This document is a service manual that provides information on systems for Case IH Axial-Flow combines. It includes sections on the engine, transmission, axles, hydraulic and electrical systems. The manual contains diagrams and instructions for maintenance and repair of components. It is intended to assist technicians in servicing Case IH Axial-Flow 5140, 6140 and 7140 combines that meet specified product identification numbers and model years.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual (pin y...fujsjefjkskeksmem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading components of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual instan...ufjjskekmdmm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih puma 150 cvt tier 4 b (final) tractor service repair manualufjsjekskem
This document is a service manual for Case IH PUMA tractors that provides technical specifications and repair instructions. It contains sections on the engine, transmission, axles, hydraulics, electrical systems, and other components. Each section includes numbered subsections that describe the various parts and systems in detail. The manual also lists the engine models for each tractor model and provides an index of contents to navigate to specific repair information.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual instan...ufjjskekmdmm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fusjefjksefm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fujsjfjskekemmem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual (pin y...fjkseksmefmm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fjskekertkskemm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual (pin y...fujsjefjkskeksmem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading components of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual instan...ufjjskekmdmm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih puma 150 cvt tier 4 b (final) tractor service repair manualufjsjekskem
This document is a service manual for Case IH PUMA tractors that provides technical specifications and repair instructions. It contains sections on the engine, transmission, axles, hydraulics, electrical systems, and other components. Each section includes numbered subsections that describe the various parts and systems in detail. The manual also lists the engine models for each tractor model and provides an index of contents to navigate to specific repair information.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual instan...ufjjskekmdmm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fusjefjksefm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fujsjfjskekemmem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual (pin y...fjkseksmefmm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual (pin y...fjskekertkskemm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual instan...ufjjskekemem
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual (pin y...fjjsfkskemem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding working on the machines, personal protective equipment, and proper handling of fluids, batteries, and emissions equipment.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual (pin y...fisekksemm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding working on the machines, personal protective equipment, and proper handling of fluids, batteries and emissions equipment.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual (pin y...fujskekskemm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual instan...ufjjskekmdmm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual (pin y...fjsekksemfmm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding working on the machines, personal protective equipment, and proper handling of fluids, batteries, and emissions equipment.
New holland 9684 tractor service repair manualfjkskefkmem
This document provides instructions for removing, inspecting, and installing components of the air induction system on 84 Series tractors, including the air induction tube, rubber boot, and precleaner. The removal process involves removing shields, the hood, and clamps before separating parts. Inspection checks for cracks, wear, and debris. Installation follows the reverse of removal procedures and ensures a proper seal with tightened clamps.
Massey ferguson 5435 tractor ( - t163022 --- t186043) service parts catalogu...fjkskefkmem
This document provides a list of parts and their descriptions for Massey Ferguson 5425/5435 tractors. It includes 54 items ranging from engines and their components to cylinder blocks, crankshafts, pistons, and connecting rods. Each item is accompanied by a part number, quantity, description, and any relevant comments. The purpose is to provide the parts and specifications for servicing and repairing these tractor models.
Massey ferguson 5425 tractor (tier 3) service parts catalogue manual (part nu...fjkskefkmem
This document provides a list of parts and their descriptions for a Massey Ferguson 5425 Tier 3 tractor engine. It includes 45 line items with part numbers, quantities, descriptions, and additional comments. The parts listed are for the engine, fan drive section, cylinder block, crankshaft, pistons, and other components.
Massey ferguson 5425 tractor ( - t163022 --- t186043) service parts catalogu...fjkskefkmem
This document provides a list of parts and their descriptions for Massey Ferguson 5425/5435 tractors. It includes 54 items ranging from engines and their components to cylinder blocks, crankshafts, pistons, and connecting rods. Each item is accompanied by a part number, quantity, description, and any relevant comments. The parts are organized into sections for the engine and its equipment, cylinder block configurations for non-turbocharged and turbocharged models, and crankshaft, piston, and connecting rod components.
Massey ferguson 5410 tractor (tier 3) service parts catalogue manual (part nu...fjkskefkmem
This document provides a list of parts for a Massey Ferguson 5410 tractor engine. It includes 31 items ranging from major components like the cylinder block, crankshaft, and cylinder head, to smaller items like bolts, plugs, and seals. Each item is accompanied by a part number, quantity, brief description, and sometimes additional part number options or notes. The purpose is to identify all relevant parts for servicing and repair of the tractor engine.
Massey ferguson 2705 tractor service parts catalogue manual (part number 651...fjkskefkmem
This document provides a list of parts for a Massey Ferguson 2705 tractor engine. It includes 77 items ranging from complete engine assemblies to individual plugs, bolts, and other small parts. The document provides part numbers from both Massey Ferguson and Perkins, the engine manufacturer. It also includes notes on various part options and which were used in early versus late production engines.
Massey ferguson 2615 tractor service parts catalogue manual (part number 390...fjkskefkmem
The document contains a parts list and technical specifications for the engine, fuel, and exhaust systems of a Massey Ferguson 2615 tractor made in India for the US, Canada, and Turkey. It includes 58 pages listing over 1000 individual part numbers for the various engine and fuel system components, along with item descriptions and part references. The parts are organized by system (e.g. engine, fuel tank, air filter) and include some country-specific variations for components used in Turkey.
Massey ferguson 2435 stge tractor (utility) service parts catalogue manual (p...fjkskefkmem
This document provides part numbers and descriptions for engine components of a Massey Ferguson 2435 ST/GE tractor. It includes sections on the engine assembly, cylinder block, turbocharger, crankshaft and connecting rods, cylinder head, rocker shaft, timing gear and camshaft, and balancer unit. The document lists each component part number, description, and other relevant information to aid in tractor maintenance and repair.
Caterpillar cat 735 b articulated truck (prefix l4d) service repair manual (l...fjkskefkmem
The document provides disassembly instructions for output transfer gears on a 735B articulated truck. It describes 41 steps to fully disassemble the output transfer gears, including removing harnesses, hoses, bolts, washers, tubes, seals, bearings, gears, carriers, sleeves, and more. Various tools are required including pullers, stands, brackets, and forcing screws. Weights and torques are provided for some components. Detailed illustrations accompany each step.
This document provides instructions for removing and installing various components of a Caterpillar C15 engine, including:
- Installing the rear power take-off using various tools and ensuring proper positioning and torque of components.
- Removing and installing the vibration damper and pulley in two different procedures, noting weight and use of lifting devices and guide studs.
- Removing the crankshaft front seal using a slide hammer puller and puncturing holes for removal.
- Preparing the crankshaft and using a seal installer and locator to position the new crankshaft front seal and wear sleeve. Precise cleaning and installation is required without lubrication.
The document provides instructions for removing a gear pump used in the hoist system of a Caterpillar 735 articulated truck. It lists the required tools and outlines 34 steps to disassemble the pump. This includes removing hoses, seals, springs, pistons, plates, and other internal components. Proper cleaning and inspection of parts is emphasized along with using new replacement parts if anything is worn or damaged.
This document provides instructions for removing and installing various components of a Caterpillar C13 engine, including:
- Removing the flywheel housing using link brackets and sealant.
- Removing the vibration damper and pulley using a guide stud.
- Removing the crankshaft front seal by taking off nuts and leaving the shipping sleeve in place for reinstallation.
- Removing the front cover by taking off bolts and studs after removing the accessory drive and vibration damper/pulley.
- Removing the front gear group after removing the front cover by taking off bolts, bearings, shafts and gears.
- Removing the front housing after removing various other components by
Caterpillar cat 322 b ln excavator (prefix 2es) service repair manual (2es000...fjkskefkmem
This document provides instructions for removing and installing a governor and fuel injection control linkage on a Caterpillar 322B L excavator. The removal procedure involves using special tools to disconnect the governor from the engine and remove clips and pins connecting it to other components. The installation procedure specifies applying lubricant to new seals before installing components and using tools to reconnect the governor and install clips and pins. Proper torque specifications are listed for bolts and setscrews.
Caterpillar cat 322 b l excavator (prefix 2es) service repair manual (2es0000...fjkskefkmem
The document provides instructions for removing and installing a governor from a 3116 engine. It begins by listing the required tools. The removal procedure involves disconnecting linkages, removing clips and pins, and using special tools to slide parts out of position. New seals are installed during reassembly. Precise positioning and reconnecting of linkages is required to complete the installation.
Caterpillar cat 268 b skid steer loader (prefix lba) service repair manual (l...fjkskefkmem
The document provides instructions to remove and install the fuel injection pump, turbocharger, exhaust manifold, and inlet manifold on a Caterpillar 3044C engine. To remove the fuel injection pump, the cover and O-ring must be removed, timing marks made, bolts and housing removed, and a puller used to remove the gear. When installing, the components are reinstalled in reverse order while maintaining proper timing. The turbocharger and manifolds are removed by disconnecting connecting tubes and elbows and removing mounting bolts and gaskets. They are installed by reversing the removal steps and torquing bolts to the specified values.
Caterpillar cat 267 b multi terrain loader (prefix cyc) service repair manual...fjkskefkmem
This document provides disassembly instructions for the piston pump of a 267B, 277B, or 287B multi-terrain loader. It lists 43 steps to completely disassemble the pump. The steps include removing housing components, seals, springs, pistons, bearings, and other internal parts. Cleanliness is emphasized throughout to prevent contamination. Safety notices warn of potential injury from released springs or propelled parts.
More Related Content
Similar to Case ih axial flow 5140 tier 4 b (final) combine service repair manual (pin yfg014001 and above)
Case ih axial flow 7150 tier 4 b (final) combine service repair manual instan...ufjjskekemem
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual (pin y...fjjsfkskemem
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding working on the machines, personal protective equipment, and proper handling of fluids, batteries, and emissions equipment.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual (pin y...fisekksemm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding working on the machines, personal protective equipment, and proper handling of fluids, batteries and emissions equipment.
Case ih axial flow 6150 tier 4 b (final) combine service repair manual (pin y...fujskekskemm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding personal safety practices, the environment, and battery recycling.
Case ih axial flow 7150 tier 4 b (final) combine service repair manual instan...ufjjskekmdmm
This document is a service manual that provides technical specifications and repair instructions for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains detailed sections on the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and other components. Repair procedures are organized by system and subsection with part numbers listed. The manual is intended to guide maintenance and repairs of these combines.
Case ih axial flow 5150 tier 4 b (final) combine service repair manual (pin y...fjsekksemfmm
This document provides a service manual for Case IH Axial-Flow combines, including the 5150, 6150, and 7150 models that meet Tier 4B emissions standards. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, as well as the feeding, threshing, separating, residue handling, cleaning, and unloading systems of the combines. Safety information is also provided regarding working on the machines, personal protective equipment, and proper handling of fluids, batteries, and emissions equipment.
Similar to Case ih axial flow 5140 tier 4 b (final) combine service repair manual (pin yfg014001 and above) (6)
New holland 9684 tractor service repair manualfjkskefkmem
This document provides instructions for removing, inspecting, and installing components of the air induction system on 84 Series tractors, including the air induction tube, rubber boot, and precleaner. The removal process involves removing shields, the hood, and clamps before separating parts. Inspection checks for cracks, wear, and debris. Installation follows the reverse of removal procedures and ensures a proper seal with tightened clamps.
Massey ferguson 5435 tractor ( - t163022 --- t186043) service parts catalogu...fjkskefkmem
This document provides a list of parts and their descriptions for Massey Ferguson 5425/5435 tractors. It includes 54 items ranging from engines and their components to cylinder blocks, crankshafts, pistons, and connecting rods. Each item is accompanied by a part number, quantity, description, and any relevant comments. The purpose is to provide the parts and specifications for servicing and repairing these tractor models.
Massey ferguson 5425 tractor (tier 3) service parts catalogue manual (part nu...fjkskefkmem
This document provides a list of parts and their descriptions for a Massey Ferguson 5425 Tier 3 tractor engine. It includes 45 line items with part numbers, quantities, descriptions, and additional comments. The parts listed are for the engine, fan drive section, cylinder block, crankshaft, pistons, and other components.
Massey ferguson 5425 tractor ( - t163022 --- t186043) service parts catalogu...fjkskefkmem
This document provides a list of parts and their descriptions for Massey Ferguson 5425/5435 tractors. It includes 54 items ranging from engines and their components to cylinder blocks, crankshafts, pistons, and connecting rods. Each item is accompanied by a part number, quantity, description, and any relevant comments. The parts are organized into sections for the engine and its equipment, cylinder block configurations for non-turbocharged and turbocharged models, and crankshaft, piston, and connecting rod components.
Massey ferguson 5410 tractor (tier 3) service parts catalogue manual (part nu...fjkskefkmem
This document provides a list of parts for a Massey Ferguson 5410 tractor engine. It includes 31 items ranging from major components like the cylinder block, crankshaft, and cylinder head, to smaller items like bolts, plugs, and seals. Each item is accompanied by a part number, quantity, brief description, and sometimes additional part number options or notes. The purpose is to identify all relevant parts for servicing and repair of the tractor engine.
Massey ferguson 2705 tractor service parts catalogue manual (part number 651...fjkskefkmem
This document provides a list of parts for a Massey Ferguson 2705 tractor engine. It includes 77 items ranging from complete engine assemblies to individual plugs, bolts, and other small parts. The document provides part numbers from both Massey Ferguson and Perkins, the engine manufacturer. It also includes notes on various part options and which were used in early versus late production engines.
Massey ferguson 2615 tractor service parts catalogue manual (part number 390...fjkskefkmem
The document contains a parts list and technical specifications for the engine, fuel, and exhaust systems of a Massey Ferguson 2615 tractor made in India for the US, Canada, and Turkey. It includes 58 pages listing over 1000 individual part numbers for the various engine and fuel system components, along with item descriptions and part references. The parts are organized by system (e.g. engine, fuel tank, air filter) and include some country-specific variations for components used in Turkey.
Massey ferguson 2435 stge tractor (utility) service parts catalogue manual (p...fjkskefkmem
This document provides part numbers and descriptions for engine components of a Massey Ferguson 2435 ST/GE tractor. It includes sections on the engine assembly, cylinder block, turbocharger, crankshaft and connecting rods, cylinder head, rocker shaft, timing gear and camshaft, and balancer unit. The document lists each component part number, description, and other relevant information to aid in tractor maintenance and repair.
Caterpillar cat 735 b articulated truck (prefix l4d) service repair manual (l...fjkskefkmem
The document provides disassembly instructions for output transfer gears on a 735B articulated truck. It describes 41 steps to fully disassemble the output transfer gears, including removing harnesses, hoses, bolts, washers, tubes, seals, bearings, gears, carriers, sleeves, and more. Various tools are required including pullers, stands, brackets, and forcing screws. Weights and torques are provided for some components. Detailed illustrations accompany each step.
This document provides instructions for removing and installing various components of a Caterpillar C15 engine, including:
- Installing the rear power take-off using various tools and ensuring proper positioning and torque of components.
- Removing and installing the vibration damper and pulley in two different procedures, noting weight and use of lifting devices and guide studs.
- Removing the crankshaft front seal using a slide hammer puller and puncturing holes for removal.
- Preparing the crankshaft and using a seal installer and locator to position the new crankshaft front seal and wear sleeve. Precise cleaning and installation is required without lubrication.
The document provides instructions for removing a gear pump used in the hoist system of a Caterpillar 735 articulated truck. It lists the required tools and outlines 34 steps to disassemble the pump. This includes removing hoses, seals, springs, pistons, plates, and other internal components. Proper cleaning and inspection of parts is emphasized along with using new replacement parts if anything is worn or damaged.
This document provides instructions for removing and installing various components of a Caterpillar C13 engine, including:
- Removing the flywheel housing using link brackets and sealant.
- Removing the vibration damper and pulley using a guide stud.
- Removing the crankshaft front seal by taking off nuts and leaving the shipping sleeve in place for reinstallation.
- Removing the front cover by taking off bolts and studs after removing the accessory drive and vibration damper/pulley.
- Removing the front gear group after removing the front cover by taking off bolts, bearings, shafts and gears.
- Removing the front housing after removing various other components by
Caterpillar cat 322 b ln excavator (prefix 2es) service repair manual (2es000...fjkskefkmem
This document provides instructions for removing and installing a governor and fuel injection control linkage on a Caterpillar 322B L excavator. The removal procedure involves using special tools to disconnect the governor from the engine and remove clips and pins connecting it to other components. The installation procedure specifies applying lubricant to new seals before installing components and using tools to reconnect the governor and install clips and pins. Proper torque specifications are listed for bolts and setscrews.
Caterpillar cat 322 b l excavator (prefix 2es) service repair manual (2es0000...fjkskefkmem
The document provides instructions for removing and installing a governor from a 3116 engine. It begins by listing the required tools. The removal procedure involves disconnecting linkages, removing clips and pins, and using special tools to slide parts out of position. New seals are installed during reassembly. Precise positioning and reconnecting of linkages is required to complete the installation.
Caterpillar cat 268 b skid steer loader (prefix lba) service repair manual (l...fjkskefkmem
The document provides instructions to remove and install the fuel injection pump, turbocharger, exhaust manifold, and inlet manifold on a Caterpillar 3044C engine. To remove the fuel injection pump, the cover and O-ring must be removed, timing marks made, bolts and housing removed, and a puller used to remove the gear. When installing, the components are reinstalled in reverse order while maintaining proper timing. The turbocharger and manifolds are removed by disconnecting connecting tubes and elbows and removing mounting bolts and gaskets. They are installed by reversing the removal steps and torquing bolts to the specified values.
Caterpillar cat 267 b multi terrain loader (prefix cyc) service repair manual...fjkskefkmem
This document provides disassembly instructions for the piston pump of a 267B, 277B, or 287B multi-terrain loader. It lists 43 steps to completely disassemble the pump. The steps include removing housing components, seals, springs, pistons, bearings, and other internal parts. Cleanliness is emphasized throughout to prevent contamination. Safety notices warn of potential injury from released springs or propelled parts.
Caterpillar cat 267 multi terrain loader (prefix cmp) service repair manual (...fjkskefkmem
This document provides instructions for removing and installing a flywheel, flywheel ring gear, crankshaft rear seal, flywheel housing, and crankshaft pulley on a 3034 engine. The procedures describe using various tools to remove bolts, drilling holes, lifting components, cleaning surfaces, and applying sealant. Precautions are outlined for preventing contamination and properly aligning and torquing parts.
Case sr250 sv300 tier 4 a alpha series skid steer loader service repair manualfjkskefkmem
This document is a service manual for CNH Industrial skid steer loaders and compact track loaders with Tier 4 engines. It provides maintenance and repair instructions for the engine, drivetrain, hydraulic and electrical systems, frames, wheels/tracks, climate control, front loader attachments, cab, and decals. Safety precautions are included to prevent personal injury and property damage when servicing the equipment. The manual is intended for use by service technicians and contains detailed technical information sectioned by vehicle system.
Case ih rb465 round baler service repair manualfjkskefkmem
This document is a service manual that provides information on servicing various components of Round Baler models RB455 and RB465, including the rear axle system, power take-off (PTO) drive shaft, brakes and controls, hydraulic systems, electrical systems, product feeding, pressing/bale formation, tying/wrapping/twisting, ejection, lubrication system, platform/cab/bodywork, and safety rules. It contains sections with titles corresponding to specific components and systems, as well as introductory information and tables of contents.
Case ih rb455 round baler service repair manual (pin ygn192828 and above)fjkskefkmem
This document is a service manual for Case IH round balers, models RB455, RB465, and RB565. It contains sections covering the rear axle, power take-off, hydraulic systems, hitches and couplings, frames and ballasting, electrical systems, product feeding, pressing and bale formation, tying/wrapping/twisting, ejection, lubrication, and safety information. The manual provides maintenance and repair instructions for the balers.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Link Product / Engine
Product Market Product Engine
AXIAL-FLOW® 5140 Model Year
2016, PIN YFG014001 and above
[YFG014001 - ]
North America F4HFE613C*B004
AXIAL-FLOW® 6140 Model Year
2016, PIN YFG014001 and above
[YFG014001 - ]
North America F2CFE613B*B
AXIAL-FLOW® 7140 Model Year
2016, PIN YFG014001 and above
[YFG014001 - ]
North America F2CFE613A*B
47956014 11/01/2016
3. Contents
INTRODUCTION
Engine....................................................................................... 10
[10.001] Engine and crankcase ............................................................. 10.1
[10.202] Air cleaners and lines .............................................................. 10.2
[10.206] Fuel filters .......................................................................... 10.3
[10.210] Lift pump and lines ................................................................. 10.4
[10.216] Fuel tanks .......................................................................... 10.5
[10.254] Intake and exhaust manifolds and muffler ......................................... 10.6
[10.304] Engine lubrication system.......................................................... 10.7
[10.310] Aftercooler.......................................................................... 10.8
[10.400] Engine cooling system ............................................................. 10.9
[10.408] Oil cooler and lines............................................................... 10.10
[10.414] Fan and drive .................................................................... 10.11
[10.419] Stationary air screen ............................................................. 10.12
[10.450] Engine air compressor ........................................................... 10.13
[10.500] Selective Catalytic Reduction (SCR) exhaust treatment ......................... 10.14
Main gearbox and drive ............................................................... 14
[14.100] Main gearbox and drive ............................................................ 14.1
Transmission.............................................................................. 21
[21.100] Mechanical transmission lubrication system ....................................... 21.1
[21.114] Mechanical transmission ........................................................... 21.2
[21.140] Mechanical transmission internal components..................................... 21.3
[21.145] Gearbox internal components...................................................... 21.4
[21.182] Differential.......................................................................... 21.5
Front axle system ....................................................................... 25
[25.100] Powered front axle ................................................................. 25.1
47956014 11/01/2016
4. [25.108] Final drive hub, steering knuckles, and shafts ..................................... 25.2
[25.310] Final drives ......................................................................... 25.3
Rear axle system........................................................................ 27
[27.124] Final drive hub, steering knuckles, and shafts ..................................... 27.1
[27.450] Rear-powered steerable axle ...................................................... 27.2
[27.550] Non-powered rear axle............................................................. 27.3
Hydrostatic drive......................................................................... 29
[29.100] Transmission and steering hydrostatic control ..................................... 29.1
[29.202] Hydrostatic transmission ........................................................... 29.2
[29.204] Reservoir, cooler, and lines ........................................................ 29.3
[29.218] Pump and motor components...................................................... 29.4
Brakes and controls .................................................................... 33
[33.110] Parking brake or parking lock ...................................................... 33.1
[33.202] Hydraulic service brakes ........................................................... 33.2
Hydraulic systems....................................................................... 35
[35.000] Hydraulic systems.................................................................. 35.1
[35.102] Pump control valves................................................................ 35.2
[35.106] Variable displacement pump ....................................................... 35.3
[35.220] Auxiliary hydraulic pump ........................................................... 35.4
[35.300] Reservoir, cooler, and filters........................................................ 35.5
[35.322] Regulated/Low pressure system ................................................... 35.6
[35.359] Main control valve.................................................................. 35.7
[35.410] Header or attachment height system .............................................. 35.8
[35.518] Reel control system ................................................................ 35.9
[35.536] Crop processor system .......................................................... 35.10
Steering..................................................................................... 41
[41.101] Steering control .................................................................... 41.1
[41.106] Tie rods............................................................................. 41.2
47956014 11/01/2016
5. [41.200] Hydraulic control components...................................................... 41.3
[41.206] Pump ............................................................................... 41.4
[41.216] Cylinders ........................................................................... 41.5
[41.432] Autoguidance steering ............................................................. 41.6
Wheels...................................................................................... 44
[44.511] Front wheels........................................................................ 44.1
Cab climate control ..................................................................... 50
[50.100] Heating ............................................................................. 50.1
[50.104] Ventilation .......................................................................... 50.2
[50.200] Air conditioning..................................................................... 50.3
[50.300] Cab pressurizing system ........................................................... 50.4
Electrical systems....................................................................... 55
[55.000] Electrical system ................................................................... 55.1
[55.010] Fuel injection system............................................................... 55.2
[55.011] Fuel tank system ................................................................... 55.3
[55.012] Engine cooling system ............................................................. 55.4
[55.013] Engine oil system .................................................................. 55.5
[55.014] Engine intake and exhaust system................................................. 55.6
[55.015] Engine control system.............................................................. 55.7
[55.019] Hydrostatic drive control system ................................................... 55.8
[55.020] Transmission speed sensors....................................................... 55.9
[55.023] Transmission position sensors ................................................... 55.10
[55.024] Transmission control system..................................................... 55.11
[55.030] Service brake electrical system .................................................. 55.12
[55.031] Parking brake electrical system .................................................. 55.13
[55.036] Hydraulic system control ......................................................... 55.14
[55.046] Rear axle control system......................................................... 55.15
[55.047] Steering control system .......................................................... 55.16
[55.050] Heating, Ventilation, and Air-Conditioning (HVAC) control system............... 55.17
47956014 11/01/2016
6. [55.100] Harnesses and connectors....................................................... 55.18
[55.201] Engine starting system ........................................................... 55.19
[55.202] Cold start aid ..................................................................... 55.20
[55.301] Alternator......................................................................... 55.21
[55.302] Battery............................................................................ 55.22
[55.404] External lighting .................................................................. 55.23
[55.405] External lighting switches and relays ............................................ 55.24
[55.408] Warning indicators, alarms, and instruments .................................... 55.25
[55.421] Feeding control system .......................................................... 55.26
[55.422] Ejection/Unloading control system ............................................... 55.27
[55.423] Cleaning control system.......................................................... 55.28
[55.426] Harvest material flow control system............................................. 55.29
[55.510] Cab or platform harnesses and connectors...................................... 55.30
[55.511] Light harnesses .................................................................. 55.31
[55.512] Cab controls...................................................................... 55.32
[55.518] Wiper and washer system........................................................ 55.33
[55.520] Cab harvesting controls .......................................................... 55.34
[55.525] Cab engine controls.............................................................. 55.35
[55.624] Residue handling control......................................................... 55.36
[55.628] Threshing electrical control ...................................................... 55.37
[55.640] Electronic modules ............................................................... 55.38
[55.661] Cab header controls.............................................................. 55.39
[55.662] Header height control ............................................................ 55.40
[55.670] Header leveling control........................................................... 55.41
[55.675] Reel speed and position control.................................................. 55.42
[55.680] Autopilot/Autoguidance .......................................................... 55.43
[55.780] Shaker shoe leveling system control............................................. 55.44
[55.785] Precision farming system ........................................................ 55.45
47956014 11/01/2016
7. [55.834] Sieve electric control ............................................................. 55.46
[55.836] Rotary separator control ......................................................... 55.47
[55.911] Global Positioning System (GPS) ................................................ 55.48
[55.988] Selective Catalytic Reduction (SCR) electrical system .......................... 55.49
[55.DTC] FAULT CODES.................................................................. 55.50
Product feeding .......................................................................... 60
[60.101] Feed roll............................................................................ 60.1
[60.105] Floating roll, feed chain, and drive ................................................. 60.2
[60.110] Feeder housing..................................................................... 60.3
[60.112] Stone trapping system ............................................................. 60.4
[60.120] Header drive system ............................................................... 60.5
[60.122] Length-of-cut gearbox.............................................................. 60.6
[60.150] Feeder drive system ............................................................... 60.7
[60.165] Feeder reverse system............................................................. 60.8
[60.500] Gearbox housing ................................................................... 60.9
Threshing .................................................................................. 66
[66.101] Concave conveyor plate ........................................................... 66.1
[66.110] Concave control system............................................................ 66.2
[66.260] Threshing mechanism drive system ............................................... 66.3
[66.321] Drum/Rotor variator with electrical control ......................................... 66.4
[66.330] Drum ............................................................................... 66.5
[66.331] Rotor ............................................................................... 66.6
Separation ................................................................................. 72
[72.220] Discharge beater ................................................................... 72.1
[72.410] Rotary separator drive system ..................................................... 72.2
[72.420] Rotary separator ................................................................... 72.3
Residue handling........................................................................ 73
[73.210] Straw chopper drive system........................................................ 73.1
47956014 11/01/2016
8. [73.230] Straw chopper...................................................................... 73.2
[73.230] Straw chopper...................................................................... 73.3
[73.430] Straw spreader ..................................................................... 73.4
Cleaning.................................................................................... 74
[74.000] Cleaning............................................................................ 74.1
[74.101] Cleaning drive systems ............................................................ 74.2
[74.114] Upper shaker shoe ................................................................. 74.3
[74.118] Lower shaker shoe ................................................................. 74.4
[74.130] Fan housing ........................................................................ 74.5
[74.136] Fan drive system ................................................................... 74.6
[74.140] Tailings return system .............................................................. 74.7
Crop storage / Unloading............................................................. 80
[80.101] Clean grain elevator................................................................ 80.1
[80.150] Grain tank .......................................................................... 80.2
[80.175] Grain tank unload drive system .................................................... 80.3
[80.180] Grain tank unload .................................................................. 80.4
Platform, cab, bodywork, and decals............................................. 90
[90.100] Engine hood and panels ........................................................... 90.1
[90.105] Machine shields and guards ....................................................... 90.2
[90.124] Pneumatically-adjusted operator seat.............................................. 90.3
[90.150] Cab................................................................................. 90.4
[90.151] Cab interior......................................................................... 90.5
47956014 11/01/2016
10. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE IH Sales and Service Networks.
47956014 11/01/2016
3
11. INTRODUCTION
Safety rules - Ecology and the environment
AXIAL-FLOW® 5140 NA
AXIAL-FLOW® 6140 NA
AXIAL-FLOW® 7140 NA
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. CASE IH
strongly recommends that you return all used batteries to a CASE IH dealer, who will
dispose of the used batteries or recycle the used batteries properly. In some countries,
this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
47956014 11/01/2016
4
12. INTRODUCTION
Safety rules - Personal safety
AXIAL-FLOW® 5140 NA
AXIAL-FLOW® 6140 NA
AXIAL-FLOW® 7140 NA
Carefully study these precautions, and those included in the external attachment operators
manual, and insist that they be followed by those working with and for you.
1. Thoroughly read and understand this manual and the attachment Operator’s Manual before operating this or any
other equipment.
2. Be sure all people and pets are clear of the machine before starting. Sound the horn, if equipped, three times
before starting engine.
3. Only the operator should be on the machine when in operation. Never allow anyone to climb on to the machine
while it is in motion. If the machine is equipped with an Instructors Seat, this must only be used for training
purposes. Passengers must not be allowed to use the Instructors Seat.
4. Keep all shields in place. Never work around the machine or any of the attachments while wearing loose clothing
that might catch on moving parts.
5. Observe the following precautions whenever lubricating the machine or making adjustments.
• Disengage all clutching levers or switches.
• Lower the attachment, if equipped, to the ground or raise the attachment completely and engage the cylinder
safety locks. Completing these actions will prevent the attachment from lowering unexpectedly.
• Engage the parking brake.
• Shut off the engine and remove the key.
• Wait for all machine movement to stop before leaving the operators platform.
6. Always keep the machine in gear while travelling downhill.
7. The machine should always be equipped with sufficient front or rear axle weight for safe operation.
8. Under some field conditions, more weight may be required at the front or rear axle for adequate stability. This is
especially important when operating in hilly conditions or/when using heavy attachments.
9. Always lower the attachment, shut off the engine, set the parking brake, engage the transmission gears, remove
the key and wait for all machine movement to stop before leaving the operators platform.
10. If the attachment or machine should become obstructed or plugged; set the parking brake, shut off the engine
and remove the key, engage the transmission gears, wait for all machine or attachment motion to come to a stop,
before leaving the operators platform to removing the obstruction or plug.
11. Never disconnect or make any adjustments to the hydraulic system unless the machine and/or the attachment is
lowered to the ground or the safety lock(s) is in the engaged position.
12. Use of the flashing lights is highly recommended when operating on a public road.
13. When transporting on a road or highway, use accessory lights and devices for adequate warning to the opera-
tors of other vehicles. In this regard, check local government regulations. Various safety lights and devices are
available from your CASE IH dealer.
14. Practice safety 365 days a year.
15. Keep all your equipment in safe operating condition.
16. Keep all guards and safety devices in place.
17. Always set the parking brake, shut off the engine and remove the key, engage the transmission gears, wait for all
machine or attachment motion to come to a stop, before leaving the operators platform to service the machine
and attachment.
18. Remember: A careful operator is the best insurance against an accident.
19. Extreme care should be taken in keeping hands and clothing away from moving parts.
47956014 11/01/2016
5
14. Engine - Engine and crankcase
Engine - Remove engine oil drain line and drain valve
Prior operation:
Engine - Drain fluid (10.001)
5140
1. Remove the engine oil drain hose (1) from the elbow
connector (2) at oil pan and at the oil drain valve (3).
NH12AF001332A 1
NHIL14AF00236AA 2
2. Remove the elbow connector from oil pan.
NHIL14AF00237AA 3
47956014 11/01/2016
10.1 [10.001] / 3
15. Engine - Engine and crankcase
3. Remove the drain valve (1) from the bulkhead support
bracket (2) by removing the lock nut (3).
NHIL14AF00235AA 4
6140 and 7140
4. Remove the engine oil drain hose (1) from the oil pan
and at the oil drain valve (2).
NHIL14AF00234AA 5
NHIL13AF02228AA 6
47956014 11/01/2016
10.1 [10.001] / 4
16. Engine - Engine and crankcase
5. Remove the drain valve (1) from the bulkhead support
bracket (2) by removing the lock nut (3).
NOTE: The drain valve is located behind the SAS (station-
ary air screen).
NHIL14AF00235AA 7
47956014 11/01/2016
10.1 [10.001] / 5
17. Engine - Engine and crankcase
Engine - Install engine oil drain line and drain valve
5140
1. Install the oil drain valve (1) to the bulkhead support
bracket (2). Install the lock nut (3) and tighten to 60 -
68 N·m (44 - 50 lb ft).
NOTE: The oil drain valve is located behind the SAS (sta-
tionary air screen).
NHIL14AF00235AA 1
NOTE: Before installing the 90 ° connector (1), check the O-rings for any wear and replace if needed. Make sure the
O-rings are lubricated with clean oil or petroleum jelly before installing.
2. Install the 90 ° connector (1) to the oil pan and position it
with the hose connection facing the cooler box. Tighten
the connector to 60 - 66 N·m (44 - 49 lb ft)
NHIL14AF00237AA 2
3. Install the engine oil drain hose (1) to the 90 ° connector
at oil pan. Torque the fitting (2) at connector to 60 -
68 N·m (44 - 50 lb ft).
NH12AF001332A 3
47956014 11/01/2016
10.1 [10.001] / 6
18. Engine - Engine and crankcase
4. Install the other end of hose (1) to the drain valve (2).
Tighten the fitting to 60 - 68 N·m (44 - 50 lb ft)
NHIL14AF00236AA 4
6140 and 7140
5. Install the drain valve (1) to the bulkhead support
bracket (2). Install the lock nut (3) and tighten to 60 -
68 N·m (44 - 50 lb ft).
NHIL14AF00235AA 5
6. Install the engine oil drain hose (1) to the oil pan.
Torque the banjo bolt (2) at the oil pan to 60 - 66 N·m
(44 - 49 lb ft)
NHIL14AF00234AA 6
47956014 11/01/2016
10.1 [10.001] / 7
19. Engine - Engine and crankcase
7. Install the other end of hose (1) to the drain valve (2).
Tighten the fitting to 60 - 68 N·m (44 - 50 lb ft)
NHIL13AF02228AA 7
Next operation:
Engine - Filling engine oil (10.001)
47956014 11/01/2016
10.1 [10.001] / 8
20. Engine - Engine and crankcase
Engine - Change fluid – Maintenance Chart – Recommended
operating temperature range
AXIAL-FLOW® 5140 NA
AXIAL-FLOW® 6140 NA
AXIAL-FLOW® 7140 NA
CJ-4 and CI-4 oils
(H) 0W-40 CJ-4 UNITEK to MAT3521
(H) API CI-4 0W-40
(H) API CI-4 10W-30
(H) 10W-40 CJ-4 UNITEK to CNH MAT3521
(H) API CI-4 10W-40
(H) 15W-40 CJ-4 UNITEK to CNH MAT3521
(H) API CI-4 15W-40
API CI-4 20W-50
-40 °C
-40 °F
-30 °C
-22 °F
-20 °C
-4 °F
-10 °C
14 °F
0 °C
32 °F
10 °C
50 °F
20 °C
68 °F
30 °C
86 °F
40 °C
104 °F
50 °C
122 °F
(H) Engine oil pan or coolant block heater recommended in this range
47956014 11/01/2016
10.1 [10.001] / 9
21. Engine - Engine and crankcase
Engine - Remove engine serpentine belt
AXIAL-FLOW® 5140 Model Year 2016, PIN YFG014001 and above
[YFG014001 - ]
NA
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
1. Open the engine and rotor drive access doors.
NHIL14AF00372AA 1
2. Remove the fan access panel (1) from the engine com-
partment.
NH12AF00292A 2
47956014 11/01/2016
10.1 [10.001] / 10
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. Engine - Engine and crankcase
3. Use a 0.5 in ratchet wrench on the belt tensioner (1) to
relieve the tension on the serpentine belt and remove
it from the engine.
NHIL14AF00382AA 3
47956014 11/01/2016
10.1 [10.001] / 11
24. Engine - Engine and crankcase
Engine - Install engine serpentine belt
AXIAL-FLOW® 5140 Model Year 2016, PIN YFG014001 and above
[YFG014001 - ]
NA
Prior operation:
Engine - Remove engine serpentine belt (10.001)
1. Use a 0.5 in ratchet wrench on the belt tensioner (1) to
relieve the tension to install the serpentine belt to the
engine pulleys. Route the belt as shown.
NHIL14AF00382AA 1
2. Install the fan access panel (1) to the engine compart-
ment.
NH12AF00292A 2
3. Close the engine and rotor drive access doors.
NHIL14AF00372AA 3
47956014 11/01/2016
10.1 [10.001] / 12
25. Engine - Engine and crankcase
Engine - Remove engine serpentine belt
AXIAL-FLOW® 6140 Model Year 2016, PIN YFG014001 and above
[YFG014001 - ]
NA
AXIAL-FLOW® 7140 Model Year 2016, PIN YFG014001 and above
[YFG014001 - ]
NA
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
1. Open the engine and rotor drive access doors.
NHIL14AF00372AA 1
2. Remove the fan access panel (1) from the engine com-
partment.
NH12AF00292A 2
47956014 11/01/2016
10.1 [10.001] / 13