397 gearturbine documento
•Download as DOCX, PDF•
0 likes•172 views
Novel Rotary-Turbo-InFlow Technology / Featured Development GEARTURBINE PROJECT Have the similar simple basic system of the Aelopilie Heron Steam device from Alexandria 10-70 AD * Atypical New GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses http://www.youtube.com/watch?v=0cPo9Lf44TE 8X/Y Thermodynamic CYCLE Way Steps Pat Dic. 1991 IMPI Mexico 197187
Report
Share
Report
Share
Recommended
950 Gearturbine Project documento
State of the art / Novel Rotary-Turbo-InFlow Tech / Featured Development - GEARTURBINE PROJECT Have the similar basic system of the Aeolipile Heron Steam Turbine device from Alexandria 10-70 AD * With Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses *8X/Y Thermodynamic CYCLE Way Steps. Higher efficient percent. No blade erosion by sand & very low heat target signature Pat:197187IMPI MX Dic1991 Atypical Motor Engine Type
460 Gearturbine State of the Art Rotary-Turbo-InFlow Novel Tech
This document describes a new rotary-turbo-inflow technology featuring retrodynamic dextrorpm versus levorinflow thrust. It utilizes an 8x/y thermodynamic cycle way that is more efficient with no blade erosion or high heat signature. The technology is patented and represents an atypical motor engine type.
700 gearturbine project (rotary turbo-in flow) documento
*Gearturbine/State of the art Innovative InFlow-Turbo-Rotary Top system
Have similar simple basic system of the Aelopilie Heron Steam Turbine device at Alexandria 10-70 AD
*Atypical New GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
8X/Y Thermodynamic CYCLE Way Steps
With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect RotorRPM VS InFlow CollisionInteraction Type
Mechanical direct 2 Small Planetary Gears like Ying Yang Simbol
-Shape-Mass + Rotary-Motion = Inertia-Dynamic
-Non-waste parasitic looses system for cooling, lubrication & combustion
-2 Planetary Gears -4 TURBOS
Pat: Dic. 1991 IMPI Mexico #197187 Carlos Barrera, All Rights Reserved.
State of the Art Novel InFlowTech; 1-Gearturbine RotaryTurbo, 2-Imploturbocom...
The document describes two state-of-the-art technologies: 1) The Gearturbine, a novel rotary turbo engine that uses retrodynamic inflow and an 8X/Y thermodynamic cycle for higher efficiency. It has 4 turbos and is more resistant to erosion. 2) The Imploturbocompressor, a system with one moving part that uses implosion to compress air in a simple circular motion similar to a hurricane. It has no blade erosion and a very low heat signature.
Gearturbine project thin text documento
GEARTURBINE PROJECT
Atypical InFlow Thermodynamic Technology Submission
Innovative New ROTARY Turbine Fueled Engine Type
* The Gearturbine comes from the conpemporary ecological global needs of very efficient power plant fueled motor engine.
-Power thrust by barr (tube); air, sea, land and power generation, work aplication.
-With the same simple basic system of the "Aelopilie" Heron´s Steam Turbine device from Alexandria 1900 years ago.
http://gearturbine.260mb.com
YouTube Video; Atypical New * GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
http://www.youtube.com/watch?v=0cPo9Lf44TE
*8-X/Y CYCLE - Way Steps:
1)Compression
2)turbo 1 cold
3)turbo 2 cold
4)combustion - circular flames / ying yang
5)thrust - single turbo & planetary gears / opposite
6)turbo 2 hot
7)turbo1 hot
8)turbine
-Gearturbine, atypical fueled turbine engine, state of the art. New thermodynamic technology.
-With Retrodynamic dextrogiro vs levogiro effect.
-Wide cilindrical shape - More lever.
-Non waste parasitic looses system for; cooling, lubrication & combustion.
-2 Two very long captive compression inflow propulsion conduits.
-Inside 4 turbos pairs.
-2 Two planetary gears inside in a bigger shell. / Big torque.
-3 stages of inflow turbo compression before combustion.
*The most efficient power plant engine project today. Very high % porcent efficient.
Patent; Dic 1991 IMPI Mexico #197187
Carlos Barrera. Inventor and project owner.
All Rights Reserved. Monterrey Mexico.
No vengo a ver si puedo, sino porque puedo vengo.
شهادة_0001
This certificate from the Saudi Binladen Group certifies that Fathy Abdulrashid Ali Koura has worked as a Project Manager in Operations and Maintenance for the Saudi Service Company Limited branch assigned to the Ministry of Interior - Central Security Building Dammam project in KSA from June 15, 2013 to present. It states he is responsible for the operation and maintenance of all electrical equipment and has excellent communication skills, is motivated, supports work under pressure, is a very good leader and is productive and organized.
Cmpe295 a career-plan-for-life-long-learning.spring.2012-ce
This document provides instructions for Assignment #1 for the course CMPE295A Computer Engineering Program at San Jose State University. Students must write a report of at least two pages discussing their understanding of lifelong learning, experiences with lifelong learning, and career plan for the next 3-5 years. The report should include definitions of lifelong learning, its importance, their attitude toward it, and how they plan to achieve lifelong learning goals. It should also describe experiences learning outside of campus and lessons learned. The report is due March 15, 2012.
Recommended
950 Gearturbine Project documento
State of the art / Novel Rotary-Turbo-InFlow Tech / Featured Development - GEARTURBINE PROJECT Have the similar basic system of the Aeolipile Heron Steam Turbine device from Alexandria 10-70 AD * With Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses *8X/Y Thermodynamic CYCLE Way Steps. Higher efficient percent. No blade erosion by sand & very low heat target signature Pat:197187IMPI MX Dic1991 Atypical Motor Engine Type
460 Gearturbine State of the Art Rotary-Turbo-InFlow Novel Tech
This document describes a new rotary-turbo-inflow technology featuring retrodynamic dextrorpm versus levorinflow thrust. It utilizes an 8x/y thermodynamic cycle way that is more efficient with no blade erosion or high heat signature. The technology is patented and represents an atypical motor engine type.
700 gearturbine project (rotary turbo-in flow) documento
*Gearturbine/State of the art Innovative InFlow-Turbo-Rotary Top system
Have similar simple basic system of the Aelopilie Heron Steam Turbine device at Alexandria 10-70 AD
*Atypical New GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
8X/Y Thermodynamic CYCLE Way Steps
With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect RotorRPM VS InFlow CollisionInteraction Type
Mechanical direct 2 Small Planetary Gears like Ying Yang Simbol
-Shape-Mass + Rotary-Motion = Inertia-Dynamic
-Non-waste parasitic looses system for cooling, lubrication & combustion
-2 Planetary Gears -4 TURBOS
Pat: Dic. 1991 IMPI Mexico #197187 Carlos Barrera, All Rights Reserved.
State of the Art Novel InFlowTech; 1-Gearturbine RotaryTurbo, 2-Imploturbocom...
The document describes two state-of-the-art technologies: 1) The Gearturbine, a novel rotary turbo engine that uses retrodynamic inflow and an 8X/Y thermodynamic cycle for higher efficiency. It has 4 turbos and is more resistant to erosion. 2) The Imploturbocompressor, a system with one moving part that uses implosion to compress air in a simple circular motion similar to a hurricane. It has no blade erosion and a very low heat signature.
Gearturbine project thin text documento
GEARTURBINE PROJECT
Atypical InFlow Thermodynamic Technology Submission
Innovative New ROTARY Turbine Fueled Engine Type
* The Gearturbine comes from the conpemporary ecological global needs of very efficient power plant fueled motor engine.
-Power thrust by barr (tube); air, sea, land and power generation, work aplication.
-With the same simple basic system of the "Aelopilie" Heron´s Steam Turbine device from Alexandria 1900 years ago.
http://gearturbine.260mb.com
YouTube Video; Atypical New * GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
http://www.youtube.com/watch?v=0cPo9Lf44TE
*8-X/Y CYCLE - Way Steps:
1)Compression
2)turbo 1 cold
3)turbo 2 cold
4)combustion - circular flames / ying yang
5)thrust - single turbo & planetary gears / opposite
6)turbo 2 hot
7)turbo1 hot
8)turbine
-Gearturbine, atypical fueled turbine engine, state of the art. New thermodynamic technology.
-With Retrodynamic dextrogiro vs levogiro effect.
-Wide cilindrical shape - More lever.
-Non waste parasitic looses system for; cooling, lubrication & combustion.
-2 Two very long captive compression inflow propulsion conduits.
-Inside 4 turbos pairs.
-2 Two planetary gears inside in a bigger shell. / Big torque.
-3 stages of inflow turbo compression before combustion.
*The most efficient power plant engine project today. Very high % porcent efficient.
Patent; Dic 1991 IMPI Mexico #197187
Carlos Barrera. Inventor and project owner.
All Rights Reserved. Monterrey Mexico.
No vengo a ver si puedo, sino porque puedo vengo.
شهادة_0001
This certificate from the Saudi Binladen Group certifies that Fathy Abdulrashid Ali Koura has worked as a Project Manager in Operations and Maintenance for the Saudi Service Company Limited branch assigned to the Ministry of Interior - Central Security Building Dammam project in KSA from June 15, 2013 to present. It states he is responsible for the operation and maintenance of all electrical equipment and has excellent communication skills, is motivated, supports work under pressure, is a very good leader and is productive and organized.
Cmpe295 a career-plan-for-life-long-learning.spring.2012-ce
This document provides instructions for Assignment #1 for the course CMPE295A Computer Engineering Program at San Jose State University. Students must write a report of at least two pages discussing their understanding of lifelong learning, experiences with lifelong learning, and career plan for the next 3-5 years. The report should include definitions of lifelong learning, its importance, their attitude toward it, and how they plan to achieve lifelong learning goals. It should also describe experiences learning outside of campus and lessons learned. The report is due March 15, 2012.
Refusing to Conform_ Arizona becomes the 10th State to Reject Common Core
The Arizona State Board of Education voted to remove Arizona from Common Core, making it the 10th state to reject the controversial education reforms. While this rejects Common Core standards, the existing standards remain for now until new ones are developed. Activism is still needed to push for localized, state-created standards. Supporters are thanked for their work against Common Core and urged to continue advocating for educational choice free from federal overreach.
resume new n
Nicole Genaw has experience in healthcare, education, and customer service. She has a bachelor's degree in human services and an associate degree in liberal arts. Her professional experience includes internships in foster care advocacy and positions as a hostess, teacher, and waitress where she was responsible for tasks like food service, cleaning, documentation, and evaluating children's development.
Digital sandbox imovie
The document provides resources for an event about tapping into one's creative side using the iPad and multimedia. It lists tutorial and example videos that will be shown including tutorials for iMovie and several short videos created by students and teachers on topics like everyday moments, thanksgiving, and spending time with family. The resources are meant to inspire administrators attending a workshop about digital creativity.
CompTIA A+ certificate
This document is a CompTIA certification for Frank Bryan Navarro with the number COMP001020880703 and an expiration date of July 27, 2018. It has a verification code of Y49SLFT3DDB15F65 that can be checked online at http://verify.CompTIA.org.
3 esporte pg 02
O documento lista os jogos das oitavas de final da Copa Libertadores da América de 2012 e da Copa do Brasil de 2012. Na Libertadores, os jogos de ida das oitavas de final ocorreram entre os dias 25 de abril e 3 de maio e os jogos de volta entre os dias 9 e 10 de maio. Na Copa do Brasil, as oitavas de final ocorreram entre os dias 25 de abril e 10 de maio em diferentes estádios brasileiros.
Decreto 2085 2002
Este decreto establece las regulaciones para obtener registro sanitario de nuevas entidades químicas en medicamentos en Colombia. Define una nueva entidad química como un principio activo no incluido previamente en normas farmacológicas colombianas. Protege el uso de información no divulgada presentada para la aprobación de una nueva entidad química por períodos de 3 a 5 años dependiendo de la fecha de presentación de la solicitud. Exime la protección en casos donde el titular del registro autorice el uso de la información, la
Matematicas
El documento presenta una serie de operaciones matemáticas con matrices y vectores. Se definen varias matrices A, B, C, D, Z, W y V y se pide realizar operaciones como sumas, multiplicaciones y determinantes utilizando valores específicos para las variables x, y y z. Finalmente, se solicita hallar la transpuesta de algunas matrices para determinar si son simétricas.
Maryuri
La hoja de registro pertenece a Maryuri Lisset Ovaco Medina, una estudiante del primer semestre de Enfermería en la Universidad Técnica de Machala, Ecuador.
Ave noturna
Este documento relata observações de duas espécies de aves noturnas, Pulsatrix koeniswaldiana e Nyctibius grandis, em uma área urbana na cidade de Ipanema, Minas Gerais, Brasil. As aves foram avistadas pousadas em postes de iluminação, possivelmente atraídas pelos insetos ao redor das lâmpadas. Essas observações sugerem que as aves podem se alimentar em ambientes urbanos, apesar de seus hábitats típicos serem florestas.
State of the Art · Novel Rotary-Turbo-InFlow Tech - Featured Development / GE...
·1- GEARTURBINE PROJECT
-
New Form-Function Motor-Engine Device
State of the art.
-Innovative Thermodynamic concept Top system
.
-Have the similar simple basic system of the "Aelopilie" Heron´s Steam Turbine device from Alexandria 10-70 AD.
* Atypical New GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
*8X/Y Thermodynamic CYCLE Way Steps
.
-With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect Rotor-RPM VS InFlow CollisionInteraction Type
.
-Shape-Mass + Rotary-Motion = Inertia-Dynamic.
-
Non-waste parasitic looses system for cooling, lubrication & combustion
.
-Combustion 2Two InsideRotaryDynamic continue circular Rockets flames
4 TURBOS insiderotaryactive
.
-Mechanical direct 2two Small Planetary Gears like Ying Yang Simbol.
-No blade erosion by sand & very low heat target signature.
*Patent; Dic. 1991 IMPI Mexico #197187 All Rights Reserved. Carlos Barrera.
--------------------------------------
·2-Imploturbocompressor; One Moving Part System Excellence Design - The InFlow Interaction comes from Macro-Flow and goes to Micro-Flow by Implossion - Only One Compression Step; Inflow, Compression and outflow at one simple circular dynamic motion Concept.
·“Excellence in Design" because is only one moving part. Only one unique compression step. Inflow and out flow at the same one system, This invention by its nature a logic and simple conception in the dynamics flow mechanics area. The invention is a wing made of one piece in a rotating motion, contained in a pair cavity system connected by implocavity, and interacting dynamically with a flow, that passes internally "Imploded" through its simple mechanism. This flow can be gas (air) or liquid (water). And have two diferents aplications, in two diferents form-function; this one can be received (using the dynamic flow passage, as a receiver). Or it can be generated (with a power plant, generating a propulsion).
-An example cut be, as a Bike needs a chain to work from motor to wheel. And for the Imploturbocompressor application, cut be as; in a circumstance at the engine, as an A-activate flow, and with a a tube flow conduit going to the wheel as a B-receiving-flow the work use.
-To see a Imploturbocompressor animation, is posible on a simple way, just to check the Hurricane Satellite View, and is the same implo inflow way nature.
Turbina de Engrane Sistema Turbo-Rotativo documento
Tecnología Termodinámica Atípica - Proyecto, Turbina de Engrane Sistema Turbo Rotativo / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses /Es similar en su simple función básica a la Turbina de Herón de Alexandria 10-70AD. / *8-X/Y Etapas de Ciclo Termodinámico / Patente; Dic. 1991 IMPI México #197187 / Con un muy elevado porcentaje de eficiencia.
3200 Gearturbine Rotary-Turbo-InFlow Novel Tech
State of the art / Novel Rotary-Turbo-InFlow Tech / Featured Development - GEARTURBINE PROJECT Have the similar basic system of the Aeolipile Heron Steam Turbine device from Alexandria 10-70 AD * With Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses *8X/Y Thermodynamic CYCLE Way Steps. Higher efficient percent. No blade erosion by sand & very low heat target signature Pat:197187IMPI MX Dic1991 Atypical Motor Engine Type
Grand finale gearturbine project documento
Novel Rotary-InFlow Technology / Gearturbine Project – Featured Development
*GEARTURBINE PROJECT:
Atypical InFlow Thermodynamic
Technology Proposal Submission
Innovative [TURBO-ROTARY]
Novel (Fueled) Motor Engine Type
-The Gearturbine comes from the contemporary ecological essential global needs of an efficient power plant fueled motor engine. -Power thrust by bar (tube); air, sea, land and power generation, work use application.
*Have the similar simple basic system of the "Aelopilie" Heron´s Steam Turbine device from Alexandria, [10-70 AD] one thousand nine hundred years ago. Because; the circular dynamic motion, with 2/Two Opposites power [polar position] lever, and is feeds from his axis center.
YouTube Video/10.30 min; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
http://www.youtube.com/watch?v=0cPo9Lf44TE
-Desirable Contemporary Innovation, With the Possible [Efficient] Invention. -Mechanical [Thermodynamic] Universal Human History Evolution. [Unlike] Epic Technology Revelation. -Next Step Power-plant New Design Form Function Device Change.
*8-X/Y Thermodynamic CYCLE - Way Steps:
1)1-Compression / bigger
2)2-Turbo 1 cold
3)2-Turbo 2 cold
4)2-Combustion - circular motion flames / opposites
5)2-Thrust - single turbo & planetary gears / ying yang
6)2-Turbo 2 hot
7)2-Turbo 1 hot
8)1-Turbine / bigger
*Innovation Technology Break Barrier / Paradigm [Broken-Seal] Solution. State of the art. Innovative Turbo-Rotary concept Top system.
-With Retrodynamic Dextrogiro vs. Levogiro Phenomenon Effect. / Rotor-RPM VS InFlow / front=> to <=front; "Collision-Interaction Type" - inflow vs. blades-gear-move. Technical unique dynamic innovative motion mode. [Retrodynamic Reaction = When the inflow have more velocity the rotor have more RPM Acceleration, with high (XY Position) Momentum ] Which the internal flow (and rotor) duplicate its speed, when activated being in a rotor (and inflow) with [inverse] opposite Turns. A very strong Novel concept of torque power thrust. At field explanatory example with a metaphor is like if a sailboat take the wind from his prow front to move; wind/inflow + knots/rpm + wind/inflow + knots/rpm + wind/inflow + knots/rpm + etc... = Acceleration x Acceleration = Exponential Acceleration. Whereas it has more movements forwards, it receives a frontal impulse still but to move more forwards. A present example of the implementation of the Retrodynamic effect is in the application in the accelerator (and collider) of particles that this in the border of Switzerland and France.
-Shape-Mass + Rotary-Motion = Inertia-Dynamic / Form-Function Wide [Flat] Cylindrical shape + positive dynamic rotary mass = continue Inertia kinetic positive tendency motion / all the complete Rotary motor mass weight is going with the power thrust move circular direction.
-Non-waste parasitic looses system for cooling, lubrication & combustion; -Lubrication &
Finaltext gearturbine project documento
The Gearturbine project proposes an innovative thermodynamic engine that uses retrodynamic and rotary concepts for increased efficiency. It builds on the design of ancient steam turbines but with contemporary needs in mind. The engine consists of four rotary turbines in an 8-step thermodynamic cycle for compression, combustion, and power regeneration. Combustion occurs inside through two continuous circular flames. Lubrication, cooling, and fuel injection are achieved without parasitic losses through centrifugal and thermomix forces within conduits. This unique dynamic motion could provide a highly efficient new option for power generation and transportation.
Gearturbine PLUS Information
The document describes an innovative turbine engine called the Gearturbine. It uses a retrodynamic effect where the direction of the inflow is opposite to the circular rotary motion, increasing rpm. It has an 8-cycle process involving compression, combustion, and turbine stages. The wide cylindrical design aims to be highly efficient with minimal parasitic losses through its cooling, lubrication and combustion system design. It was patented in Mexico in 1991 and claimed to be one of the most efficient power plant engines currently.
Turbina de Engrane
Tecnologia Info Tip / Turbina de Engrane - Retrodinamico - Atipico
http://gearturbine.260mb.com
You Tube Video; Atypical New * GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
http://www.youtube.com/watch?v=0cPo9Lf44TE
*1-"Turbina de Engrane"/Gearturbine); un sistema que no tiene perdidas parasitas, primeramente se incrementa su compresion mediante la reduccion de la circunferencia de los conductos= de uno grande hacia dos mas reducidos y con una proyeccion muy larga(similar a un sistema degestivo, y tambien al concepto de propulsion por tubo de escape) perfectamente bien balanceado empieza donde termina como una vibora mordiendose su propia cola, no tiene perdidas de energia para su sistema de enfriamiento, tiene un rotor que internamente esta activo con 4 parejas de turbocompresores retrodinamicos, 3 etapas de compression antes de la combustion, 3 puntos de fuerza; 1-flama, 2-engrane, 3-propulsion en un solo sistema, simple fuerza mecanica directa con dos pequeñ¯³ engranes (muy fuerte) presentados con una posicion polar, y apoyandose dentro de un engrane grande en una carcaza y con un movimiento planetario, de esta manera resolviendo la reduccion de rapido a lento RPM de una manera muy sencilla y haciedo posible para aplicacion de tierra, para su combustion tiene dos flamas continuas girando (de combustion completa y limpia (no como el piston))similar al moviminto circular de el YING YANG, motor hibrido; turbinas de accion y reaccion en un solo sistema, trasmicion de poder mediante barra, el unico con la cualidad tecnica de efecto rerodynamico "dextrogiro contra levogiro" y pasa cuando el flujo interno gira contario al movimiento del rotor haciendo un fenomeno muy fuerte (que seria tomando de ejemplo a un boxeador, es como moverse para el lado del golpe) Retrodinamico; duplicando la potencia con la misma unidad de energia.
Gearturbine
Gearturbine - Atypical Inflow Thermodynamic Technology
http://gearturbine.260mb.com
YouTube Video; Atypical New * GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
http://www.youtube.com/watch?v=0cPo9Lf44TE
GEARTURBINE -Atypical Combustion Turbine Engine, -State of the Art, -New Thermodynamic Technology, -With Retrodynamic "Dextrogiro vs Levogiro" Effect, is when the inflow direction moves is against [VS] of the circular rotary dynamic, When the inflow have more velocity the rotor have more RPM / because push the single turbine with the planetary gear, (an a example is like to move the head to the side of the strike hit) / RPM Rotor Move VS Inflow Conduits Way /ACTION VS REACTION / Front to Front / Velocity vs Velocity, making in a simple way a very strong concept of power thrust, a unique technical quality. -Wide cylindrical shape dynamic mass (continue Inertia cinetic positive tendens motion / all the motor weight is goin with the power thrust direction), -Non Waste, parasitic losses form-function engine system for; cooling, lubrication & combustion; -Lubrication & Combustion inside a conduit radial position, out way direction, activated by centrifugal force Fueled Injected, -Cooling in & out; In by Thermomix flow & Out by air Thermo transference, activated by the dynamic rotary move, -Increase the first compression by going of reduction of one big circumference fan blades going to, -2two very long distance captive compression inflow propulsion conduits (like a digestive system) (long interaction) in perfect equilibrium well balanced start were end like a snake bite his own tale, -Inside active rotor with 4 pairs of retrodynamic turbos (complete regeneration power system), -Mechanical direct "Planetary Gear" power thrust like a Ying Yang (very strong torque) (friendly loose friction) 2two small gears in polar position inside a bigger shell gear, wide out the rotor circumference were have much more lever power thrust, lower RPM in a simple way solution, to make possible for a some innovative work application (cars/land). -3 Stages of inflow turbo compression before the combustion. -3 points united of power thrust; 1- Rocket Flames, 2-Planetary Gear & 3-Exhaust Propulsion, all in one system. -2two continuous circular moving inside combustion (rocket flames) like two dragons trying to bite the tail of the opposite other. -Hybrid flow system different kind of aerolasticity thermoplastic inflow propulsion types; single, action & reaction turbines applied in one same system, -Military benefits, No blade erosion by sand & very low heat target profile. -Power thrust by barr (tube); air sea land & generation application, -A pretender of very high % porcent efficient power plant engine. -Patent; Dic 1991 IMPI Mexico #197187
Gearturbine - Atypical Inflow Thermodynamic Technology
http://gearturbine.260mb.com
YouTube Video; Atypical New * GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
http://www.youtube.com/watch?v=0cPo9Lf44TE
GEARTURBINE -Atypical Combustion Turbine Engine, -State of the Art, -New Thermodynamic Technology, -With Retrodynamic "Dextrogiro vs Levogiro" Effect, is when the inflow direction moves is against [VS] of the circular rotary dynamic, When the inflow have more velocity the rotor have more RPM / because push the single turbine with the planetary gear, (an a example is like to move the head to the side of the strike hit) / RPM Rotor Move VS Inflow Conduits Way /ACTION VS REACTION / Front to Front / Velocity vs Velocity, making in a simple way a very strong concept of power thrust, a unique technical quality. -Wide cylindrical shape dynamic mass (continue Inertia cinetic positive tendens motion / all the motor weight is goin with the power thrust direction), -Non Waste, parasitic losses form-function engine system for; cooling, lubrication & combustion; -Lubrication & Combustion inside a conduit radial position, out way direction, activated by centrifugal force Fueled Injected, -Cooling in & out; In by Thermomix flow & Out by air Thermo transference, activated by the dynamic rotary move, -Increase the first compression by going of reduction of one big circumference fan blades going to, -2two very long distance captive compression inflow propulsion conduits (like a digestive system) (long interaction) in perfect equilibrium well balanced start were end like a snake bite his own tale, -Inside active rotor with 4 pairs of retrodynamic turbos (complete regeneration power system), -Mechanical direct "Planetary Gear" power thrust like a Ying Yang (very strong torque) (friendly loose friction) 2two small gears in polar position inside a bigger shell gear, wide out the rotor circumference were have much more lever power thrust, lower RPM in a simple way solution, to make possible for a some innovative work application (cars/land). -3 Stages of inflow turbo compression before the combustion. -3 points united of power thrust; 1- Rocket Flames, 2-Planetary Gear & 3-Exhaust Propulsion, all in one system. -2two continuous circular moving inside combustion (rocket flames) like two dragons trying to bite the tail of the opposite other. -Hybrid flow system different kind of aerolasticity thermoplastic inflow propulsion types; single, action & reaction turbines applied in one same system, -Military benefits, No blade erosion by sand & very low heat target profile. -Power thrust by barr (tube); air sea land & generation application, -A pretender of very high % porcent efficient power plant engine. -Patent; Dic 1991 IMPI Mexico #197187
More Related Content
Viewers also liked
Refusing to Conform_ Arizona becomes the 10th State to Reject Common Core
The Arizona State Board of Education voted to remove Arizona from Common Core, making it the 10th state to reject the controversial education reforms. While this rejects Common Core standards, the existing standards remain for now until new ones are developed. Activism is still needed to push for localized, state-created standards. Supporters are thanked for their work against Common Core and urged to continue advocating for educational choice free from federal overreach.
resume new n
Nicole Genaw has experience in healthcare, education, and customer service. She has a bachelor's degree in human services and an associate degree in liberal arts. Her professional experience includes internships in foster care advocacy and positions as a hostess, teacher, and waitress where she was responsible for tasks like food service, cleaning, documentation, and evaluating children's development.
Digital sandbox imovie
The document provides resources for an event about tapping into one's creative side using the iPad and multimedia. It lists tutorial and example videos that will be shown including tutorials for iMovie and several short videos created by students and teachers on topics like everyday moments, thanksgiving, and spending time with family. The resources are meant to inspire administrators attending a workshop about digital creativity.
CompTIA A+ certificate
This document is a CompTIA certification for Frank Bryan Navarro with the number COMP001020880703 and an expiration date of July 27, 2018. It has a verification code of Y49SLFT3DDB15F65 that can be checked online at http://verify.CompTIA.org.
3 esporte pg 02
O documento lista os jogos das oitavas de final da Copa Libertadores da América de 2012 e da Copa do Brasil de 2012. Na Libertadores, os jogos de ida das oitavas de final ocorreram entre os dias 25 de abril e 3 de maio e os jogos de volta entre os dias 9 e 10 de maio. Na Copa do Brasil, as oitavas de final ocorreram entre os dias 25 de abril e 10 de maio em diferentes estádios brasileiros.
Decreto 2085 2002
Este decreto establece las regulaciones para obtener registro sanitario de nuevas entidades químicas en medicamentos en Colombia. Define una nueva entidad química como un principio activo no incluido previamente en normas farmacológicas colombianas. Protege el uso de información no divulgada presentada para la aprobación de una nueva entidad química por períodos de 3 a 5 años dependiendo de la fecha de presentación de la solicitud. Exime la protección en casos donde el titular del registro autorice el uso de la información, la
Matematicas
El documento presenta una serie de operaciones matemáticas con matrices y vectores. Se definen varias matrices A, B, C, D, Z, W y V y se pide realizar operaciones como sumas, multiplicaciones y determinantes utilizando valores específicos para las variables x, y y z. Finalmente, se solicita hallar la transpuesta de algunas matrices para determinar si son simétricas.
Maryuri
La hoja de registro pertenece a Maryuri Lisset Ovaco Medina, una estudiante del primer semestre de Enfermería en la Universidad Técnica de Machala, Ecuador.
Ave noturna
Este documento relata observações de duas espécies de aves noturnas, Pulsatrix koeniswaldiana e Nyctibius grandis, em uma área urbana na cidade de Ipanema, Minas Gerais, Brasil. As aves foram avistadas pousadas em postes de iluminação, possivelmente atraídas pelos insetos ao redor das lâmpadas. Essas observações sugerem que as aves podem se alimentar em ambientes urbanos, apesar de seus hábitats típicos serem florestas.
Viewers also liked (12)
Refusing to Conform_ Arizona becomes the 10th State to Reject Common Core
Refusing to Conform_ Arizona becomes the 10th State to Reject Common Core
More from Carlos Barrera
State of the Art · Novel Rotary-Turbo-InFlow Tech - Featured Development / GE...
·1- GEARTURBINE PROJECT
-
New Form-Function Motor-Engine Device
State of the art.
-Innovative Thermodynamic concept Top system
.
-Have the similar simple basic system of the "Aelopilie" Heron´s Steam Turbine device from Alexandria 10-70 AD.
* Atypical New GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
*8X/Y Thermodynamic CYCLE Way Steps
.
-With Retrodynamic Dextrogiro vs Levogiro Phenomenon Effect Rotor-RPM VS InFlow CollisionInteraction Type
.
-Shape-Mass + Rotary-Motion = Inertia-Dynamic.
-
Non-waste parasitic looses system for cooling, lubrication & combustion
.
-Combustion 2Two InsideRotaryDynamic continue circular Rockets flames
4 TURBOS insiderotaryactive
.
-Mechanical direct 2two Small Planetary Gears like Ying Yang Simbol.
-No blade erosion by sand & very low heat target signature.
*Patent; Dic. 1991 IMPI Mexico #197187 All Rights Reserved. Carlos Barrera.
--------------------------------------
·2-Imploturbocompressor; One Moving Part System Excellence Design - The InFlow Interaction comes from Macro-Flow and goes to Micro-Flow by Implossion - Only One Compression Step; Inflow, Compression and outflow at one simple circular dynamic motion Concept.
·“Excellence in Design" because is only one moving part. Only one unique compression step. Inflow and out flow at the same one system, This invention by its nature a logic and simple conception in the dynamics flow mechanics area. The invention is a wing made of one piece in a rotating motion, contained in a pair cavity system connected by implocavity, and interacting dynamically with a flow, that passes internally "Imploded" through its simple mechanism. This flow can be gas (air) or liquid (water). And have two diferents aplications, in two diferents form-function; this one can be received (using the dynamic flow passage, as a receiver). Or it can be generated (with a power plant, generating a propulsion).
-An example cut be, as a Bike needs a chain to work from motor to wheel. And for the Imploturbocompressor application, cut be as; in a circumstance at the engine, as an A-activate flow, and with a a tube flow conduit going to the wheel as a B-receiving-flow the work use.
-To see a Imploturbocompressor animation, is posible on a simple way, just to check the Hurricane Satellite View, and is the same implo inflow way nature.
Turbina de Engrane Sistema Turbo-Rotativo documento
Tecnología Termodinámica Atípica - Proyecto, Turbina de Engrane Sistema Turbo Rotativo / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses /Es similar en su simple función básica a la Turbina de Herón de Alexandria 10-70AD. / *8-X/Y Etapas de Ciclo Termodinámico / Patente; Dic. 1991 IMPI México #197187 / Con un muy elevado porcentaje de eficiencia.
3200 Gearturbine Rotary-Turbo-InFlow Novel Tech
State of the art / Novel Rotary-Turbo-InFlow Tech / Featured Development - GEARTURBINE PROJECT Have the similar basic system of the Aeolipile Heron Steam Turbine device from Alexandria 10-70 AD * With Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses *8X/Y Thermodynamic CYCLE Way Steps. Higher efficient percent. No blade erosion by sand & very low heat target signature Pat:197187IMPI MX Dic1991 Atypical Motor Engine Type
Grand finale gearturbine project documento
Novel Rotary-InFlow Technology / Gearturbine Project – Featured Development
*GEARTURBINE PROJECT:
Atypical InFlow Thermodynamic
Technology Proposal Submission
Innovative [TURBO-ROTARY]
Novel (Fueled) Motor Engine Type
-The Gearturbine comes from the contemporary ecological essential global needs of an efficient power plant fueled motor engine. -Power thrust by bar (tube); air, sea, land and power generation, work use application.
*Have the similar simple basic system of the "Aelopilie" Heron´s Steam Turbine device from Alexandria, [10-70 AD] one thousand nine hundred years ago. Because; the circular dynamic motion, with 2/Two Opposites power [polar position] lever, and is feeds from his axis center.
YouTube Video/10.30 min; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
http://www.youtube.com/watch?v=0cPo9Lf44TE
-Desirable Contemporary Innovation, With the Possible [Efficient] Invention. -Mechanical [Thermodynamic] Universal Human History Evolution. [Unlike] Epic Technology Revelation. -Next Step Power-plant New Design Form Function Device Change.
*8-X/Y Thermodynamic CYCLE - Way Steps:
1)1-Compression / bigger
2)2-Turbo 1 cold
3)2-Turbo 2 cold
4)2-Combustion - circular motion flames / opposites
5)2-Thrust - single turbo & planetary gears / ying yang
6)2-Turbo 2 hot
7)2-Turbo 1 hot
8)1-Turbine / bigger
*Innovation Technology Break Barrier / Paradigm [Broken-Seal] Solution. State of the art. Innovative Turbo-Rotary concept Top system.
-With Retrodynamic Dextrogiro vs. Levogiro Phenomenon Effect. / Rotor-RPM VS InFlow / front=> to <=front; "Collision-Interaction Type" - inflow vs. blades-gear-move. Technical unique dynamic innovative motion mode. [Retrodynamic Reaction = When the inflow have more velocity the rotor have more RPM Acceleration, with high (XY Position) Momentum ] Which the internal flow (and rotor) duplicate its speed, when activated being in a rotor (and inflow) with [inverse] opposite Turns. A very strong Novel concept of torque power thrust. At field explanatory example with a metaphor is like if a sailboat take the wind from his prow front to move; wind/inflow + knots/rpm + wind/inflow + knots/rpm + wind/inflow + knots/rpm + etc... = Acceleration x Acceleration = Exponential Acceleration. Whereas it has more movements forwards, it receives a frontal impulse still but to move more forwards. A present example of the implementation of the Retrodynamic effect is in the application in the accelerator (and collider) of particles that this in the border of Switzerland and France.
-Shape-Mass + Rotary-Motion = Inertia-Dynamic / Form-Function Wide [Flat] Cylindrical shape + positive dynamic rotary mass = continue Inertia kinetic positive tendency motion / all the complete Rotary motor mass weight is going with the power thrust move circular direction.
-Non-waste parasitic looses system for cooling, lubrication & combustion; -Lubrication &
Finaltext gearturbine project documento
The Gearturbine project proposes an innovative thermodynamic engine that uses retrodynamic and rotary concepts for increased efficiency. It builds on the design of ancient steam turbines but with contemporary needs in mind. The engine consists of four rotary turbines in an 8-step thermodynamic cycle for compression, combustion, and power regeneration. Combustion occurs inside through two continuous circular flames. Lubrication, cooling, and fuel injection are achieved without parasitic losses through centrifugal and thermomix forces within conduits. This unique dynamic motion could provide a highly efficient new option for power generation and transportation.
Gearturbine PLUS Information
The document describes an innovative turbine engine called the Gearturbine. It uses a retrodynamic effect where the direction of the inflow is opposite to the circular rotary motion, increasing rpm. It has an 8-cycle process involving compression, combustion, and turbine stages. The wide cylindrical design aims to be highly efficient with minimal parasitic losses through its cooling, lubrication and combustion system design. It was patented in Mexico in 1991 and claimed to be one of the most efficient power plant engines currently.
Turbina de Engrane
Tecnologia Info Tip / Turbina de Engrane - Retrodinamico - Atipico
http://gearturbine.260mb.com
You Tube Video; Atypical New * GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
http://www.youtube.com/watch?v=0cPo9Lf44TE
*1-"Turbina de Engrane"/Gearturbine); un sistema que no tiene perdidas parasitas, primeramente se incrementa su compresion mediante la reduccion de la circunferencia de los conductos= de uno grande hacia dos mas reducidos y con una proyeccion muy larga(similar a un sistema degestivo, y tambien al concepto de propulsion por tubo de escape) perfectamente bien balanceado empieza donde termina como una vibora mordiendose su propia cola, no tiene perdidas de energia para su sistema de enfriamiento, tiene un rotor que internamente esta activo con 4 parejas de turbocompresores retrodinamicos, 3 etapas de compression antes de la combustion, 3 puntos de fuerza; 1-flama, 2-engrane, 3-propulsion en un solo sistema, simple fuerza mecanica directa con dos pequeñ¯³ engranes (muy fuerte) presentados con una posicion polar, y apoyandose dentro de un engrane grande en una carcaza y con un movimiento planetario, de esta manera resolviendo la reduccion de rapido a lento RPM de una manera muy sencilla y haciedo posible para aplicacion de tierra, para su combustion tiene dos flamas continuas girando (de combustion completa y limpia (no como el piston))similar al moviminto circular de el YING YANG, motor hibrido; turbinas de accion y reaccion en un solo sistema, trasmicion de poder mediante barra, el unico con la cualidad tecnica de efecto rerodynamico "dextrogiro contra levogiro" y pasa cuando el flujo interno gira contario al movimiento del rotor haciendo un fenomeno muy fuerte (que seria tomando de ejemplo a un boxeador, es como moverse para el lado del golpe) Retrodinamico; duplicando la potencia con la misma unidad de energia.
Gearturbine
Gearturbine - Atypical Inflow Thermodynamic Technology
http://gearturbine.260mb.com
YouTube Video; Atypical New * GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
http://www.youtube.com/watch?v=0cPo9Lf44TE
GEARTURBINE -Atypical Combustion Turbine Engine, -State of the Art, -New Thermodynamic Technology, -With Retrodynamic "Dextrogiro vs Levogiro" Effect, is when the inflow direction moves is against [VS] of the circular rotary dynamic, When the inflow have more velocity the rotor have more RPM / because push the single turbine with the planetary gear, (an a example is like to move the head to the side of the strike hit) / RPM Rotor Move VS Inflow Conduits Way /ACTION VS REACTION / Front to Front / Velocity vs Velocity, making in a simple way a very strong concept of power thrust, a unique technical quality. -Wide cylindrical shape dynamic mass (continue Inertia cinetic positive tendens motion / all the motor weight is goin with the power thrust direction), -Non Waste, parasitic losses form-function engine system for; cooling, lubrication & combustion; -Lubrication & Combustion inside a conduit radial position, out way direction, activated by centrifugal force Fueled Injected, -Cooling in & out; In by Thermomix flow & Out by air Thermo transference, activated by the dynamic rotary move, -Increase the first compression by going of reduction of one big circumference fan blades going to, -2two very long distance captive compression inflow propulsion conduits (like a digestive system) (long interaction) in perfect equilibrium well balanced start were end like a snake bite his own tale, -Inside active rotor with 4 pairs of retrodynamic turbos (complete regeneration power system), -Mechanical direct "Planetary Gear" power thrust like a Ying Yang (very strong torque) (friendly loose friction) 2two small gears in polar position inside a bigger shell gear, wide out the rotor circumference were have much more lever power thrust, lower RPM in a simple way solution, to make possible for a some innovative work application (cars/land). -3 Stages of inflow turbo compression before the combustion. -3 points united of power thrust; 1- Rocket Flames, 2-Planetary Gear & 3-Exhaust Propulsion, all in one system. -2two continuous circular moving inside combustion (rocket flames) like two dragons trying to bite the tail of the opposite other. -Hybrid flow system different kind of aerolasticity thermoplastic inflow propulsion types; single, action & reaction turbines applied in one same system, -Military benefits, No blade erosion by sand & very low heat target profile. -Power thrust by barr (tube); air sea land & generation application, -A pretender of very high % porcent efficient power plant engine. -Patent; Dic 1991 IMPI Mexico #197187
Gearturbine - Atypical Inflow Thermodynamic Technology
http://gearturbine.260mb.com
YouTube Video; Atypical New * GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses
http://www.youtube.com/watch?v=0cPo9Lf44TE
GEARTURBINE -Atypical Combustion Turbine Engine, -State of the Art, -New Thermodynamic Technology, -With Retrodynamic "Dextrogiro vs Levogiro" Effect, is when the inflow direction moves is against [VS] of the circular rotary dynamic, When the inflow have more velocity the rotor have more RPM / because push the single turbine with the planetary gear, (an a example is like to move the head to the side of the strike hit) / RPM Rotor Move VS Inflow Conduits Way /ACTION VS REACTION / Front to Front / Velocity vs Velocity, making in a simple way a very strong concept of power thrust, a unique technical quality. -Wide cylindrical shape dynamic mass (continue Inertia cinetic positive tendens motion / all the motor weight is goin with the power thrust direction), -Non Waste, parasitic losses form-function engine system for; cooling, lubrication & combustion; -Lubrication & Combustion inside a conduit radial position, out way direction, activated by centrifugal force Fueled Injected, -Cooling in & out; In by Thermomix flow & Out by air Thermo transference, activated by the dynamic rotary move, -Increase the first compression by going of reduction of one big circumference fan blades going to, -2two very long distance captive compression inflow propulsion conduits (like a digestive system) (long interaction) in perfect equilibrium well balanced start were end like a snake bite his own tale, -Inside active rotor with 4 pairs of retrodynamic turbos (complete regeneration power system), -Mechanical direct "Planetary Gear" power thrust like a Ying Yang (very strong torque) (friendly loose friction) 2two small gears in polar position inside a bigger shell gear, wide out the rotor circumference were have much more lever power thrust, lower RPM in a simple way solution, to make possible for a some innovative work application (cars/land). -3 Stages of inflow turbo compression before the combustion. -3 points united of power thrust; 1- Rocket Flames, 2-Planetary Gear & 3-Exhaust Propulsion, all in one system. -2two continuous circular moving inside combustion (rocket flames) like two dragons trying to bite the tail of the opposite other. -Hybrid flow system different kind of aerolasticity thermoplastic inflow propulsion types; single, action & reaction turbines applied in one same system, -Military benefits, No blade erosion by sand & very low heat target profile. -Power thrust by barr (tube); air sea land & generation application, -A pretender of very high % porcent efficient power plant engine. -Patent; Dic 1991 IMPI Mexico #197187
More from Carlos Barrera (9)
State of the Art · Novel Rotary-Turbo-InFlow Tech - Featured Development / GE...
State of the Art · Novel Rotary-Turbo-InFlow Tech - Featured Development / GE...
Turbina de Engrane Sistema Turbo-Rotativo documento
Turbina de Engrane Sistema Turbo-Rotativo documento
Gearturbine - Atypical Inflow Thermodynamic Technology
Gearturbine - Atypical Inflow Thermodynamic Technology
Recently uploaded
What is an RPA CoE? Session 2 – CoE Roles
In this session, we will review the players involved in the CoE and how each role impacts opportunities.
Topics covered:
• What roles are essential?
• What place in the automation journey does each role play?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
Principle of conventional tomography-Bibash Shahi ppt..pptx
before the computed tomography, it had been widely used.
ScyllaDB Tablets: Rethinking Replication
ScyllaDB is making a major architecture shift. We’re moving from vNode replication to tablets – fragments of tables that are distributed independently, enabling dynamic data distribution and extreme elasticity. In this keynote, ScyllaDB co-founder and CTO Avi Kivity explains the reason for this shift, provides a look at the implementation and roadmap, and shares how this shift benefits ScyllaDB users.
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Dmitrii Kamaev, PhD
Senior Product Owner - QIAGEN
Demystifying Knowledge Management through Storytelling
The Department of Veteran Affairs (VA) invited Taylor Paschal, Knowledge & Information Management Consultant at Enterprise Knowledge, to speak at a Knowledge Management Lunch and Learn hosted on June 12, 2024. All Office of Administration staff were invited to attend and received professional development credit for participating in the voluntary event.
The objectives of the Lunch and Learn presentation were to:
- Review what KM ‘is’ and ‘isn’t’
- Understand the value of KM and the benefits of engaging
- Define and reflect on your “what’s in it for me?”
- Share actionable ways you can participate in Knowledge - - Capture & Transfer
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
These are the slides for the presentation, "Component Testing: Bridging the gap between frontend applications" that was presented at QA or the Highway 2024 in Columbus, OH by Zachary Hamm.
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
Discover how AI is transforming the workplace and learn strategies for reskilling and upskilling employees to stay ahead. This comprehensive guide covers the impact of AI on jobs, essential skills for the future, and successful case studies from industry leaders. Embrace AI-driven changes, foster continuous learning, and build a future-ready workforce.
Read More - https://bit.ly/3VKly70
Apps Break Data
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
From Natural Language to Structured Solr Queries using LLMs
This talk draws on experimentation to enable AI applications with Solr. One important use case is to use AI for better accessibility and discoverability of the data: while User eXperience techniques, lexical search improvements, and data harmonization can take organizations to a good level of accessibility, a structural (or “cognitive” gap) remains between the data user needs and the data producer constraints.
That is where AI – and most importantly, Natural Language Processing and Large Language Model techniques – could make a difference. This natural language, conversational engine could facilitate access and usage of the data leveraging the semantics of any data source.
The objective of the presentation is to propose a technical approach and a way forward to achieve this goal.
The key concept is to enable users to express their search queries in natural language, which the LLM then enriches, interprets, and translates into structured queries based on the Solr index’s metadata.
This approach leverages the LLM’s ability to understand the nuances of natural language and the structure of documents within Apache Solr.
The LLM acts as an intermediary agent, offering a transparent experience to users automatically and potentially uncovering relevant documents that conventional search methods might overlook. The presentation will include the results of this experimental work, lessons learned, best practices, and the scope of future work that should improve the approach and make it production-ready.
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Recently uploaded (20)
Poznań ACE event - 19.06.2024 Team 24 Wrapup slidedeck
Poznań ACE event - 19.06.2024 Team 24 Wrapup slidedeck
Principle of conventional tomography-Bibash Shahi ppt..pptx
Principle of conventional tomography-Bibash Shahi ppt..pptx
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Demystifying Knowledge Management through Storytelling
Demystifying Knowledge Management through Storytelling
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
From Natural Language to Structured Solr Queries using LLMs
From Natural Language to Structured Solr Queries using LLMs
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
397 gearturbine documento
- 1. Novel Rotary-Turbo-InFlow Technology / Featured Development GEARTURBINE PROJECT Have the similar simple basic system of the Aelopilie Heron Steam device from Alexandria 10- 70 AD * Atypical New GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses http://www.youtube.com/watch?v=0cPo9Lf44TE 8X/Y Thermodynamic CYCLE Way Steps Pat Dic. 1991 IMPI Mexico 197187