Broucher 21.12.15
•
0 likes•161 views
Thulir Vacuum Technologies is an Indian company that manufactures and supplies various vacuum equipment such as rotary pumps, diffusion pumps, vacuum coating units, vacuum ovens and furnaces, pneumatic valves, dosing systems, DC power supplies, sputtering systems, vacuum gauges, and thickness monitors. It was established in 2006 and serves research laboratories and departments across universities and research organizations in India. The company's clients include professors from IISc Bangalore, IIT Madras, Pondicherry University, IIT Kanpur, and research establishments like ISRO.
Report
Share
Report
Share
Download to read offline
Recommended
Vacuum Oven Round by ACMAS Technologies Pvt Ltd.
Vacuum ovens- vacuum oven manufacturers, round vacuum ovens, vacuum ovens India, vacuum oven suppliers, vacuum oven manufacturers India, laboratory vacuum ovens, vacuum oven exporters India, round vacuum ovens, vacuum ovens India, vacuum round oven, vacuum oven suppliers India. For More Information Please Logon http://cutt.us/YTl4
Oven incubator - vacuum oven
This document presents information on three types of laboratory ovens: a hot air oven, bacteriological incubator, and vacuum oven. The hot air oven has a stainless steel interior, intelligent temperature controller, forced air circulation for even heating, and temperature range of 10°C above ambient to 250°C. The bacteriological incubator also has a stainless steel interior and round corners for easy cleaning, with a temperature range of 5°C above ambient to 65°C and digital timer of 1 to 9999 minutes. The vacuum oven features over-temperature protection, double-layer tempered glass door, silicone rubber seal for high vacuum, temperature range of 10°C above ambient to 250°C, and vacuum degree of 133Pa.
Thesis
This document is the thesis submitted by Christopher Parmar to Gujarat Technological University in partial fulfillment of the requirements for a Master of Engineering degree. The thesis describes the design, modeling, simulation and development of a laboratory prototype of a full-bridge DC-DC converter for driving a piezoelectric actuator for space applications. The thesis includes literature review on piezoelectric actuators and drive techniques, an overview of switch mode power converters, modeling and simulation of a full-bridge driver and flyback converter in MATLAB, digitally controlled PWM generation using an FPGA, and development of a reduced scale laboratory prototype of the full-bridge converter.
4th_International_Conference_on_Multidis.pdf
This document summarizes a paper that compares image mining and data mining techniques. Image mining is the process of extracting meaningful information from images using techniques from data mining and machine learning. While data mining uses structured data, image mining works with unstructured visual data from images. The paper explores the differences between the two fields, such as image mining having to first extract features from images before applying data mining algorithms, while data mining works directly with structured data. It also discusses challenges that are unique to image mining like the need for large training datasets and computational complexity of computer vision algorithms.
4th international conference on multidisciplinary research & practice (4ICMRP...
Conference Proceeding of 4th International Conference on Multidisciplinary Research & Practice ( 4ICMRP 2017)
List of registred participants of icc2015
The document contains a list of 1399 registered participants for ICC 2015. It includes their registration ID, name, organization, and city. The majority of participants are from institutions located in Ahmedabad, Aligarh, Amravati, Aurangabad, Bangalore, Bhopal, and Chandigarh. A wide range of organizations are represented, including universities, colleges, and research institutions.
project[1].pdf
- Four final year engineering students at Rohini College of Engineering and Technology in Tamil Nadu, India are proposing a student project to develop a low-cost ventilator with blood oxygen monitoring capabilities.
- The ventilator will be designed using an Arduino microcontroller to provide respiratory support during pandemic situations when traditional ventilators are scarce. It will incorporate oxygen saturation and pressure sensors to monitor patient vitals.
- The goals of the project are to create an affordable emergency ventilator that can deliver controlled airflow to patients' lungs while displaying oxygen readings on an LCD screen and triggering alarms if issues arise. All design details and code will be openly shared.
RECENT ADVANCES IN MATERIALS, MANUFACTUR-ING AND MACHINE LEARNING
This document announces an international conference on "Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML-2022)" to be held on April 26-27, 2022 in Nagpur, India. The conference aims to bring together industrial and academic professionals to share innovations and research in materials, manufacturing, and machine learning. Papers are invited for presentation and publication in relevant journals and book chapters. Important dates and registration details are provided.
Recommended
Vacuum Oven Round by ACMAS Technologies Pvt Ltd.
Vacuum ovens- vacuum oven manufacturers, round vacuum ovens, vacuum ovens India, vacuum oven suppliers, vacuum oven manufacturers India, laboratory vacuum ovens, vacuum oven exporters India, round vacuum ovens, vacuum ovens India, vacuum round oven, vacuum oven suppliers India. For More Information Please Logon http://cutt.us/YTl4
Oven incubator - vacuum oven
This document presents information on three types of laboratory ovens: a hot air oven, bacteriological incubator, and vacuum oven. The hot air oven has a stainless steel interior, intelligent temperature controller, forced air circulation for even heating, and temperature range of 10°C above ambient to 250°C. The bacteriological incubator also has a stainless steel interior and round corners for easy cleaning, with a temperature range of 5°C above ambient to 65°C and digital timer of 1 to 9999 minutes. The vacuum oven features over-temperature protection, double-layer tempered glass door, silicone rubber seal for high vacuum, temperature range of 10°C above ambient to 250°C, and vacuum degree of 133Pa.
Thesis
This document is the thesis submitted by Christopher Parmar to Gujarat Technological University in partial fulfillment of the requirements for a Master of Engineering degree. The thesis describes the design, modeling, simulation and development of a laboratory prototype of a full-bridge DC-DC converter for driving a piezoelectric actuator for space applications. The thesis includes literature review on piezoelectric actuators and drive techniques, an overview of switch mode power converters, modeling and simulation of a full-bridge driver and flyback converter in MATLAB, digitally controlled PWM generation using an FPGA, and development of a reduced scale laboratory prototype of the full-bridge converter.
4th_International_Conference_on_Multidis.pdf
This document summarizes a paper that compares image mining and data mining techniques. Image mining is the process of extracting meaningful information from images using techniques from data mining and machine learning. While data mining uses structured data, image mining works with unstructured visual data from images. The paper explores the differences between the two fields, such as image mining having to first extract features from images before applying data mining algorithms, while data mining works directly with structured data. It also discusses challenges that are unique to image mining like the need for large training datasets and computational complexity of computer vision algorithms.
4th international conference on multidisciplinary research & practice (4ICMRP...
Conference Proceeding of 4th International Conference on Multidisciplinary Research & Practice ( 4ICMRP 2017)
List of registred participants of icc2015
The document contains a list of 1399 registered participants for ICC 2015. It includes their registration ID, name, organization, and city. The majority of participants are from institutions located in Ahmedabad, Aligarh, Amravati, Aurangabad, Bangalore, Bhopal, and Chandigarh. A wide range of organizations are represented, including universities, colleges, and research institutions.
project[1].pdf
- Four final year engineering students at Rohini College of Engineering and Technology in Tamil Nadu, India are proposing a student project to develop a low-cost ventilator with blood oxygen monitoring capabilities.
- The ventilator will be designed using an Arduino microcontroller to provide respiratory support during pandemic situations when traditional ventilators are scarce. It will incorporate oxygen saturation and pressure sensors to monitor patient vitals.
- The goals of the project are to create an affordable emergency ventilator that can deliver controlled airflow to patients' lungs while displaying oxygen readings on an LCD screen and triggering alarms if issues arise. All design details and code will be openly shared.
RECENT ADVANCES IN MATERIALS, MANUFACTUR-ING AND MACHINE LEARNING
This document announces an international conference on "Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML-2022)" to be held on April 26-27, 2022 in Nagpur, India. The conference aims to bring together industrial and academic professionals to share innovations and research in materials, manufacturing, and machine learning. Papers are invited for presentation and publication in relevant journals and book chapters. Important dates and registration details are provided.
Curriculum vitae
Sowmiya Vijayaraghavan has an M.Tech in Industrial Biotechnology from National Institute of Technology, Surathkal with 90.6% and a B.Tech in Biotechnology from Vel Tech High Tech Dr.Rangarajan Dr.Sakunthala Engineering College, Chennai with 91.3%. She has work experience in areas such as environmental engineering, immunology, cell culture, and nanotechnology. She has published papers in peer-reviewed journals and attended various workshops, conferences, and seminars. Her skills include laboratory techniques as well as languages.
brouchermodhhgjjgfhvffghhhgffffffhhhhgfffffddff
The document announces the 3rd National Conference on Materials and Mechanical Engineering (NCMME 2015) that will take place on April 10-11, 2015. It will be organized by the Department of Mechanical Engineering at Dr. Mahalingam College of Engineering and Technology in Pollachi, Tamil Nadu, India. The conference aims to provide a platform for researchers, students, faculty and industry practitioners to discuss advancements in materials and mechanical engineering. Topics will include materials processing, tribology, manufacturing, design optimization, finite element analysis, CAD/CAM/CAE, vibrations, fluids and more. Participants must submit a registration form along with payment by the specified deadlines to attend. Boarding and lodging
BrittanyManuel_NoHurtTeam
The document describes a proposed device called the No-Hurt Insert to continuously monitor the position of an endotracheal tube (ETT). Current methods for checking ETT placement like chest x-rays and auscultation have limitations. The device would use an ultrasonic proximity sensor attached to the ETT to directly measure the distance to the carina and alert medical staff if the tube is misplaced. Early prototypes were tested in a model trachea and successfully detected movement of the simulated carina. Further work is needed to miniaturize the sensor and integrate it into a full ETT device that meets necessary safety and design standards before clinical use.
RTMT 2015 Natonal Conference Abstract Proceedings
This document contains messages and details regarding the National Conference on "Recent Trends in Manufacturing Technology" being organized by the Department of Manufacturing Engineering, Anna University, Chennai from April 16-17, 2015. The conference has received support from the Vice Chancellor, Registrar, Dean and other officials of Anna University. Invited lectures will be delivered by experts from industries and research organizations on both days of the conference. Technical sessions will cover various topics related to design, manufacturing processes, industrial engineering, and materials joining. Over 40 papers will be presented at the conference.
Vol3 issue2 aug14 international journal of nanoscience and technology
biannual and peer-reviewed Journal published by
Academic and Research Publications in Collaboration
with JPMS Society.
Brochure icamen 2019
International Conference on Advances in Mechanical Engineering and Nanotechnology.
Department of Mechanical Engineering, Manipal University Jaipur takes the privilege to announce the first edition of International Conference on Mechanical Engineering and Nanotechnology (ICAMEN) in association with Universiti Malaysia Pahang, Malaysia which will be held during March 08-09, 2019 at Manipal University Jaipur, India.
ICAMEN 2019 is a two days’ event aims to showcase state-of-the-art methodologies and technologies in Mechanical Engineering and Nanotechnology. It focuses new ideas and paves way to disseminate latest innovations and practices. It facilitates opportunities to network, collaborate and exchange ideas with renowned leaders, scientists and researchers in Mechanical Engineering and Nanotechnology. It acts as crucial platform for industry and academia to foster innovative ideas, theories, frameworks and applications. ICAMEN 2019 will encourage on recent and futuristic advancements, challenges and new strategies in frontiers of Mechanical Engineering and Nanotechnology.
Selected research articles will be submitted in following journals for possible publication after peer review process as a special issue.
• International Journal of Automotive and Mechanical Engineering
• Journal of Mechanical Engineering and Sciences
• Springer Nature Applied Sciences, Springer
• Journal of Production Engineering
• Journal of Machining and Forming Technology.
All other accepted and presented research articles will be published in AIP Conferences Proceedings indexed in Scopus.
Journal-ert
This document reviews the application of electrical resistance tomography (ERT) for conducting vessel walls. ERT is a non-invasive tomography technique that has advantages for industrial process monitoring applications. The document discusses the evolution of ERT techniques for conducting vessels over decades of research. It presents different ERT measurement strategies and challenges for conducting boundaries. It also addresses electrode fabrication and designs for effective ERT systems on conducting vessel walls.
Final Report Content
The document describes an existing integrated refinery fire and gas monitoring system that uses wired connections between field devices and the control room. The existing system has limitations such as increased wiring complexity and costs as more sensors are added over time. This can make troubleshooting difficult. The proposed system aims to develop a wireless monitoring system using ZigBee technology to overcome these limitations and enhance safety. It will allow real-time monitoring of gas levels, location tracking of workers, and danger alarms to be sent wirelessly.
NCCE Upcoming Event
The document announces an international conference on emerging technologies to be held from February 20-22, 2014 in Panipat, Haryana, India. It provides information on the conference objectives, topics, organizers and advisory committee members. It also includes details on paper submissions, important dates, participation fees, accommodation and contact information. The conference aims to provide opportunities for academicians and professionals to share and receive feedback on their research through presentations and discussions.
Ultrasonic Clamp On Insertion Flow Meter.pdf
Manas Microsystems is India’s leading Ultrasonic Flow Meter manufacturer and supplier company. We have been recognized as one of India’s Top Flow Meter manufacturers recently. A comprehensive range of ultrasonic flow meters is available from us, including Bulk Type Ultrasonic Flow Meters, Clamp-on Type Ultrasonic Flow Meters, and Insertion Ultrasonic Flow Meters, Portable Ultrasonic Water Flow Meter and Handheld Ultrasonic Water Flow Meter. For the volumetric metering of water, ultrasonic flow meters have been used in businesses and markets for a long time.
Many engineers are interested in knowing how an ultrasonic flow meter works.
There are two types of Ultrasonic Flow Meters. One works on the Transit Time or Time of Flight principle. The second one works on the Doppler Effect principle.
Manas makes Transit Time-based Ultrasonic Flow Meters.
The transit time meter is used for clear liquids or liquids having very low levels of undissolved solids.
Features
Advanced DSP technology and the multi-pulse Transducer technology
Special Type Insertion Transducers allow solids to pass through the pipe within the effect on the meter. Y-strainers or filtering devices are not needed.
Digital cross-correlation technology
Provides easy and low-cost installation on the outside of the existing piping system without cutting the pipe section.
Clear, user-friendly, and convenient to use
A pair of sensors can satisfy different materials and wide pipe diameters.
2 lines of display can display total flow, flow rate, velocity, and meter run status. Parallel operation of positive, negative, and net flow totalize with scale factor and 7 digit display, while the output of totalize pulse and frequency output are transmitted via the open collector.
U.S., British and Metric measurement units are available
Application
Water, sewage (with low particle content), and seawater
Water supply and drainage water
Process liquids; Liquors
Pipeline leak detection
Power plant
Metallurgy, Laboratory
Energy conservation, economize on water
Water used in Food and Pharma
Heat measures, Heat balance
57th National Convention of IIIE & 3rd International Conference of IE
This document lists the advisory committee members for the 3rd International Conference on Industrial Engineering being held from November 26-28, 2015 in Surat, India. It includes over 70 professors, doctors, and industry professionals from countries such as India, USA, China, Hong Kong, France, Malaysia, Denmark, UAE, Qatar, and Turkey who will provide guidance and support to the conference. The conference is being organized by the Indian Institution of Industrial Engineering and hosted by the Sardar Vallabhbhai National Institute of Technology in Surat, India.
Biomedical projects
This document lists 84 potential biomedical engineering project titles. It provides contact information for an organization called Expert Systems and Solutions (ESS) that offers online coaching, jobs, training, and research related to various engineering fields including biomedical engineering. The document encourages exploring additional areas on their website for power systems, electronics, and other project titles.
IEEE International Conference on Recent Advances in Energy-efficient Computi...
ICRAECC-2019
7th & 8th March 2019
Organized by
Department of Electronics and Communication Engineering
St. Xavier’s Catholic College of Engineering
report final.pdf
The document describes a project to design a low-cost mechanical ventilator for COVID-19 patients. It provides background on the increased demand for ventilators due to the pandemic and the resulting ventilator shortage. The project aims to help address this issue by developing an open-source, low-cost ventilator using commercially available spare components. It will also track patient lung health in real-time using pressure data from the ventilator to inform doctors of the patient's condition. Laboratory experiments were conducted to demonstrate the benefits of the designed ventilator.
NCETMS-2016 PROCEEDINGS
This document provides information about the National Conference on "Emerging Trends in Mathematical Sciences" (NCETMS-2016) organized by the Department of Humanities and Science at S.A. Engineering College. The conference aimed to provide a platform for researchers and scientists to exchange ideas, discuss developments in computational mathematics, and explore new opportunities. A total of 193 papers were submitted across various areas of mathematics and 142 were selected for presentation after peer review. The document includes details about the conference themes, committees, institution organizing it, and objectives of the event.
Pub pat13r2 share
Brian D. Wilson is an inventor who holds numerous US and international patents related to medical diagnostic devices and laboratory automation. Some of his key patents include methods and systems for automated immunochemistry analysis, sample aliquot storage, sample presentation, and test sample loading. He has also published extensively on topics related to manufacturing, laboratory automation, and clinical analyzer interfaces.
STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...
Stretchable strain sensor has large number of applications in various fields. For
example, pressure measure gadgets , structural health-monitoring. Flexible and
stretchable strain sensor also used in electronic circuit and machine for the detection
human motion and convert data in the form of human readable information They
can be used as wearable gadgets that are directly attached to human body or
clothing for the body strain measured These ultra-sensitive sensors can detect
actions as small as breathing and heartbeat to huge strain-induced body joint
bending and straightening. Additionally, these sensitive strain sensors are beneficial
for observing the robot activity and motion detection
P.T.SARAVANAKUMAR RESUME
Dr. P.T.Saravanakumar received his PhD in Mechanical Engineering from Anna University, Chennai in 2015. He has obtained his Masters Degree in Energy Engineering from PSG College of Technology in 2001 and Bachelor’s degree in Mechanical Engineering from Bharathiyar University in 1998 and. Also, he has completed MBA from Bharathiyar University in 2016. He has about 18.4 years of teaching experience and has
handled courses on Fluid Mechanics, Strength of Materials, Engineering Thermodynamics, Heat and Mass Transfer, Thermal Engineering, Finite Element Analysis, Computational Fluid Dynamics. He has published twenty two research papers in reputed International Journals and Conferences. He is the member in the reviewer of four Elsevier Journals. He has delivered many guest lectures on Computational Fluid Dynamics & Finite Element Analysis in various colleges. He has published five books, viz. Manufacturing Technology-I, Engineering Practice Laboratory and Engineering Graphics. Life time member in ISTE,IE,ISHRAE.He has published two patents & Copyrights.
International Conference on Latest Trends in Engineering Science and Management
The International Conference on “INTERNATIONAL CONFERENCE ON EMERGING TRENDS OF ENGINEERING SCIENCE MNAGEMENT AND ITS APPLICATIONS(ICETESMA-16)" aims at bringing together the researchers, scientists, engineers, and scholar students in all areas of Engineering and Technology, Science, Management and Humanities and provides an international forum for the dissemination of original research results, new ideas and practical development experiences which concentrate on both theory and practices.
Isolation and Expression Analysis of Gene TAMYB1R40 during
The document provides information about the World Academy of Science, Engineering and Technology (WASET) international conference taking place on June 20-21, 2013 in Toronto, Canada.
The objective of the conference is to bring together leading scientists, researchers and practitioners from academia and industry to present recent advances in science, engineering and technology and discuss future trends. Selected papers will be considered for publication in special journal issues.
The conference will include oral presentations over three sessions on June 20th and 21st covering topics such as manufacturing, heat transfer, mechanics, materials science and more. There will also be poster presentations grouped into three sessions.
The document provides details on registration, the conference program, presenters and chairs
More Related Content
Similar to Broucher 21.12.15
Curriculum vitae
Sowmiya Vijayaraghavan has an M.Tech in Industrial Biotechnology from National Institute of Technology, Surathkal with 90.6% and a B.Tech in Biotechnology from Vel Tech High Tech Dr.Rangarajan Dr.Sakunthala Engineering College, Chennai with 91.3%. She has work experience in areas such as environmental engineering, immunology, cell culture, and nanotechnology. She has published papers in peer-reviewed journals and attended various workshops, conferences, and seminars. Her skills include laboratory techniques as well as languages.
brouchermodhhgjjgfhvffghhhgffffffhhhhgfffffddff
The document announces the 3rd National Conference on Materials and Mechanical Engineering (NCMME 2015) that will take place on April 10-11, 2015. It will be organized by the Department of Mechanical Engineering at Dr. Mahalingam College of Engineering and Technology in Pollachi, Tamil Nadu, India. The conference aims to provide a platform for researchers, students, faculty and industry practitioners to discuss advancements in materials and mechanical engineering. Topics will include materials processing, tribology, manufacturing, design optimization, finite element analysis, CAD/CAM/CAE, vibrations, fluids and more. Participants must submit a registration form along with payment by the specified deadlines to attend. Boarding and lodging
BrittanyManuel_NoHurtTeam
The document describes a proposed device called the No-Hurt Insert to continuously monitor the position of an endotracheal tube (ETT). Current methods for checking ETT placement like chest x-rays and auscultation have limitations. The device would use an ultrasonic proximity sensor attached to the ETT to directly measure the distance to the carina and alert medical staff if the tube is misplaced. Early prototypes were tested in a model trachea and successfully detected movement of the simulated carina. Further work is needed to miniaturize the sensor and integrate it into a full ETT device that meets necessary safety and design standards before clinical use.
RTMT 2015 Natonal Conference Abstract Proceedings
This document contains messages and details regarding the National Conference on "Recent Trends in Manufacturing Technology" being organized by the Department of Manufacturing Engineering, Anna University, Chennai from April 16-17, 2015. The conference has received support from the Vice Chancellor, Registrar, Dean and other officials of Anna University. Invited lectures will be delivered by experts from industries and research organizations on both days of the conference. Technical sessions will cover various topics related to design, manufacturing processes, industrial engineering, and materials joining. Over 40 papers will be presented at the conference.
Vol3 issue2 aug14 international journal of nanoscience and technology
biannual and peer-reviewed Journal published by
Academic and Research Publications in Collaboration
with JPMS Society.
Brochure icamen 2019
International Conference on Advances in Mechanical Engineering and Nanotechnology.
Department of Mechanical Engineering, Manipal University Jaipur takes the privilege to announce the first edition of International Conference on Mechanical Engineering and Nanotechnology (ICAMEN) in association with Universiti Malaysia Pahang, Malaysia which will be held during March 08-09, 2019 at Manipal University Jaipur, India.
ICAMEN 2019 is a two days’ event aims to showcase state-of-the-art methodologies and technologies in Mechanical Engineering and Nanotechnology. It focuses new ideas and paves way to disseminate latest innovations and practices. It facilitates opportunities to network, collaborate and exchange ideas with renowned leaders, scientists and researchers in Mechanical Engineering and Nanotechnology. It acts as crucial platform for industry and academia to foster innovative ideas, theories, frameworks and applications. ICAMEN 2019 will encourage on recent and futuristic advancements, challenges and new strategies in frontiers of Mechanical Engineering and Nanotechnology.
Selected research articles will be submitted in following journals for possible publication after peer review process as a special issue.
• International Journal of Automotive and Mechanical Engineering
• Journal of Mechanical Engineering and Sciences
• Springer Nature Applied Sciences, Springer
• Journal of Production Engineering
• Journal of Machining and Forming Technology.
All other accepted and presented research articles will be published in AIP Conferences Proceedings indexed in Scopus.
Journal-ert
This document reviews the application of electrical resistance tomography (ERT) for conducting vessel walls. ERT is a non-invasive tomography technique that has advantages for industrial process monitoring applications. The document discusses the evolution of ERT techniques for conducting vessels over decades of research. It presents different ERT measurement strategies and challenges for conducting boundaries. It also addresses electrode fabrication and designs for effective ERT systems on conducting vessel walls.
Final Report Content
The document describes an existing integrated refinery fire and gas monitoring system that uses wired connections between field devices and the control room. The existing system has limitations such as increased wiring complexity and costs as more sensors are added over time. This can make troubleshooting difficult. The proposed system aims to develop a wireless monitoring system using ZigBee technology to overcome these limitations and enhance safety. It will allow real-time monitoring of gas levels, location tracking of workers, and danger alarms to be sent wirelessly.
NCCE Upcoming Event
The document announces an international conference on emerging technologies to be held from February 20-22, 2014 in Panipat, Haryana, India. It provides information on the conference objectives, topics, organizers and advisory committee members. It also includes details on paper submissions, important dates, participation fees, accommodation and contact information. The conference aims to provide opportunities for academicians and professionals to share and receive feedback on their research through presentations and discussions.
Ultrasonic Clamp On Insertion Flow Meter.pdf
Manas Microsystems is India’s leading Ultrasonic Flow Meter manufacturer and supplier company. We have been recognized as one of India’s Top Flow Meter manufacturers recently. A comprehensive range of ultrasonic flow meters is available from us, including Bulk Type Ultrasonic Flow Meters, Clamp-on Type Ultrasonic Flow Meters, and Insertion Ultrasonic Flow Meters, Portable Ultrasonic Water Flow Meter and Handheld Ultrasonic Water Flow Meter. For the volumetric metering of water, ultrasonic flow meters have been used in businesses and markets for a long time.
Many engineers are interested in knowing how an ultrasonic flow meter works.
There are two types of Ultrasonic Flow Meters. One works on the Transit Time or Time of Flight principle. The second one works on the Doppler Effect principle.
Manas makes Transit Time-based Ultrasonic Flow Meters.
The transit time meter is used for clear liquids or liquids having very low levels of undissolved solids.
Features
Advanced DSP technology and the multi-pulse Transducer technology
Special Type Insertion Transducers allow solids to pass through the pipe within the effect on the meter. Y-strainers or filtering devices are not needed.
Digital cross-correlation technology
Provides easy and low-cost installation on the outside of the existing piping system without cutting the pipe section.
Clear, user-friendly, and convenient to use
A pair of sensors can satisfy different materials and wide pipe diameters.
2 lines of display can display total flow, flow rate, velocity, and meter run status. Parallel operation of positive, negative, and net flow totalize with scale factor and 7 digit display, while the output of totalize pulse and frequency output are transmitted via the open collector.
U.S., British and Metric measurement units are available
Application
Water, sewage (with low particle content), and seawater
Water supply and drainage water
Process liquids; Liquors
Pipeline leak detection
Power plant
Metallurgy, Laboratory
Energy conservation, economize on water
Water used in Food and Pharma
Heat measures, Heat balance
57th National Convention of IIIE & 3rd International Conference of IE
This document lists the advisory committee members for the 3rd International Conference on Industrial Engineering being held from November 26-28, 2015 in Surat, India. It includes over 70 professors, doctors, and industry professionals from countries such as India, USA, China, Hong Kong, France, Malaysia, Denmark, UAE, Qatar, and Turkey who will provide guidance and support to the conference. The conference is being organized by the Indian Institution of Industrial Engineering and hosted by the Sardar Vallabhbhai National Institute of Technology in Surat, India.
Biomedical projects
This document lists 84 potential biomedical engineering project titles. It provides contact information for an organization called Expert Systems and Solutions (ESS) that offers online coaching, jobs, training, and research related to various engineering fields including biomedical engineering. The document encourages exploring additional areas on their website for power systems, electronics, and other project titles.
IEEE International Conference on Recent Advances in Energy-efficient Computi...
ICRAECC-2019
7th & 8th March 2019
Organized by
Department of Electronics and Communication Engineering
St. Xavier’s Catholic College of Engineering
report final.pdf
The document describes a project to design a low-cost mechanical ventilator for COVID-19 patients. It provides background on the increased demand for ventilators due to the pandemic and the resulting ventilator shortage. The project aims to help address this issue by developing an open-source, low-cost ventilator using commercially available spare components. It will also track patient lung health in real-time using pressure data from the ventilator to inform doctors of the patient's condition. Laboratory experiments were conducted to demonstrate the benefits of the designed ventilator.
NCETMS-2016 PROCEEDINGS
This document provides information about the National Conference on "Emerging Trends in Mathematical Sciences" (NCETMS-2016) organized by the Department of Humanities and Science at S.A. Engineering College. The conference aimed to provide a platform for researchers and scientists to exchange ideas, discuss developments in computational mathematics, and explore new opportunities. A total of 193 papers were submitted across various areas of mathematics and 142 were selected for presentation after peer review. The document includes details about the conference themes, committees, institution organizing it, and objectives of the event.
Pub pat13r2 share
Brian D. Wilson is an inventor who holds numerous US and international patents related to medical diagnostic devices and laboratory automation. Some of his key patents include methods and systems for automated immunochemistry analysis, sample aliquot storage, sample presentation, and test sample loading. He has also published extensively on topics related to manufacturing, laboratory automation, and clinical analyzer interfaces.
STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...
Stretchable strain sensor has large number of applications in various fields. For
example, pressure measure gadgets , structural health-monitoring. Flexible and
stretchable strain sensor also used in electronic circuit and machine for the detection
human motion and convert data in the form of human readable information They
can be used as wearable gadgets that are directly attached to human body or
clothing for the body strain measured These ultra-sensitive sensors can detect
actions as small as breathing and heartbeat to huge strain-induced body joint
bending and straightening. Additionally, these sensitive strain sensors are beneficial
for observing the robot activity and motion detection
P.T.SARAVANAKUMAR RESUME
Dr. P.T.Saravanakumar received his PhD in Mechanical Engineering from Anna University, Chennai in 2015. He has obtained his Masters Degree in Energy Engineering from PSG College of Technology in 2001 and Bachelor’s degree in Mechanical Engineering from Bharathiyar University in 1998 and. Also, he has completed MBA from Bharathiyar University in 2016. He has about 18.4 years of teaching experience and has
handled courses on Fluid Mechanics, Strength of Materials, Engineering Thermodynamics, Heat and Mass Transfer, Thermal Engineering, Finite Element Analysis, Computational Fluid Dynamics. He has published twenty two research papers in reputed International Journals and Conferences. He is the member in the reviewer of four Elsevier Journals. He has delivered many guest lectures on Computational Fluid Dynamics & Finite Element Analysis in various colleges. He has published five books, viz. Manufacturing Technology-I, Engineering Practice Laboratory and Engineering Graphics. Life time member in ISTE,IE,ISHRAE.He has published two patents & Copyrights.
International Conference on Latest Trends in Engineering Science and Management
The International Conference on “INTERNATIONAL CONFERENCE ON EMERGING TRENDS OF ENGINEERING SCIENCE MNAGEMENT AND ITS APPLICATIONS(ICETESMA-16)" aims at bringing together the researchers, scientists, engineers, and scholar students in all areas of Engineering and Technology, Science, Management and Humanities and provides an international forum for the dissemination of original research results, new ideas and practical development experiences which concentrate on both theory and practices.
Isolation and Expression Analysis of Gene TAMYB1R40 during
The document provides information about the World Academy of Science, Engineering and Technology (WASET) international conference taking place on June 20-21, 2013 in Toronto, Canada.
The objective of the conference is to bring together leading scientists, researchers and practitioners from academia and industry to present recent advances in science, engineering and technology and discuss future trends. Selected papers will be considered for publication in special journal issues.
The conference will include oral presentations over three sessions on June 20th and 21st covering topics such as manufacturing, heat transfer, mechanics, materials science and more. There will also be poster presentations grouped into three sessions.
The document provides details on registration, the conference program, presenters and chairs
Similar to Broucher 21.12.15 (20)
Vol3 issue2 aug14 international journal of nanoscience and technology
Vol3 issue2 aug14 international journal of nanoscience and technology
57th National Convention of IIIE & 3rd International Conference of IE
57th National Convention of IIIE & 3rd International Conference of IE
IEEE International Conference on Recent Advances in Energy-efficient Computi...
IEEE International Conference on Recent Advances in Energy-efficient Computi...
STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...
STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...
International Conference on Latest Trends in Engineering Science and Management
International Conference on Latest Trends in Engineering Science and Management
Isolation and Expression Analysis of Gene TAMYB1R40 during
Isolation and Expression Analysis of Gene TAMYB1R40 during
Broucher 21.12.15
- 1. Manufacturers of : * Rotary Pumps * Diffusion Pumps * Vacuum Coating Units * Vacuum Ovens & Furnaces * Pneumatic Right Angle Valves * Dosing System * DC Power Supplies * Sputtering Systems (DC & RF) * Pirani & Penning Gauges * Digital Thickness Monitor * Pneumatic Buttery Valves * Dosing Pumps Mob: +91 94444 97216 / +91 86082 48099 Email : thulirvacuumtech@gmail.com No:10/7, Nethaji street, (Near Post Office), Ekka uthangal, Chennai - 600 032. OFFICE & FACTORY : Phone : +91 94444 97216 / +91 86082 48099 Email : thulirvacuumtech@gmail.com Web : WWW.thulirvacuum.com VACUUMTECHNOLOGIES Vacuum Pumps Vacuum Systems Measuring Instruments Accessories VACUUM TECHNOLOGIES Analog Penning Gauge Analog Pirani Gauge Digital Thickness Monitor Digital Penning Gauge Digital Pirani Gauge Accessaries UHV Eletrode Chamber inner view Cathode Ass. Buttery Valves Clamps CF Flange CF Flange E.B. Gun Power Supply Measuring Instruments VACUUM TECHNOLOGIES
- 2. About THULIR VACUUM Technologies THULIR VACUUM Technologies is one of the major vacuum equipment providers for the research development departments of numerous universities, research laboratories, and department of space, electronics, material science nuclear research. It was started in the 2006 by a group of highly qualied and experienced engineers based in V.R.Technologies Bangalore. Diffusion Pump Belt Drive Dosing Pump (mech) Air Cooled Diffusion Pump Our Clients As we are the major equipment providers we are catering to the various research establishments over nation wide and our clients are satised with our prompt after sale services and updated technology. Prof. G. Mohan Rao, Dept. Of ISU, IISc, Bangalore Prof. S. Mohan, Dept. Of ISU IISc, Bangalore Prof. Kasiviswanathan, IIT Madras Prof. Ramachandra Rao, MSRC IIT-Madras Prof. N.Harish Kumar, IIT-Madras, Prof. Somnath Chanda Roy, IIT-Madras Prof. Sathiya Narayanan, Pondichery University Prof. Anatharamakrishna, IIT Kanpur Prof. S. Kasturirangan Dept. Of CCT IISc, Bangalore Prof. Rajanna, Dept. Of ISU IISc, Bangalore Prof. K.T. Ramakrishna Reddy, Dept. Of Physics SVU Tirupathi Prof. V. Rajagopal Reddy, Dept. Of Physics SVU Tirupathi Prof. Udaya Shankar, NITK Suratkal Dr.B. Subramanian, CECRI Karaikudi Prof. Manoj Varma, CeNSE, IISc, Bangalore Prof. M.G. Krishna, University of Hydrabad Prof. S. Uttanna, Dept. Of Physics SVU Tirupathi Prof. Shridhar Reddy, Dept. Of Physics SVU Tirupathi Prof. O.Md. Husain, Dept. Of Physics SVU Tirupathi Prof. Vijayalakshmi, Dept. Of Physics SVU Tirupathi Prof. Shivakumar, Anna University Chennai Prof. P. Venkateswaran, University of Madras Dr. Ravidass, Bishop Heber Trichy Dr. Gunasekar, IISc, Bangalore Dr. C. K. Ramesha, Bits Pilani, Goa Dr. Jayaram, SSCU - IISc Prof. T.K. Nanda, MRC - IISc Dr. Ambarish Ghosh, CeNSE - IISc Prof. Sanjeeviraja, Dept. of Physics Alagappa University Karaikudi Dr. Venkatasubbaiah, Yogi Vemana, Kadapa ISRO, BHEL, BEL, HAN, NAL, and MTRDC, Bangalore Vacuum Systems Vacuum Pumps Rotary Pump Tubular FurnaceDosing Pump (electronic) Vacuum Coating Unit DC Sputtering Unit DC RF Sputtering UnitVacuum Pumping System VACUUM TECHNOLOGIES VACUUM TECHNOLOGIES VACUUM TECHNOLOGIES Email : thulirvacuumtech@gmail.com Web : WWW.thulirvacuum.com VACUUMTECHNOLOGIES