<div><strong><a>Application manual of 3 d sublimation vacuum machine</a></strong><object height="510" width="477"><param /><param /><param /><param /></object><div>View more <a>documents</a> from <a>Bestsub</a>.</div></div>
Customer Bulletin 0515 A Comparison of ISO ISO-C1 and HT-300Dyplast Products
PURPOSE
This Customer Bulletin is part of a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products. Marketing literature on the internet and in printed media address the physical and performance characteristics of competing polyisocyanurate rigid foam insulations fabricated from bunstock. As is often the case, some literature can be misleading and/or in some cases there may not be sufficient information to credibly compare products. This Customer Bulletin provides factual, clarifying information which should allow for an objective comparison of Dyplast’s ISO-C1® with HiTherm’s HT-300 (each 2 lb/ft3 density).
http://www.registratiea-firmi.com/ предлогает вам полный пакет услуг по регистрации компаний в Ченогорье
Registratiea-Firmi.com является подразделением www.bridgewest.eu/
BridgeWest.eu является международной консалтинговой компанией на Кипре для международных клиентов, которые хотят расшириться на европейском рынке. Наша компания была создана людьми с большим опытом в оказании помощи иностранным клиентам в их бизнесе по всему континенту.
Marks Sattin Accounting Sector Market Research Presentation - Sydneyieuan84
Marks Sattin recently surveyed 1586 Finance professionals. This presentation reveals key findings within the Accounting Sector in Sydney and includes research on:
Feelings on the current market and the potential impact
Job seeking behaviour
Job satisfaction
Customer Bulletin 0515 A Comparison of ISO ISO-C1 and HT-300Dyplast Products
PURPOSE
This Customer Bulletin is part of a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products. Marketing literature on the internet and in printed media address the physical and performance characteristics of competing polyisocyanurate rigid foam insulations fabricated from bunstock. As is often the case, some literature can be misleading and/or in some cases there may not be sufficient information to credibly compare products. This Customer Bulletin provides factual, clarifying information which should allow for an objective comparison of Dyplast’s ISO-C1® with HiTherm’s HT-300 (each 2 lb/ft3 density).
http://www.registratiea-firmi.com/ предлогает вам полный пакет услуг по регистрации компаний в Ченогорье
Registratiea-Firmi.com является подразделением www.bridgewest.eu/
BridgeWest.eu является международной консалтинговой компанией на Кипре для международных клиентов, которые хотят расшириться на европейском рынке. Наша компания была создана людьми с большим опытом в оказании помощи иностранным клиентам в их бизнесе по всему континенту.
Marks Sattin Accounting Sector Market Research Presentation - Sydneyieuan84
Marks Sattin recently surveyed 1586 Finance professionals. This presentation reveals key findings within the Accounting Sector in Sydney and includes research on:
Feelings on the current market and the potential impact
Job seeking behaviour
Job satisfaction
Dressta TD-40C Crawler Dozer Bulldozer Service Repair Manual S/N 1501 and upfujsejjkekmme
This is the Highly Detailed factory service repair manual for theDRESSTA TD-40C CRAWLER DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.DRESSTA TD-40C CRAWLER DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
Cooling System
Electrical
Engine
Hydraulic Torque Converter
Transmission
Steering System
Sprocket Drive
Track and Track Frame Assembly
Hydraulics
Mounted Equipment
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveDRESSTA TD-40C CRAWLER DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
State of ICS and IoT Cyber Threat Landscape Report 2024 preview
Application manual of 3 d sublimation vacuum machine
1. Application Manual
of
3D Sublimation Vacuum Machine
Preface
Thanks for choosing products from BestSub Technologies. Please read the Application
Manual carefully before application. This Manual consists of application instruction and
notes, frequently asked questions and solutions etc.
WARNING: incorrect operation could cause unexpected incidents.
For your security as well as good protection of the machine under proper operation and
the maximum returns of investment, we strongly recommend you to read though this
Application Manual when you handle the machine for the first time, regardless how you
are familiar with products alike.
2. Contents
Application Manual ........................................................................................................................... 1
of.......................................................................................................................................................... 1
3D Sublimation Vacuum Machine.................................................................................................. 1
Preface ............................................................................................................................................... 1
Contents ............................................................................................................................................. 2
1 Safety Issues............................................................................................................................. 3
1.1 Electric Shock (!) .......................................................................................................... 3
1.2 Fire Prevention (!) ........................................................................................................ 3
1.3 Injury Prevention (!) ..................................................................................................... 4
1.4 Other Issue .................................................................................................................... 4
1.4.1 Delivery and Installation .................................................................................. 4
1.4.2 Wiring and Installation ..................................................................................... 4
1.4.3 Commissioning ................................................................................................. 5
1.4.4 Decommissioning and Dispose ..................................................................... 5
2 General Introduction ................................................................................................................ 5
3 Application Scope and Characteristics ................................................................................. 6
3.1 Application ..................................................................................................................... 6
3.2 Suitable Materials ......................................................................................................... 6
3.3 Characteristics .............................................................................................................. 6
4 Specification .............................................................................................................................. 7
5 Technical Parameters .............................................................................................................. 7
6 Application Description ............................................................................................................ 8
6.1 Installation and Commissioning ................................................................................. 8
6.2 Power On & Pre-heating ............................................................................................. 9
6.3 Printing Manipulation ................................................................................................... 9
6.4 Power Off ..................................................................................................................... 10
7 FAQ and Solutions ................................................................................................................. 10
7.1 Maintenance and Components Replacement (after the machine cools) .........10
7.2 FAQ and Solutions ..................................................................................................... 11
8 Reference ................................................................................................................................ 11
9 Electric Diagram ..................................................................................................................... 13
3. 1 Safety Issues
1.1 Electric Shock (!)
In order to prevent electric shock, please keep the case of the vacuum machine closed
when connecting it with power.
In order to prevent electric shock caused by the contact of high voltage interface and
charged components, please shut down the machine when open the case.
To prevent electric shock, even when the power is off, please keep the case of driver and
controller closed except for overhaul.
Please wiring and check- up of the machine shall be done 10 minutes after the power is
cut off and the remaining voltage is vanished when confirmed by multimeters.
Please make sure that the machine is grounded.
All wiring and check shall be carried out by professionals.
Wet handed operation is prohibited.
Please check cables connected to the machine and make sure the cables are not
damaged and not pressed by heavy objects in case of electric shock.
Please avoid exchanging component when the machine is connected to power, or danger
would occur.
1.2 Fire Prevention (!)
In order to avoid fire, please keep explosives away from the machine when the internal
temperature of the machine >150℃.
To avoid fire caused by powerful current, please cut the power at the power side in case of
accident.
To avoid fire, please make sure the machine is under surveillance during running.
To avoid fire caused by high temperature, the power shall be cut off only when the internal
temperature of machine is under 100℃ after the machine is stop from running.
To avoid fire, please pull the platform out of the box for cooling down and cut power off
when the machine is unexpectedly stopped or in case of power outage.
4. 1.3 Injury Prevention (!)
Please work with protective gloves, bare hand operation is prohibited, which would cause
burning by the edge of the platform or the objects.
Make sure the machine is connected to the rated voltage as regulated in the Application
Manual, or explosion and damage would occur.
Keep wires dry and make sure cables are firmly connected with right interfaces.
In order to prevent burning, do not touch the platform directly without any protective
gloves when the machine is running or immediately after stop.
The height of the printing targets shall be lower than the maximum height of the box
entrance, or the platform and the machine would be damaged.
Do not put hand into the entrance of the platform in case of injury.
1.4 Other Issue
Please be careful with the following issues in case of accidents, injury, electric shock and
damage.
1.4.1 Delivery and Installation
Please handle and move the machine with proper lifting apparatus to avoid damage.
Packing boxes of the machine shall avoid stacking, inclining or inverting. Please be
careful in moving without shocking.
Do not turn on the machine when elements are found missing or damaged. The cooling
fan vent at the top of the machine shall not be covered.
Operational Environment:
Temperature: -15℃~60℃
Humidity: ≤90%
Keep the machine away from corrosive gas, inflammable gas or fog, etc.
1.4.2 Wiring and Installation
Please install the machine in noise filtered environment if the voltage is instable, or to
connect the machine with matchable voltage stabilizer with the help of proper cables.
5. 1.4.3 Commissioning
Check all the parameters and make sure the start would be safe. Do not remould the
machine, and inspection and commissioning are demanded after being put unused for a
long time.
1.4.4 Decommissioning and Dispose
The machine shall be disposed as industrial waste.
2 General Introduction
This 3D vacuum sublimation machine is featured with a sealed thermal circulating system
with outstanding thermal insulation, vacuum transfer system and an accurate driving
controlling system. In addition, the machine is perfect in thermal insulation and energy
conservation, capable of image transfer on surfaces or sides of 3 dimensional subjects.
6. 3 Application Scope and Characteristics
3.1 Application
This 3D sublimation vacuum machine is designed with the capacity of transferring print
onto any proceeded 3D objects, without carving and chromatography printing. Besides,
the one-stop printing with the machine is limitless either in quantity or color. The printing
appears clear, vivid and color fading resistant, making it perfect for various printing, such
as customized products, digital products, advertising materials and building materials.
3.2 Suitable Materials
Applicable materials include coated pearl sheet, crystal, wood, chemical fabric, cloth
leather, metal board, photo slate, coated slate, ceramic tile, glass tile, glass board, glass
clock, photo crystal, coating crystal, T-shirts and mouse pads etc.
3.3 Characteristics
High efficiency and energy conservative
With the equipment of heating system and the effective thermal circulating system,
the machine can reach 180℃ within 10-20 minutes, thus shortening the heating time
and improving efficiency. Also, the box inside is conditioned with even temperature.
The heating balance for the new material to the box is fast, which saves energy
consumption and enhancing transferring quality.
Cost effective
Air-compressors and hydraulic systems are avoided, reducing costs. The design of
efficient thermal preservation in the box further saves thermal loss which decreases
the producing costs.
Eco-friendly
With the sealed electric heating system, air pollution is avoided during printing. Due
to the application of a vacuum pump and soundless ball bearing tracks, vibrating
noise is largely reduced.
Durable
The machine is equipped with advanced highly elastic screen, two-side coated
thermal proof silicon and fluoro-rubber coated layers, make it elastic, durable and
suitable for continuous processing under high temperature.
Widely applicable and competitive
The machine is suitable for transfer printing on various special 3D subjects, resulting
in sound printing effect with the vacuum pressing and tight wrapping technology.
7. 4 Specification
5 Technical Parameters
Type 3D Sublimation Vacuum Machine
Item SZK3D
Working voltage (V/Hz) 220/50
Rated voltage (Kw) 4
Temperature (℃) 0~300
Maximum vacuum (kpa) 0.1
Working size (mm) 500×500
Dimension (mm) L*W* H 1600*1100*1400
Preheating (M) 10
Weight (kg) 350
Height of Input Entrance(mm) 80
8. 6 Application Description
6.1 Installation and Commissioning
1. Unpack the package and check if any components missing or damaged;
2. Mounting the machine in line with the provided Manual;
3. Connect the machine with the right power source. Note: Make sure the power
matches the rated voltage in case of danger.
4. Check the power source; make sure the level of vacuum pump oil is higher than the
normal level; check the voltage at the wiring point, normally between -0.04~0.08Mpa;
check the set temperature 170~200℃ and timer at 30 seconds to 10 minutes. Upon
confirmation, proceed with the following step as in figure 1 to 4;
Figure one: controlling board and instruments
Figure two: Voltage at wiring points Figure three: time relay
9. Figure four: Auto temperature controller
6.2 Power On & Pre-heating
1. Turn on the power switch clockwise and the instruments start working;
2. Turn the vacuum pump switch to “on”, then the pump starts working till reaching the
rated pressure (normally at 0.1 mpa);
3. Turn on the circulating fan to “warm-up”, set the time relay at around 20 minutes
which can avoid repeated alarm, and set the time according to different subjects;
4. Turn on heating switch A and B, set the temperature controller to 180℃. Then the
actual temperature will display accordingly. As the machine is heating, the
temperature will keep rising continuously. When the time relay reads 10 to 20 minutes,
the machine stars working.
6.3 Printing Manipulation
1. Turn on the circulating fan to “circulating”, and set the time relay at the needed time
according to the target.
2. Pull out the board and turn the loading pallet to the middle or “loading”. Open the
upper part of the board, put the target in with the paper facing upward; buckle the
upper part, turn the loading pallet to “vacuum”, and the platform extracts air which
making the thermal elastic film fixing the target firmly.
3. Push in the platform to trigger the limit switch and the timer starts working. When the
time is up, it buzzes. Pull the platform out of the box, turn the loading pallet to
“Loading” and take out the printed subtract after opening the upper part. For
continuous printing, repeat step 3;
4. Tear off the transfer paper and check the printing, and then pack after cooling.
10. 6.4 Power Off
1. Press the stop button, switch the circulating fan to “warm-up”, vacuum pump switch to
“off”, pull the platform out of the box and open the upper cover of the platform. Then
turn the vacuum switch to “vent” and wait the air pressure back to 0. Finally, set the
delayed time to over 20 minutes for cooling.
2. The temperature will decreases on the controller. When the temperature is lower than
80℃, push the platform into the box and turn the power switch off.
7 FAQ and Solutions
7.1 Maintenance and Components Replacement (after the machine
cools)
Figure Eight Cross-section of the Machine
1. Replacing the heat-proof elastic silicon: open the upper layer of the platform till it
against the case; dismount the buckle of the upper layer (6), and the heat-proof
elastic silicon screen (3). Then put the trimmed new screen onto the layer, and
press it with the buckle. Note: the screen shall not be too tight.
2. Replacing the lower layer: open the upper layer of the platform and take base
11. plate (8) out, and dismount the sealing strip (5) alone the edge of the platform (4),
press the buckle of the sealing strip into the edge of the platform (4) and press
tight downward.
3. Replacing the carbon heating component: turn off the power and take down the
plug at the back of the machine, dismount the cooling fan on the top of the case
and open the lock of side of the machine, and take down the cover of the case
and reverse cautiously. Disconnect the heating component which shall be
replaced, and connect a new heating component with the same method and
press tight the interface.
4. Refill the vacuum pump oil: when the oil level is lower than the middle line on the
oil window, you need refill the pump oil as the follows. Turn off the power and
open the oil plug carefully and refill the oil until it rises above the middle line. Note:
the oil shall not be too full to prevent spilling out. Besides, When the oil becomes
dark or heavily polluted, the oil shall be refilled.
7.2 FAQ and Solutions
N.O. Malfunction Reasons Solutions
1 unclear image and incomplete Time is too short Prolong the time
transfer Temperature is too low Increase the temperature
2 clear image but over-transferred Time is too long shorten the time
Temperature is too high Decrease the temperature
3 Unclear image with vague edge Fixing between the transfer Adjust the pressure or press
paper and the subject is loose, the surface manually
low pressure or air remain
4 Vacuum pump unstoppable Short circuit or air leakage Check the pipe and the
platform
5 Slow in air extracting Low vacuum pump oil level Refill the oil
6 uneven transfer in large area Malfunctioned heat elements or Check and replace heat
printing or the heat time longer heat fan damaged elements and heat fan.
than 30 minutes
8 Reference
N.O Printing Material Time and Temp
12. (for reference)
1 Textile, apparel, mouse pads and pillows 30~50s, 150~180℃
2 pre-coated metals: sheet, aluminum and 1-mm plate: 1~2 mins, 180℃; heavier plate with
stainless steel and etc. longer printing time
3 Ceramic plate, tiles and glass etc. 4 mins, 180℃
4 Aluminum alloy 2~4 mins, 180℃
5 Irregular shaped crystal, such as ashtray, trophy 6~8 mins, 180℃
or decoration stuffs.
6 Stone, bamboo, and wood etc. 8~10 mins, 180℃