The document outlines a 15-minute headlight repair process involving two steps - sanding and polishing. It details using various Norton sanding and polishing products to sand and polish the headlight surface, including dry sanding with P500 and P800 grit paper, wet sanding with 1500 and 3000 grit discs, and polishing with Liquid Ice Quick Cut and OEM polishes. The process aims to restore headlights through progressively finer grits and polishes, wiping the surface clean between each step.
1. www.norton.eu
Saint-Gobain Abrasives
Rue de l’Ambassadeur,
78702 Conflans Cedex,
France
www.norton.eu
Saint-Gobain Abrasives
Rue de l’Ambassadeur,
78702 Conflans Cedex,
France
HEADLIGHT REPAIR PROCESS
TIME FOR REPAIR: 15 MINUTES (NOT INCLUDING MOUNTING/ASSEMBLY)
STEP 1 SANDING STEP 2 POLISHING
DRY SAND WITH
NORTON PRO A275 P500
+SOFT INTERFACE
DRY SAND WITH
NORTON PRO A275 P800
+SOFT INTERFACE
WIPE WITH
BLUE MAGNET
MICROFIBRE CLOTH
WET SAND WITH
NORTON ICE
1500 GRIT DISC
WET SAND WITH
NORTON ICE
3000 GRIT DISC
CLEAN THE SURFACE
WITH BLUE MAGNET
MICROFIBRE CLOTH
POLISH WITH
LIQUID ICE Step 1 - QUICK CUT
AND WHITE FOAM HEAD
WIPE THE SURFACE
WITH BLUE MAGNET
MICROFIBRE CLOTH
POLISH WITH
LIQUID ICE Step 2 - OEM
AND BLACK FOAM HEAD
WIPE THE SURFACE
WITH BLUE MAGNET
MICROFIBRE CLOTH
CLEAN UP WITH LIQUID ICE
DETAILER SPRAY
WIPE WITH
BLUE MAGNET
MICROFIBRE CLOTH
Norton_ICE_Headlight_repair_A4_pos_2016_HR.indd 1 22/02/16 16:53