This document provides an example of classifying a mixture called "Sao Boso PJI Mix" according to the GHS system without using an automated classification system. It lists the ingredients in the mixture and their hazards. It then determines the hazards of the mixture based on the hazards of its ingredients. The key hazards of the mixture are that it is flammable, harmful if swallowed, causes skin and eye irritation, and may cause respiratory and central nervous system effects. The document concludes by providing the full GHS label elements for the mixture including pictograms, signal word, hazard statements, and precautionary statements.
This document describes the classification of a mixture called the Sao Boso PJI Mix according to the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). It identifies the ingredients in the mixture and their percentages and hazards. Based on the ingredients, it determines the appropriate hazard classification, pictograms, signal word, and precautionary statements for the mixture. The mixture is classified as flammable, acute oral toxicant, skin and eye irritant, and may cause respiratory irritation and drowsiness.
This safety data sheet provides information on the product Alu-Chrom Spray. It lists the product ingredients including ethyl acetate, propane, xylene, butane, isobutane, and aluminium powder. It describes the product as an aerosol containing flammable and irritating components. The document provides handling, storage, exposure, and disposal guidance to minimize health and environmental risks.
Benzamide,2,6-difluoro- (cas 18063-03-1) MSDS provides information on the product including identification, hazards, composition, safe handling and storage, exposure controls, accidental release measures, physical and chemical properties, toxicity, ecological information, and regulatory information. The document indicates the product may cause skin, eye and respiratory irritation upon contact or inhalation and is harmful if inhaled. Proper protective equipment should be used when handling the product.
This document provides a safety data sheet for Mipa 1K-Fastfiller grau, a knife filler and surfacer. It lists the product ingredients and identifies those that are hazardous, including xylene, butan-1-ol, ethanol, n-butyl acetate, ethyl acetate, bisphenol, phosphoric acid, and solvent naphtha. It also provides handling guidelines, protective equipment recommendations, and emergency procedures for accidental release. The product contains flammable and hazardous materials and proper precautions should be taken when using it.
This document provides safety information for a 2K-Plastic-Grundierfiller product. It contains hazardous chemicals including xylene, ethyl acetate, and solvent naphtha. The product is highly flammable and harmful if inhaled, in contact with skin, or if swallowed. It can cause irritation to eyes, skin, and respiratory tract. In the event of contact, remove contaminated clothing and rinse area with water. Seek medical help if symptoms persist. The product requires proper storage and handling to prevent fire or exposure.
This safety data sheet provides information on diesel fuel products including Eurodiesel BS Class, Eurodiesel BS, Diesel, and Diesel Blue. It identifies the products and supplier, lists hazards such as flammability and potential health effects, and provides guidance on handling, storage, exposure controls, firefighting, accidental release measures, and other safety information.
This document provides an MSDS (Material Safety Data Sheet) for the chemical compound 5-Bromo-2-chloropyridine (CAS 53939-30-3). It lists the product as being a skin and eye irritant that may cause respiratory irritation. The document provides information on the product's properties, safety precautions, first aid measures, handling and storage instructions, exposure controls, physical and chemical properties, stability, toxicity, ecological data, disposal considerations and transport information.
1. This document provides information on the chemical 5-Bromo-2-chloropyrimidine (CAS 32779-36-5), including its hazards, safe handling and storage, first aid measures, and regulatory information.
2. 5-Bromo-2-chloropyrimidine is an irritant and may cause skin, eye and respiratory irritation upon contact. It has a melting point between 73-79°C and molecular weight of 193.43 g/mol.
3. Proper protective equipment should be worn when handling this chemical. If contact occurs, rinse thoroughly with water and seek medical advice. Store in a cool, dry and
This document describes the classification of a mixture called the Sao Boso PJI Mix according to the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). It identifies the ingredients in the mixture and their percentages and hazards. Based on the ingredients, it determines the appropriate hazard classification, pictograms, signal word, and precautionary statements for the mixture. The mixture is classified as flammable, acute oral toxicant, skin and eye irritant, and may cause respiratory irritation and drowsiness.
This safety data sheet provides information on the product Alu-Chrom Spray. It lists the product ingredients including ethyl acetate, propane, xylene, butane, isobutane, and aluminium powder. It describes the product as an aerosol containing flammable and irritating components. The document provides handling, storage, exposure, and disposal guidance to minimize health and environmental risks.
Benzamide,2,6-difluoro- (cas 18063-03-1) MSDS provides information on the product including identification, hazards, composition, safe handling and storage, exposure controls, accidental release measures, physical and chemical properties, toxicity, ecological information, and regulatory information. The document indicates the product may cause skin, eye and respiratory irritation upon contact or inhalation and is harmful if inhaled. Proper protective equipment should be used when handling the product.
This document provides a safety data sheet for Mipa 1K-Fastfiller grau, a knife filler and surfacer. It lists the product ingredients and identifies those that are hazardous, including xylene, butan-1-ol, ethanol, n-butyl acetate, ethyl acetate, bisphenol, phosphoric acid, and solvent naphtha. It also provides handling guidelines, protective equipment recommendations, and emergency procedures for accidental release. The product contains flammable and hazardous materials and proper precautions should be taken when using it.
This document provides safety information for a 2K-Plastic-Grundierfiller product. It contains hazardous chemicals including xylene, ethyl acetate, and solvent naphtha. The product is highly flammable and harmful if inhaled, in contact with skin, or if swallowed. It can cause irritation to eyes, skin, and respiratory tract. In the event of contact, remove contaminated clothing and rinse area with water. Seek medical help if symptoms persist. The product requires proper storage and handling to prevent fire or exposure.
This safety data sheet provides information on diesel fuel products including Eurodiesel BS Class, Eurodiesel BS, Diesel, and Diesel Blue. It identifies the products and supplier, lists hazards such as flammability and potential health effects, and provides guidance on handling, storage, exposure controls, firefighting, accidental release measures, and other safety information.
This document provides an MSDS (Material Safety Data Sheet) for the chemical compound 5-Bromo-2-chloropyridine (CAS 53939-30-3). It lists the product as being a skin and eye irritant that may cause respiratory irritation. The document provides information on the product's properties, safety precautions, first aid measures, handling and storage instructions, exposure controls, physical and chemical properties, stability, toxicity, ecological data, disposal considerations and transport information.
1. This document provides information on the chemical 5-Bromo-2-chloropyrimidine (CAS 32779-36-5), including its hazards, safe handling and storage, first aid measures, and regulatory information.
2. 5-Bromo-2-chloropyrimidine is an irritant and may cause skin, eye and respiratory irritation upon contact. It has a melting point between 73-79°C and molecular weight of 193.43 g/mol.
3. Proper protective equipment should be worn when handling this chemical. If contact occurs, rinse thoroughly with water and seek medical advice. Store in a cool, dry and
This safety data sheet provides information on LOCTITE BLACK MAXX 300 TB 70ML, including its composition and safety hazards. It contains silicon compounds, butan-2-one O,O',O'',O'''-silanetetrayltetraoxime, and butanone oxime. Exposure can cause serious eye damage, skin sensitization, and is suspected of causing cancer. The document outlines exposure limits, first aid measures, handling and storage requirements, and other safety information for proper use.
Pigment red 146 red fbb 5280-68-2 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
This document provides information on the chemical 2-Bromo-5-fluorotoluene (CAS 452-63-1) including its hazards, safe handling and storage, and physical properties. It identifies the chemical as flammable and an irritant to eyes, skin, and respiratory system. Personal protective equipment including gloves, protective clothing, and eye protection are recommended when handling it. The chemical has a flash point of 45°C and should be stored away from ignition sources in a cool, well-ventilated area.
Acvm safety data sheet, a new type of PVC processing aid and impact modifier ...王 全权
WestMoonint is a manufacturer and supplier of synthetic rubber and chemicals located in Chengdu, China. The document provides a safety data sheet for one of its powder products. The product is mostly comprised of two trade secret substances that are not considered hazardous. The powder can form explosive mixtures with air and precautions are outlined to safely handle, store, and dispose of the product. The product has low acute toxicity but prolonged exposure to airborne dust can cause lung irritation.
This document provides safety information for the product ZOXIS. It identifies the product as a fungicide containing the active ingredient azoxystrobin. Key information includes:
- Hazards associated with the product include skin sensitization and being very toxic to aquatic life with long lasting effects.
- The product supplier details are provided.
- Personal protective equipment should be worn when handling the product.
- In the event of a spill, contaminated areas should be cleaned and the product collected for disposal.
- The product should be stored in a cool, well-ventilated place and kept away from ignition sources.
This document provides information on the product 3,4-difluoronitrobenzene (cas 369-34-6), including its identification, hazards, composition, safe handling and storage recommendations, exposure controls, physical and chemical properties, toxicity, ecological information, and regulatory information. It identifies the product as potentially causing skin and eye irritation upon contact or if inhaled.
This safety data sheet provides information on the product NeoNet L 500. It identifies the product, supplier contact information, product composition, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other information. The main hazardous components are identified as CIPC (47-51%) which is suspected of causing cancer and may cause damage to organs through prolonged or repeated exposure.
This safety data sheet provides information on LOCTITE BLACK MAXX 300 TB 70ML, including its composition and safety hazards. It contains silicon compounds, butan-2-one O,O',O'',O'''-silanetetrayltetraoxime, and butanone oxime. Exposure can cause serious eye damage, skin sensitization, and is suspected of causing cancer. The document outlines exposure limits, first aid measures, handling and storage requirements, and other safety information for proper use.
Pigment red 146 red fbb 5280-68-2 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
This document provides information on the chemical 2-Bromo-5-fluorotoluene (CAS 452-63-1) including its hazards, safe handling and storage, and physical properties. It identifies the chemical as flammable and an irritant to eyes, skin, and respiratory system. Personal protective equipment including gloves, protective clothing, and eye protection are recommended when handling it. The chemical has a flash point of 45°C and should be stored away from ignition sources in a cool, well-ventilated area.
Acvm safety data sheet, a new type of PVC processing aid and impact modifier ...王 全权
WestMoonint is a manufacturer and supplier of synthetic rubber and chemicals located in Chengdu, China. The document provides a safety data sheet for one of its powder products. The product is mostly comprised of two trade secret substances that are not considered hazardous. The powder can form explosive mixtures with air and precautions are outlined to safely handle, store, and dispose of the product. The product has low acute toxicity but prolonged exposure to airborne dust can cause lung irritation.
This document provides safety information for the product ZOXIS. It identifies the product as a fungicide containing the active ingredient azoxystrobin. Key information includes:
- Hazards associated with the product include skin sensitization and being very toxic to aquatic life with long lasting effects.
- The product supplier details are provided.
- Personal protective equipment should be worn when handling the product.
- In the event of a spill, contaminated areas should be cleaned and the product collected for disposal.
- The product should be stored in a cool, well-ventilated place and kept away from ignition sources.
This document provides information on the product 3,4-difluoronitrobenzene (cas 369-34-6), including its identification, hazards, composition, safe handling and storage recommendations, exposure controls, physical and chemical properties, toxicity, ecological information, and regulatory information. It identifies the product as potentially causing skin and eye irritation upon contact or if inhaled.
This safety data sheet provides information on the product NeoNet L 500. It identifies the product, supplier contact information, product composition, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other information. The main hazardous components are identified as CIPC (47-51%) which is suspected of causing cancer and may cause damage to organs through prolonged or repeated exposure.
1. A METHOD FOR ASSIGNING GHS HAZARD COMMUNICATION PICTOGRAMS
TO A PREPARATION/MIXTURE WITHOUT AN AUTOMATED CLASSIFICATIONS SYSTEM
Theodore M. Amet
Regulatory Research Analyst
This is training material. Not for private, public or industrial use.
Table 1. Sao Boso PJI Mix
Ingredient/Component Name CAS # EC # % GHS Hazard Pictograms
Pentan-2-one 107-87-9 203-528-1 30 - 50 -
Ethanol 64-17-5 200-578-6 10 - 25 - -
Tributylmethylammonium chloride 56375-79-2 260-135-8 3 - 10 - -
1-methoxypropan-2-ol 107-98-2 203-539-1 3-8 -
Propyl acetate 109-60-4 203-686-1 1-3 -
Propan-2-ol 67-63-0 200-661-7 1-3 -
Butan-1-ol 71-36-3 200-751-6 1-3
GHS Label Elements
Pictogram
Signal word Danger
Table 2. Classification according to GHS (Substance/Ingredient/Chemical in Table 1)
CAS # EC# Index No. UN # % Product name Classification
According to GHS
107-87-9 203-528-1 - 1249 30 - 50 Pentan-2-one Flam. Liq. 2, H225
Acute Tox. 4* (oral), H302
Skin Irrit. 2, H315
Eye Irrit. 2, H319
STOT SE 3, H335
64-17-5 200-578-6 603-002-00-5 1170 10 - 25 Ethanol Flam. Liq. 2, H225
56375-79-2 260-135-8 - - 3 - 10 Tributylmethylammonium Skin irrit. 2, H315
chloride Eye irrit. 2, H319
STOT SE 3, H335
107-98-2 203-539-1 603-064-00-3 3092 3-8 1-methoxypropan-2-ol Flam. Liq. 3, H226
STOT SE 3, H336
109-60-4 203-686-1 607-042-00-6 1276 1-3 Propyl acetate Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
EUH066
67-63-0 200-661-7 603-117-00-0 1219 1-3 Propan-2-ol Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3; H336
71-36-3 200-751-6 603-004-00-6 1120 1-3 Butan-1-ol Flam. Liq.3, H226
Acute Tox. 4* (oral), H302
Skin Irrit. 2, H315
STOT SE 3, H335
Eye Dam. 1, H318
STOT SE 3, H336
1
2. Table 3. GHS Hazard Classification (Product - Sao Boso PJI Mix)
GHS Classification Category Hazard Statement Code(s) Hazard Statement(s)
Flam. Liq. 2 H225 Highly flammable liquid and vapor.
Acute Tox. (oral) 4 H302 Harmful if swallowed.
Skin irritant 2 H315 Causes skin irritation.
Eye Irrit. 1 H318 Causes serious eye irritation.
STOT SE: RTI 3 H335 May cause respiratory irritation.
STOT SE: NE 3 H336 May cause drowsiness or dizziness.
Classification of the Preparation/Mixture (Table 3)
Flammable liquids, Category 2, H225
Acute toxicity (oral), Category 4, H302
Skin corrosion/irritation, Category 2, H315
Serious eye damage/Eye irritation, Category 1, H318
Specific Target Organ Toxicity - Single exposure: Respiratory tract irritation, Category 3, H335
Specific Target Organ Toxicity - Single exposure: Narcotic effects, Category 3, H336
Indications of Danger: Highly flammable liquid. Irritating to eyes, skin and respiratory system.
Harmful if swallowed. Inhalation may cause drowsiness or dizziness.
Repeated exposure may cause skin dryness or cracking.
GHS Label Elements
Hazard Pictograms (see Table 1)
Signal word: Danger
Hazard statement(s)
H225: Highly flammable liquid and vapor.
H302: Harmful if swallowed.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H335: May cause respiratory irritation.
Precautionary statement(s)
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P233: Keep container tightly closed.
P240: Ground/bond container and receiving equipment.
P243: Take precautionary measures against static discharge.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
P310: Immediately call a POISON CENTER or doctor/physician.
P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
P501: Dispose of contents/container to be in accordance with local/regional/national regulations.
Other hazards which do not result in classification: Repeated exposure may cause skin dryness or cracking.
Note:
In the above example (mixture classification), retain corrosive hazard pictogram ( ) if pH of mixture is either highly acidic
(pH ≤ 2.0) or highly basic/alkaline (pH ≥ 11.5) (refer to GHS criteria on corrosives).
2
3. References:
1. Various Internet sources.
2. http://chemsub.online.fr/
3. http://www.unece.org/fileadmin/DAM/trans/danger/publi/ghs/ghs_rev04/English/ST-SG-AC10-30-Rev4e.pdf
3