This document is the service manual for the CX145D SR Crawler Excavator. It contains over 30 sections covering all major systems of the excavator, including the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms/dippers/buckets, dozer blade, platform/cab/bodywork. The introduction emphasizes that all repair and maintenance work must only be carried out by qualified dealership personnel strictly following the instructions provided using special tools whenever possible.
Case cx160 d crawler excavator service repair manualfusjejfjskekemm
This document is a service manual for CX160D and CX180D crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the procedures in the manual. It notes the manufacturer is not responsible for damages caused by unauthorized parts or repairs.
Case wx218 wheeled excavator service repair manual instant downloadufjjsjekkemmme
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
Case cx290 d crawler excavator service repair manualdfujsjefjkskemm
This document is a service manual for the CX290D Crawler Excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. The introduction emphasizes that all repair and maintenance work should only be performed by qualified dealership personnel using the proper instructions and tools. It notes that the manufacturer will not be responsible for damages caused by unauthorized parts or repairs.
Case wx218 wheeled excavator service repair manualfdjjjsekkskemm
The document is a service manual for a WX218 wheeled excavator. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers and buckets, dozer blade and arm, and the platform, cab, bodywork and decals. The manual provides removal and installation instructions for components with references to specific section numbers for more details.
Case cx245 d sr crawler excavator service repair manualhfjsjekfksmem
This document is a service manual for a CX245D SR crawler excavator that contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blade, platform, cab, bodywork, and decals. It provides repair and maintenance instructions that should only be performed by qualified dealership personnel using the specified tools and procedures. The manufacturer will not be responsible for damages caused by unapproved parts or components used for servicing or repair.
Case cx210 d, cx210d long reach crawler excavator service repair manualfujsjefjsekkem
1. The document is a service manual that provides specifications and descriptions for key components of the CX210D crawler excavator engine.
2. It includes detailed specifications for the engine, cooling system, electrical system, and descriptions of components like the cylinder block, cylinder head, pistons, crankshaft, and EGR system.
3. The manual explains that many components use techniques like angle tightening of bolts to improve reliability and durability. It provides the information needed to service and repair the engine.
Case cx250 d nlc (tier4 final) crawler excavator service repair manualfujsjefjsekkem
This document is a service manual for the CX250D Crawler Excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work must only be done by qualified dealership personnel using the proper tools and procedures, and unauthorized work or parts will void any warranty.
Case cx245 d sr crawler excavator service repair manualjfjkskefksmem
This service manual section provides specifications and descriptions for servicing the engine on the CX245D SR crawler excavator. It includes specifications for the engine, cooling system, electrical system, and identification information. The manual gives the engine type and model, cylinder dimensions, lubrication details, fuel system components, and electrical component specifications to guide technicians in servicing the engine.
Case cx160 d crawler excavator service repair manualfusjejfjskekemm
This document is a service manual for CX160D and CX180D crawler excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, and the platform, cab, bodywork and decals. The introduction emphasizes that repair and maintenance should only be performed by qualified dealership personnel according to the procedures in the manual. It notes the manufacturer is not responsible for damages caused by unauthorized parts or repairs.
Case wx218 wheeled excavator service repair manual instant downloadufjjsjekkemmme
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
Case cx290 d crawler excavator service repair manualdfujsjefjkskemm
This document is a service manual for the CX290D Crawler Excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. The introduction emphasizes that all repair and maintenance work should only be performed by qualified dealership personnel using the proper instructions and tools. It notes that the manufacturer will not be responsible for damages caused by unauthorized parts or repairs.
Case wx218 wheeled excavator service repair manualfdjjjsekkskemm
The document is a service manual for a WX218 wheeled excavator. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers and buckets, dozer blade and arm, and the platform, cab, bodywork and decals. The manual provides removal and installation instructions for components with references to specific section numbers for more details.
Case cx245 d sr crawler excavator service repair manualhfjsjekfksmem
This document is a service manual for a CX245D SR crawler excavator that contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blade, platform, cab, bodywork, and decals. It provides repair and maintenance instructions that should only be performed by qualified dealership personnel using the specified tools and procedures. The manufacturer will not be responsible for damages caused by unapproved parts or components used for servicing or repair.
Case cx210 d, cx210d long reach crawler excavator service repair manualfujsjefjsekkem
1. The document is a service manual that provides specifications and descriptions for key components of the CX210D crawler excavator engine.
2. It includes detailed specifications for the engine, cooling system, electrical system, and descriptions of components like the cylinder block, cylinder head, pistons, crankshaft, and EGR system.
3. The manual explains that many components use techniques like angle tightening of bolts to improve reliability and durability. It provides the information needed to service and repair the engine.
Case cx250 d nlc (tier4 final) crawler excavator service repair manualfujsjefjsekkem
This document is a service manual for the CX250D Crawler Excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work must only be done by qualified dealership personnel using the proper tools and procedures, and unauthorized work or parts will void any warranty.
Case cx245 d sr crawler excavator service repair manualjfjkskefksmem
This service manual section provides specifications and descriptions for servicing the engine on the CX245D SR crawler excavator. It includes specifications for the engine, cooling system, electrical system, and identification information. The manual gives the engine type and model, cylinder dimensions, lubrication details, fuel system components, and electrical component specifications to guide technicians in servicing the engine.
Case cx245 d sr crawler excavator service repair manualufjsekksmemm
The document is a service manual that provides specifications and repair/maintenance instructions for various components of a Case CX245D SR crawler excavator, including the engine, hydraulic systems, frames, tracks, cab climate control, electrical systems, booms/dippers/buckets, dozer blade, and cab/bodywork. It contains sections with titles corresponding to major vehicle systems and specific components. Each section includes numbered subsections providing details on part numbers, specifications, diagrams, removal/installation procedures, and inspections for the parts covered.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document is a service manual for the WX218 Wheeled Excavator. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers and buckets, dozer blade and arm, and the platform, cab, bodywork and decals. The manual stresses that repair and maintenance work should only be carried out by qualified dealership personnel using the specified procedures and tools.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfjiuliu14811471
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on the air intake system, fuel filters, and other engine components with procedures for removal, installation, and replacement of parts.
3. The manual also covers systems like the transmission, hydraulics, electrical, frames, and attachments with the excavator and provides maintenance instructions.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfidklskddmmd
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfbugukua0303629
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on equipment.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfruan49549560
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
Case cx500 c tier iii crawler excavator service repair manualfujjsefkskemme
The document is a service manual section about an engine. It provides specifications for the engine including displacement, power output, cooling system details, lubrication system details, dimensions, valve timing, and electrical system components. It also lists special tools needed for tasks like removing and installing cylinder liners.
Case cx230 b crawler excavator service repair manualfujjsefkskemme
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are provided for common fasteners.
Case cx290 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX290D Crawler Excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. The introduction emphasizes that all repair and maintenance work should only be performed by qualified dealership personnel using the proper instructions and tools. It notes that the manufacturer will not be responsible for damages caused by unauthorized parts or repairs.
Case cx210 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It contains sections on the engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork and decals. Repair and maintenance work should only be performed by qualified dealership personnel using the procedures in this manual and special tools as needed. The manufacturer is not responsible for damages caused by unauthorized parts or repairs.
Case cx290 crawler excavator service repair manualfujjsefkskemme
This document provides specifications and technical information for a Case construction machine. It includes sections on machine identification numbers, recommended fluids and lubricants, technical specifications, dimensions of track and attachment components, and special torque settings. Safety warnings are provided throughout advising technicians to follow proper procedures when servicing the machine.
Case cx260 c crawler excavator service repair manualfujjsefkskemme
This service manual provides maintenance and repair information for the CX260C crawler excavator. The manual is divided into sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, platform cab bodywork and decals. Safety precautions are provided to alert technicians to potential hazards when servicing equipment. The manual contains detailed technical information on maintenance and repairs needed to keep the excavator in proper working order.
Case cx240 b crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx210 b forestry machine crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx220 c hydraulic excavator service repair manualfujjsefkskemme
The document is a service manual for a CX220C Hydraulic Excavator. It provides instructions for removing and servicing the excavator's engine. The manual lists the necessary preparations before removing the engine, which include disconnecting electrical connections, removing hoses, guards, and other components. Detailed steps are provided for removing the engine, including disconnecting harness connectors to the engine and electronic control unit. Safety precautions are also outlined.
Case cx180 c tier iii crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX180C Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. Safety is emphasized, and only qualified dealership personnel should perform repairs following the procedures in the manual. The manual provides specifications to service the excavator accurately.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...fujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx180 c crawler excavator service repair manualfujjsefkskemme
The document is a service manual for a CX180C crawler excavator. It provides specifications and descriptions for the excavator's engine, including identification information, static descriptions of engine components, and specifications for the cooling, electrical, and fuel systems. The manual contains sections on troubleshooting engine issues and replacing engine components.
Case cx210 d long reach crawler excavator service repair manualfujjsefkskemme
The document is a service manual that provides specifications and repair/maintenance instructions for CX210D and CX230D crawler excavators. It covers the engine, hydraulic systems, frames, tracks, cab climate control, electrical systems, booms/dippers/buckets, and cab/bodywork. The introduction section outlines safety rules for working on the equipment.
Case cx160 c crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX160C Crawler Excavator that contains instructions for repair and maintenance work. It warns that all work must be done by qualified dealership personnel according to the procedures to avoid damages. The manufacturer is not responsible for damages caused by unauthorized parts. Specifications in the manual are subject to change without notice. Refer any questions to CASE CONSTRUCTION Sales and Service Networks.
Case cx210 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 c crawler excavator service repair manualfujjsefkskemme
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. Each section includes subsections that provide instructions for repair and maintenance of specific components. The introduction emphasizes that all repair and maintenance work must be carried out by qualified dealership personnel strictly following the procedures in the manual.
More Related Content
Similar to Case cx145 d sr crawler excavator service repair manual
Case cx245 d sr crawler excavator service repair manualufjsekksmemm
The document is a service manual that provides specifications and repair/maintenance instructions for various components of a Case CX245D SR crawler excavator, including the engine, hydraulic systems, frames, tracks, cab climate control, electrical systems, booms/dippers/buckets, dozer blade, and cab/bodywork. It contains sections with titles corresponding to major vehicle systems and specific components. Each section includes numbered subsections providing details on part numbers, specifications, diagrams, removal/installation procedures, and inspections for the parts covered.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document is a service manual for the WX218 Wheeled Excavator. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers and buckets, dozer blade and arm, and the platform, cab, bodywork and decals. The manual stresses that repair and maintenance work should only be carried out by qualified dealership personnel using the specified procedures and tools.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfjiuliu14811471
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on the air intake system, fuel filters, and other engine components with procedures for removal, installation, and replacement of parts.
3. The manual also covers systems like the transmission, hydraulics, electrical, frames, and attachments with the excavator and provides maintenance instructions.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfidklskddmmd
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfbugukua0303629
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on equipment.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfruan49549560
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
Similar to Case cx145 d sr crawler excavator service repair manual (6)
Case cx500 c tier iii crawler excavator service repair manualfujjsefkskemme
The document is a service manual section about an engine. It provides specifications for the engine including displacement, power output, cooling system details, lubrication system details, dimensions, valve timing, and electrical system components. It also lists special tools needed for tasks like removing and installing cylinder liners.
Case cx230 b crawler excavator service repair manualfujjsefkskemme
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are provided for common fasteners.
Case cx290 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX290D Crawler Excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. The introduction emphasizes that all repair and maintenance work should only be performed by qualified dealership personnel using the proper instructions and tools. It notes that the manufacturer will not be responsible for damages caused by unauthorized parts or repairs.
Case cx210 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It contains sections on the engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork and decals. Repair and maintenance work should only be performed by qualified dealership personnel using the procedures in this manual and special tools as needed. The manufacturer is not responsible for damages caused by unauthorized parts or repairs.
Case cx290 crawler excavator service repair manualfujjsefkskemme
This document provides specifications and technical information for a Case construction machine. It includes sections on machine identification numbers, recommended fluids and lubricants, technical specifications, dimensions of track and attachment components, and special torque settings. Safety warnings are provided throughout advising technicians to follow proper procedures when servicing the machine.
Case cx260 c crawler excavator service repair manualfujjsefkskemme
This service manual provides maintenance and repair information for the CX260C crawler excavator. The manual is divided into sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, platform cab bodywork and decals. Safety precautions are provided to alert technicians to potential hazards when servicing equipment. The manual contains detailed technical information on maintenance and repairs needed to keep the excavator in proper working order.
Case cx240 b crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx210 b forestry machine crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx220 c hydraulic excavator service repair manualfujjsefkskemme
The document is a service manual for a CX220C Hydraulic Excavator. It provides instructions for removing and servicing the excavator's engine. The manual lists the necessary preparations before removing the engine, which include disconnecting electrical connections, removing hoses, guards, and other components. Detailed steps are provided for removing the engine, including disconnecting harness connectors to the engine and electronic control unit. Safety precautions are also outlined.
Case cx180 c tier iii crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX180C Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. Safety is emphasized, and only qualified dealership personnel should perform repairs following the procedures in the manual. The manual provides specifications to service the excavator accurately.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...fujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx180 c crawler excavator service repair manualfujjsefkskemme
The document is a service manual for a CX180C crawler excavator. It provides specifications and descriptions for the excavator's engine, including identification information, static descriptions of engine components, and specifications for the cooling, electrical, and fuel systems. The manual contains sections on troubleshooting engine issues and replacing engine components.
Case cx210 d long reach crawler excavator service repair manualfujjsefkskemme
The document is a service manual that provides specifications and repair/maintenance instructions for CX210D and CX230D crawler excavators. It covers the engine, hydraulic systems, frames, tracks, cab climate control, electrical systems, booms/dippers/buckets, and cab/bodywork. The introduction section outlines safety rules for working on the equipment.
Case cx160 c crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX160C Crawler Excavator that contains instructions for repair and maintenance work. It warns that all work must be done by qualified dealership personnel according to the procedures to avoid damages. The manufacturer is not responsible for damages caused by unauthorized parts. Specifications in the manual are subject to change without notice. Refer any questions to CASE CONSTRUCTION Sales and Service Networks.
Case cx210 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 c crawler excavator service repair manualfujjsefkskemme
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. Each section includes subsections that provide instructions for repair and maintenance of specific components. The introduction emphasizes that all repair and maintenance work must be carried out by qualified dealership personnel strictly following the procedures in the manual.
Case cx210 b crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any parts that are worn or damaged. Technicians are instructed to inspect bearings for easy rotation and replace any bearings that are rough or damaged. Standard torque values are provided for cap screws and nuts used in maintenance and repairs.
Case ck25 crawler excavator service repair manualfujjsefkskemme
The document provides instructions for removing and installing the engine on CK25-CK28 Crawler Excavators. It outlines 7 steps: 1) Park the machine and lower attachments; 2) Disconnect the battery; 3) Remove the cab or canopy; 4) Remove engine protector bolts; 5) Remove the hydraulic oil reservoir; 6) Drain the coolant by opening the radiator drain valve; 7) Remove hood mounting bolts from the engine compartment. Reinstallation follows the removal steps in reverse order.
Case 1188 crawler excavator service repair manualfujjsefkskemme
This document provides a table of contents for a manual on 1188 Hydraulic Wheeled and Crawler Excavators. The table lists 9 sections and various subsections on topics such as the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upperstructure. Reference numbers are provided for each subsection for locating additional detailed information.
Case cx160 b crawler excavator service repair manualfujjsefkskemme
Here are the recommended engine oils for different ambient temperatures:
- Above 0°C (32°F):
CASE/AKCELA MULTIGRADE "No. 1 ENGINE OIL" SAE 15W-40, API CF-4 or CG-4
- Below 0°C (32°F):
CASE/AKCELA MULTIGRADE "No. 1 ENGINE OIL" SAE 5W-30, API CF-4 or CG-4
- Extreme cold temperatures:
CASE/AKCELA MULTIGRADE "No. 1 ENGINE OIL" SAE 0W-30, API CF-4 or CG-4
The CASE/AKCELA
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
7. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE CONSTRUCTION Sales and Service Networks.
51458637 15/03/2018
4
8. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
51458637 15/03/2018
5
9. INTRODUCTION
Safety rules - General information
Cleaning
Clean the metal parts with cleaning solution that meets the standard and steam cleaning. (except for bearings)
After cleaning, dry well, and inject oil in all parts.
Also inject oil into the bearings after drying.
Inspection
When disassembling parts, check all the parts.
If there are any worn or damaged parts, replace them.
Inspect carefully to prevent initial breakdowns.
Bearing
Replace any loose bearings.
Air dry bearings before installing them.
Needle bearing
When inserting needle bearings, be very careful not to damage them.
Apply grease to the section where the needle bearing will be inserted.
Gear
Check that there is no wear and no damage.
Oil seal, O-ring, gasket
Always install new oil seals, O-rings, and gaskets.
Apply grease to sections where oil seals and O-rings will be inserted.
Shaft
Check that there is no wear and no damage.
Check the bearings and check for damaged oil seals on the shaft.
Service parts
Install CASE CONSTRUCTION genuine service parts.
When placing an order, check the parts catalog. It contains the CASE CONSTRUCTION genuine part numbers.
Any breakdowns arising from the installation of non-genuine parts are not covered by the warranty.
Lubricants (fuel, hydraulic oil)
Use the oil from the specified company or specified in the operator's manual or service Manual.
Any breakdowns arising from any fuel or hydraulic oil other than those specified are not covered by the warranty.
51458637 15/03/2018
6
11. Engine - Engine and crankcase
Engine - General specification
Engine main specifications
Item Engine model 4HK1
Type
Diesel/4-cycle/water-cooled, inline 4 cylinder
DOHC
Shape of combustion chamber Direct injection type
Cylinder liner type Dry type
Cylinder bore x stroke 95.4 mm (3.76 in) x 104.9 mm (4.13 in)
Displacement 2.999 L (183 in³)
Compression ratio 16.5
Compression pressure 3 MPa (435 psi) 200 RPM
Idling speed 800 RPM
Intake 0.15 mm (0.006 in) While cool
Valve clearance
Exhaust 0.15 mm (0.006 in) While cool
Ignition method Compression ignition
Injection order 1, 3, 4, 2
Lubrication system
Lubrication type Pressure type
Oil pump type Gear type
Lubrication oil amount 13 – 17 L (3.4 – 4.5 US gal)
Oil filter type Full-flow filter (cartridge type)
Oil cooling type Built-in type, water cooled
Cooling system
Cooling type Water cooling
Water pump type Centrifugal, belt type
Thermostat type Wax type unit
Open valve temperature of the thermostat valve 82.0 °C (180 °F)
Coolant container 6.0 L (1.6 US gal) Engine only
Fuel system
Injection pump type Electronic control common rail type
Governor type Electronic type
Timer type Electronic type
Multi-hole type
Injection nozzle type
8 holes
Charging system
Generator type AC type
Output 24 V / 50 A
Regulator type IC
Starter system
Starter type Reduction type
Output 24 V / 4.0 kW
Preheat system
Preheat system type Glow plug
Glow plug standard voltage/current 23 V / 3.8 A
51458637 15/03/2018
10.1 [10.001] / 3
12. Engine - Engine and crankcase
Cooling system main specifications
Item Specifications
Water pump Centrifugal impeller method
Pulley ratio 1.03
Thermostat Wax pellet type
Open valve temperature 82.0 °C (180 °F)
Full-open temperature 95.0 °C (203 °F)
Valve lift amount when fully opened 10 mm (0.394 in)
Electrical system main specifications
Generator
Item Data
Isuzu parts number 8980921122
Nominal output 24 V/ 50 A
Rated rotation count 5000 RPM
Regulator type IC type
Regulated voltage 28 – 29 V
Weight 9.1 kg (20.1 lb)
Starter
Type (Manufacturer) Hitachi
Voltage 24 V
Output 4 kW (5.4 Hp)Rating
Time 30 s
Number of pinion teeth 11
Rotational direction (facing the pinion) Clockwise
Weight (approx.) 6.3 kg (13.9 lb)
Current/voltage Less than 120 A / 23 V
No-load characteristics
Revolution speed More than 3500 RPM
Current/voltage Less than 250 A / 18.6 V
Torque More than 13.2 N·m (9.74 lb ft)Load characteristics
Revolution speed More than 1590 RPM
Current/voltage Less than 1100 A / 10 V
Locking characteristics
Torque More than 47 N·m (34.67 lb ft)
Glow plug
Item Type
Preheat device model Glow plug
Glow plug rated voltage/current 23 V / 3.5 A
51458637 15/03/2018
10.1 [10.001] / 4
13. Engine - Engine and crankcase
Engine - Identification
SMIL15CEX8993FB 1
1. Engine number stamping
2. Engine model stamping
51458637 15/03/2018
10.1 [10.001] / 5
14. Engine - Engine and crankcase
Engine - Static description
Engine electronic control
The control provided by the control unit applies to the range from injection to air intake and exhaust, including fuel
injection quantity, injection timing, air intake restriction, EGR, and idling speed.
Cylinder block
The cylinder block is made of cast iron, and it has an equal center distance for each bore and a high rigidity, and the
center of the crankshaft matches the center of the block.
Piston
The piston is a strut cast thermal flow piston made of aluminum alloy, and the combustion chamber is the round
re-entrant type.
Cylinder head
The cylinder head is made of cast iron and has four valves per cylinder. The angle tightening method has been
adopted for the cylinder head bolt to further improve its reliability and durability.
Crankshaft
The crankshaft is not fit to be reused, as it has tufftride treatment applied. In case of any defects, replace with a new
one.
EGR system
The EGR system is controlled by the engine control module (ECM) based on various data such as coolant tempera-
ture, engine speed or engine load etc., and is cleaned by re-circulating the exhaust gas. The main components are
EGR valve, EGR cooler, and various sensors.
Connecting rod cap bolt
The angle tightening method has been adopted for the connecting rod cap bolt to further improve its reliability and
durability.
Common rail type electronic control injection system
The common rail type electronically controlled injection system consists of a fuel supply pump that sets the target
pressure of high-pressure fuel to supply the fuel, a common rail to measure high-pressure fuel, and a fuel injector
to emit a fine spray of fuel. Each of these is controlled by the ECM based on various signals to control the injection
timing and injection amount in accordance with the driving condition.
Fuel injector
An 8-hole nozzle has been adopted for the fuel injector, and fuel injection quantity or injection timing is adjusted by
opening and closing the electromagnetic valve of injector head.
The ECM corrects the differences in fuel injection quantity between fuel injectors based on the ID code data in the
memory. The ID code data must be recorded in ECM when adjusting fuel injector.
Fuel filter with sedimenter
The fuel filter with sedimenter makes use of the difference in specific gravity of diesel oil and water to removes water
and notifies the operator through an indicator when the water reaches its full capacity.
51458637 15/03/2018
10.1 [10.001] / 6
15. Engine - Engine and crankcase
Preheat system
The preheat system consists of ECM, glow relay, glow plug, and glow indicator lamp. To help start the engine at low
coolant temperature, the preheat system is activated when engine coolant temperature is low.
Lubricating system
It uses the full flow bypass oil filter, and cools the piston with water-cooled oil cooler and oil jet.
51458637 15/03/2018
10.1 [10.001] / 7
16. Engine - Engine and crankcase
Engine - Prepare
WARNING
Escaping fluid!
Hydraulic fluid or diesel fuel leaking under pressure can penetrate the skin and cause infection or
other injury. To prevent personal injury: Relieve all pressure before disconnecting fluid lines or per-
forming work on the hydraulic system. Before applying pressure, make sure all connections are tight
and all components are in good condition. Never use your hand to check for suspected leaks under
pressure. Use a piece of cardboard or wood for this purpose. If injured by leaking fluid, see your
doctor immediately.
Failure to comply could result in death or serious injury.
W0178A
WARNING
Avoid injury!
Shut off the engine, remove the key, and make sure all motion is stopped before servicing the machine.
Failure to comply could result in death or serious injury.
W1128A
WARNING
Crushing hazard!
The lifting systems must be operated by qualified personnel who are aware of the correct procedures
to follow. Make sure all lifting equipment is in good condition, and all hooks are equipped with safety
latches.
Failure to comply could result in death or serious injury.
W0256A
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
WARNING
Explosion hazard!
Batteries emit explosive gases. Always ventilate when using in an enclosed area or when charging.
Keep the battery away from sparks, open flames, and other ignition sources.
Failure to comply could result in death or serious injury.
W0369A
NOTICE: Keep away from flames.
NOTICE: The air conditioner circuit is filled with high pressure gas, gas may spray out dangerously when loosening
lines.
51458637 15/03/2018
10.1 [10.001] / 8
17. Engine - Engine and crankcase
Items to prepare:
• Wrenches [ 7 mm, 10 mm, 13 mm, 17 mm, 19 mm,
36 mm ]
• Box wrench [ 24 mm]
• Shackle (with the required lifting capacity) x 2
• Wire rope (with the required breaking load)
• Lifting equipment (with the required lifting capacity)
• Pliers
• Marking pen
• Cap
• Plug
• Rag
• Cleaning fluid
• Wood plank, etc.
51458637 15/03/2018
10.1 [10.001] / 9
18. Engine - Engine and crankcase
Engine - Remove
1. Remove the 2 bolts (1) to remove the battery cover (2).
SMIL17CEX3295AA 1
2. Remove the bolt (1) with a wrench [ 17 mm] to remove
the negative battery cable (2).
NOTICE: While the indicator (LED) of the battery discon-
nect switch is lit, do not turn OFF the battery disconnect
switch or disconnect its negative cable from the battery.(Af-
ter key OFF, lit for a maximum duration of 3 min)
• Secure the terminal and harness in order to prevent
them from touching the frame or other parts when
they have been removed.
Moreover, protect them with rubber caps etc. to pre-
vent sparks.
Bolt tightening torque: 10.6 – 13.0 N·m (7.82 –
9.59 lb ft)
SMIL17CEX3296AA 2
3. Remove the counterweight.
Refer to " Counterweight - Remove (39.140)" for de-
tails.
4. Remove the SCR.
Refer to " Selective Catalytic Reduction (SCR) muf-
fler and catalyst - Remove (10.500)" for details.
5. Remove the hydraulic pump.
Refer to "Removal and Installation of Hydraulic Pump"
for details.
6. Remove the coolant.
Refer to " Radiator - Remove (10.400)" for details.
7. Remove the 6 double nuts (1) with 2 wrenches [ 13 mm]
to remove the muffler (2).
SMIL17CEX0605AB 3
51458637 15/03/2018
10.1 [10.001] / 10
19. Engine - Engine and crankcase
8. Remove the 3 bolts (1) with a wrench [ 19 mm] to re-
move the cover (2). Remove the 4 bolts (3) with a
wrench [ 19 mm] to remove the cover (4).
SMIL17CEX3297AA 4
9. Remove the 4 bolts (1) with a wrench [ 19 mm] to re-
move the house frame (2).
Remove the 3 bolts (3) with a wrench [ 19 mm] to re-
move the cover (4).
SMIL17CEX3298AA 5
10. Disconnect the 5 connectors (1).
Remove the 2 bolts (2) with a wrench [ 13 mm] to
remove the engine harness (3).
Bolt (2) tightening torque: 12 – 18 N·m (8.85 –
13.28 lb ft)
SMIL17CEX3299AA 6
11. Remove the 3 bolts (1) with a wrench [ 13 mm] to
remove the engine harness (2).
Bolt (2) tightening torque: 12 – 18 N·m (8.85 –
13.28 lb ft)
SMIL17CEX3300AA 7
51458637 15/03/2018
10.1 [10.001] / 11
20. Engine - Engine and crankcase
12. Remove the bolts (1) with a wrench [ 10 mm].
Remove the connector (2) of the alternator.
Remove the harness (3) from the alternator.
SMIL15CEX4468AB 8
13. Remove the bolt (1) with a wrench [ 13 mm] to remove
the terminal cap (2).
Remove the wiring (3) and (4) from the starter with a
wrench.
Remove the bolt (5) with a wrench [ 17 mm] to remove
the wiring (6) from the frame.
SMIL15CEX4467AB 9
14. Disconnect the connector (1) of the air conditioner
compressor.
SMIL15CEX4466AB 10
15. Loosen the 2 bolts (2) of the piping with a wrench [
13 mm] to remove the 2 pipes (2) and (3).
• Make sure that the piping (2) on the low pressure
side is removed first.
• Attach caps and plugs to each location of the com-
pressor and piping to prevent the entry of water,
dust, and dirt.
Bolt (1) tightening torque: 20 – 25 N·m (14.75 –
18.44 lb ft)
SMIL17CEX3301AA 11
51458637 15/03/2018
10.1 [10.001] / 12
21. Engine - Engine and crankcase
16. Remove the 2 bolts (1) with a wrench [ 19 mm].
Loosen the 2 hose bands (2) to remove the intercooler
hose (3).
Loosen the 2 hose bands (4) to remove the radiator
hose (5).
Loosen the hose band (6) and (7) to remove the inlet
hose (8).
Band (4) and (7) tightening torque: 4.9 – 5.9 N·m
(3.61 – 4.35 lb ft)
Band (2) and (6) tightening torque: 8.8 – 9.8 N·m
(6.49 – 7.23 lb ft)
SMIL17CEX3302AA 12
17. Remove the bolt (1) with a wrench [ 13 mm].
Remove the hose band (2) to remove the inlet hose
(3).
Bolt (1) tightening torque: 12 – 18 N·m (8.85 –
13.28 lb ft)
SMIL17CEX3303AA 13
18. Loosen the 2 hose bands (1) to remove the intercooler
hose (2).
Band (1) tightening torque: 8.8 – 9.8 N·m (6.49 –
7.23 lb ft)
SMIL17CEX3304AA 14
19. Loosen the hose band (1) to remove the radiator hose
(2).
Band (1) tightening torque: 4.9 – 5.9 N·m (3.61 –
4.35 lb ft)
SMIL17CEX3305AA 15
51458637 15/03/2018
10.1 [10.001] / 13
22. Engine - Engine and crankcase
20. Remove the bolts (1) and (2) with a wrench to remove
the fan shroud (3).
LPIL12CX00144BB 16
21. Remove the bolts (1) with a wrench to remove the fan
guard (2).
LPIL12CX00145AB 17
22. Remove the clamp (1).
Remove the 2 hose bands (2) to remove the 2 coolant
hoses (3).
• Apply marking to each location of the engine and
hoses so as to match connections at assembling.
• Attach caps and plugs to each location of the en-
gine and hoses to prevent the entry of water, dust,
and dirt.
SMIL17CEX3306AA 18
51458637 15/03/2018
10.1 [10.001] / 14
23. Engine - Engine and crankcase
23. Drain engine oil and prepare a waste oil can under
engine.
Remove the 2 engine oil remote hoses (1) with a
wrench [ 36 mm].
• Apply marking to each location of the engine and
hoses so as to match connections at assembling.
• Attach caps and plugs to each location of the en-
gine and hoses to prevent the entry of water, dust,
and dirt.
• Wash each location of the engine and hoses by
blowing parts cleaner so as to prevent adhering dirt
at connections and not to damage them.
Hose tightening torque: 54.1 – 63.9 N·m (39.90 –
47.13 lb ft)]
SMIL17CEX3307AA 19
24. Remove the hose band (1) to remove the fuel hoses
(2) and (3).
• Attach caps and plugs to the engine and the hoses
to prevent the entry of water, dust, and dirt.
SMIL15CEX4472AB 20
25. Attach the shackles to 2 lifting points (1) of the engine
main unit, and secure the engine main unit with wire
ropes and a lift-crane.
SMIL17CEX3308AA 21
51458637 15/03/2018
10.1 [10.001] / 15
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Engine - Engine and crankcase
26. Remove the 4 bolts (1) of the mount with a box wrench
[ 24 mm].
Bolt tightening torque: 264.9 – 313.9 N·m(195.38
– 231.52 lb ft)
SMIL17CEX3309BA 22
27. Lift the engine main unit with wire ropes (1) and a
lift-crane.
• Before lifting, be sure to check that hoses and con-
nectors are all disconnected.
Make sure that the area is safe, and then place the
engine on wood planks.
• Fully secure the engine so that it may not topple.
SMIL15CEX4476AB 23
51458637 15/03/2018
10.1 [10.001] / 16
26. Engine - Engine and crankcase
Engine - Install
1. To install the engine, perform the reverse of the removal
procedure.
When installing each bolt, tighten them to the specified
torque.
For bolts for which the torque is not specified, see
Torque - Bolt and nut () .
After removing the grease, apply liquid packing to the
radiator hose connection (both the inner side of the
hose and the outer side of the pipe), and tighten.
Tightening torque: 4.9 – 5.9 N·m (3.614 – 4.352 lb
ft)
After installation, add coolant, add engine oil, remove
air from the fuel line, clean, and fill air conditioner gas.
For details, follow their respective procedures and de-
scriptions.
NOTICE: After the installation of the dosing module of urea
SCR, the coolant piping of coolant control valve piping
needs to be bled of air. For air bleeding for the coolant
piping of coolant control valve piping, refer to " Coolant
control valve - Install (10.500)".
2. Check for fuel leakage, coolant leakage, oil leakage,
exhaust gas leakage, and abnormalities by running the
engine at idle speed with no load.
51458637 15/03/2018
10.1 [10.001] / 17
27. Engine - Engine and crankcase
Engine - Check - Engine oil
WARNING
Burn hazard!
Do not handle any service fluid (engine coolant, engine oil, hydraulic oil, etc.) at temperatures that
exceed 49 °C (120 °F). Allow fluids to cool before proceeding.
Failure to comply could result in death or serious injury.
W0330B
NOTICE: The engine should be in a horizontal position.
NOTICE: Wait at least 5 min before starting the engine and after stopping the engine.
Engine oil inspection
1. Remove the oil level gauge from the oil level gauge
guide tube.
NOTE: Wipe off the engine oil remaining on the oil level
gauge.
2. Install the oil level gauge to the oil level gauge guide
tube.
3. Remove the oil level gauge from the oil level gauge
guide tube.
4. Inspect the engine oil.
NOTE: Check the engine oil remaining on the oil level
gauge to inspect the engine oil level.
1. MAX
2. MIN
3. Acceptable oil amount
4. Requires replenishment
NOTE: If the oil level is under the lower limit, add engine
oil. Replace the engine oil if engine oil is dirty.
LPIL12CX009 1
51458637 15/03/2018
10.1 [10.001] / 18
28. Engine - Engine and crankcase
Engine - Test - Engine oil
Sampling of engine oil
1. Open the side door (1).
At this time, make sure to apply the lock (2).
SMIL17CEX0665AB 1
2. Place a sampling container under the sampling port (1).
3. Open the valve (2) to drain a proper amount of oil.
4. Close the valve (2) to check that there is no leakage.
5. If necessary, add the same amount of oil as the drained
oil.
SMIL17CEX3310AA 2
51458637 15/03/2018
10.1 [10.001] / 19