This service manual provides maintenance and repair information for CX250D crawler excavators with Tier 4 Final engines. It includes sections on the engine and its systems, hydraulic systems, frames and ballasting, tracks and suspension, climate control, electrical systems, work equipment, the cab, and fault codes. The manual offers specifications, maintenance procedures, and troubleshooting help for technicians working on these excavators.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...jfjkskekemm
This document provides service information for CX250D Crawler excavators including:
- Specifications and component information for the excavator's engine, cooling system, electrical system, and other systems.
- Sections covering maintenance and repair of engine components like the crankcase, cylinder heads, fuel system, and more.
- Additional chapters related to hydraulics, frames, tracks, climate control, electrical wiring, attachments, cab components, and fault codes.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...fdjjjsekkskemm
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures in the manual. The manufacturer will not be responsible for damages caused by unapproved parts or components.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...fjjskekfsem
This document is a service manual that provides specifications and repair instructions for the engine and related components of Case CX250D crawler excavators. It includes detailed sections on the engine and crankcase, cooling system, fuel system, electrical system, lubrication system, and exhaust system. The manual aims to guide qualified service personnel on maintenance, repairs, and component replacements according to the manufacturer's guidelines.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...gongyi2122252
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Each section includes subsections for specific components and systems. The manual provides repair and maintenance instructions that should only be performed by qualified dealership personnel using the recommended special tools.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...sang1818141471
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures in the manual. The manufacturer will not be responsible for damages caused by unapproved parts or components.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...naoji181714047
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures and special tools described. The manufacturer will not be responsible for damages caused by unapproved parts or components used in servicing or repairs.
CASE CX250D, CX250D Long Reach LC Version Tier 4B (final) Crawler Excavator S...fujsekdmmdm
This document is a service manual that provides specifications and repair instructions for CX250D crawler excavators. It contains sections on the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, platform, cab bodywork and decals. The engine section provides detailed specifications and component level repair instructions for the excavator's engine, including the crankcase, cylinder heads, fuel system, cooling system, lubrication system and electrical charging and starting systems.
Case cx350 d lc version tier 4b (final) crawler excavator service repair manualfjjskekfsem
This document provides specifications for the engine in a CX350D crawler excavator, including:
- The engine is a 6-cylinder inline diesel engine with a displacement of 7.79L and compression ratio of 16.3.
- Cooling is provided by a water cooling system with a thermostat that opens at 82-100°C depending on the type.
- Lubrication is provided by a compression type oil pump system with an oil capacity of 36-46L.
- Fuel is delivered by an electronic common rail injection system with multi-hole injector nozzles.
- Electrical systems include a 24-90V AC generator and 24V starter motor.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...jfjkskekemm
This document provides service information for CX250D Crawler excavators including:
- Specifications and component information for the excavator's engine, cooling system, electrical system, and other systems.
- Sections covering maintenance and repair of engine components like the crankcase, cylinder heads, fuel system, and more.
- Additional chapters related to hydraulics, frames, tracks, climate control, electrical wiring, attachments, cab components, and fault codes.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...fdjjjsekkskemm
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures in the manual. The manufacturer will not be responsible for damages caused by unapproved parts or components.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...fjjskekfsem
This document is a service manual that provides specifications and repair instructions for the engine and related components of Case CX250D crawler excavators. It includes detailed sections on the engine and crankcase, cooling system, fuel system, electrical system, lubrication system, and exhaust system. The manual aims to guide qualified service personnel on maintenance, repairs, and component replacements according to the manufacturer's guidelines.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...gongyi2122252
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Each section includes subsections for specific components and systems. The manual provides repair and maintenance instructions that should only be performed by qualified dealership personnel using the recommended special tools.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...sang1818141471
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures in the manual. The manufacturer will not be responsible for damages caused by unapproved parts or components.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...naoji181714047
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures and special tools described. The manufacturer will not be responsible for damages caused by unapproved parts or components used in servicing or repairs.
CASE CX250D, CX250D Long Reach LC Version Tier 4B (final) Crawler Excavator S...fujsekdmmdm
This document is a service manual that provides specifications and repair instructions for CX250D crawler excavators. It contains sections on the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, platform, cab bodywork and decals. The engine section provides detailed specifications and component level repair instructions for the excavator's engine, including the crankcase, cylinder heads, fuel system, cooling system, lubrication system and electrical charging and starting systems.
Case cx350 d lc version tier 4b (final) crawler excavator service repair manualfjjskekfsem
This document provides specifications for the engine in a CX350D crawler excavator, including:
- The engine is a 6-cylinder inline diesel engine with a displacement of 7.79L and compression ratio of 16.3.
- Cooling is provided by a water cooling system with a thermostat that opens at 82-100°C depending on the type.
- Lubrication is provided by a compression type oil pump system with an oil capacity of 36-46L.
- Fuel is delivered by an electronic common rail injection system with multi-hole injector nozzles.
- Electrical systems include a 24-90V AC generator and 24V starter motor.
Case cx350 d lc version tier 4b (final) crawler excavator service repair manualjfjkskekemm
This document provides specifications for the 6HK1 engine used in CX350D crawler excavators, including:
- The engine has 6 cylinders and is water cooled, with a displacement of 7.79L
- The cooling system includes a centrifugal water pump and wax pellet thermostat, with thermostat valve opening temperatures ranging from 76-100 degrees Celsius
- The electrical system includes a 24-90V AC generator and 24V 5kW reduction starter
Case cx350 d lc version tier 4b (final) crawler excavator service repair manualfdjjjsekkskemm
This document is a service manual for the CX350D Crawler Excavator. It contains sections covering the engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. Repair and maintenance work should only be performed by qualified dealership personnel using the instructions and special tools provided. The manufacturer will not be responsible for damages caused by unauthorized parts or repairs.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...fjjskekksemmm
This document is a service manual that provides specifications and repair/maintenance instructions for CX210D crawler excavators. It includes sections on the engine and related systems, hydraulic systems, frames and ballasting, tracks and suspensions, cab climate control, electrical systems, work equipment, platform/cab components, and fault codes. The document contains detailed part numbers, diagrams, specifications, and repair steps to guide maintenance and repairs of the excavators.
Case cx210 d crawler excavator service repair manualfjjskekksemmm
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual instructs only qualified dealership personnel to perform repairs, using special tools whenever possible. It warns that the manufacturer is not responsible for damages caused by unapproved replacement parts.
Case cx210 d long reach lc long reach (tier4 final) crawler excavator service...ufjjsjdkkskem
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...dfujsjefjkskemm
This document is a service manual for CX210D Crawler excavators. It provides part numbers, specifications, and repair/maintenance instructions for the engine, hydraulic systems, frames/ballasting, tracks/suspension, climate control, electrical systems, attachments, cab/bodywork, and fault codes. The manual includes an introduction and table of contents to guide users to the relevant sections.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...ufjsekksmemm
This document is a service manual for CX210D Crawler excavators. It provides part numbers, specifications, and repair/maintenance instructions for the engine, hydraulic systems, frames/ballasting, tracks/suspension, climate control, electrical systems, attachments, cab/bodywork, and fault codes. The manual includes an introduction and detailed sections for the engine systems, including the crankcase, cylinder heads, fuel system, cooling system, lubrication system, and electrical components.
CASE IH Farmall 75C Efficient Power - Tractor Service Repair Manual Instant D...sang1818141471
This document provides safety guidelines for working on farm equipment. It emphasizes turning off and relieving pressure from systems before working, wearing proper protective equipment, using lifting and support devices appropriately, and taking precautions with fuels, electricity, moving parts, slopes, and ventilation. Following basic safety rules is important to avoid accidents.
CASE IH Farmall 65C Efficient Power - Tractor Service Repair Manual Instant D...sang1818141471
This document is a service manual that contains information on systems for Farmall 55C, 65C, and 75C tractors, including the engine, transmission, axles, hydraulics, steering, brakes, hitches, and electrical systems. It provides an overview and breakdown of components and subsystems with references to specific section numbers for more detailed information.
CASE IH Farmall 55C Efficient Power - Tractor Service Repair Manual Instant D...sang1818141471
This document is a service manual that contains information on systems for Farmall 55C, 65C, and 75C tractors, including the engine, transmission, axles, hydraulics, steering, brakes, hitches, and electrical systems. It provides an overview and breakdown of components and subsystems with references to specific section numbers for more detailed information.
CASE IH AXIAL-FLOW AF9120 Combines Service Repair Manual Instant Download (Y8...sang1818141471
This document is a service manual for axial-flow combine harvesters models 7120, 8120, and 9120. It contains information on power production systems like the engine, fuel system, and cooling system. It also contains information on power train systems like the transmission, axles, and steering. Additional sections cover travelling, crop processing, protection systems, and the body and structure of the harvesters. The manual is intended to be used by qualified service technicians and contains technical specifications, diagrams, removal and installation instructions to aid in maintenance and repairs.
CASE IH AXIAL-FLOW AF8120 Combines Service Repair Manual Instant Download (Y8...sang1818141471
This document is a service manual for axial-flow combine harvesters models 7120, 8120, and 9120. It contains information on power production systems like the engine, fuel system, and cooling system. It also contains information on power train systems like the transmission, axles, and steering. Additional sections cover traveling systems, crop processing systems, protection systems, and the body and structure of the harvesters. The manual is intended to be used by qualified service technicians and contains technical specifications, diagrams, removal and installation instructions to aid in maintenance and repairs.
CASE IH AXIAL-FLOW AF7120 Combines Service Repair Manual Instant Download (Y8...sang1818141471
This document is a service manual for axial-flow combine harvesters models 7120, 8120, and 9120. It contains sections covering the combine harvester's various systems and components, including distribution systems, hydraulic and electrical power systems, the engine, transmission, steering, brakes, wheels and tracks, operator controls, grain handling, cleaning and residue systems, and protection systems. The manual provides technical information, specifications, diagrams and instructions to assist with maintenance and repairs.
CASE IH 420 Cotton Picker Service Repair Manual Instant Download.pdfsang1818141471
This document provides service information for removing and installing the engine on a Case IH 420 Cotton Express cotton picker. It outlines the necessary special tools, describes how to raise the cotton basket if needed to access the engine, and provides step-by-step instructions for removing and installing the engine safely. Safety precautions are emphasized, and all removed hardware should be retained for reinstallation.
CASE CX260C Crawler Excavator Service Repair Manual Instant Download.pdfsang1818141471
This document provides an overview and table of contents for the service manual of a CX260C Crawler Excavator. The manual contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals of the excavator. Safety rules are outlined emphasizing the importance of qualified personnel strictly following instructions and using special tools when performing repairs or maintenance.
CASE CX250D Crawler Excavator Service Repair Manual Instant Download.pdfsang1818141471
This document is a service manual for CX250D crawler excavators. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work must only be done by qualified dealership personnel using the proper tools and procedures. Liability is disclaimed for damages caused by unapproved parts or improper servicing.
CASE 3550 Crawler Dozer Service Repair Manual Instant Download.pdfsang1818141471
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 1455B Crawler Dozer Service Repair Manual Instant Download.pdfsang1818141471
This document provides an overview of engine diagnosis for technicians. It explains that there are three main requirements for an engine to start and run properly: fuel, compression, and ignition. Any issues with these systems can cause problems. Fuel system issues may occur anywhere from the tank to the injection pump and injectors. Compression relies on proper air intake, valve operation, cylinder components, and camshaft timing. Ignition results from adequate compression generating enough heat to ignite injected fuel, requiring proper injection pump and injector operation. The following pages detail many trouble symptoms, causes, and necessary repairs.
CASE 1450B Crawler Dozer Service Repair Manual Instant Download.pdfsang1818141471
This document provides a table of contents and service manual for 1450B and 1455B crawler loaders and dozers. The table of contents lists various sections covering general engine specifications, maintenance, systems like fuel, electrical, hydraulic, and mounted equipment. Section 1010 then provides specific general engine specifications for the 504 BDT diesel engine used in the 1450B crawler, including that it is a 6 cylinder, 4 stroke turbocharged engine with a 504 cubic inch displacement.
CASE 1150M Tier 4A (interim) Crawler Dozer Service Repair Manual Instant Down...sang1818141471
This document is a service manual for the 1150M Crawler Dozer that provides information on maintenance and repair procedures. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspensions, cab climate control, electrical systems, dozer blade and arm, and the platform, cab and bodywork. Specification information such as torque values, maintenance charts, and fluid capacities are also provided.
CASE 1150M Tier 4A (interim) Crawler Dozer Service Repair Manual Instant Down...sang1818141471
This document is a service manual for the 1150M Crawler Dozer that provides information on maintenance and repair procedures. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, and platform/cab. Specification information is also provided such as torque values, maintenance charts, fluid capacities, and product identification numbers.
CASE 1150M Tier 4A (interim) Crawler Dozer Service Repair Manual Instant Down...sang1818141471
This document is a service manual for the 1150M Crawler Dozer that provides information on maintenance, repair, and specifications. It includes sections on the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspensions, cab climate control, electrical systems, dozer blade and arm, platform and bodywork, and introduction/general information. The introduction section outlines safety rules, torque specifications, maintenance charts, and other basic instructions for working on the machine.
More Related Content
Similar to CASE CX250D Long Reach Crawler Excavator Service Repair Manual Instant Download.pdf
Case cx350 d lc version tier 4b (final) crawler excavator service repair manualjfjkskekemm
This document provides specifications for the 6HK1 engine used in CX350D crawler excavators, including:
- The engine has 6 cylinders and is water cooled, with a displacement of 7.79L
- The cooling system includes a centrifugal water pump and wax pellet thermostat, with thermostat valve opening temperatures ranging from 76-100 degrees Celsius
- The electrical system includes a 24-90V AC generator and 24V 5kW reduction starter
Case cx350 d lc version tier 4b (final) crawler excavator service repair manualfdjjjsekkskemm
This document is a service manual for the CX350D Crawler Excavator. It contains sections covering the engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. Repair and maintenance work should only be performed by qualified dealership personnel using the instructions and special tools provided. The manufacturer will not be responsible for damages caused by unauthorized parts or repairs.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...fjjskekksemmm
This document is a service manual that provides specifications and repair/maintenance instructions for CX210D crawler excavators. It includes sections on the engine and related systems, hydraulic systems, frames and ballasting, tracks and suspensions, cab climate control, electrical systems, work equipment, platform/cab components, and fault codes. The document contains detailed part numbers, diagrams, specifications, and repair steps to guide maintenance and repairs of the excavators.
Case cx210 d crawler excavator service repair manualfjjskekksemmm
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual instructs only qualified dealership personnel to perform repairs, using special tools whenever possible. It warns that the manufacturer is not responsible for damages caused by unapproved replacement parts.
Case cx210 d long reach lc long reach (tier4 final) crawler excavator service...ufjjsjdkkskem
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...dfujsjefjkskemm
This document is a service manual for CX210D Crawler excavators. It provides part numbers, specifications, and repair/maintenance instructions for the engine, hydraulic systems, frames/ballasting, tracks/suspension, climate control, electrical systems, attachments, cab/bodywork, and fault codes. The manual includes an introduction and table of contents to guide users to the relevant sections.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...ufjsekksmemm
This document is a service manual for CX210D Crawler excavators. It provides part numbers, specifications, and repair/maintenance instructions for the engine, hydraulic systems, frames/ballasting, tracks/suspension, climate control, electrical systems, attachments, cab/bodywork, and fault codes. The manual includes an introduction and detailed sections for the engine systems, including the crankcase, cylinder heads, fuel system, cooling system, lubrication system, and electrical components.
Similar to CASE CX250D Long Reach Crawler Excavator Service Repair Manual Instant Download.pdf (7)
CASE IH Farmall 75C Efficient Power - Tractor Service Repair Manual Instant D...sang1818141471
This document provides safety guidelines for working on farm equipment. It emphasizes turning off and relieving pressure from systems before working, wearing proper protective equipment, using lifting and support devices appropriately, and taking precautions with fuels, electricity, moving parts, slopes, and ventilation. Following basic safety rules is important to avoid accidents.
CASE IH Farmall 65C Efficient Power - Tractor Service Repair Manual Instant D...sang1818141471
This document is a service manual that contains information on systems for Farmall 55C, 65C, and 75C tractors, including the engine, transmission, axles, hydraulics, steering, brakes, hitches, and electrical systems. It provides an overview and breakdown of components and subsystems with references to specific section numbers for more detailed information.
CASE IH Farmall 55C Efficient Power - Tractor Service Repair Manual Instant D...sang1818141471
This document is a service manual that contains information on systems for Farmall 55C, 65C, and 75C tractors, including the engine, transmission, axles, hydraulics, steering, brakes, hitches, and electrical systems. It provides an overview and breakdown of components and subsystems with references to specific section numbers for more detailed information.
CASE IH AXIAL-FLOW AF9120 Combines Service Repair Manual Instant Download (Y8...sang1818141471
This document is a service manual for axial-flow combine harvesters models 7120, 8120, and 9120. It contains information on power production systems like the engine, fuel system, and cooling system. It also contains information on power train systems like the transmission, axles, and steering. Additional sections cover travelling, crop processing, protection systems, and the body and structure of the harvesters. The manual is intended to be used by qualified service technicians and contains technical specifications, diagrams, removal and installation instructions to aid in maintenance and repairs.
CASE IH AXIAL-FLOW AF8120 Combines Service Repair Manual Instant Download (Y8...sang1818141471
This document is a service manual for axial-flow combine harvesters models 7120, 8120, and 9120. It contains information on power production systems like the engine, fuel system, and cooling system. It also contains information on power train systems like the transmission, axles, and steering. Additional sections cover traveling systems, crop processing systems, protection systems, and the body and structure of the harvesters. The manual is intended to be used by qualified service technicians and contains technical specifications, diagrams, removal and installation instructions to aid in maintenance and repairs.
CASE IH AXIAL-FLOW AF7120 Combines Service Repair Manual Instant Download (Y8...sang1818141471
This document is a service manual for axial-flow combine harvesters models 7120, 8120, and 9120. It contains sections covering the combine harvester's various systems and components, including distribution systems, hydraulic and electrical power systems, the engine, transmission, steering, brakes, wheels and tracks, operator controls, grain handling, cleaning and residue systems, and protection systems. The manual provides technical information, specifications, diagrams and instructions to assist with maintenance and repairs.
CASE IH 420 Cotton Picker Service Repair Manual Instant Download.pdfsang1818141471
This document provides service information for removing and installing the engine on a Case IH 420 Cotton Express cotton picker. It outlines the necessary special tools, describes how to raise the cotton basket if needed to access the engine, and provides step-by-step instructions for removing and installing the engine safely. Safety precautions are emphasized, and all removed hardware should be retained for reinstallation.
CASE CX260C Crawler Excavator Service Repair Manual Instant Download.pdfsang1818141471
This document provides an overview and table of contents for the service manual of a CX260C Crawler Excavator. The manual contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals of the excavator. Safety rules are outlined emphasizing the importance of qualified personnel strictly following instructions and using special tools when performing repairs or maintenance.
CASE CX250D Crawler Excavator Service Repair Manual Instant Download.pdfsang1818141471
This document is a service manual for CX250D crawler excavators. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work must only be done by qualified dealership personnel using the proper tools and procedures. Liability is disclaimed for damages caused by unapproved parts or improper servicing.
CASE 3550 Crawler Dozer Service Repair Manual Instant Download.pdfsang1818141471
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 1455B Crawler Dozer Service Repair Manual Instant Download.pdfsang1818141471
This document provides an overview of engine diagnosis for technicians. It explains that there are three main requirements for an engine to start and run properly: fuel, compression, and ignition. Any issues with these systems can cause problems. Fuel system issues may occur anywhere from the tank to the injection pump and injectors. Compression relies on proper air intake, valve operation, cylinder components, and camshaft timing. Ignition results from adequate compression generating enough heat to ignite injected fuel, requiring proper injection pump and injector operation. The following pages detail many trouble symptoms, causes, and necessary repairs.
CASE 1450B Crawler Dozer Service Repair Manual Instant Download.pdfsang1818141471
This document provides a table of contents and service manual for 1450B and 1455B crawler loaders and dozers. The table of contents lists various sections covering general engine specifications, maintenance, systems like fuel, electrical, hydraulic, and mounted equipment. Section 1010 then provides specific general engine specifications for the 504 BDT diesel engine used in the 1450B crawler, including that it is a 6 cylinder, 4 stroke turbocharged engine with a 504 cubic inch displacement.
CASE 1150M Tier 4A (interim) Crawler Dozer Service Repair Manual Instant Down...sang1818141471
This document is a service manual for the 1150M Crawler Dozer that provides information on maintenance and repair procedures. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspensions, cab climate control, electrical systems, dozer blade and arm, and the platform, cab and bodywork. Specification information such as torque values, maintenance charts, and fluid capacities are also provided.
CASE 1150M Tier 4A (interim) Crawler Dozer Service Repair Manual Instant Down...sang1818141471
This document is a service manual for the 1150M Crawler Dozer that provides information on maintenance and repair procedures. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, and platform/cab. Specification information is also provided such as torque values, maintenance charts, fluid capacities, and product identification numbers.
CASE 1150M Tier 4A (interim) Crawler Dozer Service Repair Manual Instant Down...sang1818141471
This document is a service manual for the 1150M Crawler Dozer that provides information on maintenance, repair, and specifications. It includes sections on the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspensions, cab climate control, electrical systems, dozer blade and arm, platform and bodywork, and introduction/general information. The introduction section outlines safety rules, torque specifications, maintenance charts, and other basic instructions for working on the machine.
CASE 1150M Tier 4A (interim) Crawler Dozer Service Repair Manual Instant Down...sang1818141471
This document is a service manual for the 1150M Crawler Dozer that provides information on maintenance and repair procedures. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspensions, cab climate control, electrical systems, dozer blade and arm, and platform/cab. Specification information is also provided such as torque values, maintenance charts, fluid capacities, and product identification numbers.
CASE 1150M Tier 4A (interim) Crawler Dozer Service Repair Manual Instant Down...sang1818141471
This document is a service manual for the 1150M Crawler Dozer that provides information on maintenance and repair procedures. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspensions, cab climate control, electrical systems, dozer blade and arm, and the platform, cab and bodywork. Specification information such as torque values, fluid capacities and product identification numbers are also provided.
CASE 1150L Crawler Dozer Service Repair Manual Instant Download.pdfsang1818141471
This service manual provides information on servicing the 1150L XLT crawler dozer. It contains sections covering the engine, rear axle system, hydrostatic drive, brakes and controls, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, and the platform, cab, bodywork, and decals. The manual is intended for use by qualified dealership personnel and contains repair and maintenance procedures along with specifications and diagnostic information.
CASE 885B 885B DHP 885B AWD Motor Grader Service Repair Manual Instant Down...sang1818141471
This document provides technical specifications and descriptions of components for 667TA engines, including the engine block, crankshaft, connecting rod, piston, and camshaft. It describes the main features of each component as well as their functions within the engine. It also provides diagrams to illustrate the components.
CASE 865B 865B VHP 865B AWD Motor Grader Service Repair Manual Instant Down...sang1818141471
This document provides technical specifications and descriptions of components for 667TA engines, including the engine block, crankshaft, connecting rod, piston, and camshaft. It describes the main features of each component as well as their functions within the engine. It also provides diagrams to illustrate the components.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. SERVICE MANUAL
CX250D Crawler excavators LC version (TIER4 FINAL) - EU Market
CX250D Crawler excavators NLC version (TIER4 FINAL) - EU Market
CX250D Long Reach Crawler excavators LC Long Reach (TIER4 FINAL)
- EU Market
47843013 21/05/2015
EN
3. Contents
INTRODUCTION
Engine....................................................................................... 10
[10.001] Engine and crankcase ............................................................. 10.1
[10.102] Pan and covers .................................................................... 10.2
[10.106] Valve drive and gears .............................................................. 10.3
[10.101] Cylinder heads ..................................................................... 10.4
[10.105] Connecting rods and pistons....................................................... 10.5
[10.103] Crankshaft and flywheel............................................................ 10.6
[10.216] Fuel tanks .......................................................................... 10.7
[10.206] Fuel filters .......................................................................... 10.8
[10.218] Fuel injection system............................................................... 10.9
[10.202] Air cleaners and lines ............................................................ 10.10
[10.250] Turbocharger and lines........................................................... 10.11
[10.254] Intake and exhaust manifolds and muffler ....................................... 10.12
[10.500] Selective Catalytic Reduction (SCR) exhaust treatment ......................... 10.13
[10.501] Exhaust Gas Recirculation (EGR) - Diesel Particulate Filter (DPF) exhaust
treatment .................................................................................. 10.14
[10.400] Engine cooling system ........................................................... 10.15
[10.414] Fan and drive .................................................................... 10.16
[10.310] Aftercooler........................................................................ 10.17
[10.304] Engine lubrication system........................................................ 10.18
Hydraulic systems....................................................................... 35
[35.000] Hydraulic systems.................................................................. 35.1
[35.300] Reservoir, cooler, and filters........................................................ 35.2
[35.106] Variable displacement pump ....................................................... 35.3
[35.102] Pump control valves................................................................ 35.4
[35.359] Main control valve.................................................................. 35.5
47843013 21/05/2015
4. [35.357] Pilot system ........................................................................ 35.6
[35.355] Hydraulic hand control ............................................................. 35.7
[35.356] Hydraulic foot control............................................................... 35.8
[35.352] Hydraulic swing system ............................................................ 35.9
[35.353] Hydraulic travel system .......................................................... 35.10
[35.354] Hydraulic central joint ............................................................ 35.11
[35.736] Boom hydraulic system .......................................................... 35.12
[35.737] Dipper hydraulic system.......................................................... 35.13
[35.738] Excavator and backhoe bucket hydraulic system................................ 35.14
[35.360] Hammer and rotating bucket hydraulic system .................................. 35.15
Frames and ballasting ................................................................. 39
[39.140] Ballasts and supports .............................................................. 39.1
Tracks and track suspension........................................................ 48
[48.130] Track frame and driving wheels .................................................... 48.1
[48.100] Tracks .............................................................................. 48.2
[48.134] Track tension units ................................................................. 48.3
[48.138] Track rollers ........................................................................ 48.4
Cab climate control ..................................................................... 50
[50.100] Heating ............................................................................. 50.1
[50.200] Air conditioning..................................................................... 50.2
Electrical systems....................................................................... 55
[55.000] Electrical system ................................................................... 55.1
[55.100] Harnesses and connectors......................................................... 55.2
[55.525] Cab engine controls................................................................ 55.3
[55.015] Engine control system.............................................................. 55.4
[55.201] Engine starting system ............................................................. 55.5
[55.301] Alternator........................................................................... 55.6
[55.302] Battery.............................................................................. 55.7
47843013 21/05/2015
5. [55.202] Cold start aid ....................................................................... 55.8
[55.011] Fuel tank system ................................................................... 55.9
[55.010] Fuel injection system............................................................. 55.10
[55.014] Engine intake and exhaust system............................................... 55.11
[55.988] Selective Catalytic Reduction (SCR) electrical system .......................... 55.12
[55.989] Exhaust Gas Recirculation (EGR) electrical system ............................. 55.13
[55.012] Engine cooling system ........................................................... 55.14
[55.013] Engine oil system ................................................................ 55.15
[55.640] Electronic modules ............................................................... 55.16
[55.512] Cab controls...................................................................... 55.17
[55.036] Hydraulic system control ......................................................... 55.18
[55.051] Cab Heating, Ventilation, and Air-Conditioning (HVAC) controls................. 55.19
[55.050] Heating, Ventilation, and Air-Conditioning (HVAC) control system............... 55.20
[55.524] Cab controls (Lift arm, Boom, Dipper, Bucket) ................................... 55.21
[55.416] Swing control system ............................................................ 55.22
[55.417] Travel control system ............................................................ 55.23
[55.530] Camera........................................................................... 55.24
[55.518] Wiper and washer system........................................................ 55.25
[55.404] External lighting .................................................................. 55.26
[55.514] Cab lighting ...................................................................... 55.27
[55.408] Warning indicators, alarms, and instruments .................................... 55.28
[55.992] Anti-theft system ................................................................. 55.29
[55.DTC] FAULT CODES.................................................................. 55.30
Booms, dippers, and buckets ....................................................... 84
[84.910] Boom ............................................................................... 84.1
[84.912] Dipper arm ......................................................................... 84.2
[84.100] Bucket.............................................................................. 84.3
Platform, cab, bodywork, and decals............................................. 90
[90.150] Cab................................................................................. 90.1
47843013 21/05/2015
8. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE CONSTRUCTION Sales and Service Networks.
47843013 21/05/2015
3
9. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47843013 21/05/2015
4
10. INTRODUCTION
Safety rules – General information
Cleaning
Clean the metal parts with cleaning solution that meets the standard and steam cleaning. (except for bearings)
After cleaning, dry well, and inject oil in all parts.
Also inject oil into the bearings after drying.
Inspection
When disassembling parts, check all the parts.
If there are any worn or damaged parts, replace them.
Inspect carefully to prevent initial breakdowns.
Bearing
Replace any loose bearings.
Air dry bearings before installing them.
Needle bearing
When inserting needle bearings, be very careful not to damage them.
Apply grease to the section where the needle bearing will be inserted.
Gear
Check that there is no wear and no damage.
Oil seal, O-ring, gasket
Always install new oil seals, O-rings, and gaskets.
Apply grease to sections where oil seals and O-rings will be inserted.
Shaft
Check that there is no wear and no damage.
Check the bearings and check for damaged oil seals on the shaft.
Service parts
Install CASE CONSTRUCTION genuine service parts.
When placing an order, check the parts catalog. It contains the CASE CONSTRUCTION genuine part numbers.
Any breakdowns arising from the installation of non-genuine parts are not covered by the warranty.
Lubricants (fuel, hydraulic oil)
Use the oil from the specified company or specified in the operator's manual or service Manual.
Any breakdowns arising from any fuel or hydraulic oil other than those specified are not covered by the warranty.
47843013 21/05/2015
5
11. SERVICE MANUAL
Engine
CX250D Crawler excavators LC version (TIER4 FINAL) - EU Market
CX250D Crawler excavators NLC version (TIER4 FINAL) - EU Market
CX250D Long Reach Crawler excavators LC Long Reach (TIER4 FINAL)
- EU Market
47843013 21/05/2015
10
12. Engine - Engine and crankcase
Engine - General specification
Engine main specifications
Item Engine model 4HK1
Type
Diesel/4-cycle/water-cooled, inline 4 cylinder
OHC
Shape of combustion chamber Direct injection type
Cylinder liner type Dry type
Cylinder bore x stroke 115 mm (4.53 in) x 125 mm (4.92 in)
Displacement 5.193 L (317 in³)
Compression ratio 16.5
Compression pressure 3.23 MPa (469 psi) 200 RPM
Idling speed 800 RPM
Intake 0.4 mm (0.016 in) While cool
Valve clearance
Exhaust 0.4 mm (0.016 in) While cool
Ignition method Compression ignition
Injection order 1, 3, 4, 2
Lubrication system
Lubrication type Compression type
Oil pump type Gear type
Lubrication oil amount 19.5 - 27 L (5.2 - 7.1 US gal)
Oil filter type
Full-flow/partial flow integrated filter (Cartridge
type)
Oil cooling type Built-in type, water cooling
Cooling system
Cooling type Water cooling
Radiator type Corrugated fin (Pressure type)
Water pump type Centrifugal type, belt type
Thermostat type 2-wax type unit
76.5 °C (170 °F) With jiggle valve
Type 1
82 °C (180 °F) Without jiggle valve
85 °C (185 °F) With jiggle valve
Thermostat valve open valve
temperature
Type 2
82 °C (180 °F) Without jiggle valve
Coolant capacity 14.5 L (3.8 US gal)
Fuel system
Injection pump type Electronic control common rail (fuel rail) type
Governor type Electronic type
Timer type Electronic type
Injection nozzle type
Multi-hole type 7 holes, inner diameter Ø
0.14 mm (0.0055 in)
Charging system
Generator type AC type
Output 24 V 50 A
Regulator type IC
Starter system
Starter type Reduction type
Output 24 V 5.0 kW
Preheat system type Glow plug
Glow plug standard voltage/current 23 V 3.5 A
47843013 21/05/2015
10.1 [10.001] / 3
13. Engine - Engine and crankcase
Cooling system main specifications
Item Specifications
Water pump Centrifugal impeller method
Pulley ratio 0.85
Thermostat Wax pellet type
90 °C (194 °F) With jiggle valve
Type 1
95 °C (203 °F) Without jiggle valve
100 °C (212 °F) With jiggle valve
Full open temperature
Type 2
95 °C (203 °F) Without jiggle valve
Electrical system main specifications
Generator
Item Data
Isuzu parts number 8980921161
Nominal output 24 V/ 50 A
Rated speed 5000 RPM
Regulator type IC type
Regulated voltage 27.5 - 29.5 V
Weight 9.5 kg (20.9 lb)
Starter
Type (Manufacturer) Nikko
Voltage 24 V
Output 5 kW (6.8 Hp)
Rated
Time 30 s
No. of pinion gears 13
Direction of rotation (toward pinion) Clockwise
Weight (approx.) 8.0 kg (17.6 lb)
Current/voltage 85 A or less/ 24 V
No-load characteristics
Speed 3300 RPM or more
Current/voltage 400 A/ 18.5 V
Torque 28.4 N·m (20.95 lb ft) or more
Load characteristics
Speed 1250 RPM or more
Current/voltage 1400 A or less/ 9 V
Locking characteristics
Torque 88.2 N·m (65.05 lb ft) or more
47843013 21/05/2015
10.1 [10.001] / 4
14. Engine - Engine and crankcase
Engine - Identification
Engine number
SMIL13CEX1711GB 1
1. Engine number stamping
47843013 21/05/2015
10.1 [10.001] / 5
15. Engine - Engine and crankcase
Engine - Static description
The control provided by the control unit applies to the range from injection to air intake and exhaust, including fuel
injection quantity, injection timing, air intake restriction, EGR, and idling speed.
Cylinder block
The cylinder block is made of cast iron, and it has an equal center distance for each bore and a high rigidity, and the
center of the crankshaft matches the center of the block. Tighten the bearing cap using the plastic region rotational
angle tightening method with the ladder frame structure.
Cylinder liner
A cylinder liner that matches with the cylinder block bore inner diameter is selected, and the identification number is
stamped on the left side of the cylinder.
Piston
The piston is a strut cast autothermatic piston made of aluminum alloy, and the combustion chamber is the round
re-entrant type.
Cylinder head
The cylinder head is made of cast iron and has four valves per cylinder. The angle tightening method has been
adopted for the cylinder head bolt to further improve its reliability and durability.
Crankshaft
The crankshaft uses tufftrided steel, and each of the journal diameter grades are marked on the No. 1 balance weight.
EGR system
The EGR system is controlled by the engine control module (ECM) according to various data, including the water
temperature, engine speed, and engine load, to recirculate the exhaust gas for purification. The primary components
are the EGR valve, EGR cooler, and various sensors.
Connecting rod cap bolt
The angle tightening method has been adopted for the connecting rod cap bolt to further improve its reliability and
durability.
Common rail (fuel rail) type electronic control injection system
The common rail (fuel rail) type electronic control injection system consists of the fuel supply pump that sets the target
pressure of the high pressure fuel to supply the fuel, the common rail (fuel rail) that measures the high-pressure fuel,
and the fuel injector that injects the fuel in the form of a fine mist. Each of these is controlled by the ECM based on
various signals that control the injection timing and injection quantity in accordance with driving conditions.
Fuel injector
The fuel injector has adopted the 7- hole nozzle, and adjusts the fuel injection quantity and injection timing by opening
or closing the electromagnetic valve on the injector head portion.
The ECM corrects variations in the fuel injection quantity between fuel injectors in accordance with the ID code data
in the memory. When adjusting the fuel injector, the ID code data must be recorded in the ECM.
Fuel filter with sedimenter
The fuel filter with sedimenter removes water by using the difference in the specific gravity of diesel oil and water, and
notifies the operator through the indicator when it becomes full of water.
47843013 21/05/2015
10.1 [10.001] / 8
16. Engine - Engine and crankcase
Preheat system
The preheat system consists of the ECM, glow relay, glow plug, and glow indicator light. The preheat system is
activated when the engine coolant temperature is low so as to help the engine start.
Lubricating system
An oil filter with a full-flow bypass is used, and the pistons are cooled down using the water-cooled oil cooler and the
oil jet.
47843013 21/05/2015
10.1 [10.001] / 9
17. Engine - Engine and crankcase
Engine - Prepare
WARNING
Escaping fluid!
Hydraulic fluid or diesel fuel leaking under pressure can penetrate the skin and cause infection or
other injury. To prevent personal injury: Relieve all pressure before disconnecting fluid lines or per-
forming work on the hydraulic system. Before applying pressure, make sure all connections are tight
and all components are in good condition. Never use your hand to check for suspected leaks under
pressure. Use a piece of cardboard or wood for this purpose. If injured by leaking fluid, see your
doctor immediately.
Failure to comply could result in death or serious injury.
W0178A
WARNING
Avoid injury!
Shut off the engine, remove the key, and make sure all motion is stopped before servicing the machine.
Failure to comply could result in death or serious injury.
W1128A
WARNING
Crushing hazard!
The lifting systems must be operated by qualified personnel who are aware of the correct procedures
to follow. Make sure all lifting equipment is in good condition, and all hooks are equipped with safety
latches.
Failure to comply could result in death or serious injury.
W0256A
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
WARNING
Explosion hazard!
Batteries emit explosive gases. Always ventilate when using in an enclosed area or when charging.
Keep the battery away from sparks, open flames, and other ignition sources.
Failure to comply could result in death or serious injury.
W0369A
NOTICE: Keep away from flames.
NOTICE: The air conditioner circuit is filled with high pressure gas, gas may spray out dangerously when loosening
lines.
47843013 21/05/2015
10.1 [10.001] / 10
18. Engine - Engine and crankcase
Items to prepare:
• Wrenches [ 7 mm, 8 mm, 9,5 mm, 10 mm, 13 mm,
14 mm, 17 mm, 36 mm ]
• Box wrench [ 24 mm]
• Shackle (with the required lifting capacity) x 2
• Wire rope (with the required breaking load)
• Lifting equipment (with the required lifting capacity)
• Marking pen
• Cap
• Plug
• Waste oil can
• Rag
• Cleaning fluid
• Wood plank, etc.
47843013 21/05/2015
10.1 [10.001] / 11
19. Engine - Engine and crankcase
Engine - Remove
1. Remove the counterweight. (For details, See " Coun-
terweight - Remove (39.140) and Counterweight - In-
stall (39.140)").
2. Remove the pump. (For details, See " Pump - Remove
(35.106) and Pump - Install (35.106)").
3. Use a wrench [ 14 mm] to remove the bolts (1) and (2),
and then remove the fan shroud (3).
LPIL12CX00144BB 1
4. Use a wrench to remove the bolts (1), and then remove
the fan guard (2).
LPIL12CX00145AB 2
5. Use a wrench [ 7 mm] to loosen the hose band (1) on
the radiator, and then remove the upper hose (2).
SMIL13CEX1230AB 3
47843013 21/05/2015
10.1 [10.001] / 12
20. Engine - Engine and crankcase
6. Use a wrench [ 7 mm] to loosen the hose band (1) on
the radiator, and then remove the lower hose (2).
• Attach caps at each location of the radiator and the
hose so as to prevent invasion of water, dust, and
dirt.
• Completely drain coolant before removing the radia-
tor hose.
SMIL13CEX1231AB 4
7. Use a wrench [ 12 mm] to loosen the line bolts (1) in 2
locations, and then remove the pipings (2) and (3) from
the compressor.
• Make sure to remove the piping (2) of low pressure
(suction side) side first.
• Attach caps and plugs at each location of the com-
pressor and piping in order to prevent invasion of wa-
ter, dust and dirt.
3. Line (discharge side)
SMIL13CEX1232AB 5
8. Use a wrench [ 8 mm] to loosen the hose band (1) on
the intercooler, and then remove the hose (2).
• Attach caps at each location of the piping and the
hose so as to prevent invasion of water, dust and
dirt.
SMIL13CEX1233AB 6
9. Prepare a waste oil can (1).
• Drain the engine oil before removing the engine oil
hose.
SMIL13CEX1235AB 7
47843013 21/05/2015
10.1 [10.001] / 13
21. Engine - Engine and crankcase
10. Use a wrench [ 36 mm] to remove the 2 engine oil
remote hoses (1).
• Apply marking at each location of the engine and the
hoses so as to match connections at assembling.
• Attach caps and plugs at each location of the engine
and the hoses so as to prevent invasion of water,
dust and dirt.
• Wash each location of the engine and the hoses by
blowing parts cleaner so as to prevent adhering dirt
at connections and not to damage them.
SMIL13CEX1236AB 8
11. Remove the nut (1) with a wrench [ 13 mm] to remove
the battery cable (2) for minus side.
• Secure the terminal and harness in order to prevent
them from touching the frame or other parts when
they have been removed. Or protect them with a
rubber cap or other cap to prevent sparks.
SMIL14CEX5664AB 9
12. Use a wrench [ 8 mm] to remove the nut (1), and then
disconnect the wiring (2) from the starter motor.
SMIL13CEX1238AB 10
13. Use a wrench [ 14 mm] to remove the nut (1), and then
disconnect the wiring (2) from the starter motor.
SMIL13CEX1239AB 11
47843013 21/05/2015
10.1 [10.001] / 14
22. Engine - Engine and crankcase
14. Remove the hose band (1), and then remove the fuel
hose (2).
• Attach caps and plugs at the engine and the hoses
so as to prevent invasion of water, dust and dirt.
SMIL13CEX1240AB 12
15. Remove the hose band (1), and then remove the fuel
hose (2).
• Attach caps and plugs at the engine and the hoses
so as to prevent invasion of water, dust and dirt.
SMIL13CEX1241AB 13
16. Use a wrench [ 13 mm] to remove the 2 bolts (1), and
then remove the connector bracket (2).
SMIL13CEX1242AB 14
17. Use a wrench [ 13 mm] to remove the hose band (1)
from the bracket, and then remove the connectors (2).
• Wrap the disconnected connectors with a plastic
sheet after bundle them.
SMIL13CEX1243AB 15
47843013 21/05/2015
10.1 [10.001] / 15
23. Engine - Engine and crankcase
18. Loosen the hose band to disconnect the three heater
hoses (1).
Loosen the hose band to disconnect the fuel hose (2).
• Attach caps and plugs at the engine and the hoses
so as to prevent invasion of water, dust and dirt.
SMIL14CEX5665AB 16
19. Use a wrench [ 9.5 mm] to loosen the hose band (1),
and then remove the air hose (2).
• Attach caps at the piping and the hose so as to pre-
vent invasion of water, dust and dirt.
SMIL13CEX1248AB 17
20. Remove the connectors (1) from the alternator.
SMIL13CEX1249AB 18
21. Use a wrench [ 10 mm] to remove the nut (1), and then
remove the wiring (2) from the alternator.
SMIL13CEX1250AB 19
47843013 21/05/2015
10.1 [10.001] / 16
24. Engine - Engine and crankcase
22. Remove the six nuts (1) with a wrench [ 13 mm] to
remove the muffler (2).
SMIL14CEX5666AB 20
23. Attach the two shackles (1) and then secure the en-
gine main unit with a wire rope (2) and a lifting equip-
ment.
SMIL13CEX1252BB 21
47843013 21/05/2015
10.1 [10.001] / 17
25. Engine - Engine and crankcase
24. Use a box wrench [ 24 mm] to remove the 4 bolts (1)
from the mount.
SMIL13CEX1253BB 22
25. Lift the engine main unit with a wire rope (1) and a
lifting equipment. Make sure that you have a safe site,
and then settle the engine on a wood plank or other
block.
SMIL13CEX1254BB 23
47843013 21/05/2015
10.1 [10.001] / 18
26. Engine - Engine and crankcase
Engine - Install
1. To install the engine, perform the reverse of the removal
procedure.
After installing the engine, resupply coolant and engine
oil, perform fuel line air bleeding, and perform filling for
the air-conditioner gas.
For details, see the individual explanations for each
procedure.
2. Run the engine at no-load idling and check for any wa-
ter or oil leaks.
3. Attach the hydraulic pump, covers, and counterweight.
For details, see the individual explanations for each
procedure.
47843013 21/05/2015
10.1 [10.001] / 19
27. Engine - Engine and crankcase
Engine - Check - Engine oil
WARNING
Burn hazard!
Do not handle any service fluid (engine coolant, engine oil, hydraulic oil, etc.) at temperatures that
exceed 49 °C (120 °F). Allow fluids to cool before proceeding.
Failure to comply could result in death or serious injury.
W0330B
NOTICE: The engine should be in a horizontal position.
NOTICE: Wait at least 5 min before starting the engine and after stopping the engine.
Engine oil inspection
1. Remove the oil level gauge from the oil level gauge
guide tube.
NOTE: Wipe off the engine oil remaining on the oil level
gauge.
2. Install the oil level gauge to the oil level gauge guide
tube.
3. Remove the oil level gauge from the oil level gauge
guide tube.
4. Inspect the engine oil.
NOTE: Check the engine oil remaining on the oil level
gauge to inspect the engine oil level.
1. Upper limit
2. Lower limit
NOTE: If the oil level is under the lower limit, add engine
oil. Replace the engine oil if engine oil is dirty.
SMIL14CEX3221AB 1
47843013 21/05/2015
10.1 [10.001] / 20
28. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
29. Engine - Engine and crankcase
Engine - Test - Engine oil
Sampling of engine oil
1. Open the side door (1).
At this time, make sure to apply the lock (2).
SMIL14CEX1174AB 1
2. Place a sampling container under the sampling port (1).
3. Open the valve (2) to drain a proper amount of oil.
4. Close the valve (2) to check that there is no leakage.
5. If necessary, add the same amount of oil as the drained
oil.
SMIL14CEX1175AB 2
47843013 21/05/2015
10.1 [10.001] / 21