1. AMO Corporation
Rotary Kit Encoder Data Sheet:
Model: WKK-101.14-0064-1-5
Output: 2048 Sine Waves/Rev (1 v p-p)
100° C operating temp
Max Rotation Velocity: 37,500 RPM
1 m cable
Voltage: +5 v dc
Electronics in 15 pin D connector
(as shown above)
WZR-100-0064-1 Tooth Wheel
1 Reference Index
Tooth Wheel ID as specified
Installation:
Put 0.15 mm (.006”) shim between Encoder
Head and Tooth Wheel at Reference Index
position (black triangle) and push Encoder Head
against Tooth Wheel.
Gap & tolerance: 0.15 mm ± 0.1 mm
Reference Index Setup:
Black Triangle end of Encoder Head must match
up with the Index mark on Tooth Wheel
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By: