4. Code: 01004004
Faucet adaptor for demostration
Faucet plastic sleeves
Code: 01006101
Faucet plastic sleeve 1/4''
Digital flow meters
Code: 01001201
FM-1 FM-2 filter Monitor time alert~Time/volume
Variants
Code Description
01001201-FM1 Filter Monitor Time alert
The new Filter Monitor is an innovative system to alert when a filter needs to be changed via color-coded
lights at the base of the faucet. The battery-powered FM-2 has five timers for a 5-stage system, as well as a
water volumizer and programmable set-points and alarms for each function, all in a crisp, attractive
housing.
16 July 2018 4/30
5. FEATURES
* A five-stage filter monitor with five independent timers and a tri-color LED faucet indicator disc.
* Works on time (and volume for the FM-2) for up to five stages (can be less).
* The LED indicator disc will illuminate a green, yellow or red light when the water is turned on. The color
indicates the percentage of elapsed time.
* Auto-Off function conserves battery power. The unit shuts off automatically after 5 minutes of non-use.
* The timer counts down in months or days (settings can be modified).
* The volumizer counts up in gallons or liters (settings can be modified).
* Includes an audible alarm (beep).
* Modern design is perfect for any kitchen.
* Installs quickly and easily.
SPECIFICATIONS
Timer Range: 0-999 days/months
Timer Modes: Days or months (default is months)
Volume Range 0-99999 Gallons / Liters
Volume Modes: Gallons (default) or Liters
Volume Accuracy: +/-1% (at typical pressure of ~50-150 psi; low and high pressures may affect accuracy
Settings: One alert per stage, up to five stages
Default Setting: 12 months
Batteries: 2 x AA (included)
Battery Life: approx. 18 months
Base Unit Dimensions: 100 x 63 23 mm (4 x 2.5 x 0.9 in)
Base Unit Weight: 119 g (4.2 oz.) (including batteries)
Flow Sensor Cable Length: 93 cm (36.6 in)
Flow Sensor Fitting Size: 1/4" Quick Connect
LED Faucet Indicator Disc: Works with any non-air gap filter faucet
LED Faucet Indicator Disc Cable Length: 92 cm (36.25 in)
LED Faucet Indicator Disc Dimensions: 4.75 (1 1/4" in.) dia., 8 cm (5/16") hight
Code: 01001202
Meter a bright LED Digiflow 5000V monitoring liters
Variants
Code Description
01001202-01 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 1.000 liters
01001202-02 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 2.000 liters
01001202-03 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 3.000 liters
01001202-04 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 4.000 liters
01001202-05 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 5.000 liters
01001202-06 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 6.000 liters
01001202-07 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 7.000 liters
01001202-08 Meter a bright LED Digiflow 5000V monitoring liters Pre-set at 8.000 liters<br />
Clear indicating of filter status
The DigiFlow 5000V incorporate an advanced microprocessor circuit and precision flow sensor to
accurately monitor filter life. The double-color LED conveniently indicates the status of filter. A built-in audio
device generates an alert alarm when the filter life reaches its end. No external power needed. The
16 July 2018 5/30
6. DigiFlow 5000V can be used with all kinds of under-sink water filters, including installed ones. The DigiFlow
5000V is powered by two AAA alkaline batteries which generally last for more than two years. A built-in
semiconductor memory device automatically stores the last status when battery power runs out.
16 pre-set monitoring capacity options :
1000, 2000, 3000, 4000, 5000, 6000, 7000 and 8000 liters.
Remaining capacity indicating :
Green light blinks 10 times – 100% capacity remaining
9 times – 90% capacity remaining
…………………………………
1 time – 10% capacity remaining
End of life alert :
Red light blinks all the times and an addible alarm is generated when the remaining capacity is 0.
An audible alarm.
Code: 01001203
Digiflow 6000R-L Flow meters LCD volume in liters (50)
Measuring flow capacity of filter
The DigiFlow 6000R is a flow totalizer with LCD display. It displays the accumulated volume flowing
through. Both of the gallon and liter models are available. Accumulated volume displayed up to 99999
gallons and 99999 liters.
Monitoring up to five filter volume capacity
Besides the totalization function, the DigiFlow 6000R is programmable to monitor up to five filters in volume
capacity from 100 to 9900 gallons (gallon model) or 500 to 99500 liters (liter model). The LCD of the
DigiFlow 6000R blinks the filter number and generates an audible alert when the monitoring volume
capacity of the specific filter reaches the end.
The DigiFlow 6000R comes with a 3/ 8” NPT female thread, which is adapted to most of the fittings to
connect with filters.
No external power needed. The DigiFlow 6000R is operated by two AAA alkaline batteries which power
lasts more than one year . The last status data will be automatically memorized when the battery power is
off.
The DigiFlow 6000R is applied for water filters, water dispensers and coolers.
Install Batteries
Slide off the cover case of the battery room, and put into 2 AAA batteries. Then slide the cover case back.
Connecting Fitting
The specification of the DigiFlow 6000R connectors is 3/8” MNPT female. You could use any 3/8” MNPT
male connectors.
Setting Filter Capacity
16 July 2018 6/30
7. Keep pressing DISPLAY button, then press RESET button and release both of the buttons. The
DigiFlow 6000R will go into setting procedure. The digit will blink “FLT 1” four times, then blink “ OFF” to
notice you that the setting procedure is on. Press DISPLAY button to choose the
capacity value. The sequence is OFF - 0 – 100 – 200 – 300 …… 19800 – 19900 – OFF – 0 –100 (gallon
model) and OFF - 0 –500 – 1000 --- 99500 – OFF – 0 – 500 (Liter model). Then press RESET button to
save the filter capacity value.
* If the setting value is “OFF”, the monitor function of the dedicated filter will be disable.
Operating
The DigiFlow 6000R will be automatically turn on when there is water flowing through the sensor. It will
automatically turn off in 10 seconds when there is no water flowing. The DigiFlow 6000R display the total
flowing volume.
Check Filter Remaining Capacity
Press DISPLAY button will display the remaining capacity of each filter. The DigiFlow 6000R will blink the
dedicated filter twice, then blink the remaining capacity twice. For example, “FLT 1”, then“ 988 ltr”, then “
FLT 2” …….. After display all remaining capacity of each filter, the DigiFlow 6000R goes back to display the
total flowing volume.
End o Life Alert
When there is any filter remaining capacity reaches 0 gallon (liter), the buzzer will beep twice and
the DigiFlow 6000R will blink the dedicated filter, for example, like “ FLT 2” to notice user that
the 2nd filter cartridge is in its end of life, and out of function. In the alert status, user press
DISPLAY button is not able to check the remaining capacity of each filter, but to display the total flowing
volume.
After change the dedicated filter cartridge, press RESET button. The remaining capacity of the
dedicated filter cartridge be reset to the original setting value. And the alert status is released.
For example, if user set the capacity of the “FLT 1” and “FLT 2” as 500 gallons and 1000 gallons.
When the total flowing volume reaches 500 gallons, the DigiFlow 6000R will go into alert status,
and blink “ FLT 1 ” when there is water flowing through. However the DigiFlow 6000R will keep
calculate the total flowing volume and monitor the other filter. When user change the 1st filter
cartridge and press RESET button at the total flowing volume 520 gallons. The end of life alert of
the 1st filter cartridge will be at 1020 gallons (520 + 500 gallons).
Low Battery Power Alert
When the battery power lower than normal working level, the buzzer will beep twice to notice and the
battery symbol on the screen will blink to notice user to change the battery. Once the batteries are
replaced, the alert will be released. The data will be kept in memory and stored back when user replace the
batteries.
Code: 01001205
Digiflow 8000T Water meters LCD time/volume in liters (50)
INSTALLING BATTERY
Slide off the cover case of the battery room, and put into 2AAA batteries.Then slide the cover case back.
SETTING CAPACITY AND TIMING
16 July 2018 7/30
8. Keep pressing display button, then press reset button and release both of the buttons. The DigliFlow 8000T
will go into setting procedure. The digit will flash to notice you that the setting procedure is on.
SETTING CAPACITY
Press display button to choose the capacity. The sequence is 0-100-200-300...9800-9900-OFF. Then press
reset button to save the capacity. Then go into Timing setting. *The capacity mode will be disabled when
you choose OFF.
SET TIMING
Press Display button to choose the Timing. The sequence is 0-30-60-90...690-720-OFF. Then press reset
to save the Timing. The setting procedure is completed. *The capacity mode will be disabled when you
choose OFF. **The setting procedure will be terminated, and go back to the original status if there is no
input for 10 seconds.
CONNECTING FITTING
The specification of the DigiFlow8000T connectors is 3/8" MNPT female. You could use any 3/8" MNPT
male connectors.
OPERATING
The DigiFlow 8000T will be automatically on when there is any water flowing through the sensor. It will be
automatically off wen there is no water flowing for 10 seconds.
DISPLAY BUTTON:
Press display button is to display the status of the three modes of the DigiFlow 8000T. Capacity mode:
showing the capacity left. Timing mode; showing the timing left. Flow rate mode: showing the current flow
rate. The sequence is Flow-rate - Timing Capacity...
RESET BUTTON:
Press reset button is to reset the setting to be the last setting.
ALARM - Noticing Alarm
When Capacity is lower than 30 gallons or timing is lower than 7 days, the buzzer will beep once and the
digit will beep once and the digit will flash to notice you to prepare changing the filter cartridge when there is
any water flowing through DigiFlow 8000T or press the display button.
Warning Alarm
When Capacity reaches 0 gallon or Timing reaches 0 day, the buzzer will beep twice and the digit will flash
to notice you to change the filter cartridge when there is any water flowing through Digiflow 8000T or press
the display button.
Low Battery Power Alarm
When the battery power lower than normal working level, the buzzer will beep twice to notice you to change
the battery. The data will be kept in memory when the battery power is run out or battery is removed.
Code: 01001206
Control Box for R.O. System with/with out TDS Meter
16 July 2018 8/30
9. Variants
Code Description
01001206-01 Water meter
01001206-02 Water meter with TDS meter
Mechanical flow meter
Code: 01001101
Water meter at progressive numeration (40)
Variants
Code Description
01001101-01 Water meter at progressive numeration with connectors (40)
01001101-02 Water meter at progressive numeration without connectors (40)
Water's counter at only jet super Dry with dry quadrant.
Quadrant's size: 20mm
* direct reading with 8 roller
* Inlet/Outlet connections: 3/4" male thread
(it is provided with 2 junctions 1/2" male thread
* maximum flow rate: 3,125m3/h
* 360° adjustable quadrant
* classe B-H/A-V
* cold water 30°C
* hot water 90°C
* magnetic dragging
* Work's maximum pressure: 16bar
* anti-magnetic's Device on request
Code: 01001102
Waterminder watermeter auto-block 1/4" (60)
Stop the flow of water to reach the capacity of the filters. Mechanical operation with the pressure of the
water. The Water Minder is programmable from 1 to 6,000 liters, decreasing a notch to every liter of water
past. Of easy use and conduction enough to arm the wheel situated in head to reactivate the system.
* Inlet-outlet : male threaded 1/4''.
16 July 2018 9/30
10. * Dimensions: 9 cm. Ø x 6 cm.
Connectors
Code: 01001001
E.Z. Feed Water Connector ,with Free Degree Nut 3/4''x3/4''
Code: 01001002
E.Z. Feed Water Connector 1/4" - 1/2''x1/2''~3/8''x3/8''
Variants
Code Description
01001002-01 E.Z. Feed Water Connector 1/4" - 1/2''x1/2''
01001002-02 E.Z. Feed Water Connector 1/4" - 3/8''x3/8'' (20)
Code: 01001003
E.Z. Feed Water Connector, with Free Degree Nut 1/4", 3/8" -
3/4''x3/4''
Variants
Code Description
01001003-02 E.Z. Feed Water Connector, with Free Degree Nut 3/8" - 3/4''x3/4'' (10)
16 July 2018 10/30
11. Code: 01001004
E.Z. Feed Water Connector, M.F. 3/4''x3/4''
Code: 01001005
E.Z. Feed Water Connector 1/4" - 3/4''x3/4''
Code: 01001006
E.Z. Feed Water Connector, with Free Degree Nut 1/4" -
1/2''x1/2''~3/8''x3/8''
Variants
Code Description
01001006-01 E.Z. Feed Water Connector, with Free Degree Nut 1/4" - 1/2''x1/2''
01001006-02 E.Z. Feed Water Connector, with Free Degree Nut 1/4" - 3/8''x3/8''
16 July 2018 11/30
13. Variants
Code Description
01008003-01 Double Mounting clip 2"
01008003-02 Double Mounting clip 2,5"
Tube inserts
Code: 01006001
Tube inserts 1/4" ~ 3/8"
Variants
Code Description
01006001-01 Tube insert 1/4''
01006001-02 Tube insert 3/8''
Mini filters for sediment
Code: 01014001
Muddy Filter 1/4" quick fitting
It plays the role to filter large floating materials such as soil and dust contained in water primarily before
water flows into water purifier. The body of filter is transparent so it is easy to check foreign matter filtered in
net and it is easy to clean net too. Although tube is connected to existing water purifier, it is easy to connect
in the middle of tube. The lifespan of existing filter is extended a little more. Transparent part is made of
polycarbonate so there is no worry of damage.
Specification
* Tube size : 1/4" quick fitting * Body : PC * CAP : Acetal (POM) * Max. Pressure : 15~18 bar
(15~18Kg/cm².) * Filter : 25 micron
16 July 2018 13/30
14. TDS regulators
Code: 01010002
TDS adjuster quick fitting 1/4''
Code: 01010003
TDS mixing valve 1/4'' F.
Code: 01010004
TDS mixing valve 1/4'' F. (25)
16 July 2018 14/30
15. Code: 01010005
TDS mixing valve OD stem 1/4''
H2O pressure reducers
Code: 01011001
Pressure gauge 1/4'' ø50 Radial ~ Posterior connections
Variants
Code Description
01011001-01 Pressure gauge 1/4'' ø50 Radial connections (0-10bar/145psi)
01011001-02 Pressure gauge 1/4'' ø50 Posterior connections (0-12bar/174psi)
Code: 01011002
Water pressure reducer 3/8''~1/2'' with gauge coupling
Variants
Code Description
01011002-01 Water pressure reducer 3/8'' F.F. with gauge coupling (30)
01011002-02 Water pressure reducer 1/2'' F. F. with gauge coupling
16 July 2018 15/30
16. Code: 01011003
Water pressure regulator quick fitting 1/4'' (80)
As a valve to adjust pressure, it prevents product damage and water leakage perfectly when water pressure
is significantly high.
It is possible to adjust the pressure of water optionally by adjusting cap area so easier work is available.
It searches for convenience of work by classifying the color of water inlet cap.
It is easier to work because support is attached for fixing with nut.
Be sure to use it for the product using UF filter in order to guarantee stability of UF filter. The pressure of
water shall be less than 3Kg/cm².
Specification
* Tube size : 1/4"
* Body : ACETAL (POM)
* Max. Pressure inlet : 15bar (15Kg/cm².)
* Outlet pressure range: 1~4 bar
Code: 01011004
Water valve pressure limiter quick fitting1/4", 3/8''
(2,7bar/40psi, 4,8bar/70psi)
Features
Connections (01): 1/4” Quick fitting
Connections (02): 3/8” Quick fitting
Connections (03): 1/4” Quick fitting
Adjustment (01): 2,7bar (40psi)
Adjustment (02): 2,7bar (40psi)
Adjustment (03): 4,8bar (70psi)
Flow rate: 15 L/min at 6,9bar (100psi)
Pressure: 20bar (300psi) max.
Temperature Rating: 40°C max.
Variants
Code Description
01011004-01 Water valve pressure limiter quick fitting 1/4" (2,7bar/40psi)
01011004-02 Water valve pressure limiter quick fitting 3/8'' (2,7bar/40psi)
01011004-03 Water valve pressure limiter quick fitting 1/4" (4,8bar/70psi)
16 July 2018 16/30
17. Co2 pressure reducers
Code: 01012001
XS Co2 pressure reducer for rechargeable cylinder
Variants
Code Description
01012001-01 XS Co2 pressure reducer rechargeable cylinder 7 BAR IN: W21,8-14FIL.X1" Key-30 Out: 1/8'' f. thread
01012001-02 XS Co2 pressure reducer rechargeable cylinder 5 BAR IN: W21,8-14FIL.X1" Key 30 Out: 1/8'' f. thread
Galvanic NSF61 food coating
Standard UNI EN ISO 2503
CO2 and N2 Pressure Regulators are Tested singly
Internal high pressure valve in INOX AISI 300
Teflon gasket
Code: 01012002
XS Co2 pressure reducer for disposable and rechargeable
cylinder
Variants
Code Description
01012002-01 XS Co2 pressure reducer for disposable cylinder 7,0 BAR IN: M11x1-Out: 1/8'' f. thread
01012002-02 XS Co2 pressure reducer rechargeable cylinder 7 BAR IN: W21,8-14FIL.X1" Key 30 - Out: 1/4'' f. thread
01012002-03 XS oring replacement IN Co2 for cod. 01012002-01 6,75X1,78X10,31
Galvanic NSF61 food coating
Standard UNI EN ISO 2503
CO2 and N2 Pressure Regulators are Tested singly
Internal high pressure valve in INOX AISI 300
Teflon gasket.
16 July 2018 17/30
18. Code: 01012003
XS Co2 pressure reducer ACME Cylinder connection
* Low pressure gauge 4.5 bar rear connection * Handle for easy disassembly * 304 AISI Stainless Steel *
IN: ACME thread * OUT: 1/8" NPTF F. thread
Code: 01012004
SR-02 Co2 pressure reducer for disposable cylinder
Variants
Code Description
01012004-01 SR-02 Co2 pressure reducer for disposable cylinder knob straight 11x1 connection
01012004-02 SR-02 90 Co2 pressure reducer for disposable cylinder knob to 90° 11x1 connection
01012004-03 SR-02 replacement gasket for cylinder fitting
SR-02 has everything you need for your safety and always to have under control the operating parameters
of your installation of CO2 and N2.
* Material Aluminum HR
* Treatment Anodized
* Input Pressure From 1 to 160 bar
* Output Pressure Adjustable
* Gauges output pressure
* Safety Overpressure (Pop-Off)
* In Female thread: 11x1 (disposable cylinder) or 21.8X1/14 "(rechargeable cylinder) via adapter extension.
* Out female thread: 1/8"
* Flow Rate 15 l/min.
16 July 2018 18/30
19. Code: 01012005
SR adapter extension Co2 pressure regulator for rechargeable
cylinders M11x1 a W21.8x1/14”
From M11x1 to W21.8x1/14 "
With this adapter, it is possibile to use the pressure reducer with rechargeable cylinders.
Code: 01012006
SR-02 Co2 pressure reducer for rechargeable cylinder
Variants
Code Description
01012006-02 SR-02 Co2 pressure reducer for rechargeable cylinder knob to 90°
SR-02 has everything you need for your safety and always to have under control the operating parameters
of your installation of CO2 and N2.
* Material Aluminum HR
* Treatment Anodized
* Input Pressure From 1 to 160 bar
* Output Pressure Adjustable
* Gauges output pressure
* Safety Overpressure (Pop-Off)
* In Female thread: 11x1 (disposable cylinder) or 21.8X1/14 "(rechargeable cylinder) via adapter extension.
* Out female thread: 1/8"
* Flow Rate 15 l/min.
16 July 2018 19/30
20. Code: 01012007
SR-02 ADV Co2 pressure reducer for rechargeable cylinder
21.8X1/14” (2 gauges)
SR-02 ADVanced has everything you need for your safety and always to have under control the operating
parameters of your installation of CO2 and N2. It gives you protection against overpressure and pressure
fluctuations in output. It makes you check the filling of the cylinder. Lets you precisely adjust the pressure of
use. The two pressure gauges indicate the charge of the cylinder and the outlet pressure of CO2.
* Material Aluminum HR
* Treatment Anodized
* Input Pressure From 10 to 160 bar
* Output Pressure 0-6 bar (Adjustable)
* Gauges DN 40 low pressure [0-10 bar], Hight pressure [0-250 bar]
* Safety Overpressure (Pop-Off)
* In Female thread: 21.8X1/14"(rechargeable cylinder)
* Out female thread: 1/8"
* Flow Rate 15 l/min.
* Dimensions: 74X130 Ø38mm
Code: 01012008
SR-02 90 Co2 pressure reducer ACME Cylinder connection
Pressure reducer low-profile with connection ACME. This regulator requires an height only 2 cm (0.78 inch)
allowing the use of ACME cylinders in very small spaces. Mounting and dismounting from the cylinder will
not require tools.
* Material Aluminum HR
* Treatment Anodized
* Input Pressure From 1 to 160 bar
* Output Pressure Adjustable 0-5,5 bar
* Gauges output pressure
* Safety Overpressure (Pop-Off)
* In Female thread: ACME
* Out female thread: 1/8"
* Flow Rate 15 l/min.
16 July 2018 20/30
21. Code: 01012009
SR adapter extension Co2 pressure regulator from ACME to
M11x1
With this adapter, it is possibile to use the pressure reducer from rechargeable cylinders to disposable
cylinders.
Code: 01012010
SR-02 Co2 pressure reducer for rechargeable cylinder knob
straight
Variants
Code Description
01012010-01 SR-02 Co2 pressure reducer for rechargeable cylinder knob straight
01012010-02 SR-02 replacement gasket for cylinder fitting
SR-02 has everything you need for your safety and always to have under control the operating parameters
of your installation of CO2 and N2.
* Material Aluminum HR
* Treatment Anodized
* Input Pressure From 1 to 160 bar
* Output Pressure Adjustable
* Gauges output pressure
* Safety Overpressure (Pop-Off)
* In Female thread: 11x1 (disposable cylinder) or 21.8X1/14 "(rechargeable cylinder) via adapter extension.
* Out female thread: 1/8"
* Flow Rate 15 l/min.
16 July 2018 21/30
22. Code: 01012011
Replacement red gasket for cod. 01012001-01/-02, 01012002-02
Code: 01012012
Replacement Co2 gauge Ø40-G1/8 0-6 BAR for cod.
01012001-01/-02, 01012002-01
Code: 01012016
Replacement Co2 gauge Ø50-Scale BAR and PSI-Full scale 250
BAR for cod. 01012002-02
Code: 01012017
Replacement Co2 gauge Ø50-Scale BAR and PSI-Full scale 10
BAR-Notch 7 BAR for cod. 01012002-02
16 July 2018 22/30
23. Code: 01012013
SR-Micro Co2 pressure reducer for disposable cylinder
Variants
Code Description
01012013-01 SR-Micro Co2 pressure reducer for disposable cylinder 11x1 disposable connection
The SR-Micro, thanks to a new system presetting "Adaptive comparison" you can forget the classical
gauge. Indeed, the pressure (controlled) is indicated with precision (2.5% KI) on the reducer. This has
enabled a compact reducer and incredible reliability, SR-Micro is all made of anodized aluminum alloy,
stainless steel and, on request, holes forwall bracket (M5).
Material: Aluminum HR
Input Pressure From 10 to 120 bar
Output Pressure: Adjustable (0 - 5,5bar)
Safety: Overpressure (Pop-Off)
Connection Cartr. M11x1 / DIN / ACME
Output: 1/8" F
Flow Rate: 12 L/min
Code: 01012014
SR-Micro Co2 pressure reducer ACME connection
Variants
Code Description
01012014-01 SR-Micro Co2 pressure reducer ACME connection
The SR-Micro, thanks to a new system presetting "Adaptive comparison" you can forget the classical
gauge. Indeed, the pressure (controlled) is indicated with precision (2.5% KI) on the reducer. This has
enabled a compact reducer and incredible reliability, SR-Micro is all made of anodized aluminum alloy,
stainless steel and, on request, holes forwall bracket (M5).
Material: Aluminum HR
Input Pressure From 10 to 120 bar
Output Pressure: Adjustable (0 - 5,5bar)
Safety: Overpressure (Pop-Off)
16 July 2018 23/30
24. Connection Cartr. M11x1 / DIN / ACME
Output: 1/8" F
Flow Rate: 12 L/min
Code: 01012015
Replacement white gasket for cod. 01012008, 01012014-01
Ball valves
Code: 01002001
Ball Angle Valve 90° ( P.V.C.) for tank 1/4''x1/4''~1/4''x3/8''
Variants
Code Description
01002001-01 Ball Angle Valve 90° ( P.V.C.) for tank 1/4" x 1/4"
01002001-02 Ball Angle Valve 90° ( P.V.C.) for tank 1/4" x 3/8"
Code: 01002002
Ball Valve with compression fitting 1/4"x1/4'' ~ 1/4''x3/8''
Variants
Code Description
01002002-01 Ball Valve with compression fitting Thread 1/4'' x quick fitting 1/4''
01002002-02 Ball Valve with compression fitting Thread 1/4'' x quick fitting 3/8''
16 July 2018 24/30
25. Code: 01002003
Ball Valve , Pipe 1/4" Tube 1/4" quick fitting
Code: 01002004
Mini Ball Valve M.F. Black handle 1/4" ~ 3/8 ~ 1/2'' (25)
Variants
Code Description
01002004-01 Mini Ball Valve M.F. Black handle 1/4" x 1/4" (25)
01002004-02 Mini Ball Valve M.F. Black handle 3/8" x 3/8" (25)
01002004-03 Mini Ball Valve M.F. Black handle 1/2" x 1/2" (18)
Code: 01002005
Ball Valve Mini F.F. Black handle 1/4" ~ 3/8 ~ 1/2'' (25)
Variants
Code Description
01002005-02 Ball Valve Mini F.F. Black handle 1/4" x 1/4" (25)
01002005-03 Ball Valve Mini F.F. Black handle 3/8" x 3/8" (25)
16 July 2018 25/30
26. Diverter valves
Code: 01005001
DV-14 Single diverter valve hose stem 1/4"
Check valves
Code: 01009001
Check valve OD Tube 1/4"
Water Block valves
Code: 01013002
Water Block valve with and w/o instant reset
Variants
Code Description
01013002-01 Water Block valve
01013002-02 Instant reset for water block
The valve Water Block is a Security instrument anti-flooding used to control the passage of a volume of
water between 5 and 50 liters.
16 July 2018 26/30
27. Its fuction is to measurement of the passage of the water and if this quantity is more than that fixed.
It stop immediatelly
Ideal for all machines that run with water. treatment systems. osmosis. dishwasher. washing machines.
He does not need energy from outside, because 'to operate using the stream that flows within it.
Resistant, environmental conditions limit.
Resistance to temperature changes.
Resistance to moisture.
Resistance to oxidation.
The device counts the quantity of water passed.
The average of the past for each notch of adjustment 4,5 - 5 liters.
Features:
* Number notches adjustment: 10
* Increase for each number: 4.5 - 5 liters
* Volume control max: 45 - 50 liters
* Temperature: The water inlet must not exceed 70 °C
* Flow rate: 2 to 30 l / min.
* Power Consumption: does not require electrical connections.
* Pressure: min. 0.2 - max. 10 bar.
* Connection to the pipes: the attacks are female threaded 3 / 4 "input side filter. Male-threaded 3 / 4"
output.
* Dimensions: 90mm x 5Ø
In case of block the valve can easily be and quickly reboot with the lever that is not essential for its
installation.
Code: 01013003
AS-413, AS-414 Water Leak Blocker with Auto Shut Off Valve
Variants
Code Description
01013003-01 AS-414 Water Leak Blocker IN/OUT 1/2" BSP male plastic solenoid valve
01013003-02 AS-413BR Water Leak Blocker IN-OUT 3/8" BSP M./F. brass solenoid valve
01013003-03 AS-414BR Water Leak Blocker IN-OUT 1/2" BSP M./F. brass solenoid valve
Features :
* Auto shut off water when water leak is detected
* 9V alkaline battery operated
* Auto shut off when low battery power
* Easy installation
* Protection for water filter, water softener
Specification :
* Operating voltage : 9V DC
* Supply current : typical 1.0 mA, maximum 15.0 mA.
16 July 2018 27/30
28. * Cable length : 1.5 M for solenoid valve cord
* Water leak detecting method : Control unit with detecting metal put on the floor near water filter
* Environment temperature : -20 ~ 80°C.
* AS-414 Maximum Pressure : 6 Bar
* AS-413BR, AS-414BR Maximum Pressure : 8 Bar
Operating instruction
Installation :
1-Install the proper fitting with the solenoid valve. The thread of solenoid valve is 3/8" or 1/2”. Then connect
the inlet tube of the water treatment system with the solenoid valve.
2-Reset to work
Keep pressing button for 4 seconds, the control unit activates solenoid valve to open the inlet tube of water
treatment system, and generates a long beep sound.
3-Auto shut off when water leak is detected
The control unit shuts activate solenoid valve to shut off the inlet tube of the water treatment system to
block water flow, and generates an acoustic signal, “beep-beep” , and blinks the blue light continuously to
notify the water leak is detected. After the leakage problem is solved, keep pressing button for 4 seconds,
the control unit activates solenoid valve to open the inlet tube of water treatment system again with a long
beep sound.
4-Low power shut off
When the battery power is low, the control unit shuts off the inlet tube of the water treatment system, blinks
red light and generates an acoustic signal “beep” to notify that the battery needs to be replaced to keep
water leak protection be functional.
Code: 01013004
Mechanical leaking sensor 1/4"
Variants
Code Description
01013004-01 Mechanical leaking sensor 1/4"
01013004-03 Mechanical leaking sensor 3/8"
01013004-02 Replacement instant wet towel-coin tissue for mechanical leaking sensor
Functioning: It is installed under the water purifier with 2 screws or double-sided tape present in the pack.
Base predisposed for 2 screws. When the towel-coin is wet, it expands and activates the water locking
mechanism.
16 July 2018 28/30