15W Powerful Laser 1064nm Invisible Laser Spot
•Download as DOCX, PDF•
0 likes•2 views
This is a 1064nm 15W high power infrared laser. An aluminum heat sink is installed under the laser module, which can effectively extend the continuous working time. The radiator is equipped with two cooling fans. There is a small power interface on the side of the data cable close to the laser head for the cooling fan. In addition, the Lock crystal head cannot be pulled out. External signal Mod Input, no need to connect in CW mode. The IR laser supports 3 working modes: CW/TTL/Analog.
Report
Share
Report
Share
Recommended
760nm 1500mW All-in-one Fiber Coupled Laser
It is a 760nm near infrared fiber coupled laser system. The laser power supply and laser output part are integrated in one chassis. There is a PC/M button on the back of the laser, the default is 'M' mode, that is, manual mode. 'PC' mode is software control mode, users can add this function. The Modulation interface on the back is used to connect 0~10KHz modulation signal. When there is no signal input, it is CW continuous working mode.
1550nm 10mW 1MHz Narrow Linewidth Fiber Laser
1550nm 1MHz narrow linewidth fiber laser is a high-precision, high-performance optical device. It uses optical fiber as the gain medium and generates a laser with a wavelength of 1550 nanometers through the excitation of rare earth elements. It has an extremely narrow linewidth (1MHz), thus ensuring high frequency stability and narrow bandwidth characteristics. This laser has important applications in spectral analysis, optical interference, fiber-optic communication and other fields, and can provide high-resolution and accurate measurement results. At the same time, its high beam quality is suitable for industrial fields such as precision machining and laser cutting. In short, the 1550nm 1MHz narrow linewidth fiber laser is a versatile, high-performance light source that can meet the needs of various precision measurements and industrial applications.
375nm 1-30mW UV Laser Coupled PM Fiber Output
This is a 375nm 30mW polarization-maintaining fiber-coupled laser. Its fiber is pluggable. When installing the fiber, pay attention to align the bayonet.
The laser output power is adjustable from 1 to 30mW. This laser supports CW continuous operation and TTL modulation operation modes, and is equipped with a modulation signal line. When Modulation is connected to an external signal, the laser automatically enters TTL modulation mode.
1550nm 3~200ns Pulse width Nanosecond Fiber Laser
The 1550nm 10kW pulsed nanosecond fiber laser is a shining star in modern industrial technology. Its high power output and precise nanosecond pulse control make it an ideal choice for material processing, scientific research experiments and other fields. With its unique fiber structure, this laser achieves high efficiency, long life and stability, bringing revolutionary changes to industrial production. In the future, it will continue to lead the new trend of laser technology and contribute to scientific and technological progress and industrial development.
980nm 500mW Single-mode TEM00 Semiconductor Laser
In today's laser technology field, the 980nm 500mW TEM00 semiconductor laser has become the focus of scientific researchers and technicians with its unique optical properties and wide application prospects. This laser provides strong technical support for research and applications in many fields with its high-precision and high-efficiency laser output.
C+L Band 26dBm 400mW Erbium-doped Fiber Amplifier
Erbium doped fiber amplifier (EDFA) is a high performance, small size of the fiber amplifier products. The internal use of stability high power semiconductor laser, the high stability of WDM, isolator, and high gain erbium-doped fiber. The product has the advantages of high reliability, high power output, high gain and low noise.
It is a C+L Band 26dBm EDFA Amplifier.The wavelength Range is 1528~1563nm & 1570~1603nm. The EDFA supports two working modes, ACC and APC, and the two working modes can be switched. In APC mode, the output power can be adjusted. In ACC mode, the operating current can be adjusted. Our desktop EDFA can be controlled by buttons. PC control software can be connected through RS232 serial port.
1550nm 10KW Peak Power Pulse Nanosecond Fiber Laser
What our laboratory introduces today is a 1550nm 10kW nanosecond pulse fiber laser.
First, let's take a look at the wavelength characteristics of the 1550nm nanosecond fiber laser. 1550nm is located in the infrared spectrum range and belongs to near-infrared light. Laser of this wavelength shows excellent transmission performance in optical communications, which can effectively reduce fiber loss and improve communication efficiency. At the same time, in the fields of medical treatment and material processing, the 1550nm laser has strong penetration and can achieve precise treatment of deep tissues and fine processing of high-hardness materials.
1550nm 200MHz Fiber Coupled Acousto-Optic Modulator
This is a 1550nm fiber-coupled acousto-optic modulator with a driver. The 1550nm acousto-optic modulator is an external modulation technology, and the acousto-optic device that controls the intensity of the laser beam is usually called an acousto-optic modulator. The 1550nm AOM has the advantages of high modulation extinction ratio and high power withstand, and is widely used in the field of optical fiber sensing.
Recommended
760nm 1500mW All-in-one Fiber Coupled Laser
It is a 760nm near infrared fiber coupled laser system. The laser power supply and laser output part are integrated in one chassis. There is a PC/M button on the back of the laser, the default is 'M' mode, that is, manual mode. 'PC' mode is software control mode, users can add this function. The Modulation interface on the back is used to connect 0~10KHz modulation signal. When there is no signal input, it is CW continuous working mode.
1550nm 10mW 1MHz Narrow Linewidth Fiber Laser
1550nm 1MHz narrow linewidth fiber laser is a high-precision, high-performance optical device. It uses optical fiber as the gain medium and generates a laser with a wavelength of 1550 nanometers through the excitation of rare earth elements. It has an extremely narrow linewidth (1MHz), thus ensuring high frequency stability and narrow bandwidth characteristics. This laser has important applications in spectral analysis, optical interference, fiber-optic communication and other fields, and can provide high-resolution and accurate measurement results. At the same time, its high beam quality is suitable for industrial fields such as precision machining and laser cutting. In short, the 1550nm 1MHz narrow linewidth fiber laser is a versatile, high-performance light source that can meet the needs of various precision measurements and industrial applications.
375nm 1-30mW UV Laser Coupled PM Fiber Output
This is a 375nm 30mW polarization-maintaining fiber-coupled laser. Its fiber is pluggable. When installing the fiber, pay attention to align the bayonet.
The laser output power is adjustable from 1 to 30mW. This laser supports CW continuous operation and TTL modulation operation modes, and is equipped with a modulation signal line. When Modulation is connected to an external signal, the laser automatically enters TTL modulation mode.
1550nm 3~200ns Pulse width Nanosecond Fiber Laser
The 1550nm 10kW pulsed nanosecond fiber laser is a shining star in modern industrial technology. Its high power output and precise nanosecond pulse control make it an ideal choice for material processing, scientific research experiments and other fields. With its unique fiber structure, this laser achieves high efficiency, long life and stability, bringing revolutionary changes to industrial production. In the future, it will continue to lead the new trend of laser technology and contribute to scientific and technological progress and industrial development.
980nm 500mW Single-mode TEM00 Semiconductor Laser
In today's laser technology field, the 980nm 500mW TEM00 semiconductor laser has become the focus of scientific researchers and technicians with its unique optical properties and wide application prospects. This laser provides strong technical support for research and applications in many fields with its high-precision and high-efficiency laser output.
C+L Band 26dBm 400mW Erbium-doped Fiber Amplifier
Erbium doped fiber amplifier (EDFA) is a high performance, small size of the fiber amplifier products. The internal use of stability high power semiconductor laser, the high stability of WDM, isolator, and high gain erbium-doped fiber. The product has the advantages of high reliability, high power output, high gain and low noise.
It is a C+L Band 26dBm EDFA Amplifier.The wavelength Range is 1528~1563nm & 1570~1603nm. The EDFA supports two working modes, ACC and APC, and the two working modes can be switched. In APC mode, the output power can be adjusted. In ACC mode, the operating current can be adjusted. Our desktop EDFA can be controlled by buttons. PC control software can be connected through RS232 serial port.
1550nm 10KW Peak Power Pulse Nanosecond Fiber Laser
What our laboratory introduces today is a 1550nm 10kW nanosecond pulse fiber laser.
First, let's take a look at the wavelength characteristics of the 1550nm nanosecond fiber laser. 1550nm is located in the infrared spectrum range and belongs to near-infrared light. Laser of this wavelength shows excellent transmission performance in optical communications, which can effectively reduce fiber loss and improve communication efficiency. At the same time, in the fields of medical treatment and material processing, the 1550nm laser has strong penetration and can achieve precise treatment of deep tissues and fine processing of high-hardness materials.
1550nm 200MHz Fiber Coupled Acousto-Optic Modulator
This is a 1550nm fiber-coupled acousto-optic modulator with a driver. The 1550nm acousto-optic modulator is an external modulation technology, and the acousto-optic device that controls the intensity of the laser beam is usually called an acousto-optic modulator. The 1550nm AOM has the advantages of high modulation extinction ratio and high power withstand, and is widely used in the field of optical fiber sensing.
395nm 2000mW UV Fiber Coupled Laser System
As can be seen from the video, this is a fiber optic coupling device, which is a multi-mode fiber and the fiber is pluggable. The coupling optical fiber can be customized. The one used here is 100μm, 2m in length, and the interface is FC/PC. There is a buckle on the interface. When installing the optical fiber, insert the optical fiber into the buckle and tighten it.
1550nm 37dBm 5W SM Fiber Laser Source Benchtop
The one shown in our laboratory today is a 1550nm infrared single-mode fiber coupled laser. This is a desktop laser, and the output power can be adjusted directly through the buttons on the panel. The output power is adjustable with an adjustment range of 0.5~5W. The adjustment accuracy is 1mW. The laser can also be controlled through software, and the communication interface is RS232.
1550nm 200MHz Fiber Coupled AO Modulator
This is a 1550nm 200MHz Fiber Coupled AOM with Driver. It is equipped with single-mode fiber, and polarization-maintaining fiber can also be customized. The radio frequency interface is SMA. We provide customized AOM service, different working wavelength and RF frequency can be customized. The rise/fall time of this modulator is 10ns. Let's check it now.
637nm 15W High Power Semiconductor Laser System
It is a 637nm 15W red laser system. The high-power laser generates a lot of heat when it works, and a heat sink is added at the bottom of the laser module. The radiator is equipped with 3 fans. When the laser is turned on, be careful not to cover the front and rear to avoid affecting the heat dissipation performance.
37dBm 5W High Power Er-doped Fiber Amplifier
High power erbium doped fiber amplifier (EYDFA-HP-BA), based on amplification technology of double clad erbium doped fiber, unique optical packaging technology, and with reliable hardware light path protection design, realized high power laser output in C band or L band, It has the advantages of high gain and low noise, and can be widely used in CATV, optical fiber communication, laser radar, etc..
2023 Latest High Power EDFA Fiber Amplifier.docx
This is a C-Band Erbium Doped Fiber Amplifier, high gain and low noise. It is the latest style of 2023, with a silver shell. The heat sink of the fiber amplifier is upward. This is Polarization-Maintaining Erbium-Doped Fiber Amplifier, SM Fiber EDFA can also be customized.
60W IR Invisible Laser 915nm Strong Laser
The power of 60W is very high power, which can instantly ignite the cardboard. Be sure to pay attention to safety when operating, the operator must wear laser protective glasses, and the laser cannot point to other people or other flammable objects.
2023 Newest! Touch Screen Laser System
532nm DPSS green laser is made features of good beam profile, ultra compact, long lifetime and easy operating, which is widely used in collimation, laser medical treatment, scientific experiment, optical instrument, laser display, etc.
1550nm Narrow Line-width DFB Laser PM1550 Fiber Output
The 1550nm band single-wavelength laser (low power) adopts high-stability semiconductor laser chip, polarization maintaining fiber output, professionally designed drive and temperature control circuit control to ensure the safe and stable operation of the laser, and can provide desktop or modular packaging.
808nm 100mW IR Laser System PM Fiber Output
This is 808nm 100mW infrared laser system coupled polarization-maintaining fiber. The working voltage is AC 90~240V and supports wide range voltage. Its laser power can be adjusted from 0~100mW, and it supports two working modes of CW/Modulation.
C+L Band SM ASE Broadband Light Source
This is a benchtop ASE broadband light source with button control. This is the broadband light source of C+L Band, the wavelength range is 1528~1603nm. The power can be adjusted, and the adjustment accuracy is 1mW. The single-mode fiber is pluggable, and the interface is easily damaged. The fiber here is fixed and cannot be plugged.
37dBm 5W High Power YDFA SM Fiber Amplifier
It's a high power Ytterbium-doped optical amplifier, its output power is 37dBm. And high power YDFA built-in 3 cooling fans. The software control function can be customized, and the default is button control. The current working mode, current and output power are displayed on the front display.
https://www.civillaser.com/index.php?main_page=product_info&products_id=3049
40dBm YDFA High Power Yb-doped PM Fiber Amplifier Benchtop.doc
It's a high power polarization maintaining ytterbium-doped optical amplifier. Civil Laser's 10W high power YDFA include a 'Monitor' fiber. The software control function can be customized, and the default is button control. The working current or output power can be adjusted by the button.
It supports APC and ACC two working modes can be switched. In APC mode, the output power can be adjusted. In ACC mode, the working current can be adjusted.
Software Control Laser Output 520nm 22W Fiber Laser
This is 520nm high power green fiber laser system. This laser adds software control. Use RS232-USB to connect the laser and computer software.The laser output power can be adjusted by software. Using EasyHost software, you can also write your own programs to control the lower computer according to the communication protocol.
The output power is 22W is a high-power laser, we added a heat sink under the laser module. The heat sink is composed of aluminum sheets and 3 cooling fans. Its fiber is pluggable, here we choose a 1000μm fiber. Let's check it now.
1650nm 600mW Fiber Laser All-in-one System
This is a 1650nm infrared laser. The laser power supply and the laser output part are integrated in one chassis.
1650nm is an infrared invisible laser, we need to use an infrared sensitive film to observe the light spot.
450nm Fiber Output Laser Software Control.docx
Today we are talking about software-controlled laser source. It is 450nm Blue fiber coupled laser source controlled by software. EasyHost is the control software. The connection between the laser and PC software adopts the communication protocol of RS232. The laser supports two working modes: CW/Modulation. When switching to Modulation, an external signal input is required. This is a fiber-coupled laser, and a free-space output laser can also be customized.
2022 The Latest 532nm 10W DPSS Laser system .docx
For high-power lasers, please wear green light protective glasses before operating. The laser cannot be directed at people, and even if the reflected light hits the human eye, it may cause permanent damage. The 532nm DPSS laser needs a warm-up time of about 1 to 3 minutes, and the max power is reached after 1 minute of startup at normal temperature.
1550nm SLD Light Source Fiber Laser Module
SLD broadband light source adopts super radiant semiconductor diode light-emitting chip, which outputs broadband spectrum with low coherence degree and high output optical power spectral density. The operating wavelength can be selected from O, S, C, L and other bands, suitable for optical OCT, optical fiber sensing applications.
561nm 30mW Yellow Green DPSS Laser System
This is a 561nm 30mW DPSS Laser System. 561nm is a relatively special wavelength, and the color of the laser is green to yellow. The transverse film mode is TEM00. There are two working modes available, CW/Modulation.
The laser output power can be adjusted manually. Its maximum output power here is 30mW, and the output power of 1~400mW can be customized. Let's check it now.
532nm VS 520nm Green Laser System.doc
532nm and 520nm are both common green lasers in the laboratory. The difference is that one is a diode pumped solid state(DPSS) laser and the other is a semiconductor laser.
More Related Content
More from Naku Technology Co,. Ltd
395nm 2000mW UV Fiber Coupled Laser System
As can be seen from the video, this is a fiber optic coupling device, which is a multi-mode fiber and the fiber is pluggable. The coupling optical fiber can be customized. The one used here is 100μm, 2m in length, and the interface is FC/PC. There is a buckle on the interface. When installing the optical fiber, insert the optical fiber into the buckle and tighten it.
1550nm 37dBm 5W SM Fiber Laser Source Benchtop
The one shown in our laboratory today is a 1550nm infrared single-mode fiber coupled laser. This is a desktop laser, and the output power can be adjusted directly through the buttons on the panel. The output power is adjustable with an adjustment range of 0.5~5W. The adjustment accuracy is 1mW. The laser can also be controlled through software, and the communication interface is RS232.
1550nm 200MHz Fiber Coupled AO Modulator
This is a 1550nm 200MHz Fiber Coupled AOM with Driver. It is equipped with single-mode fiber, and polarization-maintaining fiber can also be customized. The radio frequency interface is SMA. We provide customized AOM service, different working wavelength and RF frequency can be customized. The rise/fall time of this modulator is 10ns. Let's check it now.
637nm 15W High Power Semiconductor Laser System
It is a 637nm 15W red laser system. The high-power laser generates a lot of heat when it works, and a heat sink is added at the bottom of the laser module. The radiator is equipped with 3 fans. When the laser is turned on, be careful not to cover the front and rear to avoid affecting the heat dissipation performance.
37dBm 5W High Power Er-doped Fiber Amplifier
High power erbium doped fiber amplifier (EYDFA-HP-BA), based on amplification technology of double clad erbium doped fiber, unique optical packaging technology, and with reliable hardware light path protection design, realized high power laser output in C band or L band, It has the advantages of high gain and low noise, and can be widely used in CATV, optical fiber communication, laser radar, etc..
2023 Latest High Power EDFA Fiber Amplifier.docx
This is a C-Band Erbium Doped Fiber Amplifier, high gain and low noise. It is the latest style of 2023, with a silver shell. The heat sink of the fiber amplifier is upward. This is Polarization-Maintaining Erbium-Doped Fiber Amplifier, SM Fiber EDFA can also be customized.
60W IR Invisible Laser 915nm Strong Laser
The power of 60W is very high power, which can instantly ignite the cardboard. Be sure to pay attention to safety when operating, the operator must wear laser protective glasses, and the laser cannot point to other people or other flammable objects.
2023 Newest! Touch Screen Laser System
532nm DPSS green laser is made features of good beam profile, ultra compact, long lifetime and easy operating, which is widely used in collimation, laser medical treatment, scientific experiment, optical instrument, laser display, etc.
1550nm Narrow Line-width DFB Laser PM1550 Fiber Output
The 1550nm band single-wavelength laser (low power) adopts high-stability semiconductor laser chip, polarization maintaining fiber output, professionally designed drive and temperature control circuit control to ensure the safe and stable operation of the laser, and can provide desktop or modular packaging.
808nm 100mW IR Laser System PM Fiber Output
This is 808nm 100mW infrared laser system coupled polarization-maintaining fiber. The working voltage is AC 90~240V and supports wide range voltage. Its laser power can be adjusted from 0~100mW, and it supports two working modes of CW/Modulation.
C+L Band SM ASE Broadband Light Source
This is a benchtop ASE broadband light source with button control. This is the broadband light source of C+L Band, the wavelength range is 1528~1603nm. The power can be adjusted, and the adjustment accuracy is 1mW. The single-mode fiber is pluggable, and the interface is easily damaged. The fiber here is fixed and cannot be plugged.
37dBm 5W High Power YDFA SM Fiber Amplifier
It's a high power Ytterbium-doped optical amplifier, its output power is 37dBm. And high power YDFA built-in 3 cooling fans. The software control function can be customized, and the default is button control. The current working mode, current and output power are displayed on the front display.
https://www.civillaser.com/index.php?main_page=product_info&products_id=3049
40dBm YDFA High Power Yb-doped PM Fiber Amplifier Benchtop.doc
It's a high power polarization maintaining ytterbium-doped optical amplifier. Civil Laser's 10W high power YDFA include a 'Monitor' fiber. The software control function can be customized, and the default is button control. The working current or output power can be adjusted by the button.
It supports APC and ACC two working modes can be switched. In APC mode, the output power can be adjusted. In ACC mode, the working current can be adjusted.
Software Control Laser Output 520nm 22W Fiber Laser
This is 520nm high power green fiber laser system. This laser adds software control. Use RS232-USB to connect the laser and computer software.The laser output power can be adjusted by software. Using EasyHost software, you can also write your own programs to control the lower computer according to the communication protocol.
The output power is 22W is a high-power laser, we added a heat sink under the laser module. The heat sink is composed of aluminum sheets and 3 cooling fans. Its fiber is pluggable, here we choose a 1000μm fiber. Let's check it now.
1650nm 600mW Fiber Laser All-in-one System
This is a 1650nm infrared laser. The laser power supply and the laser output part are integrated in one chassis.
1650nm is an infrared invisible laser, we need to use an infrared sensitive film to observe the light spot.
450nm Fiber Output Laser Software Control.docx
Today we are talking about software-controlled laser source. It is 450nm Blue fiber coupled laser source controlled by software. EasyHost is the control software. The connection between the laser and PC software adopts the communication protocol of RS232. The laser supports two working modes: CW/Modulation. When switching to Modulation, an external signal input is required. This is a fiber-coupled laser, and a free-space output laser can also be customized.
2022 The Latest 532nm 10W DPSS Laser system .docx
For high-power lasers, please wear green light protective glasses before operating. The laser cannot be directed at people, and even if the reflected light hits the human eye, it may cause permanent damage. The 532nm DPSS laser needs a warm-up time of about 1 to 3 minutes, and the max power is reached after 1 minute of startup at normal temperature.
1550nm SLD Light Source Fiber Laser Module
SLD broadband light source adopts super radiant semiconductor diode light-emitting chip, which outputs broadband spectrum with low coherence degree and high output optical power spectral density. The operating wavelength can be selected from O, S, C, L and other bands, suitable for optical OCT, optical fiber sensing applications.
561nm 30mW Yellow Green DPSS Laser System
This is a 561nm 30mW DPSS Laser System. 561nm is a relatively special wavelength, and the color of the laser is green to yellow. The transverse film mode is TEM00. There are two working modes available, CW/Modulation.
The laser output power can be adjusted manually. Its maximum output power here is 30mW, and the output power of 1~400mW can be customized. Let's check it now.
532nm VS 520nm Green Laser System.doc
532nm and 520nm are both common green lasers in the laboratory. The difference is that one is a diode pumped solid state(DPSS) laser and the other is a semiconductor laser.
More from Naku Technology Co,. Ltd (20)
1550nm Narrow Line-width DFB Laser PM1550 Fiber Output
1550nm Narrow Line-width DFB Laser PM1550 Fiber Output
40dBm YDFA High Power Yb-doped PM Fiber Amplifier Benchtop.doc
40dBm YDFA High Power Yb-doped PM Fiber Amplifier Benchtop.doc
Software Control Laser Output 520nm 22W Fiber Laser
Software Control Laser Output 520nm 22W Fiber Laser
15W Powerful Laser 1064nm Invisible Laser Spot
- 1. 15W Laser 1064nm Invisible Laser Spot This is a laser system that adjusts the power by adjusting the current. To adjust the current, turn the 'Adjustor' knob clockwise, when the current exceeds the min working current, the Laser indicator turns green, and there is laser output. 'Adjustor' rotates clockwise to the e nd, which is the max working current and the max output power of the laser. In addition, the red STOP button is used for emergency stop, and it is not needed under normal circumstances.
- 2. This is a 1064nm 15W high power infrared laser. An aluminum heat sink is installed under the laser module, which can effectively extend the continuous working time. The radiator is equipped with two cooling fans. There is a small power interface on the side of the data cable close to the laser head for the cooling fan. The IR laser supports 3 working modes: CW/TTL/Analog. The following video demonstrates CW working mode. Let's check it now. Youtube: https://youtu.be/-oBQZTcuKM4 1064nm is invisible to the human eye. We use an infrared photosensitive film to view the light spot.
- 3. Safety reminder: Wear laser safety glasses when operating high-power lasers. Laser irradiation of human eyes and skin is prohibited.