CAMELIA SORINA RADOI_en-New

CAMELIA SORINA RĂDOI
F, 02.03.1970, divorced
Adress: str. Energiei, nr.26, Bl.A1, sc.5, ap.90, Cernavoda, Romania
Phone: +40726.19.07.19
Email: soricami_link@yahoo.com
OBJECTIVE To know much, to be better
Job Type Full time
Department: Research&Development, Nuclear, Chemistry/Biotech, Customer/Client Service,
Engineering, Oil&Gas Industry
Residence city: Cernavoda
Working City: Cernavoda
Career Level: Manager/Executive Position
Availability: anytime
WORK EXPERIENCE NPP Operations Chemical Engineer 01.04.1997 - present:
Company: CNE Cernavoda
Working city: Cernavoda, Romania
Department: Chemistry
Company activity field: Energy Industry - Nuclear
Responsibilities:
Professional qualifications:
- 01/04/1997 - 01/10/2001, Nuclear Power Plant (CANDU 600) Cernavoda, Romania,
Chemistry Department - NPP Chemical technician - special chemical analysis.
Chemistry Department - NPP Chemical Engineer in training.
Chemistry Department - NPP Operations Chemical Engineer in training.
- Since 30/10/2005, Nuclear Power Plant (CANDU 600) Cernavoda, Romania, Chemistry
Department - NPP Operations Chemical Engineer, Chemical Control Shift Coordinator, Field
Instructor qualification.
Professional Experience:
1. Good knowledge about the CANDU Nuclear Power Plants systems; Experience in NPP
commissioning, for chemical conditioning and control of the plant systems. Strong skills of
chemical control activities, as Chemical Control Shift Coordinator and Field Instructor.
2. Good knowledge about the CANDU NPP Chemistry:
- Corrosion calculation, corrosion products determination and control of corrosion in the
industrial installation with basic fluids H2O and D2O, mainly using the addition of chemicals;
- Oil and petroleum products analysis, for determination of the solids impurities (solid
particulates - qualitative and quantitative), the viscosity at different temperatures and
the humidity (the water content - quantitative), neutralization number and radioactivity
(radioisotopes using gamma spectrometry and tritium content using the scintillation method);
3. Advanced knowledge of statistics and errors in the laboratory analysis:
- Chemical calculations for preparation of chemical reagents and for chemical dosing
of the process systems for conditioning;
- Interpretation of the results obtained from the systems by different analytical methods
and using different instruments.
4. Advanced knowledge in Analytic Chemistry and Instrumental Analysis:
- Trend analysis;
- Separation methods;
- Gases and liquids chromatography;
- Analytical determination of anions - cations, using UV-VIS and IR spectrometry and
spectroscopy, electrophoresis-electromigration;
- Preparation and verification of reagents and standards according the QA normative;
- Determination of the isotopic concentration using IR spectrometry;

- Determination of the radioisotopes using gamma spectrometry;
- Determination of the tritium content from the gases and the liquids, using the scintillation
method;
- Reactivity control of the CANDU reactor by calculating and addition of fission inhibitors.
5. Capacity to prepare and use technical documentation of:
• Industrial process equipment (field procedures);
• Data sheets;
• Process flow sheets and process flow diagrams for on-line instruments and process
equipment;
• Operational Flowsheets and Operating Manuals.
6. Since 01/04/2001 - part of “Laboratory Information Management System”;
program team, in Chemical Department - a program for computerized centralization of
chemical data, under the guidance of Thermo Lab Systems – UK.
7. Very good knowledge of the rules and regulations of the Safety and Radiation Safety
- green (full) qualification in radioprotection.
8. Advanced knowledge of verification and maintenance of the apparatus and instrumentation
from Chemical Laboratory, (realized according Quality Assurance normative).
9. Good knowledge of the chemical laboratory housekeeping procedures.
10. Good interpersonal, strong communications with technical team skills.
11. Capability and adaptability to work in the stress, overtime and harmful environment
conditions.
12. Good user of the computer. Able to use DOS and Windows applications such as:
text editors (WordPerfect, Word), tabular spreadsheets (Lotus123, QuattroPro, Excel),
databases (FoxPro, MS Access), presentation applications (Power Point), design applications
(CorelDraw), Internet and mailing applications (Internet Explorer, Mozilla Firefox, Ms
Outlook or Outlook Express).
Detailed Job responsibilities: Execution and coordination activities.
Execution:
- chemical control activities - sampling and analyzing the process system fluids to prevent
the corrosion of the systems components, including calculations for chemical dousing
of the systems with anticorrosion additives;
- reactive and standards preparation;
- the laboratory instruments calibration and maintenance.
Coordination:
- chemical control activities specific for a Nuclear Power Plant supervising;
- interface between the execution personnel (of the Laboratory) and the leading staff
or other departments.
NPP Operation Chemical Engineer - Shift Coordinator. Responsibilities;
1. Assuring, in the absence of Chemical Laboratory Chief, the supervising of all activities
effectuated in the laboratory and in afferent spaces of work (sampling and addition points,
materials and chemical products store areas, etc.);
2. Informing the Shift Supervisor about all situations (regarding the chemical control)
with impact on the Plant exploitation or on the environment;
3. Organizing/ coordinating all the specific shift activities (both routines and non-routines
activities);
4. Increasing the chemical parameters monitoring frequencies, in case of abnormal evolution
of those parameters, requesting the corrective actions for bringing the parameters in
specifications and watching the progress of the corrective actions. Identifying and analyzing
the results deviation and giving the logic way for work alternatives and the recommendations
for corrective actions;
5. In abnormal situations, when the approved procedures cannot be followed step by
step (or when did not exist a procedure for that kind of abnormal situation), suggesting
to the Laboratory Supervisor or to the Shift Supervisor the corrective actions, based on data/
result analysis and interpretation and applying the action suggested when having the
authorization;
6. Assuring the accuracy of all the results reported on the shift;

7. Verifying the correctness/ completeness of all data produced on the shift and the correct
registration of these in the approved forms (Data Sheets, Shift Log, Quality Assurance
forms);
8. Following the activities with impact on the chemist status, effectuated by other departments
and taking the necessary corrective actions for parameters affected by the activities in
progress;
9. Collecting of representatives samples from process systems; analyzing the samples
and registering the results; making the calculations for chemical additions and making
the chemical additions, according with the Chemical Control Program and the approved
procedures of chemical control and quality assurance;
10. Making the evaluation, the maintenance, the verifications, the calibrations, the requests
for maintenance/ verification/ standardization for both laboratory and field analytical instruments,
in order to reduce the unavailability periods of the instruments;
11. Preparing and verifying the chemical and radiochemical reagents and the calibration
and verification standards, according to the established instructions and the approved
procedures;
12. Inspecting and making the cleaning/ decontamination activities in the Laboratory
specific areas used on the shift, according with the established housekeeping and
Radioprotection procedures and standards;
13. Requesting for feedback from the coordinated personnel and assuring continuously
informing about the chemical control activities status;
14. Making notes in the Laboratory Shift Log about all the modified monitoring frequencies
and about all the chemical control actions undocumented with approved procedures,
specifying the modified frequencies for parameters monitoring and steps to be followed
in case of official undocumented activities;
16. Verifying the completion of the routines on the shift and the data results attached
at the completed routine sheet. Identifying and involving in the routines effectuation problems
solving (for example, un-effectuated routines analysis/ activity reschedule);
15. Assuring the interface with other departments by requesting/ obtaining information
from other departments personnel and transmitting them to chemical laboratory personnel
involved in chemical control activities;
17. Estimating the chemical control activities necessary personnel in the day/ shift and
establishing (with the Chemical Laboratory Supervisor) the daily personnel timetable;
18. Assuring the laboratory blank forms availability (both in electronic and printed format)
on the shift; assuring the printers, plotters and print paper availability on the shift;
19. Transmitting to the Planning Department the actualized list of urgent Work Request
emitted by Chemical Laboratory;
20. Assuring the chemical substances and materials supply for the specific chemical
control activities on the shift;
21. Assuring the chemical protection and radioprotection equipments availability;
22. Reviewing/ updating the chemical monitoring routines and the data sheets whenever
is necessary;
23. Participating to the daily meeting with the Shift Supervisor, informing about the Plant
problems and requesting support for chemical control problems solving;
24. Calculating the performance indexes of the Plant Chemical Control Program and
reporting their values in “Chemical Laboratory Monthly Report”, involving in
maintaining on schedule of the chemical control indexes, according to Chemical
Laboratory Annual Objectives;
25. Analyzing and suggesting to the Chemical Laboratory Supervisor, new objectives
for chemical control optimization (project modifications, necessary of equipments and
spare parts, etc.);
26. Quarterly, analyzing the necessity to elaborate/ review of the internal procedures
and the specific Laboratory data registration forms;
27. Suggesting to Chemical Laboratory Supervisor new field training procedures/ skills
for Laboratory personnel, for initial or continuous training, depending on personnel performances.
Preparing and examining the personnel in training on field procedures/ skills, in accordance

with the Personnel Training Program, established by the Training Coordinator;
28. Participating to “Chemical Laboratory Activity Auto-Evaluation Program”,
used for improvement of the chemical control performances.
29. Elaborating/ updating of the internal departmental technical documentation (field
procedures for process systems and equipments), data sheets for specific chemical control
activities, flowsheets and Operating Manuals.
Recommendation: - Voicu Alexandru Adrian – ex-Control Room Operator at NPP Cernavoda,
Romania, present - Olkiluoto 3 NPP, Finland
- Zvincu-Popa Vladimir - Shift Supervisor - NPP Cernavoda, Romania. Phone: +40725921321.
- Neagu Madalina Mihaela - colleague - NPP Operations Chemical Engineer NPP Cernavoda,
Romania. Phone: +40745521311.
Achievements:
Achievements:
- The development of the computerized chemical data acquisition, centralization and
management system for industrial applicability, “LIMS” (Laboratory Information Management
System). Since 01/04/2001 - I am a component of team charged with implementation
and development of the “LIMS” Program - an interactive computerized application
for chemical data centralization – under the guidance of Thermo Lab Systems - United
Kingdom. Between 01/10/2002 – 20/02/2008, I was the person from Laboratory staff
charged with the development of LIMS application. Since 20/02/2008, because of my
direct implication in shift chemical control activities coordination, I am a LIMS application
consultant.
- The improvement of the chemical control process efficiency, in order to minimize the
degradation and corrosion of the materials in contact with process fluids. That was possible
by theoretic and practical comparative studies of the plant exploitation conditions and
by systematization of the research results in the specific and easy to use documents,
such as procedures, operating manuals, flow sheets and flow diagrams and technical
specifications.
- The problems with impact on plant exploitation identification and reducing the production
costs and the chemical control process improvement by initialization of corrective actions.
- The team work system improvement by using my personal example of communication
ability/ skill, both on horizontal and vertical interpersonal ways. Proposal and implementation
of the “everyone his trade” work system.
- My personal professional performances continuous improvement: since 1997, when
I was employed at the company where I am working now, I didn’t stop to improve
my professional qualification. That fact is illustrated by my ascension scheme in the company,
including the most important success in my career, obtaining of the NPP Operations Chemical
Engineer attestation, at October 30, 2005.
Benefits:
- transportation/ traveling supported by employer;
- life and health insurance;
- accommodation assured by the employer if the job is in another city/ country than the residence
city of the employee;
- access to one of the Company Internet/ Intranet terminals;
- courses for professional performance improvement, supported by employer.
EDUCATION
Studies:
• University of Bucharest, Faculty of Chemistry
- 1990 -1995 - section Chemistry and Physics; main specialty - Chemistry - teacher, for
teaching on high school level; secondary specialty - Physics teacher, for teaching on
high school level; alternative specialty – research in Analytic Chemistry, Trend Analysis
and Instrumental Analysis.
- graduation project title: “Calculation of radiations doses emitted by the radioactive sources
with different geometric shapes”.
• Territorial Computer Training Center Cernavoda - Hi-Fi Info SRL
- 1994 - computer operating course (MSDOS and WINDOWS)

• Nuclear Power Plant Cernavoda - since 01/04/1997:
- Specific training and practice for operation of CANDU Nuclear Power Plants, especially
regarding the chemical treatment of process systems components, to prevent the corrosion
of the components.
- Safety and Radiation Safety courses - fully qualification in radioprotection, as nuclear
worker.
- Internal authorized as Field Instructor, for specific activities of Chemistry Laboratory.
- Metrological intern authorized.
- Specialization as Operation NPP Engineer, Chemistry.
ABILITIES Foreign Languages(Knowledege level):
english (advanced)
french (medium)
italian (low)
PC Skills:
- Very good user of the computer.
- Able to use MS-DOS and Windows applications: text editors, tabular spreadsheets,
databases, presentation applications, design applications, internet and mailing applications.
- Able to use dedicated software for process systems and laboratory instruments.
Other skills or details that are relevant to CV
Skills - Chemical Engineer :
- Analytic Chemistry, Trend Analysis and Skills - Chemical Engineer:
- Analytic Chemistry, Trend Analysis and Instrumental Analysis – very good experience and
practice.
- Physical Chemistry – good.
- Organic Chemistry – good.
- Inorganic Chemistry and Corrosion (plant chemistry) – very good experience and practice;
- Radiochemistry – very good experience and practice.
- Radiation Control/ Nuclear Safety – very good experience and practice.
- Skills – Computer operation:
- Computer User Instructor -1995 -1996 - Territorial Computer Training Center Cernavoda
HI-FI Info SRL (teaching students for acquaintance with and to use the computer, under
the operating systems DOS and WINDOWS - basic level).
ABOUT ME
1. Which was my biggest professional achievement?
Getting my NPP Operations Chemical Engineer certificate, after a 2 years period of intensive
specific training program, completed with written test (achieved score - 80%) and interview
(achieved score - 100%).
2. Which was my biggest setback?
1998 - an unsuccessful interview for a Nuclear Chemistry Instructor job in NPP Cernavoda
Company, Personnel Training and authorization Department (the equivalent of one Chemistry
Teacher job - the specialization in which I have the University degree), because of my
poor experience in Nuclear Power Plants, at that time.
3. Where do I see myself 5 years from now?
Abroad Romania's borders, working at one powerful and dynamic company.
4. What's my biggest dream? My ideal career?
Manager/ Engineer at one of the most famous company in the world.
5. What job do I consider to suit best?
One dynamic job, in one dynamic and young team, with no interference of the daily routine
and boredom, and which permits contact with people and communication, and with technical
research (for example: Work Plan/ Project/ Team Supervisor, Engineer for Instruments
Service, Research Engineer, Process Engineer, Sales Coordinator, Human Resources,
Laboratory Supervisor) and which may involve travel, conference, exchanges of experience.
6. Describe your ideal company?
A dynamic, stable and attractive (from professional and material point of view) company,
where is dominating the professional performances, correctness and the respect for people

and for the work and which offers career opportunities.
7. Which is the department I would like to work in (if I can make only one choice)?
Nuclear Chemistry Research with industrial application. Explanations:
- Advanced knowledge of Analytical Chemistry and Analytic Methods and of Radiochemistry.
- The ability to put in service, to use, to calibrate and to maintain the laboratory apparatus
and analytical instruments, because of the specific of my actual job and of the experience
accumulated on the job;
- Good experience and practice Radiation Control/ Nuclear Safety;
- I like to inform myself about what is new in the specific technology, I like to study the
secrets of the "older" technology and to share and to learn from the others experience
in this domain of activity;
- I take fast decisions, based on analysis of the situation, putting in balance the advantages
and disadvantages of taking of one decision;
- I am a sociable person, I have practical spirit and I am a workaholic.
8. Description of my personality (hobbies, hopes, the things that motivate
me, my lifestyle and workstyle, etc )
Hobbies:
- computers
- SF films and books and the scientific documenters of Discovery Channel type (from
where and my inclination to applied techniques)
- driving the car.
- interior decoration (I have projected the entire furniture of my apartment using the Corel
Draw platform, because I didn’t know better at that moment the AutoCAD platform).
Aspirations:
- To demonstrate that I can be a good practician of my trade.
- To be someone, to leave behind me a trace of my existence.
Things that motivates me:
- The hope that in one day "I'll be what I want to be when I grow up".
- The fact that my sun admires me and respects my job.
- The fact that I had intensive trained for many years for my trade and that I have faith
in my forces.
- The fact that I wanted to be a chemist since high school (in high school I was awarded
with chemistry ability award at some annual national "trade contests" and I was Olympic at
chemistry, math, and physics).
Lifestyle, work style:
- I am an orderly, calculated person, paying attention to details
- I have practical sense
- I am optimistic and communicative
- I have a cheerful, spontaneous nature, with good sense of humor
- I have a young, enterprising spirit.

CAMELIA SORINA RADOI_en-New

Recommended

Recommended

More Related Content

What's hot

What's hot (8)

Similar to CAMELIA SORINA RADOI_en-New

Similar to CAMELIA SORINA RADOI_en-New (20)

CAMELIA SORINA RADOI_en-New