Radiant Call girls in Dubai O56338O268 Dubai Call girls
Camera specifications pq_criteria
1. 1
Camera Specifications
Table of Contents
1. Camera and VMS Specifications....................................................................................................... 2-6
2. Pre-Qualification Criteria for
Bidder............................................................................................................................................... 7
3. Pre-Qualification Criteria for
OEM................................................................................................................................................. 8
2. CCTV Camera Specifications
2
1. Camera Specifications
S.no Feature Parameter
1 Indoor DOME Camera
a Features 5 MP Indoor Dome Camera
b Sensor type 5 MP, 1/3" CMOS
c Lens 2.8-13.5 mm Remote Zoom –Remote Focus motorized Varifocal
d Light sensitivity-colour 0.1 Lux-Day/Night: 0.01 Lux, IR Sensitive
e Dynamic range 120 dB
f Backlight compensation Yes
g Privacy masking Yes
h Video Compression H.265,H.264, M-JPEG
i Resolution 2592 H x 1944 V
j Frame Rate 30fps
k Network Interface Ethernet 10/100 Mbps, RJ-45
l Power Supply PoE 803
m Illumination Integrated IR of 20 meters range
n Operating Conditions 0 to 50°C at up to 90% RH
o Supported protocols SNMP, IPv6, IPv4, HTTP, HTTPS, SSL,
TCP/IP, UPnP, UDP, RTCP, RTSP, RTP,
SMTP, NTP, DHCP, FTP, 802.1x
p Certifications CE-FCC, Onvif S and G
r Enclosure Type Dome; Indoor
3. CCTV Camera Specifications
3
S.no Feature Parameter
2 Fixed Bullet Camera
a Features 5 MP All in One Bullet Camera
b Sensor type 5 MP,1/2.9" CMOS
c Lens 3.6 mm Fixed Iris Camera
d Light sensitivity-colour 0.1 Lux-Day/Night: 0.01 Lux, IR Sensitive
e Dynamic range 120 dB
f Backlight compensation Yes
g Privacy masking Yes
h Video Compression H.265,H.264, M-JPEG
i Resolution 2592 H x 1944 V
j Frame Rate 30fps
k Network Interface Ethernet 10/100 Mbps, RJ-45
l Power Supply PoE 803
m Illumination Integrated IR of 20 meters range
n Operating Conditions 0 to 50°C at up to 90% RH
o Supported protocols SNMP, IPv6, IPv4, HTTP, HTTPS, SSL,
TCP/IP, UPnP, UDP, RTCP, RTSP, RTP, SMTP, NTP, DHCP, FTP,
802.1x
p Certifications CE-FCC, Onvif S and G
q Streams Up to 8 Individual Streams of at least 3 different types
r Enclosure Type Bullet; IP 66/IK 10
4. CCTV Camera Specifications
4
S.no
Feature
Parameter
3 360 degree Surveillance Multi Sensor Panoramic Camera ( Omni Directional )
a Sensor type 4 x 3MP, 1/3.2" true wdr CMOS - 12MP
b Lens Megapixel Fixed Focal Lens
2.8/4/6/8/12/16mm
c Light sensitivity Colour (Non-Binning): 0.5 Lux @ F2.0
d Light Sensitivity Monochrome 0 Lux, IR sensitive
e WDR 100 DB
f White Balance Auto
g Backlight compensation Required
h AGC, Auto IRIS Required
i Compression MPEG-4 / H.264
j Max Resolution PAL / NTSC
2048 x 1536 (each sensor)
8192 x 1536 (Total)
k Max. frame rate 5/6 Fps
l Network Interface Ethernet 10/100 Mbps
m Operating Temperature 32 to 122˚F / 0 to 50˚C
n Operating Relative humidity 8 - 90% non-condensing
o Environment Indoor/Outdoor IP 66/IK 10
5. CCTV Camera Specifications
5
S.no Feature Parameter
4 Video Recording Server Solution on Type School
a Server Form Factor Appliance Form Factor
b Concurrent Users 5 concurrent users for camera access
c Channels 16 channels with 16 Port Built in POE
d IPs for each camera supports 30 No. of ips from each camera
e Recording Rate Up to 100Mbps
f Display Resolution up to 4K (HDMI) and 1080P (VGA)
g USB ports Front: 2 x USB 2.0 Rear: 2 x USB 2.0 / 2 x USB 3.0
h Audio over IP Supported
i Storage Minimum 2 Drive Bays per Appliance ; 20 TB Storage
j OS Drive Solid State OS Drive (SDD)
k NIC Dual Gigabit Ethernet NIC
l Other Features
Application to support Automatic and Manual Camera
Discovery
Application to support Video Signal Loss Detection
Application to support 16 Channels Live View
Application should support ability to assign User friendly
names to Cameras
Application should support manual configuration of recording
/ viewing modes and streams
Ability to set and change camera image and exposure settings
from the application
Should support RTSP mode of adding cameras
6. CCTV Camera Specifications
6
S.no Feature Parameter
5 Video Recording Server Solution on (Central Site)
a Server Form Factor 2U Rack Mount Form Factor
b Concurrent Users 5 concurrent users for camera access
c Operating System Microsoft Windows 10
d Channels 64 channels set up on a single server unit
e IPs for each camera supports 30 No. of ips from each camera
f CPU Equipped with i7 CPU and Intel Gigabyte Q170 Mainboard which
supports 7th/8th Gen. Intel Core processors and Intel’s vPro
technology
g RAM and Graphics Card 8GB DDR4 RAM and Intel HD Graphic 630 card
h Recording Resolution Up to 4K
i Display Resolution up to 4K with 1 x DVI-D / 1 x DVI-I / 2 x HDMI ports
j USB ports USB 2.0 and 3.0 ports - Front: 2 x USB 2.0 Rear: 2 x USB 2.0 / 4 x
USB 3.0
k Audio over IP Supported
l Storage Minimum 8 Drive Bays per server ; 80 TB storage per
server with RAID 5
m OS Drive Solid State OS Drive (SDD)
n NIC Dual Gigabit Ethernet NIC
o Recording Rate Up to 500bps with RAID
p Other Features
Supports VM setup and architecture
Application to support Automatic and Manual Camera Discovery
Application to support Video Signal Loss Detection
Application to support 64 channel client side live view salvos
Application should support ability to assign User friendly names
to Cameras
Application should support manual configuration of recording /
viewing modes and streams
Ability to set and change camera image and exposure settings
from the application
Should support RTSP mode of adding cameras
7. CCTV Camera Specifications
7
2. Pre-Qualification Criteria for Bidder
PQ# Qualification Criteria Documents to be submitted
PQ1 The bidder should be a company registered under
Indian Companies Act, 1956 or a Partnership Firm
registered under Indian Partnership Act, 1932 or a
Proprietorship firm or Limited Liability Partnership
Firm under Limited Liability Partnership Firm Act
2008.
For companies incorporated in India,
Certificate of Incorporation/
Registration under Companies Act,
1956/2013.
PQ2 The bidder should have average turnover of Rs. 100
Crores in last 3 financial years (i.e. 2014-15, 2015-16
and 2016-17).
Copy of the audited Profit & Loss
Statements for each of the last 3
financial years.
PQ3 The bidder should have a positive net-worth in the
financial year ending on 31/03/2017.
Certificate from the Chartered Accountant.
PQ4
The bidder should have experience of supply of 500
number of cameras for surveillance projects
Copy of work order / purchase order /
contract clearly showing the number of
cameras.
PQ5 Experience of implementing at least 1 Number of
large IT System Integration project (April 2014 –
Till Bid Submission Date) (with project value of Rs
25 Crore or more).
Copy of work order and completion
certificate should be attached.
PQ6 The bidder should submit valid documentary proof
of GST registration number and the details of income
tax registration (PAN).
• Copy of PAN Card
• Copy of GST registration
PQ7 The bidder should be ISO 9001:2015, ISO
27001:2013, CMMi3 certified company. Copies of the ISO and CMMi3 certificates
PQ8 The bidder should not be debarred / black-listed by
Government in India or State Government, at the
time of submission of the bid.
Self-certification by the bidder
8. CCTV Camera Specifications
8
3. Pre-Qualification Criteria for OEM
PQ# Qualification Criteria Documents to be submitted
PQ1 Camera OEM should have 10 years of Global
presence
Company Registration Certificate
PQ2 Camera OEM should have sold 50,000 number of
cameras each year, for last 5 years
Self-attested declaration from OEM
PQ3 Cameras and Video Recording should be from the
same OEM
Self-attested declaration from OEM