Automotive Rotary Engine Hp Kmpl Mp Ge
•Download as DOCX, PDF•
0 likes•92 views
The document provides specifications for 3 rotary engines with different displacements. The 120hp engine uses 3.92 liters of fuel per hour for every 1000 rpm and has a fuel efficiency of 30 kmpl and 36 mpg. The 200hp engine uses 6 liters of fuel per hour for every 1000 rpm and has a fuel efficiency of 35 kmpl and 85 mpg. The 300hp engine uses 10.25 liters of fuel per hour for every 1000 rpm and has a fuel efficiency of 25 kmpl and 34 mpg. The document was authored by a 45-year automotive expert.
Report
Share
Report
Share
Recommended
Andy Rotary Engine Nor Asp
The document describes Andy Rotary engine specifications for engines of various sizes from 10 cm to 600 cm in diameter. It lists the cylinder diameter, thickness, volume, horsepower output, required fuel per hour, estimated carbon emission reductions per year, and cost for each engine size. The rotary engine works on all fuel types including solids, liquids, gases, and biofuels. It claims to be more efficient than other engine types, requiring only 1/3 the fuel per horsepower and producing 2/3 less carbon emissions.
Andy Rotary Engine Nor Asp
The document contains information about Andy Rotary engines of various sizes ranging from 10cm to 600cm in diameter. It lists the key specifications of each engine such as diameter, thickness, volume, horsepower output, expected fuel consumption per hour, carbon emission reductions per year, and manufacturing cost. The engines can run on all types of fuels such as solids, liquids, gases and biofuels. They are described as having no boiler or turbine and requiring only 1/3 the fuel per horsepower compared to other engines.
Quasi turbine engine
The document describes the Quasi Turbine engine, a proposed pistonless rotary engine. It has a rhomboidal rotor with hinged sides that allow for increased compression and expansion ratios compared to the Wankel engine. The Quasi Turbine has fewer parts than pistons engines, is more efficient, produces high torque at low RPM, and has potential applications in aviation, power tools, vehicles and pumps due to its compact size, lack of vibration, and mechanical simplicity. The engine works through intake, compression, combustion and exhaust cycles without the use of pistons or crankshafts.
Wankel engine
The Wankel engine uses an eccentric rotary design instead of pistons, where the four-stroke cycle occurs inside an oval housing and triangle-shaped rotor. It functions as a variable-volume progressing-cavity system with three cavities repeating the cycle. Wankel engines are lighter, simpler, and have fewer moving parts than equivalent piston engines. They provide high reliability, smooth power delivery, and a high power-to-weight ratio, but consume more fuel and produce more unburnt hydrocarbons than four-stroke engines. Wankel engines are used in cars, motorcycles, and aircraft for their light weight, small size, and durability in all weather. Mazda has designed some of the best Wankel
Six stroke-engine-presenation
This document describes a six-stroke engine designed by Malcolm Beare that combines aspects of two-stroke and four-stroke engines. It works by using a piston in the cylinder head that intakes and exhausts like a two-stroke while the bottom remains a conventional four-stroke. This hybrid design increases torque by 35% and efficiency, while reducing weight and parts compared to a four-stroke. It provides thermodynamic advantages such as greater expansion and slower piston acceleration. The six-stroke engine could replace conventional heads on existing engines.
Quasi-turbine- The very efficient rotary engine in Mechanical field.
The document presents the quasi-turbine (QURBINE) as the next generation rotary engine. It summarizes that piston engines are inefficient due to intermittent combustion and many reciprocating parts. The Wankel rotary engine also has issues with sealing and emissions. The QURBINE uses a four-sided rotor in an oval housing to achieve continuous combustion via photo-detonation, resulting in higher power, zero vibration, less noise and pollution compared to piston and Wankel engines. While construction of the rotor presents challenges, the QURBINE has applications in aircraft, power tools, and vehicles due to its efficiency.
Andy Motors Fwd Profit
Andy Motors has developed a new Forward Wheel Drive (FWD) technology that can increase vehicle speed by 225% and fuel efficiency by 750% for the same ton-horsepower compared to current vehicles. The technology reduces CO2 emissions by 86.67% on average across bikes, cars, and trucks. Financial projections show the FWD technology investment of $4.6 billion would generate $22.05 billion in profits over 479%.
Andy, Muthkal Car 0.6 T Nano
The document summarizes the performance of various automotive designs from Andy and Muthkal. It shows that the AEB and MEB designs using their engine, bearing, and jet technologies can double the speed for the same horsepower as a normal design while reducing fuel consumption by 1/3 and CO2 emissions by 16.7-20%. The designs are also more cost effective and could generate a profit of $150 million over 3 years with an initial investment of $100 million.
Recommended
Andy Rotary Engine Nor Asp
The document describes Andy Rotary engine specifications for engines of various sizes from 10 cm to 600 cm in diameter. It lists the cylinder diameter, thickness, volume, horsepower output, required fuel per hour, estimated carbon emission reductions per year, and cost for each engine size. The rotary engine works on all fuel types including solids, liquids, gases, and biofuels. It claims to be more efficient than other engine types, requiring only 1/3 the fuel per horsepower and producing 2/3 less carbon emissions.
Andy Rotary Engine Nor Asp
The document contains information about Andy Rotary engines of various sizes ranging from 10cm to 600cm in diameter. It lists the key specifications of each engine such as diameter, thickness, volume, horsepower output, expected fuel consumption per hour, carbon emission reductions per year, and manufacturing cost. The engines can run on all types of fuels such as solids, liquids, gases and biofuels. They are described as having no boiler or turbine and requiring only 1/3 the fuel per horsepower compared to other engines.
Quasi turbine engine
The document describes the Quasi Turbine engine, a proposed pistonless rotary engine. It has a rhomboidal rotor with hinged sides that allow for increased compression and expansion ratios compared to the Wankel engine. The Quasi Turbine has fewer parts than pistons engines, is more efficient, produces high torque at low RPM, and has potential applications in aviation, power tools, vehicles and pumps due to its compact size, lack of vibration, and mechanical simplicity. The engine works through intake, compression, combustion and exhaust cycles without the use of pistons or crankshafts.
Wankel engine
The Wankel engine uses an eccentric rotary design instead of pistons, where the four-stroke cycle occurs inside an oval housing and triangle-shaped rotor. It functions as a variable-volume progressing-cavity system with three cavities repeating the cycle. Wankel engines are lighter, simpler, and have fewer moving parts than equivalent piston engines. They provide high reliability, smooth power delivery, and a high power-to-weight ratio, but consume more fuel and produce more unburnt hydrocarbons than four-stroke engines. Wankel engines are used in cars, motorcycles, and aircraft for their light weight, small size, and durability in all weather. Mazda has designed some of the best Wankel
Six stroke-engine-presenation
This document describes a six-stroke engine designed by Malcolm Beare that combines aspects of two-stroke and four-stroke engines. It works by using a piston in the cylinder head that intakes and exhausts like a two-stroke while the bottom remains a conventional four-stroke. This hybrid design increases torque by 35% and efficiency, while reducing weight and parts compared to a four-stroke. It provides thermodynamic advantages such as greater expansion and slower piston acceleration. The six-stroke engine could replace conventional heads on existing engines.
Quasi-turbine- The very efficient rotary engine in Mechanical field.
The document presents the quasi-turbine (QURBINE) as the next generation rotary engine. It summarizes that piston engines are inefficient due to intermittent combustion and many reciprocating parts. The Wankel rotary engine also has issues with sealing and emissions. The QURBINE uses a four-sided rotor in an oval housing to achieve continuous combustion via photo-detonation, resulting in higher power, zero vibration, less noise and pollution compared to piston and Wankel engines. While construction of the rotor presents challenges, the QURBINE has applications in aircraft, power tools, and vehicles due to its efficiency.
Andy Motors Fwd Profit
Andy Motors has developed a new Forward Wheel Drive (FWD) technology that can increase vehicle speed by 225% and fuel efficiency by 750% for the same ton-horsepower compared to current vehicles. The technology reduces CO2 emissions by 86.67% on average across bikes, cars, and trucks. Financial projections show the FWD technology investment of $4.6 billion would generate $22.05 billion in profits over 479%.
Andy, Muthkal Car 0.6 T Nano
The document summarizes the performance of various automotive designs from Andy and Muthkal. It shows that the AEB and MEB designs using their engine, bearing, and jet technologies can double the speed for the same horsepower as a normal design while reducing fuel consumption by 1/3 and CO2 emissions by 16.7-20%. The designs are also more cost effective and could generate a profit of $150 million over 3 years with an initial investment of $100 million.
Automotive Andy, Muthkal Tech
This document describes new engine and bearing technologies from Andy and Muthkal that significantly increase fuel efficiency and horsepower. The Andy engine can provide 300% more horsepower using the same amount of fuel as a normal engine. The Muthkal engine provides 250% more horsepower with the same fuel. Andy bearings allow for double the speed at the same horsepower by reducing rolling friction. Tables show how applying these technologies to bikes, cars and trucks can yield dramatic increases in speed and fuel efficiency while reducing emissions and costs of operation.
Andy Motors Pr0 Fit
Andy Motors has developed new technology for bikes, cars, and trucks that can double speeds and increase fuel efficiency six times compared to normal vehicles, while reducing CO2 emissions by 16.5%. The technology allows bikes to reach 120 kmph getting 360 kmpl, cars to reach 200 kmph getting 60 kmpl, and trucks to reach 200 kmph getting 30 kmpl. The founder, M Andy Appan, is a 45-year expert seeking an investment of 4.2 billion dollars that is projected to return profits of 17.64 billion dollars over 420%.
Muthkal Motors Profit
Muthkal Motors is developing new engine and bearing technologies that can double vehicle speed and increase fuel efficiency 5 times while reducing CO2 emissions by 20% for the same ton-horsepower. Their new designs could cut public transportation travel times in half and lower fares by 50%. The company projects over 400% return on a 3.95 billion dollar investment with profits of 15.87 billion dollars annually from bike, car and truck production. The designer, M Andy Appan, has 45 years of experience and invites contact for more information.
Andy Transport Technology
Andy Transport Technology proposes an engine and bearing system that can power automotive, rail, ship and missile transportation more efficiently than traditional combustion engines. The Andy Engine claims to reduce fuel consumption by 33% and carbon emissions by 33% compared to standard engines by eliminating the need for boilers and turbines. Test results show the Andy Engine can achieve up to triple the speed and 9 times the fuel efficiency of standard engines for the same horsepower output in rail and ship applications, reducing carbon emissions by up to 11.11%. The document provides performance specifications for various vehicle types powered by the Andy Engine.
Ferry 1000 T 330 Knots 6 Mn$ Roi 1600%
The document summarizes an investment opportunity in Andy Technology which develops technology to double ferry speed while using 1/3 the fuel. Over a 6 year period:
- The technology allows ferries to transport 1000 tons at 330 knots for $1 per 50 km, generating $96 million annually.
- Investing $6 million in year 1 yields a 1600% return on investment and $7.25 billion net profit by year 6 as the technology is adopted by growing numbers of ferries.
Automotive bike 360 kmpl
The document describes an innovative automotive bike that achieves 360 kilometers per liter of fuel (kmpl) through the use of Andy Engine and Andy Bearing technologies. The bike can travel 120 kilometers per hour with an engine size of 30cc that uses only 1/3 liter of fuel per hour, resulting in a fuel efficiency of 360 kmpl. The bike's cost is estimated to be $1000 and it emits 775 grams of carbon dioxide per hour. The inventor is named M Andy Appan, who is a 45-year-old mechanical engineering expert.
Andy technology automotive
ANDY technology involves an engine and bearing that can develop the same power as a conventional engine while burning only 1/3 as much fuel. The engine is also able to burn fuels directly without preprocessing. Vehicles installed with ANDY technology can achieve double the speed of conventional vehicles using only 1/3 the normal fuel consumption, resulting in 33% lower CO2e emissions. This technology is suited for automotive, rail, ship and missile applications by reducing rolling friction and drag.
Automotive car 60 kmpl
The document describes an automotive car that achieves 60 kilometers per liter (kmpl) of fuel efficiency. It is developed by Andy Transport Technology and uses Andy Engine and Andy Bearing components. The car can reach 200 kph with an engine of 600cc that uses only 10/3 or 3.33 liters of fuel per hour, resulting in a fuel efficiency of 60 kmpl. It costs $15,000 and emits 7750 grams of carbon dioxide per hour. It was created by M Andy Appan, a mechanical engineer with 45 years of experience.
Automotive bike 360 kmpl
The document describes an innovative automotive bike that achieves 360 kilometers per liter of fuel (kmpl) through the use of Andy Engine and Andy Bearing technologies. The bike can travel 120 kilometers per hour with an engine size of 30cc that uses only 1/3 liter of fuel per hour, resulting in a fuel efficiency of 360 kmpl. The bike's cost is estimated to be $1000 and it emits 775 grams of carbon dioxide per hour. The inventor is named M Andy Appan, who is a 45-year-old mechanical engineering expert.
Andy technology automotive
ANDY technology involves an engine and bearing that can develop the same power as a conventional engine while burning only 1/3 as much fuel. The engine is also able to burn fuels directly without preprocessing. Vehicles installed with ANDY technology can achieve double the speed of conventional vehicles using only 1/3 the normal fuel consumption, resulting in 33% lower CO2e emissions. This technology is suited for automotive, rail, ship and missile applications by reducing rolling friction and drag.
Automotive truck 30 kmpl
The document describes an automotive truck that achieves 30 kilometers per liter (kmpl) of fuel efficiency. The truck is powered by an Andy Engine and uses Andy Bearing components. It can travel at 200 kph while carrying a 15 ton payload with an engine that is only 1600cc and 240 horsepower, using only 20/3 or 6.67 liters of fuel per hour. This translates to a fuel efficiency of 30 kmpl. The estimated cost of the truck is $50,000 and it emits only 15.5 kg of carbon dioxide per hour.
Private equity fund 15 mn$ rp 30 mn$ in 2 yrs
This document proposes three private equity funds totalling $315 million to invest in cargo ships, ferries, and oil tankers. The first fund of $15 million would build 3 ships of 1,000 gross tons each, capable of carrying 1,000 tons of cargo daily, to yield a 1920% return over 2 years. The second $150 million fund would build 5 larger ships, earning a 3200% return over 3 years. The third $150 million fund would build a single very large crude carrier tanker that could transport 30 million tons of oil per year, earning a 3200% return.
Truck Transport Operation
The document summarizes transportation operations and costs for trucking routes in India. It analyzes income from routes from Chennai to Trichy, Madurai, and Cumbum based on distance, number of trips per day, speed, and fare per km. It then estimates that doubling speeds could double income to 36 lacs per year. It also evaluates costs and profits for operating rapid bus transport with trucks that have different engine and bearing configurations.
Truck Running Profit Ro I 176 %
The document summarizes the profitability analysis of operating a fleet of 10 trucks. It finds that the return on investment is 176% with annual net profits of $1.76 million. By switching to a more fuel efficient engine, fuel costs could be reduced by $0.72 million annually, increasing total annual profits to $2.9 million while paying back the engine upgrade costs within 20 days.
Transport Tech 23 Bn$
The document discusses transportation technologies across automotive, rail, ship, and jet industries. A new engine and bearing technology can provide the same horsepower using 1/3 less fuel, reduce CO2 emissions by 1/3, and cut costs by 2/3. The technology promises to double speed for trains and ships through low rolling friction, and increase fuel efficiency in cars to 6 kilometers per liter while boosting revenue 200%, reducing expenses 50%, and growing profit 150% for associated businesses. The inventor has 45 years of experience and investments worth $23 billion could return $180 billion, cutting carbon emissions by 333 million tons per year.
Transport Innovations
This document outlines transport innovations that can double speed while using 1/3 the fuel per ton-horsepower for automotive, rail, ship, and ferry vehicles including very large crude carriers. The innovations require an initial $660 billion investment and could generate $5400 billion in annual profit, reduce carbon emissions by 10 billion tons per year, earn $15 billion in daily profit, and provide $30 billion annually in royalties.
Transport Profit Run
Andy Technology has developed a rotary engine called the Andy Engine that requires 1/3 the volume, fuel, and carbon emissions compared to normal engines to produce the same horsepower. The Andy Engine and Andy Bearing technology allow vehicles to operate at double the speed for the same horsepower-tonnage ratio, using only 1/3 the fuel. This can result in up to 6 times the fuel efficiency (kmpl), 1/3 the carbon emissions, and 2/3 lower operating costs per ton-km compared to normal engines. The Andy Rotary Engine comes in various sizes from 30cm to 650cm in diameter and can produce power outputs from 175HP to 1.8 million HP while using only a fraction of
Transport Innovations
This document outlines transportation innovations that could double speeds and reduce fuel usage by 1/3 compared to current technologies across various modes of transport including automotive, rail, ship, and ferry. The innovations have the potential to generate $5400 billion per year in profits, reduce carbon emissions by 10 billion tons per year, and earn $30 billion per year in royalties. Cost estimates are provided for implementing the innovations across different vehicle types from bikes to very large crude carriers.
Transport Double Speed, 33 % Fuel For Same Ton Hp
Andy Technology has developed the Andy Engine and Andy Bearing to improve transport efficiency. The Andy Engine can provide the same horsepower as conventional engines but uses only 1/3 the fuel. This improves the fuel efficiency, reducing costs and carbon emissions for vehicles used in transport, including automotive, rail, and shipping applications. A formula is given to calculate transport efficiency in ton-kilometers per liter based on factors like vehicle weight, speed, horsepower, and fuel volume.
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
More Related Content
More from andy appan
Automotive Andy, Muthkal Tech
This document describes new engine and bearing technologies from Andy and Muthkal that significantly increase fuel efficiency and horsepower. The Andy engine can provide 300% more horsepower using the same amount of fuel as a normal engine. The Muthkal engine provides 250% more horsepower with the same fuel. Andy bearings allow for double the speed at the same horsepower by reducing rolling friction. Tables show how applying these technologies to bikes, cars and trucks can yield dramatic increases in speed and fuel efficiency while reducing emissions and costs of operation.
Andy Motors Pr0 Fit
Andy Motors has developed new technology for bikes, cars, and trucks that can double speeds and increase fuel efficiency six times compared to normal vehicles, while reducing CO2 emissions by 16.5%. The technology allows bikes to reach 120 kmph getting 360 kmpl, cars to reach 200 kmph getting 60 kmpl, and trucks to reach 200 kmph getting 30 kmpl. The founder, M Andy Appan, is a 45-year expert seeking an investment of 4.2 billion dollars that is projected to return profits of 17.64 billion dollars over 420%.
Muthkal Motors Profit
Muthkal Motors is developing new engine and bearing technologies that can double vehicle speed and increase fuel efficiency 5 times while reducing CO2 emissions by 20% for the same ton-horsepower. Their new designs could cut public transportation travel times in half and lower fares by 50%. The company projects over 400% return on a 3.95 billion dollar investment with profits of 15.87 billion dollars annually from bike, car and truck production. The designer, M Andy Appan, has 45 years of experience and invites contact for more information.
Andy Transport Technology
Andy Transport Technology proposes an engine and bearing system that can power automotive, rail, ship and missile transportation more efficiently than traditional combustion engines. The Andy Engine claims to reduce fuel consumption by 33% and carbon emissions by 33% compared to standard engines by eliminating the need for boilers and turbines. Test results show the Andy Engine can achieve up to triple the speed and 9 times the fuel efficiency of standard engines for the same horsepower output in rail and ship applications, reducing carbon emissions by up to 11.11%. The document provides performance specifications for various vehicle types powered by the Andy Engine.
Ferry 1000 T 330 Knots 6 Mn$ Roi 1600%
The document summarizes an investment opportunity in Andy Technology which develops technology to double ferry speed while using 1/3 the fuel. Over a 6 year period:
- The technology allows ferries to transport 1000 tons at 330 knots for $1 per 50 km, generating $96 million annually.
- Investing $6 million in year 1 yields a 1600% return on investment and $7.25 billion net profit by year 6 as the technology is adopted by growing numbers of ferries.
Automotive bike 360 kmpl
The document describes an innovative automotive bike that achieves 360 kilometers per liter of fuel (kmpl) through the use of Andy Engine and Andy Bearing technologies. The bike can travel 120 kilometers per hour with an engine size of 30cc that uses only 1/3 liter of fuel per hour, resulting in a fuel efficiency of 360 kmpl. The bike's cost is estimated to be $1000 and it emits 775 grams of carbon dioxide per hour. The inventor is named M Andy Appan, who is a 45-year-old mechanical engineering expert.
Andy technology automotive
ANDY technology involves an engine and bearing that can develop the same power as a conventional engine while burning only 1/3 as much fuel. The engine is also able to burn fuels directly without preprocessing. Vehicles installed with ANDY technology can achieve double the speed of conventional vehicles using only 1/3 the normal fuel consumption, resulting in 33% lower CO2e emissions. This technology is suited for automotive, rail, ship and missile applications by reducing rolling friction and drag.
Automotive car 60 kmpl
The document describes an automotive car that achieves 60 kilometers per liter (kmpl) of fuel efficiency. It is developed by Andy Transport Technology and uses Andy Engine and Andy Bearing components. The car can reach 200 kph with an engine of 600cc that uses only 10/3 or 3.33 liters of fuel per hour, resulting in a fuel efficiency of 60 kmpl. It costs $15,000 and emits 7750 grams of carbon dioxide per hour. It was created by M Andy Appan, a mechanical engineer with 45 years of experience.
Automotive bike 360 kmpl
The document describes an innovative automotive bike that achieves 360 kilometers per liter of fuel (kmpl) through the use of Andy Engine and Andy Bearing technologies. The bike can travel 120 kilometers per hour with an engine size of 30cc that uses only 1/3 liter of fuel per hour, resulting in a fuel efficiency of 360 kmpl. The bike's cost is estimated to be $1000 and it emits 775 grams of carbon dioxide per hour. The inventor is named M Andy Appan, who is a 45-year-old mechanical engineering expert.
Andy technology automotive
ANDY technology involves an engine and bearing that can develop the same power as a conventional engine while burning only 1/3 as much fuel. The engine is also able to burn fuels directly without preprocessing. Vehicles installed with ANDY technology can achieve double the speed of conventional vehicles using only 1/3 the normal fuel consumption, resulting in 33% lower CO2e emissions. This technology is suited for automotive, rail, ship and missile applications by reducing rolling friction and drag.
Automotive truck 30 kmpl
The document describes an automotive truck that achieves 30 kilometers per liter (kmpl) of fuel efficiency. The truck is powered by an Andy Engine and uses Andy Bearing components. It can travel at 200 kph while carrying a 15 ton payload with an engine that is only 1600cc and 240 horsepower, using only 20/3 or 6.67 liters of fuel per hour. This translates to a fuel efficiency of 30 kmpl. The estimated cost of the truck is $50,000 and it emits only 15.5 kg of carbon dioxide per hour.
Private equity fund 15 mn$ rp 30 mn$ in 2 yrs
This document proposes three private equity funds totalling $315 million to invest in cargo ships, ferries, and oil tankers. The first fund of $15 million would build 3 ships of 1,000 gross tons each, capable of carrying 1,000 tons of cargo daily, to yield a 1920% return over 2 years. The second $150 million fund would build 5 larger ships, earning a 3200% return over 3 years. The third $150 million fund would build a single very large crude carrier tanker that could transport 30 million tons of oil per year, earning a 3200% return.
Truck Transport Operation
The document summarizes transportation operations and costs for trucking routes in India. It analyzes income from routes from Chennai to Trichy, Madurai, and Cumbum based on distance, number of trips per day, speed, and fare per km. It then estimates that doubling speeds could double income to 36 lacs per year. It also evaluates costs and profits for operating rapid bus transport with trucks that have different engine and bearing configurations.
Truck Running Profit Ro I 176 %
The document summarizes the profitability analysis of operating a fleet of 10 trucks. It finds that the return on investment is 176% with annual net profits of $1.76 million. By switching to a more fuel efficient engine, fuel costs could be reduced by $0.72 million annually, increasing total annual profits to $2.9 million while paying back the engine upgrade costs within 20 days.
Transport Tech 23 Bn$
The document discusses transportation technologies across automotive, rail, ship, and jet industries. A new engine and bearing technology can provide the same horsepower using 1/3 less fuel, reduce CO2 emissions by 1/3, and cut costs by 2/3. The technology promises to double speed for trains and ships through low rolling friction, and increase fuel efficiency in cars to 6 kilometers per liter while boosting revenue 200%, reducing expenses 50%, and growing profit 150% for associated businesses. The inventor has 45 years of experience and investments worth $23 billion could return $180 billion, cutting carbon emissions by 333 million tons per year.
Transport Innovations
This document outlines transport innovations that can double speed while using 1/3 the fuel per ton-horsepower for automotive, rail, ship, and ferry vehicles including very large crude carriers. The innovations require an initial $660 billion investment and could generate $5400 billion in annual profit, reduce carbon emissions by 10 billion tons per year, earn $15 billion in daily profit, and provide $30 billion annually in royalties.
Transport Profit Run
Andy Technology has developed a rotary engine called the Andy Engine that requires 1/3 the volume, fuel, and carbon emissions compared to normal engines to produce the same horsepower. The Andy Engine and Andy Bearing technology allow vehicles to operate at double the speed for the same horsepower-tonnage ratio, using only 1/3 the fuel. This can result in up to 6 times the fuel efficiency (kmpl), 1/3 the carbon emissions, and 2/3 lower operating costs per ton-km compared to normal engines. The Andy Rotary Engine comes in various sizes from 30cm to 650cm in diameter and can produce power outputs from 175HP to 1.8 million HP while using only a fraction of
Transport Innovations
This document outlines transportation innovations that could double speeds and reduce fuel usage by 1/3 compared to current technologies across various modes of transport including automotive, rail, ship, and ferry. The innovations have the potential to generate $5400 billion per year in profits, reduce carbon emissions by 10 billion tons per year, and earn $30 billion per year in royalties. Cost estimates are provided for implementing the innovations across different vehicle types from bikes to very large crude carriers.
Transport Double Speed, 33 % Fuel For Same Ton Hp
Andy Technology has developed the Andy Engine and Andy Bearing to improve transport efficiency. The Andy Engine can provide the same horsepower as conventional engines but uses only 1/3 the fuel. This improves the fuel efficiency, reducing costs and carbon emissions for vehicles used in transport, including automotive, rail, and shipping applications. A formula is given to calculate transport efficiency in ton-kilometers per liter based on factors like vehicle weight, speed, horsepower, and fuel volume.
More from andy appan (20)
Recently uploaded
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...Pitangent Analytics & Technology Solutions Pvt. Ltd
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Recently uploaded (20)
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
Automotive Rotary Engine Hp Kmpl Mp Ge
- 1. AUTOMOTIVE ROTARY ENGINE HP KMPL MPGe ALL FUEL SOLIDS, LIQUIDS, GAS, BIO.. 1/3 FUEL / HP , 2/3 CER, FUEL 3.92 Lit/Hr/1000 CC OD cmThk cmVol LSPEEDHPFuel L/hrKMPLMPGeCost$10250cc12080.30360850200255600cc2001002.35852003000346.51500cc2002535.9034807500 M A APPAN, M E , 45 Yrs EXPERT