This document is a timetable listing course codes, course names, programmes, number of students, and classrooms/halls for the UTM Diploma Final Examination Session 2 for 2013/2014. It spans 3 pages and includes over 100 courses taking place between April 7-20, 2014 at various times and locations on the UTM campus. The majority of courses have under 200 students and will be held in Block C, Block D, or the Peryatim Hall.
The report summarizes the findings of a committee set up by the Ministry of Health to investigate organ pledging and donation trends in Malaysia over the years. It finds that while the number of organ pledges increases following public awareness campaigns, actual donations remain low due to families refusing to donate organs of deceased loved ones. The Chinese community contributes the most organ pledges compared to other ethnic groups. However, getting family consent remains the biggest challenge to increasing organ donations. The report makes recommendations to address issues of lack of awareness, cultural and religious sensitivities that discourage organ donation among Malaysians.
Dokumen tersebut membahas tentang persepsi sosial, yang merupakan proses pemahaman seseorang terhadap orang lain atau realitas sosial. Persepsi sosial terbentuk dari tiga elemen yaitu pribadi, situasi, dan perilaku. Persepsi sosial dapat mempengaruhi perilaku sosial meskipun dapat menimbulkan kesalahan jika didasarkan pada sudut pandang sempit seperti stereotip atau gema.
This document is an academic transcript for Jonathan Sprague documenting his coursework and grades from 2013 to 2015 while pursuing a Bachelor of Science in Information Technology. It shows that he passed all of his courses with distinction, earning credits each year including 120 credits in 2013, 108 credits in 2014, and 132 credits in 2015. His overall performance has been excellent as he has maintained high grades throughout his degree program.
This document is the academic transcript of Hoo Hong Yoong from Universiti Tunku Abdul Rahman. It details his course of study in Bachelor of Engineering (Honours) Environmental Engineering from 2012 to 2016. He earned a total of 130 credit hours over this period, including 3 credits transferred from other studies. His final Cumulative Grade Point Average was 3.4746. He was awarded his degree with Merit in May 2016.
This document provides instructions and assessment criteria for a coursework report on milling manufacturing processes using CADCAM software. Students are asked to perform facing, pocketing, contouring, and drilling operations in CADCAM and include screenshots in a report. The report must include an objective, introduction to milling processes, a procedure section explaining the screenshots, a discussion of CAM software and its benefits, and references in APA style. Students will be evaluated on their geometry and stock setup, ability to complete the facing, contouring, pocketing, and drilling operations correctly, and quality of the written report in providing complete information and descriptions.
This document contains the academic transcripts of Rafizatus Sima binti Abd Rahman from Universiti Teknologi Malaysia over several semesters from 2013 to 2015. It shows the courses taken each semester, the grades received, credit points accumulated, grade point averages (GPAs), and overall classification of excellent. Rafizatus Sima has maintained high GPAs above 3.67 each semester and achieved first class honors classification in her final semester.
This document contains the academic transcripts of Rafizatus Sima binti Abd Rahman from Universiti Teknologi Malaysia over several semesters from 2013 to 2015. It shows the courses taken each semester, the grades received, credit points accumulated, grade point averages (GPAs), and overall classification of excellent. Rafizatus Sima has maintained high GPAs above 3.67 each semester and achieved first class honors classification in her final semester.
This document summarizes metrics for the Geotechnical Engineering discipline from 2012 quarter 4 through 2013 quarter 3. It shows the number of visits per quarter to the discipline increasing from 363 to 475 and then decreasing to 282. It also lists the top downloaded files and top 10 visitors with their number of visits and hits. The number of members in the discipline decreased slightly from 151 to 147 over this time period.
The report summarizes the findings of a committee set up by the Ministry of Health to investigate organ pledging and donation trends in Malaysia over the years. It finds that while the number of organ pledges increases following public awareness campaigns, actual donations remain low due to families refusing to donate organs of deceased loved ones. The Chinese community contributes the most organ pledges compared to other ethnic groups. However, getting family consent remains the biggest challenge to increasing organ donations. The report makes recommendations to address issues of lack of awareness, cultural and religious sensitivities that discourage organ donation among Malaysians.
Dokumen tersebut membahas tentang persepsi sosial, yang merupakan proses pemahaman seseorang terhadap orang lain atau realitas sosial. Persepsi sosial terbentuk dari tiga elemen yaitu pribadi, situasi, dan perilaku. Persepsi sosial dapat mempengaruhi perilaku sosial meskipun dapat menimbulkan kesalahan jika didasarkan pada sudut pandang sempit seperti stereotip atau gema.
This document is an academic transcript for Jonathan Sprague documenting his coursework and grades from 2013 to 2015 while pursuing a Bachelor of Science in Information Technology. It shows that he passed all of his courses with distinction, earning credits each year including 120 credits in 2013, 108 credits in 2014, and 132 credits in 2015. His overall performance has been excellent as he has maintained high grades throughout his degree program.
This document is the academic transcript of Hoo Hong Yoong from Universiti Tunku Abdul Rahman. It details his course of study in Bachelor of Engineering (Honours) Environmental Engineering from 2012 to 2016. He earned a total of 130 credit hours over this period, including 3 credits transferred from other studies. His final Cumulative Grade Point Average was 3.4746. He was awarded his degree with Merit in May 2016.
This document provides instructions and assessment criteria for a coursework report on milling manufacturing processes using CADCAM software. Students are asked to perform facing, pocketing, contouring, and drilling operations in CADCAM and include screenshots in a report. The report must include an objective, introduction to milling processes, a procedure section explaining the screenshots, a discussion of CAM software and its benefits, and references in APA style. Students will be evaluated on their geometry and stock setup, ability to complete the facing, contouring, pocketing, and drilling operations correctly, and quality of the written report in providing complete information and descriptions.
This document contains the academic transcripts of Rafizatus Sima binti Abd Rahman from Universiti Teknologi Malaysia over several semesters from 2013 to 2015. It shows the courses taken each semester, the grades received, credit points accumulated, grade point averages (GPAs), and overall classification of excellent. Rafizatus Sima has maintained high GPAs above 3.67 each semester and achieved first class honors classification in her final semester.
This document contains the academic transcripts of Rafizatus Sima binti Abd Rahman from Universiti Teknologi Malaysia over several semesters from 2013 to 2015. It shows the courses taken each semester, the grades received, credit points accumulated, grade point averages (GPAs), and overall classification of excellent. Rafizatus Sima has maintained high GPAs above 3.67 each semester and achieved first class honors classification in her final semester.
This document summarizes metrics for the Geotechnical Engineering discipline from 2012 quarter 4 through 2013 quarter 3. It shows the number of visits per quarter to the discipline increasing from 363 to 475 and then decreasing to 282. It also lists the top downloaded files and top 10 visitors with their number of visits and hits. The number of members in the discipline decreased slightly from 151 to 147 over this time period.
- This document is a marks sheet for Himansh Patek showing the results of his 4th semester exams in Civil Engineering at Government Polytechnic in Moradabad.
- It lists the courses taken, maximum marks, minimum marks to pass, and marks obtained for each course in both the regular exams and sessionals/activities.
- According to the total marks, Himansh received 843 out of 1270 marks and was promoted to the next semester with a backlog/need to re-take qualifying subjects.
The document provides details about brick masonry work being done at the Welcome Metro Station project. It discusses the materials used including mechanized autoclaved fly-ash lime bricks, cement, sand, and water. It describes the methodology for brick work such as stacking, soaking, cement mortar preparation, and brick laying. It also covers brick bonds, joints, curing, and tests conducted on bricks. The project aims to complete finishing work including brick masonry, tiling, waterproofing, stone works, painting and other activities at the new Welcome Metro Station.
PJBUMI Heavy Engineering & Services Sdn. Bhd. is an engineering company with divisions in property development, digital solutions, energy, and telecommunications. The intern's objectives were to adapt to the working environment, apply classroom knowledge, and learn new skills. During the internship, the intern assisted with tender proposals, project work, and administrative tasks like setting up meetings and editing company documents. The intern concluded that the experience provided valuable practical training and insights into engineering applications in industry.
Emerald, Devin - Record of Achievement [ NZQA ]Devin Emerald
This document is Devin Emerald's Record of Achievement from the New Zealand Qualifications Authority (NZQA). It lists over 100 standards across multiple levels and subjects that Devin achieved, including Business Administration, Computing, Construction, Driving, Health Studies, Mechanical Engineering, and Plumbing. The majority of the standards were achieved at Levels 1-4, with a few at Levels 5-6. Dates for the standards range from 2002 to 2016.
Emerald, Devin - Record of Achievement [ NZQA ]Devin Emerald
This document is Devin Emerald's Record of Achievement from the New Zealand Qualifications Authority (NZQA). It lists over 100 standards across multiple levels and subjects that Devin achieved, including Business Administration, Computing, Construction, Driving, Health Studies, Mechanical Engineering, and Plumbing. The majority of the standards were achieved at Levels 1-4, with a few at Levels 5-6. Dates for the standards range from 2002 to 2016.
- Jefferd Tan Han Kang studied Bachelor of Engineering (Honours) Mechanical Engineering at Universiti Tunku Abdul Rahman from January 2012 to January 2015.
- Over the course of his studies, he completed 114 credit hours and received exemptions for 9 credits.
- His final cumulative grade point average (CGPA) was 2.9103, with grades ranging from A to F across various engineering, science, and general education courses.
The document contains technical drawings and part lists for several mechanical assemblies including a knuckle joint, universal joint, shock absorber, chain and sprocket mechanism, differential gear box, and bench vice. The drawings include dimensions, materials, titles, and names and identification numbers of the designers. Accompanying text provides part numbers and quantities for the assemblies.
Bertrand Badinga has completed over 40 courses from January 2013 to October 2014 related to his position as an M/LWD Engineer II for Weatherford in Port Gentil, Gabon. The courses cover topics such as introduction to Weatherford, drilling tools technology, petroleum evaluation and drilling, well logging security, oilfield mathematics, electricity, gamma ray, borehole environment, and health and safety inductions. Badinga's training demonstrates his commitment to ongoing learning and development to perform his duties safely and effectively.
The document is a marks sheet for a student named Aanchal from Government Polytechnic Bijnor, showing their results for the 5th and 6th semesters of the Civil Engineering (Lateral Entry) program. It lists the marks obtained by Aanchal out of the maximum marks for each subject in both semesters, with an overall score of 1523 out of 2209 resulting in First Division. It notes that qualifying exams for back subjects will be conducted in the next semester, and the results shown are not final and should be verified with the institute.
This academic record summarizes Kundai Musuka's results for the Bachelor of Engineering (Civil and Construction Engineering) degree completed at the University. It shows the courses undertaken each semester from 2009 to 2014, the credits earned and grades received. In 2014, Kundai Musuka was conferred with the Bachelor of Engineering degree with Lower Second Class Honours. The record reflects the student's academic results as stored in the University's system.
This academic record summarizes the results for Koh Chee P'ng, student number 15103046, who completed a Bachelor of Engineering (Chemical Engineering) with First Class Honours. It details the units completed between 2010-2014, including course codes, titles, credits, grades, and marks. It also notes the student's course weighted average of 77.28, academic status of good standing, and date the course was completed as 17-Jul-2014.
This document is a transcript for a Bachelor of Electrical and Electronics Engineering (Honours) course. It lists the units completed and their results. The student has completed 10 units with high distinctions and distinctions. They are currently enrolled in 5 units in 2016 that are not yet marked. The transcript shows the student is progressing well through their degree with good results in most units.
This presentation was given at the EPA’s National Water Event 2019, which took place on 29 and 30 May 2019 in Galway. This presentation by Michael Goss from Irish Water is on addressing the challenges related to wastewater networks.
Dasmesh academy offers 60 different courses ranging from 10+1 and 10+2 medical and non-medical courses to entrance exams preparation for engineering, MBA, civil services, defense, fashion and more. The courses also include various computer applications, programming languages and technical skills training.
The document provides a training and course calendar for MishTraining from January to June 2016. It lists 18 categories of training courses including project management, contract management, construction engineering, mechanical engineering, and others. For each month, it outlines various courses offered within each category along with their scheduled dates. Accreditations from organizations like Highfield ABC and PMI are also listed on the document.
PT. WOO IL INDONESIA is an Indonesian steel fabrication company located in Tangerang, Banten. It was established in 1989 and has a 8,023 square meter workshop and 44,560 square meter yard. The company specializes in steel structure fabrication and erection for industrial projects. It has experience working on oil and gas, power plant, and mining projects. The document provides details on the company's capabilities, equipment, client list, and past project experience.
Chris Odle graduated from Lindenwood University in September 2015 with a Bachelor of Science degree in Information Technology, graduating Summa Cum Laude. Over six terms spanning from winter 2014 to summer 2015, Chris maintained a perfect 4.0 GPA across 54 credit hours of coursework in areas such as communications, networking, databases, and web development.
Chris Odle graduated from Lindenwood University in September 2015 with a Bachelor of Science degree in Information Technology, graduating Summa Cum Laude. Over six terms, Chris maintained a perfect 4.0 GPA across 54 credit hours earned, including courses in communications, networking, databases, web development, and project management. Chris' transcript shows consistent achievement of high grades in information technology and general education curriculum courses.
The document provides guidance on building an ideal maintenance program with four phases: 1) Planning and preparation which includes developing a coding system to organize assets, gathering machine information, and building a database. 2) Getting organized by creating shadow boards and tool crib organization. 3) Maintenance tracking and metrics such as work orders and site maps. 4) Continuous improvement through standardization, training, and enforcement of the maintenance program.
Work Sheet Aviation REMOVE AND INSTALL ANTI-COLLISION LIGHTS nurulothman5
This work sheet is intended to teach practical lesson for REMOVING AND INSTALLING ANTI-COLLISION LIGHTS . You can use this work sheet (kertas kerja) as Written Instuctional Material for those who study VOCATIONAL TRAINING OPERATION (VTO) in CIAST or in Pusat Bertauliah Kemahiran JPK (JPK approved training centre). The code for the work sheet is TP-060-3:2013 AIRCRAFT MAINTENANCE OPERATION. Competency code TP-060-3:2013-C05
AIRCRAFT ELECTRICAL SERVICING, by Akademi Era Gemilang and students. If you need more of this, drop an email to us.
More Related Content
Similar to Amended utm diploma_201320142_jadual_peperiksaan_akhir_with_venue_
- This document is a marks sheet for Himansh Patek showing the results of his 4th semester exams in Civil Engineering at Government Polytechnic in Moradabad.
- It lists the courses taken, maximum marks, minimum marks to pass, and marks obtained for each course in both the regular exams and sessionals/activities.
- According to the total marks, Himansh received 843 out of 1270 marks and was promoted to the next semester with a backlog/need to re-take qualifying subjects.
The document provides details about brick masonry work being done at the Welcome Metro Station project. It discusses the materials used including mechanized autoclaved fly-ash lime bricks, cement, sand, and water. It describes the methodology for brick work such as stacking, soaking, cement mortar preparation, and brick laying. It also covers brick bonds, joints, curing, and tests conducted on bricks. The project aims to complete finishing work including brick masonry, tiling, waterproofing, stone works, painting and other activities at the new Welcome Metro Station.
PJBUMI Heavy Engineering & Services Sdn. Bhd. is an engineering company with divisions in property development, digital solutions, energy, and telecommunications. The intern's objectives were to adapt to the working environment, apply classroom knowledge, and learn new skills. During the internship, the intern assisted with tender proposals, project work, and administrative tasks like setting up meetings and editing company documents. The intern concluded that the experience provided valuable practical training and insights into engineering applications in industry.
Emerald, Devin - Record of Achievement [ NZQA ]Devin Emerald
This document is Devin Emerald's Record of Achievement from the New Zealand Qualifications Authority (NZQA). It lists over 100 standards across multiple levels and subjects that Devin achieved, including Business Administration, Computing, Construction, Driving, Health Studies, Mechanical Engineering, and Plumbing. The majority of the standards were achieved at Levels 1-4, with a few at Levels 5-6. Dates for the standards range from 2002 to 2016.
Emerald, Devin - Record of Achievement [ NZQA ]Devin Emerald
This document is Devin Emerald's Record of Achievement from the New Zealand Qualifications Authority (NZQA). It lists over 100 standards across multiple levels and subjects that Devin achieved, including Business Administration, Computing, Construction, Driving, Health Studies, Mechanical Engineering, and Plumbing. The majority of the standards were achieved at Levels 1-4, with a few at Levels 5-6. Dates for the standards range from 2002 to 2016.
- Jefferd Tan Han Kang studied Bachelor of Engineering (Honours) Mechanical Engineering at Universiti Tunku Abdul Rahman from January 2012 to January 2015.
- Over the course of his studies, he completed 114 credit hours and received exemptions for 9 credits.
- His final cumulative grade point average (CGPA) was 2.9103, with grades ranging from A to F across various engineering, science, and general education courses.
The document contains technical drawings and part lists for several mechanical assemblies including a knuckle joint, universal joint, shock absorber, chain and sprocket mechanism, differential gear box, and bench vice. The drawings include dimensions, materials, titles, and names and identification numbers of the designers. Accompanying text provides part numbers and quantities for the assemblies.
Bertrand Badinga has completed over 40 courses from January 2013 to October 2014 related to his position as an M/LWD Engineer II for Weatherford in Port Gentil, Gabon. The courses cover topics such as introduction to Weatherford, drilling tools technology, petroleum evaluation and drilling, well logging security, oilfield mathematics, electricity, gamma ray, borehole environment, and health and safety inductions. Badinga's training demonstrates his commitment to ongoing learning and development to perform his duties safely and effectively.
The document is a marks sheet for a student named Aanchal from Government Polytechnic Bijnor, showing their results for the 5th and 6th semesters of the Civil Engineering (Lateral Entry) program. It lists the marks obtained by Aanchal out of the maximum marks for each subject in both semesters, with an overall score of 1523 out of 2209 resulting in First Division. It notes that qualifying exams for back subjects will be conducted in the next semester, and the results shown are not final and should be verified with the institute.
This academic record summarizes Kundai Musuka's results for the Bachelor of Engineering (Civil and Construction Engineering) degree completed at the University. It shows the courses undertaken each semester from 2009 to 2014, the credits earned and grades received. In 2014, Kundai Musuka was conferred with the Bachelor of Engineering degree with Lower Second Class Honours. The record reflects the student's academic results as stored in the University's system.
This academic record summarizes the results for Koh Chee P'ng, student number 15103046, who completed a Bachelor of Engineering (Chemical Engineering) with First Class Honours. It details the units completed between 2010-2014, including course codes, titles, credits, grades, and marks. It also notes the student's course weighted average of 77.28, academic status of good standing, and date the course was completed as 17-Jul-2014.
This document is a transcript for a Bachelor of Electrical and Electronics Engineering (Honours) course. It lists the units completed and their results. The student has completed 10 units with high distinctions and distinctions. They are currently enrolled in 5 units in 2016 that are not yet marked. The transcript shows the student is progressing well through their degree with good results in most units.
This presentation was given at the EPA’s National Water Event 2019, which took place on 29 and 30 May 2019 in Galway. This presentation by Michael Goss from Irish Water is on addressing the challenges related to wastewater networks.
Dasmesh academy offers 60 different courses ranging from 10+1 and 10+2 medical and non-medical courses to entrance exams preparation for engineering, MBA, civil services, defense, fashion and more. The courses also include various computer applications, programming languages and technical skills training.
The document provides a training and course calendar for MishTraining from January to June 2016. It lists 18 categories of training courses including project management, contract management, construction engineering, mechanical engineering, and others. For each month, it outlines various courses offered within each category along with their scheduled dates. Accreditations from organizations like Highfield ABC and PMI are also listed on the document.
PT. WOO IL INDONESIA is an Indonesian steel fabrication company located in Tangerang, Banten. It was established in 1989 and has a 8,023 square meter workshop and 44,560 square meter yard. The company specializes in steel structure fabrication and erection for industrial projects. It has experience working on oil and gas, power plant, and mining projects. The document provides details on the company's capabilities, equipment, client list, and past project experience.
Chris Odle graduated from Lindenwood University in September 2015 with a Bachelor of Science degree in Information Technology, graduating Summa Cum Laude. Over six terms spanning from winter 2014 to summer 2015, Chris maintained a perfect 4.0 GPA across 54 credit hours of coursework in areas such as communications, networking, databases, and web development.
Chris Odle graduated from Lindenwood University in September 2015 with a Bachelor of Science degree in Information Technology, graduating Summa Cum Laude. Over six terms, Chris maintained a perfect 4.0 GPA across 54 credit hours earned, including courses in communications, networking, databases, web development, and project management. Chris' transcript shows consistent achievement of high grades in information technology and general education curriculum courses.
The document provides guidance on building an ideal maintenance program with four phases: 1) Planning and preparation which includes developing a coding system to organize assets, gathering machine information, and building a database. 2) Getting organized by creating shadow boards and tool crib organization. 3) Maintenance tracking and metrics such as work orders and site maps. 4) Continuous improvement through standardization, training, and enforcement of the maintenance program.
Work Sheet Aviation REMOVE AND INSTALL ANTI-COLLISION LIGHTS nurulothman5
This work sheet is intended to teach practical lesson for REMOVING AND INSTALLING ANTI-COLLISION LIGHTS . You can use this work sheet (kertas kerja) as Written Instuctional Material for those who study VOCATIONAL TRAINING OPERATION (VTO) in CIAST or in Pusat Bertauliah Kemahiran JPK (JPK approved training centre). The code for the work sheet is TP-060-3:2013 AIRCRAFT MAINTENANCE OPERATION. Competency code TP-060-3:2013-C05
AIRCRAFT ELECTRICAL SERVICING, by Akademi Era Gemilang and students. If you need more of this, drop an email to us.
Similar to Amended utm diploma_201320142_jadual_peperiksaan_akhir_with_venue_ (20)
1. DATE TIME COURSE CODE COURSE NAME PROGRAMME NO. OF STUDENTS TOTAL CLASSROOM / HALL
UDT 1022 DDG 2
DDPC 2
DDPW 57
DDPG 199 199
BLOCK C / BLOCK D
(PLEASE CHECK YOUR
NAME AT BLOCK C)
DDC 1
DDG 25
DDW 6
DDPC 1
DDPW 44
DDPG 149
DDPG 215
DDPW 43
UDB 1322
ENGLISH FOR ACADEMIC
COMMUNICATION
DDG 1 1 BLOCK C
DDPW 24
DDPG 179
DDG 133
DDW 58
DDPG 205
DDPW 46
DDSM 0013 MATEMATIK ASAS DDPG 113 113 BLOCK C
DDG 30
DDW 8
DDC 1
DDG 51
DDW 23
DDPG 4
DDPW 1
UICD 3022 TASAWWUR ISLAM DDPG 9
DDG 2183 DDG 6
DDPG 2183 DDPG 104
DDW 3263
UNDANG – UNDANG PERKONGSIAN DAN
SYARIKAT
DDW 42
DDC 3013 SISTEM MAKLUMAT PENGURUSAN DDG 83
DDPC 3013 MANAGEMENT INFORMATION SYSTEM DDPG 96
DDPW 1163
COMPUTER APPLICATION IN
ACCOUNTING
DDPW 75
DDW 3273 PERCUKAIAN II DDW 65
DDPG 67
DDPW 57
DDW 1323 PERAKAUNAN KEWANGAN II DDG 31 31 BLOCK C
DDC 2483 DDC 2
DDPC 2483 DDPC 7
DDG 39
DDW 2
DDPG 31
DDPW 33
UDP 2152 ETIKA PROFESIONAL DDG 14
DDPG 12
DDPW 8
DDPC 1
DDPG 53
DDPW 36
DDC 3223 KEJURUTERAAN PERISIAN DDC 9
DDG 18
DDW 10
DDPG 2223 DDPG 126 126 BLOCK D
DDPG 127 127 BLOCK D
DDPW 13
DDG 1423 PENGANTAR MAKROEKONOMI DDG 10
191
BLOCK C / BLOCK D
(PLEASE CHECK YOUR
NAME AT BLOCK C)
02:30 PM
7th April 2014
MONDAY
8th April 2014
TUESDAY
09:00 AM
UDT 3052
PENDIDIKAN ISLAM (TASAWWUR
ISLAM)
PERKEMBANGAN KENDIRI
UHAD 3052
ULAB 1012 ENGLISH PROFICIENCY
KOMUNIKASI PERNIAGAAN
BLOCK D
PERYATIM HALL
PERYATIM HALL
BLOCK D
UDI 3052
258
BLOCK C / BLOCK D
(PLEASE CHECK YOUR
NAME AT BLOCK C)
DDG 3183
PERKEMBANGAN DIRI
BLOCK D
UTM DIPLOMA FINAL EXAMINATION TIMETABLE SESI 2 2013/2014 (PROGRAM KERJASAMA)
UICD 1012
09:00 AM
ULAB 1022
251
02:30 PM
TABIAT ORGANISASI
ENGLISH FOR ACADEMIC STUDY
02:30 PM
09:00 AM
DDC 3153
PENGATURCARAAN ANTARAMUKA
PENGGUNA
110
DDC 1
BLOCK D
10th April 2014
THURSDAY
09:00 AM
02:30 PM
DDPW 1213
9th April 2014
WEDNESDAY
11th April 2014
FRIDAY
09:00 AM
03:00 PM
UHAS 2122
UHAD 2152 PROFESIONAL ETHICS
PEMIKIRAN KRITIS DAN KREATIF
DDG 2213
DDPG 2213
STATISTIK PERNIAGAAN
BLOCK D
BLOCK C
02:30 PM
DDPG 1423 FOUNDATION OF MACROECONOMICS
12th April 2014
SATURDAY
09:00 AM
PENGENALAN PENGURUSAN OPERASI
TITAS
ENGLISH FOR PROFESSIONAL
COMMUNICATION
ULAB 2032
BLOCK C / BLOCK D
(PLEASE CHECK YOUR
NAME AT BLOCK C)
124
BLOCK D
BLOCK C
PERYATIM HALL
61
43
179
140
124
114
BLOCK C
BLOCK C
203
UDB 2332
226
127
UHAS 1172 DINAMIKA MALAYSIA
23
DDG 2223
37
PANGKALAN DATA
FINANCIAL ACCOUNTING II
Page 1 of 3
2. DATE TIME COURSE CODE COURSE NAME PROGRAMME NO. OF STUDENTS TOTAL CLASSROOM / HALL
UTM DIPLOMA FINAL EXAMINATION TIMETABLE SESI 2 2013/2014 (PROGRAM KERJASAMA)
UDT 2032 DDG 3
DDPC 7
DDPG 43
DDPW 7
DDPC 2653 VB. NET PROGRAMMING DDPC 6
DDPW 2213 INTERMEDIATE ACCOUNTING DDPW 36
DDW 2133 PERAKAUNAN PERTENGAHAN I DDW 3
DDPW 43
DDPG 113
DDW 1313 PERAKAUNAN KEWANGAN I DDG 8
DDPC 1013 APLIKASI MIKRO KOMPUTER DDPG 295 295
PERYATIM HALL /
BLOCK C (PLEASE
CHECK YOUR NAME AT
BLOCK C)
DDPW 2223 MANAGEMENT ACCOUNTING DDPW 30
DDS 3032 MATEMATIK V DDC 7
DDG 126
DDW 4
DDG 43
DDW 2
DDPG 47
DDPW 43
DDC 3143
PENGATURCARAAN BERORIENTASIKAN
OBJEK
DDC 6
DDPC 2623
OBJECT ORIENTED PROGRAMMING
USING JAVA
DDPC 6
DDG 2193 PRINSIP PEMASARAN DDG 5
DDPW 34
DDPG 195 195
BLOCK C / BLOCK D
(PLEASE CHECK YOUR
NAME AT BLOCK C)
DDG 3253 SISTEM EKONOMI ISLAM DDG 130
DDPC 1223
ORGANISASI KOMPUTER DAN BAHASA
HIMPUNAN
DDPC 3
DDPW 2143 BUSINESS LAW DDPW 12
DDPC 2673
DATA COMMUNICATIONS &
NETWORKING
DDPC 2
DDW 3253 SISTEM KEWANGAN ISLAM DDW 17
DDG 1413 PENGANTAR MIKROEKONOMI DDG 4
DDPW 38
DDPG 165 165
BLOCK C / BLOCK D
(PLEASE CHECK YOUR
NAME AT BLOCK C)
DDPC 2423 STRUKTUR DATA DDPC 2
DDW 3293 PERAKAUNAN KEWANGAN LANJUTAN DDW 59
DDPG 52
DDPW 17
DDW 6
DDG 77
DDC 3342 KESELAMATAN KOMPUTER DDC 4
DDPW 2163 ACCOUNTING INFORMATION SYSTEMS DDPW 15
DDPG 16
DDPW 2
DDW 2283 PERAKAUNAN BERKOMPUTER DDW 3
DDPJ 1503 TECHNICAL DRAWING DDPG 91
DDJ 1503 LUKISAN KEJURUTERAAN DDG 27
DDG 3233 PENGURUSAN SUMBER MANUSIA DDG 138 138 BLOCK D
DDPC 2663 OPERATING SYSTEM DDPC 5
DDPW 2253 TAXATION DDPW 28
DDW 3173 PERCUKAIAN I DDW 10
135
BLOCK D
FINANCIAL ACCOUNTING IDDPW 1113
UICD 2022
INSTITUSI-INSTITUSI ISLAM
13th April 2014
SUNDAY
02:30 PM
14th April 2014
MONDAY
09:00 AM
DDW 2243 PERAKAUNAN PENGURUSAN
DDPG 1113
02:30 PM MATEMATIK PERNIAGAAN
02:30 PM
DDG 1113
09:00 AM 60
130
BLOCK C
BLOCK C
BLOCK C
37
121
09:00 AM
51 BLOCK C
DDPG 1413 FOUNDATION OF MICROECONOMICS
15th April 2014
TUESDAY
61 BLOCK C
DDPG 1293 PRINCIPLES OF MARKETING
DDW 2253 PENGENALAN KEWANGAN
17th April 2014
THURSDAY
09:00 AM
02:30 PM
16th April 2014
WEDNESDAY
09:00 AM
40 BLOCK C
DDSA 0053 PRINSIP PERAKAUNAN
118
(LAB BLOCK B) B101L /
B102L / B104 L / B105 L
(PLEASE CHECK YOUR
NAME AT B101L)
BLOCK C
02.30 PM
DDPW 2133 INTRODUCTION TO FINANCE
BLOCK D
88
BLOCK D
BLOCK D
145 BLOCK D
83 BLOCK C
43
130
Page 2 of 3
3. DATE TIME COURSE CODE COURSE NAME PROGRAMME NO. OF STUDENTS TOTAL CLASSROOM / HALL
UTM DIPLOMA FINAL EXAMINATION TIMETABLE SESI 2 2013/2014 (PROGRAM KERJASAMA)
DDPG 1123 PENGENALAN PERNIAGAAN DDPG 197 197
BLOCK C / BLOCK D
(PLEASE CHECK YOUR
NAME AT BLOCK C)
DDW 3183 AUDIT DDW 22
DDG 2283 PEMASARAN PERNIAGAAN DDG 26
DDPZ 2643 WEB PROGRAMMING II DDPC 6
DDZ 3123
PEMBANGUNAN APLIKASI BERASASKAN
WEB II
DDC 6
DDJ 3193
PERANCANGAN DAN KAWALAN
PENGELUARAN
DDG 95
DDC 3332
PEMASANGAN DAN SELENGGARAAN
SISTEM KOMPUTER
DDC 8
DDPC 2333
COMPUTER HARDWARE MANAGEMENT
AND MAINTAINANCE
DDPC 6
DDPG 17
DDPW 1
DDJ 3003 PROSES PEMBUATAN DDG 58
DDPC 2453
KAEDAH ANALISA DAN REKABENTUK
SISTEM
DDPC 5
DDPW 2123 COST ACCOUNTING DDPW 16
DDW 2163 PERAKAUNAN KOS DDW 3
DDPJ 2733 MANUFACTURING PROCESS DDPG 101 101 BLOCK C
DDPG 2273 DDPG 97
DDG 2273 DDG 5
DDW 3153 PERAKAUNAN PERTENGAHAN II DDW 30
DDPZ 2612 WEB PROGRAMMING I DDPC 3
DDZ 2122
PEMBANGUNAN APLIKASI BERASASKAN
WEB I
DDC 1
09:00 AM DDG 2413 EKONOMI PERTENGAHAN DDG 40 40 BLOCK D
DDG 3173 UNDANG-UNDANG PERDAGANGAN DDG 65
DDS 2032 MATEMATIK III DDC 1
DDPW 58
DDPG 206 206 PERYATIM HALL
Please Take Note of the Slight Changes of the Highlighted Date for DDPJ 2733
09:00 AM
18th April 2014
FRIDAY
136
DDSE 0063
BLOCK D
20th April 2014
SUNDAY 02:30 PM
PRINSIP EKONOMI
BLOCK D
19th April 2014
SATURDAY
02:30 PM
TEKNOLOGI DAN PERNIAGAAN
82
03:00 PM
09:00 AM
DDPG 1223 PRINSIP PENGURUSAN
NOTE: PLEASE CHECK THE NOTICE BOARD FREQUENTLY FOR ANY AMENDMENT.
60 BLOCK C
124 BLOCK D
BLOCK D127
Page 3 of 3