The document outlines a case study on integrating a BACnet IP stack into a building automation controller for effective control of HVAC, AV, and lighting systems. A leading client in advanced home and building automation required this integration to enable native BACnet support, which was successfully implemented through Softdel's solution. The integration resulted in seamless compatibility with existing systems and reduced BOM costs.

1. © Copyright – SoftDEL All Rights Reserved.
BACnet IP in Controller for Integrated
Building Management System
Expertise
used
Case Study Area of engagement
Integration of BACnet IP Stack into a Building Automation Controller to
control HVAC, AV and lighting.
Client
A world leader in the advanced home, campus and building control
automation solution industry.
Requirements
The client provides control system solutions for multimedia and home
automation. The controller could control BACnet-enabled HVAC and other
systems through a third-party gateway device.
The requirement was to integrate the BACnet stack with the firmware of
the controller to provide native BACnet support.
The SoftDEL Solution
• Integrated BACnet IP protocol stack within the controller firmware
through the client proprietary software framework.
• Provided support for site deployment.
Benefits
• Seamless integration with existing building management systems.
• Reduction in BOM cost because of native support.
Testing &
Compliance
Advanced
Communications
Protocols
Building Automation Controller Lighting Controller UI
Embedded
System
Protocol
Training
Protocol
Consultancy