The document outlines numerous safety rules and precautions to follow when operating machinery, including studying safety manuals, ensuring proper protective equipment is worn, following start-up and operational procedures cautiously, and being aware of potential hazards. Operators must understand machine limitations and not take risks such as overloading or operating in unsafe conditions. Adhering to the safety guidelines is essential to protect both the operator and others near the work area from injury.
Case 2550 crawler dozer service repair manualfujsjefjskkem
The document provides safety instructions for operating machinery. It emphasizes reading safety rules thoroughly and following all warnings, cautions and precautions to avoid risks and ensure safety. Some key safety tips include wearing proper protective equipment, keeping the operating area clear of people and debris, avoiding loose or slippery surfaces, and not operating unsafe or damaged equipment. It stresses the importance of staying seated inside the operator compartment at all times during operation.
Case 2550 crawler dozer service repair manual instant downloadufdjjskekfkskem
The document provides safety rules for operating and maintaining machinery. It emphasizes reading safety instructions, wearing proper protective equipment, ensuring the work area is clear before starting the machine, following proper startup and shutdown procedures, operating safely on slopes and uneven terrain, parking in safe locations, and only allowing authorized personnel to perform maintenance. Failure to follow the safety rules could result in health risks or accidents.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810005 and upfdjjjsekkskemm
This operator's manual provides safety instructions and information for operating a compact excavator. It warns that failure to understand and follow the instructions can result in injury or death. It outlines general safety precautions including wearing protective equipment, using signals, and not removing safety guards. Starting precautions include maintaining three points of contact, clearing the area, and starting from the operator's seat. Operating safely requires being aware of the work area, performing inspections, and not putting body parts at risk of being crushed or cut.
NEW HOLLAND D150 CRAWLER DOZER Service Repair Manualhfjskefkmdm
This is the Highly Detailed factory service repair manual for theNEW HOLLAND D150 CRAWLER DOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.NEW HOLLAND D150 CRAWLER DOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Generalities
Engine
Transmission
Final Drives
Brakes and Steering Differential
Undercarriage
Dozer Equipment Hydraulic System
Electrical System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveNEW HOLLAND D150 CRAWLER DOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
New holland d255 crawler dozer service repair manualdueikdkmem
This service manual provides instructions for maintenance and repair of a crawler dozer. It begins with safety rules to follow when operating or servicing the machine. The manual is divided into 8 sections covering the generalities, engine, transmission, steering/brakes, final drives, undercarriage, dozer equipment, hydraulic system, and electrical system. Each section contains detailed information, diagrams, and specifications to guide maintenance and repairs. Safety is emphasized throughout, with warnings to block equipment, avoid loose clothing near moving parts, and more.
New holland d150 crawler dozer service repair manualfusjjfkskemem
This document provides safety rules and instructions for operating heavy machinery such as dozers, loaders, and excavators. It warns of dangers like explosive fuels, moving parts that can catch clothing or jewelry, and the risks of overturning. Operators are instructed to thoroughly check the machine for safety issues, not to operate from any position other than the seat, and to beware of hazards near the machine like unstable terrain or other workers. Proper protective equipment is also emphasized.
New holland dc150 crawler dozer service repair manual instant downloadujjdfjkkskedmmed
This document provides the service manual for the Dozer Crawlers DC150 model, including safety rules and precautions for operation and maintenance. It details specifications and technical data for the engine, transmission, hydraulics, electrical systems, undercarriage, and other components. Instructions are given for troubleshooting issues and performing maintenance safely.
Fiat kobelco d350 crawler dozer service repair manualjfdjskmdmme
This document is a workshop manual that provides safety rules and instructions for maintaining a D350 Power Steering machine. It begins with several pages of important safety rules to follow when operating, maintaining or repairing the machine. The document is organized by technical sections covering the generalities, engine, transmission, final drives, brakes and steering differential, undercarriage, dozing equipment, hydraulic system, and electrical system of the machine. Diagrams are provided showing the main components.
Case 2550 crawler dozer service repair manualfujsjefjskkem
The document provides safety instructions for operating machinery. It emphasizes reading safety rules thoroughly and following all warnings, cautions and precautions to avoid risks and ensure safety. Some key safety tips include wearing proper protective equipment, keeping the operating area clear of people and debris, avoiding loose or slippery surfaces, and not operating unsafe or damaged equipment. It stresses the importance of staying seated inside the operator compartment at all times during operation.
Case 2550 crawler dozer service repair manual instant downloadufdjjskekfkskem
The document provides safety rules for operating and maintaining machinery. It emphasizes reading safety instructions, wearing proper protective equipment, ensuring the work area is clear before starting the machine, following proper startup and shutdown procedures, operating safely on slopes and uneven terrain, parking in safe locations, and only allowing authorized personnel to perform maintenance. Failure to follow the safety rules could result in health risks or accidents.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810005 and upfdjjjsekkskemm
This operator's manual provides safety instructions and information for operating a compact excavator. It warns that failure to understand and follow the instructions can result in injury or death. It outlines general safety precautions including wearing protective equipment, using signals, and not removing safety guards. Starting precautions include maintaining three points of contact, clearing the area, and starting from the operator's seat. Operating safely requires being aware of the work area, performing inspections, and not putting body parts at risk of being crushed or cut.
NEW HOLLAND D150 CRAWLER DOZER Service Repair Manualhfjskefkmdm
This is the Highly Detailed factory service repair manual for theNEW HOLLAND D150 CRAWLER DOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.NEW HOLLAND D150 CRAWLER DOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Generalities
Engine
Transmission
Final Drives
Brakes and Steering Differential
Undercarriage
Dozer Equipment Hydraulic System
Electrical System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveNEW HOLLAND D150 CRAWLER DOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
New holland d255 crawler dozer service repair manualdueikdkmem
This service manual provides instructions for maintenance and repair of a crawler dozer. It begins with safety rules to follow when operating or servicing the machine. The manual is divided into 8 sections covering the generalities, engine, transmission, steering/brakes, final drives, undercarriage, dozer equipment, hydraulic system, and electrical system. Each section contains detailed information, diagrams, and specifications to guide maintenance and repairs. Safety is emphasized throughout, with warnings to block equipment, avoid loose clothing near moving parts, and more.
New holland d150 crawler dozer service repair manualfusjjfkskemem
This document provides safety rules and instructions for operating heavy machinery such as dozers, loaders, and excavators. It warns of dangers like explosive fuels, moving parts that can catch clothing or jewelry, and the risks of overturning. Operators are instructed to thoroughly check the machine for safety issues, not to operate from any position other than the seat, and to beware of hazards near the machine like unstable terrain or other workers. Proper protective equipment is also emphasized.
New holland dc150 crawler dozer service repair manual instant downloadujjdfjkkskedmmed
This document provides the service manual for the Dozer Crawlers DC150 model, including safety rules and precautions for operation and maintenance. It details specifications and technical data for the engine, transmission, hydraulics, electrical systems, undercarriage, and other components. Instructions are given for troubleshooting issues and performing maintenance safely.
Fiat kobelco d350 crawler dozer service repair manualjfdjskmdmme
This document is a workshop manual that provides safety rules and instructions for maintaining a D350 Power Steering machine. It begins with several pages of important safety rules to follow when operating, maintaining or repairing the machine. The document is organized by technical sections covering the generalities, engine, transmission, final drives, brakes and steering differential, undercarriage, dozing equipment, hydraulic system, and electrical system of the machine. Diagrams are provided showing the main components.
NEW HOLLAND D255 CRAWLER DOZER Service Repair Manualjhfjmsnen
This is the Highly Detailed factory service repair manual for theNEW HOLLAND D255 CRAWLER DOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.NEW HOLLAND D255 CRAWLER DOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Generalities
Engine
Transmission – Torque Converter
Steering Clutches –Brakes
Final Drives
Undercarriage
Dozer Equipment Hydraulic System
Electrical System
Air Conditioning Unit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveNEW HOLLAND D255 CRAWLER DOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
New holland lw230 b wheel loader service repair manualfujdjffjkskemme
This section provides identification data and general specifications for the Cummins series C engine used in the LW230.B wheel loader, including:
- The engine data plate provides the model, displacement, rated power and other key specifications.
- The fuel injection pump data plate includes the pump serial number and Bosch part numbers.
- The general engine specifications include its configuration, displacement, power ratings, torque curves, cooling requirements and other technical details.
Case 1850 k tier 3 crawler dozer service repair manualufjjjsefkskem
This document is a service manual for a 1850K Crawler Dozer. It contains several sections:
1. The document begins with important safety notices, warning the user to only allow authorized personnel to perform maintenance and repairs following the manufacturer's instructions.
2. It provides identification data and technical specifications for the 1850K Crawler Dozer, including dimensions, weights, fluids used, and performance data.
3. The document outlines general maintenance instructions and troubleshooting tips. It includes tables of measurement units and tightening torques.
4. The bulk of the document contains detailed sections on the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems
New holland d180 tier 3 crawler dozer service repair manual instant downloadfudjjskekemmme
This document provides safety instructions and technical specifications for operating a CRAWLER DOZER workshop manual. It outlines key safety warnings to avoid risks to personnel and emphasizes the importance of following maintenance and repair instructions. Technical data and dimensions are provided for D180 models, including engine information, fluid capacities, weights, and component specifications. The document stresses the need to strictly follow safety precautions to prevent accidents and ensure safe operation of the machinery.
New holland d180 tier 3 crawler dozer service repair manualujdfjjjdfkkskemm
This document provides safety instructions and technical specifications for operating a CRAWLER DOZER workshop manual. It outlines key safety warnings to avoid risks to personnel and emphasizes the importance of following maintenance and repair instructions. Technical data and dimensions are provided for D180 models, including engine information, fluid capacities, weights, and component specifications. The document stresses the need to strictly follow safety precautions to prevent accidents and ensure safe operation of the machinery.
New holland d150 crawler dozer service repair manualfjjsjekfkskekme
The document provides safety instructions for operating and maintaining a crawler dozer. It warns of dangers such as moving parts, exhaust fumes, and working on slopes. Operators must read all safety rules, wear proper protective equipment, and not endanger themselves or others. Thorough maintenance following the manufacturer's guidelines is also emphasized for safety.
This document provides safety information and guidelines for engineers servicing a machine. It describes various safety symbols used in the manual and outlines safety precautions to follow when performing maintenance, including wearing protective equipment, using the correct tools, stopping the engine before working, and securing any moving parts. The manual structure is also summarized.
Takeuchi tb240 mini excavator service repair workshop manual (serial no. 1241...jfdjjskfkksmemm
1) The document is a service manual that provides procedures for maintenance and repair of a machine for engineers who service it. It describes disassembly, assembly, inspection, troubleshooting and specifications.
2) The manual uses symbols to indicate parts like the serial number and provides the structure of the manual which includes sections on safety, service data, functions, disassembly/assembly and troubleshooting.
3) The manual provides safety precautions for maintenance personnel which include wearing protective gear, installing safety equipment, properly preparing the work area, and procedures to safely work on and around the machine.
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Engineers should refer to this manual during work to improve service. The manual structure consists of sections covering safety, service data, functions, disassembly/assembly, troubleshooting and the engine. Safety precautions include wearing protective equipment, installing safety devices, securing the work area and taking caution with hot or pressurized components.
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Engineers should refer to this manual during work to improve service. The manual structure includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and the engine. Safety precautions are outlined, such as wearing protective equipment and stopping the engine before maintenance. Cautions are also given for working with hot or pressurized components, batteries, and welding repairs.
CASE 2550 Crawler Dozer Service Repair Manual.pdffujsekdmdm4r
The document provides safety rules for operating and maintaining machinery. It emphasizes reading safety instructions, wearing proper protective equipment, ensuring the work area is clear before starting the machine, following proper startup and shutdown procedures, operating safely on slopes and uneven terrain, parking in safe locations, and only allowing authorized personnel to perform maintenance. Failure to follow the safety rules could result in health risks or accidents.
Case 2550 crawler dozer service repair manualufjsekksmemm
The document provides safety instructions for operating machinery. It emphasizes reading safety rules thoroughly and following all warnings, cautions and precautions to avoid risks and ensure safety. Operators must be properly trained, wear protective equipment, and keep the operating area clear of others. Machines must be inspected for safety before use and operated carefully at appropriate speeds according to conditions.
Case 2550 crawler dozer service repair manualfujsjfkkskem
The document provides safety rules for operating and maintaining machinery. It emphasizes reading safety instructions, wearing proper protective equipment, ensuring the work area is clear before starting the machine, following proper startup and shutdown procedures, operating safely on slopes and uneven terrain, parking in safe locations, and only allowing authorized personnel to perform maintenance. Failure to follow the safety rules could result in health risks or accidents.
CASE 3550 Crawler Dozer Service Repair Manual Instant Download.pdfsang1818141471
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual.pdff7usejkdkdmdmw2
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual.pdffujskekdjdmd
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual.pdfjnjn9464773
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual Instant Download.pdfgongyi2122252
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual.pdfhan647runken
This document is a service manual for a 3550 Crawler Dozer. It contains several sections: Generalities, Engine, Transmission, Final Drives, Brakes and Steering Differential, Undercarriage, Dozing Equipment, Hydraulic System, and Electrical System. The document provides many safety warnings and precautions to follow when operating, maintaining, or repairing the dozer. Personnel are instructed to read all safety information carefully and only perform maintenance if authorized and following all procedures.
CASE 3550 Crawler Dozer Service Repair Manual Instant Download.pdfnaoji181714047
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual.pdffujsekdmdm4r
This document is a service manual for a 3550 Crawler Dozer. It contains several sections: Generalities, Engine, Transmission, Final Drives, Brakes and Steering Differential, Undercarriage, Dozing Equipment, Hydraulic System, and Electrical System. The document provides many safety warnings and precautions to follow when operating, maintaining, or repairing the dozer. Personnel are instructed to read the safety rules carefully and only perform maintenance if authorized to do so.
CASE 3550 Crawler Dozer Service Repair Manual.pdffjksmmdmder
This document is a service manual for a 3550 Crawler Dozer. It contains several sections: Generalities, Engine, Transmission, Final Drives, Brakes and Steering Differential, Undercarriage, Dozing Equipment, Hydraulic System, and Electrical System. The document provides many safety warnings and precautions to follow when operating, maintaining, or repairing the dozer. Personnel are instructed to read the safety rules carefully and only perform maintenance if authorized to do so.
NEW HOLLAND D255 CRAWLER DOZER Service Repair Manualjhfjmsnen
This is the Highly Detailed factory service repair manual for theNEW HOLLAND D255 CRAWLER DOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.NEW HOLLAND D255 CRAWLER DOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Generalities
Engine
Transmission – Torque Converter
Steering Clutches –Brakes
Final Drives
Undercarriage
Dozer Equipment Hydraulic System
Electrical System
Air Conditioning Unit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveNEW HOLLAND D255 CRAWLER DOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
New holland lw230 b wheel loader service repair manualfujdjffjkskemme
This section provides identification data and general specifications for the Cummins series C engine used in the LW230.B wheel loader, including:
- The engine data plate provides the model, displacement, rated power and other key specifications.
- The fuel injection pump data plate includes the pump serial number and Bosch part numbers.
- The general engine specifications include its configuration, displacement, power ratings, torque curves, cooling requirements and other technical details.
Case 1850 k tier 3 crawler dozer service repair manualufjjjsefkskem
This document is a service manual for a 1850K Crawler Dozer. It contains several sections:
1. The document begins with important safety notices, warning the user to only allow authorized personnel to perform maintenance and repairs following the manufacturer's instructions.
2. It provides identification data and technical specifications for the 1850K Crawler Dozer, including dimensions, weights, fluids used, and performance data.
3. The document outlines general maintenance instructions and troubleshooting tips. It includes tables of measurement units and tightening torques.
4. The bulk of the document contains detailed sections on the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems
New holland d180 tier 3 crawler dozer service repair manual instant downloadfudjjskekemmme
This document provides safety instructions and technical specifications for operating a CRAWLER DOZER workshop manual. It outlines key safety warnings to avoid risks to personnel and emphasizes the importance of following maintenance and repair instructions. Technical data and dimensions are provided for D180 models, including engine information, fluid capacities, weights, and component specifications. The document stresses the need to strictly follow safety precautions to prevent accidents and ensure safe operation of the machinery.
New holland d180 tier 3 crawler dozer service repair manualujdfjjjdfkkskemm
This document provides safety instructions and technical specifications for operating a CRAWLER DOZER workshop manual. It outlines key safety warnings to avoid risks to personnel and emphasizes the importance of following maintenance and repair instructions. Technical data and dimensions are provided for D180 models, including engine information, fluid capacities, weights, and component specifications. The document stresses the need to strictly follow safety precautions to prevent accidents and ensure safe operation of the machinery.
New holland d150 crawler dozer service repair manualfjjsjekfkskekme
The document provides safety instructions for operating and maintaining a crawler dozer. It warns of dangers such as moving parts, exhaust fumes, and working on slopes. Operators must read all safety rules, wear proper protective equipment, and not endanger themselves or others. Thorough maintenance following the manufacturer's guidelines is also emphasized for safety.
This document provides safety information and guidelines for engineers servicing a machine. It describes various safety symbols used in the manual and outlines safety precautions to follow when performing maintenance, including wearing protective equipment, using the correct tools, stopping the engine before working, and securing any moving parts. The manual structure is also summarized.
Takeuchi tb240 mini excavator service repair workshop manual (serial no. 1241...jfdjjskfkksmemm
1) The document is a service manual that provides procedures for maintenance and repair of a machine for engineers who service it. It describes disassembly, assembly, inspection, troubleshooting and specifications.
2) The manual uses symbols to indicate parts like the serial number and provides the structure of the manual which includes sections on safety, service data, functions, disassembly/assembly and troubleshooting.
3) The manual provides safety precautions for maintenance personnel which include wearing protective gear, installing safety equipment, properly preparing the work area, and procedures to safely work on and around the machine.
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Engineers should refer to this manual during work to improve service. The manual structure consists of sections covering safety, service data, functions, disassembly/assembly, troubleshooting and the engine. Safety precautions include wearing protective equipment, installing safety devices, securing the work area and taking caution with hot or pressurized components.
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Engineers should refer to this manual during work to improve service. The manual structure includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and the engine. Safety precautions are outlined, such as wearing protective equipment and stopping the engine before maintenance. Cautions are also given for working with hot or pressurized components, batteries, and welding repairs.
CASE 2550 Crawler Dozer Service Repair Manual.pdffujsekdmdm4r
The document provides safety rules for operating and maintaining machinery. It emphasizes reading safety instructions, wearing proper protective equipment, ensuring the work area is clear before starting the machine, following proper startup and shutdown procedures, operating safely on slopes and uneven terrain, parking in safe locations, and only allowing authorized personnel to perform maintenance. Failure to follow the safety rules could result in health risks or accidents.
Case 2550 crawler dozer service repair manualufjsekksmemm
The document provides safety instructions for operating machinery. It emphasizes reading safety rules thoroughly and following all warnings, cautions and precautions to avoid risks and ensure safety. Operators must be properly trained, wear protective equipment, and keep the operating area clear of others. Machines must be inspected for safety before use and operated carefully at appropriate speeds according to conditions.
Case 2550 crawler dozer service repair manualfujsjfkkskem
The document provides safety rules for operating and maintaining machinery. It emphasizes reading safety instructions, wearing proper protective equipment, ensuring the work area is clear before starting the machine, following proper startup and shutdown procedures, operating safely on slopes and uneven terrain, parking in safe locations, and only allowing authorized personnel to perform maintenance. Failure to follow the safety rules could result in health risks or accidents.
CASE 3550 Crawler Dozer Service Repair Manual Instant Download.pdfsang1818141471
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual.pdff7usejkdkdmdmw2
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual.pdffujskekdjdmd
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual.pdfjnjn9464773
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual Instant Download.pdfgongyi2122252
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual.pdfhan647runken
This document is a service manual for a 3550 Crawler Dozer. It contains several sections: Generalities, Engine, Transmission, Final Drives, Brakes and Steering Differential, Undercarriage, Dozing Equipment, Hydraulic System, and Electrical System. The document provides many safety warnings and precautions to follow when operating, maintaining, or repairing the dozer. Personnel are instructed to read all safety information carefully and only perform maintenance if authorized and following all procedures.
CASE 3550 Crawler Dozer Service Repair Manual Instant Download.pdfnaoji181714047
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
CASE 3550 Crawler Dozer Service Repair Manual.pdffujsekdmdm4r
This document is a service manual for a 3550 Crawler Dozer. It contains several sections: Generalities, Engine, Transmission, Final Drives, Brakes and Steering Differential, Undercarriage, Dozing Equipment, Hydraulic System, and Electrical System. The document provides many safety warnings and precautions to follow when operating, maintaining, or repairing the dozer. Personnel are instructed to read the safety rules carefully and only perform maintenance if authorized to do so.
CASE 3550 Crawler Dozer Service Repair Manual.pdffjksmmdmder
This document is a service manual for a 3550 Crawler Dozer. It contains several sections: Generalities, Engine, Transmission, Final Drives, Brakes and Steering Differential, Undercarriage, Dozing Equipment, Hydraulic System, and Electrical System. The document provides many safety warnings and precautions to follow when operating, maintaining, or repairing the dozer. Personnel are instructed to read the safety rules carefully and only perform maintenance if authorized to do so.
CASE 3550 Crawler Dozer Service Repair Manual.pdfzhan96lun
This document is a service manual for a 3550 Crawler Dozer. It contains several sections: Generalities, Engine, Transmission, Final Drives, Brakes and Steering Differential, Undercarriage, Dozing Equipment, Hydraulic System, and Electrical System. The document provides many safety warnings and precautions to follow when operating, maintaining, or repairing the dozer. Personnel are instructed to read all safety information carefully and only perform maintenance if authorized and following all procedures.
CASE 3550 Crawler Dozer Service Repair Manual.pdff8usjkdkdmmd
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
Case 3550 crawler dozer service repair manualufjjskefksemm
This document is a service manual that provides safety instructions and warnings for operating and servicing a 3550 Crawler Dozer. It contains multiple sections covering general information, the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems. The document emphasizes the importance of following all safety rules, wearing proper protective equipment, checking equipment before operation, and taking precautions such as not carrying passengers or operating in unsafe conditions to avoid accidents.
This document is a service manual for a 3550 Crawler Dozer. It contains several sections: Generalities, Engine, Transmission, Final Drives, Brakes and Steering Differential, Undercarriage, Dozing Equipment, Hydraulic System, and Electrical System. The document provides many safety warnings and instructions regarding the safe operation and maintenance of the dozer.
Case 1850 k tier 3 crawler dozer service repair manualfjkskekkemmmd
This document is a service manual for a 1850K Crawler Dozer. It contains several sections:
1. The document begins with important safety notices, warning the reader to only allow authorized personnel to perform maintenance and repairs following the manufacturer's instructions.
2. It provides identification data and technical specifications for the 1850K Crawler Dozer, including dimensions, weights, fluids used, and performance data.
3. The document outlines general maintenance instructions and troubleshooting tips. It includes tables of measurement units and tightening torques.
4. The bulk of the document contains detailed sections on the engine, transmission, final drives, brakes, undercarriage, dozing equipment, hydraulic and electrical systems
Case 1850 k tier 3 crawler dozer service repair manualfjskefkemms
This document is a service manual for a 1850K Crawler Dozer that contains important safety information and identifies key components. It provides warnings about performing unauthorized repairs and using unapproved parts. The summary lists safety symbols used in the manual and directs the reader to carefully follow all safety instructions. Sections of the manual are identified that cover the engine, transmission, brakes, undercarriage, dozing equipment, and other systems. Readers are advised to thoroughly review safety rules before operating or servicing the machine.
Case 1850 k tier 3 crawler dozer service repair manualfujsjefkkkemme
This document is a service manual for a 1850K Crawler Dozer that contains important safety information and identifies key components. It provides warnings about performing unauthorized repairs and using unapproved parts. The summary lists safety symbols used in the manual and directs the reader to carefully follow all safety instructions to avoid risks and protect their health and safety. It also provides an overview of the manual's contents, which includes sections on the engine, transmission, brakes, undercarriage, dozing equipment, and electrical and hydraulic systems.
Similar to Case 2550 crawler dozer service repair manual (19)
Volvo sd116 dx single drum roller service repair manualjfjkskefksmem
The document provides information on the steering system, components, and procedures for a machine model COS SD116DX. It describes the steering system components including the steering wheel, cylinders, control unit, and pump. It also provides troubleshooting information for common steering issues and their potential causes. Procedures are outlined for checking and adjusting steering pressure, removing and installing the steering cylinder. Diagrams show the location of steering components and procedures for servicing.
Volvo sd110 single drum roller service repair manualjfjkskefksmem
The machine frame consists of a rear frame assembly, front frame assembly, and swivel frame connecting the two. The rear frame supports components like tanks and engines, while the front frame supports the drum assembly.
The drum has a smooth surface and transmits vibration to loosen material via an eccentric assembly powered by a hydraulic motor.
Removing the drum assembly involves disconnecting hoses, loosening mounting bolts, lifting out the assembly which weighs nearly 4 tons, and removing vibration and drive side mounts. Installing follows the reverse process.
Volvo ec340 excavator service repair manualjfjkskefksmem
1. The document provides instructions for installing a counterweight on an excavator. It describes attaching lifting tools and straps to lift the 6,400 kg counterweight into place and securing it with screws.
2. The instructions are also provided for removing the counterweight, which include attaching lifting tools and straps, loosening screws, and carefully lifting the counterweight away.
3. Additional documents provide descriptions of the excavator's undercarriage and tracks, as well as instructions for installing and removing the idler and drive sprocket. Safety warnings are included throughout regarding the heavy lifting involved.
Volvo sd77 f single drum roller service repair manualjfjkskefksmem
This document provides instructions for removing a hydraulic motor from a machine. It describes draining the oil from the rear axle, disconnecting electrical and hydraulic connections from the motor, and removing mounting bolts. Safety precautions are noted, including using lifting devices with adequate capacity and handling fluids safely. Reinstallation involves reversing these steps, including reconnecting lines and bolts, refilling oil, and testing operation.
Mc cormick xtx145 tractor operator manualjfjkskefksmem
This document is the operators manual for XTX Series tractors, models XTX145 through XTX215. It contains chapters on safety precautions, operating controls, instruments and programming, operation, maintenance, and technical specifications. Safety is the top priority, with warnings about potential hazards and safety symbols explained. Controls, instruments, functions, and standard operation are outlined. Routine maintenance procedures and schedules are provided to keep the tractor in good working order.
Volvo ec330 c ld ec330cld excavator service repair manualjfjkskefksmem
1. The document provides instructions for removing the counterweight from an excavator. It describes removing covers and plugs from the top of the counterweight, installing eye bolts, and attaching lifting cables or slings to lift the counterweight.
2. Specific steps include removing screws securing the engine room under cover, and then removing lock nuts and nuts using socket wrenches or a power wrench.
3. The counterweight is then lifted slightly to check for safety, before fully lifting it up and out of position. Warnings are given about the heavy weight and ensuring no one is underneath during lifting.
Mc cormick mc95 tractor operator manualjfjkskefksmem
This document is an operators manual for McCormick tractors models MC95, MC105, MC115, MC120Power6 and MC135Power6. It discusses McCormick's commitment to quality, with dealers guaranteeing tractors are delivered in top condition. It also notes the purchase provides a state-of-the-art tractor of the highest quality, and regular maintenance is important for continued value, operation and reliability. The manual then provides a table of contents outlining what will be covered such as safety precautions, instruments and controls, general and field operation, servicing, and specifications.
Kubota v3800 di t-e3cb diesel engine service repair manualjfjkskefksmem
This document provides specifications and maintenance information for several Kubota diesel engine models:
- It lists technical specifications such as engine type, displacement, power output, lubrication system, and dimensions for each model.
- The maintenance section outlines checklists and maintenance schedules, with inspection points divided into daily, 50-hour, 250-hour, 1000-hour, and longer intervals.
- Safety instructions are provided to warn technicians of hazards when servicing the engines.
Kubota v3300 e3 bg diesel engine service repair manualjfjkskefksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Volvo ec235 d nl ec235dnl excavator service repair manualjfjkskefksmem
The document provides information on replacing the track unit of an excavator. It begins with instructions to park the machine and stop the engine to release hydraulic pressure. Next, it describes removing pins and the track from the sprocket and idler wheels. The final step instructs installing the new track by reversing the removal process and ensuring proper tension.
Volvo ec235 c nl ec235cnl excavator service repair manualjfjkskefksmem
The document provides information on servicing a track gearbox, including:
1. It describes the multi-stage planetary gearbox that reduces the speed and increases the torque from the hydraulic motor.
2. Maintenance procedures like checking the oil level and replacing the oil are outlined, as well as precautions for installation and operation.
3. Troubleshooting tips are provided for issues like abnormal sounds, temperatures, and leakages, along with the appropriate repairs.
Volvo ec235 c ld ec235cld excavator service repair manualjfjkskefksmem
The document provides information on servicing a track gearbox, including:
1. It describes the multi-stage planetary gearbox that reduces hydraulic motor speed and increases torque.
2. It provides details on port connections, rotational directions, lubrication requirements, and maintenance procedures like checking oil levels and replacing the gearbox cover.
3. Troubleshooting tips are given for issues like abnormal sounds, temperatures, and oil leakage from seals or joints. Replacement criteria are outlined for worn parts.
Volvo ec220 d nl ec220dnl excavator service repair manualjfjkskefksmem
1) The excavator's power transmission system transmits power from the engine to hydraulic pumps, then to hydraulic motors that power travel, swing, and attachments.
2) The track gearbox uses a two-stage planetary gear mechanism to reduce the speed of the hydraulic motor and increase torque to the sprocket.
3) Proper maintenance of the track gearbox includes following specifications for lubrication oil changes, torque values, and replacement of worn parts.
Volvo ec220 d n ec220dn excavator service repair manualjfjkskefksmem
The document provides instructions for replacing the floating seal on a track gearbox that has been removed from the excavator. It describes draining the oil from the gearbox and removing the cover. It explains how to clean and apply sealing compound to the mounting surface before installing the new cover. It also notes the need to refill the gearbox with the specified amount of oil.
Volvo ec220 d lr ec220dlr excavator service repair manualjfjkskefksmem
- The document provides instructions for replacing the counterweight on an excavator.
- It describes removing covers and brackets from the top of the counterweight, disconnecting wiring, and using cables to lift the counterweight off the excavator.
- The instructions then cover installing the new counterweight, reattaching wiring and brackets, and securing the counterweight in place with mounting screws.
Mc cormick xtx165 tractor operator manualjfjkskefksmem
This document is the operators manual for XTX Series tractors, including models XTX145, XTX165, XTX185, XTX200, and XTX215. It contains chapters on safety precautions, operating controls, instruments and programming, operation, maintenance, electrical systems, and technical specifications. Safety is the top priority, with warnings about potential hazards and safety symbols explained. Controls, functions, and basic operation are outlined. Routine maintenance procedures are included to keep the tractor in good working order.
Mc cormick mtx120 tractor operator manualjfjkskefksmem
This document is an operators manual for McCormick MTX120, MTX135, and MTX150 tractors from serial number JJE3336280 onwards. It contains chapters on safety precautions, operating controls, instruments and programming, operation, tires wheels and ballasting, and maintenance. The manual provides instructions and specifications to safely operate the tractors and maintain them. It covers topics like safety symbols, controls, instrumentation displays, transmission operation, three point hitch use, ballasting, and maintenance schedules.
Mc cormick mc105 tractor operator manualjfjkskefksmem
This document is an operators manual for McCormick tractors models MC95, MC105, MC115, MC120Power6 and MC135Power6. It discusses McCormick's commitment to quality, with dealers guaranteeing tractors are delivered in top condition. The purchase of a McCormick tractor ensures a state-of-the-art machine of the highest quality. The manual provides instructions on operation, safety precautions, instruments and controls, field operation, routine servicing, and specifications. It is intended to ensure safe and proper use of the tractor.
Kubota v3600 e3 b diesel engine service repair manualjfjkskefksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Hitachi zaxis 240 lch excavator service repair manualjfjkskefksmem
This document contains three manuals: a Service Manual, a Technical Manual, and a Workshop Manual for an excavator. The Service Manual consists of three separate volumes: the first covers introduction and safety information, the second covers technical information and operational principles, and the third covers troubleshooting. The document provides summaries of the contents of each volume and manual. It also includes tables of conversion factors for different units of measurement.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
1. Study SAFETY RULES in the front of this manual thoroughly for the protection of machine and safety of personnel.
THIS ALERT SYMBOL SIGNALS IMPORTANT MESSAGES INVOLVING YOUR SAFETY.
Readandheedcarefullythesafetyinstructionslistedandfollowtheprecautionsrecommendedtoavoidpotential
risks and to safeguard your health and your safety.
You will find this symbol in the text of this Manual referred to the following key words:
WARNING - Cautions directed to avoid improper repair interventions involving potential consequences for the
operator’s safety.
DANGER - These warnings qualify specifically potential dangers for the safety of the operator or other persons
directly or indirectly involved.
IMPORTANT NOTICE
All maintenance and repair interventions explained in this Manual must be performed exclusively by the Service
Organization of the Manufacturer, observing strictly the instructions explained using, whenever necessary, the
recommended specific tools.
Whoever performs the operations reported without following exactly the precautions is responsible on his own, for
the damages that may result.
Neither the Factory nor any Organizations in its Distribution Network, including but not limited to national, regional
or local distributors, are responsible for any liability arising from any damage resulting from defects caused by parts
and/or components not approved by the Factory for use in maintaining and/or repairing products manufactured or
merchandized by the Factory.
In any case, no warranty of any kind is made or shall be imposed with respect to products manufactured or
merchandized by the Factory, when failures are caused by the use of parts and/or components not approved by the
Factory.
2550
CRAWLER DOZER
Service Manual
Print N° 84414739B English
3. TITLE PAGE
SAFETY RULES ................................................................................................... I - VIII
TECHNICAL DATA TABLES .................................................................................. 1 - 15
GENERAL INSTRUCTIONS ................................................................................ 16 - 20
DIAGNOSTIC CHECKS ............................................................................................... 21
MEASURE UNITS ....................................................................................................... 22
CLASSIFICATION OF STANDARD PARTS ................................................................ 22
TIGHTENING TORQUES ............................................................................................ 23
SECTION 0
GENERALITIES
TABLE OF CONTENTS
4. I
Study this Manual before starting, operating, maintaining, fuelling or servicing the machine.
Read and heed all safety rules before any intervention.
- Be sure all protective guards or panels are in place, and
all safety devices provided are in place and in good
operating conditions.
- Be sure exposed personnel in the area of operation are
clear of the machine before moving it or its attachments.
WALK COMPLETELY AROUND the machine before
mounting. Sound horn. Obey flag man, safety signals
and signs.
- Before starting machine, check, adjust and lock the
operator’s seat for maximum comfort and control of the
machine.
- Fasten your seat belt (when provided).
- Obey all flag signals and signs.
- Due to the presence on the machine of flammable fluids,
never check or fill fuel reservoirs or batteries near open
flames, smoking materials or sparks.
- REMEMBERTHATSTARTINGFLUIDISFLAMMABLE.
Follow recommendations printed on containers and in
the Operation and Maintenance Manual.
- DO NOT PUNCTURE OR BURN CONTAINERS.
- Containers must be stored in fresh, well ventilated
places, out of reach of unauthorised persons. Follow
strictly the instructions provided by the Manufacturer.
- Never use these preducts near open flames, smoking
materials or sparks.
OPERATION
- Do not run the engine of this machine in closed areas
withoutproperventilationtoremovedeadlyexhaustgases.
- Roll Over Protective Structures are required on loaders,
dozers, graders, excavators. NEVER OPERATE ma-
chines without ROPS.
- Make sure the Operator’s compartment is free of foreign
objects, especially if not firmly secured. Never use the
machine to transport objects, unless proper securing
points are provided.
- Check monitoring instruments at start-up and frequently
during operation if the brake pressure gauge sugnals a
pressure lower than the minimum operation value, stop
immediately the machine.
WARNING
SAFETY RULES
- Do not allow unauthorised personnel to operate service
or maintain this machine.
- Do not wear rings, wrist watches, jewellery, loose or
hanging apparels, such as ties, torn clothing, scarves,
unbuttoned or unzipped jackets that can catch on mov-
ing parts. Wear proper safety equipment as recom-
mended for the job. Examples: hard hat, heavy gloves,
ear protection, safety glasses or goggles, reflector vests,
respirator. Consult your employer for specific safety
equipment requirements.
- Keep operator’s compartment, stepping points, grab-
rails and handles clear of foreign objects, oil, grease,
mud or snow accumulation to minimize the danger of
slipping or stumbling.
Clean mud or grease from shoes before attempting to
mount or operate the machine.
- Do not jump on or off the machine. Keep two hands and
one foot, or two feet and one hand in contact with step
grab rails and handles at all times.
- Do not use controls or hoses as hand holds when
climbing on or off machine. Hoses and controls are
movable and do not provide a solid support. Controls
also may be inadvertently moved causing accidental
machine or equipment movement.
- Never attempt to operate the machine or its tools from
any position other than seated in the operator’s seat.
- Keep head, body, limbs, hands and feet inside opera-
tor’s compartment at all times to reduce exposure to
hazards outside the operator’s compartment.
- Be careful of slippery conditions on stepping points,
hand rails, and on the ground. Wear safety boots or
shoes that have a high slip resistant sole material.
- Do not leave the machine until it is completely stopped.
- Check the seat safety belt at least twice a year. If there
are signs of wear or fraying or other signs of weakness
that could lead to failure, replace it.
STARTING
- NEVER START OR OPERATE AN UNSAFE MACHINE.
Before operating a machine, always ensure that any
unsafe condition has been satisfactorily remedied.
- Check brakes, steering and attachment controls before
moving. Advise the proper maintenance authority of any
malfunctioning part or system.
5. SAFETY RULES
- Be sure chains and cables are anchored and the anchor
points are strong enough to handle the expected load.
Keep exposed personnel clear of anchor points and
cables or chains.
- DO NOT PULL UNLESS OPERATOR’s COMPART-
MENT OF MACHINES INVOLVED ARE PROPERLY
GUARDED AGAINST POTENTIAL CABLE OR CHAIN
BACKLASH.
- Be alert to soft ground conditions close to newly con-
structed walls. The fill material and weight of the machine
may cause the wall collapse under the machine.
- In darkness, check area of operation carefully before
moving in with machine. Use all lights provided. Do not
move into area of restricted visibility.
- If engine has a tendency to stall for any reason under
load or idle, report this for adjustment to proper mainte-
nance authority immediately.
Do not continue to operate machine, until condition has
been corrected.
- On machines supplied with suction radiator fans, be sure
to periodically check engine exhaust parts for leaks, as
exhaust fumes are dangerous to the operator.
- In case of enclosed cabs, always let open a discharge
to the outside, to ensure air circulation.
- Operators must know thoroughly the performances of
the machine they are operating.
When working on slopes or near sudden level drops of
the terrain, avoid areas where ground is loose or soft
since rolling-over or loss of control of machine could
result.
- Where noise exposure exceeds 90 dBA for 8 hours, wear
approved ear protection.
- When counterweights are provided, do not work ma-
chine if they have been removed.
- Overtaking manoeuvres must be performed only when
absolutely necessary and unavoidable.
Beware of possible uneven terrains, poor visibility con-
ditions, the presence of other machinery or persons out
of sight.
- Operate the machine at a speed adequate to the working
conditions in the site and slow enough to ensure com-
plete control at all times.
- Check monitoring instruments at start-up and frequently
during operations.
In case of abnormal condition warnings, stop immedi-
ately the machine.
- Never use the machine as a work platform or scaffolding,
nor other inappropriate operations (i.e pushing railway
cars, trucks or other machines).
- DO NOT CARRY RIDERS ON MACHINE
- Study and familiarize with escape routes alternate to
normal exit routes.
- Seat belts are required to be provided with Roll Over
ProtectionStructuresorcabs.Keepsafetybeltsfastened
around you during operation.
- For your personal protection, do not climb on or off
machine while machine in motion.
- Make sure that exposed persons in the area of operation
are clear of the machine, before starting the engine and
operating the equipment. Obey all indications provided
by flags and signals.
- NEVER COAST the machine down grades and slopes
with the transmission in neutral or neutralized, or power
shift type machines, or clutch disengaged on manually
shifted machines.
- Do not operate machinery in a condition of extreme
fatigue or illness. Be especially careful towards the end
of working shift.
- Do not operate machine with brakes out of adjustment.
- Operate the machine at speeds slow enough to ensure
complete control at all times.
- Travel slowly over rough terrain, on slopes or near drop-
offs, in congested areas or on ice or slippery surfaces.
- When backing, always look to where the machine is to
be moved.
Be alert to the position of exposed personnel. DO NOT
OPERATE if exposed personnel enter the immediate
work area.
STOP THE MACHINE.
- Maintain a safe distance from other machines. Provide
sufficient clearance for ground and visibility conditions.
Yield right-of-way to loaded machines.
- Maintain clear vision of areas of travel or work. Keep cab
windows clean and repaired.
- When machines are operating in tandem, the pusher
(rear) must be equipped with the appropriate deflectors
to protect the unit in front from the air stream coming from
the radiator.
- When pulling or towing through a cable or chain, do not
start suddenly at full throttle; take-up slack carefully.
Inspect carefully for flaws or troubles before using.
- Avoid kinking chains or cables. Do not pull through a
kinked chain or cable to the high stresses and possibility
of failure of the kinked area.
Always wear heavy gloves when handling chains or
cables.
II
6. SAFETY RULES
- Be alert of people in the operating area of the machine.
When operating a machine, know what clearances will
be encountered, overhead doors, cables, pipes, bear-
ing load limitations of ground, bridges, floors or ramps.
- When roading, find-out what conditions are likely to be
encountered, clearances, traffic congestion, type of road
surfacing, etc.
Beware of fog, smoke or dust elements that obscure
visibility.
- When crossing gullies or ditches, move at an angle with
reduced speed after ensuring ground conditions will
permit a safe traverse.
- Explore the working area to identify potential risks such
as: slopes, overhangs, pits, demolition rubble, fires,
ravines, ditches, soft terrain, heavy traffic, crowded park-
ing areas, closed ambients. In such conditions, proceed
with extreme care.
- Whenever possible, avoid going over obstacles such as
rough terrain, rocks, logs highly irregular ground, steps,
ditches, railroad tracks. When obstructions must be
crossed, do so with extreme care at an angle, if possible.
Reduce speed, shift-down.
Ease up to the break over point, pass the balance point
slowly on the obstruction and ease down on the other
side.
- In steep down-hill operation, do not allow engine to over-
speed. Select proper gear before starting down grade.
- Avoid side hill travel, whenever possible. Drive up and
down the slope. Should the machine slipping sideways,
turn it immediately downhill.
- The grade of slope you should attempt will be limited by
factors such as condition of the ground, load being
handled, type of machine, speed of machine and visibil-
ity.
- There is no substitute for good judgement when working
on slopes.
- Avoid operating equipment too close to an overhang or
high wall, either above or below the machine. Be on the
look-out for caving edges, falling objects and slides.
Beware of concealment by brush and undergrowth of
these danger.
- When pushing-over trees, the machine must be
equipped with proper overhead guarding. Never allow
a machine to climb up on the root structure particularly
while the tree is being felled.
Use extreme care when pushing over any tree with dead
branches.
- Avoid brush piles, logs or rocks. NEVER DRIVE OVER
THEM or other surface irregularities that brake traction
with the ground, especially when on slopes or near drop-
offs.
- Be alert to avoid changes in traction conditions that could
cause loss of control. DO NOT DRIVE on ice or frozen
ground conditions when working the machine on steep
slopes or near drop-offs.
- Working in virgin and rough terrains is characterized by
the presence of all the perils and risks listed above. In
these conditions, it is emphasised the danger repre-
sented by large tree limbs (possibly falling on the ma-
chine), large roots (acting as a leverage under the
machine when up-rooted causing the roll-over of the
unit) etc..
STOPPING
- When the machine is stopped for whatever reason,
follow the instructions of chapters “Stopping the ma-
chine”and“Stoppingtheengine”oftheOperationand
Maintenance Instruction Manual.
- Always remember to position the transmission drive
control in neutral and engage the control lock to secure
the machine.
- Set parking brake.
- NEVER LEAVE THE MACHINE UNATTENTED with the
engine running.
- Always before leaving the operator’s seat and after
making sure all people are clear of the machine, slowly
lower the attachments or tools flat to the ground in a
positive ground support position.
- Return the controls in neutral position. Place the gear-
shift lever in neutral and shut-off the engine. Lock the
gearshift lever, switch-off and lock the starter switch.
- Park in a non- operating and no-traffic area or as in-
structed. Park on firm level ground if possible. Where not
possible, position machine at a right angle to the slope,
making sure there is no danger of uncontrolled sliding
movements. Set parking brake.
- If parking in traffic lanes cannot be avoided, provide
appropriate flags, barriers, flares and signals as re-
quired. Also provide advance warning signals in the
traffic lane of approaching traffic.
- Keep head, body, limbs, hands and feet away from
blade, arms, bucket or ripper when in raised position.
Always disconnect the master switch before any inter-
vention (i.e. cleaning, repairing, maintaining, refuelling
etc.). Do the same when parking for prolonged periods
of time to avoid accidental or unauthorized starting.
- Never lower attachments or tools other than seated in
operator’s seat. Sound horn. Make sure area near the
attachment is clear. Lower the attachment slowly. DO
NOT USE FLOAT POSITION of hydraulic system.
III
7. SAFETY RULES
- Securely block the machine and lock it every time you
leave it unattended. Return keys to authorized security.
Heed all shut-down operations of the Operation and
Maintenance Instruction Manual are followed. Every
time you leave the machine, engage parking brake (if
equipping unit).
MAINTENANCE
GENERALITIES
- Before operating or performing any intervention on the
machine:
- read carefully all the rules contained by this Manual;
- read and obey all safety related plates and instruc-
tions located on the machine.
- Do not allow unauthorized personnel to perform any
maintenance operation. Do not perform maintenance
operation without prior authorization. Follow all recom-
mended maintenance and service procedures.
- Keep operator’s compartment free of all loose objects
that are not properly secured.
- Do not wear rings, wrist watches, jewellery, loose or
hanging apparels, such as ties, torn clothing, scarves,
unbuttoned or unzipped jackets that can catch on mov-
ing parts.
Wear proper safety equipment as recommended for the
job. Examples: hard hat, heavy gloves, ear protection,
safety glasses or goggles, reflector vests, respirator.
Consult your employer for specific safety equipment
requirements.
- Do not use controls or hoses as handholds when climb-
ing on or off the machine. These components are mov-
able and do not provide a solid support. Controls may
also be moved unintentionally causing accidental ma-
chine or equipment movements.
- Do not jump on or off the machine. Keep two hands and
one foot, or two feet and one hand in contact with steps
and grab rails and handles at all times.
- Do not perform any service operation on the machine
with a person seated in the operator’s compartment,
unless he is an authorized operator co-operating in the
operation to be performed.
- Keep operator’s compartment, stepping points, grab-
rails and handles clear of foreign objects, oil, grease,
mud or snow accumulation to minimize the danger of
slipping or stumbling. Clean mud or grease from shoes
before attempting to mount or operate the machine.
- Keep shoes free of mud or grease before climbing or
driving the machine.
- Never attempt to operate the machine or its tools from
any position other than seated in the operator’s seat.
- When maintenance operations require moving hydrau-
lically operated attachments by means of machine’s
hydraulic system remember that all manoeuvres must
be made only when seated in the operator’s seat. Before
starting machine or moving attachment or tools, set
brakes, sound horn and call for an all clear. Raise
attachment slowly.
- Always block with external supportsany linkage or part
on machine that requires work under the raised linkage,
part or machine . Never allow anyone to walk under or
be near unblocked raised equipment. Unless your are
positively sure that total safe condition exist, avoid stay-
ing under raised equipment, even if blocked.
- Never place head, body, limbs, fingers, feet or hands into
exposed portions between uncontrolled or unguarded
scissor points of machine without first providing secure
blocking.
- Never perform interventions with engine running, ex-
cept as called for in a Manual. Do not wear loose clothing
or jewellery near moving parts.
- When servicing or maintenance require access to areas
that cannot be reached from the ground, use a ladder or
step platform that meet local and national regulations, to
reach the service point. If such ladder or platform are not
available, use the machine hand holds and steps as
provided. Perform all service or maintenance carefully.
- Shop and/or field service platforms or ladders must be
constructed and maintained in accordance with local
and national regulations.
- Disconnect batteries and TAG all controls according to
current regulations to warn that work is in progress. Block
machine and all attachments that must be raised accord-
ing to current regulations.
Due to the presence of flammable fluids, never check or
fill fuel tanks, batteries, nor use starting fluid near lighted
smoking materials or open flames.
- BRAKES ARE INOPERATIVE when manually released
for servicing. Provisions must be made to maintain
control of the machine by blocking or other means.
- The fuel filling nose must be kept constantly inside the
filling neck. Keep this contact from the beginning to the
end of the fuelling operation to avoid the possibility that
sparks due to static electricity are generated.
- Use only designated towing or attaching points. Use
care in making attachments. Make sure pins and/or locks
are secure before pulling. Stay clear of drawbars, cables
or chains under load.
IV
8. SAFETY RULES
V
- To move a disabled machine, use a trailer or a low-boy,
if available. In case towing is needed , use all necessary
signals required by local and national regulations, and
follow the directions provided in this Manual.
- To load/unload a machine from transporter, choose a
level surface ensuring firm support to the wheels of truck
or trailer.
Use strong access ramps, with adequate height and
angle. Keep surface free of mud, oil or slippery materials.
- Anchor the machine securely to the bed of truck or trailer
and block wheels or tracks with appropriate wedges.
- Never align holes with fingers or hands; always use
appropriate aligning tools.
- Eliminate all sharp edges and burrs from re-worked
parts.
- Use only approved grounded auxiliary power sources
for heaters, chargers, pumps and similar equipment to
reduce the hazards of electrical shocks.
- Lift and handle heavy parts with a lifting device of proper
capacity. Be sure parts are supported by proper slings
and hooks. Use lifting eyes if provided. Watch-out for
people in the vicinity.
- Never pour gasoline or diesel fuel into open, wide and
low containers. Never use gasoline, solvent or other
flammable fluid to clean parts. Use exclusively qualified,
non-flammable, non-toxic commercial solvents.
- When using compressed air for cleaning parts, use
safety glasses with side shields or goggles. Limit pres-
sure to 2 bar, in accordance with local and national
regulations.
- Do not run the engine in closed areas without proper
ventilation to remove deadly exhaust fumes.
- Do not smoke or permit any open flames or spark near
when re-fuelling or handling flammable materials.
- Do not use an open flame as a light source to look for
leaks or for inspection anywhere on the machine.
- Make sure that all mechanic’s tools are in good condi-
tions. NEVER USE tools with mushroomed heads or
frayed. Always wear eye protections.
- Move with extreme care when working under the ma-
chine, its attachments and or on or near them. Always
wear protective safety equipment as required, such as
hard hat, goggles, safety shoes, ear plugs.
- When performing operations requiring running of the en-
gine, have a qualified operator in the operator’s seat at all
times with the mechanic on sight. Place the transmission
inneutralandsetthebrakesandsafetylock.KEEPHANDS
AND CLOTHING AWAY FROM MOVING PARTS.
- For field service, move machine to level ground, if
possible, and block it.
If work on an incline is absolutely necessary, first block
machine and its attachments securely, than move it to
level ground as soon as possible.
- Do not trust worn and /or kinked chains and cables: do
not use them for lifting or pulling operations.
To handle them, always use heavy gloves.
- Avoid kinking chains or cables.
Do not pull through a kinked chain or cable to the high
stresses and possibility of failure of the kinked area.
Always wear heavy gloves when handling chains or
cables.
- Be sure chains and cables are anchored and the anchor
points are strong enough to handle the expected load.
- Keep exposed personnel clear of anchor points and
cables or chains.
- DO NOT PULL UNLESS OPERATOR’s COMPART-
MENT OF MACHINES INVOLVED ARE PROPERLY
GUARDED AGAINST POTENTIAL CABLE OR CHAIN
BACKLASH.
- Keep the area where maintenance operations are per-
formed CLEAN and DRY. Eliminate immediately all
water and oil spillages.
- Do not pile oily or greasy rags; they represent a fire
hazard. Store in closed metal container.
- Before starting machine, check, adjust and lock the
operator’s seat for maximum comfort and control of the
machine.
Be sure exposed personnel in the area of operation are
clear of the machine before moving it or its attachments.
Sound horn.
- Rust inhibitors are volatile and flammable Use only in
well ventilated areas.
Keep open flames away - DO NOT SMOKE - Store
containers in a cool well ventilated place, secure against
unauthorised personnel.
- Do not carry loose objects in pockets that might fall
unnoticed into open compartments.
- Wear proper protective equipment such as safety gog-
gles or safety glasses with side shields, hard hat, safety
shoes, heavy gloves when metal or other particles are
apt to fly or fall.
- Wear welders protective equipment such as dark safety
glasses, helmets, protective clothing, gloves and safety
shoes, when welding or burning.
Wear dark safety glasses near welding zones.
DONOTLOOKATARCWITHOUTPROPEREYEPRO-
TECTION.
9. - Know your jacking equipment and its capacity. Be sure
the jacking point used on the machine is appropriate for
the load to be applied. Be sure the support of the jack at
the machine and under jack is appropriate and stable.
Loads lifted by hydraulic jacks are always dangerous.
Transfer load to appropriate blocking as a safety meas-
ure, before proceeding with service or maintenance
work, according to local or national regulations.
- Steel cables are frayed after prolonged use; always
wear appropriate protections (heavy gloves, goggles
etc.).
- Handle all parts carefully. Keep hands and fingers away
from structures, gears or moving parts. Use and wear
always the appropriate protections
- Compressed air systems can have water deposits cre-
ated by moisture condensation due to changes of atmos-
pheric conditions. If required, discharge deposits, as
instructed.
STARTING
- Do not run the engine in closed areas without proper
ventilation to remove deadly exhaust fumes.
- Do not place head, body, limbs, feet, hands or fingers,
near rotating fans or belts. Be especially alert near
pusher fans.
- REMEMBERTHATSTARTINGFLUIDISFLAMMABLE.
Follow recommendations printed on containers and in
the Operation and Maintenance Manual.
- Containers must be stored in fresh, well ventilated
places, out of reach of unauthorised persons. Follow
strictly the instructions provided by the Manufacturer.
DO NOT PUNCTURE OR BURN CONTAINERS.
ENGINE
- Loosen the radiator cap very slowly, to release pressure
from the system, before removing it. All coolant level top-
ups must be performed with engine OFF.
- Avoid that flammable materials touch exhaust parts.
Should this be possible, provide the necessary protec-
tions.
- Do not run engine when refuelling and use care if the
engine is hot due to the increased possibility of a fire if
fuel is spilled.
- Never attempt to check or adjust fan belts when engine
is running.
SAFETY RULES
VI
- Do not adjust engine fuel pump when machine is mov-
ing.
- Do not lubricate the machine with engine running.
- Do not run the engine with air intakes, door or protections
open.
ELECTRICALSYSTEM
- Always disconnect batteries prior to any intervention on
machine or electrical system (cleaning, repair, mainte-
nance).
- Should booster batteries be used, remember to connect
both ends of the booster cables in the proper manner (+)
with (+) and (-) with (-). Avoid short-circuits of the termi-
nals. Follow thoroughly the instructions of this Manual.
- Before any intervention, make sure that the main switch
is OFF.
- BATTERYGASISHIGHLYFLAMMABLE.Leavebattery
box open to improve ventilation when recharging batter-
ies. Never check charge by placing metal objects across
the posts. Keep sparks or open flames away from batter-
ies. Do not smoke near battery to guard against the
possibility of causing an explosion.
- Before any intervention, make sure that there are no fuel
or electrolyte leakages; eliminate them before proceed-
ing with further work.
Do not charge batteries in closed areas: ensure enough
ventilation to prevent the possibility of accidental explo-
sions due to accumulation of gases generated during
the recharging.
HYDRAULICSYSTEM
- Fluid escaping under pressure from a very small hole
can be almost invisible and can have sufficient force to
penetrate the skin. Use a piece of cardboard or wood to
search for suspected pressure leaks.
DO NOT USE HANDS. If injured by escaping fluid, see
a doctor at once. Serious infection or reaction can
develop if proper medical treatment is not administered
immediately.
- Stop the engine and release all pressures in the system
before removing panels, housings, plugs or covers.
- In case pressures must be measured, use instruments
of adequate capacity. Always follow the recommended
procedures.
10. SAFETY RULES
VII
TOOLS
- Keep head, body, limbs, feet, fingers or hands away from
bucket, blade or ripper when in raised position.
- Prior to any intervention, install all safety devices accord-
ing to current rules and regulations. In case equipment
on the machine must be operated by hydraulic systems,
remember to proceed only after seating in the operator’s
compartment.
Make sure that there are no persons in the operating
area of the machine. Alert people before operating using
the horn and by voice. Move the equipment very care-
fully.
- Do not use machine to transport loose objects, unless
proper devices for this purpose are provided.
WARNING
On machines having hydraulically, mechanically, and/or cable controlled equipment (such as shovels,
loaders, dozers, excavators etc.) be certain the equipment is lowered to the ground before servicing,
adjustingand/orrepairing.Ifitisnecessarytohavethehydraulically,mechanically,and/orcablecontrolled
equipment partially or fully raised to gain access to certain items, be sure the equipment is suitably
supported by means other than the hydraulic lift cylinders, cable and/or mechanical devices used for
controlling the equipment.
- Clutches and brakes of this machine and eventual
auxiliary equipment and attachments (such as operat-
ing cylinder or winches control valves) must always be
properly adjusted in accordance with the instructions
provided by the Manuals of the Manufacturer. Never
perform adjustments with engine running, except when
called for by the above instructions.
- Do not proceed with adjustments with engine running,
unless required by prescribed procedures.
- When changing work shifts, check that there are no
screws and/or mounting brackets loose. If required
tighten as instructed in this publication.
11. SAFETY RULES
SAFETY RULES FOR SEALS
VITON SEALS (fluoro - elastomer)
Seals, especially Viton made O-rings Normally coloured
red) are used in systems operating at high temperatures,
considering the resistance of this material to the effects of
heat. However, should this material be subject to tempera-
tures exceeding 315 °C (600 °F) - in practice only in case
of a fire or subject to the flame of an oxyacetylene torch -
hydrofluoric acid is generated. This acid is highly corro-
sive and can cause severe burns if in contact with the
skin.
every time it is necessary to intervene on components
equipped with Viton rings, and there is the suspicion that
they have been exposed to excessive temperatures the
following procedures must be applied:
1) inspect visually, without touching them, all seals that
appear to be damaged by excessive heat. They appear
black and sticky;
2) check the type of material of the seals to identify if they
are made with Viton, performing the test illustrated in
the enclosure, on spare parts;
3) if it was found or there is a reasonable doubt that Viton
made components are involved, the contaminated
area MUST be decontaminated prior to proceeding
with further operations;
4) wear neoprene or PVC gloves and protective glasses
or face shield, wash accurately the contaminated area
with a solution of water lime (available at tile stores)
dissolved in water until a milky looking liquid is ob-
tained. Rinse accurately with steam or running water;
5) eliminate the materials removed and the protective
gloves in safe manner avoiding burning them.
TEST TO DISTINGUISH RUBBER MATERIAL (BUNA N) FROM
"VITON" (FLUORO ELASTOMER)
WATER WATER
"VITON"
FLUORO ELASTOMER
SINKS
NITRIL RUBBER / BUNA N
FLOATS
VIII
TRICHLOROETHYLENE
13. 0 - 12550
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
NOTE: - MACHINE IN OPERATING CONDITIONS
- HEIGHT OF GROUSERS: 71.4 mm
- The figure includes optional tools
TECHNICAL DATA TABLES
ANGLEDOZER
2070
3420
460
2296
2315
1500
175
800
700688
5301220
±5° 30'
±10°
1300560
700
1100
4490
4465
2973
550
5415
5855
4460 5360
5800
BULLDOZER HSU + RIPPER
L. 502
2770
2940
3800
14. 0 - 2 2550
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
Overall lenght (bare tractor) mm 4 490
Overall lenght (with semi-U blade) mm 5855
Overall lenght (with angledozer blade) mm 5 800
Overall width (bare tractor) mm 2 940
Overall width (with semi-U blade) mm 3650
Overall width (with angledozer blade) mm 4 460
DIMENSIONS
Overall height (to tip of exhaust pipe) mm 3 400
Overall height (with ROPS cab) mm 3 420
Track gauge mm 2 070
Minimum distance from ground mm 460
Lenght of track on ground mm 2 973
Track shoe width mm 550
Shipping weight (including ROPS cab, blade lift cylinders, kg 21 845
lubricants, coolant, 10% fuel)
MASS
Operating weight with semi-U (HSU) blade and ROPS cab kg 27000
Operating weight with angle (HA) blade, ROPS cab and ripper kg 26 400
Fwd 1st
km/h 3.7
Fwd 2nd
km/h 6.1
Fwd 3rd
km/h 10.9
SPEEDS
Rev 1st
km/h 4.4
Rev 2nd
km/h 7.2
Rev 3rd
km/h 12.6
Inside cab standard (Lpa) ISO 6394 dB 83
CEE 86/662 dB 83
NOISE LEVEL
Outside (Lwa) ISO 6394 dB 113
CEE 86/662 dB 113
PERFORMANCE
(Track shoes width 550 mm)
With semi-U (HSU) blade and ROPS bar 0.8085
GROUND
PRESSURE With angle (HA) blade, ROPS cab and ripper bar 0.791
With semi-U (HSU) blade, ROPS cab
and ripper bar 0.910
GRADEABILITY (1st
speed) degree 45
TECHNICAL DATA TABLES
15. 0 - 32550
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
TECHNICAL DATA TABLES
Model CUMMINS 6CTAA8.3
Type Diesel, 4 - cycle, direct injection,
turbocharged, aftercooled
Bore x stroke 114 x 135 mm
Displacement 8268 cm3
Number of cylinders 6
Net flywheel power (SAE J1349) 177 kW at 2200 rpm
Net flywheel power (DIN 6270) 240 CV / 179 kW at 2200 rpm
Net flywheel power (ISO 9249) 177 kW at 2200 rpm
Net flywheel power (CEE 80/1269) 177 kW at 2200 rpm
Max torque 114,6 daN m (101 kgm) at 1400 rpm
Governed speed 2200 rpm
Low idling 890 rpm
Fuel consumption ratio (max torque) 205 gr / kWh
Cranking motor 24 V - 7.5 kW
Alternator 28 V - 65 A
ENGINE Battery 12 V - 180 Ah x 2
Radiator Air - water with tubes
and line cores
Core size 1090 x 874 x 114 mm
Radiator cap pressure 0.75 bar
Fan Blower steel sheet, 7 blades,
diameter 900 mm
Air cleaner Dry type, two state with safety element
and centrifugal separator,
restrictor indicator
Muffler Horizontal type with dust ejector,
dimensions 258 x 545 mm
Aftercooler Air - air with tubes
and line cores
Core size 552 x 555 x 82 mm - Aluminium
ATH -100 °C
Air flow 23 kg/min
Max pressure 4 bar
Fan diameter 500 mm
1 stage, 1 fase, diameter 16"
Stall ratio 3.28 : 1
Impeller shaft moves thru a set
of gear:
Torque converter – implement pump
– transmission pump + converter pump
+ oil recovery pump
– steering clutches pump
POWER TRAIN
SYSTEM Countershaft, full power shift with remote
hydraulic pilot control, 3 gears forward and
3 gears reverse obtained through 5 multidisc
clutches actuated by single piston.
Transmission Transmission with 3 clutches having
centrifugal valves.
FWD and REV modulating valves, speeds
engagement modulating valve.
16. 0 - 4 2550
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
Torque converter - transmission Combined with converter oil circulation pump
pump and oil recovery pump
Capacity (2100 rpm) 96.5 l/min
Rated pressure 14 bar
Full flow (including lubrication) 193 l/min
Suction Metal gauze and magnetic rod 100 micron
Transmission filters filter capacity, without by-pass
Return Paper type with by-pass valve
Transmission regulating valve Mounted on converter case
Relief valve pressure (at 10 l/min flow) 10 ± 0.5 bar
Safety hand lever valve In lock position inhibits the gear engagement
and the engine cranking, and applies the
parking brakes
Pilot control valve (manipulator) On - off type with hydraulic detents.
Semi-open pattern.
Position 3FWD 2FWD 1FWD
– N N
3REV 2REV 1REV
POWER TRAIN Drive shaft Two U-joint and telescopic shaft type
SYSTEM
Nominal lenght 256 mm
Power take - off provvision Output from transmission reverse gear shaft.
CW rotation, viewed from the rear side of the
machine
Max output torque capacity (@ 0 output rpm) 241.5 daN m
Max output speed (@ 0 output torque) 2277 rpm
N. of splines 24
Module 2.58
Bevel gear set Straddle mounted pinion. Modular assembly
Ratio 13 / 38 = 1 : 1.293
Steering clutch Multidisc, wet type, spring actuated,
hydraulically released
N. of friction discs 11 (each clutch)
Total single friction area 7612 cm2
Disc I.D. 280 mm
Disc O.D. 350 mm
Friction material Sinterized
TECHNICAL DATA TABLES
17. 0 - 52550
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
TECHNICAL DATA TABLES
Brake Wet, Single band, bi-directional.
Brake mechanism is actuated by a spring
and released by the transmission oil
system, in the braking operation.
It is actuated by steering system during
the steering operation.
The band wear is recovered with automatic
adjuster device. Warning output light for
excessive wear.
Drum diameter 406 mm
Band width 130 mm
Total friction area 1604 cm2
Final drive Countershaft double reduction
Ratio 1 : 12.410
Sprocket 9 bolt-on segment type
Total N. of teeth 27
POWER TRAIN Pitch diameter 936.62 mm
SYSTEM
Tooth width 95 mm
Steering and braking control system The steering system is operated by two
hand levers installed on the left side of the
operator compartment. The lever travel,
applies a modulated pressure in the
steering control valve obtaining two
proportional pressures. First pressure
operate the disengagement of steering
clutch. Second pressure is equal to zero
until the first pressure reaches 17.5 bar
(50% of lever travel) than applies positively
the steering brakes. The service brake
system is operated negatively by a brake
pedal. Pedal acutation cuts with
modulation the back pressure of the brake
piston and applies, with springs, the brakin
load.
Steering system pump Gear type
Flow (@ rated engine speed) 65.5 l/min
Rated pressure 38 ± 38.7 bar
Suction Metal gauze and magnetic rod 100 micron
Steering system filters filter capacity, without by-pass.
Return Spin on type with by-pass valve 10 micron
filter capacity.
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. 0 - 6 2550
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
RAISE
NEUTRAL
LOWER
+ FLOAT
(w/DETENT)
Track frames Box section type, oscillating beam is
supported by resilient pads on the forward
portion of the track frame.
Rear of track frame pivots about sprocket
shaft.
Track oscillation (total travel of idler wheel) 410 mm
Lubrication system Rollers, idlers, sprocket, pins and bushing,
sealed and permanently lubricated.
TRACK Idlers With hydraulic track adjuster
Carrier roller (each side) 2
Track roller (each side) 7
Track shoe 550 mm (600 mm - 700 mm) Assembly type single grouser, 41 on each
side.
Grouser height 71.4
Link pitch 216 mm
Type Gear type
MAIN HYDRAULIC Capacity at governed
PUMP speed 2121 l/min
Relief valve pressure 190 bar
Type Three spools
Lower - raise - float control.
Blade left and right tilt control.
Available for rear additional implement
control.
MAIN CONTROL
VALVE Specifications Tandem circuit, flow reduction valve on
tilt circuit.
Capacity 70 l/min (nominal), safety valves
on each circuit.
IMPLEMENTS
HYDRAULIC
SYSTEM
FRONT
IMPLEMENT Functions
SINGLE
CONTROL LEVER
HYDRAULIC Type Box type. Joint with fuel tank.
TANK
TECHNICAL DATA TABLES
LH TILT RH TILT
LH TILT RH TILT
LH TILT RH TILT
20. 0 - 72550
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
TECHNICAL DATA TABLES
Suction Immersed in tank, metal gauze and 250
micron filter capacity, with by-pass
(pressure cal. 0.2 bar).
HYDRAULIC
TANK FILTERS Return Immersed in tank, microfiber type and 10
micron filter capacity with by-pass
(pressure cal. 2.5 bar).
Type Double acting. Stroke end valves and
IMPLEMENTS quick drop valves on cylinders heads.
HYDRAULIC
SYSTEM Cylinder bore 110 mm
Piston stroke 1302 mm
LIFT Outiside diameter of
CYLINDERS piston rod 63 mm
Max. distance
between pins 1982 mm
Min. distance
between pins 980 mm
Type Multiple box section with lower reversible
cutting sectors and lower edge reinforced
with ribbings.
Blade support Brace type (tilt cylinder on right).
Equistatic device for uniformstress
distribution on push beams.
.
Blade width 3800 mm
DIMENSIONS
Blade height 1500 mm
Max. lifting height
from ground 1220 mm
Max. lowering depth
from ground 530 mm
Max. tilt 800 mm
IMPLEMENT PERFORMANCE
(BULLDOZER) Cutting angle range 5° 30'
Moldboard volume 7 m3
Raising average
velocity (2100 rpm) 0.371 m/s
Type Double acting
Cilynder bore 160 mm
Piston stroke 140 mm
TILT - HYDR.
CYLINDER Outside diameter of 80 mm
(BULLDOZER) piston rod
Max. distance 1150 mm
between pins
Min. distance 1010 mm
between pins
21. 0 - 8 2550
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
Type Hydraulic angledozer.
Multiple box section with lower reversible
cutting sectors and lower edge reinforced
with ribbings.
Blade support C - frame, welded box section.
.
Blade width 4460 mm
DIMENSIONS
Blade height 1100 mm
Max. lifting height 1300 mm
from ground
Max. lowering depth 560 mm
from ground
Max. tilt 700 mm
PERFORMANCE
Cutting angle range 5°
IMPLEMENT Moldboard volume 4.1 m3
(ANGLEDOZER)
Raising average
velocity (2100 rpm) 0.394 m/s
Type Double acting
Cilynder bore 140 mm
Piston stroke 124 mm
TILT - HYDR.
CYLINDER Outside diameter of 80 mm
(BULLDOZER) piston rod
Max. distance 1569 mm
between pins
Min. distance 1445 mm
between pins
Type Parallelogram type ripper PD20 two dou-
ble acting cylinders. Cylinders support
and tool beam in box section weld fabri-
cated structure (three positions adjust-
able)
N. of shanks 3
Bore x piston rod diameter 125 x 70 mm
IMPLEMENT
(RIPPER) Stroke 590 mm
Closed lenght 1015 mm
Extended lenght 1605 mm
Penetration force 48150 daN
TECHNICAL DATA TABLES
22. 0 - 92550
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
MASS
Engine assembly 1230 kg
Radiator assembly 140 kg
Fuel and hydraulic tank assembly 320 kg
Rear transmission housing 3953 kg
Steering control valve assembly 10 kg
Torque converter assembly –
Transmission assembly 726 kg
Final drive assembly (each side) –
Hull frame assembly 2000 kg
Track frame (each side) 1070 kg
Idler assembly (each side) 230 kg
Track roller assembly (single board) 18.5 kg x 5
Track roller assembly (double board) 19.3 kg x 2
Carrier roller assembly 52 kg x 2
Track shoe assembly (each side) 550 mm wet type 1910 kg
Main control valve assembly 37 kg
Engine flap door 31 kg
Transmission underguard (front) 40 kg
Transmission underguard (rear) 41 kg
Gear box underguard 30 kg
Straight tildozer assembly 1340 kg
Blade angle 1810 kg
Blade HSU 2090 kg
C - frame angle 1460 kg
Tilt cylinder assembly 170 kg
Blade lift cylinder assembly 180 kg x 2
Cab assembly 650 kg
Rops support 644 kg
Battery (each) 49 kg
TECHNICAL DATA TABLES
23. 0 - 10 2550
Carefully read personal and machine SAFETY PRECAUTIONS at the beginning of this Manual
FLUIDS AND LUBRICANTS
REFILL
(International
classification)
Mixture of water and
antifreeze at 50%. The
mixture provides
oxidation, foaming,
corrosion, scaling and
freezing protection
properties down to - 35
°C (- 31 °F).
Diesel fuel ASTM N.2-D
type TT of good quality
and brand
API CH4
ACEA E5
API CH4
ACEA E5
CNH MAT 3505
MS1209
ISO VG-46 DIN
PART 2 HVI
API GL5
MIL - L - 2105 D
API CH4
ACEA E5
–
ATF Type A Suffix A
ALLISON C4
CNH
PRODUCT
PREMIUM
ANTI-FREEZE
MS1710
–
AKCELA NO. 1
ENGINE OIL
AKCELA NO. 1
ENGINE OIL
AKCELA
HY-TRAN®ULTRA
AKCELA
HYDRAULIC
EXCAVATORS
FLUID-MS1230
HYPOIDE 90
AKCELA GEAR
135 HEP
CASE NO. 1
ENGINE OIL
CASE
MOLYDISULFIDE
GREASE
CNH MS1209
HY-TRAN®ULTRA
Q.TY
(Liter)
65
495
18
82
67
100
43
9
–
0.5
AMBIENT
TEMPERATURE
(C°)
–
–
–15 °C ÷ +40 °C
–25 °C ÷ +20 °C
–15 °C ÷ +40 °C
–20 °C ÷ +20 °C
–20 °C ÷ +40 °C
–20 °C ÷ +40 °C
–20 °C ÷ +40 °C
–15 °C ÷ +40 °C
–25 °C ÷ +20 °C
–
–20 °C ÷ +40 °C
VISCOSITY
–
–
SAE 15W-40
SAE 10W-30
SAE 10W-30
SAE 10W
GRADE NT
SAE 80W90
SAE 10W-30
–
SAE 10W
ITEM
COOLING
SYSTEM
FUEL TANK
ENGINE
BEVEL GEAR
STEERING CLUTCHES
BRAKES
CONVERTER AND
TRANSMISSION
HYDRAULIC SYSTEM
ANGLEDOZER VERSION
(mechanical)
FINAL DRIVES
(each)
TRACK IDLERS
AND ROLLERS
GREASE FITTINGS
CAB
TILTING
SYSTEM
TECHNICAL DATA TABLES
Notes: - In case of a lower classification of CH4 engine oil, the
change must be done every 250 hours.
- The change interval must be reduced when present
sulfur in the fuel exceed to 0,5% or the ambient
temperature exceed to 38 °C.
as 0.5% sulfur Normal Service interval
0.5 to 1% Half normal interval
up to 1% One quarter normal interval
If the content of sulfur of the fuel exceeds 0.5%, change the engine
oil as follows: