220 SILO MOUNT
•
0 likes•26 views
This document provides a disclaimer and legal notice regarding product information from Vishay Precision Group. It states that all product specifications and data are subject to change without notice. It disclaims any liability for errors in product information and specifies that the customer is responsible for validating suitability for their intended application. No license is granted to any intellectual property and customers use products at their own risk.
Report
Share
Report
Share
Download to read offline
Recommended
4158 SILO MOUNT
The document describes a heavy duty silo mount for use with a 4158 load cell to measure the weight of materials in tanks or silos. The silo mount is made of steel for durability and can support loads of up to 75,000 pounds. It has a low profile and simple installation. Dimensions and mounting hole specifications are provided for mounts with load capacities ranging from 10,000 to 75,000 pounds.
220 ROCKER PIN MOUNT
The rocker pin mount is designed for use on steel or concrete truck scales and weighbridges. It forms a compact assembly using a stainless steel pin and plated steel base that allows free motion in any direction for accurate weighing. Restraints must be fitted and Tedea-Huntleigh cannot be responsible for improper installation. Installation details are available separately.
Vishay Precision Group provides products including sensors and system but disclaims liability for any errors or inaccuracies in specifications. No license is granted to any intellectual property and customers must ensure they have the most current information and use products appropriately without liability to Vishay.
220-5T
The document is a legal disclaimer notice from Vishay Precision Group. It summarizes that all product specifications and data are subject to change without notice, and that VPG disclaims any liability for errors, inaccuracies, or changes to specifications. It also states that no licenses or warranties are granted by the document, and that customers use VPG products at their own risk.
220-10T WEIGHBRIDGE MOUNT
The document summarizes a 10 ton weighbridge mount product. It features a composite rubber and plated steel construction, is low profile, and provides shock resistance. It allows free motion in any direction while also providing restoring force and limiting vertical deflection. The mount can be easily installed in a few hours instead of over a day and accommodates expansion of the bridge structure. Dimensions and mounting details are provided.
T-END FOOT
The document provides information about T-End mounting feet for load cells. It describes the key features of the mounting feet, which include adjustable or fixed height, stainless steel construction, low profile, and anti-vibration properties. The mounting feet are designed to work with T-end version shear beam load cells and provide an impervious assembly for harsh industrial environments. Dimensional specifications are provided for the mounting feet to be used with different load cell models and capacities.
220-30-50T WEIGHBRIDGE MOUNT
This document summarizes a mount for weighbridges and truck scales. The mount is made of composite rubber and steel and provides shock absorption while maintaining rigidity. It allows for movement in any horizontal direction while returning to center and has low vertical deflection. Installation takes only a few hours compared to over a day for conventional mounts. Dimensions and mounting kit details are provided. Safety and liability disclaimers are also included.
60048
This document summarizes a low profile platform cell load cell model 60048 from Sensortronics. It has the following key features:
- Rated capacities from 25 to 1000 pounds
- Stainless steel construction
- Moment-compensated design for minimal sensitivity to off-center loading
- Meets NIST H-44 requirements and provides protection under adverse conditions
- Sealed to IP67 standards and approved for hazardous environments
65016
The document describes a double-ended shear beam load cell model 65016 from Sensortronics. It has rated capacities from 1000 to 100,000 pounds. It is insensitive to side loads and bending moments. It provides high output well-suited for high deadload, low liveload applications. It has excellent combined error and repeatability. Dimensions and specifications are provided for load cells in various capacity ranges.
Recommended
4158 SILO MOUNT
The document describes a heavy duty silo mount for use with a 4158 load cell to measure the weight of materials in tanks or silos. The silo mount is made of steel for durability and can support loads of up to 75,000 pounds. It has a low profile and simple installation. Dimensions and mounting hole specifications are provided for mounts with load capacities ranging from 10,000 to 75,000 pounds.
220 ROCKER PIN MOUNT
The rocker pin mount is designed for use on steel or concrete truck scales and weighbridges. It forms a compact assembly using a stainless steel pin and plated steel base that allows free motion in any direction for accurate weighing. Restraints must be fitted and Tedea-Huntleigh cannot be responsible for improper installation. Installation details are available separately.
Vishay Precision Group provides products including sensors and system but disclaims liability for any errors or inaccuracies in specifications. No license is granted to any intellectual property and customers must ensure they have the most current information and use products appropriately without liability to Vishay.
220-5T
The document is a legal disclaimer notice from Vishay Precision Group. It summarizes that all product specifications and data are subject to change without notice, and that VPG disclaims any liability for errors, inaccuracies, or changes to specifications. It also states that no licenses or warranties are granted by the document, and that customers use VPG products at their own risk.
220-10T WEIGHBRIDGE MOUNT
The document summarizes a 10 ton weighbridge mount product. It features a composite rubber and plated steel construction, is low profile, and provides shock resistance. It allows free motion in any direction while also providing restoring force and limiting vertical deflection. The mount can be easily installed in a few hours instead of over a day and accommodates expansion of the bridge structure. Dimensions and mounting details are provided.
T-END FOOT
The document provides information about T-End mounting feet for load cells. It describes the key features of the mounting feet, which include adjustable or fixed height, stainless steel construction, low profile, and anti-vibration properties. The mounting feet are designed to work with T-end version shear beam load cells and provide an impervious assembly for harsh industrial environments. Dimensional specifications are provided for the mounting feet to be used with different load cell models and capacities.
220-30-50T WEIGHBRIDGE MOUNT
This document summarizes a mount for weighbridges and truck scales. The mount is made of composite rubber and steel and provides shock absorption while maintaining rigidity. It allows for movement in any horizontal direction while returning to center and has low vertical deflection. Installation takes only a few hours compared to over a day for conventional mounts. Dimensions and mounting kit details are provided. Safety and liability disclaimers are also included.
60048
This document summarizes a low profile platform cell load cell model 60048 from Sensortronics. It has the following key features:
- Rated capacities from 25 to 1000 pounds
- Stainless steel construction
- Moment-compensated design for minimal sensitivity to off-center loading
- Meets NIST H-44 requirements and provides protection under adverse conditions
- Sealed to IP67 standards and approved for hazardous environments
65016
The document describes a double-ended shear beam load cell model 65016 from Sensortronics. It has rated capacities from 1000 to 100,000 pounds. It is insensitive to side loads and bending moments. It provides high output well-suited for high deadload, low liveload applications. It has excellent combined error and repeatability. Dimensions and specifications are provided for load cells in various capacity ranges.
ASC/DSC SELF-ALIGNING SET
The document describes ASC/DSC self-aligning accessories from VPG Sensors for weighing applications. The accessories provide self-aligning constructions for truck, rail, and silo scales with capacities from 30-50 tons. They are designed to ensure load cells are placed vertically and perpendicular to mounting surfaces without stay or check rods. Hardened corrosion resistant steel is used on all mount parts for long-term reliability.
92-93
This document provides specifications and information for Vishay Precision Group's Model 92/93 compression load cell. The load cell has capacities of 50k lbs and 100k lbs, is constructed of stainless steel, hermetically sealed, and has environmental protection of IP68. It is designed for compression applications such as in silos, tanks, hoppers, and scales. Dimensions, specifications, ratings, and mounting instructions are provided. A legal disclaimer is also included.
9123/5123 MOUNT
This document contains three summaries:
1. The document describes a 9123/5123 self-aligning mount and accessories for load cells, including a rocker pin design that allows for horizontal movement and easy installation/replacement of load cells. Materials are hardened and stainless steel is an option.
2. Dimensions and specifications are provided for mounts and feet for different weight capacities between 0.5-5 tons. Accessories include self-aligning mounts, height adjustable feet, and stay rod assemblies.
3. A legal disclaimer is provided stating that product specifications are subject to change and VPG makes no warranties regarding fitness for particular purposes or applications requiring life-critical or life-sustaining functions
620
This document summarizes a load cell product from Tedea-Huntleigh. It provides specifications for a stainless steel S-type load cell model 620 with capacities ranging from 500 to 5000 kg. It details the load cell's features such as stainless steel construction, IP68 sealing, and approvals. Dimensions, technical specifications, and mounting thread options are provided. The document also includes disclaimer information from Vishay Precision Group.
1410
The document describes the Model 1410 load cell, which was specifically designed for use in rotary filling machines. It has several advantages over conventional load cells for this application, including dramatically reduced settling times of less than 300 ms, high resistance to side loads and centrifugal forces, and effective isolation of base vibrations. These features allow for higher machine speeds and throughput without loss of accuracy. The load cell has two mounting options and is rated for capacities from 10-30 kg.
Trusted performance
This document summarizes the features and benefits of the Gore Excluder AAA Endoprosthesis. It has over 15 years of experience with over 190,000 devices distributed, proven durability backed by clinical and commercial data, and allows for more opportunities to optimize the infrarenal seal with an intuitive repositionable delivery system. Users can learn more at the provided website.
65058S
This document describes the Sensortronics Model 65058S stainless steel, welded seal double-ended shear beam load cell. It has the following key features:
- Rated capacities from 10,000 to 100,000 pounds
- Stainless steel welded seal construction provides protection to IP68 standards
- Insensitive to side loads and bending moments
- Integral conduit adapter and additional sense wires for temperature compensation
1142
This document summarizes information about the Tedea-Huntleigh Model 1142 single-point stainless steel load cell. It provides key details about the load cell's features, specifications, applications, description, and dimensions. The load cell has a capacity range of 10-150kg, is constructed of stainless steel, and is intended for use in platform, bench, counting, and other scales. It has an IP66 environmental protection rating and optional ATEX hazardous area approval.
9102 MOUNT
This document provides a legal disclaimer notice for Vishay Precision Group. It states that all product specifications and data are subject to change without notice. It disclaims any liability for errors in product information and specifies that the product specifications do not modify the standard terms of purchase. It also disclaims implied warranties and liability for damages arising from application or use of products not expressly designed for life-saving applications. The notice specifies that product names and markings may be trademarks of their respective owners.
380
This document summarizes a co-planar beam load cell model 380 from Tedea-Huntleigh. It has a capacity range of 7.5-250 kg, is only 2.5-8 mm high to allow for a very low profile, and is made of aluminum with IP65 protection. It is designed for use in various low profile scale applications like personal, medical, postal, and aircraft baggage scales. Dimensions and specifications are provided for the different load cell models.
SHBxR
This document summarizes the specifications and features of the SHBxR single-ended load beam model. Key details include:
- Capacities range from 5-500 kg
- Fully welded stainless steel construction certified to various standards including OIML and NTEP
- Sealed IP66 and IP68 rating suitable for harsh environments
- Optional ATEX and FM certification for explosive atmospheres
- Dimensions and specifications provided
DSC
This document summarizes specifications for a digital compression load cell model DSC. It can measure loads between 30-50 tons, has an IP66/IP68 sealed stainless steel construction, digital RS-485 interface, accurate to OIML R-60 class C3/C4, operating temperature of -40°C to 80°C, and is suitable for weighbridges and process weighing applications. The load cell has various performance specifications including accuracy, temperature coefficients, excitation voltage, and maximum cable length.
60058
This document summarizes information about the Sensortronics Model 60058 double-ended shear beam load cell. It has a rated capacity of 5,000 to 100,000 pounds or 2.3 to 45 metric tons. It is constructed of nickel-plated alloy steel to resist corrosion. It has an IP67 rating making it suitable for outdoor use and high-pressure wash down. Its high accuracy and capacity make it suitable for truck, rail, tank, bin and silo weighing applications.
KOF-K Kosher Cert_shandong sanwei
This document is a kosher certificate from Kof-K Kosher Supervision certifying four soy protein products - Concentrated Soy Protein, Soy Protein, Textured Soy Protein, and Textured Soy Protein Concentrate - produced by Shandong Sanwei Soybean Protein Co., Ltd. in China as kosher. The certificate provides the product names, kosher status as parve, and unique ID numbers for each product and is valid through July 31, 2016.
792
The document summarizes a compression load cell model 792 produced by Vishay Revere.
The load cell has a stainless steel construction, is hermetically sealed to IP68 standards for harsh environments, and has capacities ranging from 50 to 200 kilopounds. It is designed for compression applications such as scales, silos, and hoppers where long-term accuracy and reliability are required.
LOC
This document summarizes a low profile off-center single-point load cell model called the LOC. It provides key specifications of the load cell such as its capacities ranging from 5kg to 1000kg, accuracy classes, construction of anodized aluminum, environmental sealing of IP66, and operating temperature range of -20°C to +60°C. The document also contains dimensional drawings, wiring diagrams, and notices regarding disclaimers and trademarks.
65016-TWA
This document summarizes specifications for the Sensortronics Model 65016-TWA tank weighing assembly load cell. It has a capacity range of 1,000 to 75,000 pounds, mounts directly to floors or structures, and is self-checking with provisions for thermal expansion. It provides high accuracy even with agitated loads and is rated for use in hazardous environments. Dimensions and technical specifications are provided.
Certificate CM20069 20150721
This certificate confirms that the K3T Wall Panel System complies with specific requirements of the Australian Building Code. The prefabricated wall panel system is made from panels that are assembled onsite to form walls. The panels are mechanically fixed to the floor structure and each other with jointing components. The certificate is issued by SAI Global and is valid until 20/07/2018, subject to the conditions that the panels must be installed according to the manufacturer's guidelines, have individual structural analysis, and be covered with an exterior finish.
Case 21 f xt compact wheel loader service repair manual
This document is a service manual for compact wheel loaders. It contains sections on the engine, four-wheel drive system, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, and electrical systems. It also includes sections on the front loader and bucket as well as the platform, cab, bodywork, and decals.
9123
The document provides information on the Model 9123 single-ended beam load cell from Revere. It lists key features such as capacities from 500kg to 5000kg or 1k lbs to 20k lbs. It describes the low profile, IP67 sealing, and stainless steel construction. Dimensional drawings and specifications are provided for the load cell.
93006
This document summarizes a single-point stainless steel load cell model 93006. It has a capacity range of 10-60 kg and is constructed of stainless steel. It is designed for direct mounting in retail, bench, and counting scales. Its stainless steel construction makes it suitable for corrosive and wet environments. It provides specifications for the load cell such as rated output, tolerance, temperature range, material, and protection level. The document also includes a legal disclaimer for all product specifications.
92006
This document provides information about the Model 92006 single-point alloy steel load cell from Sensortronics. It can measure loads between 100 to 1500 kg and features alloy steel construction, IP66 protection, and optional stainless steel construction. It is designed for use in large platform scales, bench scales, counting scales, and check weighing scales. Specifications for the load cell such as rated output, error rates, temperature effects, and overload limits are also provided.
More Related Content
What's hot
ASC/DSC SELF-ALIGNING SET
The document describes ASC/DSC self-aligning accessories from VPG Sensors for weighing applications. The accessories provide self-aligning constructions for truck, rail, and silo scales with capacities from 30-50 tons. They are designed to ensure load cells are placed vertically and perpendicular to mounting surfaces without stay or check rods. Hardened corrosion resistant steel is used on all mount parts for long-term reliability.
92-93
This document provides specifications and information for Vishay Precision Group's Model 92/93 compression load cell. The load cell has capacities of 50k lbs and 100k lbs, is constructed of stainless steel, hermetically sealed, and has environmental protection of IP68. It is designed for compression applications such as in silos, tanks, hoppers, and scales. Dimensions, specifications, ratings, and mounting instructions are provided. A legal disclaimer is also included.
9123/5123 MOUNT
This document contains three summaries:
1. The document describes a 9123/5123 self-aligning mount and accessories for load cells, including a rocker pin design that allows for horizontal movement and easy installation/replacement of load cells. Materials are hardened and stainless steel is an option.
2. Dimensions and specifications are provided for mounts and feet for different weight capacities between 0.5-5 tons. Accessories include self-aligning mounts, height adjustable feet, and stay rod assemblies.
3. A legal disclaimer is provided stating that product specifications are subject to change and VPG makes no warranties regarding fitness for particular purposes or applications requiring life-critical or life-sustaining functions
620
This document summarizes a load cell product from Tedea-Huntleigh. It provides specifications for a stainless steel S-type load cell model 620 with capacities ranging from 500 to 5000 kg. It details the load cell's features such as stainless steel construction, IP68 sealing, and approvals. Dimensions, technical specifications, and mounting thread options are provided. The document also includes disclaimer information from Vishay Precision Group.
1410
The document describes the Model 1410 load cell, which was specifically designed for use in rotary filling machines. It has several advantages over conventional load cells for this application, including dramatically reduced settling times of less than 300 ms, high resistance to side loads and centrifugal forces, and effective isolation of base vibrations. These features allow for higher machine speeds and throughput without loss of accuracy. The load cell has two mounting options and is rated for capacities from 10-30 kg.
Trusted performance
This document summarizes the features and benefits of the Gore Excluder AAA Endoprosthesis. It has over 15 years of experience with over 190,000 devices distributed, proven durability backed by clinical and commercial data, and allows for more opportunities to optimize the infrarenal seal with an intuitive repositionable delivery system. Users can learn more at the provided website.
65058S
This document describes the Sensortronics Model 65058S stainless steel, welded seal double-ended shear beam load cell. It has the following key features:
- Rated capacities from 10,000 to 100,000 pounds
- Stainless steel welded seal construction provides protection to IP68 standards
- Insensitive to side loads and bending moments
- Integral conduit adapter and additional sense wires for temperature compensation
1142
This document summarizes information about the Tedea-Huntleigh Model 1142 single-point stainless steel load cell. It provides key details about the load cell's features, specifications, applications, description, and dimensions. The load cell has a capacity range of 10-150kg, is constructed of stainless steel, and is intended for use in platform, bench, counting, and other scales. It has an IP66 environmental protection rating and optional ATEX hazardous area approval.
9102 MOUNT
This document provides a legal disclaimer notice for Vishay Precision Group. It states that all product specifications and data are subject to change without notice. It disclaims any liability for errors in product information and specifies that the product specifications do not modify the standard terms of purchase. It also disclaims implied warranties and liability for damages arising from application or use of products not expressly designed for life-saving applications. The notice specifies that product names and markings may be trademarks of their respective owners.
380
This document summarizes a co-planar beam load cell model 380 from Tedea-Huntleigh. It has a capacity range of 7.5-250 kg, is only 2.5-8 mm high to allow for a very low profile, and is made of aluminum with IP65 protection. It is designed for use in various low profile scale applications like personal, medical, postal, and aircraft baggage scales. Dimensions and specifications are provided for the different load cell models.
SHBxR
This document summarizes the specifications and features of the SHBxR single-ended load beam model. Key details include:
- Capacities range from 5-500 kg
- Fully welded stainless steel construction certified to various standards including OIML and NTEP
- Sealed IP66 and IP68 rating suitable for harsh environments
- Optional ATEX and FM certification for explosive atmospheres
- Dimensions and specifications provided
DSC
This document summarizes specifications for a digital compression load cell model DSC. It can measure loads between 30-50 tons, has an IP66/IP68 sealed stainless steel construction, digital RS-485 interface, accurate to OIML R-60 class C3/C4, operating temperature of -40°C to 80°C, and is suitable for weighbridges and process weighing applications. The load cell has various performance specifications including accuracy, temperature coefficients, excitation voltage, and maximum cable length.
60058
This document summarizes information about the Sensortronics Model 60058 double-ended shear beam load cell. It has a rated capacity of 5,000 to 100,000 pounds or 2.3 to 45 metric tons. It is constructed of nickel-plated alloy steel to resist corrosion. It has an IP67 rating making it suitable for outdoor use and high-pressure wash down. Its high accuracy and capacity make it suitable for truck, rail, tank, bin and silo weighing applications.
KOF-K Kosher Cert_shandong sanwei
This document is a kosher certificate from Kof-K Kosher Supervision certifying four soy protein products - Concentrated Soy Protein, Soy Protein, Textured Soy Protein, and Textured Soy Protein Concentrate - produced by Shandong Sanwei Soybean Protein Co., Ltd. in China as kosher. The certificate provides the product names, kosher status as parve, and unique ID numbers for each product and is valid through July 31, 2016.
792
The document summarizes a compression load cell model 792 produced by Vishay Revere.
The load cell has a stainless steel construction, is hermetically sealed to IP68 standards for harsh environments, and has capacities ranging from 50 to 200 kilopounds. It is designed for compression applications such as scales, silos, and hoppers where long-term accuracy and reliability are required.
LOC
This document summarizes a low profile off-center single-point load cell model called the LOC. It provides key specifications of the load cell such as its capacities ranging from 5kg to 1000kg, accuracy classes, construction of anodized aluminum, environmental sealing of IP66, and operating temperature range of -20°C to +60°C. The document also contains dimensional drawings, wiring diagrams, and notices regarding disclaimers and trademarks.
65016-TWA
This document summarizes specifications for the Sensortronics Model 65016-TWA tank weighing assembly load cell. It has a capacity range of 1,000 to 75,000 pounds, mounts directly to floors or structures, and is self-checking with provisions for thermal expansion. It provides high accuracy even with agitated loads and is rated for use in hazardous environments. Dimensions and technical specifications are provided.
Certificate CM20069 20150721
This certificate confirms that the K3T Wall Panel System complies with specific requirements of the Australian Building Code. The prefabricated wall panel system is made from panels that are assembled onsite to form walls. The panels are mechanically fixed to the floor structure and each other with jointing components. The certificate is issued by SAI Global and is valid until 20/07/2018, subject to the conditions that the panels must be installed according to the manufacturer's guidelines, have individual structural analysis, and be covered with an exterior finish.
Case 21 f xt compact wheel loader service repair manual
This document is a service manual for compact wheel loaders. It contains sections on the engine, four-wheel drive system, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, and electrical systems. It also includes sections on the front loader and bucket as well as the platform, cab, bodywork, and decals.
9123
The document provides information on the Model 9123 single-ended beam load cell from Revere. It lists key features such as capacities from 500kg to 5000kg or 1k lbs to 20k lbs. It describes the low profile, IP67 sealing, and stainless steel construction. Dimensional drawings and specifications are provided for the load cell.
What's hot (20)
Case 21 f xt compact wheel loader service repair manual
Case 21 f xt compact wheel loader service repair manual
Similar to 220 SILO MOUNT
93006
This document summarizes a single-point stainless steel load cell model 93006. It has a capacity range of 10-60 kg and is constructed of stainless steel. It is designed for direct mounting in retail, bench, and counting scales. Its stainless steel construction makes it suitable for corrosive and wet environments. It provides specifications for the load cell such as rated output, tolerance, temperature range, material, and protection level. The document also includes a legal disclaimer for all product specifications.
92006
This document provides information about the Model 92006 single-point alloy steel load cell from Sensortronics. It can measure loads between 100 to 1500 kg and features alloy steel construction, IP66 protection, and optional stainless steel construction. It is designed for use in large platform scales, bench scales, counting scales, and check weighing scales. Specifications for the load cell such as rated output, error rates, temperature effects, and overload limits are also provided.
327
This document provides specifications for the Tedea-Huntleigh Model 327 compact tension/compression load cell. It can measure up to 550 lbs in tension or compression. It is constructed of anodized aluminum and has an IP65 rating. It is suitable for small scale applications where minimal installation height is required such as hanging scales or general force measurement. Dimensions and specifications are provided, along with wiring diagrams.
220
This document provides information about the Tedea-Huntleigh Model 220 high accuracy compression load cell. It includes specifications for the load cell such as capacities ranging from 5-50 tons, IP68 protection, optional hazardous area approval, applications including truck scales and silos, and dimensions. It also notes the load cell has approval to OIML R60 and 6000 divisions and includes wiring and legal disclaimer information.
91002
This document summarizes a load cell model 91002 designed for crane scale and hanging scale applications. It has the following key features:
- Capacity of 1.5 to 30 tons
- Made of alloy steel with integrated overload protection for both tension and compression
- Includes a cable and allows direct mounting of a weight indicator
- Has an IP67 rating for harsh environments
1006
This document summarizes a load cell model 1006 produced by Tedea-Huntleigh. It is an aluminum single-point load cell with capacities between 2-5 kg designed for direct mounting in low capacity scales. It offers high precision and performance in a small size, making it suitable for applications like postal scales, counting scales, and general purpose weighing scales. The document provides specifications, dimensions, and other technical details of the load cell.
65114
The document summarizes a stainless steel, single-column compression load cell model 65114 for weighing applications such as truck scales, tanks, bins, and hoppers. It has a rated capacity of 50,000 to 100,000 pounds or 25 to 50 metric tons. The load cell features stainless steel welded seal construction, IP67 environmental protection rating, optional fully hermetic sealing, and approval for legal-for-trade applications. It is designed for use in rugged outdoor environments.
1430
The document provides information about Tedea-Huntleigh's Model 1430 damped load cell for rotary filling machines. It has capacities of 3 kg, 17 lbs, and 23 lbs and is constructed of stainless steel. The load cell is designed to reduce weighing errors from dynamic forces on rotary liquid filling machines and can operate at rotational speeds up to 13 rpm at a 1 meter radius. It has adjustable viscous damping for shorter settling times and faster machine cycles.
HOC
This document summarizes a high capacity off-center single-point load cell model HOC from Celtron. It has capacities of 750, 1000, and 2000 kg. It is fully sealed and side mount construction. It is designed for platform and hanging scales. It provides excellent protection against moisture. It has specifications including accuracy class, capacities, rated output, temperature range, safe overload rating and more.
SHBxR MOUNT
This document summarizes a technical document about a self-aligning mount and accessories for load cells. The mount allows for horizontal movement of the load cell and can be installed and removed after installation. It provides weighing solutions for various applications like process control and batch weighing. Key features include capacities from 5-500kg and use of hardened materials on load bearing surfaces. Dimensions and additional information on accessories like stay rods are also provided.
1002
This document summarizes the specifications and features of the Tedea-Huntleigh Model 1002 aluminum single-point load cell. Key points include:
- It has capacities from 0.5-20 kg and is suitable for small scales and grocery scales.
- The load cell is made of aluminum, has IP66 protection, and a single-point 200 x 200 mm platform.
- Optional 1000-ohm strain gages make it suitable for battery-powered equipment.
- Typical applications include packing machines, filling machines, and low-force medical applications.
9203
This document summarizes a double-ended beam load cell model 9203 produced by Revere. It has capacities from 1k to 75k lbs and is made of stainless steel. It measures force through a center-loaded shear beam design which makes it less sensitive to off-center forces. It provides electrical outputs proportional to the measured force.
MBB
The document provides information on Vishay Precision Group's Miniature Bending Beam load cell model MBB. It lists the model's key features such as available capacities from 50 to 250 lbs and an IP66 sealing rating. It also provides the model's specifications including accuracy, rated output, temperature range, safe overload limit, and construction materials. The legal disclaimer at the end notes that all specifications are subject to change without notice and disclaims liability and warranties.
9803
The document is a technical specification sheet for Vishay Precision Group's Model 9803 Double-Ended Beam Load Cell. It describes the key features and specifications of the load cell, which include capacities from 25k to 75k lbs, IP67 environmental protection, stainless steel material, NTEP class IIIL certification, and optional FM approval for explosive atmospheres. Dimensions and technical specifications are provided for the load cell, including accuracy, temperature performance, load limits, and mounting instructions.
1042
This document summarizes a low profile aluminum load cell model 1042. It has the following key features:
- Capacities from 1-200 kg
- Aluminum construction with IP66 protection rating
- Single point mounting on platforms up to 400x400mm
- Intended applications include bench scales, counting scales, and grocery scales.
SEB
This document summarizes information about the Celtron Model SEB single-ended beam load cell. It lists the key features such as capacities from 500 kg to 2.5T and OIML C3 approval. Application examples include truck scales, silo weighing, and packaging machines. Dimensional drawings and specifications are provided, including accuracy, temperature range, and overload limits. A disclaimer notice is also included.
MDB
This document contains disclaimers and legal notices from Vishay Precision Group regarding product specifications and liability. It states that all product information and specifications can change without notice, and disclaims liability for errors, inaccuracies, or changes to specifications. It also disclaims warranties or guarantees for specific applications and indemnifies VPG for damages resulting from unsafe uses of products not expressly designed for life-critical applications. The notice serves to inform customers that they are responsible for validating product suitability for their intended use.
3520
This document provides information about the Tedea-Huntleigh Model 3520 Stainless Steel Shear Beam Load Cell. It has capacities from 500-2000 kg, is constructed of stainless steel, and is sealed to IP67. It is designed for use in low profile platforms, pallet scales, tank and silo weighing, and food industry platforms. The load cell has high immunity to shock or side loading and high accuracy up to 6000 divisions. It provides a low profile design ideal for modern industrial scales.
60040
This document provides information about the Sensortronics Model 60040 low profile bending beam load cell. It can measure loads between 25 to 500 pounds in tension or compression. It has an IP65 rating and approval for use in hazardous environments. The load cell is compact at 1.34 inches long and is commonly used in platform scales, conveyor scales, and other process weighing applications. Key specifications of the load cell such as rated capacity, accuracy, temperature range, and output signal are also listed.
614
The document summarizes a Model 614 tension-compression load cell produced by Tedea-Huntleigh. It provides key specifications of the load cell such as its capacities ranging from 50-500 kg, aluminum construction, IP67 protection rating, 6-wire circuit, and operating temperature range. The load cell is suitable for various weighing applications including hopper scales, belt weighing, material testing machines, and dynamometers. Dimensional drawings and additional technical specifications of the load cell are also included.
220 SILO MOUNT
- 1. Technical contact: vpgt.americas@vpgsensors.com, vpgt.asia@vpgsensors.com, and vpgt.emea@vpgsensors.com Tedea-Huntleigh www.vpgtransducers.com 1 Model 220 Silo Mount Document No.: 12028 Revision: 20-Jan-2015 Heavy Duty Silo Mount for the 220 Load Cell FEATURES • 5, 10, 20 and 30T capacity • Low profile • Tolerant of angular misalignment • Stainless steel mounting option • Jacking support system • Lift-off protection • Allowance for thermal expansion APPLICATIONS • Silo mount • Tank weighing • Hopper weighing DESCRIPTION The 220 Silo Mount is specifically designed for the support of tanks, silos, and hoppers, making it ideal for indoor or outdoor process control applications when high accuracy weighing is demanded. The Silo Mount is designed to support a uniformly distributed load and is capable of tilting through a maximum of ±3° from vertical. The Silo Mount forms a compact assembly offering simple installation which is rugged and tolerant of heavy Heavy Duty Silo Mount for the 220 Load Cell industrial environments. Heavy gauge steel construction provides a rigid, robust load cell mount for high accuracy and prolonged life. An earth strap with fixing bolts is provided. The Silo mount provides a unique jacking support system which allows the mounts to be installed in the raised position without the load cells, this aids the installation, and preventing accidental damage of the load cells. Lift-off protection and an allowance for thermal expansion of the weighing vessel is also incorporated into the mount design. For specifications refer to Model 220. OUTLINE DIMENSIONS in millimeters CAPACITY A B C D ØE H J 5 and 10T 127 203 90 170 18 107 118 20 and 30T 152 245 115 208 24 148 156 J-MOUNTINJACKEDUPPOSITION H Cctrs EARTH STRAP ATTACHMENT BOLTS (2 supplied) ØE x 8pl AA A B D ctrs
- 2. Vishay Precision Group, Inc. www.vpgsensors.com 1 Legal Disclaimer Notice Document No.: 63999 Revision: 15-Jul-2014 Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. You should ensure you have the current version of the relevant information by contacting VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of VPG. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale. Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Copyright Vishay Precision Group, Inc., 2014. All rights reserved. Disclaimer Legal Disclaimer Notice