The AIMEX III machine has 130 feeder slots and can handle single or dual conveyor panel sizes from 48 x 48 mm to 1,068 x 710 mm. It supports various chip shooters including H24S, DX, V12, H08M, H02F, H01, and OF. Throughput depends on the chip shooter and number of robots, ranging from 5,800 to 80,000 components per hour. Placement accuracy varies between chip shooters but is at least ±0.025 mm. It sources parts from tape feeders, stick feeders, trays and other units, and runs on 3-phase 200-230V power and compressed air.

1. www.smt11.com
www.etasmt.com
Tel: +86 0755 2742 8080
Fax:+86 0755 2742 8090
Web: www.smt11.com
AIMEX III Specifications
Machine AIMEX III
Feeder slot quantity 130
Panel size Single conveyor 48 x 48 to 1,068 x 710 mm
*1
(L x W) Double
Single conveyance 48 x 48 to 1,068 x 610 mm
conveyor
Dual conveyance 48 x 48 to 1,068 x 330 mm
Heads H24S, DX, V12, H08M(Q), H02F, H01, OF
Throughput 1 robot 2 robots
H24S Standard mode 35,000 cph (H24S x 1) 70,000 cph (H24S x 2)
Productivity priority
40,000 cph (H24S x 1) 80,000 cph (H24S x 2)
mode
DX 27,000 cph (12 nozzles) 54,000 cph (12 nozzles)
12,000 cph (4 nozzles) 24,000 cph (4 nozzles)
5,800 cph (1 nozzle) 11,600 cph (1 nozzle)
V12 26,000 cph (V12 x 1) 52,000 cph (V12 x 2)
H08M Standard mode 13,000 cph (H08M x 1) 26,000 cph (H08M x 2)
Productivity priority
14,000 cph (H08M x 1) 28,000 cph (H08M x 2)
mode
Placing H24S ±0.025 mm Cpk ≥ 1.00
accuracy
V12 ±0.038 mm Cpk ≥ 1.00
H08M ±0.040 mm Cpk ≥ 1.00
H02F ±0.025 mm Cpk ≥ 1.00
Part supply units Tape feeders, stick feeders, tray units, others
Power source 3-phase 200 to 230 V ± 10 % (50/60 Hz)
Air 0.5 MPa (ANR)
*1 Support for panels up to 1,500 x 710 mm is available as an option.

2. www.smt11.com
www.etasmt.com