This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers. It includes technical specifications, safety regulations, descriptions of indicators and controls, operating instructions, maintenance instructions, and troubleshooting information. Safety is emphasized, including intended and prohibited uses of the machines, and potential hazards are outlined.
Bomag bw138 ac single tandem vibratory roller service repair manualpfiskdmjekm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 125 ADH, BW 135 AD, BW 138 AD, BW 138 AC. It includes technical specifications, safety information, descriptions of controls, operating procedures, maintenance schedules and procedures, and troubleshooting tips. The document is intended for operators and maintenance personnel and aims to ensure safe and proper use of the machines.
Bomag bw 211 d 4 single drum roller service repair manualfjskekdmmem
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes sections on safety regulations, indicators and controls, operation, maintenance, and troubleshooting. The technical data section specifies the machine's dimensions, weights, travel characteristics, engine details, and other specifications. Safety is a primary focus, with warnings about only using the machine as intended and following all instructions.
Bomag bw213 d 4 single drum roller service repair manualfjsjekkmdmme
- The document provides safety regulations and instructions for operating a single drum roller. It outlines potential dangers, proper use of the machine, who is allowed to operate it, and safety precautions to take before and during operation such as checking for defects and ensuring no one is near the machine. Unauthorized modifications are prohibited and all safety stickers and markings must be kept legible.
Bomag bw 141 ad 4 tandem rollers service repair manualpfiskdmjekm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It covers safety regulations, descriptions of indicators and controls, operating instructions, and maintenance procedures. The technical data section provides specifications for each roller model.
Bomag bw 211 d 4 single drum roller service repair manualfjskekazswdmme
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes safety regulations, descriptions of indicators and controls, operating procedures, maintenance schedules and tasks, and troubleshooting information. The technical specifications section details the model number, dimensions, weights, engine information, and other technical details. Safety is emphasized, including proper use of safety equipment, training requirements for operators, and inspection of guards and structures.
Bomag bw 211 pd 4 single drum roller service repair manualujdkdkdmdm
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes sections on safety regulations, indicators and controls, operation, maintenance, and troubleshooting. The introduction emphasizes the importance of following the instructions to safely and properly operate the machine. It also notes that only original spare parts should be used.
Bomag bw 211 pd 4 single drum roller service repair manualfjskekazswdmme
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes safety regulations, descriptions of indicators and controls, operating procedures, maintenance schedules and tasks, and troubleshooting information. The technical specifications section details the model number, dimensions, weights, engine information, and other technical details. Safety is emphasized, including proper use of safety equipment, training requirements for operators, and inspection of guards and structures.
Bomag bw 211 d 4 single drum roller service repair manualujdkdkdmdm
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes safety regulations, descriptions of indicators and controls, operating procedures, maintenance schedules and tasks, and troubleshooting information. The technical specifications section details the model, dimensions, weights, engine, and other technical features. Safety is emphasized, including proper use, authorized operators, and ensuring the ROPS structure is in good condition.
Bomag bw138 ac single tandem vibratory roller service repair manualpfiskdmjekm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 125 ADH, BW 135 AD, BW 138 AD, BW 138 AC. It includes technical specifications, safety information, descriptions of controls, operating procedures, maintenance schedules and procedures, and troubleshooting tips. The document is intended for operators and maintenance personnel and aims to ensure safe and proper use of the machines.
Bomag bw 211 d 4 single drum roller service repair manualfjskekdmmem
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes sections on safety regulations, indicators and controls, operation, maintenance, and troubleshooting. The technical data section specifies the machine's dimensions, weights, travel characteristics, engine details, and other specifications. Safety is a primary focus, with warnings about only using the machine as intended and following all instructions.
Bomag bw213 d 4 single drum roller service repair manualfjsjekkmdmme
- The document provides safety regulations and instructions for operating a single drum roller. It outlines potential dangers, proper use of the machine, who is allowed to operate it, and safety precautions to take before and during operation such as checking for defects and ensuring no one is near the machine. Unauthorized modifications are prohibited and all safety stickers and markings must be kept legible.
Bomag bw 141 ad 4 tandem rollers service repair manualpfiskdmjekm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It covers safety regulations, descriptions of indicators and controls, operating instructions, and maintenance procedures. The technical data section provides specifications for each roller model.
Bomag bw 211 d 4 single drum roller service repair manualfjskekazswdmme
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes safety regulations, descriptions of indicators and controls, operating procedures, maintenance schedules and tasks, and troubleshooting information. The technical specifications section details the model number, dimensions, weights, engine information, and other technical details. Safety is emphasized, including proper use of safety equipment, training requirements for operators, and inspection of guards and structures.
Bomag bw 211 pd 4 single drum roller service repair manualujdkdkdmdm
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes sections on safety regulations, indicators and controls, operation, maintenance, and troubleshooting. The introduction emphasizes the importance of following the instructions to safely and properly operate the machine. It also notes that only original spare parts should be used.
Bomag bw 211 pd 4 single drum roller service repair manualfjskekazswdmme
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes safety regulations, descriptions of indicators and controls, operating procedures, maintenance schedules and tasks, and troubleshooting information. The technical specifications section details the model number, dimensions, weights, engine information, and other technical details. Safety is emphasized, including proper use of safety equipment, training requirements for operators, and inspection of guards and structures.
Bomag bw 211 d 4 single drum roller service repair manualujdkdkdmdm
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes safety regulations, descriptions of indicators and controls, operating procedures, maintenance schedules and tasks, and troubleshooting information. The technical specifications section details the model, dimensions, weights, engine, and other technical features. Safety is emphasized, including proper use, authorized operators, and ensuring the ROPS structure is in good condition.
Bomag bw 211 pd 4 single drum roller service repair manualfjskekdmmem
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes safety regulations, descriptions of indicators and controls, operating instructions, maintenance instructions, and troubleshooting information. The technical data section specifies the dimensions, weights, travel characteristics, engine details, and other specifications of the roller.
Bomag bw 161 adcv tandem rollers service repair manualfjjskmdmem
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, including:
- Technical specifications for various BOMAG roller models including dimensions, weights, engine details, and more.
- Safety regulations and guidelines for operating the rollers.
- Descriptions of the roller controls and instrumentation.
- Procedures for operating the rollers including starting, driving, stopping, and activating functions like vibration and sprinkling systems.
- Maintenance instructions and schedules covering tasks like checking fluid levels, changing filters, lubricating parts, and winterizing.
Bomag bw 161 adcv tandem rollers service repair manualikdkdmddm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The safety regulations section stresses the importance of only using the machine as intended and following all safety instructions to avoid risks to people and property.
Bomag bw 151 ad 4 tandem rollers service repair manualfjjskmdmem
This document contains operating and maintenance instructions for BOMAG tandem vibratory rollers, including:
1) Technical specifications for various BOMAG roller models including dimensions, weights, engine details, and fuel/fluid capacities.
2) Safety regulations and guidelines for operating the rollers.
3) Descriptions of the roller controls and instrumentation.
4) Procedures for operating the rollers including starting, driving, braking and shutting down.
5) Routine maintenance instructions including checking fluid levels, changing filters, lubricating parts, and adjusting components.
6) Troubleshooting tips for engine and mechanical issues.
Bomag bw 151 ad 4 tandem rollers service repair manualfhjsjkdmemm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The safety section emphasizes that the machine must only be used for its intended purposes of compacting asphalt and soil and stresses the importance of following all safety instructions.
Bomag bw 151 ac 4 tandem rollers service repair manualikdkdmddm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The technical data section specifies the dimensions, weights, performance characteristics, and other technical specifications of the roller models.
Bomag bw 151 ac 4 tandem rollers service repair manualfjjskmdmem
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, including:
- Technical specifications for various BOMAG roller models including dimensions, weights, engine details, and more.
- Safety regulations and guidelines for operating the rollers.
- Descriptions of the roller controls and instrumentation.
- Procedures for operating the rollers including starting, driving, stopping, and activating accessories.
- Maintenance instructions and schedules covering tasks like checking fluid levels, changing filters, lubricating parts, and winterizing.
- Troubleshooting tips for engine and other issues.
Bomag bw 151 ac 4 tandem rollers service repair manualfhjsjkdmemm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The safety section emphasizes that the machine must only be used for its intended purposes of compacting asphalt and soil and stresses the importance of following all safety instructions.
Bomag bw 151 ad 4 tandem rollers service repair manualikdkdmddm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The safety section emphasizes that the machine must only be used for its intended purposes of compacting asphalt and soil and stresses the importance of following all safety instructions.
Bomag bw 154 ad tandem rollers service repair manualfhjsjkdmemm
This document provides technical data and adjustment values for Tandem Rollers including the BW 141 AD, BW 154 AD, and BW 154 AD AM. It includes specifications for the Deutz diesel engine like power output, idle speeds, and valve clearances. It also lists components of the travel, vibration, and steering systems along with their types, displacement volumes, pressure settings, and other parameters. Filling capacities are provided for engine oil, hydraulic oil, and other fluids.
Bomag bw 154 ac 4 tandem rollers service repair manualfhjsjkdmemm
The document provides technical specifications and adjustment values for Tandem Rollers models BW 141 AD Serie 4 and BW 154 AD Serie 4. It includes details on the engine, travel pump, travel motors, drum reduction gear, vibration pump, vibration motor, steering and charge pump, and filling capacities. The specifications are broken out by component and include information like component type, system, displacement, pressure levels, speeds, ratios, and approved lubricants.
Bomag bw 151 ad tandem rollers service repair manualfhjsjkdmemm
This document provides technical data and adjustment values for Tandem Rollers including the BW 141 AD, BW 154 AD, and BW 154 AD AM. It includes specifications for the Deutz diesel engine like power output, idle speeds, and valve clearances. It also lists components of the travel, vibration, and steering systems along with their types, displacement volumes, pressure settings, and other parameters. Filling capacities are provided for engine oil, hydraulic oil, and other fluids.
Bomag bw 141 ad 4 tandem rollers service repair manualfhjsjkdmemm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The technical data section specifies the dimensions, weights, engine, and other technical specifications for each roller model.
Bomag bw 141 ad tandem rollers service repair manualfhjsjkdmemm
This document provides technical data and adjustment values for Tandem Rollers including the BW 141 AD, BW 154 AD, and BW 154 AD AM. It includes specifications for the Deutz diesel engine like power output, idle speeds, and valve clearances. It also lists components of the travel, vibration, and steering systems along with their types, displacement volumes, pressure settings, and other parameters. Filling capacities are provided for engine oil, hydraulic oil, and other fluids.
Bomag bw 141 ac 4 tandem rollers service repair manualfhjsjkdmemm
This document provides technical data and adjustment values for Tandem Rollers including the BW 141 AD Serie 4, BW 154 AD Serie 4, and BW 154 AD AM Serie 4. It includes specifications for the Deutz diesel engine, travel pump and motors, vibration pump and motors, steering pump, and filling capacities. The data is presented in a table format with specifications such as engine power, pump displacement volumes, pressure settings, and fluid capacities.
Bomag bw 135 ad single tandem vibratory roller service repair manualfhjsjkdmemm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers. It includes technical specifications, safety regulations, descriptions of indicators and controls, operating instructions, maintenance instructions, and troubleshooting information. Safety is emphasized, including intended and prohibited uses of the machines, and potential hazards are outlined.
Hyundai r170 w 7a wheel excavator service repair manualfhjsjkdmemm
The document provides instructions for removing and installing a swing motor, disassembling and assembling the swing motor, removing and installing a reduction gear, and disassembling and assembling the reduction gear of an excavator. The summary is as follows:
1. The removal and installation instructions for the swing motor include disconnecting hoses and mounting bolts, and removing the swing motor assembly. Installation is the reverse of removal.
2. Disassembling the swing motor involves removing components like the valve, casing, piston, and shaft. Assembly is the reverse of disassembly.
3. Removal and installation of the reduction gear involves slinging and removing/installing mounting bolts.
Caterpillar cat 336 f excavator (prefix dsw) service repair manual (dsw00001 ...fhjsjkdmemm
This document provides instructions for disassembling the travel motor on 336F and 336F L excavator models. It outlines 27 steps to fully disassemble the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, friction plates, seals, springs, and other internal components. Detailed illustrations are provided to identify each part mentioned in the procedure. Safety precautions are noted throughout to warn of potential spring forces or fluid containment. The goal is to break down the travel motor into its core components while maintaining the correct orientation of parts for reassembly.
Caterpillar cat 336 d2 l excavator (prefix ycf) service repair manual (ycf000...fhjsjkdmemm
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other internal components. Safety warnings are provided to prevent injury from spring forces.
Caterpillar cat 336 d2 l excavator (prefix xbh) service repair manual (xbh000...fhjsjkdmemm
The document provides instructions for installing a swivel on an excavator. It describes using lifting devices and tools to position the swivel. O-rings and seals are installed on the swivel housing and rotor before assembling them together. Bolts are used to secure the parts and the swivel is tested for leaks by applying air pressure. Finally, hoses and fittings are reconnected to complete the installation.
Caterpillar cat 336 d2 l excavator (prefix wdc) service repair manual (wdc000...fhjsjkdmemm
The document provides instructions for assembling a piston motor. It details 17 steps to install various parts like bearings, seals, springs, and retaining rings. Safety precautions are included to properly handle parts under spring tension. The assembly ends by installing the head and bolts.
Caterpillar cat 336 d2 l excavator (prefix wbc) service repair manual (wbc000...fhjsjkdmemm
The document provides instructions for removing and installing various engine components, including:
- Valve guides are removed from the cylinder head using a valve guide driver tool. New guides are installed using driver tools until the proper height is reached.
- Valve seat inserts are removed from the cylinder head using extractors. New inserts are installed using a driver tool after being cooled.
- The engine oil filter base, oil filter, and oil cooler are removed. Hoses are disconnected and bolts removed to access these components.
More Related Content
Similar to Bomag bw138 ac single tandem vibratory roller service repair manual
Bomag bw 211 pd 4 single drum roller service repair manualfjskekdmmem
This document provides operating and maintenance instructions for a BOMAG single drum roller. It includes safety regulations, descriptions of indicators and controls, operating instructions, maintenance instructions, and troubleshooting information. The technical data section specifies the dimensions, weights, travel characteristics, engine details, and other specifications of the roller.
Bomag bw 161 adcv tandem rollers service repair manualfjjskmdmem
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, including:
- Technical specifications for various BOMAG roller models including dimensions, weights, engine details, and more.
- Safety regulations and guidelines for operating the rollers.
- Descriptions of the roller controls and instrumentation.
- Procedures for operating the rollers including starting, driving, stopping, and activating functions like vibration and sprinkling systems.
- Maintenance instructions and schedules covering tasks like checking fluid levels, changing filters, lubricating parts, and winterizing.
Bomag bw 161 adcv tandem rollers service repair manualikdkdmddm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The safety regulations section stresses the importance of only using the machine as intended and following all safety instructions to avoid risks to people and property.
Bomag bw 151 ad 4 tandem rollers service repair manualfjjskmdmem
This document contains operating and maintenance instructions for BOMAG tandem vibratory rollers, including:
1) Technical specifications for various BOMAG roller models including dimensions, weights, engine details, and fuel/fluid capacities.
2) Safety regulations and guidelines for operating the rollers.
3) Descriptions of the roller controls and instrumentation.
4) Procedures for operating the rollers including starting, driving, braking and shutting down.
5) Routine maintenance instructions including checking fluid levels, changing filters, lubricating parts, and adjusting components.
6) Troubleshooting tips for engine and mechanical issues.
Bomag bw 151 ad 4 tandem rollers service repair manualfhjsjkdmemm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The safety section emphasizes that the machine must only be used for its intended purposes of compacting asphalt and soil and stresses the importance of following all safety instructions.
Bomag bw 151 ac 4 tandem rollers service repair manualikdkdmddm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The technical data section specifies the dimensions, weights, performance characteristics, and other technical specifications of the roller models.
Bomag bw 151 ac 4 tandem rollers service repair manualfjjskmdmem
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, including:
- Technical specifications for various BOMAG roller models including dimensions, weights, engine details, and more.
- Safety regulations and guidelines for operating the rollers.
- Descriptions of the roller controls and instrumentation.
- Procedures for operating the rollers including starting, driving, stopping, and activating accessories.
- Maintenance instructions and schedules covering tasks like checking fluid levels, changing filters, lubricating parts, and winterizing.
- Troubleshooting tips for engine and other issues.
Bomag bw 151 ac 4 tandem rollers service repair manualfhjsjkdmemm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The safety section emphasizes that the machine must only be used for its intended purposes of compacting asphalt and soil and stresses the importance of following all safety instructions.
Bomag bw 151 ad 4 tandem rollers service repair manualikdkdmddm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The safety section emphasizes that the machine must only be used for its intended purposes of compacting asphalt and soil and stresses the importance of following all safety instructions.
Similar to Bomag bw138 ac single tandem vibratory roller service repair manual (9)
Bomag bw 154 ad tandem rollers service repair manualfhjsjkdmemm
This document provides technical data and adjustment values for Tandem Rollers including the BW 141 AD, BW 154 AD, and BW 154 AD AM. It includes specifications for the Deutz diesel engine like power output, idle speeds, and valve clearances. It also lists components of the travel, vibration, and steering systems along with their types, displacement volumes, pressure settings, and other parameters. Filling capacities are provided for engine oil, hydraulic oil, and other fluids.
Bomag bw 154 ac 4 tandem rollers service repair manualfhjsjkdmemm
The document provides technical specifications and adjustment values for Tandem Rollers models BW 141 AD Serie 4 and BW 154 AD Serie 4. It includes details on the engine, travel pump, travel motors, drum reduction gear, vibration pump, vibration motor, steering and charge pump, and filling capacities. The specifications are broken out by component and include information like component type, system, displacement, pressure levels, speeds, ratios, and approved lubricants.
Bomag bw 151 ad tandem rollers service repair manualfhjsjkdmemm
This document provides technical data and adjustment values for Tandem Rollers including the BW 141 AD, BW 154 AD, and BW 154 AD AM. It includes specifications for the Deutz diesel engine like power output, idle speeds, and valve clearances. It also lists components of the travel, vibration, and steering systems along with their types, displacement volumes, pressure settings, and other parameters. Filling capacities are provided for engine oil, hydraulic oil, and other fluids.
Bomag bw 141 ad 4 tandem rollers service repair manualfhjsjkdmemm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 141 AD-4, BW 151 AD-4, BW 151 AC-4, and BW 161 ADCV. It includes sections on safety regulations, controls and indicators, operation, maintenance, and troubleshooting. The technical data section specifies the dimensions, weights, engine, and other technical specifications for each roller model.
Bomag bw 141 ad tandem rollers service repair manualfhjsjkdmemm
This document provides technical data and adjustment values for Tandem Rollers including the BW 141 AD, BW 154 AD, and BW 154 AD AM. It includes specifications for the Deutz diesel engine like power output, idle speeds, and valve clearances. It also lists components of the travel, vibration, and steering systems along with their types, displacement volumes, pressure settings, and other parameters. Filling capacities are provided for engine oil, hydraulic oil, and other fluids.
Bomag bw 141 ac 4 tandem rollers service repair manualfhjsjkdmemm
This document provides technical data and adjustment values for Tandem Rollers including the BW 141 AD Serie 4, BW 154 AD Serie 4, and BW 154 AD AM Serie 4. It includes specifications for the Deutz diesel engine, travel pump and motors, vibration pump and motors, steering pump, and filling capacities. The data is presented in a table format with specifications such as engine power, pump displacement volumes, pressure settings, and fluid capacities.
Bomag bw 135 ad single tandem vibratory roller service repair manualfhjsjkdmemm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers. It includes technical specifications, safety regulations, descriptions of indicators and controls, operating instructions, maintenance instructions, and troubleshooting information. Safety is emphasized, including intended and prohibited uses of the machines, and potential hazards are outlined.
Hyundai r170 w 7a wheel excavator service repair manualfhjsjkdmemm
The document provides instructions for removing and installing a swing motor, disassembling and assembling the swing motor, removing and installing a reduction gear, and disassembling and assembling the reduction gear of an excavator. The summary is as follows:
1. The removal and installation instructions for the swing motor include disconnecting hoses and mounting bolts, and removing the swing motor assembly. Installation is the reverse of removal.
2. Disassembling the swing motor involves removing components like the valve, casing, piston, and shaft. Assembly is the reverse of disassembly.
3. Removal and installation of the reduction gear involves slinging and removing/installing mounting bolts.
Caterpillar cat 336 f excavator (prefix dsw) service repair manual (dsw00001 ...fhjsjkdmemm
This document provides instructions for disassembling the travel motor on 336F and 336F L excavator models. It outlines 27 steps to fully disassemble the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, friction plates, seals, springs, and other internal components. Detailed illustrations are provided to identify each part mentioned in the procedure. Safety precautions are noted throughout to warn of potential spring forces or fluid containment. The goal is to break down the travel motor into its core components while maintaining the correct orientation of parts for reassembly.
Caterpillar cat 336 d2 l excavator (prefix ycf) service repair manual (ycf000...fhjsjkdmemm
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other internal components. Safety warnings are provided to prevent injury from spring forces.
Caterpillar cat 336 d2 l excavator (prefix xbh) service repair manual (xbh000...fhjsjkdmemm
The document provides instructions for installing a swivel on an excavator. It describes using lifting devices and tools to position the swivel. O-rings and seals are installed on the swivel housing and rotor before assembling them together. Bolts are used to secure the parts and the swivel is tested for leaks by applying air pressure. Finally, hoses and fittings are reconnected to complete the installation.
Caterpillar cat 336 d2 l excavator (prefix wdc) service repair manual (wdc000...fhjsjkdmemm
The document provides instructions for assembling a piston motor. It details 17 steps to install various parts like bearings, seals, springs, and retaining rings. Safety precautions are included to properly handle parts under spring tension. The assembly ends by installing the head and bolts.
Caterpillar cat 336 d2 l excavator (prefix wbc) service repair manual (wbc000...fhjsjkdmemm
The document provides instructions for removing and installing various engine components, including:
- Valve guides are removed from the cylinder head using a valve guide driver tool. New guides are installed using driver tools until the proper height is reached.
- Valve seat inserts are removed from the cylinder head using extractors. New inserts are installed using a driver tool after being cooled.
- The engine oil filter base, oil filter, and oil cooler are removed. Hoses are disconnected and bolts removed to access these components.
Caterpillar cat 336 d2 l excavator (prefix tly) service repair manual (tly000...fhjsjkdmemm
1. The document provides instructions for disassembling and assembling the piston pump of a 336D2 excavator.
2. The disassembly process involves removing 27 individual parts in a specific order, taking care with spring-loaded components.
3. Reassembly requires installing the parts in the reverse order, with some components requiring special tools or heating/cooling during installation. Proper end play must be verified during assembly.
Caterpillar cat 336 d2 l excavator (prefix ggh) service repair manual (ggh000...fhjsjkdmemm
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of an excavator model 336D2. The disassembly procedure involves removing 22 parts from the pump housing, including springs, seals, pistons, and bearings. The assembly procedure lists 30 steps to reinstall the parts in reverse order and adjust clearances using various tools. Precautions are provided to prevent injury from spring forces.
Caterpillar cat 336 d2 l excavator (prefix far) service repair manual (far000...fhjsjkdmemm
This document provides instructions for installing a final drive and travel motor on an excavator. It outlines 11 steps, including positioning the travel motor and final drive with lifting devices, installing O-rings and seals, connecting hoses and fittings, and tightening bolts to specified torques. Safety notices are provided to handle fluids properly and keep components clean from contaminants. Required tools include vacuum caps, link brackets, and anti-seize compound.
Caterpillar cat 336 d2 l excavator (prefix elr) service repair manual (elr000...fhjsjkdmemm
This document provides instructions for removing and installing a unit injector hydraulic pump on Caterpillar C9 engines. The removal procedure involves disconnecting tubes, hoses and harnesses from the pump before removing mounting bolts and the pump. For installation, the process is reversed - mounting bolts are installed and all connections reattached. Proper cleaning and use of new O-rings is emphasized to prevent contamination.
Caterpillar cat 336 d2 l excavator (prefix eft) service repair manual (eft000...fhjsjkdmemm
This document provides instructions for disassembling and assembling the travel motor on 336D2 and 336D2 L excavators. The disassembly process involves using various tools to remove components like retaining rings, seals, pistons, springs, and bearings. The assembly process describes installing these components in reverse order and notes that cleanliness is important, components should be lubricated, and parts must be installed in their proper positions and orientations.
Caterpillar cat 336 d2 l excavator (prefix ef3) service repair manual (ef3000...fhjsjkdmemm
The document provides step-by-step instructions to disassemble a travel motor from an excavator model 336D2. It lists 27 steps to remove components from the travel motor including removing the motor head assembly, piston assemblies, barrel assembly, springs, seals and other internal parts. Detailed illustrations accompany each step to show how to remove, disassemble and mark parts for reassembly. Safety precautions are provided to properly release spring forces when disassembling components.
Caterpillar cat 336 d2 l excavator (prefix dgr) service repair manual (dgr000...fhjsjkdmemm
This document provides instructions for removing and installing a unit injector and unit injector sleeve on a Caterpillar C9 engine. It outlines the required tools and safety procedures. The key steps include cleaning parts, installing new seals, using tools to remove and install components, and refilling fluids after installation. Proper installation is important to prevent leaks and engine issues.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
3. Foreword
BOMAG 3
BW 125 ADH/ BW 135AD/138 AD/AC
Foreword
BOMAG machines are products from the wide
range of BOMAG compaction equipment.
BOMAG’s vast experience in connection with
state-of-the-art production and testing meth-
ods, such as lifetime tests of all important
components and highest quality demands
guarantee maximum reliability of your ma-
chine.
This manual comprises:
l Safety regulations
l Operating instructions
l Maintenance instructions
l Trouble shooting
Using these instructions will
l help you to become familiar with the machine.
l avoid malfunctions caused by unprofessional
operation.
Compliance with the maintenance instructions will
l enhance the reliability of the machine on con-
struction sites,
l prolong the lifetime of the machine,
l reduce repair costs and downtimes.
BOMAG will not assume liability for the function of
the machine
l if it is handled in a way that does not comply
with the usual modes of use,
l if it is used for purposes other than the ones it
is intended for, see safety regulations.
No warranty claims can be lodged in case of dam-
age resulting from
l operating errors,
l insufficient maintenance and
l wrong fuels and lubricants.
Please note!
This manual was written for operators and mainte-
nance personnel on construction sites.
Always keep this manual close at hand, e.g. in the
tool compartment of the machine or in a specially
provided container. These operating and mainte-
nance instructions are part of the machine.
You should only operate the machine after you
have been instructed and in compliance with these
instructions.
Strictly observe the safety regulations.
Please observe also the guidelines of the Civil En-
gineering Liability Association ”Safety Rules for
the Operation of Road Rollers and Soil Compac-
tors” and all relevant accident prevention regula-
tions.
For your own personal safety you should only
use original spare parts from BOMAG.
In the course of technical development we re-
serve the right for technical modifications
without prior notification.
These operating and maintenance instructions are
also available in other languages.
Furthermore, the spare parts catalogue is availa-
ble from your BOMAG dealer against the serial
number of your machine.
Your BOMAG dealer will also supply you with in-
formation about the correct use of our machines in
soil and asphalt construction.
The above notes do not constitute an extension of
the warranty and liability conditions specified in the
general terms of business of BOMAG.
We wish you successful work with your BOMAG
machine.
BOMAG GmbH
Printed in Germany
Copyright by BOMAG
4. Foreword
BOMAG
4 BW 125 ADH/ BW 135AD/138 AD/AC
Please fill in
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Machine type (Fig. 1)
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial-number (Fig. 1 and 2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine type (Fig. 3)
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine number (Fig. 3)
i Note
Supplement the above data together with the com-
missioning protocol.
During commissioning our organisation will in-
struct you in the operation and maintenance of the
machine.
Please observe strictly the safety regulations and
all notes on risks and dangers!
Fig. 1
Fig. 2
Fig. 3
5. Table of Contents
BOMAG 5
BW 125 ADH/ BW 135AD/138 AD/AC
Technical Data 7
Safety regulations 15
Indicators and Controls 23
3.1 General notes 27
3.2 Description of indicators and control elements 27
Operation 35
4.1 General notes 36
4.2 Inspections before starting operation 36
4.3 Starting the engine 37
4.4 Starting with jump wires 39
4.5 Driving the machine 39
4.6 Stopping the machine / applying the brake 41
4.7 Switching the vibration on and off 41
4.8 Switching the vibration on or off 43
4.9 Switching the pressure sprinkler system on or off 44
4.10 Stopping the engine/machine 45
4.11 Adjusting the driver's seat 46
4.12 Towing 46
4.13 Loading and transport 48
4.14 Foldable roll over protection structure (ROPS) 49
Maintenance 51
5.1 General notes on maintenance 52
5.2 Fuels and lubricants 53
5.3 Table of fuels and lubricants 55
5.4 Running-in instructions 56
5.5 Maintenance chart 57
5.6 Check the engine oil level 59
5.7 Checking the dry air filter 59
5.8 Checking the hydraulic oil level 60
5.9 Checking the hydraulic oil filter element 60
5.10 Checking the fuel level 61
5.11 Checking the water level 61
5.12 Checking the emulsion oil level 62
5.13 Lubricating the articulated joint 62
5.14 Cleaning cooling fins and engine oil cooler 63
5.15 Cleaning the hydraulic oil cooler 64
5.16 Adjusting the scrapers 64
5.17 Checking the battery condition, greasing the poles 65
5.18 Draining the slurry from the fuel tank 66
5.19 Changing the engine oil 67
5.20 Change the engine oil filter cartridge 68
6. Table of Contents
BOMAG
6 BW 125 ADH/ BW 135AD/138 AD/AC
5.21 Check, adjust the valve clearance 68
5.22 Checking, tensioning, changing the V-belt 70
5.23 Changing the fuel pre-filter 71
5.24 Change the fuel filter cartridge 72
5.25 Changing the hydraulic oil 73
5.26 Changing the hydraulic oil filter element 74
5.27 Checking the injection valves 75
5.28 Replacing the toothed belt 76
5.29 Checking the tire pressure 77
5.30 Cleaning, changing the dry air filter 77
5.31 Cleaning the water tank 78
5.32 Water sprinkler system, maintenance in the event of frost 79
5.33 Engine conservation 79
5.34 Tightening torques for screws with metric unified thread 80
Trouble shooting 81
6.1 General notes 82
6.2 Engine problems 83
8. Technical Data
BOMAG
8 BW 125 ADH/ BW 135AD/138 AD/AC
Fig. 4
Dimensions in
mm
A B C D H H2 K L O S W
BW 125 ADH 1790 1280 650 800 1900 2700 320 2590 40 17,0 1200
BW 135 AD 1790 1380 650 800 1900 2700 320 2590 40 17,0 1300
BW 138 AD 1790 1460 650 810 1905 2705 325 2600 40 22 1380
*
BW 125 ADH BW 135 AD BW 138 AD
Weights
Operating weight (CECE) kg 3360 3560 4200
Mean axle load (CECE) kg 1680 1780 2100
Mean static linear load
(CECE)
kg/cm 14 13,7 15,2
Dimensions
Oscillation angle +/-° 13 13 13
Inner track radius mm 3700 3650 3610
9. Technical Data
BOMAG 9
BW 125 ADH/ BW 135AD/138 AD/AC
Travel characteristics
Travel speed I km/h 0...5,0 0...5,0 0...5,0
Travel speed II km/h 0...10 0...10 0...10
Max. gradability/with vi-
bration (soil dependent)
% 40/30 40/30 40/30
Drive
Engine manufacturer Deutz Deutz Deutz
Type F3L 2011 F3L 2011 F3L 2011
Cooling Air-oil Air-oil Air-oil
Number of cylinders 3 3 3
Rated power ISO 9249 kW 34 34 34
Rated speed rpm 2800 2800 2800
Fixed engine speed 1 rpm 2200 2200 2500
Fixed engine speed 2 rpm 2700 2700 2800
Fuel tank capacity l 55 55 55
Electrical equipment V 12 12 12
Drive system hydrost. hydrost. hydrost.
Driven axles front+rear front+rear front+rear
Brakes
Service brake hydrost. hydrost. hydrost.
Parking brake hydr.-mech. hydr.-mech. hydr.-mech.
Steering
Type of steering Oscill.-articul. Oscill.-articul. Oscill.-articul.
Steering operation hydrost. hydrost. hydrost.
Steering angle +/- Degree 25 25 25
Vibration system
Drive system hydrost. hydrost. hydrost.
Frequency Hz 50/60 50/60 46/52
Amplitude mm 0,45 0,40 0,50
Vibrating drum front+rear front+rear front+rear
Water sprinkler system
Type of sprinkling Pressure Pressure Pressure
Interval control Standard Standard Standard
Water tank capacity l 230 230 230
* The right for technical modifications remains reserved
* BW 125 ADH BW 135 AD BW 138 AD
10. Technical Data
BOMAG
10 BW 125 ADH/ BW 135AD/138 AD/AC
The following noise and vibration values according to the EC-directive for machines, edition (98/37/
EEC) and the noise emission regulation 2000/14/EC were measured at nominal engine speed and with
the vibration switched on. The machine was standing on an elastic base.
During operation these values may vary because of the existing operating conditions.
Noise value
The sound level according to enclosure 1, paragraph 1.7.4. f of the EC-machine regulation is
sound pressure level on the operator’s stand:
BW 125 ADH
LpA =79 dB(A)
BW 135 AD
LpA =83,5 dB(A)
BW 138 AD
LpA =86 dB(A)
The nose emission value for the machine according to the noise emission regulation 2000/14/EG is
guaranteed sound capacity level of the machine:
BW 125 ADH
LWA = 107 dB(A)
BW 135 AD
LWA = 107 dB(A)
BW 138 AD
LWA = 104 dB(A)
These sound values were determined according to ISO 3744 for the sound capacity level (LWA) and ISO
11204 for sound pressure level (LpA) at the place of the operator.
Vibration value
The vibration values according to enclosure 1, paragraph 3. 6. 3. a of the EC-machine regulation are:
Vibration of the entire boy (driver’s seat)
The weighted effective acceleration value determined according to ISO 7096 is <= 0.5 m/sec2
.
Hand-arm vibration values
The weighted effective acceleration value determined according to EN 500/ISO is <= 2.5 m/sec2
.
11. Technical Data
BOMAG 11
BW 125 ADH/ BW 135AD/138 AD/AC
Fig. 5
Dimensions in
mm
A B C D H H2 K L O S W
BW 138 AC 1790 1460 650 810 1905 2705 325 2580 40 22 1380
* BW 138 AC
Weights
Operating weight (CECE) kg 4000
Axle load, drum (CECE) kg 2050
Axle load, wheels (CECE) kg 1950
Mean static linear load kg/cm 14,9
Dimensions
Oscillation angle +/-° 13
Inner track radius mm 3610
12. Technical Data
BOMAG
12 BW 125 ADH/ BW 135AD/138 AD/AC
Travel characteristics
Travel speed I km/h 0...5,0
Travel speed II km/h 0...10
Max. gradability/with vi-
bration (soil dependent)
% 40/30
Drive
Engine manufacturer Deutz
Type F3L 2011
Cooling Air-oil
Number of cylinders 3
Rated power ISO 9249 kW 34
Rated speed rpm 2800
Fixed engine speed 1 rpm 2250
Fixed engine speed 2 rpm 2800
Fuel tank capacity l 55
Electrical equipment V 12
Drive system hydrostatic
Driven axles front+rear
Tires
Number of tires 4
Tire size 225/75 R16
Brakes
Service brake hydrost.
Parking brake hydr.-mech.
Steering
Type of steering Oscill.-articul.
Steering operation hydrost.
Steering angle +/- Degree 25
Vibration system
Drive system hydrost.
Frequency Hz 46/52
Amplitude mm 0,5
Vibrating drum front
Water sprinkler system
Type of sprinkling Pressure
Interval control Standard
Water tank capacity l 230
Emulsion tank capacity l 20
* The right for technical modifications remains reserved
* BW 138 AC
13. Technical Data
BOMAG 13
BW 125 ADH/ BW 135AD/138 AD/AC
The following noise and vibration values according to the EC-directive for machines, edition (98/37/
EEC) and the noise emission regulation 2000/14/EC were measured at nominal engine speed and with
the vibration switched on. The machine was standing on an elastic base.
During operation these values may vary because of the existing operating conditions.
Noise value
The sound level according to enclosure 1, paragraph 1.7.4. f of the EC-machine regulation is
sound pressure level on the operator’s stand:
BW 138 AC
LpA =81 dB(A)
The nose emission value for the machine according to the noise emission regulation 2000/14/EG is
guaranteed sound capacity level of the machine:
BW 138 AC
LWA = 102 dB(A)
These sound values were determined according to ISO 3744 for the sound capacity level (LWA) and ISO
11204 for sound pressure level (LpA) at the place of the operator.
Vibration value
The vibration values according to enclosure 1, paragraph 3. 6. 3. a of the EC-machine regulation are:
Vibration of the entire boy (driver’s seat)
The weighted effective acceleration value determined according to ISO 7096 is <= 0.5 m/sec2
.
Hand-arm vibration values
The weighted effective acceleration value determined according to EN 500/ISO is <= 2.5 m/sec2
.
15. Safety regulations
BOMAG
16 BW 125 ADH/ BW 135AD/138 AD/AC
General Notes
This BOMAG machine has been built in ac-
cordance with the latest technical standard
and complies with the applicable regulations
and technical rules. However, dangers for per-
sons and property may arise from this ma-
chine, if:
l it is used for purposes other than the ones it is
intended for
l it is operated by untrained personnel
l it is changed or converted in an unprofessional
way
l the safety instructions are not observed
Each person involved in the operation, mainte-
nance and repair of the machine must there-
fore read and comply with these safety
regulations. If necessary, this must be con-
firmed by obtaining the signature of the cus-
tomer.
Furthermore, the following instructions and regula-
tions must obviously also be complied with:
l applicable accident prevention instructions
l generally accepted safety and road traffic reg-
ulations
l country specific safety regulations. It is the
duty of the operator to be acquainted with
these instructions and to apply these accord-
ingly. This applies also for local regulations
concerning different types of handling work.
Should the recommendations in these instruc-
tions be different from the regulations valid in
your country, you must comply with the safety
regulations valid in your country.
Intended use
This machine must only be used for:
l compaction of bituminous material, e.g. road
surface layers. (Only AC and AD machines)
l medium to heavy compaction work in earth
construction (road sub-bases)
l You should only operate the unit with fully
functional safety equipment.
l Have the machine inspected by an expert
once every year.
Unintended use
However, dangers may arise from this machine if
it is operated by untrained personnel or if it is sub-
ject of unintended use.
Do not work with vibration on hard concrete, cured
bitumen layers or extremely frozen ground.
Starting and operation of the machine in explosive
environments is prohibited.
Who has permission to operate the ma-
chine?
Only trained and instructed persons of at least 18
years of age are permitted to drive and operate
this machine. For operation of the machine the re-
sponsibilities must be clearly specified and com-
plied with.
Persons under the influence of alcohol, medicine
or drugs are not allowed to operate, service or re-
pair the machine.
Maintenance and repair work requires specific
knowledge and must therefore only be performed
by trained specialists.
Conversions and changes to the ma-
chine
Unauthorized alterations to the machine are pro-
hibited for safety reasons.
Original parts and accessories have been special-
ly designed for this machine. We wish to make ex-
plicitly clear that we have not tested or approved
any parts or accessories not supplied by us. The
installation and/or use of such products may have
an adverse effect on the active and/or passive
driving safety. The manufacturer explicitly ex-
cludes any liability for damage caused by the use
of non-original parts or accessories.
Notes on safety in the operating and
maintenance instructions:
! Danger
Paragraphs marked like this highlight possible
dangers for persons.
! Caution
Paragraphs marked like this highlight possible
dangers for machines or parts of the machine.
16. Safety regulations
BOMAG 17
BW 125 ADH/ BW 135AD/138 AD/AC
i Note
Paragraphs marked like this contain technical in-
formation for the optimal economical use of the
machine.
Environment
Paragraphs marked like this point out practic-
es for safe and environmental disposal of fuels
and lubricants as well as replacement parts.
Observe environmental regulations.
Information and safety stickers/decals
on the machine
Keep safety stickers in good and legible condition
(see parts manual) and comply with their meaning.
Replace damaged and illegible stickers/decals.
Loading the machine
Use only strong and stable loading ramps of suffi-
cient load bearing capacity. The ramp inclination
must be less than the gradability of the machine.
Secure the machine against tipping or slipping off.
Secure the machine on the transport vehicle
against rolling, slipping and turning over.
Persons are highly endangered when
l they step or stand under loads being lifted
l they remain in the drive range of the machine
during an instruction and during loading.
The machine must not swing about when being lift-
ed.
Use only safe lifting gear of sufficient load bearing
capacity.
Fasten the lifting gear only at the specified lifting
points.
Towing the machine
You should generally use a tow bar.
Max. towing speed 1 km/h, max. towing distance
500 m.
Before releasing the multi-disc brake secure the
machine against unintended rolling.
Checking the roll over protection
structure (ROPS)
The frame of the machine must not be warped,
bent or cracked in the area of the ROPS fastening.
The ROPS must not show any rust, damage, hair-
line cracks or open fractures.
The ROPS must not rattle about when driving.
This would indicate that it is not properly fastened.
All bolted connections must comply with the spec-
ifications and should be absolutely tight (observe
the tightening torques). Screw and nuts must not
be damaged, bent or deformed.
No accessories may be welded or bolted on and
no additional holes must be drilled without the con-
sent of the distributor, since this will impair the
strength of the unit.
Starting the machine
Before starting
The machine must only be operated from the driv-
er's seat.
Use only machines which are serviced at regular
intervals.
Become acquainted with the equipment, the con-
trol elements, the working principle of the machine
and the working area.
Wear your personal protective outfit (hard hat,
safety boots, etc.).
Before climbing on the machine check whether:
l persons or obstructions are beside or under
the machine
l the machine is free of oily and combustible
material
l all grips, steps and platforms are free of
grease, oils, fuel, dirt, snow and ice
l the engine hood is closed and locked
Use steps and grips to climb onto the machine.
Before starting the machine check whether:
l the machine shows any obvious faults
l all guards and safety elements are in place
l steering, brakes, control elements, light sys-
tem and warning horn work correctly
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. Safety regulations
BOMAG
18 BW 125 ADH/ BW 135AD/138 AD/AC
l the seat is correctly adjusted
l mirrors (if present) are clean and correctly ad-
justed.
Do not start the machine with defective gauges,
control lights or control elements.
Do not take any loose objects with you or fasten
them to the machine.
On machines with roll over protection system you
must always wear your seat belt.
Starting
Start and operate the machine only from the driv-
er's seat.
For starting set all control levers to 'neutral posi-
tion'.
Do not use any starting aids like start pilot or ether.
After starting check all gauges and control lights.
Starting with jump wires
Connect plus with plus and minus with minus
(ground cable) - always connect the ground strap
last and disconnect it first! A wrong connection will
cause severe damage in the electric system.
Do not start the engine by shorting the electric ter-
minals on the starter motor, because the machine
may start to drive immediately.
Starting in closed rooms
Exhaust gases are highly dangerous! Always en-
sure an adequate supply of fresh air when starting
in closed rooms!
Driving the machine
Persons in the danger area
Before taking up work, also after breaks, you
should always convince yourself that the danger
zone is free of persons or obstructions, especially
when driving in reverse.
If necessary give warning signals. Stop work im-
mediately if persons remain in the danger zone,
despite the warning.
Do not step or stand in the articulation area of the
machine when the engine is running. Danger of
squashing!
Driving
In events of emergency and in case of danger ac-
tuate the emergency stop switch immediately. Do
not use the emergency stop switch as service
brake.
Restart the machine only after the danger that
caused the actuation of the emergency stop switch
has been eliminated.
If the engine oil pressure control light lights up stop
the engine immediately.
If the machine has contacted high-voltage power
lines:
l Do not leave the operator's platform
l Warn others from coming close to or touching
the machine
l if possible drive the machine out of the danger
zone
l Have the electric power switched off
Operate the machine only from the operator's
stand.
Keep the cabin doors closed.
Do not adjust the driver's seat while driving.
Do not climb onto or off the machine while the ma-
chine is driving.
Change the travel direction only at standstill.
Do not use the machine to transport persons.
In case of unusual noises and development of
smoke perform trouble shooting and have the fault
corrected.
Always keep a sufficient distance to excavation
walls and embankments and do not use working
methods that could impair the stability of the ma-
chine.
Do not work with vibration on hard concrete, cured
bitumen layers or extremely frozen ground.
Always keep a sufficient distance when passing
through subways, under bridges, tunnels, electric
power lines etc.
Driving on inclinations and slopes
Do not drive on gradients exceeding the maximum
gradability of the machine.
On slopes drive extremely carefully and always di-
rectly up or down the slope. Change to a lower
gear before starting to drive.
Wet and loose soils considerably reduce the
ground adhesion of the machine on inclinations
and slopes. Higher risk of accident!
19. Safety regulations
BOMAG 19
BW 125 ADH/ BW 135AD/138 AD/AC
Behaviour in traffic
Match the speeds to the working conditions.
Always allow loaded transport vehicles to pass.
Switch the lights on if the visibility is poor.
Keep away from edges and embankments.
Check the effect of vibration
When compacting with vibration you must always
check the effect of the vibration on nearby build-
ings and underground supply lines (gas, water,
sewage, electric power) and stop compaction work
with vibration, if necessary.
Do not switch the vibration on when working on
hard (frozen, concrete) ground. Danger of bearing
damage!
Parking the machine
Park the machine on level and firm ground.
Before leaving the machine:
l return the control lever to neutral position
l apply the parking brake
l shut the engine down and pull the ignition key
out
l lock the cabin door
l secure the machine against unintended use.
Do not jump off the machine, but use access steps
and grips.
Mark machines, which could be in the way, with a
clearly visible sign.
Parking on slopes and inclinations
Secure the machine against rolling, place metal
chocks in front of and behind the drums.
Filling the fuel tank
Do not inhale any fuel fumes.
Refuel only with the engine stopped and the auxil-
iary heater switched off.
Do not refuel in closed rooms.
No open fire, do not smoke.
Do not spill any fuel. Catch running out fuel, do not
let it seep into the ground.
Wipe off spilled fuel. Keep dirt and water away
from the fuel.
Leaking fuel tanks can cause explosions. Ensure
tight fit of the fuel tank cover, if necessary replace
immediately.
Fire protection measures
Familiarise yourself with the location and the oper-
ation of fire fighting equipment. Observe all fire re-
porting and fire fighting possibilities.
Maintenance work
Comply with the maintenance work described in
the operating and maintenance instructions, in-
cluding the information concerning the replace-
ment of parts.
Maintenance work must only be performed by
qualified and authorized persons.
For overhead maintenance and assembly work
use the access steps and working platforms pro-
vided or other secure means. Do not use machine
parts as access steps.
Keep unauthorized persons away from the ma-
chine.
Do not perform maintenance work while the ma-
chine is driving or the engine is running.
Park the machine on horizontal, level and firm
ground.
Pull the key out of the ignition switch.
Secure the articulated joint with the articulation
lock.
Working on hydraulic lines
Relieve hydraulic pressures before working on hy-
draulic lines. Hydraulic oil escaping under pres-
sure can penetrate the skin and cause severe
injury. When being injured by hydraulic oil consult
a medical doctor immediately, as otherwise this
may cause severe infections.
Do not step in front of or behind the drums/rubber
wheels when performing adjustment work in the
hydraulic system.
Do not change the setting of pressure relief valves.
Drain hydraulic oil at operating temperature - dan-
ger of scalding!
Catch running out hydraulic oil and dispose of en-
vironmentally.
Always catch and dispose of biodegradable hy-
draulic oils separately.