This document provides instructions for removing and installing the engine assembly of a crawler excavator. It describes disconnecting wiring, hoses and lines connected to components like the battery, radiator, air conditioner and starter. Lifting equipment like a crane is needed to remove the heavy engine assembly. Safety precautions are outlined, and specific tools and fastener sizes are listed.
Case cx145 csr tier 4 crawler excavator service repair manualufjsekksmemm
This document provides instructions for removing and installing the engine assembly of a crawler excavator. It describes disconnecting wiring, hoses and lines connected to components like the battery, radiator, air conditioner and starter. Lifting equipment like a crane is needed to remove the heavy engine assembly. Safety precautions are outlined, and specific tools and fastener sizes are listed.
Case cx210 c tier 4 crawler excavator service repair manualyfhjsjefkksemme
This document is a service manual section that provides general safety and technical information for working on Case CX210C Tier 4 crawler excavators. It covers topics such as cleaning, inspection, bearings, gears, seals, shafts, service parts, lubrication, and safety precautions. It also provides criteria for determining if an excavator's ROPS (rollover protective structure) meets regulatory standards based on the machine's weight class.
Case cx160 c tier 4 crawler excavator service repair manualufjsekksmemm
This document is a service manual for the CX160C Tier 4 crawler excavator. It provides general safety and maintenance information, including instructions to clean parts, inspect for wear, handle bearings, gears and seals. Standard torque values are also included. The document outlines ROPS criteria for various excavator models, specifying maximum weight classes that satisfy rollover protection standards. It warns that modifications affecting machine weight or boom position can impact compliance.
CASE CX135SR CRAWLER EXCAVATOR Service Repair Manualhjskekdmm
This is the Highly Detailed factory service repair manual for theCASE CX135SR CRAWLER EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE CX135SR CRAWLER EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
Distribution Systems
Power Production
Travelling
Body and Structure
Frame Positioning
Working Arm
Tools and Couplers
Hydraulic Electrical Schematic
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE CX135SR CRAWLER EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
CASE CX225SR CRAWLER EXCAVATOR Service Repair Manualhksemd yjekmd
This is the Highly Detailed factory service repair manual for theCASE CX225SR CRAWLER EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE CX225SR CRAWLER EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
Distribution Systems
Power Production
Travelling
Body and Structure
Frame Positioning
Working Arm
Tools and Couplers
Hydraulic Electrical Schematic
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE CX225SR CRAWLER EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Case cx470 c tier 4 crawler excavator service repair manualfdjjjsekkskemm
The document provides instructions for removing and installing an engine assembly. It lists safety warnings and preparation items needed. The steps include draining fluids, removing components attached to the engine like hoses, covers, and the muffler. Caps and plugs are used to cover openings, and the engine oil is drained before removing hoses. Marks are made to ensure correct reinstallation of hoses. Proper lifting and blocking is needed when heavy parts are removed.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 50001 ...dufjdjskkemm
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator. It includes sections on safety, specifications, general maintenance, the engine, upper structure, lower structure and chassis, front attachment, hydraulic and electrical systems, and optional equipment. Safety instructions are provided at the beginning highlighting the importance of following warnings, instructions, and procedures to avoid death or serious injury while operating or servicing the machine. The engine section provides an overview of engine components and procedures for replacing or removing the engine from the excavator.
Case cx350 c tier 4 crawler excavator service repair manualfdjjjsekkskemm
This document provides instructions for removing the engine assembly from a Case CX350C crawler excavator. It lists the necessary tools and safety precautions. The key steps include draining fluids, removing hoses, brackets, covers and guards. Radiator hoses, compressor lines, oil hoses and other connections must be capped or plugged during removal to prevent contamination. Proper lifting and handling methods are required due to the heavy weight of engine assembly components.
Case cx145 csr tier 4 crawler excavator service repair manualufjsekksmemm
This document provides instructions for removing and installing the engine assembly of a crawler excavator. It describes disconnecting wiring, hoses and lines connected to components like the battery, radiator, air conditioner and starter. Lifting equipment like a crane is needed to remove the heavy engine assembly. Safety precautions are outlined, and specific tools and fastener sizes are listed.
Case cx210 c tier 4 crawler excavator service repair manualyfhjsjefkksemme
This document is a service manual section that provides general safety and technical information for working on Case CX210C Tier 4 crawler excavators. It covers topics such as cleaning, inspection, bearings, gears, seals, shafts, service parts, lubrication, and safety precautions. It also provides criteria for determining if an excavator's ROPS (rollover protective structure) meets regulatory standards based on the machine's weight class.
Case cx160 c tier 4 crawler excavator service repair manualufjsekksmemm
This document is a service manual for the CX160C Tier 4 crawler excavator. It provides general safety and maintenance information, including instructions to clean parts, inspect for wear, handle bearings, gears and seals. Standard torque values are also included. The document outlines ROPS criteria for various excavator models, specifying maximum weight classes that satisfy rollover protection standards. It warns that modifications affecting machine weight or boom position can impact compliance.
CASE CX135SR CRAWLER EXCAVATOR Service Repair Manualhjskekdmm
This is the Highly Detailed factory service repair manual for theCASE CX135SR CRAWLER EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE CX135SR CRAWLER EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
Distribution Systems
Power Production
Travelling
Body and Structure
Frame Positioning
Working Arm
Tools and Couplers
Hydraulic Electrical Schematic
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE CX135SR CRAWLER EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
CASE CX225SR CRAWLER EXCAVATOR Service Repair Manualhksemd yjekmd
This is the Highly Detailed factory service repair manual for theCASE CX225SR CRAWLER EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE CX225SR CRAWLER EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
Distribution Systems
Power Production
Travelling
Body and Structure
Frame Positioning
Working Arm
Tools and Couplers
Hydraulic Electrical Schematic
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE CX225SR CRAWLER EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Case cx470 c tier 4 crawler excavator service repair manualfdjjjsekkskemm
The document provides instructions for removing and installing an engine assembly. It lists safety warnings and preparation items needed. The steps include draining fluids, removing components attached to the engine like hoses, covers, and the muffler. Caps and plugs are used to cover openings, and the engine oil is drained before removing hoses. Marks are made to ensure correct reinstallation of hoses. Proper lifting and blocking is needed when heavy parts are removed.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 50001 ...dufjdjskkemm
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator. It includes sections on safety, specifications, general maintenance, the engine, upper structure, lower structure and chassis, front attachment, hydraulic and electrical systems, and optional equipment. Safety instructions are provided at the beginning highlighting the importance of following warnings, instructions, and procedures to avoid death or serious injury while operating or servicing the machine. The engine section provides an overview of engine components and procedures for replacing or removing the engine from the excavator.
Case cx350 c tier 4 crawler excavator service repair manualfdjjjsekkskemm
This document provides instructions for removing the engine assembly from a Case CX350C crawler excavator. It lists the necessary tools and safety precautions. The key steps include draining fluids, removing hoses, brackets, covers and guards. Radiator hoses, compressor lines, oil hoses and other connections must be capped or plugged during removal to prevent contamination. Proper lifting and handling methods are required due to the heavy weight of engine assembly components.
Case cx145 csr tier 4 crawler excavator service repair manualfjjskekksemmm
This document provides instructions for removing and installing an engine assembly. It outlines 15 steps including removing components like the battery cables, counterweight, muffler, pump, fan shroud, radiator hoses, wiring harnesses, and air conditioning lines. Safety warnings are provided and tools needed are listed. Torque specifications are given for reinstalling components.
Case cx210 c tier 4 crawler excavator service repair manualfjjskekksemmm
This document is a service manual section for the CX210C Tier 4 crawler excavator. It provides specifications for the excavator such as its dimensions, weight, engine information, hydraulic system specifications, and standard torque data for bolts and nuts. The document instructs technicians on safety procedures, cleaning and inspecting components, and not modifying parts that could impact the ROPS safety rating. It also provides judging criteria to determine if a machine's weight and boom position meet ROPS safety standards.
Case cx160 c tier 4 crawler excavator service repair manualfjjskekksemmm
This document provides safety information and instructions for servicing a CX160C Tier 4 Crawler Excavator. It discusses general procedures for cleaning, inspection, bearings, gears, seals, shafts and service parts. It also provides warnings and safety precautions for working on and around heavy equipment. Standard torque data and ROPS criteria for various excavator models are included.
Case cx470 c tier 4 crawler excavator service repair manualfjjskekfsem
The document provides instructions for removing the engine assembly from a Case CX470C crawler excavator. It lists the necessary tools and parts, and outlines 14 steps to drain fluids, remove hoses, covers, and bolts to fully separate the engine from the excavator. Safety warnings are provided throughout regarding fire hazards, high pressure gases, sparks near batteries, suspended loads, and ensuring hydraulic pressure is released before working on the machine.
Case cx350 c tier 4 crawler excavator service repair manualfjjskekfsem
The document provides instructions for removing and installing an engine assembly from a crawler excavator. Key points include:
1) Drain engine oil and coolant before removal. Disconnect hoses, wires, and other connections between the engine and other components.
2) Use lifting equipment like shackles and a crane to lift the engine assembly out once it is detached.
3) To install, reverse the removal process and reattach all hoses, wires and other connections. Refill fluids and bleed lines as needed. Check for leaks once installed.
Case cx330 crawler excavator service repair manualfujjsekfkksekm
The document provides instructions for cleaning, inspecting, and maintaining various components of a machine. It describes cleaning procedures for metal parts, bearings, and oil passages. It also describes inspection procedures to check for wear and damage of parts like bearings, gears, shafts, and to replace any worn parts. The document instructs to use genuine replacement parts and the specified oils and lubricants. It provides safety warnings and cautions to be followed when servicing the machine.
Case cx330 crawler excavator service repair manualfujsjefkskemm
This document provides instructions for cleaning, inspecting, and replacing various parts when servicing heavy machinery. It emphasizes cleaning all metal parts with solvent and drying thoroughly before lubricating. All parts that show wear or damage should be replaced. Bearings should be cleaned in solvent and air dried, not with compressed air. The instructions also provide safety warnings and procedures for removing and installing the engine.
Kawasaki 135ZV WHEEL LOADER Service Repair Manual (Serial No. 13C-10201 and u...f7sejkddjmdkm
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Referring to these factors and values can help ensure bolts are properly tightened during reassembly to avoid issues like loosening over time.
Kawasaki 135ZV WHEEL LOADER Service Repair Manual (Serial No. 13C-10201 and u...uwbt828229
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Refer to the table to determine the appropriate tightening torque range for a given bolt based on these specifications. Be sure not to under or over tighten bolts from the recommended torque range to avoid issues.
Kawasaki 135ZV WHEEL LOADER Service Repair Manual (Serial No. 13C-10201 and u...f8uuseijdkmd3e
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Refer to the table to determine the appropriate tightening torque range for a given bolt based on these specifications. Be sure not to exceed the maximum torque limit to avoid damaging the bolt or threads.
Kawasaki 135ZV WHEEL LOADER Service Repair Manual (Serial No. 13C-10201 and u...jdksme9ddkkd
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Refer to the table to determine the appropriate tightening torque range for a given bolt based on these specifications. Be sure not to exceed the maximum torque limit to avoid damaging the bolt or threads.
Kawasaki 135ZV WHEEL LOADER Service Repair Manual (Serial No. 13C-10201 and u...jdkskmmdmd
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Refer to the table to determine the appropriate tightening torque range for a given bolt based on these specifications. Be sure not to exceed the maximum torque limit to avoid damaging the bolt or threads.
Kawasaki 135 zv wheel loader service repair manual (serial no. 13c 10201 and up)fioskdmmd
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Refer to the table to determine the appropriate tightening torque range for a given bolt based on these specifications. Be sure not to exceed the maximum torque limit to avoid bolt or thread damage.
Kawasaki 135 zv wheel loader service repair manual (serial no. 13c 10201 and up)fjjsieskekfmmse
This document provides guidelines for maintaining various components of a machine. It recommends specific lubricants for different parts, including engine oil, transmission fluid, hydraulic fluid, and grease. It lists lubricant change intervals and specifications for coolant mixtures. Safety symbols are defined that will be used in repair manuals. Abbreviations used in manuals are also outlined. Maintaining the proper lubricants and coolant mixtures per these guidelines is important for machine performance and service life.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 50001 ...ufsikkdjskemds
The document provides instructions for removing the cylinder head from an engine. The steps include:
1. Removing the water-cooled EGR cooler and brackets.
2. Removing bolts for the exhaust manifold and loosening adjacent bolts.
3. Removing the cooling system bleeder hose and cable duct from the intake.
4. Removing cable ties for the cable harness and depressurizing the fuel system.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 1001 a...fjskekkwersmem
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator. It includes sections on safety, specifications, general maintenance, the engine, upper structure, lower structure and chassis, front attachment, hydraulic and electrical systems, and optional equipment. Safety instructions are provided at the beginning emphasizing the need to read all manuals fully and follow warnings and instructions for safe operation and maintenance. An overview of the engine section describes the main engine components. Procedures for replacing or removing the entire engine are also provided.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 1001 a...dufjdjskkemm
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator. It includes sections on safety, specifications, general maintenance, the engine, upper structure, lower structure and chassis, front attachment, hydraulic and electrical systems, and optional equipment. Safety instructions are provided at the beginning highlighting the importance of following warnings, instructions, and procedures to avoid death or serious injury while operating or servicing the machine. An overview of replacing or removing the engine is also given with notes on disconnecting various components and lifting points.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 50001 ...fjskekkwersmem
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator. It includes sections on safety, specifications, general maintenance, the engine, upper structure, lower structure and chassis, front attachment, hydraulic and electrical systems, and optional equipment. Safety instructions are provided at the beginning emphasizing the need to read all manuals fully and follow warnings and instructions for safe operation and maintenance. An overview of the engine section describes the main engine components. Procedures for replacing or removing the entire engine are also provided.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 1001 a...ufsikkdjskemds
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator, including:
- The engine section covers safety instructions and an overview of the engine components. It also provides instructions for replacing and removing the engine.
- Other sections cover the upper structure, lower structure and chassis, front attachment components, hydraulic and electrical systems, and optional equipment.
- Each section begins with safety messages and provides detailed instructions, diagrams and specifications for maintenance, repairs, and inspections of the various excavator systems and components.
Case cx330 crawler excavator service repair manualfjskekxswesemm
The document provides instructions for removing and installing an engine from a Case machine. It describes 17 steps for removing the engine, which include disconnecting electrical connections, hydraulic and fuel lines, removing fasteners and lifting the engine out. When installing the engine, the instructions note to reverse the removal steps and perform tasks like bleeding the fuel system, filling and bleeding the cooling system, and checking for leaks.
Case cx500 c tier iii crawler excavator service repair manualfujjsefkskemme
The document is a service manual section about an engine. It provides specifications for the engine including displacement, power output, cooling system details, lubrication system details, dimensions, valve timing, and electrical system components. It also lists special tools needed for tasks like removing and installing cylinder liners.
Case cx230 b crawler excavator service repair manualfujjsefkskemme
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are provided for common fasteners.
More Related Content
Similar to Case cx145 csr tier 4 crawler excavator service repair manual
Case cx145 csr tier 4 crawler excavator service repair manualfjjskekksemmm
This document provides instructions for removing and installing an engine assembly. It outlines 15 steps including removing components like the battery cables, counterweight, muffler, pump, fan shroud, radiator hoses, wiring harnesses, and air conditioning lines. Safety warnings are provided and tools needed are listed. Torque specifications are given for reinstalling components.
Case cx210 c tier 4 crawler excavator service repair manualfjjskekksemmm
This document is a service manual section for the CX210C Tier 4 crawler excavator. It provides specifications for the excavator such as its dimensions, weight, engine information, hydraulic system specifications, and standard torque data for bolts and nuts. The document instructs technicians on safety procedures, cleaning and inspecting components, and not modifying parts that could impact the ROPS safety rating. It also provides judging criteria to determine if a machine's weight and boom position meet ROPS safety standards.
Case cx160 c tier 4 crawler excavator service repair manualfjjskekksemmm
This document provides safety information and instructions for servicing a CX160C Tier 4 Crawler Excavator. It discusses general procedures for cleaning, inspection, bearings, gears, seals, shafts and service parts. It also provides warnings and safety precautions for working on and around heavy equipment. Standard torque data and ROPS criteria for various excavator models are included.
Case cx470 c tier 4 crawler excavator service repair manualfjjskekfsem
The document provides instructions for removing the engine assembly from a Case CX470C crawler excavator. It lists the necessary tools and parts, and outlines 14 steps to drain fluids, remove hoses, covers, and bolts to fully separate the engine from the excavator. Safety warnings are provided throughout regarding fire hazards, high pressure gases, sparks near batteries, suspended loads, and ensuring hydraulic pressure is released before working on the machine.
Case cx350 c tier 4 crawler excavator service repair manualfjjskekfsem
The document provides instructions for removing and installing an engine assembly from a crawler excavator. Key points include:
1) Drain engine oil and coolant before removal. Disconnect hoses, wires, and other connections between the engine and other components.
2) Use lifting equipment like shackles and a crane to lift the engine assembly out once it is detached.
3) To install, reverse the removal process and reattach all hoses, wires and other connections. Refill fluids and bleed lines as needed. Check for leaks once installed.
Case cx330 crawler excavator service repair manualfujjsekfkksekm
The document provides instructions for cleaning, inspecting, and maintaining various components of a machine. It describes cleaning procedures for metal parts, bearings, and oil passages. It also describes inspection procedures to check for wear and damage of parts like bearings, gears, shafts, and to replace any worn parts. The document instructs to use genuine replacement parts and the specified oils and lubricants. It provides safety warnings and cautions to be followed when servicing the machine.
Case cx330 crawler excavator service repair manualfujsjefkskemm
This document provides instructions for cleaning, inspecting, and replacing various parts when servicing heavy machinery. It emphasizes cleaning all metal parts with solvent and drying thoroughly before lubricating. All parts that show wear or damage should be replaced. Bearings should be cleaned in solvent and air dried, not with compressed air. The instructions also provide safety warnings and procedures for removing and installing the engine.
Kawasaki 135ZV WHEEL LOADER Service Repair Manual (Serial No. 13C-10201 and u...f7sejkddjmdkm
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Referring to these factors and values can help ensure bolts are properly tightened during reassembly to avoid issues like loosening over time.
Kawasaki 135ZV WHEEL LOADER Service Repair Manual (Serial No. 13C-10201 and u...uwbt828229
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Refer to the table to determine the appropriate tightening torque range for a given bolt based on these specifications. Be sure not to under or over tighten bolts from the recommended torque range to avoid issues.
Kawasaki 135ZV WHEEL LOADER Service Repair Manual (Serial No. 13C-10201 and u...f8uuseijdkmd3e
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Refer to the table to determine the appropriate tightening torque range for a given bolt based on these specifications. Be sure not to exceed the maximum torque limit to avoid damaging the bolt or threads.
Kawasaki 135ZV WHEEL LOADER Service Repair Manual (Serial No. 13C-10201 and u...jdksme9ddkkd
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Refer to the table to determine the appropriate tightening torque range for a given bolt based on these specifications. Be sure not to exceed the maximum torque limit to avoid damaging the bolt or threads.
Kawasaki 135ZV WHEEL LOADER Service Repair Manual (Serial No. 13C-10201 and u...jdkskmmdmd
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Refer to the table to determine the appropriate tightening torque range for a given bolt based on these specifications. Be sure not to exceed the maximum torque limit to avoid damaging the bolt or threads.
Kawasaki 135 zv wheel loader service repair manual (serial no. 13c 10201 and up)fioskdmmd
The bolt tightening torque values provided in the table are for hexagon bolts with metric or unified thread standards. The values depend on factors like the bolt class/grade (8.8 or 10.9), nominal bolt diameter size, and thread pitch (coarse or fine). Refer to the table to determine the appropriate tightening torque range for a given bolt based on these specifications. Be sure not to exceed the maximum torque limit to avoid bolt or thread damage.
Kawasaki 135 zv wheel loader service repair manual (serial no. 13c 10201 and up)fjjsieskekfmmse
This document provides guidelines for maintaining various components of a machine. It recommends specific lubricants for different parts, including engine oil, transmission fluid, hydraulic fluid, and grease. It lists lubricant change intervals and specifications for coolant mixtures. Safety symbols are defined that will be used in repair manuals. Abbreviations used in manuals are also outlined. Maintaining the proper lubricants and coolant mixtures per these guidelines is important for machine performance and service life.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 50001 ...ufsikkdjskemds
The document provides instructions for removing the cylinder head from an engine. The steps include:
1. Removing the water-cooled EGR cooler and brackets.
2. Removing bolts for the exhaust manifold and loosening adjacent bolts.
3. Removing the cooling system bleeder hose and cable duct from the intake.
4. Removing cable ties for the cable harness and depressurizing the fuel system.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 1001 a...fjskekkwersmem
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator. It includes sections on safety, specifications, general maintenance, the engine, upper structure, lower structure and chassis, front attachment, hydraulic and electrical systems, and optional equipment. Safety instructions are provided at the beginning emphasizing the need to read all manuals fully and follow warnings and instructions for safe operation and maintenance. An overview of the engine section describes the main engine components. Procedures for replacing or removing the entire engine are also provided.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 1001 a...dufjdjskkemm
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator. It includes sections on safety, specifications, general maintenance, the engine, upper structure, lower structure and chassis, front attachment, hydraulic and electrical systems, and optional equipment. Safety instructions are provided at the beginning highlighting the importance of following warnings, instructions, and procedures to avoid death or serious injury while operating or servicing the machine. An overview of replacing or removing the engine is also given with notes on disconnecting various components and lifting points.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 50001 ...fjskekkwersmem
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator. It includes sections on safety, specifications, general maintenance, the engine, upper structure, lower structure and chassis, front attachment, hydraulic and electrical systems, and optional equipment. Safety instructions are provided at the beginning emphasizing the need to read all manuals fully and follow warnings and instructions for safe operation and maintenance. An overview of the engine section describes the main engine components. Procedures for replacing or removing the entire engine are also provided.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 1001 a...ufsikkdjskemds
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator, including:
- The engine section covers safety instructions and an overview of the engine components. It also provides instructions for replacing and removing the engine.
- Other sections cover the upper structure, lower structure and chassis, front attachment components, hydraulic and electrical systems, and optional equipment.
- Each section begins with safety messages and provides detailed instructions, diagrams and specifications for maintenance, repairs, and inspections of the various excavator systems and components.
Case cx330 crawler excavator service repair manualfjskekxswesemm
The document provides instructions for removing and installing an engine from a Case machine. It describes 17 steps for removing the engine, which include disconnecting electrical connections, hydraulic and fuel lines, removing fasteners and lifting the engine out. When installing the engine, the instructions note to reverse the removal steps and perform tasks like bleeding the fuel system, filling and bleeding the cooling system, and checking for leaks.
Similar to Case cx145 csr tier 4 crawler excavator service repair manual (20)
Case cx500 c tier iii crawler excavator service repair manualfujjsefkskemme
The document is a service manual section about an engine. It provides specifications for the engine including displacement, power output, cooling system details, lubrication system details, dimensions, valve timing, and electrical system components. It also lists special tools needed for tasks like removing and installing cylinder liners.
Case cx230 b crawler excavator service repair manualfujjsefkskemme
This document provides specifications and torque settings for a crawler excavator. It includes information on fluids and lubricants, serial numbers, dimensions, performance data, component weights, and more. Special instructions are given for engine oil, fuel, coolant, filters, and hydraulic systems. Torque values are provided for common fasteners.
Case cx290 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX290D Crawler Excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. The introduction emphasizes that all repair and maintenance work should only be performed by qualified dealership personnel using the proper instructions and tools. It notes that the manufacturer will not be responsible for damages caused by unauthorized parts or repairs.
Case cx210 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It contains sections on the engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork and decals. Repair and maintenance work should only be performed by qualified dealership personnel using the procedures in this manual and special tools as needed. The manufacturer is not responsible for damages caused by unauthorized parts or repairs.
Case cx290 crawler excavator service repair manualfujjsefkskemme
This document provides specifications and technical information for a Case construction machine. It includes sections on machine identification numbers, recommended fluids and lubricants, technical specifications, dimensions of track and attachment components, and special torque settings. Safety warnings are provided throughout advising technicians to follow proper procedures when servicing the machine.
Case cx260 c crawler excavator service repair manualfujjsefkskemme
This service manual provides maintenance and repair information for the CX260C crawler excavator. The manual is divided into sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms dippers and buckets, platform cab bodywork and decals. Safety precautions are provided to alert technicians to potential hazards when servicing equipment. The manual contains detailed technical information on maintenance and repairs needed to keep the excavator in proper working order.
Case cx240 b crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx210 b forestry machine crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any worn parts to prevent early failures. Standard torque values are provided for cap screws and nuts used in maintenance and repairs. Safety is emphasized throughout servicing operations.
Case cx220 c hydraulic excavator service repair manualfujjsefkskemme
The document is a service manual for a CX220C Hydraulic Excavator. It provides instructions for removing and servicing the excavator's engine. The manual lists the necessary preparations before removing the engine, which include disconnecting electrical connections, removing hoses, guards, and other components. Detailed steps are provided for removing the engine, including disconnecting harness connectors to the engine and electronic control unit. Safety precautions are also outlined.
Case cx180 c tier iii crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX180C Crawler Excavator. It contains information on servicing and repairing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. Safety is emphasized, and only qualified dealership personnel should perform repairs following the procedures in the manual. The manual provides specifications to service the excavator accurately.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...fujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx180 c crawler excavator service repair manualfujjsefkskemme
The document is a service manual for a CX180C crawler excavator. It provides specifications and descriptions for the excavator's engine, including identification information, static descriptions of engine components, and specifications for the cooling, electrical, and fuel systems. The manual contains sections on troubleshooting engine issues and replacing engine components.
Case cx210 d long reach crawler excavator service repair manualfujjsefkskemme
The document is a service manual that provides specifications and repair/maintenance instructions for CX210D and CX230D crawler excavators. It covers the engine, hydraulic systems, frames, tracks, cab climate control, electrical systems, booms/dippers/buckets, and cab/bodywork. The introduction section outlines safety rules for working on the equipment.
Case cx160 c crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX160C Crawler Excavator that contains instructions for repair and maintenance work. It warns that all work must be done by qualified dealership personnel according to the procedures to avoid damages. The manufacturer is not responsible for damages caused by unauthorized parts. Specifications in the manual are subject to change without notice. Refer any questions to CASE CONSTRUCTION Sales and Service Networks.
Case cx210 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 c crawler excavator service repair manualfujjsefkskemme
This document is a service manual for a CX210C crawler excavator. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. Each section includes subsections that provide instructions for repair and maintenance of specific components. The introduction emphasizes that all repair and maintenance work must be carried out by qualified dealership personnel strictly following the procedures in the manual.
Case cx210 b crawler excavator service repair manualfujjsefkskemme
This document provides safety information, general maintenance guidelines, and standard torque specifications for servicing crawler excavators. It instructs technicians to clean all metal parts except bearings using a cleaning solvent or steam cleaning. It also advises checking all parts for wear or damage when disassembled and replacing any parts that are worn or damaged. Technicians are instructed to inspect bearings for easy rotation and replace any bearings that are rough or damaged. Standard torque values are provided for cap screws and nuts used in maintenance and repairs.
Case ck25 crawler excavator service repair manualfujjsefkskemme
The document provides instructions for removing and installing the engine on CK25-CK28 Crawler Excavators. It outlines 7 steps: 1) Park the machine and lower attachments; 2) Disconnect the battery; 3) Remove the cab or canopy; 4) Remove engine protector bolts; 5) Remove the hydraulic oil reservoir; 6) Drain the coolant by opening the radiator drain valve; 7) Remove hood mounting bolts from the engine compartment. Reinstallation follows the removal steps in reverse order.
Case 1188 crawler excavator service repair manualfujjsefkskemme
This document provides a table of contents for a manual on 1188 Hydraulic Wheeled and Crawler Excavators. The table lists 9 sections and various subsections on topics such as the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upperstructure. Reference numbers are provided for each subsection for locating additional detailed information.
Case cx160 b crawler excavator service repair manualfujjsefkskemme
Here are the recommended engine oils for different ambient temperatures:
- Above 0°C (32°F):
CASE/AKCELA MULTIGRADE "No. 1 ENGINE OIL" SAE 15W-40, API CF-4 or CG-4
- Below 0°C (32°F):
CASE/AKCELA MULTIGRADE "No. 1 ENGINE OIL" SAE 5W-30, API CF-4 or CG-4
- Extreme cold temperatures:
CASE/AKCELA MULTIGRADE "No. 1 ENGINE OIL" SAE 0W-30, API CF-4 or CG-4
The CASE/AKCELA
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
3. Safety, general information and standard torque data
GENERAL INFORMATION
CLEANING
Clean all metal parts except bearings, in a suitable cleaning solvent or by steam cleaning.
Do not use caustic soda for steam cleaning.
After cleaning, dry and put oil on all parts.
Clean oil passages with compressed air.
Clean bearings in a suitable cleaning solvent,
dry the bearings completely and put oil on the bearings.
INSPECTION
Check all parts when the parts are disassembled.
Replace all parts that have wear or damage.
Small scoring or grooves can be removed with a hone or crocus cloth.
Complete a visual inspection for indications of wear, pitting and the replacement of parts necessary to prevent early
failures.
BEARINGS
Check bearings for easy action.
If bearings have a loose fit or rough action replace the bearing.
Wash bearings with a suitable cleaning solvent and permit to air dry.
DO NOT DRY BEARINGS WITH COMPRESSED AIR.
NEEDLE BEARINGS
Before you press needle bearings in a bore always remove any metal protrusions in the bore or edge of the bore.
Before you press bearings into position put petroleum jelly on the inside and outside diameter of the bearings.
GEARS
Check all gears for wear and damage.
Replace gears that have wear or damage.
Oil seals, O-rings and gaskets.
Always install new oil seals, O-rings and gaskets.
Put petroleum jelly on seals and O-rings.
SHAFTS
Check all shafts that have wear or damage.
Check the bearing and oil seal surfaces of the shafts for damage.
SERVICE PARTS
Always install genuine Case service parts.
When ordering refer to the
Parts Catalogue for the correct part number of the genuine Case replacement items.
Failures due to the use of other than genuine Case replacement parts are not covered by warranty.
LUBRICATION
Only use the oils and lubricants specified in the Operator’s or Service Manuals.
Failures due to the use of non-specified oils and lubricants are not covered by warranty.
47395870A NA - June 2012
1001-3
4. Safety, general information and standard torque data
Safety
This symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED.
The message that follows the symbol contains important information about safety.
Carefully read the message.
Make sure you fully understand the causes of possible injury or death.
To prevent injury always follow the Warning, Caution and Danger notes in this section and throughout the manual.
Put the warning tag shown below on the key for the key switch when servicing or repairing the machine.
One warning tag is supplied with each machine.
Additional tags are available from your service parts supplier.
WARNING
Read the operator's manual to familiarize yourself with the correct control functions.
WARNING
Operate the machine and equipment controls from the seat position only.
Any other method could result in serious injury.
WARNING
This is a one man machine, no riders allowed.
WARNING
Before starting engine, study Operator’s Manual safety messages.
Read all safety signs on machine.
Clear the area of other persons.
Learn and practice safe use of controls before operating.
It is your responsibility to understand and follow manufacturers instructions on machine operation, ser-
vice and to observe pertinent laws and regulations.
Operator's and Service Manuals may be obtained from your CASE dealer.
WARNING
If you wear clothing that is too loose or do not use the correct safety equipment for your job, you can
be injured.
Always wear clothing that will not catch on objects.
Extra safety equipment that can be required includes hard hat, safety shoes, ear protection, eye or face
protection, heavy gloves and reflector clothing.
WARNING
When working in the area of the fan belt with the engine running, avoid loose clothing if possible, and
use extreme caution.
WARNING
When doing checks and tests on the equipment hydraulics, follow the procedures as they are written.
DO NOT change the procedure.
WARNING
When putting the hydraulic cylinders on this machine through the necessary cycles to check operation
or to remove air from a circuit, make sure all people are out of the way.
WARNING
Use insulated gloves or mittens when working with hot parts.
47395870A NA - June 2012
1001-4
5. Safety, general information and standard torque data
WARNING
Lower all attachments to the ground or use stands to safely support the attachments before you do any
maintenance or service.
WARNING
Pin sized and smaller streams of hydraulic oil under pressure can penetrate the skin and result in serious
infection.
If hydraulic oil under pressure does penetrate the skin, seek medical treatment immediately.
Maintain all hoses and tubes in good condition.
Make sure all connections are tight.
Make a replacement of any tube or hose that is damaged or thought to be damaged.
DO NOT use your hand to check for leaks, use a piece of cardboard or wood.
WARNING
When removing hardened pins such as a pivot pin, or a hardened shaft, use a soft head (brass or bronze)
hammer or use a driver made from brass or bronze and a steel head hammer.
WARNING
When using a hammer to remove and install pivot pins or separate parts using compressed air or using
a grinder, wear eye protection that completely encloses the eyes (approved goggles or other approved
eye protectors).
WARNING
Use suitable floor (service) jacks or chain hoist to raise wheels or tracks off the floor.
Always block machine in place with suitable safety stands.
WARNING
When servicing or repairing the machine, keep the shop floor and operator's compartment and steps
free of oil, water, grease, tools, etc.
Use an oil absorbing material and/or shop cloths as required.
Use safe practices at all times.
WARNING
Some components of this machine are very heavy.
Use suitable lifting equipment or additional help as instructed in this Service Manual.
WARNING
Engine exhaust fumes can cause death.
If it is necessary to start the engine in a closed place, remove the exhaust fumes from the area with an
exhaust pipe extension.
Open the doors and get outside air into the area.
WARNING
When the battery electrolyte is frozen, the battery can explode if (1), you try to charge the battery, or (2),
you try to jump start and run the engine.
To prevent the battery electrolyte from freezing, try to keep the battery at full charge.
If you do not follow these instructions, you or others in the area can be injured.
47395870A NA - June 2012
1001-5
6. Safety, general information and standard torque data
ROPS Judgment Method
1. Purpose
Check against the ROPS judgment criteria to judge whether the machine satisfies the ROPS criteria or not.
The weight and boom of the machine greatly effects whether the ROPS judgment criteria is satisfied or not.
The ROPS test assumes that the weight being used is the weight of the machine when the maximum number of
selectable options are mounted (as of 2009).
However, depending on the derivative machinery or the order details, the weight and boom position may differ
from the assumed weight or position.
2. Criteria for judging whether a machine satisfies the ROPS criteria
1) Weight
The weight must not be over the weight shown below for each class.
If the weight is exceeded, there is a danger that the cab could be damaged and the operator could die or
sustain a serious injury when the machine falls over.
If the weight exceeds the stipulated weight, the machine will not satisfy the ROPS criteria.
• Weight (X3 model)
To satisfy the ROPS criteria, the weight must not be over the indicated weight. (The below weights are
the weights indicated on the nameplate within the ROPS cab)
Machine body total weight Class
16000 kg (35274.146 lb) or less
CX75C
CX145C
20500 kg (45195.000 lb) or less
CX130C
CX160C
CX180C
28000 kg (61729.756 lb) or less CX235C
31000 kg (68343.658 lb) or less
CX210C
CX250C
CX250C LR
CX300C
40000 kg (88185.365 lb) or less CX370C
50000 kg (110231.707 lb) or less CX470C
* The ROPS test assumes that the CX470C has a cage guard (alone).
Machine body total weight Class
16000 kg (35274.146 lb) or less
CX75C
CX145C
20500 kg (45195.000 lb) or less
CX130C
CX160C
CX180C
28000 kg (61729.756 lb) or less CX235C
31000 kg (68343.658 lb) or less
CX210C
CX250C
CX250C LR
CX300C
50000 kg (110231.707 lb) or less CX470C
* The ROPS test assumes that the CX470C has a cage guard (alone).
• Weight (X2 model)
To satisfy the ROPS criteria, the weight must not be over the indicated weight. (The below weights are
the weights indicated on the nameplate within the ROPS cab)
Machine body total weight Class
26600 kg (58643.268 lb) or less
CX130B
CX160B
CX180B
CX210B
CX240B
47395870A NA - June 2012
1001-6
7. Safety, general information and standard torque data
2) Boom position
WARNING
• If the machine has been modified so that the boom position has been lowered, the machine
will not satisfy the ROPS criteria.
• It is necessary to consult with our company if it is possible that the boom's position has been
lowered by modification.
• The extent to which a boom position has moved cannot be determined in the same way for
all machines.
a Ground point
With the tip of the bucket in contact with the ground surface at maximum work radius, if the position (* in the
diagram) that overlaps with the cab when viewed from the side is markedly lower than that of a standard
machine (standard arm), the machine will not satisfy the ROPS criteria.
Also, with a machine body with a cab mounted that can withstand up to 31 tons, the effect of mounting a
24 ton machine, which is near the restriction weight, and a 21 ton machine to the same cab will not be the
same.
3. Prohibited items
• Modifications that reduce the strength of a platform that has a cab with a ROPS mounted to it. (Actions or
modifications that reduce the functionality of the anchoring part at the left-rear of the cab)
• Modifications that effect the strength of the ROPS of a cab.
A forbidden all
modifications
(red part)
All modifications (grinding, welding, drilling holes, removing, etc.) are prohib-
ited.
Allow under spec-
ified conditions
(gray part)
Removal of parts is prohibited.
Bar welding and making holes [up to diameter 20 mm (0.787 in)] by drilling
are possible.
47395870A NA - June 2012
1001-7
9. Removal and Installation of Engine Assembly
WARNING
• Keep away from fire.
• Be sure to release hydraulic pressure before
beginning work.
• The air conditioner circuit is filled with high-
pressure gas, so beware of the gas released
when loosening lines.
• Do not use open flames and do not allow
sparks near the battery.
CAUTION
• Be sure to stop the engine before beginning
work.
• Be sure to inspect the wire rope and other
lifting equipment before beginning work.
• Do not stand or pass under the suspended
load.
Items to prepare
• Wrenches [7 mm (0.276 in), 10 mm (0.394 in), 13 mm
(0.512 in), 14 mm (0.551 in), 17 mm (0.669 in), 19 mm
(0.748 in), 36 mm (1.417 in)]
• Box wrench [24 mm (0.945 in)]
• Shackle (with the required lifting capacity) x 2
• Wire rope (with the required breaking load)
• Crane (with the required lifting capacity)
• Pliers
• Marking pen
• Caps
• Plugs
• Rag
• Cleaning fluid
• Wood planks, etc.
Removal of Engine Assembly
1. Use a wrench [17 mm (0.699 in)] to remove the bolt
(1), and then remove the battery cable (2) on the
negative side.
• After removing the terminal and harness, secure
them so that they do not interfere with the frame
and other parts.
Also, cover with a rubber cap to protect against
sparks.
• Tightening torque for bolt installation: [10.6 - 13.0
N·m (7.82 - 9.59 lbf·ft)]
2. Remove the counterweight.
For details, see "Removal and Installation of Coun-
terweight".
3. Remove the muffler.
For details, see "Removal and Installation of Muf-
fler".
4. Remove the pump.
For details, see "Removal and Installation of Hy-
draulic Pump".
5. Use a wrench [19 mm (0.748 in)] to remove the bolt
(1), use a wrench [7 mm (0.276 in)] to loosen the
hose bands (2) (3), and then remove the intercooler
hose (high-temperature side) (4) and hose (5) from
the air cleaner.
• Tightening torque for band (2) installation: [8.8 -
9.8 N·m (6.49 - 7.23 lbf·ft)]
• Tightening torque for band (3) installation: [6.3 -
7.3 N·m (4.65 - 5.39 lbf·ft)]
47395870A NA - June 2012
2000-3
10. Removal and Installation of Engine Assembly
6. Loosen the hose bands (1), and then remove the
intercooler hose (low-pressure side) (2).
• Tightening torque for hose band (2) installation:
[8.8 - 9.8 N·m (6.49 - 7.23 lbf·ft)]
7. Use a wrench [14 mm (0.551 in)] to remove the bolts
(1) (2), and then remove the fan shroud (3).
8. Use a wrench to remove the bolts (1), and then re-
move the fan guard (2).
9. Use a wrench [7 mm (0.276 in)] to loosen the radia-
tor hose bands (1) in 2 locations, and then remove
the upper hose (2) and lower hose (3).
• Use caps to cover the radiator and hoses to pre-
vent any entry of water, dust or dirt.
• Before removing the radiator hose, completely
drain the coolant.
• Tightening torque for band (1) installation: [4.9 -
5.9 N·m (3.615 - 4.352 lbf·ft)]
47395870A NA - June 2012
2000-4
11. Removal and Installation of Engine Assembly
10. Use a wrench [13 mm (0.512 in)] to remove the 2
bolts (1), and then remove the connector brackets
(2).
11. Use a wrench [13 mm (0.512 in)] to remove the hose
bands (1) in 2 locations from the bracket, and then
remove the 5 connectors (2).
• Wrap the removed connectors in plastic after tying
them together.
• Tightening torque for bolt installation: [21.6 - 37.2
N·m (15.93 - 27.44 lbf·ft)]
12. Remove the connector (1) from the air conditioner
compressor.
13. Use a wrench [13 mm (0.512 in)] to remove the bolt
(1), and then remove the terminal cap (2).
Use a wrench to remove the wiring (3) (4) from the
starter.
Use a wrench [17 mm (0.669 in)] to remove the bolt
(5), and then remove the wiring (6) from the frame.
14. Use a wrench [10 mm (0.394 in)] to remove the bolts
(1).
Remove the connector (2) from the alternator.
Use a wrench to remove the wiring (3) from the al-
ternator.
15. Use a wrench [13 mm (0.512 in)] to loosen the line
bolts (1) in 2 locations, and then remove the lines
(2) (3) from the compressor.
• Always remove the low-pressure (suction side)
line (2) first.
• Install caps or plugs to the compressor and lines
to prevent any entry of water, dust or dirt.
• Tightening torque for bolt (1) installation: [20 - 25
N·m (14.75 - 18.44 lbf·ft)]
47395870A NA - June 2012
2000-5
12. Removal and Installation of Engine Assembly
16. Loosen the hose bands (1) in 2 locations, and then
remove the heater hoses (2) (3).
• Install caps or plugs to the engine and hoses to
prevent any entry of water, dust or dirt.
17. Prepare the waste oil can (1).
• Drain the engine oil before removing the engine
oil hose.
Use a wrench [36 mm (1.417 in)] to remove the 2
engine oil remote hoses (1).
• Mark the engine and hoses so that the connectors
match at the time of assembly.
• Install caps or plugs to the engine and hoses to
prevent any entry of water, dust or dirt.
• Clean the engine and hoses by spraying them
with a parts cleaner to prevent scratches and pre-
vent dirt from accumulating on the connectors.
• Tightening torque for installation: [54.1 - 63.9 N·m
(39.91 - 47.14 lbf·ft)]
18. Remove the hose bands (1), and then remove the
fuel hoses (2).
• Install caps or plugs to the engine and hoses to
prevent any entry of water, dust or dirt.
19. Install the 2 shackles (1), then use the wire rope (2)
and liftcrane to secure the engine main unit.
47395870A NA - June 2012
2000-6
13. Removal and Installation of Engine Assembly
20. Use a box wrench [24 mm (0.945 in)] to remove the
4 bolts (1) from the mount.
• Tightening torque for bolt installation: [264.9 -
313.9 N·m (195.41 - 231.56 lbf·ft)]
21. Use the wire rope (1) and liftcrane to lift the engine
main unit.
• Be sure to check all hoses and connectors for any
disconnections before lifting.
Thoroughly check that the location is safe before
lowering the engine on wood planks, etc.
• Thoroughly secure the engine so that it does not
fall over.
Installation of Engine Assembly
1. To install the engine, perform the reverse of the re-
moval procedure.
After installing the engine, resupply coolant and en-
gine oil, perform fuel line air bleeding, and perform
filling for the air conditioner gas.
For details, see the individual explanations for each
procedure.
2. Run the engine at no-load idling and check for any
water or oil leaks.
3. Attach the hydraulic pump, covers, and counter-
weight.
For details, see the individual explanations for each
procedure.
47395870A NA - June 2012
2000-7
14. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
Removal and Installation of Fuel
Cooler
CAUTION
• Be sure to stop the engine before beginning
work.
• As the fuel hose will be removed, strictly pro-
hibit open flames.
Items to prepare
• Wrenches [13 mm (0.512 in)]
• Screwdriver
• Pliers
• Marking pen
• Cap
• Plug
• Rag
• Cleaning fluid
• Drip pan
Removal of Fuel Cooler
1. Mark the fuel cooler (5) and hoses (1) (2) so that the
connectors match at the time of assembly.
• Use pliers to loosen the hose bands (3) (4), and
then remove the hoses.
• Fuel will spill out, so place a drip pan directly be-
low the area.
• Install caps or plugs to the fuel cooler and hoses
to prevent any entry of water, dust or dirt.
2. Use a wrench [13 mm (0.512 in)] to remove the 4
bolts (1), and then remove the fuel cooler (2).
47395870A NA - June 2012
2001-3
15. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
Installation of Fuel Cooler
Perform the reverse of the removal procedure.
After connecting the hoses, carefully check for any fuel
leaks.
When installing the bolts, tighten them to the specified
torque.
If the torque is not specified for a bolt or other part, see
the Bolt Size and Torque Table.
Removal and Installation of Engine
Intercooler
CAUTION
• Be sure to release the pressure within the cir-
cuit before beginning work.
• Be sure to stop the engine before beginning
work.
• Be sure to inspect the wire rope and other
lifting equipment before beginning work.
• Do not stand or pass under the suspended
load.
Items to prepare
• Wrenches [7 mm (0.276 in), 8 mm (0.315 in), 13 mm
(0.512 in), 14 mm (0.551 in), 19 mm (0.748 in)]
• Box wrench [13 mm (0.512 in)]
• Pliers
• Shackles (with the required lifting capacity) x 2
• Wire rope (with the required breaking load)
• Liftcrane (with the required lifting capacity)
• Cap
• Plug
• Rag
• Cleaning fluid
• Wood planks, etc.
47395870A NA - June 2012
2001-4
16. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
Removal of Intercooler
• Remove the counterweight.(For details, see "Removal
and Installation of Counterweight".)
1. Use a wrench [13 mm (0.512 in)] to remove the 4
bolts (1), and then remove the cover (2) (3).
2. Use a box wrench [13 mm (0.512 in)] to remove the
7 bolts (1) from the radiator cover.
3. Use a wrench [7 mm (0.276 in)] to loosen the hose
band (1) in the 2 locations, and then remove the
upper hose (2) and lower hose (3) from the inter
cooler.
• Use caps to cover the intercooler and hoses to
prevent the entry of water, dust or dirt.
Tightening torque for band (1) installation: 8.8 -
9.8 N·m (6.492 - 7.229 lbf·ft)
4. Use a wrench [14 mm (0.551 in)] to remove the 3
bolts (1), and then remove the brackets (2).
47395870A NA - June 2012
2001-5
17. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
5. Use a wrench [14 mm (0.551 in)] to remove the 2
bolts (1), and then remove the fan guard (2).
6. Use a wrench [14 mm (0.551 in)] to remove the 3
bolts (1), and then remove the brackets (2).
Remove the bracket on the opposite side using the
same procedure.
7. Remove the 4 one-touch clips (1), and then remove
the front anti-insect net (2).
8. Use a wrench [13 mm (0.512 in)] to remove the bolt
(1), and washer (2).
9. Install the shackle (1) to the top of the radiator, and
then use the wire rope (2) and liftcrane to lift the inter
cooler.
10. Lift until the fixtures (1) at the bottom of the inter
cooler become disconnected.
47395870A NA - June 2012
2001-6
18. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
11. Thoroughly check that the location is safe before
lowering the inter cooler on square wooden piece.
When laying down the radiator, be careful not to
bend or crush the bottom fixtures (1).
Installation of Intercooler
To install, perform the reverse of the removal procedure.
Check for any air leaks.
When installing the bolts, tighten them to the specified
torque.
If the torque is not specified for a bolt or other part, see
the Bolt Size and Torque Table.
47395870A NA - June 2012
2001-7
19. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
Removal and Installation of
Radiator
WARNING
• Do not remove the radiator cap when the ra-
diator coolant temperature is high.
Hot liquid could spray out.
CAUTION
• Be sure to release the pressure within the cir-
cuit before beginning work.
• Be sure to stop the engine before beginning
work.
• Be sure to inspect the wire rope and other
lifting equipment before beginning work.
• Do not stand or pass under the suspended
load.
Items to prepare
• Wrenches [7 mm (0.276 in), 13 mm (0.512 in), 14 mm
(0.551 in), 17 mm (0.669 in)]
• Box wrench [13 mm (0.512 in)]
• Pliers
• Shackles (with the required lifting capacity) x 2
• Wire rope (with the required breaking load)
• Liftcrane (with the required lifting capacity)
• Cap
• Plug
• Drain tank
• Drain hose
• Rag
• Cleaning fluid
• Wood planks, etc.
Removal of Radiator
• Remove the counterweight.(For details, see "Removal
and Installation of Counterweight".)
1. Use a wrench [17 mm (0.669 in)] to remove the 4
bolts (1), and then remove the under cover (2).
2. Install the drain hose (1), and then prepare the drain
tank (2).
3. To make it easier to drain the coolant, remove the
radiator cap (1).
47395870A NA - June 2012
2001-8
20. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
4. Loosen the drain plug (1), and then drain the
coolant.
5. Use a wrench [13 mm (0.512 in)] to remove the 4
bolts (1), and then remove the covers (2) (3).
6. Use a box wrench [13 mm (0.512 in)] to remove the
7 bolts (1) from the radiator cover.
7. Use a wrench [7 mm (0.267 in)] to loosen the hose
bands (1) in the 2 locations, use a wrench [13 mm
(0.512 in)] to remove the bolt (2), and then remove
the upper hose (3) and lower hose (4) from the ra-
diator.
• Use caps to cover the radiator and hoses to pre-
vent the entry of water, dust or dirt.
• Tightening torque for band (1) installation: 4.9 -
5.9 N·m (3.615 - 4.352 lbf·ft)
8. Remove the drain plug (1), loosen the hose band
(2), and then remove the hose (3).
47395870A NA - June 2012
2001-9
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
9. Loosen the hose band (2), and then remove the
hose (1) from the radiator cap.
• Install caps or plugs to the hoses to prevent any
entry of water, dust or dirt.
10. Use a wrench [14 mm (0.551 in)] to remove the 3
bolts (1), and then remove the brackets (2).
11. Use a wrench [14 mm (0.551 in)] to remove the 2
bolts (1), and then remove the fan guard (2).
12. Use a wrench [14 mm (0.551 in)] to remove the 3
bolts (1), and then remove the brackets (2).
Remove the bracket on the opposite side using the
same procedure.
13. Remove the 4 one-touch clips (1), and then remove
the front anti-insect net (2).
14. Use a wrench [13 mm (0.512 in)] to remove the 2
bolts (1), the 2 washers (2).
47395870A NA - June 2012
2001-10
23. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
15. Install the 2 shackles (1) to the top of the radiator,
and then use the wire rope (2) and liftcrane to lift the
radiator.
16. Lift until the fixtures (1) at the bottom of the radiator
become disconnected.
17. Thoroughly check that the location is safe before
lowering the radiator on square wooden piece.
When laying down the radiator, be careful not to
bend or crush the bottom fixtures (1).
Installation of Radiator
To install, perform the reverse of the removal procedure.
Tighten bolts being installed to the specified torque.
If the torque is not specified, see the "Bolt Size and
Torque Table".
Coolant capacity is 16.2 L (4.280 gal).
Finally, check that the level of coolant is correct.
47395870A NA - June 2012
2001-11
24. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
Removal and Installation of Oil
Cooler
WARNING
• Keep away from fire.
CAUTION
• Be sure to stop the engine before beginning
work.
• Be sure to inspect the wire rope and other
lifting equipment before beginning work.
• Do not stand or pass under the suspended
load.
Items to prepare
• Wrenches [7 mm (0.276 in), 13 mm (0.512 in), 17 mm
(0.669 in)]
• Hexagon wrench [6 mm (0.236 in)]
• Pliers
• Screwdriver
• Eyebolts x 2
• Shackles (with the required lifting capacity) x 2
• Wire rope (with the required breaking load)
• Liftcrane (with the required lifting capacity)
• Cap
• Waste oil can
• Rag
• Cleaning fluid
• Wood planks, etc.
Removal of Oil Cooler
• Drain the hydraulic oil from the hydraulic oil tank.
See Draining Oil from Hydraulic Oil Tank for details of
the procedure.
1. Use a wrench [17 mm (0.669 in)] to remove the 4
bolts (1), and then remove the under cover (2).
2. Prepare the waste oil can (1).
3. Use a wrench [13 mm (0.512 in)] to remove the 4
bolts (1), and then remove the cover (2) (3).
47395870A NA - June 2012
2001-12
25. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
4. Remove the 2 one-touch clips (1), and then remove
the anti-insect net (2).
5. Use a wrench [7 mm (0.276 in)] to loosen the hose
band (1), and then remove the hose (2).
• Use caps to cover the oil cooler and lines to pre-
vent the entry of water, dust or dirt.
6. Use a hexagon wrench [6 mm (0.236 in)] to remove
the 4 bolts (1), and then remove the lines (2).
• Use caps to cover the oil cooler and lines to pre-
vent the entry of water, dust or dirt.
7. Use a wrench [13 mm (0.512 in)] to remove the 4
bolts (1).
8. Install the 2 eyebolts (1) on the top of the oil cooler.
• Fully tighten the eyebolts, and then loosen them
by a half turn.
47395870A NA - June 2012
2001-13
26. Removal and installation of the fuel cooler engine inter-cooler
radiator and oil cooler
9. Install the 2 shackles (1) to the eyebolts, and then
use the wire rope (2) and liftcrane to lift the oil cooler
main unit.
• When lifting the oil cooler unit, be careful not to
let the line on the bottom of the oil cooler catch on
the fan shroud.
10. Thoroughly check that the location is safe before
lowering the oil cooler on wood planks, etc.
Installation of oil cooler
To install, perform the reverse of the removal procedure.
Tighten bolts being installed to the specified torque.
If the torque is not specified, see the "Bolt Size and
Torque Table".
The O-rings cannot be reused.
Replace them with new parts.
47395870A NA - June 2012
2001-14