If you are an Electrical Panel Manufacturer and looking for IP55 Testing And Certification for your Electrical Panel , then you are at the right place, We can provide you IP Testing and Certfication service. We have BIS, NABL and Tec Approved Lavoratory, We can do testing as per your Requirments.

1. Contact Us For IP Testing and Certification
Call: 08196980555| 07986633030
Are You Looking For
For IP55 Testing and Certification Electrical Panel?
We Have BIS, NABL, TEC Approved Laboratory

2. Contact Us For IP Testing and Certification
Call: 08196980555| 07986633030
How to Get IP55 Testing and
Certification for Electrical
Panel?
Here is the process of Getting IP55 Testing and Certification
for Electrical Panel, We can do Electrical Panel IP55 Testing
as per IEC EN 60529 Standard
Two types of IP55 Testing:
1. IP55 Dust proof Testing and
2. IP55 Rainproof/waterproof Testing

3. Contact Us For IP Testing and Certification
Call: 08196980555| 07986633030
Test Method For IP55
Dust Proof Testing:
Electrical Panel tested in a dust chamber, in which talcum
powder is maintained in suspension by an air current. The
chamber shall contain 2 kg of powder for every cubic meter of
its volume. The talcum powder used shall be able to pass
through a square-meshed sieve whose nominal wire diameter is
50 u m and whose nominal free distance between wires is 75 u
m. It shall not have been used for more than 10 tests.

4. Contact Us For IP Testing and Certification
Call: 08196980555| 07986633030
Test Method For IP55
RainProof/Waterproof Testing
• Test for second characteristic numeral 5 with the
6,3mm nozzle.
• The test is made by spraying the enclosure from all
practicable direction with a stream of water from a
standard the nozzle as show in Figure 6.

5. Contact Us For IP Testing and Certification
Call: 08196980555| 07986633030
The Conditions To Be
Observed are as follows:
• Internal diameter of the nozzle 6,3mm
• Delivery rate: 12,51/min±5%
• Water pressure: to be adjusted to achieve the specified
delivery rated
• Core of the substantial stream circle of approximately
40mm diameter at 2,5m distance from nozzle

6. Contact Us For IP Testing and Certification
Call: 08196980555| 07986633030
The Conditions To Be
Observed are as follows:
• Test duration per square meter of enclosure surface
area likely to be sprayed: 1 min
• Minimum test duration 3minuts
• Distance from nozzle to enclosure surface between
2,5m and 3m.

7. Contact Us For IP Testing and Certification
Call: 08196980555| 07986633030
What is the charge of IP55
Testing for Electrical Panel?
• Charges depend on product dimensions, Costing
Start from 10000 to 1lakh

8. Contact Us For IP Testing and Certification
Call: 08196980555| 07986633030
What are the duration or Time
periods of IP55 Testing for
Electrical Panel?
You will get a test report within a week

9. Contact Us For IP Testing and Certification
Call: 08196980555| 07986633030
What is the Test Equipment’s
used for IP 55?
1. Instrument used for IP Dustproof Testing: Sand and
dust test chamber
2. Instrument used for IP Waterproof /Rainproof Testing:
Rain test chamber
If you want to Purchase/Buy IP55 Testing equipment,
Please feel free to contact us

10. Contact Us For IP Testing and Certification
Call: 08196980555| 07986633030
IP55 Testing
and
Certification
We have a testing facility of IP55 Testing and Certification
to provide you an official quotation please share Product's
details like (dimensions + photo).

11. Thanks For
Watching
 For Any Clarification Please Feel Free
To Call us.
+91-8196980555
+91-7986633030
Please Like, Share, Comment and Don't Forget
To Subscribe Our Channel For more updates