Nortonin automaalaukseen tarkoitetuilla hionta- ja kiillotustuotteilla saadaan aikaan nopeasti ja helposti pinta, joka luo pohjan täydelliselle lopputulokselle.

1. SANDING SOLUTION
Saint-Gobain Abrasives
European Headquarters
Rue de l’Ambassadeur - B.P.8
78 702 Conflans Cedex
France
Tel: +33 (0)1 34 90 40 00
Fax: +33 (0)1 39 19 89 56
www.nortonabrasives.com
1Paint stripping / removal
2Filler Preparation
3Primer Sanding finishing
4Fade Out Sanding
Stage Grit Tool Orbit/Pad
Sand to bare metal P80 / P120
Dynabrade 150mm
Random Orbital Sander
10mm/ Hard
Clean degrease repair
area (then apply filler)
- -
Stage Grit Tool Orbit/Pad
Apply defect guide coat - - -
Sand filler feather edges P120 + P150 / P180
Dynabrade 150mm
Random Orbital Sander
or
Multi-Air®
Hand
Sanding Block
5mm/
Medium
Finish filler enlarging area P220 / P240
Sand awkward areas with
BearTex®
Hand pads or
Rotolo Foam
BT Maroon - Rotolo
P240/P320
Clean degrease repair
area (then apply primer)
- - -
Stage Grit Tool Orbit/Pad
Apply defect guide coat - - -
Flat primer paint and
remove any defects
P320 / P400
Dynabrade 150mm
Random Orbital Sander
2.5mm/
Medium
Finish primer and enlarging
area
P400 / P600
Soft-Touch or with
a soft interface (*)
Sand awkward areas with
BearTex®
hand pads or
Rotolo Foam
BT Grey - Rotolo
P400/P800 (*)
- -
Stage Grit Tool Orbit/Pad
For blending panels
P800-P1000
Soft-Touch (*)
Dynabrade 150mm
Random Orbital Sander
2.5mm/ Soft
Blending awkward area with
Rotolo Foam
P1000 - -
Clean degrease repair
area (then apply paint)
- - -
(*) final grit size will depend on color of paint: solid, pearl or metallic
(*) final grit size will depend on color of paint: solid, pearl or metallic