The document provides instructions to remove an engine from a mini excavator. It begins by listing safety warnings and precautions. The removal process involves draining fluids, disconnecting hoses and electrical connections, and removing mounting brackets and supports using various sized wrenches. Over 15 steps are outlined to fully detach the engine from the excavator.
Case cx26 c mini excavator service repair manualfujsjefjsekkem
The document provides instructions to remove an engine from a mini excavator. It begins by listing safety warnings and precautions. The removal process involves draining fluids, disconnecting hoses and electrical connections, and removing mounting brackets and supports using various sized wrenches. Over 15 steps are outlined to fully detach the engine from the excavator.
Case cx57 c mini excavator service repair manual instant downloadufjskekkemm
The document is a service manual that provides maintenance and repair information for a CX57C mini excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, electrical systems, booms/dippers/buckets, dozer blades, and platforms/cabs. Each section includes subsections for specific components or systems. The manual provides part numbers, diagrams, removal and installation instructions, and troubleshooting information.
Case cx57 c mini excavator service repair manualfusjejfskekfmsme
The document is a service manual that provides information on servicing various components of a mini excavator. It includes sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms/dippers/buckets, dozer blades, and platforms/cabs. The engine section provides maintenance instructions for the engine and crankcase, valve drive and gears, cylinder heads, connecting rods and pistons, crankshaft and flywheel, fuel system, air intake and exhaust systems, cooling system, lubrication system, and other engine components.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...ufjjsjdkkskem
This document is a service manual for an E60C Mini Excavator. It contains over 200 sections organized into topics such as the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms/dippers/buckets, dozer blades, and the platform/cab/bodywork. Each section provides instructions and specifications for servicing different components of the excavator. The manual also contains introductory information and safety warnings for working on the equipment.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...ujfdjjkskkdme
The document is a service manual that provides instructions for removing the engine from an E60C Mini Excavator. It outlines 33 steps to remove components like panels, hoses, filters, and electrical connections to fully separate the engine from the excavator. The goal is to allow access to service the engine, which involves removing parts in a specific sequence while taking safety precautions.
New holland e30 c cab tier 4 final engine mini excavator service repair manua...ufjjsjdkkskem
This service manual provides maintenance and repair instructions for the E30C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and cab components. Safety precautions are outlined, and each component is described in individual subsections with part numbers. The manual is intended to be used by qualified service technicians and includes warnings about using only approved replacement parts.
New holland e30 c canopy tier 4 final engine mini excavator service repair ma...ujdjjkkskmme
This service manual provides maintenance and repair instructions for the E30C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and cab components. Safety precautions are outlined, and each component is described in individual subsections with part numbers. The manual is intended to be used by qualified service technicians and includes warnings about using only approved replacement parts.
New holland e30 c canopy tier 4 final engine mini excavator service repair ma...ufjjsjdkkskem
This service manual provides maintenance and repair instructions for the E30C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and cab components. Safety precautions are outlined, and each component is described in individual subsections with part numbers. The manual is intended to guide qualified service personnel in maintenance and repairs.
Case cx26 c mini excavator service repair manualfujsjefjsekkem
The document provides instructions to remove an engine from a mini excavator. It begins by listing safety warnings and precautions. The removal process involves draining fluids, disconnecting hoses and electrical connections, and removing mounting brackets and supports using various sized wrenches. Over 15 steps are outlined to fully detach the engine from the excavator.
Case cx57 c mini excavator service repair manual instant downloadufjskekkemm
The document is a service manual that provides maintenance and repair information for a CX57C mini excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, electrical systems, booms/dippers/buckets, dozer blades, and platforms/cabs. Each section includes subsections for specific components or systems. The manual provides part numbers, diagrams, removal and installation instructions, and troubleshooting information.
Case cx57 c mini excavator service repair manualfusjejfskekfmsme
The document is a service manual that provides information on servicing various components of a mini excavator. It includes sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms/dippers/buckets, dozer blades, and platforms/cabs. The engine section provides maintenance instructions for the engine and crankcase, valve drive and gears, cylinder heads, connecting rods and pistons, crankshaft and flywheel, fuel system, air intake and exhaust systems, cooling system, lubrication system, and other engine components.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...ufjjsjdkkskem
This document is a service manual for an E60C Mini Excavator. It contains over 200 sections organized into topics such as the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms/dippers/buckets, dozer blades, and the platform/cab/bodywork. Each section provides instructions and specifications for servicing different components of the excavator. The manual also contains introductory information and safety warnings for working on the equipment.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...ujfdjjkskkdme
The document is a service manual that provides instructions for removing the engine from an E60C Mini Excavator. It outlines 33 steps to remove components like panels, hoses, filters, and electrical connections to fully separate the engine from the excavator. The goal is to allow access to service the engine, which involves removing parts in a specific sequence while taking safety precautions.
New holland e30 c cab tier 4 final engine mini excavator service repair manua...ufjjsjdkkskem
This service manual provides maintenance and repair instructions for the E30C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and cab components. Safety precautions are outlined, and each component is described in individual subsections with part numbers. The manual is intended to be used by qualified service technicians and includes warnings about using only approved replacement parts.
New holland e30 c canopy tier 4 final engine mini excavator service repair ma...ujdjjkkskmme
This service manual provides maintenance and repair instructions for the E30C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and cab components. Safety precautions are outlined, and each component is described in individual subsections with part numbers. The manual is intended to be used by qualified service technicians and includes warnings about using only approved replacement parts.
New holland e30 c canopy tier 4 final engine mini excavator service repair ma...ufjjsjdkkskem
This service manual provides maintenance and repair instructions for the E30C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and cab components. Safety precautions are outlined, and each component is described in individual subsections with part numbers. The manual is intended to guide qualified service personnel in maintenance and repairs.
Case cx57 c mini excavator service repair manualfjjsekksekmm
This document is a service manual for a Mini Excavator model CX57C. It contains sections covering the engine, hydraulic systems, pneumatic system, frames and ballasting, tracks and track suspension, cab climate control, and electrical systems. Safety instructions are provided, noting the different signal words used to indicate the level of hazard and stressing the importance of understanding all safety messages before operating or servicing the equipment. The table of contents lists subsections for each system of the excavator.
Case cx57 c mini excavator service repair manualfujjsefksekmem
This document is a service manual for a Mini Excavator CX57C. It contains sections covering the engine, hydraulic systems, pneumatic system, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blade and arm, platform, cab, bodywork, and decals. Safety instructions are provided, noting that repair and maintenance should only be done by qualified personnel and any unauthorized work may void warranties. The manual contains detailed technical information, diagrams, and troubleshooting codes to aid in servicing the excavator.
Case cx57 c mini excavator service repair manualhfjsjekfksmem
This document is a service manual for a Mini Excavator CX57C. It contains sections covering the engine, hydraulic systems, pneumatic system, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blade and arm, platform, cab, bodywork, and decals. Safety instructions are provided, noting that only qualified personnel should perform repair and maintenance following the procedures in the manual.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...ujdjfjkskmdm
This document is a service manual for an E60C Mini Excavator. It contains over 200 sections organized by system (e.g. engine, hydraulic systems, electrical systems) providing repair and maintenance instructions. Each section includes part numbers and diagrams. The introduction emphasizes that only qualified dealership personnel should perform repairs following the procedures precisely and using recommended tools. It defines signal words for safety alerts and stresses reading all safety messages before operating or servicing the equipment.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...fujsjfskekmm
The document is a service manual that provides instructions for removing the engine from an E60C Mini Excavator. It outlines 33 steps to remove components like panels, hoses, filters, and electrical connections to fully separate the engine from the excavator. The manual emphasizes safety precautions and cautions technicians to relieve pressure, use lifting equipment properly, and avoid burns from hot components.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...ufjkskemfseol
This document is a service manual for an E60C Mini Excavator that contains information on engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork, and decals. It provides safety instructions and outlines the contents and organization of the manual.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...fusjefjskefkksem
This document is a service manual for an E60C Mini Excavator. It contains over 200 sections organized by system (e.g. engine, hydraulic systems, electrical systems) providing repair and maintenance instructions. Each section includes part numbers and diagrams. The introduction emphasizes that only qualified dealership personnel should perform repairs following the procedures precisely and using recommended tools. It defines signal words for safety alerts and stresses reading all safety messages before operating or servicing the equipment.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...fhjsekfksemert
This document is a service manual for an E60C Mini Excavator. It contains over 200 sections organized into topics such as the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms/dippers/buckets, dozer blades, and the cab/bodywork. Each section provides repair and maintenance instructions for a specific component of the excavator. The introduction emphasizes that only qualified dealership personnel should perform repairs following the procedures in the manual using any special tools as needed.
New holland e30 c canopy tier 4 final engine mini excavator service repair ma...fujsjefkskekmem
This document is a service manual for the E30C mini excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork, and decals. Safety information is provided, noting signal words for dangers, warnings, and cautions regarding potential hazards. The manual is intended to guide qualified service personnel in maintenance and repair work.
New holland e30 c cab tier 4 final engine mini excavator service repair manualfusjfskeekemm
This document is a service manual for an E30C mini excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork, and decals. Safety information is provided, noting signal words for dangers, warnings, and cautions regarding potential hazards. The manual is intended to guide qualified service personnel in maintenance and repair work.
New holland e30 c canopy tier 4 final engine mini excavator service repair ma...fujsjfjksekem
This service manual provides maintenance and repair instructions for the E30C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and cab components. Safety precautions are outlined, and each component is described in individual subsections with part numbers. The manual is intended to be used by qualified service technicians and includes warnings about using only approved replacement parts.
New holland e30 c cab tier 4 final engine mini excavator service repair manualufjjdkksmeme
This service manual provides maintenance and repair instructions for the E30C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and cab components. Safety precautions are outlined, and each component is described in individual subsections with part numbers. The manual is intended to be used by qualified service technicians and mechanics to service and repair the excavator.
New holland e30 c cab tier 4 final engine mini excavator service repair manualudfjjjdkksmmd
This document is a service manual for the E30C mini excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork, and decals. Safety information is provided, noting signal words for dangers, warnings, and cautions regarding potential hazards. The manual is intended to guide qualified service personnel in maintenance and repair work.
Case cx39 b hydraulic mini excavator service repair manualufjjskefksemm
This document provides safety precautions and instructions for servicing a machine. It outlines general procedures such as preparing for disassembly, cleaning the machine, recording inspection details, and arranging the work area. It emphasizes wearing protective equipment and blocking or supporting the machine during repairs. Instructions are given for safely disassembling and reassembling hydraulic, electrical, and welding components. Environmental protection measures are also noted. International unit conversion tables are included at the end.
Case cx35 b series 2 mini excavator service repair manualufjjskefksemm
The document is a service manual that provides information on servicing various components of a CX35B and CX39B Series 2 Mini Excavator, including the engine, hydraulic systems, frames, tracks, cab climate control, electrical systems, booms/dippers/buckets, dozer blade, platform/cab/bodywork, and decals. It contains detailed sections with part numbers and diagrams on maintenance and repair of the excavator's various systems.
Case cx15 b series 2 mini excavator service repair manualufjjskefksemm
The document is a service manual that provides specifications and repair/maintenance instructions for CX15B and CX18B Series 2 Mini Excavators. It contains sections on the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms/dippers/buckets, dozer blade, cab/bodywork, and decals. The engine section includes specifications for the L3E-31KBSA diesel engine and descriptions of its components such as the fuel injection system, cooling system, and lubrication system.
Case 3550 crawler dozer service repair manualufjjskefksemm
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
Case 1150 m tier 2 crawler dozer service repair manual (pin ncdc11500 and above)ufjjskefksemm
This document is a service manual for the 1150M Tier 2 Crawler Dozer that replaces an earlier part number. It provides information on servicing the dozer's engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, and other components. The manual includes specifications, component locations, maintenance procedures, and troubleshooting information to aid technicians in repairing and maintaining the dozer.
Case 595 sle loader backhoe service repair manualufjjskefksemm
This document provides instructions for removing and installing the engine and radiator on a Case backhoe loader. It begins by having the machine parked on level ground with the loader raised and supported. The hood is then opened and bolts/nuts are removed from the hood pivot point. Another person helps lift the hood off while hoses and wires are disconnected and tagged for identification. Caps and plugs are used to close disconnected fittings.
Case 595 lsp loader backhoe service repair manualufjjskefksemm
This document provides instructions for removing and installing the engine and radiator on a Case backhoe loader. It outlines 8 steps for radiator removal, which include parking the machine, raising the loader, opening the hood, removing bolts from the hood pivot point, and having an assistant help remove retainers and lower the hood. It also describes removing hoses, wires, and fans to fully remove the radiator. Reinstallation follows the reverse order.
Case 590 sn two wheel drive (2wd) tier 4b (final) tractor loader backhoe serv...ufjjskefksemm
This document is a service manual for Case tractor loader backhoes models 580N, 580SN, 580SN WT, 590SN from 2015-2020. It contains information on engine systems, transmission, axles, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, front loader/bucket, booms/dippers/buckets, and cab/bodywork. The manual instructs qualified technicians on repair and maintenance procedures and notes that only authorized personnel should perform repairs using the proper tools and following the instructions carefully.
Case 590 sn two wheel drive (2wd) tier 3 tractor loader backhoe service repai...ufjjskefksemm
This document is a service manual for Case tractor loader backhoes models 580N, 580SN, 580SN WT, 590SN from 2015. It contains sections on the engine, transmission, front and rear axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control and electrical systems. The manual provides maintenance and repair information for technicians on these backhoe models.
More Related Content
Similar to Case cx26 c mini excavator service repair manual
Case cx57 c mini excavator service repair manualfjjsekksekmm
This document is a service manual for a Mini Excavator model CX57C. It contains sections covering the engine, hydraulic systems, pneumatic system, frames and ballasting, tracks and track suspension, cab climate control, and electrical systems. Safety instructions are provided, noting the different signal words used to indicate the level of hazard and stressing the importance of understanding all safety messages before operating or servicing the equipment. The table of contents lists subsections for each system of the excavator.
Case cx57 c mini excavator service repair manualfujjsefksekmem
This document is a service manual for a Mini Excavator CX57C. It contains sections covering the engine, hydraulic systems, pneumatic system, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blade and arm, platform, cab, bodywork, and decals. Safety instructions are provided, noting that repair and maintenance should only be done by qualified personnel and any unauthorized work may void warranties. The manual contains detailed technical information, diagrams, and troubleshooting codes to aid in servicing the excavator.
Case cx57 c mini excavator service repair manualhfjsjekfksmem
This document is a service manual for a Mini Excavator CX57C. It contains sections covering the engine, hydraulic systems, pneumatic system, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blade and arm, platform, cab, bodywork, and decals. Safety instructions are provided, noting that only qualified personnel should perform repair and maintenance following the procedures in the manual.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...ujdjfjkskmdm
This document is a service manual for an E60C Mini Excavator. It contains over 200 sections organized by system (e.g. engine, hydraulic systems, electrical systems) providing repair and maintenance instructions. Each section includes part numbers and diagrams. The introduction emphasizes that only qualified dealership personnel should perform repairs following the procedures precisely and using recommended tools. It defines signal words for safety alerts and stresses reading all safety messages before operating or servicing the equipment.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...fujsjfskekmm
The document is a service manual that provides instructions for removing the engine from an E60C Mini Excavator. It outlines 33 steps to remove components like panels, hoses, filters, and electrical connections to fully separate the engine from the excavator. The manual emphasizes safety precautions and cautions technicians to relieve pressure, use lifting equipment properly, and avoid burns from hot components.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...ufjkskemfseol
This document is a service manual for an E60C Mini Excavator that contains information on engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork, and decals. It provides safety instructions and outlines the contents and organization of the manual.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...fusjefjskefkksem
This document is a service manual for an E60C Mini Excavator. It contains over 200 sections organized by system (e.g. engine, hydraulic systems, electrical systems) providing repair and maintenance instructions. Each section includes part numbers and diagrams. The introduction emphasizes that only qualified dealership personnel should perform repairs following the procedures precisely and using recommended tools. It defines signal words for safety alerts and stresses reading all safety messages before operating or servicing the equipment.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...fhjsekfksemert
This document is a service manual for an E60C Mini Excavator. It contains over 200 sections organized into topics such as the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms/dippers/buckets, dozer blades, and the cab/bodywork. Each section provides repair and maintenance instructions for a specific component of the excavator. The introduction emphasizes that only qualified dealership personnel should perform repairs following the procedures in the manual using any special tools as needed.
New holland e30 c canopy tier 4 final engine mini excavator service repair ma...fujsjefkskekmem
This document is a service manual for the E30C mini excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork, and decals. Safety information is provided, noting signal words for dangers, warnings, and cautions regarding potential hazards. The manual is intended to guide qualified service personnel in maintenance and repair work.
New holland e30 c cab tier 4 final engine mini excavator service repair manualfusjfskeekemm
This document is a service manual for an E30C mini excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork, and decals. Safety information is provided, noting signal words for dangers, warnings, and cautions regarding potential hazards. The manual is intended to guide qualified service personnel in maintenance and repair work.
New holland e30 c canopy tier 4 final engine mini excavator service repair ma...fujsjfjksekem
This service manual provides maintenance and repair instructions for the E30C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and cab components. Safety precautions are outlined, and each component is described in individual subsections with part numbers. The manual is intended to be used by qualified service technicians and includes warnings about using only approved replacement parts.
New holland e30 c cab tier 4 final engine mini excavator service repair manualufjjdkksmeme
This service manual provides maintenance and repair instructions for the E30C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and cab components. Safety precautions are outlined, and each component is described in individual subsections with part numbers. The manual is intended to be used by qualified service technicians and mechanics to service and repair the excavator.
New holland e30 c cab tier 4 final engine mini excavator service repair manualudfjjjdkksmmd
This document is a service manual for the E30C mini excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork, and decals. Safety information is provided, noting signal words for dangers, warnings, and cautions regarding potential hazards. The manual is intended to guide qualified service personnel in maintenance and repair work.
Similar to Case cx26 c mini excavator service repair manual (13)
Case cx39 b hydraulic mini excavator service repair manualufjjskefksemm
This document provides safety precautions and instructions for servicing a machine. It outlines general procedures such as preparing for disassembly, cleaning the machine, recording inspection details, and arranging the work area. It emphasizes wearing protective equipment and blocking or supporting the machine during repairs. Instructions are given for safely disassembling and reassembling hydraulic, electrical, and welding components. Environmental protection measures are also noted. International unit conversion tables are included at the end.
Case cx35 b series 2 mini excavator service repair manualufjjskefksemm
The document is a service manual that provides information on servicing various components of a CX35B and CX39B Series 2 Mini Excavator, including the engine, hydraulic systems, frames, tracks, cab climate control, electrical systems, booms/dippers/buckets, dozer blade, platform/cab/bodywork, and decals. It contains detailed sections with part numbers and diagrams on maintenance and repair of the excavator's various systems.
Case cx15 b series 2 mini excavator service repair manualufjjskefksemm
The document is a service manual that provides specifications and repair/maintenance instructions for CX15B and CX18B Series 2 Mini Excavators. It contains sections on the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms/dippers/buckets, dozer blade, cab/bodywork, and decals. The engine section includes specifications for the L3E-31KBSA diesel engine and descriptions of its components such as the fuel injection system, cooling system, and lubrication system.
Case 3550 crawler dozer service repair manualufjjskefksemm
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
Case 1150 m tier 2 crawler dozer service repair manual (pin ncdc11500 and above)ufjjskefksemm
This document is a service manual for the 1150M Tier 2 Crawler Dozer that replaces an earlier part number. It provides information on servicing the dozer's engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, and other components. The manual includes specifications, component locations, maintenance procedures, and troubleshooting information to aid technicians in repairing and maintaining the dozer.
Case 595 sle loader backhoe service repair manualufjjskefksemm
This document provides instructions for removing and installing the engine and radiator on a Case backhoe loader. It begins by having the machine parked on level ground with the loader raised and supported. The hood is then opened and bolts/nuts are removed from the hood pivot point. Another person helps lift the hood off while hoses and wires are disconnected and tagged for identification. Caps and plugs are used to close disconnected fittings.
Case 595 lsp loader backhoe service repair manualufjjskefksemm
This document provides instructions for removing and installing the engine and radiator on a Case backhoe loader. It outlines 8 steps for radiator removal, which include parking the machine, raising the loader, opening the hood, removing bolts from the hood pivot point, and having an assistant help remove retainers and lower the hood. It also describes removing hoses, wires, and fans to fully remove the radiator. Reinstallation follows the reverse order.
Case 590 sn two wheel drive (2wd) tier 4b (final) tractor loader backhoe serv...ufjjskefksemm
This document is a service manual for Case tractor loader backhoes models 580N, 580SN, 580SN WT, 590SN from 2015-2020. It contains information on engine systems, transmission, axles, brakes, hydraulics, frames, steering, wheels, climate control, electrical systems, front loader/bucket, booms/dippers/buckets, and cab/bodywork. The manual instructs qualified technicians on repair and maintenance procedures and notes that only authorized personnel should perform repairs using the proper tools and following the instructions carefully.
Case 590 sn two wheel drive (2wd) tier 3 tractor loader backhoe service repai...ufjjskefksemm
This document is a service manual for Case tractor loader backhoes models 580N, 580SN, 580SN WT, 590SN from 2015. It contains sections on the engine, transmission, front and rear axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control and electrical systems. The manual provides maintenance and repair information for technicians on these backhoe models.
Case 590 sn four wheel drive (4wd) tier 4b (final) tractor loader backhoe ser...ufjjskefksemm
This document is a service manual for Case tractor loader backhoes models 580N, 580SN, 580SN WT, and 590SN. It contains sections on the engine, transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, booms dippers and buckets, and the platform, cab, bodywork and decals. The manual provides part numbers, specifications, and repair and maintenance instructions for technicians servicing the equipment.
Case cx250 d nlc (tier4 final) crawler excavator service repair manualufjjskefksemm
This document is a service manual that provides specifications and maintenance information for the CX250D Crawler Excavator. It includes sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and the platform, cab and bodywork. The first section provides details on the engine, including its identification, static description, cooling system specifications, and electrical system specifications. It outlines the engine model, displacement, cooling type, lubrication system, fuel system, and other key technical details.
Case 588 wheeled hydraulic excavator service repair manualufjjskefksemm
The document provides instructions for removing and installing an engine on 588 excavators. Key steps include:
1. Disconnecting the battery cables and removing access panels.
2. Removing the exhaust silencer, outlet tube, and connecting hose to the turbocharger.
3. Detaching wiring harnesses from engine sensors and solenoids.
4. Using a lifting device to remove the upper hood and side panel for access.
Case cx225 sr crawler excavator service repair manualufjjskefksemm
This document provides service manuals and schematics for the CX225SR crawler excavator. It includes:
- A table of contents listing manuals and schematics for the excavator and its components.
- Safety rules and instructions for working on the excavator.
- Specifications for the excavator including dimensions, weights, torque values and product identification numbers.
Case cx210 d, cx210d long reach crawler excavator service repair manualufjjskefksemm
This document is a service manual for the CX210D Crawler Excavator. It contains instructions for repair and maintenance work that must only be performed by qualified dealership personnel using the proper tools and procedures. The manufacturer is not responsible for damages caused by unauthorized parts or repairs. The manual contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, electrical systems, booms/dippers/buckets, and other machine components.
Case 588 crawler hydraulic excavator service repair manualufjjskefksemm
The document provides instructions for removing and installing an engine on 588 excavators. Key steps include:
1. Disconnecting the battery cables and removing access panels.
2. Removing the exhaust silencer, outlet tube, and connecting hose to the turbocharger.
3. Identifying engine wiring and sensors that need to be disconnected, such as the oil pressure sensor.
4. Using lifting equipment to remove the upper hood and side panels for access.
Case cx39 b series 2 mini excavator service repair manualufjjskefksemm
This document is a service manual for CX35B and CX39B Series 2 mini excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, dozer blade and arm, and the platform, cab, bodywork and decals. Safety rules are provided at the beginning, emphasizing the importance of only qualified personnel performing repairs and maintenance using the proper procedures and tools.
Case cx35 b hydraulic mini excavator service repair manualufjjskefksemm
This document provides safety precautions and instructions for servicing a machine. It outlines general procedures such as preparing for disassembly, cleaning the machine, recording inspection details, and arranging the work area. It emphasizes wearing protective equipment and blocking or supporting the machine during repairs. Instructions are given for safely disassembling and handling hydraulic, electrical, and welding components. International unit conversion tables are also included.
Case 580 st backhoe loader service repair manualufjjskefksemm
This document is a service manual that contains technical specifications and maintenance/repair instructions for backhoe loaders. It includes sections on safety rules, maintenance, engine specifications, transmission types/components, front axle types, and troubleshooting guides. Specifications are provided for loader and backhoe attachment performance, dimensions, lifting capacities, and more. Detailed instructions cover removal, disassembly, assembly and troubleshooting of components like transmissions and axles.
Case cx30 c mini excavator service repair manualufjjskefksemm
This document is a service manual for a CX30C mini excavator. It provides specifications and repair/maintenance instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms/dippers/buckets, dozer blade, and platform/cab components. The engine section includes specifications, component identification diagrams, and repair/maintenance procedures for the engine and crankcase, valve drive and gears, cylinder heads, connecting rods/pistons, crankshaft/flywheel, fuel system, air cleaners/lines, intake/exhaust manifolds, cooling system, fan/drive, and lubrication system.
Case 580 sn wt four wheel drive (4wd) tier 4b (final), wide track tractor loa...ufjjskefksemm
This document is a service manual that provides information on servicing and repairing Case 580N, 580SN, 580SN WT, and 590SN Tier 4B (final) Tractor Loader Backhoes. It includes sections covering the engine, transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, booms dippers and buckets, and the platform, cab, bodywork and decals. The manual provides part numbers and specifications to support servicing of components.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
6. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE CONSTRUCTION Sales and Service Networks.
51422576 22/01/2018
3
7. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
51422576 22/01/2018
4
8. INTRODUCTION
Safety rules - General information
Cleaning
Clean the metal parts with cleaning solution that meets the standard and steam cleaning. (except for bearings)
After cleaning, dry well, and inject oil in all parts.
Also inject oil into the bearings after drying.
Inspection
When disassembling parts, check all the parts.
If there are any worn or damaged parts, replace them.
Inspect carefully to prevent initial breakdowns.
Bearing
Replace any loose bearings.
Air dry bearings before installing them.
Needle bearing
When inserting needle bearings, be very careful not to damage them.
Apply grease to the section where the needle bearing will be inserted.
Gear
Check that there is no wear and no damage.
Oil seal, O-ring, gasket
Always install new oil seals, O-rings, and gaskets.
Apply grease to sections where oil seals and O-rings will be inserted.
Shaft
Check that there is no wear and no damage.
Check the bearings and check for damaged oil seals on the shaft.
Service parts
Install CASE CONSTRUCTION genuine service parts.
When placing an order, check the parts catalog. It contains the CASE CONSTRUCTION genuine part numbers.
Any breakdowns arising from the installation of non-genuine parts are not covered by the warranty.
Lubricants (fuel, hydraulic oil)
Use the oil from the specified company or specified in the operator's manual or service Manual.
Any breakdowns arising from any fuel or hydraulic oil other than those specified are not covered by the warranty.
51422576 22/01/2018
5
10. Engine - Engine and crankcase
Engine - General specification
Engine main data
Item Engine model D1305-E4B
Number of Cylinder 3
Engine Type Vertical, water-cooled, 4-cycle diesel engine
Bore × Stroke 78.0 – 88.0 mm (3.07 – 3.46 in)
Total Displacement 1261 cm³ (76.95 in³)
ISO Net Continuous 15.5 kW (21.1 Hp) 2600 RPM
ISO/SAE Net Intermittent 17.9 kW (24.3 Hp) 2600 RPM
SAE Gross Intermittent 18.5 kW (25.2 Hp) 2600 RPM
Maximum Bare Speed 2820 RPM
Minimum Bare Idling Speed 1100 RPM
Combustion Chamber Spherical type (E-TVCS)
Fuel Injection Pump Bosch MD type mini pump
Governor All speed mechanical governor
Direction of Rotation Counter-clockwise (viewed from flywheel side)
Injection Nozzle Mini Nozzle (DNOPD)
Injection Timing 0.2793 rad 16.00 °C before top dead centre
Firing Order 1-2-3
Injection Pressure 13.73 MPa (1992 psi)
Compression Ratio 24 : 1
Lubricating System Forced lubrication by trochoid pump
Oil Pressure Indicating Electrical type switch
Lubricating Filter Full flow paper filter (Cartridge type)
Cooling System
Pressurized radiator, forced circulation with water
pump
Starting System Electric Starting with Starter
Starter Motor 12 V, 1.2 kW (1.6 Hp)
Starting Support Device By glow plug in combustion chamber
EGR None
Battery 12 V, 65 A·h, equivalent
Charging Alternator 12 V, 480 W
Fuel Diesel Fuel No.2-D (ASTM D975)
Lubricating Oil
Class CF lubricating oil as per API classification is
recommended.
Lubricating Oil Capacity 5.7 L (1.5 US gal)
Weight (Dry) 95 kg (209 lb)
NOTE: the specification described above is of the standard engine of each model.
Conversion Formula: HP = 0.746 kW, PS = 0.7355 kW
51422576 22/01/2018
10.1 [10.001] / 3
11. Engine - Engine and crankcase
Engine - External view
SMIL16MEX0702GB 1
A 497.6 mm (19.59 in)
B 590.1 mm (23.23 in)
C 396.0 mm (15.59 in)
D 185.3 mm (7.30 in)
E ∅125 mm (4.92 in)
F ∅222.2 mm (8.748 in)
51422576 22/01/2018
10.1 [10.001] / 19
12. Engine - Engine and crankcase
Engine - Remove
WARNING
Avoid injury!
Shut off the engine, remove the key, and make sure all machine motion stops before you service the
machine.
Failure to comply could result in death or serious injury.
W1128B
WARNING
Chemical hazard!
Use caution when opening the quick coupler cap from the load port. There may be product left in the
port.
Failure to comply could result in death or serious injury.
W1039A
WARNING
Crushing hazard!
The lifting systems must be operated by qualified personnel who are aware of the correct procedures
to follow. Make sure all lifting equipment is in good condition, and all hooks are equipped with safety
latches.
Failure to comply could result in death or serious injury.
W0256A
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
WARNING
Burn hazard!
Before performing any service on the hydraulic system, you must allow it to cool. Hydraulic fluid
temperature should not exceed 40 °C (104 °F).
Failure to comply could result in death or serious injury.
W0241A
WARNING
Escaping fluid!
Hydraulic fluid or diesel fuel leaking under pressure can penetrate the skin and cause infection or
other injury. To prevent personal injury: Relieve all pressure before disconnecting fluid lines or per-
forming work on the hydraulic system. Before applying pressure, make sure all connections are tight
and all components are in good condition. Never use your hand to check for suspected leaks under
pressure. Use a piece of cardboard or wood for this purpose. If injured by leaking fluid, see your
doctor immediately.
Failure to comply could result in death or serious injury.
W0178A
WARNING
Chemical hazard!
When handling fuel, lubricants, and other service chemicals, follow the manufacturer's instructions.
Wear Personal Protective Equipment (PPE) as instructed. Do not smoke or use open flame. Collect
fluids in proper containers. Obey all local and environmental regulations when disposing of chemi-
cals.
Failure to comply could result in death or serious injury.
W0371A
51422576 22/01/2018
10.1 [10.001] / 20
13. Engine - Engine and crankcase
1. Remove the counterweight (for details refer to Coun-
terweight - Remove (39.140)).
2. Remove the battery (for details refer to Battery - Re-
move (55.302)).
3. Remove the platform (for details refer to Operator seat
base trim panel - Remove - Platform (90.160)).
4. Drain the fuel.
5. Loosen the clamp to remove the hose (1) from the ex-
pansion tank (2).
6. Pull out the expansion tank (2).
7. Use a wrench [ 13 mm] to remove the bolts (4), then
remove the bracket (3).
SMIL16MEX2843AB 1
8. Disconnect the electrical connector CR-24 (3) of the
timer glow.
9. Use a wrench [ 13 mm] to remove the 2 bolts (1).
10. Use a wrench [ 17 mm] to remove the 2 bolts (4), then
remove the bracket (2).
SMIL16MEX2844BB 2
51422576 22/01/2018
10.1 [10.001] / 21
14. Engine - Engine and crankcase
11. Use a wrench [ 13 mm] to remove the 2 bolts (1) of
the coolant filling hose bracket (8).
12. Use a wrench [ 13 mm] to remove the 2 bolts (2) of
the engine oil filling hose bracket (7).
13. Use a wrench [ 13 mm] to remove the 2 bolts (3) of
the bracket (6).
14. Use a wrench [ 13 mm] to remove the 2 bolts (4) of
the battery connect and disconnect switch (5).
SMIL16MEX2845AB 3
15. Use a wrench [ 19 mm] to remove the 2 bolts (2) and
the 2 bolts (3) of the cab support bracket (1).
SMIL16MEX2846AB 4
16. Use a wrench [ 13 mm] to remove the 2 bolts (1) of
the air cleaner inlet hose.
17. Use a wrench [ 19 mm] to remove the 2 bolts (2) of
the cab support bracket (3).
18. Use a wrench [ 13 mm] to remove the 2 bolts (4) of
the cab support bracket (3).
19. Remove the cab support bracket (1).
SMIL16MEX2847AB 5
20. Loosen the clamp (1) to remove the hose (2) from the
radiator.
21. Loosen the clamp (4) to remove the hose (3) from the
cylinder head cover.
22. Remove the coolant filling assembly (5).
SMIL16MEX2848AB 6
51422576 22/01/2018
10.1 [10.001] / 22
15. Engine - Engine and crankcase
23. Loosen the clamp (1) to remove the engine oil filling
assembly (2) from the cylinder head cover.
SMIL16MEX2849AB 7
24. Loosen the clamps and remove the fuel hoses (1) and
(2) from the fuel filter support (3).
SMIL16MEX2850AB 8
25. Loosen the clamp and remove the fuel hose (1) from
the fuel filter water separator (2).
26. Use a wrench [ 17 mm] to remove the bolt (4), and
then disconnect the earth strap (3) from the engine.
SMIL16MEX2851AB 9
27. Cut the tie (1) and disconnect the electrical connector
CD-10 (2) from the air cleaner pressure switch (3).
28. Loosen the clamp (5) to remove the hose (4) from the
intake manifold.
SMIL16MEX2852AB 10
51422576 22/01/2018
10.1 [10.001] / 23
16. Engine - Engine and crankcase
29. Use a wrench [ 17 mm] to remove the bolts (1) with
relative washers and remove the clamps (3) that fix
the electrical cables to the bracket (1).
SMIL17MEX2987AB 11
30. Disconnect the electrical connector CN-145 (6) of the
electrical fuel feed pump (7).
31. Use a wrench [ 13 mm] to remove the bolts (5) of the
bracket (1).
32. Remove the bracket (1) includes air filter (2), fuel filter
(3), fuel filter water separator (4) and feed pump (7).
SMIL16MEX2853BB 12
33. Disconnect the electrical connector CD-8 (2) from the
engine coolant temperature sensor (1).
SMIL16MEX2854AB 13
51422576 22/01/2018
10.1 [10.001] / 24
17. Engine - Engine and crankcase
34. Loosen the clamp (2) and remove the cab heating
hose (1).
SMIL16MEX2855AB 14
35. Loosen the clamp (3) and remove the cab heating
hose (1) from the coolant cock (2).
36. Use a wrench [ 7 mm] to remove the nut (4), and then
disconnect the glows electrical connector CN-80.
SMIL16MEX2856AB 15
37. Disconnect the electrical connector CN-74 (2) from
the alternator (1).
38. Remove the nut (6) to disconnect the wiring CN-74 (3)
from the alternator (1).
39. Remove the nut (4) to disconnect the electrical con-
nector CD-18 from the engine oil pressure switch (5).
SMIL16MEX2857AB 16
40. Loosen the clamp (1) and remove the radiator coolant
hose (2).
SMIL16MEX2868AB 17
51422576 22/01/2018
10.1 [10.001] / 25
18. Engine - Engine and crankcase
41. Disconnect the electrical connector CN-45 (2) from
the starter motor (1).
42. Remove the nut (5) to disconnect the cable (4) and
the wire (3) from the starter motor (1).
SMIL16MEX2858AB 18
43. Use a wrench [ 11 mm] to loosen the clamp (1), and
then remove the hydraulic oil suction hose (2) from the
pump flange (3).
SMIL16MEX2859AB 19
44. Use a wrench [ 19 mm] to remove the T hose (1).
45. Use a wrench [ 24 mm] to remove the P1 hose (3) and
the P2 hose (2).
46. Use a wrench [ 22 mm] to remove the P3 hose (4) and
the P4 hose (5).
SMIL16MEX2860AB 20
47. Disconnect the electrical connector CN-79 (2) from
the fuel solenoid (1).
48. Loosen the clamp and remove the fuel supply hose
(3) from the fuel injection pump (4).
SMIL16MEX2861AB 21
51422576 22/01/2018
10.1 [10.001] / 26
19. Engine - Engine and crankcase
49. Disconnect the electrical connector CD-9 (3) from the
coolant high temperature sensor switch (2).
50. Loosen the clamp and remove the fuel injectors over-
flow hose (1).
SMIL16MEX2862AB 22
51. Use a wrench [ 13 mm] to remove the 2 bolts (2) for
separate the bracket (3) and the hose (4) from the
right-hand support (1).
52. Use a wrench [ 13 mm] to remove the 4 bolts (4), and
then remove the right-hand support (1).
SMIL16MEX2863BB 23
53. Use a wrench [ 19 mm] to loosen the 2 bolts (2) of the
radiator (1).
SMIL16MEX2864AB 24
51422576 22/01/2018
10.1 [10.001] / 27
20. Engine - Engine and crankcase
54. Install the 2 hooks (1) into the engine lift bracket, and
then use the wire rope or chain and lift-crane to secure
the engine.
55. Install the lift strap (3) around the pump (4) and insert
it into the hook (2).
SMIL16MEX2865AB 25
56. Use a box wrench [ 19 mm] to remove the 4 bolts (1).
NOTICE: if necessary, remove the bracket (5) to access to
the bolt (1).
57. Remove the washers (2) .and the silent blocks (3).
SMIL16MEX2866BB 26
51422576 22/01/2018
10.1 [10.001] / 28
21. Engine - Engine and crankcase
58. Tilt the radiator (1) as shown in the figure and by
means of the lift-crane remove the engine.
59. Remove the washers (2) .and the silent blocks (3).
60. Thoroughly check that the location is safe before low-
ering the engine on wood planks, etc.
SMIL16MEX2867BB 27
51422576 22/01/2018
10.1 [10.001] / 29
22. Engine - Engine and crankcase
Engine - Install
WARNING
Avoid injury!
Shut off the engine, remove the key, and make sure all machine motion stops before you service the
machine.
Failure to comply could result in death or serious injury.
W1128B
WARNING
Chemical hazard!
Use caution when opening the quick coupler cap from the load port. There may be product left in the
port.
Failure to comply could result in death or serious injury.
W1039A
WARNING
Crushing hazard!
The lifting systems must be operated by qualified personnel who are aware of the correct procedures
to follow. Make sure all lifting equipment is in good condition, and all hooks are equipped with safety
latches.
Failure to comply could result in death or serious injury.
W0256A
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
WARNING
Burn hazard!
Before performing any service on the hydraulic system, you must allow it to cool. Hydraulic fluid
temperature should not exceed 40 °C (104 °F).
Failure to comply could result in death or serious injury.
W0241A
WARNING
Escaping fluid!
Hydraulic fluid or diesel fuel leaking under pressure can penetrate the skin and cause infection or
other injury. To prevent personal injury: Relieve all pressure before disconnecting fluid lines or per-
forming work on the hydraulic system. Before applying pressure, make sure all connections are tight
and all components are in good condition. Never use your hand to check for suspected leaks under
pressure. Use a piece of cardboard or wood for this purpose. If injured by leaking fluid, see your
doctor immediately.
Failure to comply could result in death or serious injury.
W0178A
WARNING
Chemical hazard!
When handling fuel, lubricants, and other service chemicals, follow the manufacturer's instructions.
Wear Personal Protective Equipment (PPE) as instructed. Do not smoke or use open flame. Collect
fluids in proper containers. Obey all local and environmental regulations when disposing of chemi-
cals.
Failure to comply could result in death or serious injury.
W0371A
51422576 22/01/2018
10.1 [10.001] / 30
23. Engine - Engine and crankcase
NOTICE: For bolts for which the torque is not specified, see
Torque - Standard torque settings () .
1. Install the washers (2) and the silent blocks (3).
2. Tilt the radiator (1) as shown in the figure and by means
of the lift-crane install the engine.
SMIL16MEX2867BB 1
3. Install the silent blocks (3) and the washers (2).
4. Use a box wrench [ 19 mm] to install the bolts (1) and
(4).
5. Tightening torque for bolts (1) installation: 118 –
137 N·m (87 – 101 lb ft)
6. Tightening torque for bolts (4) installation: 118 –
137 N·m (87 – 101 lb ft)
NOTICE: if removed, install the bracket (5).
SMIL16MEX2866BB 2
51422576 22/01/2018
10.1 [10.001] / 31
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Engine - Engine and crankcase
7. Remove the 2 hooks (1) from the engine lift bracket.
8. Remove the lift strap (3) from the hook (2) and the pump
(4).
SMIL16MEX2865AB 3
9. Use a wrench [ 19 mm] to tighten the 2 bolts (2) of the
radiator (1).
Tightening torque for bolts (2) installation: 96.3 –
155.9 N·m (71.0 – 115.0 lb ft)
SMIL16MEX2864AB 4
10. Install the right-hand support (1) and use a wrench [
13 mm] to install the 4 bolts (4).
11. Install the bracket (3) and the hose (4) on the right-
hand support (1).
12. Use a wrench [ 13 mm] to install the 2 bolts (2).
SMIL16MEX2863BB 5
51422576 22/01/2018
10.1 [10.001] / 32
26. Engine - Engine and crankcase
13. Install the fuel injectors overflow hose (1).
14. Connect the electrical connector CD-9 (3) to the
coolant high temperature sensor switch (2).
SMIL16MEX2862AB 6
15. Install the fuel supply hose (3) on the fuel injection
pump (4).
16. Connect the electrical connector CN-79 (2) to the fuel
solenoid (1).
SMIL16MEX2861AB 7
17. Use a wrench [ 24 mm] to install the P1 hose (3) and
the P2 hose (2).
18. Use a wrench [ 19 mm] to install the T hose (1).
19. Use a wrench [ 22 mm] to install the P3 hose (4) and
the P4 hose (5).
SMIL16MEX2860AB 8
20. Install the hydraulic oil suction hose (2) on the pump
flange (3).
21. Use a wrench [ 11 mm] to tighten the clamp (1).
SMIL16MEX2859AB 9
51422576 22/01/2018
10.1 [10.001] / 33
27. Engine - Engine and crankcase
22. Connect the electrical connector CN-45 (2) to the
starter motor (1).
23. Connect the wire (3) and the cable (4) to the starter
motor (1).
24. Install the nut (5).
SMIL16MEX2858AB 10
25. Install the radiator coolant hose (2) and tighten the
clamp (1).
SMIL16MEX2868AB 11
26. Connect the electrical connector CN-74 (2) to the al-
ternator (1).
27. Connect the wiring CN-74 (3) to the alternator (1) and
fix it with the nut (6).
28. Connect the electrical connector CD-18 to the engine
oil pressure switch (5) and fix it with the nut (4).
SMIL16MEX2857AB 12
29. Connect the glows electrical connector CN-80 and
use a wrench [ 7 mm] to fix it with the nut (4).
30. Install the cab heating hose (1) on the coolant cock (2)
and fix it with the clamp (3).
SMIL16MEX2856AB 13
51422576 22/01/2018
10.1 [10.001] / 34
28. Engine - Engine and crankcase
31. Install the cab heating hose (1) and fix it with the clamp
(2).
SMIL16MEX2855AB 14
32. Connect the electrical connector CD-8 (2) on the en-
gine coolant temperature sensor (1).
SMIL16MEX2854AB 15
33. Install the bracket (1) includes air filter (2), fuel filter
(3), fuel filter water separator (4) and feed pump (7).
34. Use a wrench [ 13 mm] to install the bolts (5) of the
bracket (1).
35. Connect the electrical connector CN-145 (6) of the
electrical fuel feed pump (7).
SMIL16MEX2853BB 16
51422576 22/01/2018
10.1 [10.001] / 35