This document summarizes the key features and design of a high-end audio turntable. It has a heavy platter and rubber belts that help maintain a consistent speed. The one-piece machined tonearm is made of lightweight steel to minimize vibrations. It isolates the system from outside vibrations using three alumina balls that have minimal contact with the chassis. Different materials in the upside-down design filter vibrations, with oak wood and acrylic glass providing great acoustic properties. Assembly is easy with an integrated water level for proper positioning.

1. HIGH-END AUDIO
TURNTABLE
Product-Design

2. “Experiencing
Music as it is live.“
Precision and craftsmanship guarantees great sound.
• The motor runs calm and with consistent speed
• The heavy platter helps to keep the speed from
varying.
• The rubber belts absorb motor vibrations.
• The tonearm is machined in one piece of lightweight
steel, not cast or pressed.

3. The balls have minimal
contact with the chassis and
the underground due to their
spherical shape.
“Isolation is the
Secret of great
Sound.“
By lifting up the chassis three alumina balls become
visible. They are the key part of the damping system and
the only connection between chassis and environment. It
isolates the system perfectly from outside vibrations.

4. “Upside-down“
Different materials filter different vibrations. The
combination of hard oak wood and soft acrylic glass has
great acoustic properties.

5. “Easy to set up“
An integrated water level creates awareness and
educates the consumer about the right position.

6. 1
4
8 2
5
6
7
3
Assembly &
Materials
1 anodized aluminum (mounting plate for
tonearm & bearing, motor housing, cov-
ers, subplatter)
2 stainless steel (inserts / ball contact
surface)
3 sintered bronze (bearing)
4 oak wood (chassis)
5 safety glass (platter)
6 acryl glass (lower plate, slide-in feet)
7 alumina (balls)
8 rubber (belt, cable exit)