To prepare a clean, quality weld seam, it’s important to have a superior edge, and the correct preparation sequence prevents costly rework. The NorBevel-6 and NorBevel-12 range of machines and accessories are new additions to Norton’s metal fabrication solutions.
2. 02
NORTON BEVELSYSTEMS
New Norton NorBevel-6 and NorBevel-12 machines are a revolution
in bevelling and rounding metal!
Norton now offers two new machine ranges, compact and ergonomic,
electric and the pneumatic to make bevelling and rounding metal
easier, faster, more accurate and more cost effective. The NorBevel
concept has been designed for heavy-duty bevelling and radius work,
bevelling up to a depth of 12 mm.
BETTER WORKING CONDITIONS
Lightweight and almost vibration-free. The chips are large
enough to immediately drop to the ground. No hazardous
dust particles and/or combustion gases are released.
A MORE CONSISTENT AND ACCURATE ANGLE
NorBevel-6 and NorBevel-12 machines provide a more
consistent and accurate angle to the metal for a stronger
welded joint.
A MACHINE QUALITY FINISH WITHOUT CONTAMINATION
A better quality weld joint is created through reduced
encapsulation of impurities in the weld, as NorBevel does
not contaminate the metal.
SPEED AND FLEXIBILITY
Approximately 1.2m of bevelling can be done in one
minute. In a matter of seconds the machine can be
adjusted and the bevel heads replaced.
NO FINISHING AND NO DISCOLORATION
A perfect end result straight away, without finishing.
Discoloration is prevented through reduced-sparking that
adds hardly any heat to the material.
UNIFORM QUALITY
A larger bonding surface is created for paint and coatings
due to the uniform radius. Cable feed glands are no
longer required to prevent chafing when feeding through
cables, wiring and/or piping.
A QUALITY FINISH
Only with NorBevel you can quickly achieve high levels
of constant quality when rounding metal.
SPEED AND FLEXIBILITY
Rounding small openings from a diameter of 18 mm is
easy due to the compact and lightweight machine design.
Rounding metal now has an unprecedented degree
of flexibility.
FOR BEVELLING, NORBEVEL PROVIDES:
FOR ROUNDING, NORBEVEL PROVIDES:
3. 03
THE NORTON NORBEVEL-12 RANGE
The NorBevel 12 models have been designed for heavy duty bevelling and radius work,
bevelling up to a depth of 12 mm. Both the EBA-12 and ABA-12 models have powerful motors,
adjustable heads for adapting bevelling depth, and come in a convenient travel case with
adaptor. The electric version, EBA-12 has a variable speed switch for greater control.
NORBEVEL EBA-12 ELECTRIC
NORBEVEL-12 ELECTRIC (EBA-12)
Part no. 66261107700
Motor Electric
Max. bevel depth 12 mm
Bevel radius R2, R3, R4, R5, R6, R8
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure -
Air consumption -
Power 1.53kw
Voltage 230 V / 120 V
Speed 10.500 rpm
Weight 4,5 kg
Min. pipe/opening
diameter
41 mm
NORBEVEL ABA-12 PNEUMATIC
NORBEVEL-12 PNEUMATIC (ABA-12)
Part no. 66261107706
Motor Pneumatic
Max. bevel depth 12 mm
Bevel radius R2, R3, R4, R5, R6, R8
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure 6 bar
Air consumption 1100 ltr / min
Power 2 PK / 1,48kw
Voltage -
Speed 10.000 rpm
Weight 5,66 kg
Min. pipe/opening
diameter
41 mm
Bevel head with depth
adjustment
Variable speed setting Supplied in a
convenient case
Bevel head with depth
adjustment
Safety lever Supplied in a
convenient case
4. 04
Premium heads for Plasma / Laser-cut steel and Stainless steel
Part Number Radius Max depth Pk qty
66261136479 R2
8mm
1
66261136480 R3 1
66261146202 R4 1
66261152485* R5 1
66261152487* R6 1
66261152489* R8 1
Part Number Angle Max depth Pk qty
66261146203 15°
8mm
1
66261146204* 22,5° 1
66261146205 30° 1
66261146206* 37,5° 1
66261136503 45° 1
66261146207* 52,5° 1
66261146209* 60° 1
Part Number Angle Max depth Pk qty
66261146210 15°
12mm
1
66261146211* 22,5° 1
66261146212 30° 1
66261146215* 37,5° 1
66261146216 45° 1
66261146219* 52,5° 1
66261146220* 60° 1
Steel
Part Number Radius Max depth Pk qty
66261107707 R2
8mm
1
66261107799 R3 1
66261107801 R4 1
Part Number Angle Max depth Pk qty
66261107802 15°
8mm
1
66261107804* 22,5° 1
66261107805 30° 1
66261107806* 37,5° 1
66261107809 45° 1
66261146142* 52,5° 1
66261107811* 60° 1
Part Number Radius Max depth Pk qty
66261107812 15°
12mm
1
66261107840* 22,5° 1
66261107841 30° 1
66261107843* 37,5° 1
66261107844 45° 1
66261146144* 52,5° 1
66261107845* 60° 1
HEADS FOR NORBEVEL-12
(ELECTRIC AND PNEUMATIC)
* MTO item
* MTO item
Aluminium, plastic, brass and all soft metals
Part Number Radius Max depth Pk qty
66261113318 R2
8mm
1
66261113319 R3 1
66261113320 R4 1
66261152479 R5 1
66261152482 R6 1
66261152484 R8 1
Part Number Angle Max depth Pk qty
66261146151* 15°
8mm
1
66261146162* 22,5° 1
66261113321 30° 1
66261146164* 37,5° 1
66261113323 45° 1
66261146165* 52,5° 1
66261146166* 60° 1
Part Number Radius Max depth Pk qty
66261146167* 15°
12mm
1
66261146168* 22,5° 1
66261146169 30° 1
66261146170* 37,5° 1
66261146171 45° 1
66261146172* 52,5° 1
66261146173* 60° 1
* MTO item
Recommended maximum
cut depth is 4mm per pass.
Replace the cutting
head in seconds!
5. 05
THE NORTON NORBEVEL-6 RANGE
For lighter bevelling and rounding to a depth of 6 mm, the NorBevel-6 machines are compact,
maneuverable, and available in two super light weight models, with electric and pneumatic
motors. The Premium version can be used for more precise depth adjustment of 0.1 mm.
Spindle lock for a lighter and quicker change of NorBevel heads, only one allen key is
required.
NORBEVEL EBI-6 ELECTRIC PREMIUM
NORBEVEL-6 ELECTRIC (EBI-06) Premium
Part no. 66261126777
Motor Electric
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure -
Air consumption -
Power 500 W
Voltage 230 V / 120 V
Speed 11.000 rpm
Weight 2,0 kg
Min. pipe/opening
diameter
22 mm
NORBEVEL EBI-6 ELECTRIC
NORBEVEL-6 ELECTRIC (EBI-06)
Part no. 66261107846
Motor Electric
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure -
Air consumption -
Power 500 W
Voltage 230 V / 120 V
Speed 11.000 rpm
Weight 1,6 kg
Min. pipe/opening
diameter
22 mm
Variable speed
settings
Supplied in a
convenient case
Easy to adjust cutting
depth
Variable speed
settings
Supplied in a
convenient case
Easy to use
BEST
GOOD
6. 06
NORBEVEL ABIS-6 PNEUMATIC PREMIUM
NORBEVEL-6 PNEUMATIC (ABIS-06) Premium
Part no. 66261129888
Motor Pneumatic
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure 6 bar
Air consumption 310 ltr / min
Power 8 PK / 0.38 kw
Voltage -
Speed 25.000 rpm
Weight 1,1 kg
Min. pipe/opening
diameter
22 mm
NORBEVEL EBI-6 PNEUMATIC
NORBEVEL-6 PNEUMATIC (ABIS-06)
Part no. 66261107847
Motor Pneumatic
Max. bevel depth 6 mm
Bevel radius R2, R3, R4
Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60
Air pressure 6 bar
Air consumption 310 ltr / min
Power 8 PK / 0.38 kw
Voltage -
Speed 25.000 rpm
Weight 0.8 kg
Min. pipe/opening
diameter
22 mm
Safety lever Supplied in a
convenient case
Easy to adjust cutting
depth and replace
cutting head
Safety lever Supplied in a
convenient case
Easy to use
BEST
GOOD
7. 07
HEADS FOR NORBEVEL-6
Premium heads for Plasma / Laser-cut steel and Stainless steel
Part Number Radius Max depth Pk qty
66261136486 R2
6mm
1
66261136502 R3 1
66261146174 R4 1
Part Number Angle Max depth Pk qty
66261146175 15°
6mm
1
66261146178* 22,5° 1
66261146179 30° 1
66261146180* 37,5° 1
66261136504 45° 1
66261146181* 52,5° 1
66261146182* 60° 1
Steel
Part Number Radius Max depth Pk qty
66261107851 R2
6mm
1
66261107852 R3 1
66261107853 R4 1
Part Number Angle Max depth Pk qty
66261107854 15°
6mm
1
66261107855* 22,5° 1
66261107856 30° 1
66261107857* 37,5° 1
66261107858 45° 1
66261146141* 52,5° 1
66261107859* 60° 1
* MTO item * MTO item
Aluminium, plastic, brass and all soft metals
Part Number Radius Max depth Pk qty
66261113306 R2
6mm
1
66261113309 R3 1
66261113310 R4 1
Part Number Angle Max depth Pk qty
66261146145* 15°
6mm
1
66261146146* 22,5° 1
66261113311 30° 1
66261146147* 37,5° 1
66261113312 45° 1
66261146149* 52,5° 1
66261146150* 60° 1
* MTO item
Recommended maximum
cut depth is 4mm per pass.
Replace the cutting
head in seconds!
8. Norton is a registered trademark of Saint-Gobain Abrasives.
Form # 3208
Saint-Gobain Abrasifs
European Headquarters
Rue de l’Ambassadeur - B.P.8
78 702 Conflans Cedex
France
Tel: +33 (0)1 34 90 40 00
Fax: +33 (0)1 39 19 89 56
www.nortonabrasives.com