9082-004 - Rev A
•
1 like•156 views
Rudnev is a division of Southey Holdings that designs, manufactures, and installs insulated panels for controlled environments like cold rooms, freezer rooms, and clean rooms. The document provides 11 technical details for insulation installation, including wall-to-ceiling and wall-to-wall joints, roof supports, and door sill sections. It was created by Rudnev for an insulation project at a Finlar Foods facility.
Report
Share
Report
Share
Download to read offline
Recommended
9080-006 - Rev B
This document provides 11 insulation installation details for a massmart meat production facility project. The details show various wall, ceiling, and roof joint configurations including steps joints, mitred corners, and thermal breaks. It also specifies waterproofing, vapor barriers, and an underfloor sacrificial layer.
9082-002 - Rev A
This document provides information about Rudnev, a division of Southey Holdings that designs, manufactures, and installs insulated panels. It includes Rudnev's contact information and address in Pinetown, South Africa. The document also contains engineering drawings for the insulation installation plan at the floor level of a project for Finlar Foods, including scale, approval information, and a copyright notice.
9082-005 - Rev A
This document provides information about Rudnev, a division of Southey Holdings that designs, manufactures, and installs insulated panels. It includes contact information for Rudnev as well as engineering drawings showing insulation installation sections for various projects undertaken by Edilcon Construction for Finlar Foods facilities in Kyalavani. The drawings provide details on insulation layout and are copyright protected documents of Southey Holdings.
9080-005 - Rev A
This document provides insulation installation details for a massmart meat production facility project. It includes 4 section drawings at a scale of 1:125 showing insulation installation sections A-A, B-B, C-C, and D-D. The content is confidential and requires authorization from Southey Holdings Pty Ltd to disclose or reproduce. The drawings are based on engineering drawings from WSP and Ferro Eleganza.
9080-001 - Rev B
Rudnev is a division of Southey Holdings that designs, manufactures, and installs insulated panels for controlled environments like cold rooms, freezer rooms, and clean rooms. The document is an engineering drawing showing the insulation installation plan at the floor level for the Massmart Meat Production Facility project. It includes scale, technical details, revision details and notes that the content is confidential and copyright of Southey Holdings.
SFW 3-17-16
This document contains engineering drawings and part specifications for various components of an equipment assembly. It includes 6 numbered drawings showing dimensions and views of individual parts, including a large hydraulic ring, small hydraulic ring, pulley wheel, boom pivot pin, main winch pipe, and guy winch pipe. Each drawing lists the part number, description, material, and quantity needed. The title block at the bottom of each sheet provides identifying information such as the company name and address, designer's name, date, and scale.
SLIBRING PROTECTOR
This document appears to be a technical drawing, as it contains labels like "ISOMETRIC VIEW" and references to a "Gulf Technical Factory". The drawing includes various labels with letters and numbers, and at the bottom lists information like a project code, date, and numbers that may correspond to different parts of the drawing.
CONVEYOR SHIELD
The document appears to be a technical report from Gulf Technical Factory (GTF) regarding a conveyor shield. It was authored by Syed I B and Eliyas on March 29, 2015. The report number is GTF-03-509 and contains information on bending radius.
Recommended
9080-006 - Rev B
This document provides 11 insulation installation details for a massmart meat production facility project. The details show various wall, ceiling, and roof joint configurations including steps joints, mitred corners, and thermal breaks. It also specifies waterproofing, vapor barriers, and an underfloor sacrificial layer.
9082-002 - Rev A
This document provides information about Rudnev, a division of Southey Holdings that designs, manufactures, and installs insulated panels. It includes Rudnev's contact information and address in Pinetown, South Africa. The document also contains engineering drawings for the insulation installation plan at the floor level of a project for Finlar Foods, including scale, approval information, and a copyright notice.
9082-005 - Rev A
This document provides information about Rudnev, a division of Southey Holdings that designs, manufactures, and installs insulated panels. It includes contact information for Rudnev as well as engineering drawings showing insulation installation sections for various projects undertaken by Edilcon Construction for Finlar Foods facilities in Kyalavani. The drawings provide details on insulation layout and are copyright protected documents of Southey Holdings.
9080-005 - Rev A
This document provides insulation installation details for a massmart meat production facility project. It includes 4 section drawings at a scale of 1:125 showing insulation installation sections A-A, B-B, C-C, and D-D. The content is confidential and requires authorization from Southey Holdings Pty Ltd to disclose or reproduce. The drawings are based on engineering drawings from WSP and Ferro Eleganza.
9080-001 - Rev B
Rudnev is a division of Southey Holdings that designs, manufactures, and installs insulated panels for controlled environments like cold rooms, freezer rooms, and clean rooms. The document is an engineering drawing showing the insulation installation plan at the floor level for the Massmart Meat Production Facility project. It includes scale, technical details, revision details and notes that the content is confidential and copyright of Southey Holdings.
SFW 3-17-16
This document contains engineering drawings and part specifications for various components of an equipment assembly. It includes 6 numbered drawings showing dimensions and views of individual parts, including a large hydraulic ring, small hydraulic ring, pulley wheel, boom pivot pin, main winch pipe, and guy winch pipe. Each drawing lists the part number, description, material, and quantity needed. The title block at the bottom of each sheet provides identifying information such as the company name and address, designer's name, date, and scale.
SLIBRING PROTECTOR
This document appears to be a technical drawing, as it contains labels like "ISOMETRIC VIEW" and references to a "Gulf Technical Factory". The drawing includes various labels with letters and numbers, and at the bottom lists information like a project code, date, and numbers that may correspond to different parts of the drawing.
CONVEYOR SHIELD
The document appears to be a technical report from Gulf Technical Factory (GTF) regarding a conveyor shield. It was authored by Syed I B and Eliyas on March 29, 2015. The report number is GTF-03-509 and contains information on bending radius.
Lynca Meats - Pork Factory - Meyerton - Details 02
The document contains details and specifications for insulation installation for a new freezer store, including:
- Details for a door threshold, airlock, and horizontal sliding door dimensions.
- Specifications for 15dv polystyrene insulated panels with 0.55mm thick metal skins for walls, ceilings, and doors.
- Dimensions for freezer rooms, walls, ceilings, and other structural elements.
- Joint details for ceiling to wall connections, with and without steps, and wall to wall joints.
- References to additional drawing details.
Lynca Meats - Pork Factory - Meyerton - Details 01
The document provides details on the construction and installation of insulation panels for a freezer, including 9 numbered details. It specifies materials like M8 stainless steel hook bolts, 0.8mm thick metal flashing, and polystyrene and EPS insulation panels. Fixing details are given for wall corners, wall joints, floors, doors, and roof supports.
Biltong SA - Centurion - Details 02
This document provides details for the construction of a restaurant chiller and drying room 1, including dimensions and materials for walls, ceilings, and insulation panels. It lists the thicknesses of insulation used on the ceiling and upstand panels of both rooms. Aluminum angles and metal flashing are specified to connect the ceiling and wall panels between the rooms.
Biltong SA - Centurion - Details 01
The document contains details and specifications for installing insulation panels for walls, ceilings, and doors of a cold storage facility. It includes dimensions and materials for joints between wall and ceiling panels, wall and wall panels, and provides fixing details for items like chillers, doors, and roof supports. Dimensions noted are for panel thicknesses, flashing, angles, and spacing of fixings. Materials listed include metal panels, insulation, butyl sealants, foam strips, and flashing.
Biltong SA - Centurion - Sections
The document contains details of rooms for a meat processing facility including dimensions and references to additional drawings. It lists various areas for processing meat including large freezers, chillers, drying rooms, washing areas, smoking areas, and storage rooms. Many of the rooms have internal heights between 3 and 4 meters. The document also contains labeling for wall sections and roof supports that refer to separate drawing numbers for more details.
Biltong SA - Centurion - Plan @ Floor Level
This document contains a floor plan layout for a meat processing facility. It lists various processing, storage, and support areas of the facility along with their internal heights. These include areas for biltong preparation, drying rooms, curing, washing, smoking, processing, portioning, freezing, and loading bays. Door specifications are provided for access between the different areas.
Mauritius Freeport Development
The document provides details for the construction of a freezer including dimensions for walls, panels, supports, and other structural elements. Measurements are given for wall thicknesses, ceiling heights, panel spacings, and other construction specifications. Details are also shown for the roof support system, insulation, vapor barriers, flooring system, and door thresholds.
Lynca Meats - Pork Factory - Meyerton - Sections
The document contains plans and specifications for insulation installation at a new freezer store. It details new 250mm and 200mm thick insulation panels with fire retardant polystyrene cores and painted metal skins for walls and ceilings. It also specifies support steel, freezer floors, vertical lift doors for blast freezers, horizontal sliding doors, and panel fixing details. The plans show layouts for the new freezer store, loading bays, and staging area.
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 02
The document is a site plan for installing insulation at a blast freezer area. It shows the layout of new blast freezers, staging areas, doors, and insulation panels. Key aspects include installing 200mm thick insulation panels on the blast freezers and airlock, and referencing other drawings for structural details, insulation details, and an overall floor plan layout.
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 01
This document contains plans and specifications for insulation installation at a new freezer store. It includes details of new freezer pods and blast freezers being added, with dimensions and specifications for insulation panels of various thicknesses. Reference drawings are provided for insulation installation details, structural elements, and refrigeration layout. The plan provides specifications for insulating walls, floors, ceilings and openings of the new and existing structures to the required standards for the freezer environment.
De-humidifier for Nestle
The document contains technical specifications and details for the construction of an insulated panel structure, including dimensions of various structural components like panels, beams, channels. It lists panel thicknesses and materials, door sizes and components. It also includes notes specifying panel core materials, door frame dimensions and materials, and sealants to be used. Plans and elevations provide more details on the structure design and assembly.
More Related Content
More from Trevain Bechan
Lynca Meats - Pork Factory - Meyerton - Details 02
The document contains details and specifications for insulation installation for a new freezer store, including:
- Details for a door threshold, airlock, and horizontal sliding door dimensions.
- Specifications for 15dv polystyrene insulated panels with 0.55mm thick metal skins for walls, ceilings, and doors.
- Dimensions for freezer rooms, walls, ceilings, and other structural elements.
- Joint details for ceiling to wall connections, with and without steps, and wall to wall joints.
- References to additional drawing details.
Lynca Meats - Pork Factory - Meyerton - Details 01
The document provides details on the construction and installation of insulation panels for a freezer, including 9 numbered details. It specifies materials like M8 stainless steel hook bolts, 0.8mm thick metal flashing, and polystyrene and EPS insulation panels. Fixing details are given for wall corners, wall joints, floors, doors, and roof supports.
Biltong SA - Centurion - Details 02
This document provides details for the construction of a restaurant chiller and drying room 1, including dimensions and materials for walls, ceilings, and insulation panels. It lists the thicknesses of insulation used on the ceiling and upstand panels of both rooms. Aluminum angles and metal flashing are specified to connect the ceiling and wall panels between the rooms.
Biltong SA - Centurion - Details 01
The document contains details and specifications for installing insulation panels for walls, ceilings, and doors of a cold storage facility. It includes dimensions and materials for joints between wall and ceiling panels, wall and wall panels, and provides fixing details for items like chillers, doors, and roof supports. Dimensions noted are for panel thicknesses, flashing, angles, and spacing of fixings. Materials listed include metal panels, insulation, butyl sealants, foam strips, and flashing.
Biltong SA - Centurion - Sections
The document contains details of rooms for a meat processing facility including dimensions and references to additional drawings. It lists various areas for processing meat including large freezers, chillers, drying rooms, washing areas, smoking areas, and storage rooms. Many of the rooms have internal heights between 3 and 4 meters. The document also contains labeling for wall sections and roof supports that refer to separate drawing numbers for more details.
Biltong SA - Centurion - Plan @ Floor Level
This document contains a floor plan layout for a meat processing facility. It lists various processing, storage, and support areas of the facility along with their internal heights. These include areas for biltong preparation, drying rooms, curing, washing, smoking, processing, portioning, freezing, and loading bays. Door specifications are provided for access between the different areas.
Mauritius Freeport Development
The document provides details for the construction of a freezer including dimensions for walls, panels, supports, and other structural elements. Measurements are given for wall thicknesses, ceiling heights, panel spacings, and other construction specifications. Details are also shown for the roof support system, insulation, vapor barriers, flooring system, and door thresholds.
Lynca Meats - Pork Factory - Meyerton - Sections
The document contains plans and specifications for insulation installation at a new freezer store. It details new 250mm and 200mm thick insulation panels with fire retardant polystyrene cores and painted metal skins for walls and ceilings. It also specifies support steel, freezer floors, vertical lift doors for blast freezers, horizontal sliding doors, and panel fixing details. The plans show layouts for the new freezer store, loading bays, and staging area.
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 02
The document is a site plan for installing insulation at a blast freezer area. It shows the layout of new blast freezers, staging areas, doors, and insulation panels. Key aspects include installing 200mm thick insulation panels on the blast freezers and airlock, and referencing other drawings for structural details, insulation details, and an overall floor plan layout.
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 01
This document contains plans and specifications for insulation installation at a new freezer store. It includes details of new freezer pods and blast freezers being added, with dimensions and specifications for insulation panels of various thicknesses. Reference drawings are provided for insulation installation details, structural elements, and refrigeration layout. The plan provides specifications for insulating walls, floors, ceilings and openings of the new and existing structures to the required standards for the freezer environment.
De-humidifier for Nestle
The document contains technical specifications and details for the construction of an insulated panel structure, including dimensions of various structural components like panels, beams, channels. It lists panel thicknesses and materials, door sizes and components. It also includes notes specifying panel core materials, door frame dimensions and materials, and sealants to be used. Plans and elevations provide more details on the structure design and assembly.
More from Trevain Bechan (11)
Lynca Meats - Pork Factory - Meyerton - Details 02
Lynca Meats - Pork Factory - Meyerton - Details 02
Lynca Meats - Pork Factory - Meyerton - Details 01
Lynca Meats - Pork Factory - Meyerton - Details 01
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 02
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 02
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 01
Lynca Meats - Pork Factory - Meyerton - Plan @ Floor Level 01
9082-004 - Rev A
- 1. RUDNEVRUDNEVa division of Southey Holdings Pty Ltd 31 Gillits Road - Westmead - Pinetown P.O. Box 10634 - Ashwood Tel.: (031) 709 0130/1/2 Fax.: (031) 709 2149 REG No.: 2012/204464/07 Design, manufacture and installation of insulated panels for controlled environments - Cold rooms, Freezer rooms, Clean rooms and Factory insulated structures. Scale at A1: AS SHOWN Dm: Designed: Approved: Checked: Tech Chk: Det Chk: Date: TB ZMG Drawing Title: INSULATION INSTALLATION TYPICAL DETAILS EDILCON CONSTRUCTION (FINLAR FOODS) Project Number: Drawing Number: Revision: By Chk Date SuffixRevision Details: JHB0683 9082-004 DETAIL 1 WALL TO CEILING JOINT (WITH STEP-JOINT) (NTS) 14/11/2016 Issued for enquiry TB 14/11/2016 A A COPYRIGHT RESERVEDC The content of this document is privileged and confidential and may not be disclosed or reproduced without the express authorisation of the author, being "SOUTHEY HOLDINGS (PTY) LTD" DETAIL 2 WALL TO CEILING JOINT (WITHOUT STEP-JOINT) (NTS) DETAIL 3 CEILING TO WALL ANNEX JOINT (NTS) DETAIL 4 CEILING TO WALL ANNEX JOINT (NTS) DETAIL 5 WALL TO WALL JOINT (INTERMEDIATE) (NTS) DETAIL 6 WALL TO WALL CORNER JOINT (MITRED) (NTS) DETAIL 7 WALL TO CORNER ANNEX JOINT (MITRED) (NTS) DETAIL 8 TEE BAR ROOF SUPPORT (NTS) DETAIL 9 TYPICAL BASE FIXING DETAIL FOR CHILLERS & AMBIENT TEMP ROOMS (NTS) DETAIL 10 SECTION THROUGH FREEZER DOOR SILL (NTS) DETAIL 11 INTERMEDIATE ROOF SUPPORT (NTS) DB