information, the engine, transmission, brakes, hydraulics, electrical systems, and other components. Safety precautions are provided throughout for working with hazardous materials and operating machinery.
CASE IH JX1095N Tractor Service Repair Manual Instant Download.pdfbugukua0303629
This document is a repair manual for Case IH tractors JX1075N through JX1095N. It contains sections covering various tractor systems and components. The sections are numbered and titled, with page numbers listed but no content shown. An introduction provides the manual and section details. Safety information and general instructions are provided at the start regarding repair procedures, hardware, emissions, and consumables.
Case ih jx1075 n tractor service repair manualfujsjekfkkseme
This document is a repair manual for Case IH JX1075N-JX1095N tractors. It contains sections covering the engine, transmission, brakes, hydraulics, steering, climate control, electrical systems, cab, and other components. Each section includes chapters that provide instructions and specifications for repairing and maintaining the various tractor systems. Safety precautions are outlined to ensure repairs are performed correctly.
Case ih jx1095 c tractor service repair manualfusjejfjskekme
This document provides guidance on health and safety precautions for working with various chemicals and materials that may be encountered when servicing agricultural equipment. It lists hazards associated with acids, alkalis, solvents, fuels, dusts, fumes, and other substances. Precautions are outlined for proper use of protective equipment and first aid procedures in the event of exposure. The document aims to inform repair technicians about handling materials safely.
Case ih farmall 85 u tractor service repair manualfuhsejskekmmm
The document is a repair manual that provides health and safety information for working with various hazardous materials that may be encountered when servicing agricultural equipment. It lists numerous chemicals, gases, and other substances along with associated hazards and safety precautions. Do's and don'ts are outlined, and first aid procedures are referenced. The document emphasizes the importance of following safety precautions when handling potentially dangerous materials.
Case ih jx1090 u tractor service repair manualufjjsjefkkekmme
This document provides health and safety precautions and guidelines for working with various hazardous materials that may be encountered when repairing agricultural equipment, such as acids, alkalis, solvents, dusts, fumes, and fire risks. It outlines dos and don'ts, and what to do in emergency situations requiring first aid. Protective equipment is recommended, and handling, storage and disposal of hazardous substances should follow legal regulations.
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections on the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. Safety precautions and instructions are provided at the beginning for technicians to follow when performing repairs.
CASE IH JX1095N Tractor Service Repair Manual.pdffujsekkmdmd
This document is a repair manual for Case IH tractors models JX1075N through JX1095N. It contains safety and technical information for working on and repairing components of the tractors. The manual is divided into multiple sections that cover general information, the engine, transmission, brakes, hydraulics, electrical systems, and other components. Safety precautions are provided throughout for working with hazardous materials and operating machinery.
CASE IH JX1095N Tractor Service Repair Manual Instant Download.pdfhuanbu41474704
This document is a repair manual for Case IH tractors models JX1075N through JX1095N. It contains safety and technical information for working on and repairing components of the tractors. The manual is divided into multiple sections that cover general information, the engine, transmission, brakes, hydraulics, electrical systems, and other components. Safety precautions are provided throughout for working with hazardous materials and operating machinery.
CASE IH JX1095N Tractor Service Repair Manual Instant Download.pdfbugukua0303629
This document is a repair manual for Case IH tractors JX1075N through JX1095N. It contains sections covering various tractor systems and components. The sections are numbered and titled, with page numbers listed but no content shown. An introduction provides the manual and section details. Safety information and general instructions are provided at the start regarding repair procedures, hardware, emissions, and consumables.
CASE IH JX1095N Tractor Service Repair Manual Instant Download.pdfruan49549560
This document is a repair manual for Case IH tractors models JX1075N through JX1095N. It contains safety and technical information for working on and repairing components of the tractors. The manual is divided into multiple sections that cover general information, the engine, transmission, brakes, hydraulics, electrical systems, and other components. Safety precautions are provided throughout for working with hazardous materials and operating machinery.
CASE IH JX1075N Tractor Service Repair Manual.pdffujsekkmdmd
This document is a repair manual for Case IH tractors models JX1075N through JX1095N. It contains safety and technical information for working on and repairing components of the tractors. The manual is divided into multiple sections that cover general information, the engine, transmission, brakes, hydraulics, electrical systems, and other components. Safety precautions are provided throughout for working with hazardous materials and operating machinery.
Case ih jx95 tractor service repair manualjjskefkskemik
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections on the engine, clutch, transmissions, brakes, hydraulics and other systems. The manual provides instructions and safety information for technicians performing repairs and maintenance on these tractors.
Case ih jx60 tractor service repair manualfjsjekksemm
The document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections on the engine, clutch, transmissions, brakes, hydraulics and other systems. The manual provides instructions and safety information for technicians performing maintenance and repairs.
Case ih jx90 tractor service repair manualjjskefkskemik
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections on the engine, clutch, transmissions, brakes, hydraulics and other systems. The manual provides instructions and safety information for technicians performing repairs and maintenance on these tractors.
Case ih jx1095 n tractor service repair manualfujsjekfkkseme
This document is a repair manual for Case IH JX1075N-JX1095N tractors. It contains sections covering the engine, transmission, brakes, hydraulics, steering, climate control, electrical systems, and bodywork. Each section includes chapters that provide instructions and specifications for repairing and maintaining components in that system. Safety precautions are outlined to ensure repairs are performed correctly.
Case ih jx1070 c tractor service repair manualfjjjskekksmem
This document contains a repair manual for CNH America LLC tractor models JX1060C, JX1070C, JX1075C, JX1085C, and JX1095C. The manual includes sections covering the engine, clutch, transmissions, transfer box, front and rear axles, braking system, hydraulic system, steering, wheels, air conditioning, electrical system, and other components. Safety precautions and instructions are provided at the beginning for technicians to follow when performing maintenance and repairs.
Case ih jx1060 c tractor service repair manualfjjjskekksmem
This document provides guidance on health and safety precautions for working with various chemicals and materials. It lists hazards associated with acids, alkalis, solvents, fire, dust, electric shock, exhaust fumes, and other substances. Do's and don'ts are outlined, and first aid information is included to ensure safety when handling these materials.
Case ih jx1060 c tractor service repair manualfdjjjsekkskemm
This document provides health and safety precautions and guidelines for working with various chemicals and materials that may be encountered when servicing agricultural equipment. It lists hazards from acids, alkalis, solvents, fuels, dusts, fumes, and other substances. Precautions are given for safe handling, storage, first aid, and avoiding risks of fire, electric shock, inhalation, and contact with skin or eyes. Proper protective equipment and ventilation are advised.
Case ih jx1075 c tractor service repair manualfjjjskekksmem
This document is a repair manual for CNH America LLC tractor models JX1060C, JX1070C, JX1075C, JX1085C, and JX1095C. It contains sections on general information, the engine, clutch, transmissions, transfer boxes, axles, braking systems, hydraulics, steering, wheels, air conditioning, electrical systems, and other components. The manual provides instructions and safety information for technicians repairing and maintaining components of the listed tractor models.
Case ih jx1070 c tractor service repair manualfdjjjsekkskemm
This document provides guidance on health and safety precautions for working with various chemicals and materials. It lists hazards associated with acids, alkalis, solvents, fire, dust, electric shock, exhaust fumes, and other substances. Do's and don'ts are outlined, and first aid information is included to ensure safety when handling these materials.
CASE IH JX80 Tractor Service Repair Manual.pdffujsekdmmdm
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections covering the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. The document provides an overview of the manual's contents and structure for technicians to reference when repairing systems on the listed tractor models.
CASE IH JX95 Tractor Service Repair Manual.pdffujsekdmmdm
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections covering the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. The document provides an overview of the manual's contents and structure for technicians to reference when repairing systems on the listed tractor models.
CASE IH JX60 Tractor Service Repair Manual.pdffujsekdmmdm
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections covering the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. The document provides an overview of the manual's contents and structure for technicians to reference when repairing systems on the listed tractor models.
CASE IH JX90 Tractor Service Repair Manual.pdffujsekdmmdm
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections covering the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. The document provides an overview of the manual's contents and structure for technicians to reference when repairing systems on the listed tractor models.
CASE IH JX70 Tractor Service Repair Manual.pdffujsekdmmdm
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections covering the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. The document provides an overview of the manual's contents and structure for technicians to reference when repairing systems on the listed tractor models.
Case ih jx1070 c tractor service repair manualfjjskekskem
This document contains sections from a repair manual for CNH America LLC tractor models JX1060C, JX1070C, JX1075C, JX1085C, and JX1095C. It lists the table of contents for each section of the repair manual, including the engine, clutch, transmissions, front and rear axles, braking system, hydraulic system, steering, and electrical system. The document provides an overview of the complete contents and organization of the repair manual for servicing and repairing the listed tractor models.
The document is a repair manual that provides safety instructions and guidelines for working with hazardous materials that may be encountered during maintenance and repair of agricultural equipment. It addresses proper handling of acids, alkalis, solvents, welding materials, dusts, and other potential hazards. Precautions are outlined for different situations to avoid injury and comply with legal requirements for working with chemicals.
Case ih jx1075 c tractor service repair manualfjjskekskem
This document contains sections from a repair manual for CNH America LLC tractor models JX1060C, JX1070C, JX1075C, JX1085C, and JX1095C. It lists the table of contents for each section of the repair manual, including the engine, clutch, transmissions, front and rear axles, braking system, hydraulic system, steering, and electrical system. The document provides an overview of the complete contents and organization of the repair manual for servicing and repairing these tractor models.
This document contains sections from a repair manual for CNH America LLC tractor models JX1060C, JX1070C, JX1075C, JX1085C, and JX1095C. It lists the table of contents for each section of the repair manual, including the engine, clutch, transmissions, front and rear axles, braking system, hydraulic system, steering, and electrical system. The document provides an overview of the complete contents and organization of the repair manual for servicing and repairing these tractor models.
Hyster n006 (h7.0 ft) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models ranging from 7,007 to 8,775 kg
- Tire sizes, fuel capacities, fluid capacities, and specifications for engines, transmissions, hydraulics, and other components
- Procedures for removing a drive axle which include draining fluids, removing mounting hardware, and disassembling related systems
Hyster l006 (h6.0 ft europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle from the lift trucks
More Related Content
Similar to Case ih jx1075 n tractor service repair manual
CASE IH JX1095N Tractor Service Repair Manual Instant Download.pdfruan49549560
This document is a repair manual for Case IH tractors models JX1075N through JX1095N. It contains safety and technical information for working on and repairing components of the tractors. The manual is divided into multiple sections that cover general information, the engine, transmission, brakes, hydraulics, electrical systems, and other components. Safety precautions are provided throughout for working with hazardous materials and operating machinery.
CASE IH JX1075N Tractor Service Repair Manual.pdffujsekkmdmd
This document is a repair manual for Case IH tractors models JX1075N through JX1095N. It contains safety and technical information for working on and repairing components of the tractors. The manual is divided into multiple sections that cover general information, the engine, transmission, brakes, hydraulics, electrical systems, and other components. Safety precautions are provided throughout for working with hazardous materials and operating machinery.
Case ih jx95 tractor service repair manualjjskefkskemik
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections on the engine, clutch, transmissions, brakes, hydraulics and other systems. The manual provides instructions and safety information for technicians performing repairs and maintenance on these tractors.
Case ih jx60 tractor service repair manualfjsjekksemm
The document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections on the engine, clutch, transmissions, brakes, hydraulics and other systems. The manual provides instructions and safety information for technicians performing maintenance and repairs.
Case ih jx90 tractor service repair manualjjskefkskemik
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections on the engine, clutch, transmissions, brakes, hydraulics and other systems. The manual provides instructions and safety information for technicians performing repairs and maintenance on these tractors.
Case ih jx1095 n tractor service repair manualfujsjekfkkseme
This document is a repair manual for Case IH JX1075N-JX1095N tractors. It contains sections covering the engine, transmission, brakes, hydraulics, steering, climate control, electrical systems, and bodywork. Each section includes chapters that provide instructions and specifications for repairing and maintaining components in that system. Safety precautions are outlined to ensure repairs are performed correctly.
Case ih jx1070 c tractor service repair manualfjjjskekksmem
This document contains a repair manual for CNH America LLC tractor models JX1060C, JX1070C, JX1075C, JX1085C, and JX1095C. The manual includes sections covering the engine, clutch, transmissions, transfer box, front and rear axles, braking system, hydraulic system, steering, wheels, air conditioning, electrical system, and other components. Safety precautions and instructions are provided at the beginning for technicians to follow when performing maintenance and repairs.
Case ih jx1060 c tractor service repair manualfjjjskekksmem
This document provides guidance on health and safety precautions for working with various chemicals and materials. It lists hazards associated with acids, alkalis, solvents, fire, dust, electric shock, exhaust fumes, and other substances. Do's and don'ts are outlined, and first aid information is included to ensure safety when handling these materials.
Case ih jx1060 c tractor service repair manualfdjjjsekkskemm
This document provides health and safety precautions and guidelines for working with various chemicals and materials that may be encountered when servicing agricultural equipment. It lists hazards from acids, alkalis, solvents, fuels, dusts, fumes, and other substances. Precautions are given for safe handling, storage, first aid, and avoiding risks of fire, electric shock, inhalation, and contact with skin or eyes. Proper protective equipment and ventilation are advised.
Case ih jx1075 c tractor service repair manualfjjjskekksmem
This document is a repair manual for CNH America LLC tractor models JX1060C, JX1070C, JX1075C, JX1085C, and JX1095C. It contains sections on general information, the engine, clutch, transmissions, transfer boxes, axles, braking systems, hydraulics, steering, wheels, air conditioning, electrical systems, and other components. The manual provides instructions and safety information for technicians repairing and maintaining components of the listed tractor models.
Case ih jx1070 c tractor service repair manualfdjjjsekkskemm
This document provides guidance on health and safety precautions for working with various chemicals and materials. It lists hazards associated with acids, alkalis, solvents, fire, dust, electric shock, exhaust fumes, and other substances. Do's and don'ts are outlined, and first aid information is included to ensure safety when handling these materials.
CASE IH JX80 Tractor Service Repair Manual.pdffujsekdmmdm
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections covering the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. The document provides an overview of the manual's contents and structure for technicians to reference when repairing systems on the listed tractor models.
CASE IH JX95 Tractor Service Repair Manual.pdffujsekdmmdm
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections covering the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. The document provides an overview of the manual's contents and structure for technicians to reference when repairing systems on the listed tractor models.
CASE IH JX60 Tractor Service Repair Manual.pdffujsekdmmdm
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections covering the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. The document provides an overview of the manual's contents and structure for technicians to reference when repairing systems on the listed tractor models.
CASE IH JX90 Tractor Service Repair Manual.pdffujsekdmmdm
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections covering the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. The document provides an overview of the manual's contents and structure for technicians to reference when repairing systems on the listed tractor models.
CASE IH JX70 Tractor Service Repair Manual.pdffujsekdmmdm
This document is a repair manual for Case IH JX60, JX70, JX80, JX90, and JX95 tractors. It contains sections covering the engine, clutch, transmissions, brakes, hydraulics, steering, axles, electrical systems, and other components. The document provides an overview of the manual's contents and structure for technicians to reference when repairing systems on the listed tractor models.
Case ih jx1070 c tractor service repair manualfjjskekskem
This document contains sections from a repair manual for CNH America LLC tractor models JX1060C, JX1070C, JX1075C, JX1085C, and JX1095C. It lists the table of contents for each section of the repair manual, including the engine, clutch, transmissions, front and rear axles, braking system, hydraulic system, steering, and electrical system. The document provides an overview of the complete contents and organization of the repair manual for servicing and repairing the listed tractor models.
The document is a repair manual that provides safety instructions and guidelines for working with hazardous materials that may be encountered during maintenance and repair of agricultural equipment. It addresses proper handling of acids, alkalis, solvents, welding materials, dusts, and other potential hazards. Precautions are outlined for different situations to avoid injury and comply with legal requirements for working with chemicals.
Case ih jx1075 c tractor service repair manualfjjskekskem
This document contains sections from a repair manual for CNH America LLC tractor models JX1060C, JX1070C, JX1075C, JX1085C, and JX1095C. It lists the table of contents for each section of the repair manual, including the engine, clutch, transmissions, front and rear axles, braking system, hydraulic system, steering, and electrical system. The document provides an overview of the complete contents and organization of the repair manual for servicing and repairing these tractor models.
This document contains sections from a repair manual for CNH America LLC tractor models JX1060C, JX1070C, JX1075C, JX1085C, and JX1095C. It lists the table of contents for each section of the repair manual, including the engine, clutch, transmissions, front and rear axles, braking system, hydraulic system, steering, and electrical system. The document provides an overview of the complete contents and organization of the repair manual for servicing and repairing these tractor models.
Similar to Case ih jx1075 n tractor service repair manual (20)
Hyster n006 (h7.0 ft) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models ranging from 7,007 to 8,775 kg
- Tire sizes, fuel capacities, fluid capacities, and specifications for engines, transmissions, hydraulics, and other components
- Procedures for removing a drive axle which include draining fluids, removing mounting hardware, and disassembling related systems
Hyster l006 (h6.0 ft europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle from the lift trucks
Hyster k019 (h10 xm 12 europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Cummins diesel engines and Konecranes lift trucks. It includes counterweight weights, basic truck weights, engine specifications like oil capacities and pressures, transmission specifications, hydraulic system specifications like pump capacities and relief pressures, and tire sizes. Torque specifications are also provided for components like transmissions, differentials, brakes, steering systems and wheels.
Hyster k019 (h13 xm 6 europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Cummins diesel engines and Konecranes lift trucks. It includes counterweight weights, basic truck weights, engine specifications like oil capacities and pressures, transmission specifications, hydraulic system specifications like pump capacities and relief pressures, and specifications for items like tires, brakes, steering and wheels. Torque specifications are also provided for components like transmissions, differentials, counterweights and more.
Hyster k019 (h14 xm 6 europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Cummins diesel engines and Kion lift trucks. It includes counterweight weights, basic truck weights, engine specifications like oil capacities and pressures, mast speeds, hydraulic system specifications, transmission specifications, and torque specifications for servicing components. The document contains model-specific data for H8-H16XM and H6-H7XM-12EC lift trucks.
Hyster k019 (h16 xm 6 europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Cummins diesel engines and Konecranes lift trucks. It includes counterweight weights, basic truck weights, engine specifications like oil capacities and pressures, transmission specifications, hydraulic system specifications like pump capacities and relief pressures, and tire sizes. Torque specifications are also provided for components like transmissions, differentials, brakes, steering systems and wheels.
Hyster l006 (h7.0 ft europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle, including draining fluids and removing mounting hardware
Hyster n006 (h6.0 ft) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes, fuel capacities, fluid capacities, and recommended fluids
- Electrical system specifications including battery, alternator, and spark plug details
- Transmission oil pressures and hydraulic system relief pressures
- Instructions for removing the drive axle, including draining fluids and disconnecting brake lines
The document contains detailed technical information for servicing various components of Hyster lift trucks.
Hyster n006 (h7.0 fts6) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models ranging from 7,007 to 8,775 kg
- Tire sizes, fuel capacities, fluid capacities, and specifications for engines, transmissions, hydraulics, and other components
- Procedures for removing a drive axle which include draining fluids, removing mounting hardware, and disassembling related systems
Hyster n006 (h8.0 fts6) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models ranging from 7,007 to 8,775 kg
- Tire sizes, fuel capacities, fluid capacities, and specifications for engines, transmissions, hydraulics, and other components
- Procedures for removing a drive axle which include draining fluids, removing mounting hardware, and disassembling related systems
Hyster p177 (h3.0 ft europe) forklift service repair manualfujsefkskemm
This document provides specifications and repair information for Hyster lift trucks. It includes lifting capacities, counterweight weights, tire sizes, fuel and fluid capacities, and electrical specifications for various Hyster truck models. It also provides transmission oil pressure specifications and general transmission repair procedures.
Hyster p177 (h3.5 ft europe) forklift service repair manualfujsefkskemm
This document provides specifications and repair information for Hyster lift trucks. It includes the lifting capacity, counterweight, tire size, fuel and fluid capacities, and electrical specifications for various Hyster truck models. The document also provides transmission oil pressure specifications and general transmission repair procedures.
Hyster p177 (h2.5 ft europe) forklift service repair manualfujsefkskemm
This document provides specifications and repair information for Hyster lift trucks. It includes the lifting capacity, counterweight, tire size, fuel and fluid capacities, and electrical specifications for various Hyster truck models. The document also provides transmission oil pressure specifications and general transmission repair procedures.
Hyster k019 (h7 xm 12ec europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Cummins diesel engines and Kion lift trucks. It includes counterweight weights, basic truck weights, engine specifications like oil capacities and pressures, mast speeds, hydraulic system specifications, transmission specifications, and torque specifications for servicing components. The document contains model-specific data for H8-H16XM and H6-H7XM-12EC lift trucks.
Hyster k019 (h6 xm 12ec europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Cummins diesel engines and Konecranes lift trucks. It includes counterweight weights, basic truck weights, engine specifications like oil capacities and pressures, transmission specifications, hydraulic system specifications like pump capacities and relief pressures, and torque specifications for components. Mast speeds and tire sizes are also provided for different lift truck models.
Hyster k007 (h12 xm 6 europe) forklift service repair manualfujsefkskemm
This document provides specifications for Caterpillar lift trucks including:
- Counterweight weights ranging from 2900 kg to 7050 kg for various models.
- Basic truck weights ranging from 9,400 kg to 15,400 kg depending on options and model.
- Engine specifications for Cummins QSB4.5 and QSB6.7 engines including bore, stroke, oil pressure, governed speed, and more.
- Capacities for engine oil, cooling system, hydraulic tank, transmission, fuel tank, and more.
Hyster k007 (h10 xms 6 europe) forklift service repair manualfujsefkskemm
This document provides specifications for Caterpillar lift trucks including:
1) Counterweight weights ranging from 2900 kg to 7050 kg depending on the lift truck model.
2) Basic truck weights ranging from 9400 kg to 15,400 kg depending on options and tire type.
3) Engine specifications including displacement, compression ratio, oil pressure, and weight for Cummins QSB4.5 and QSB6.7 engines.
4) Capacities for engine oil, cooling system, hydraulic tank, transmission, drive axle, and fuel tank.
Hyster k007 (h10 xm 6 europe) forklift service repair manualfujsefkskemm
This document provides specifications for Caterpillar lift trucks including:
1) Counterweight weights ranging from 2900 kg to 7050 kg depending on the lift truck model.
2) Basic truck weights ranging from 9400 kg to 15,400 kg depending on options and tire type.
3) Engine specifications including displacement, compression ratio, oil pressure, and weight for Cummins QSB4.5 and QSB6.7 engines.
4) Capacities for engine oil, cooling system, hydraulic tank, transmission, drive axle, and fuel tank.
Hyster k007 (h9 xm 6 europe) forklift service repair manualfujsefkskemm
This document provides specifications for Caterpillar lift trucks including:
- Counterweight weights ranging from 2900 kg to 7050 kg for various models.
- Basic truck weights ranging from 9,400 kg to 15,400 kg depending on options and model.
- Engine specifications for Cummins QSB4.5 and QSB6.7 engines including bore, stroke, oil pressure, governed speed, and more.
- Capacities for engine oil, cooling system, hydraulic tank, transmission, fuel tank, and more.
Hyster k007 (h8 xm 6 europe) forklift service repair manualfujsefkskemm
This document provides specifications for Caterpillar lift trucks including:
1) Counterweight weights ranging from 2900 kg to 7050 kg depending on the lift truck model.
2) Basic truck weights ranging from 9400 kg to 15,400 kg depending on options and tire type.
3) Engine specifications including displacement, compression ratio, oil pressure, and weight for Cummins QSB4.5 and QSB6.7 engines.
4) Capacities for engine oil, cooling system, hydraulic tank, transmission, drive axle, and fuel tank.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
3. SECTION 00 -- GENERAL -- CHAPTER 12
WARNING
All maintenance and repair work described in
this manual must be performed exclusively by
CASE IH service technicians in strict accordance
with the instructions given and using any
specific tools necessary.
WARNING
Anyone who performs the operations described
herein without strictly following the instructions
is personally responsible for resulting injury or
damage to property.
WARNING
The Manufacturer and all organizations belong-
ing to the Manufacturer’s distribution network,
including but not restricted to national, regional
or local distributors, will accept no responsibility
for personal injury or damage to property caused
by abnormal function of parts and/or compo-
nents not approved by the Manufacturer,
including those used for maintenance and/or
repair of the product manufactured or marketed
by the Manufacturer. In any case, the product
manufactured or marketed by the Manufacturer
is covered by no guarantee of any kind against
personal injury or damage to property caused by
abnormal function of parts and/or components
not approved by the Manufacturer.
4. SECTION 00 -- GENERAL -- CHAPTER 1 3
GENERAL INSTRUCTIONS
IMPORTANT NOTICE
All maintenance and repair operations described in
this manual should be carried out exclusively by the
authorised workshops. All instructions detailed
should be carefully observed and special equipment
indicated should be used if necessary.
Everyone who carries out service operations
described without carefully observing these prescrip-
tions will be directly responsible of deriving
damages.
SHIMMING
At each adjustment, select adjusting shims, measure
them individually using a micrometer and then sum
up recorded values. Do not rely on measuring the
whole shimming set, which may be incorrect, or on
the rated value indicated for each shim.
ROTATING SHAFT SEALS
To correctly install rotating shaft seals, observe the
following instructions:
• Let the seal soak into the same oil as it will seal
for at least half an hour before mounting;
• Thoroughly clean the shaft and ensure that the
shaft working surface is not damaged;
• Place the sealing lip towards the fluid. In case of
a hydrodynamic lip, consider the shaft rotation
direction and orient grooves in order that they
deviate the fluid towards the inner side of the
seal;
• Coat the sealing lip with a thin layer of lubricant
(oil rather than grease) and fill the gap between
the sealing lip and the dust lip of double lip seals
with grease;
• Insert the seal into its seat and press it down
using a flat punch. Do not tap the seal with a
hammer or a drift;
• Take care to insert the seal perpendicularly to its
seat while you are pressing it. Once the seal is
settled, ensure that it contacts the thrust element,
if required;
• To prevent damaging the sealing lip against the
shaft, place a suitable protection during
installation.
O RINGS
Lubricate the O rings before inserting them into their
seats. This will prevent the O rings from roll over and
twisting during mounting, which will jeopardize
sealing.
SEALERS
Apply silicone/gasket eliminator over the mating
surfaces marked with an X.
Before applying the sealer, prepare the surface as
follows:
• remove possible scales using a metal brush;
• thoroughly degrease the surfaces using one of
the following cleaning agents: trichlorethylene,
diesel fuel or a water and soda solution.
BEARINGS
It is advisable to heat the bearings to 80° to 90°C
(176° to 194°F) before mounting them on their shafts
and cool them down before inserting them into their
seats with external tapping.
SPRING PINS
When mounting split socket spring pins, ensure that
the pin notch is oriented in the direction of the effort
to stress the pin.
Spiral spring pins should not be oriented during
installation.
5. SECTION 00 -- GENERAL -- CHAPTER 14
GENERAL INSTRUCTIONS
PRECAUTIONARY NOTICE
Only authorized workshops should carry out maintenance and repair operations on the tractor, or tractor compo-
nents. Carefully observe all instructions, safety precautions, and the use of equipment such as special tools, as
detailed in this manual. Damage to the tractor, or injury to personnel is the direct responsibility of anyone who
fails to observe these precautions.
EQUIPMENT NOTICE
The equipment proposed in this manual is:
• Designed and studied expressly for use on Case IH tractors
• Necessary for adequate and reliable repair of the tractor
• Strictly tested for the efficient and long lasting life cycle of the tractor
SPARE PARTS NOTICE
Genuine CASE IH spare parts guarantee the same quality, safety and life cycle as original components. These
parts bear the logo.
GENERAL NOTICES
In this manual, the description ’FRONT’, ’REAR’, ’RIGHT--HAND’ and ’LEFT--HAND’ refer to the view seen by
the operator while in the operator’s seat, looking in the direction in which the tractor normally moves.
Wear limits detailed in this manual, although advised, are not binding.
7. SECTION 00 -- GENERAL -- CHAPTER 16
ACIDS AND ALKALIS -- see Battery acids, e.g.
caustic soda, sulfuric acid.
Used in batteries and cleaning materials.
Irritant and corrosive to the skin, eyes, nose and
throat. Causes burns.
Avoid splashes to the skin, eyes and clothing. Wear
suitable protective gloves and goggles. Can destroy
ordinary protective clothing. Do not breathe mists.
Ensure access to water and soap is readily available
for splashing accidents.
ADHESIVES AND SEALERS -- see Fire
Highly Flammable, Flammable, combustible.
Generally should be stored in “No Smoking” areas;
cleanliness and tidiness in use should be observed,
e.g. disposable paper covering benches; should be
dispensed from applicators where possible; contain-
ers, including secondary containers, should be
labelled.
Solvent based Adhesives/Sealers -- See Solvents.
Follow manufacturers instructions.
Water based Adhesives/Sealers
Those based on polymer emulsions and rubber
lattices may contain small amounts of volatile toxic
and harmful chemicals. Skin and eye contact should
be avoided and adequate ventilation provided during
use.
Follow manufacturers instructions.
Resin based Adhesives/Sealers -- e.g. epoxide
and formaldehyde resin based.
Mixing should only be carried out in well ventilated
areas as harmful or toxic volatile chemicals may be
released.
Skin contact with uncured resins and hardeners can
result in irritation; dermatitis and absorption of toxic
or harmful chemicals through the skin. Splashes can
damage the eyes.
Provide adequate ventilation and avoid skin and eye
contact. Follow manufacturers instructions.
Anaerobic, Cyanoacrylate and other Acrylic
Adhesives
Many are irritant, sensitizing or harmful to the skin.
Some are eye irritants.
Skin and eye contact should be avoided and the
manufacturers instructions followed.
Cyanoacrylate adhesives (super--glues) must not
contact the skin or eyes. If skin or eye tissue is
bonded cover with a clean moist pad and get medical
attention. do not attempt to pull tissue apart. Use in
well ventilated areas as vapours can cause irritation
of the nose and eyes.
For two--pack systems see Resin based adhesives/
sealers.
Isocyanate (Polyurethane) Adhesives/
Sealers -- see Resin based Adhesives.
Individuals suffering from asthma or respiratory
allergies should not work with or near these materials
as sensitivity reactions can occur.
Any spraying should preferably be carried out in
exhaust ventilated booths removing vapours and
spray droplets from the breathing zone. Individuals
working with spray applications should wear
supplied air respirators.
ANTIFREEZE -- see Fire, Solvents e.g.
Isopropanol, Ethylene Glycol, Methanol.
Highly Flammable, Flammable, Combustible.
Used in vehicle coolant systems, brake air pressure
systems, screenwash solutions.
Vapours given off from coolant antifreeze (glycol)
arise only when heated.
Antifreeze may be absorbed through the skin in toxic
or harmful quantities. Antifreeze if swallowed is fatal
and medical attention must be found immediately.
8. SECTION 00 -- GENERAL -- CHAPTER 1 7
ARC WELDING -- see Welding.
BATTERY ACIDS -- see Acids and Alkalis.
Gases released during charging are explosive.
Never use naked flames or allow sparks near
charging or recently charged batteries.
BRAKE AND CLUTCH FLUIDS
(Polyalkylene Glycols) -- see Fire.
Combustible.
Splashes to the skin and eyes are slightly irritating.
Avoid skin and eye contact as far as possible.
Inhalation of vapour hazards do not arise at ambient
temperatures because of the very low vapour
pressure.
BRAZING -- see Welding.
CHEMICAL MATERIALS -- GENERAL -- see
Legal Aspects.
Chemical materials such as solvents, sealers,
adhesives, paints, resin foams, battery acids,
antifreeze, brake fluids, oils and grease should
always be used with caution and stored and handled
with care. They may be toxic, harmful, corrosive,
irritant or highly inflammable and give rise to
hazardous fumes and dusts.
The effects of excessive exposure to chemicals may
be immediate or delayed; briefly experienced or
permanent; cumulative; superficial; life threatening;
or may reduce life--expectancy.
DO’S
Do remove chemical materials from the skin and
clothing as soon as practicable after soiling. Change
heavily soiled clothing and have it cleaned.
Do carefully read and observe hazard and
precaution warnings given on material containers
(labels) and in any accompanying leaflets, poster or
other instructions. Material health and safety data
sheets can be obtained from Manufacturers.
Do organise work practices and protective clothing to
avoid soiling of the skin and eyes; breathing
vapours/aerosols/dusts/fumes; inadequate contain-
er labelling; fire and explosion hazards.
Do wash before job breaks; before eating, smoking,
drinking or using toilet facilities when handling
chemical materials.
Do keep work areas clean, uncluttered and free of
spills.
Do store according to national and local regulations.
Do keep chemical materials out of reach of children.
14. 20 SECTION 10 -- ENGINE -- CHAPTER 1
OVERHAUL
ENGINE
Op. 10 001 10
Removal
DANGER
Lift and handle all heavy parts using suitable
lifting equipment.
Make sure that assemblies or parts are
supported by means of suitable slings and
hooks. Check that no one is in the vicinity of the
load to be lifted.
WARNING
Always use appropriate tools to align fixing
holes. NEVER USE FINGERS OR HANDS.
Proceed as follows.
1. Carry out operation 90 150 10 Cab with platform
unit removal (see Sect. 90) (models with cab).
Ensure that the bracket 380001613 locking the front
axle in relation to the engine is positioned and
secured between the above.
2. Carry out operation 90 110 36 Platform assembly
removal (see Sect. 90) (models with platform).
3. Carry out operation 90 114 20 Front roll bar, re-
moval (see Sect. 90) (models with platform).
4. Unscrew the plug and drain the oil from the rear
transmission casing (the prescribed quantity is
11.09 US gal. (42 liters). 25628
4
5. Disconnect the electrical connections (2) and re-
move the front guard (1) by sliding forwards.
5
15. SECTION 10 -- ENGINE -- CHAPTER 1 21
6. If the tractor is not fitted with an extra fuel tank,
disconnect the piping (1) and drain the fuel from
the main tank.
7. If the tractor is fitted with a platform the coolant
must be drained.
6
8. Disconnect the fuel return piping (1).
7
9. Remove the clamp (1) and detach the radiator
sleeve (2), unscrew the radiator retaining bracket
(3).
8
10. Disconnect the connecting pipe (1) between the
main fuel tank and the extra fuel tank.
9
16. 22 SECTION 10 -- ENGINE -- CHAPTER 1
11. Unscrew the brake control piping (1) on the front
axle (if fitted).
10
12. Disconnect the hydrostatic steering piping (1).
11
13. Disconnect the steering sensor wire, loosen the
hose and wire retaining clamps (1) on the radia-
tor.
12
14. Loosen the clamp and disconnect the fuel injec-
tion pump hose (1).
13
17. SECTION 10 -- ENGINE -- CHAPTER 1 23
15. Unscrew the clamp (3) to release the sleeve (2)
from the turbocharger (if fitted).
16. Disconnect the electrical connections (1) on the
clogged air filter sensor.
14
17. Unscrew the clamp and remove the sleeve (1) on
the relative rigid pipe (2).
15
18. Loosen the hydraulic pump line piping bolts (1).
16
19. Loosen the clamps (1, 3 and 4), unscrew the
bracket retaining bolts (2) and remove the hy-
draulic pump line piping (5).
17
18. 24 SECTION 10 -- ENGINE -- CHAPTER 1
20. Unscrew the filter piping (1 and 2).
21. Unscrew the services distributor piping (3, 4 and
5).
18
22. Disconnect and remove piping (1, 2, 3, 4, 5 and
6).
23. Carry out operation 10 254 44 Exhaust pipe re-
moval (see Sect. 10).
19
24. Disconnect the piping (2), unscrew the clamp (1),
the piping/clutch housing retaining bolt, and re-
move piping (1 and 3).
20
25. Remove the guard (2) and disconnect the starter
motor wires (1), disconnect the pipe (4).
26. Remove the retaining clamp and disconnect the
engine electrical wires, place the wires (2 and 3)
on the clutch casing.
21
19. SECTION 10 -- ENGINE -- CHAPTER 1 25
27. Disconnect the brake piping (1) from the block.
28. Carry out operation 23 101 26 Drive shafts and
guard, removal (see Sect. 23).
22
29. Position an hydraulic jack under the rear axle, at-
tach the motor to a hoist, using a chain, and place
a stand under the clutch casing.
30. Unscrew the front axle -- engine retaining bolts
(1).
23
31. Remove the front axle, complete with support,
tanks, radiator and air filter.
24
32. Unscrew the bolt (2) accessing the Allen screw
(1) (on both sides).
33. Unscrew all of the clutch casing -- engine bolts
and detach the engine.
25
20. 26 SECTION 10 -- ENGINE -- CHAPTER 1
Installation
WARNING
Always use appropriate tools to align fixing
holes. NEVER USE FINGERS OR HANDS.
Apply the prescribed tightening torques. See table of
contents.
1. Before refitting the engine to the clutch box
carefully clean the mating surfaces and apply
sealing compound (0.0787 in. (2 mm) diameter),
according to the diagram shown Section 21.
2. Install the engine on the clutch casing.
3. Install the front axle support assembly on the
engine.
4. Carry out operation 23 101 26 Drive shafts and
guard, installation (see Sect. 23).
5. Connect the brake piping.
6. Connect the wires to the starter motor and
position the other wires on the engine.
7. Assemble all hydraulic pipes and hoses.
8. Carry out operation 10 254 44 Exhaust pipe
installation (see Sect. 10).
9. Assemble the hydraulic pump feed piping,
complete with the relative support bracket.
10. Connect the lower radiator sleeve to the rigid pipe.
11. Place the inlet sleeve on the turbocharger and
secure in position (if fitted).
12. Connect the electrical connections to the
clogged air filter sensor.
13. Connect the injection pump fuel supply piping.
14. Connect the steering sensor wire.
15. Install the hydrostatic steering piping to the
radiator.
16. Connect the hydrostatic steering piping.
17. Connect the brake piping on the front axle.
18. Connect and secure the main fuel tank/extra fuel
tank piping.
19. Connect the upper radiator sleeve.
20. Attach the radiator bracket.
21. Connect the fuel return piping to the fuel tank.
22. Position the front guard and connect the
headlamps and direction indicator electrical
connections.
23. Screw the plug on the rear transmission casing
and fill up with oil (see Sect. 00 for prescribed
products and quantities).
24. Carry out operation 90 114 20 Removable front
roll bar re-assembly (see sect. 90) (models with
platform).
26
25. Carry out operation 90 110 36 Platform assembly
installation (see Sect. 90) (models with platform).
26. Carry out operation 90 150 10 Cab with platform
unit installation (see Sect. 90) (models with cab).
27. Fill up the engine cooling system (see Sect. 00
for prescribed products and quantities).
28. Fill up the fuel tank (see Sect. 00 for prescribed
products and quantities).
29. Bleed the brakes (see Sect. 33).
21. SECTION 10 -- ENGINE -- CHAPTER 1 27
Op. 10 001 30
Compression Test
In case of poor engine performance, in addition to
checking the fuel injection system (injection nozzles
and injection pump), also test the compression on
each cylinder.
DANGER
Do not use matches, lighters, blowtorches or any
form of naked flame as a source of light when
inspecting the engine due to the presence of
flammable fluids and vapor.
Compression ratio
The compression ratio is a measure of the quantity
of air drawn into the cylinder, and provides an
indication of the efficiency of the sealing elements in
the cylinder (piston rings and valves).
Uniform compression in all the cylinders ensures that
they all perform an equal amount of work, provided
that each cylinder is injected with the same quantity
of fuel at the right time.
Low compression not only reduces engine perfor-
mance, it also causes incomplete fuel combustion
due to the lack of available combustion air.
The engine therefore gives poor performance with
excessive fuel consumption and, consequently,
exhaust smoke and restriction of the exhaust
passages.
As the compression ratio also varies with the
temperature of the engine (cold engines produce
lower compression values than hot engines), the
compression should only be tested when the engine
is at normal operating temperature.
Compression should be tested using the compres-
sion test kit 380000303, as follows:
1) run the engine until it reaches normal operating
temperature;
2) switch off the engine;
3) disconnect the lead from the engine stop
electromagnet on the injection pump in order to close
the valve and block the flow of fuel to the injectors;
4) remove the injector from the cylinder to be tested;
5) turn the engine over a few times with the starter
motor in order to expel any carbon residue;
6) install the dummy injector 380000617 in place of
the injector removed previously, inserting the copper
sealing washer;
7) connect the compression test instrument
380000303 and take readings while turning the
engine over with the starter motor.
On engines in perfect working order, with the sump
oil at approx. 104 °F (40 °C) at sea level (29.9212 in.
(760 mm) mercury) and at an engine speed of 200 to
280 rpm, the compression should be 369.75 to
398.75 psi (25.5 to 27.5 bar).
8) Test the compression on the other cylinders,
repeating steps 4--5--6--7, bearing in mind that:
The minimum permissible compression on a used
engine is 313.2 psi (21.6 bar).
The maximum permissible compression difference
between cylinders is 43.5 psi (3 bar).
Every 328 ft. (100 meters) above sea level
corresponds to a reduction in compression by
approx. 1%.
CONSIDERATIONS:
Uniform compression
Although high compression is important, it is more
important for smooth engine running that compres-
sion is uniform in all cylinders.
Low compression readings.
If extremely low pressure readings are obtained on
one cylinder it is advisable to repeat the test.
Before testing this time, pour about a spoonful of
engine oil into the cylinder through the injector bore.
Turn over the engine a few times to distribute the oil
evenly over the cylinder walls, and then repeat the
test.
If the second test readings are significantly higher,
suspect worn piston rings, out-of-round or damaged
pistons or cylinders.
If the second test readings are not higher, the
problem will be the valves.
On the other hand, if the second test reading shows
only a slight improvement, the problem will be due to
both the valves and the rings.
22. 28 SECTION 10 -- ENGINE -- CHAPTER 1
Op. 10 001 54
Disassembly
WARNING
Handle all parts carefully. Do not put your hands
or fingers between parts. Wear the prescribed
safety clothing, including goggles, gloves and
safety footwear.
Proceed as follows.
1. Carry out operation 10 001 10 Engine, removal.
2. Remove the alternator and air conditioning com-
pressor belts (1).
27
3. Unscrew the retaining bolts and remove the ex-
haust muffler (1).
28
4. Unscrew the retaining bolt (2) and move the alter-
nator (1) outwards.
29
5. Loosen the clamp and remove the turbocharger
sleeve (1) (if fitted).
30
23. SECTION 10 -- ENGINE -- CHAPTER 1 29
6. Disconnect the turbocharger lubrication piping
(1) (if fitted).
7. Unscrew the retaining bolts and remove the ex-
haust manifold (2) complete with the turbochar-
ger (1) (if fitted).
31
8. Unscrew the retaining bolt and remove the alter-
nator.
9. Disconnect and remove the turbocharger (2) lu-
brication piping (if fitted).
32
10. Unscrew the retaining bolts and remove the lift
pump (1).
11. Unscrew: the hydraulic oil filter (2), the relative
retaining bolts and remove the filter support (3).
33
12. Unscrew the retaining bolts and remove the ser-
vices pump (1).
34
24. 30 SECTION 10 -- ENGINE -- CHAPTER 1
13. Unscrew the oil filter (3).
14. Loosen the clamps (2) and remove the heat ex-
changer (4) piping (1), unscrew the retaining
bolts and remove the heat exchanger.
35
15. Unscrew the union (1) and remove the piping (2).
16. Unscrew the retaining bolts and remove the pip-
ing (3).
36
17. Loosen the clamp (2) and remove the oil vapor
recovery device (1).
37
18. Unscrew the retaining bolts and remove the
brake fluid reservoir (2).
19. Disconnect the injector delivery piping (1), both
from the pump and the injectors, and remove.
20. Disconnect the fuel return piping (4) from the in-
jection pump.
21. Disconnect the thermostarter supply piping (3).
38
25. SECTION 10 -- ENGINE -- CHAPTER 1 31
22. Disconnect the piping on: the fuel supply pump
(3), injection pump (2) and the connecting piping
(1) between the LDA device to the inlet manifold.
23. Remove the piping (5).
24. Unscrew the retaining bolts and remove the fuel
supply pump (4) and support.
25. Unscrew the fuel filter (6).
26. Make reference marks on the injection pump and
relative support.
39
27. Remove the injection pump (1). (Refer to Chap-
ter 4).
1
40
28. Unscrew the retaining bolts and remove the inlet
manifold (1).
41
26. 32 SECTION 10 -- ENGINE -- CHAPTER 1
29. Unscrew the retaining bolts and remove the start-
er motor (1).
42
30. Unscrew the retaining bolts and remove the fan
(1) and relative drive pulley (2).
43
31. Unscrew the retaining bolts and remove the cool-
ant pump (1).
44
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. SECTION 10 -- ENGINE -- CHAPTER 1 33
32. Unscrew the retaining bolts and remove the cool-
ant pump support (1).
45
33. Unscrew the retaining bolts and remove the ther-
mostat switch (1) and support.
46
34. Using tool 380001760 (1), unscrew the retaining
bolts and remove the clutch (2).
35. With the aid of the brackets 380000313, secure
the engine to the rotating stand 380000301.
27785
47
29. 34 SECTION 10 -- ENGINE -- CHAPTER 1
36. Remove the injector mounting nuts, the underly-
ing spherical washers, then the supports and the
injectors themselves.
37. Remove the retaining bolts (1), washers and
seal, then remove the rocker housing cover (2)
and seal.
25098
2
1
48
38. Remove the rocker shaft retaining bolts (2), then
remove the entire rocker shaft assembly (1).
25099
1 2
49
39. Remove the valve collets (1) and extract the
pushrods (2).
25100
21
50
30. SECTION 10 -- ENGINE -- CHAPTER 1 35
40. Unscrew the cylinder head bolts (1) and remove
the head using a hoist and lifting hook
380000216.
41. Remove the cylinder head gasket.
25101 1
51
42. (On 4 cylinder models) turn the rotating stand
through 180_, remove the retaining bolts, the
sump cover (1) and seal (2).
25102
1
2
52
43. (On 4 cylinder models) take out the retaining
bolts and remove the engine lubrication oil inlet
pipe (1) together with the suction cup and seal.
44. (On 4 cylinder models) remove the retaining bolts
(2), release the rotating counterweight casing (3)
and remove the sleeve (4) and the casing (3).
25103
1
23
4
53
31. 36 SECTION 10 -- ENGINE -- CHAPTER 1
45. Unscrew the sump pan retaining bolts and re-
move the sump pan using a hoist, lifting hook
380000216 and lifting chain with eyeholes.
46. Remove the half-gaskets (1) and (3) between the
crankcase/sump pan and the gasket (2) between
the timing gear carrier/sump pan.
1
25104
2
3
54
47. Remove the gasket (1) between the flywheel car-
rier and the sump pan.
NOTE: When relocating gaskets apply a high heat
RTV silicone Gasket Maker to the mating surfaces.
(See your local Case IH dealer).
1
25105
55
48. Remove the rotating counterweight oil seal O-
ring (1) installed on the crankcase mating sur-
face.
25106
1
56
32. SECTION 10 -- ENGINE -- CHAPTER 1 37
49. Unscrew the retaining bolts (1) and remove the
complete oil pump (Naturally aspirated engines
only).
25107
1
57
50. Unscrew the retaining bolts (2) and remove the
fan-alternator drive pulley (1).
25108
1
2
58
51. Straighten the lock tab and remove the nut (1),
securing the crankshaft against rotation.
25109
1
59
33. 38 SECTION 10 -- ENGINE -- CHAPTER 1
52. Pull the pulley hub off the crankshaft using tool
380000226 (1) and recover the Woodruff key.
25110
1
60
53. Unscrew the retaining bolts (1) and remove the
timing cover and gasket.
25111
1
61
54. Unscrew the retaining bolts and remove the lift
pump drive gear carrier (1).
25112
1
62