3M Scotchcast No. 40G Resin is an electrical insulating, two-part polyurethane encapsulating resin. 3M Scotchcast No. 40G insulating resin is mixed in its unique container bag generating its own heat to cure. The nature of the viscosity, which first decreases to allow it to flow into crevices and awkward spots and then increase rapidly to cure, makes it ideal for small cable joints - 40G Scotchcast electrical insulating resin provides mechanical protection and electrical insulation of low voltage electrical cable joints installed in indoor, outdoor, underground and submerged applications.
Cablofil EZ Path provides a complete a certified fire protection seal for cables and pipe entries or penetrations through fire rated walls and floors - Cablofil EZ Path maintains high performance wall and floor fire barrier.
Cablofil EZ Path offers fire protection (240 minutes) for fire rated floor and wall constructions in accordance with BS476 : Part 20 and European Standard EN1366-3.
Cablofil EZ Path - Intumescent Fire Barrier for Cables
Intumescent products expand with heat creating a fire barrier filling any gaps created as combustible through penetrations (ducts, service entries, floor and wall openings) burn away, which otherwise would leave an opening for the passage of toxic smoke, heated gasses and fire. Cablofil EZ Path provides airtight barriers for toxic smoke and gas ensuring personal safety during a fire. Where cables enter a fire barrer wall or floor Cablofil EZ Path firestop materials can be installed to restore an hourly fire-rating.
Two intumescent fire protection pads cushion and compress the cables top and bottom and prevent smoke propagation through the opening even if the intumescent material does not expand (Cold Smoke). Exposed to fire or high temperatures, the intumescent fire barrier responds to flames or heat by rapidly sealing the cable pathway, duct or service entry and preventing passage of flames and smoke. Cablofil EZ Path ensures maximum fire protection and resistance whether it is empty or full - therefore EZ Path provides excellent fire protection with every new or retrofit cable installation.
Built in Future Use - Cablofil EZ Path features a built-in firestopping system that automatically adjusts to the number of cables running through - cables can be added or changed without the need to remove and re-install fire stopping materials.
Cable Tray -cables present in cable tray can provide a source of fuel to propagate fire, release toxic smoke and gases. They create openings that can compromise the fire barrier allowing spread of fire, toxic smoke and superheated gases.
3M Scotchcast Resins are suitable for for low and high voltage electrical insulation and cabling applications. 3M Scotchcast resins have an excellent adhesion to cables and together with excellent mechanical, electrical and chemical resistance.
3M Scotchcast resins are suitable for all sizes and types of cables, cable joints and cable splices with VDE 0291 Part 2 approval.
3M Scotchcast Resins are 100% solids, thermosetting, electrical-grade insulating resins. Classified chemically as either Scotchcast epoxy resins or polyurethane resins, the 3M product line includes two-part epoxy liquids and two part polyurethane liquids.
Scotchcast resins unique electrical and physical properties make them ideal for insulating and protecting electrical/electronic parts and assemblies.
3M Scotchcast physical features also make them suitable for non-electrical, general use applications - for example, as adhesives and sealants.
Find out why you’ll never look at a sling inspection report the same way and why your rigging gear inspection procedures may need an overhaul. This session includes a hands-on demonstration.
Speaker: Mike Riggs, Rigging Institute, LLC
3M Scotchcast No. 4 Epoxy Resin is an electrical insulating, two-part epoxy encapsulating resin. 3M Scotchcast No. 4 epoxy resin is mixed in its unique container bag generating its own heat to cure. The nature of the viscosity, which first decreases to allow it to flow into crevices and awkward spots and then increase rapidly to cure, makes it ideal for small cable joints.
Typical applications for 3M Scotchcast No 4 Epoxy Resin : jointing solid dielectric and oil filled cables up to 8 kV and encapsulating high voltage cable joints up to 69kV.
T&D distribute Ellis Patents cable cleats providing safety critical support to vital cable circuits. Cable cleats must withstand peak short circuit forces generated by the actual cable installation - Ellis Patents 3rd party certified cable cleats provide peace of mind containment of low and high voltage cables.
Ellis Patents are global leaders in the innovation and manufacture of nylon, aluminium and stainless steel cable cleats - EP satisfy the operational requirements of the construction, oil, gas, rail, utilities, wind energy and power generation industries.
Holding Power is Ellis Patents guarantee that EP Cable Cleats will contain dangerous short circuit forces - protecting your people, power and plant. Without fail - specify Ellis Patents Cable Cleats.
Alpha cable cleats contain single core power cables in trefoil formation - lightweight, fast to install, strong and robust with unique design providing labour savings. Short circuit withstand test : 31.4kA RMS (72.4kA peak).
Vulcan cable cleats for single, trefoil, quadrafoil and bundled cable installations - suits LV, 11kV-33kV BS6622 and BS7870 Triplex high voltage cables.
Made from stainless steel for non corrosive, high strength and permanent utility cable cleating with compact design.
Ellis Patents are a leading voice in the campaign to have cable cleats reclassified as short-circuit protection devices. A move that would mean cable cleats would be placed on a parallel with fuses and circuit breakers. "This reclassification makes absolute sense. In the event of a cable fault, the forces between cables reach their peak in the first quarter cycle, which is the point that cable cleats earn their crust. In contrast, circuit breakers typically interrupt the fault after 3 or even 5 cycles by which time, if the cable cleats are underspecified, the cables will no longer be secure, but will be putting vital electrical installations and lives at unnecessary risk," says Paul Nolan UK Sales Manager, EP.
3M Scotchcast No. 40G Resin is an electrical insulating, two-part polyurethane encapsulating resin. 3M Scotchcast No. 40G insulating resin is mixed in its unique container bag generating its own heat to cure. The nature of the viscosity, which first decreases to allow it to flow into crevices and awkward spots and then increase rapidly to cure, makes it ideal for small cable joints - 40G Scotchcast electrical insulating resin provides mechanical protection and electrical insulation of low voltage electrical cable joints installed in indoor, outdoor, underground and submerged applications.
Cablofil EZ Path provides a complete a certified fire protection seal for cables and pipe entries or penetrations through fire rated walls and floors - Cablofil EZ Path maintains high performance wall and floor fire barrier.
Cablofil EZ Path offers fire protection (240 minutes) for fire rated floor and wall constructions in accordance with BS476 : Part 20 and European Standard EN1366-3.
Cablofil EZ Path - Intumescent Fire Barrier for Cables
Intumescent products expand with heat creating a fire barrier filling any gaps created as combustible through penetrations (ducts, service entries, floor and wall openings) burn away, which otherwise would leave an opening for the passage of toxic smoke, heated gasses and fire. Cablofil EZ Path provides airtight barriers for toxic smoke and gas ensuring personal safety during a fire. Where cables enter a fire barrer wall or floor Cablofil EZ Path firestop materials can be installed to restore an hourly fire-rating.
Two intumescent fire protection pads cushion and compress the cables top and bottom and prevent smoke propagation through the opening even if the intumescent material does not expand (Cold Smoke). Exposed to fire or high temperatures, the intumescent fire barrier responds to flames or heat by rapidly sealing the cable pathway, duct or service entry and preventing passage of flames and smoke. Cablofil EZ Path ensures maximum fire protection and resistance whether it is empty or full - therefore EZ Path provides excellent fire protection with every new or retrofit cable installation.
Built in Future Use - Cablofil EZ Path features a built-in firestopping system that automatically adjusts to the number of cables running through - cables can be added or changed without the need to remove and re-install fire stopping materials.
Cable Tray -cables present in cable tray can provide a source of fuel to propagate fire, release toxic smoke and gases. They create openings that can compromise the fire barrier allowing spread of fire, toxic smoke and superheated gases.
3M Scotchcast Resins are suitable for for low and high voltage electrical insulation and cabling applications. 3M Scotchcast resins have an excellent adhesion to cables and together with excellent mechanical, electrical and chemical resistance.
3M Scotchcast resins are suitable for all sizes and types of cables, cable joints and cable splices with VDE 0291 Part 2 approval.
3M Scotchcast Resins are 100% solids, thermosetting, electrical-grade insulating resins. Classified chemically as either Scotchcast epoxy resins or polyurethane resins, the 3M product line includes two-part epoxy liquids and two part polyurethane liquids.
Scotchcast resins unique electrical and physical properties make them ideal for insulating and protecting electrical/electronic parts and assemblies.
3M Scotchcast physical features also make them suitable for non-electrical, general use applications - for example, as adhesives and sealants.
Find out why you’ll never look at a sling inspection report the same way and why your rigging gear inspection procedures may need an overhaul. This session includes a hands-on demonstration.
Speaker: Mike Riggs, Rigging Institute, LLC
3M Scotchcast No. 4 Epoxy Resin is an electrical insulating, two-part epoxy encapsulating resin. 3M Scotchcast No. 4 epoxy resin is mixed in its unique container bag generating its own heat to cure. The nature of the viscosity, which first decreases to allow it to flow into crevices and awkward spots and then increase rapidly to cure, makes it ideal for small cable joints.
Typical applications for 3M Scotchcast No 4 Epoxy Resin : jointing solid dielectric and oil filled cables up to 8 kV and encapsulating high voltage cable joints up to 69kV.
T&D distribute Ellis Patents cable cleats providing safety critical support to vital cable circuits. Cable cleats must withstand peak short circuit forces generated by the actual cable installation - Ellis Patents 3rd party certified cable cleats provide peace of mind containment of low and high voltage cables.
Ellis Patents are global leaders in the innovation and manufacture of nylon, aluminium and stainless steel cable cleats - EP satisfy the operational requirements of the construction, oil, gas, rail, utilities, wind energy and power generation industries.
Holding Power is Ellis Patents guarantee that EP Cable Cleats will contain dangerous short circuit forces - protecting your people, power and plant. Without fail - specify Ellis Patents Cable Cleats.
Alpha cable cleats contain single core power cables in trefoil formation - lightweight, fast to install, strong and robust with unique design providing labour savings. Short circuit withstand test : 31.4kA RMS (72.4kA peak).
Vulcan cable cleats for single, trefoil, quadrafoil and bundled cable installations - suits LV, 11kV-33kV BS6622 and BS7870 Triplex high voltage cables.
Made from stainless steel for non corrosive, high strength and permanent utility cable cleating with compact design.
Ellis Patents are a leading voice in the campaign to have cable cleats reclassified as short-circuit protection devices. A move that would mean cable cleats would be placed on a parallel with fuses and circuit breakers. "This reclassification makes absolute sense. In the event of a cable fault, the forces between cables reach their peak in the first quarter cycle, which is the point that cable cleats earn their crust. In contrast, circuit breakers typically interrupt the fault after 3 or even 5 cycles by which time, if the cable cleats are underspecified, the cables will no longer be secure, but will be putting vital electrical installations and lives at unnecessary risk," says Paul Nolan UK Sales Manager, EP.
Nuhas is the first and only cable producer in the Middle East to have been certified by DNV, Norway as capable of manufacturing power, control and instrumentation cables for shipboard, high speed/light craft and off-shore cables.
Prysmian offers a comprehensive range of flexible cable solutions with Class 5 conductors for fixed installations. With Flexible XLPE and Fire Performance cables, Prysmian has a full suite of cables for the entire Construction market.
Silicon Cables Suppliers in Vadodara | Shreelight Power Pvt. Ltd.ShreeLight Power
These are single or multicore cable suitable for extreme temperature conditions.
They find their application in steel industries, cement industries, glass industries, ship buildings, and aviation.
Our range of World-class HV, MV and LV Cables includes Single & Multi Core Armoured and Un-armoured
Cables, Specialty, Control, Instrumentation and also LSF, FRLS, LSOH & Custom Cables to meet the
requirements of a broad spectrum of applications
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
2. Slips, trips & falls
•cause 25% of all workplace liability accidents*
•95% of major slips & trips cause broken bones*
•causes dropped objects
•causes falls from heights
* Source: www.hse.gov.uk –HSENI Annual Report
3. CableSafe Safetyhooks
1.Easy suspend cables, wires & hoses
2.Simple effective S-shape
3.Contributes to a safe work culture
4.Efficient cable management
–replacing temporary cables
–cable life extension by reduced wear
–prevents environmental spills
4. Industrial Housekeeping
1.Policy for most multinationals
2.Cable management is an absolute requirement
3.Cable(Safe) management: “Avoid slips & trips by suspension of cables, hoses and temporary equipment using S-hooks.” *
* Source: Total and DSM safety procedures
5. CableSafe Safetyhooks
Application during maintenance, turnaround, construction and industrial works
Industries: refineries, chemical plants, shipbuilding, electrical power stations, festivals, wind/solar energy, mining and nuclear installations
6. CableSafe Safetyhooks
Non-conductiveof electricity
High UV resistance
Heat resistant: -20 to 200°C, or -4 to -392°F
Load: 40-300 kg, or 88–600 lbs
Material: glass reinforced polyester
14. CableSafe®specifications
Model
6"
9"
12"
15"
Cable opening size
47 mm
70 mm
95 mm
120 mm
Maximum load
40 kg
(88 lbs)
55 kg
(121 lbs)
190 kg
(418 lbs)
300 kg
(661 lbs)
Weight
55 grams (0.12 lbs)
105 grams (0.23 lbs)
350 grams (0.77 lbs)
650 grams (1.43 lbs)
Workingtemperature
from -20°C (-4°F) up to 200°C (392°F)
Material
Glass reinforced polyester
Standard availablecolors
WhiteYellow * company specific colors and company name on request