This document provides an introduction and overview for the service manual for Case IH 3152 and 3162 draper headers. It outlines important safety information, environmental procedures, identification details, and general specifications for the machine. Safety rules are provided for equipment servicing, personal safety, PTO safety locks, transport locking assemblies, and safety signs. It also includes sections on torque specifications, shop practices, product identification, and machine orientation.
Toro hydroject 3000 service repair manualfjsjekkdmmemm
This service manual provides information for technicians to troubleshoot, test, and repair the Hydroject 3000/4000 water injection system. It contains chapters covering safety, the engine, hydraulic system, electrical system, water system, wheels and brakes. Technicians are instructed to follow all safety procedures and refer to the operator's manual for operating instructions. The manual outlines maintenance schedules, specifications, diagrams, testing procedures, and repair instructions for the various systems.
Toro greensmaster 1600 service repair manualfjsjekkdmmemm
This service manual provides information to service and repair components on the Greensmaster 1000/1600 golf course mowers. It begins with safety instructions and includes specifications, adjustments, and repair procedures for the engine, drive system, electrical system, controls, cutting unit, and optional grooming reel kit. Tables of contents, part numbers, and diagrams are included for each system.
Stihl fs 50 trimmer service repair manualfjsjekkdmmemm
The document provides specifications and troubleshooting information for STIHL Series 4144 engine components, including the FS 40, FS 50, FS 56, FC 56, and KM 56 models. It covers specifications for the engine, fuel system, ignition system, and tightening torques. Troubleshooting sections address issues that may occur with the clutch, rewind starter, ignition system, carburetor, and engine. The document also provides detailed instructions for servicing all major engine components and systems.
Stihl fs 46 trimmer service repair manualfjsjekkdmmemm
This document provides specifications and troubleshooting information for STIHL components. It includes specifications for fuel systems, gearboxes, and tightening torques. Troubleshooting sections cover issues with clutches, blade locks, rewind starters, fuel systems, and engines. The document provides causes and remedies for various conditions. It aims to help technicians properly service and repair STIHL equipment.
Stihl 017 chainsaw service repair manualfjsjekkdmmemm
This document provides specifications and repair instructions for STIHL chain saw models 017 and 018 from 2000-2006. It includes sections on the engine, fuel system, ignition system, clutch, chain drive, and other components. Detailed steps are provided for disassembling and assembling parts like the chain brake, rewind starter, carburetor, and more. Tightening torques and special tools required for repairs are also listed.
New holland tvt145 tractor service repair manualfjsjekkdmmemm
This document provides technical specifications and repair instructions for engines used in Case IH 797 tractors, including the 620.95, 620.96, 620.97, 620.98, and 620.99 engines. It covers details of the cylinder block, cylinder head, valves, crankshaft, pistons, con-rods, flywheel, timing gears, lubrication system, cooling system, and intake/exhaust system. The document also describes the electronic engine control system and provides job instructions for maintenance, repair, and replacement of engine components.
New holland tt65 tier3 engine, 2 wd tractor service repair manualfjsjekkdmmemm
The document is a service manual that provides technical specifications, functional descriptions, and service instructions for engines used in various tractor models. It contains detailed sections on the engine and crankcase, including specifications, torque values, seals, description of components, removal and installation instructions, and lists of required special tools. The manual serves as a reference for maintenance and repair of engine and crankcase components.
New holland ts110 a tractor service repair manualfjsjekkdmmemm
This repair manual summary covers procedures for separating major components of TS-series tractors, including:
1. Separating the front axle and front support from the engine.
2. Separating the engine and front support from the transmission.
3. Separating the transmission, engine and front support from the rear axle.
4. Removing the engine from the tractor.
5. Removing the transmission from the tractor.
6. Procedures for removing the cab from tractors equipped with cab suspension.
The summary provides an overview of the contents and procedures covered in the repair manual for disassembling major systems on TS100A, TS110A, TS115A
Toro hydroject 3000 service repair manualfjsjekkdmmemm
This service manual provides information for technicians to troubleshoot, test, and repair the Hydroject 3000/4000 water injection system. It contains chapters covering safety, the engine, hydraulic system, electrical system, water system, wheels and brakes. Technicians are instructed to follow all safety procedures and refer to the operator's manual for operating instructions. The manual outlines maintenance schedules, specifications, diagrams, testing procedures, and repair instructions for the various systems.
Toro greensmaster 1600 service repair manualfjsjekkdmmemm
This service manual provides information to service and repair components on the Greensmaster 1000/1600 golf course mowers. It begins with safety instructions and includes specifications, adjustments, and repair procedures for the engine, drive system, electrical system, controls, cutting unit, and optional grooming reel kit. Tables of contents, part numbers, and diagrams are included for each system.
Stihl fs 50 trimmer service repair manualfjsjekkdmmemm
The document provides specifications and troubleshooting information for STIHL Series 4144 engine components, including the FS 40, FS 50, FS 56, FC 56, and KM 56 models. It covers specifications for the engine, fuel system, ignition system, and tightening torques. Troubleshooting sections address issues that may occur with the clutch, rewind starter, ignition system, carburetor, and engine. The document also provides detailed instructions for servicing all major engine components and systems.
Stihl fs 46 trimmer service repair manualfjsjekkdmmemm
This document provides specifications and troubleshooting information for STIHL components. It includes specifications for fuel systems, gearboxes, and tightening torques. Troubleshooting sections cover issues with clutches, blade locks, rewind starters, fuel systems, and engines. The document provides causes and remedies for various conditions. It aims to help technicians properly service and repair STIHL equipment.
Stihl 017 chainsaw service repair manualfjsjekkdmmemm
This document provides specifications and repair instructions for STIHL chain saw models 017 and 018 from 2000-2006. It includes sections on the engine, fuel system, ignition system, clutch, chain drive, and other components. Detailed steps are provided for disassembling and assembling parts like the chain brake, rewind starter, carburetor, and more. Tightening torques and special tools required for repairs are also listed.
New holland tvt145 tractor service repair manualfjsjekkdmmemm
This document provides technical specifications and repair instructions for engines used in Case IH 797 tractors, including the 620.95, 620.96, 620.97, 620.98, and 620.99 engines. It covers details of the cylinder block, cylinder head, valves, crankshaft, pistons, con-rods, flywheel, timing gears, lubrication system, cooling system, and intake/exhaust system. The document also describes the electronic engine control system and provides job instructions for maintenance, repair, and replacement of engine components.
New holland tt65 tier3 engine, 2 wd tractor service repair manualfjsjekkdmmemm
The document is a service manual that provides technical specifications, functional descriptions, and service instructions for engines used in various tractor models. It contains detailed sections on the engine and crankcase, including specifications, torque values, seals, description of components, removal and installation instructions, and lists of required special tools. The manual serves as a reference for maintenance and repair of engine and crankcase components.
New holland ts110 a tractor service repair manualfjsjekkdmmemm
This repair manual summary covers procedures for separating major components of TS-series tractors, including:
1. Separating the front axle and front support from the engine.
2. Separating the engine and front support from the transmission.
3. Separating the transmission, engine and front support from the rear axle.
4. Removing the engine from the tractor.
5. Removing the transmission from the tractor.
6. Procedures for removing the cab from tractors equipped with cab suspension.
The summary provides an overview of the contents and procedures covered in the repair manual for disassembling major systems on TS100A, TS110A, TS115A
New holland ts90 tractor service repair manualfjsjekkdmmemm
This document is a repair manual containing specifications for various systems of TS90, TS100, and TS110 vehicles including the engine, electrical system, hydraulic systems, braking and steering systems, power train, front axle, power take-off, and air conditioning. It provides detailed technical specifications, measurements, clearances, and other parameters for proper repair and maintenance of these vehicles. The document is organized into various sections covering the different vehicle systems.
New holland tk4020 v tractor service repair manualfjsjekkdmmemm
This document is a service manual for tractor models TK4020F, TK4020V, TK4030F, TK4030V, TK4030, TK4040M, TK4040, TK4050M, TK4050, and TK4060. It contains introduction sections on safety rules, basic instructions, and consumables to be used during service. The bulk of the manual provides technical content on the engine, clutch, transmission, rear axle system, power take-off, brakes and controls, hydraulic systems, steering clutches, tracks and track suspension, electrical systems, and the platform, cab, and bodywork of the tractors.
New holland t7520 tractor service repair manualfjsjekkdmmemm
The document is a service manual that provides technical specifications, diagrams, and repair/maintenance procedures for tractor models T7510, T7520, T7530, T7540, and T7550. The manual covers various systems of the tractors, including the engine and its components, transmission, axles, hydraulics, brakes, electrical systems, and more. Each section provides detailed information on components, specifications, troubleshooting procedures, and repair instructions.
New holland t6020 tractor service repair manualfjsjekkdmmemm
This document provides repair and maintenance instructions for tractor models TS100A, TS110A, TS115A, TS125A, TS130A, TS135A, T6010, T6020, T6030, T6050, and T6070. It includes sections on general safety, product identification, specifications, dimensions, and minimum hardware tightening torques. Safety precautions are marked as DANGER, WARNING, or CAUTION. Personal protective equipment is recommended when performing any maintenance or repairs.
New holland t9.565 stage iv tractor service repair manualfjsjekkdmmemm
This document is a service manual for Case IH T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 tractors. It provides instructions for removing and installing the engine and crankcase on the 9-liter T9.390 tractor, 13-liter single turbo T9.450, T9.505, and T9.560 tractors, and 13-liter two stage turbo T9.615 and T9.670 tractors. The manual also contains information on air cleaners and lines, the engine cooling system, fan and drive, and the selective catalytic reduction exhaust treatment system.
New holland t8.300 tractor service repair manualfjsjekkdmmemm
This document is a service manual that provides information on servicing and repairing various systems for tractor models T8.275, T8.300, T8.330, T8.360, T8.390, and T8.420, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other components. The manual contains safety instructions, torque specifications, fluid capacities and provides section references to detailed information on troubleshooting and repairing individual tractor systems.
New holland t7.315 auto command stage iv tractor service repair manualfjsjekkdmmemm
This document is a service manual for T7.290 and T7.315 AutoCommand tractors from CNH Industrial. It contains over 55 sections covering all major tractor systems including the engine, transmission, hydraulics, electrical systems, climate control, frames and more. Each section provides information on components, operation, and repair procedures. The manual is intended to guide service technicians in properly maintaining and repairing the tractors.
New holland t4.90 v tractor service repair manualfjsjekkdmmemm
This document is a service manual that provides specifications and repair/maintenance procedures for various tractor models and components. It includes sections covering the engine, transmission, axles, hydraulics, steering, brakes, hitches and other systems. Each section includes links to individual components and subsections with detailed information.
New holland t4.75 lp tractor service repair manualfjsjekkdmmemm
This document is a service manual for various tractor models including the T4.75F, T4.85F, T4.95F, and T4.105F. It contains over 50 sections covering all major tractor systems from the engine and transmission to hydraulics, steering, electrical systems, and more. Each section provides information on components, operation, and repair/service procedures for the various subsystems that comprise the tractors.
This document provides definitions for common abbreviations used in tractor operator manuals. It then lists various universal symbols seen on tractor instruments and controls, providing explanations of their meanings. Finally, it provides safety guidelines for operating tractors, including instructions for starting and using the engine, transmission, PTO, hitch, and other components as well as recommendations for maintenance.
Kohler command pro cv1000 vertical crankshaft service repair manualfjsjekkdmmemm
This service manual provides information for servicing a vertical crankshaft Command Pro engine models CV940-CV1000. The manual contains 10 sections covering safety, tools, troubleshooting, air/fuel systems, electrical systems, disassembly, inspection, reassembly, and lubrication. Section 1 outlines important safety precautions to follow when servicing the engine, including warnings about rotating parts, hot parts, hazardous chemicals, explosive and toxic fumes. It also explains how to identify the engine using model, specification and serial numbers.
This document is a service manual that provides safety and technical information for maintaining Command vertical crankshaft engines, models CV11-16, CV460-465, and CV490-495. The manual contains 11 sections covering topics such as safety, troubleshooting, air and fuel systems, electrical systems, disassembly, inspection, and reassembly. The introduction section emphasizes important safety precautions and provides information on identifying engine models. It also provides oil and fuel recommendations, noting the importance of using the proper oil and fuel types.
Kawasaki tj27 d 2 stroke air-cooled gasoline engine service repair manualfjsjekkdmmemm
This document is the service manual for a TJ27D 2-stroke air-cooled gasoline engine. It provides information on locating specific topics, lists abbreviations used, covers emission control systems and tampering guidelines, and includes a foreword on safely and properly using the manual for maintenance and repair. The manual contains sections on general information, periodic maintenance, fuel system, engine top end, crankshaft, electrical system, recoil starter, troubleshooting and more.
Kawasaki kel26 a handheld edger service repair manualfjsjekkdmmemm
This document is the service manual for the KEL26A handheld edger. It contains information for mechanics on servicing the edger such as specifications, maintenance procedures, torque specifications, and part numbers. The manual instructs technicians to clean parts thoroughly before service to avoid abrasion, follow tightening sequences carefully, use proper torque values, and take safety precautions like wearing gloves when working on the engine. It also lists abbreviations used and emission control information for the engine.
Kawasaki kbh43 a trimmer brushcutter service repair manualfjsjekkdmmemm
This document provides information for servicing trimmer/brushcutter engines produced by Kawasaki Heavy Industries, Ltd. It begins with notices regarding copyright and liability. It then lists abbreviations used in service manuals. The next section describes the exhaust emission control systems on the engines and prohibits tampering with emission control components. The foreword provides guidance on using the manual and maintaining equipment. It also introduces common symbols used in the manual. Finally, there is a section titled "Before Servicing" that outlines important points to follow when servicing the engines.
Hyster k005 (h5.00 xm europe) forklift service repair manualfjsjekkdmmemm
The document provides instructions for repairing various components of a lift truck including the counterweight, hood, overhead guard, LED lights, operator restraint system, radiator, and exhaust system. The counterweight repair section describes how to safely remove and install the counterweight using lifting eyebolts and a lifting device. The radiator repair section explains how to drain the coolant before removing the radiator, and notes the need to add coolant after installation. Safety warnings are provided throughout regarding putting the lift truck on blocks and adding additional blocks when removing heavy components to maintain stability.
Hyster h177 (h2.50 xm) forklift parts catalogue manualfjsjekkdmmemm
This document is a parts manual for a Challenger H2.00-H3.20XM truck. It is divided into 13 sections covering the frame, engines, fuel system, electrical system, transmission, steering, brakes, hydraulics, mast systems, options, and a numerical index. Section 1 covers the frame and includes diagrams and part numbers for components such as the overhead guard, floorplates, hood, seats, labels, and other frame parts.
Hyster h006 (h135 ft) forklift service repair manualfjsjekkdmmemm
This document provides instructions for servicing various components of a lift truck, including:
1) Removing and installing side covers, seats, dashes, and hoods.
2) Inspecting operator restraint systems like seat belts.
3) Removing and installing steering columns, dashes, kick panels, and seal plates.
4) Removing and installing hood supports and door assemblies.
The document contains detailed step-by-step instructions and diagrams to guide maintenance and repairs. Safety warnings are also provided about putting the lift truck on blocks during work.
Hyster f187 (s60 ft) forklift service repair manualfjsjekkdmmemm
The document provides instructions for repairing components of a transmission. It describes how to remove and replace the transmission's torque converter. Key steps include separating the transmission from the engine, draining the transmission oil, and removing the torque converter. A new torque converter, gasket, oil filter, and charge pump are installed. Bolts are tightened to specified torques to reassemble the transmission housing and attach it back to the engine.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
New holland ts90 tractor service repair manualfjsjekkdmmemm
This document is a repair manual containing specifications for various systems of TS90, TS100, and TS110 vehicles including the engine, electrical system, hydraulic systems, braking and steering systems, power train, front axle, power take-off, and air conditioning. It provides detailed technical specifications, measurements, clearances, and other parameters for proper repair and maintenance of these vehicles. The document is organized into various sections covering the different vehicle systems.
New holland tk4020 v tractor service repair manualfjsjekkdmmemm
This document is a service manual for tractor models TK4020F, TK4020V, TK4030F, TK4030V, TK4030, TK4040M, TK4040, TK4050M, TK4050, and TK4060. It contains introduction sections on safety rules, basic instructions, and consumables to be used during service. The bulk of the manual provides technical content on the engine, clutch, transmission, rear axle system, power take-off, brakes and controls, hydraulic systems, steering clutches, tracks and track suspension, electrical systems, and the platform, cab, and bodywork of the tractors.
New holland t7520 tractor service repair manualfjsjekkdmmemm
The document is a service manual that provides technical specifications, diagrams, and repair/maintenance procedures for tractor models T7510, T7520, T7530, T7540, and T7550. The manual covers various systems of the tractors, including the engine and its components, transmission, axles, hydraulics, brakes, electrical systems, and more. Each section provides detailed information on components, specifications, troubleshooting procedures, and repair instructions.
New holland t6020 tractor service repair manualfjsjekkdmmemm
This document provides repair and maintenance instructions for tractor models TS100A, TS110A, TS115A, TS125A, TS130A, TS135A, T6010, T6020, T6030, T6050, and T6070. It includes sections on general safety, product identification, specifications, dimensions, and minimum hardware tightening torques. Safety precautions are marked as DANGER, WARNING, or CAUTION. Personal protective equipment is recommended when performing any maintenance or repairs.
New holland t9.565 stage iv tractor service repair manualfjsjekkdmmemm
This document is a service manual for Case IH T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 tractors. It provides instructions for removing and installing the engine and crankcase on the 9-liter T9.390 tractor, 13-liter single turbo T9.450, T9.505, and T9.560 tractors, and 13-liter two stage turbo T9.615 and T9.670 tractors. The manual also contains information on air cleaners and lines, the engine cooling system, fan and drive, and the selective catalytic reduction exhaust treatment system.
New holland t8.300 tractor service repair manualfjsjekkdmmemm
This document is a service manual that provides information on servicing and repairing various systems for tractor models T8.275, T8.300, T8.330, T8.360, T8.390, and T8.420, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other components. The manual contains safety instructions, torque specifications, fluid capacities and provides section references to detailed information on troubleshooting and repairing individual tractor systems.
New holland t7.315 auto command stage iv tractor service repair manualfjsjekkdmmemm
This document is a service manual for T7.290 and T7.315 AutoCommand tractors from CNH Industrial. It contains over 55 sections covering all major tractor systems including the engine, transmission, hydraulics, electrical systems, climate control, frames and more. Each section provides information on components, operation, and repair procedures. The manual is intended to guide service technicians in properly maintaining and repairing the tractors.
New holland t4.90 v tractor service repair manualfjsjekkdmmemm
This document is a service manual that provides specifications and repair/maintenance procedures for various tractor models and components. It includes sections covering the engine, transmission, axles, hydraulics, steering, brakes, hitches and other systems. Each section includes links to individual components and subsections with detailed information.
New holland t4.75 lp tractor service repair manualfjsjekkdmmemm
This document is a service manual for various tractor models including the T4.75F, T4.85F, T4.95F, and T4.105F. It contains over 50 sections covering all major tractor systems from the engine and transmission to hydraulics, steering, electrical systems, and more. Each section provides information on components, operation, and repair/service procedures for the various subsystems that comprise the tractors.
This document provides definitions for common abbreviations used in tractor operator manuals. It then lists various universal symbols seen on tractor instruments and controls, providing explanations of their meanings. Finally, it provides safety guidelines for operating tractors, including instructions for starting and using the engine, transmission, PTO, hitch, and other components as well as recommendations for maintenance.
Kohler command pro cv1000 vertical crankshaft service repair manualfjsjekkdmmemm
This service manual provides information for servicing a vertical crankshaft Command Pro engine models CV940-CV1000. The manual contains 10 sections covering safety, tools, troubleshooting, air/fuel systems, electrical systems, disassembly, inspection, reassembly, and lubrication. Section 1 outlines important safety precautions to follow when servicing the engine, including warnings about rotating parts, hot parts, hazardous chemicals, explosive and toxic fumes. It also explains how to identify the engine using model, specification and serial numbers.
This document is a service manual that provides safety and technical information for maintaining Command vertical crankshaft engines, models CV11-16, CV460-465, and CV490-495. The manual contains 11 sections covering topics such as safety, troubleshooting, air and fuel systems, electrical systems, disassembly, inspection, and reassembly. The introduction section emphasizes important safety precautions and provides information on identifying engine models. It also provides oil and fuel recommendations, noting the importance of using the proper oil and fuel types.
Kawasaki tj27 d 2 stroke air-cooled gasoline engine service repair manualfjsjekkdmmemm
This document is the service manual for a TJ27D 2-stroke air-cooled gasoline engine. It provides information on locating specific topics, lists abbreviations used, covers emission control systems and tampering guidelines, and includes a foreword on safely and properly using the manual for maintenance and repair. The manual contains sections on general information, periodic maintenance, fuel system, engine top end, crankshaft, electrical system, recoil starter, troubleshooting and more.
Kawasaki kel26 a handheld edger service repair manualfjsjekkdmmemm
This document is the service manual for the KEL26A handheld edger. It contains information for mechanics on servicing the edger such as specifications, maintenance procedures, torque specifications, and part numbers. The manual instructs technicians to clean parts thoroughly before service to avoid abrasion, follow tightening sequences carefully, use proper torque values, and take safety precautions like wearing gloves when working on the engine. It also lists abbreviations used and emission control information for the engine.
Kawasaki kbh43 a trimmer brushcutter service repair manualfjsjekkdmmemm
This document provides information for servicing trimmer/brushcutter engines produced by Kawasaki Heavy Industries, Ltd. It begins with notices regarding copyright and liability. It then lists abbreviations used in service manuals. The next section describes the exhaust emission control systems on the engines and prohibits tampering with emission control components. The foreword provides guidance on using the manual and maintaining equipment. It also introduces common symbols used in the manual. Finally, there is a section titled "Before Servicing" that outlines important points to follow when servicing the engines.
Hyster k005 (h5.00 xm europe) forklift service repair manualfjsjekkdmmemm
The document provides instructions for repairing various components of a lift truck including the counterweight, hood, overhead guard, LED lights, operator restraint system, radiator, and exhaust system. The counterweight repair section describes how to safely remove and install the counterweight using lifting eyebolts and a lifting device. The radiator repair section explains how to drain the coolant before removing the radiator, and notes the need to add coolant after installation. Safety warnings are provided throughout regarding putting the lift truck on blocks and adding additional blocks when removing heavy components to maintain stability.
Hyster h177 (h2.50 xm) forklift parts catalogue manualfjsjekkdmmemm
This document is a parts manual for a Challenger H2.00-H3.20XM truck. It is divided into 13 sections covering the frame, engines, fuel system, electrical system, transmission, steering, brakes, hydraulics, mast systems, options, and a numerical index. Section 1 covers the frame and includes diagrams and part numbers for components such as the overhead guard, floorplates, hood, seats, labels, and other frame parts.
Hyster h006 (h135 ft) forklift service repair manualfjsjekkdmmemm
This document provides instructions for servicing various components of a lift truck, including:
1) Removing and installing side covers, seats, dashes, and hoods.
2) Inspecting operator restraint systems like seat belts.
3) Removing and installing steering columns, dashes, kick panels, and seal plates.
4) Removing and installing hood supports and door assemblies.
The document contains detailed step-by-step instructions and diagrams to guide maintenance and repairs. Safety warnings are also provided about putting the lift truck on blocks during work.
Hyster f187 (s60 ft) forklift service repair manualfjsjekkdmmemm
The document provides instructions for repairing components of a transmission. It describes how to remove and replace the transmission's torque converter. Key steps include separating the transmission from the engine, draining the transmission oil, and removing the torque converter. A new torque converter, gasket, oil filter, and charge pump are installed. Bolts are tightened to specified torques to reassemble the transmission housing and attach it back to the engine.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
6. Contents
INTRODUCTION
Foreword - Important notice regarding equipment servicing (*) ................................ 3
Safety rules - Ecology and the environment (*) ................................................. 4
Safety rules (*) .................................................................................. 5
Safety rules - Personal safety (*) ............................................................... 6
Power Take-Off (PTO) shaft - Safety rules - Power Take-Off (PTO) (*) ......................... 7
Transport locking assembly Cylinder stop - Safety rules - Lift cylinder safety locks (*) ......... 8
Safety signs (*) ................................................................................ 10
Torque - Minimum tightening torques for normal assembly (*) ............................... 21
Torque - Standard torque data for hydraulics (*) .............................................. 26
Basic instructions - Shop and assembly (*) ................................................... 28
Basic instructions - Chain wear tables - Roller chains (*) ..................................... 30
General specification - General welding (*) ................................................... 32
General specification Machine specifications - Flex headers (*) ............................. 33
General specification Machine specifications - Rigid headers (*) ............................ 35
Capacities (*) ................................................................................. 37
Product identification (*) ...................................................................... 39
Machine orientation - Machine orientation .................................................... 40
(*) See content for specific models
48144004 08/05/2017
2
7. INTRODUCTION
Foreword - Important notice regarding equipment servicing
3152
3162
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE IH Sales and Service Networks.
48144004 08/05/2017
3
8. INTRODUCTION
Safety rules - Ecology and the environment
3152
3162
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. CASE IH
strongly recommends that you return all used batteries to a CASE IH dealer, who will
dispose of the used batteries or recycle the used batteries properly. In some countries,
this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
48144004 08/05/2017
4
9. INTRODUCTION
Safety rules
3152
3162
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
48144004 08/05/2017
5
10. INTRODUCTION
Safety rules - Personal safety
3152
3162
Carefully study these precautions, and those included in the external attachment operators
manual, and insist that they be followed by those working with and for you.
1. Thoroughly read and understand this manual and the attachment Operator’s Manual before operating this or any
other equipment.
2. Be sure all people and pets are clear of the machine before starting. Sound the horn, if equipped, three times
before starting engine.
3. Only the operator should be on the machine when in operation. Never allow anyone to climb on to the machine
while it is in motion. If the machine is equipped with an Instructors Seat, this must only be used for training
purposes. Passengers must not be allowed to use the Instructors Seat.
4. Keep all shields in place. Never work around the machine or any of the attachments while wearing loose clothing
that might catch on moving parts.
5. Observe the following precautions whenever lubricating the machine or making adjustments.
• Disengage all clutching levers or switches.
• Lower the attachment, if equipped, to the ground or raise the attachment completely and engage the cylinder
safety locks. Completing these actions will prevent the attachment from lowering unexpectedly.
• Engage the parking brake.
• Shut off the engine and remove the key.
• Wait for all machine movement to stop before leaving the operators platform.
6. Always keep the machine in gear while travelling downhill.
7. The machine should always be equipped with sufficient front or rear axle weight for safe operation.
8. Under some field conditions, more weight may be required at the front or rear axle for adequate stability. This is
especially important when operating in hilly conditions or/when using heavy attachments.
9. Always lower the attachment, shut off the engine, set the parking brake, engage the transmission gears, remove
the key and wait for all machine movement to stop before leaving the operators platform.
10. If the attachment or machine should become obstructed or plugged; set the parking brake, shut off the engine
and remove the key, engage the transmission gears, wait for all machine or attachment motion to come to a stop,
before leaving the operators platform to removing the obstruction or plug.
11. Never disconnect or make any adjustments to the hydraulic system unless the machine and/or the attachment is
lowered to the ground or the safety lock(s) is in the engaged position.
12. Use of the flashing lights is highly recommended when operating on a public road.
13. When transporting on a road or highway, use accessory lights and devices for adequate warning to the opera-
tors of other vehicles. In this regard, check local government regulations. Various safety lights and devices are
available from your CASE IH dealer.
14. Practice safety 365 days a year.
15. Keep all your equipment in safe operating condition.
16. Keep all guards and safety devices in place.
17. Always set the parking brake, shut off the engine and remove the key, engage the transmission gears, wait for all
machine or attachment motion to come to a stop, before leaving the operators platform to service the machine
and attachment.
18. Remember: A careful operator is the best insurance against an accident.
19. Extreme care should be taken in keeping hands and clothing away from moving parts.
48144004 08/05/2017
6
11. INTRODUCTION
Power Take-Off (PTO) shaft - Safety rules - Power Take-Off (PTO)
3152
3162
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
The Power Take-Off (PTO) shaft on your header is
equipped with a drive shaft shield (1) and chains. The
shields protect the operator from the PTO shaft while the
shaft is rotating. The shield chains prevent the shield
from rotating while the PTO shaft is connected to the
combine and turning.
83112562 1
The rear PTO shaft, that connects to the combine, right-
hand side chain (1) is attached to a loop in the adapter.
Connect the left hand shield chain to the hole provided in
the steel PTO slip clutch shield.
83118612 2
The front PTO shaft, that drives the auger, right-hand side
chain (1) hooks to hole in backsheet (2).
Left side chain (4) hooks to hole in backsheet (3).
83112562A 3
48144004 08/05/2017
7
12. INTRODUCTION
Transport locking assembly Cylinder stop - Safety rules - Lift
cylinder safety locks
3152
3162
WARNING
Crushing hazard!
ALWAYS make sure the work area is clear of bystanders and domestic animals before raising or low-
ering the equipment.
Failure to comply could result in death or serious injury.
W0123A
Your CASE IH header is equipped with reel lift cylinder
locks (1).
NOTE: The header must be connected to the combine for
operation.
To engage the lift cylinder locks:
1. Use your combine’s reel lift switch to raise the reel
completely.
2. Lift the lock from its storage holder (2).
83112567 1
Left-hand side
83112568 2
Right-hand side
48144004 08/05/2017
8
13. INTRODUCTION
3. Swing the lock (1) down over the cylinder shaft.
83114725 1 3
Left-hand side
83117559 4
Center, split reel equipped only
83112595 5
Right-hand side
To store the locks:
1. If the reel has settled so that the locks are against
the cylinders;
• Raise the reel to it's highest point.
2. Raise the lock from the cylinder and place it in on the
storage hanger (1).
3. Lower the reel to the desired height.
83114726 6
48144004 08/05/2017
9
14. INTRODUCTION
Safety signs
3152 Rigid draper header (40 ft), export [YHH051300 - ]
3152 Rigid draper header (45 ft) [YHH051300 - ]
3152 Rigid draper header (45 ft), export [YHH051300 - ]
3152 Rigid draper header (25 ft) [YHH051300 - ]
3152 Rigid draper header (30 ft) [YHH051300 - ]
3152 Rigid draper header (35 ft) [YHH051300 - ]
3152 Rigid draper header (40 ft) [YHH051300 - ]
3152 [YHH051300 - ] ANZ --- APAC --- MEA --- NA --- WE ---
3162 Flex draper header (25 ft) [YHH051300 - ]
3162 Flex draper header (30 ft) [YHH051300 - ]
3162 Flex draper header (35 ft) [YHH051300 - ]
3162 Flex draper header (40 ft) [YHH051300 - ]
3162 Flex draper header (40 ft), export [YHH051300 - ]
3162 Flex draper header (45 ft) [YHH051300 - ]
3162 Flex draper header (45 ft), export [YHH051300 - ]
3162 [YHH051300 - ] ANZ --- APAC --- MEA --- WE ---
The following safety signs are placed on your machine as a guide for your safety and for those working with you. Walk
around the machine and note the content and location of these safety signs before operating your machine.
Keep safety signs clean and legible. Clean safety signs with a soft cloth, water, and a gentle detergent. Do not use
solvent, gasoline, or other harsh chemicals. Solvents, gasoline, and other harsh chemicals may damage or remove
safety signs.
Replace all safety signs that are damaged, missing, painted over, or illegible. If a safety sign is on a part that is
replaced, make sure the safety sign is installed on the new part. See your dealer for replacement safety signs.
Safety signs that display the “Read Operator’s Manual” symbol are intended to direct
the operator to the operator’s manual for further information regarding maintenance,
adjustments, or procedures for particular areas of the machine. When a safety sign
displays this symbol, refer to the appropriate page of the operator’s manual.
83112557 1
Rear view
48144004 08/05/2017
10
15. INTRODUCTION
NHIL16GH00436AA 2 NHIL16GH00437AA 3
Left - hand side Right - hand side
WARNING
Slippery surface.
Do not use this area as a step or platform.
Failure to comply could result in death or serious
injury.
Quantity: 2
87026533
87026533_B 4
(4) Left-Hand (LH) side of feeder opening on the top rail.
93112558 5
(7) Right-Hand (RH) side of feeder opening on the top
rail.
93112558 6
48144004 08/05/2017
11
16. INTRODUCTION
WARNING
Crush Hazard.
Engage safety latch before working under machine.
Failure to comply could cause death or serious
injury.
Quantity: 2
84027712
87027712 7
(9) RH side feeder opening.
83112566 8
(11) LH side feeder opening.
83112563 9
48144004 08/05/2017
12
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. INTRODUCTION
WARNING
Shield is missing.
Stand clear.
Replace or close shield before operating machine.
Failure to comply could cause death or serious
injury.
Quantity: 1
86999254
86999254 10
(15) LH side feeder opening.
83112561 11
48144004 08/05/2017
13
19. INTRODUCTION
DANGER
Rotating drive line.
Keep all shields and guards in place.
Failure to comply will result in death or serious
injury.
Quantity: 2
86520062
86520062_B 12
(2) On the Power Take-Off (PTO) PTO shaft cover.
83112562 13
(12) On the PTO shaft cover.
83112562 14
48144004 08/05/2017
14
20. INTRODUCTION
CAUTION
Stay clear of hot surface.
Failure to do so could result in minor or moderate
injury.
Quantity: 2
84004742
84004742 15
(3) On the hydraulic reservoir.
NHIL12GH00272AA 16
(8) On the hydraulic reservoir.
NHIL12GH00273AA 17
48144004 08/05/2017
15