1. 1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
DRG No.REV
1 / 1
SHEET
UPRIGHT CABINET ASSEMBLY 12' (3660)
SCALE
DRAWING BYMATERIAL
New
MODEL BY:
2013/07/22
2006/05/03
18 PROP STREET
SELBY
JOHANNESBURG
P.O BOX 569
GLENVISTA
2058
TEL: 011 493 8487
FAX: 011 493 4988
TOLERANCE TABLE TO BE USED FOR ALL DIMENSIONS UNLESS OTHER SPECIFIED
`0.8mm`0.5mm`0.3mm`0.2mm`0.1mm
315mm - 1000mm121mm - 315mm31mm - 120mm0mm - 6mm 6,1mm - 30mm
`2mm`1.8mm`1.6mm`1.3mm`1mm
3501mm - 4000mm3001mm - 3500mm2501mm - 3000mm2001mm - 2500mm1001mm - 2000mm
0mm ` 1°
0.0mm `0.5~
ANGLE TOL. IS
ALWAYS CRITICALDO NOT SCALE, IF IN DOUBT ASK
REV NO. DATE OF REVISIONREVISED BYREASON FOR REVISION
01
02
DATE
DATE
ANGULAR
TOLERANCE
DESCRIPTION
REF NUMBER
A2 Discharge Air Temperature = 0.9 Deg. C
B2 Top Shelf temperature : -0.7 Deg. C.
C2 Second Shelf Temperature 0.7 Deg. C
D2 Third Shelf
Temperature :1 Deg. C
F2 Fifth Shelf Temperature
0.2 Deg. C G2 Bottom Tray
Temperature = 1.6 Deg. C
H2 Return Air
Temperature 7.9 Deg. C
I1= Suction temperature at compressor = 4.8 Deg. C.
I2 = Discharge temperature at compressor = 38.5 Deg. C
I3 = Discharge temp before the condenser = 32.9 Deg. C
I4 = Liquid temp leaving the condenser = 30.2 Deg. C
Q4 = Suction Pressure = 3.6 Bar
R4 = Discharge Pressure = 15.8 Bar
J1-2 Water or Air temperature in and out
Energy Meter:
Power : 1.480 KW
Average power : 1.500KW
Active energy : 450 kWh
Hour Meter : 360.28
TEMPERATURE, PRESSURE, ENERGY
CONSUMTION FOR AN 8' UPRIGHT CABINET
ON THE 2/10/2013 at `15:00 Hours
Ambient Air around the cabinet M4= 27.9
Deg. C
Evaporator Temperature
K1 = Half way on coil = 1.3 Deg.
K2 = Discharge air = -5 Deg.
K4 = Expansion Bulb area = 2Deg. CC.