1. SNR9A00000000000000BAAT00
−
−
−
INTRODUCTION
How to Use This Manual
Safety Messages
Safety Labels
Safety Messages
Instructions
HONDA MOTOR CO., LTD.
Service Publication Office
As sections with * include SRS components;
special precautions are required when servicing.
This manual is divided into multiple sections. The first page of
each section is marked with a black tab that lines up with its
corresponding thumb index tab on this page and the back cover.
You can quickly find the first page of each section without
looking through a full table of contents. The symbols printed at
the top corner of each page can also be used as a quick
reference system.
Each section includes:
1. A table of contents, or an exploded view index showing:
• Parts disassembly sequence.
• Bolt torques and thread sizes.
• Page references to descriptions in text.
2. Disassembly/assembly procedures and tools.
3. Inspection.
4. Testing/troubleshooting.
5. Repair.
6. Adjustments.
Your safety, and the safety of others, is very important. To help
you make informed decisions, we have provided safety
messages, and other safety information throughout this manual.
Of course, it is not practical or possible to warn you about all the
hazards associated with servicing this vehicle. You must use
your own good judgment.
You will find important safety information in a variety of forms
including:
• on the vehicle.
• preceded by a safety alert symbol and
one of three signal words, DANGER, WARNING, or CAUTION.
These signal words mean:
You WILL be KILLED or SERIOUSLY HURT if
you don’t follow instructions.
You CAN be KILLED or SERIOUSLY HURT if
you don’t follow instructions.
You CAN be HURT if you don’t follow
instructions.
• how to service this vehicle correctly and safely.
All information contained in this manual is based on the latest
product information available at the time of printing. We reserve
the right to make changes at anytime without notice. No part of
this publication may be reproduced, or stored in a retrieval
system, or transmitted, in any form by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the
prior written permission of the publisher. This includes text,
figures, and tables.
As you read this manual, you will find information that is
preceded by a symbol. The purpose of this message is
to help prevent damage to your vehicle, other property, or the
environment.
First Edition 10/2008
All Rights Reserved
Specifications apply to Canada
Specifications
Maintenance
*Engine Electrical
Fuel and Emissions
*Transaxle
*Steering
*Body
*Body Electrical
*Restraints
*Audio, Navigation,
and Telematics
General Information
Engine Mechanical
Engine Cooling
Brakes
(Including VSA)
*Heating, Ventilation,
and Air Conditioning
Suspension
(Including TPMS)
08/08/21 14:05:21 61SNR030_000_0002
2006-2009 CSX - P/NO. 61SNR03
3. 01
01
03
04
02
SNR9A0A000000000000BAAT11
’06 Model
Vehicle Identification Number
Engine Number
Transmission Number
Paint Code
a. Manufacturer, Make and Type of Vehicle
b. Line, Body and Engine Type
c. Body Type and Transmission Type
d. Vehicle Grade (Series)
e. Check Digit
f. Model Year
g. Factory Code
h. Serial Number
a. Engine Type
b. Serial Number
a. Transmission Type
b. Serial Number
1-2
General Information
Chassis and Paint Codes
2HH 6 200001
FD5 5 * 6 H
K20Z2 1300001
-
RPD6 1000001
-
a b c d e f g h
a b
a b
Vehicle Identification Number and
Canadian Motor Vehicle Safety
Standard Certification Label.
COLOR LABEL
2HH: Honda of Canada Mfg.,
Honda Canada Inc.
Acura passenger vehicle
FD5: Acura CSX/K20Z2
5: 4-door Sedan/5-speed Manual
6: 4-door Sedan/5-speed Automatic
5: TOURING
7: PREMIUM
6: ’06
H: Alliston, Ontario Factory in Canada
K20Z2: 2.0 L DOHC i-VTEC Sequential Multiport
Fuel-injected engine
RPD6: 5-speed Manual
MPMA: 5-speed Automatic
Code Color
NH-578 Taffeta White
NH-700M Alabaster Silver Metallic
NH-701M Galaxy Gray Metallic
B-92P Nighthawk Black Pearl
B-536P Royal Blue Pearl
B-537M Neutron Blue Metallic
YR-557P Habanero Red Pearl
08/08/21 14:05:56 61SNR030_010_0002
4. −
−
−
−
−
−
−
01
01
02
03
02
SNR9A0B000000000000BAAT11
’07 Model
Vehicle Identification Number
Engine Number
Transmission Number
Paint Code
a. Manufacturer, Make and Type of Vehicle
b. Line, Body and Engine Type
c. Body Type and Transmission Type
d. Vehicle Grade (Series)
e. Check Digit
f. Model Year
g. Factory Code
h. Serial Number
a. Engine Type
b. Serial Number
a. Transmission Type
b. Serial Number
1-3
2HH 6 200001
FD5 5 * 7 H
a b c d e f g h
Vehicle Identification Number and
Canadian Motor Vehicle Safety
Standard Certification Label.
K20Z2 2300001
-
RPD5 1500001
-
a b
a b
COLOR LABEL
2HH: Honda of Canada Mfg.,
Honda Canada Inc.
Acura passenger vehicle
FD5: Acura CSX/K20Z2, K20Z3
5: 4-door Sedan/5-speed Manual, 6-speed Manual
6: 4-door Sedan/5-speed Automatic
5: TOURING
7: PREMIUM
9: TYPE S
7: ’07
H: Alliston, Ontario Factory in Canada
200001 : K20Z2 engine model
250001 : K20Z3 engine model
K20Z2: 2.0 L DOHC i-VTEC Sequential Multiport
Fuel-injected engine
K20Z3: 2.0 L DOHC i-VTEC Sequential Multiport
Fuel-injected engine
2300001 : K20Z2
2000001 : K20Z3
RPD5: 5-speed Manual
PNN3: 6-speed Manual
MPMA: 5-speed Automatic
1000001 : PNN3
1500001 : RPD5
2000001 : MPMA
Code Color
NH-578 Taffeta White
NH-700M Alabaster Silver Metallic
NH-701M Galaxy Gray Metallic
B-92P Nighthawk Black Pearl
B-529P Fiji Blue Pearl
B-536P Royal Blue Pearl
B-537M Neutron Blue Metallic
YR-557P Habanero Red Pearl
08/08/21 14:05:57 61SNR030_010_0003
5. −
−
−
−
−
−
−
01
02
03
04
05
SNR9A0C000000000000BAAT12
’08 Model
Vehicle Identification Number
Engine Number
Transmission Number
Paint Code
a. Manufacturer, Make and Type of Vehicle
b. Line, Body and Engine Type
c. Body Type and Transmission Type
d. Vehicle Grade (Series)
e. Check Digit
f. Model Year
g. Factory Code
h. Serial Number
a. Engine Type
b. Serial Number
a. Transmission Type
b. Serial Number
1-4
General Information
Chassis and Paint Codes (cont’d)
2HH 6 200001
FD5 5 * 8 H
a b c d e f g h
Vehicle Identification Number and
Canadian Motor Vehicle Safety
Standard Certification Label.
K20Z2 3300001
-
RPD5 2500001
-
a b
a b
COLOR LABEL
2HH: Honda of Canada Mfg.,
Honda Canada Inc.
Acura passenger vehicle
FD5: Acura CSX/K20Z2, K20Z3
5: 4-door Sedan/5-speed Manual, 6-speed Manual
6: 4-door Sedan/5-speed Automatic
5: CSX
7: PREMIUM
9: TYPE S
8: ’08
H: Alliston, Ontario Factory in Canada
200001 : K20Z2 engine model
250001 : K20Z3 engine model
K20Z2: 2.0 L DOHC i-VTEC Sequential Multiport
Fuel-injected engine
K20Z3: 2.0 L DOHC i-VTEC Sequential Multiport
Fuel-injected engine
3300001 : K20Z2
3000001 : K20Z3
RPD5: 5-speed Manual
PNN3: 6-speed Manual
MPMA: 5-speed Automatic
2000001 : PNN3
2500001 : RPD5
3000001 : MPMA
Code Color
NH-578 Taffeta White
NH-700M Alabaster Silver Metallic
NH-701M Galaxy Gray Metallic
B-92P Nighthawk Black Pearl
B-529P Fiji Blue Pearl
B-536P Royal Blue Pearl
R-525P New Red Pearl
08/08/21 14:05:58 61SNR030_010_0004
6. −
−
−
−
−
−
−
*01
*02
*03
*04
*05
SNR9A0D000000000000BAAT13
’09 Model
Vehicle Identification Number
Engine Number
Transmission Number
Paint Code
a. Manufacturer, Make and Type of Vehicle
b. Line, Body and Engine Type
c. Body Type and Transmission Type
d. Vehicle Grade (Series)
e. Check Digit
f. Model Year
g. Factory Code
h. Serial Number
a. Engine Type
b. Serial Number
a. Transmission Type
b. Serial Number
1-5
2HH 6 200001
FD5 5 * 9 H
a b c d e f g h
Vehicle Identification Number and
Canadian Motor Vehicle Safety
Standard Certification Label.
K20Z2 5300001
-
SPTM 4000001
-
a b
a b
COLOR LABEL
2HH: Honda of Canada Mfg.,
Honda Canada Inc.
Acura passenger vehicle
FD5: Acura CSX/K20Z2, K20Z3
5: 4-door Sedan/5-speed Manual, 6-speed Manual
6: 4-door Sedan/5-speed Automatic
5: CSX
7: TECH PKG
9: TYPE S
9: ’09
H: Alliston, Ontario Factory in Canada
200001 : K20Z2 engine model
250001 : K20Z3 engine model
K20Z2: 2.0 L DOHC i-VTEC Sequential Multiport
Fuel-injected engine
K20Z3: 2.0 L DOHC i-VTEC Sequential Multiport
Fuel-injected engine
5300001 : K20Z2
4000001 : K20Z3
SPTM: 5-speed Manual
SPNM: 6-speed Manual
MPMA: 5-speed Automatic
4000001 : SPTM
4000001 : SPNM
4000001 : MPMA
Code Color
NH-578 Taffeta White
NH-700M Alabaster Silver Metallic
NH-731P Crystal Black Pearl
NH-737M Polished Metal Metallic
B-561P Dyno Blue Pearl
YR-578M Urban Titanium Metallic
B-536P Royal Blue Pearl
R-525P New Red Pearl
08/08/21 14:05:59 61SNR030_010_0005
7. 06
*01
*02
SNR9A00000000000000BAAT30
K20Z2 engine Model:
K20Z3 engine Model:
1-6
General Information
Identification Number Locations
Vehicle Identification
Number (VIN)
Vehicle Identification
Number (VIN)
Engine
Number
Transmission
Number
(Manual)
Transmission
Number
(Automatic)
Engine
Number
Engine Number Transmission Number
(Manual)
08/08/21 14:06:00 61SNR030_010_0006
8. *03
02
SNR9A00000000000000BAAT40
1-7
Danger/Warning/Caution Label Locations
FRONT PASSENGER
AIRBAG MODULE
DANGER
FRONT SEAT BELT
TENSIONER CAUTION
SRS WARNING
INFORMATION
MONITOR NOTICE
STEERING COLUMN
NOTICE
SIDE AIRBAG CAUTION
SIDE AIRBAG
MODULE DANGER
FRONT SEAT BELT
BUCKLE TENSIONER
CAUTION
Front Passenger’s Compartment:
Steering Wheel:
CABLE REEL CAUTION
DRIVER AIRBAG
MODULE DANGER
DRIVER AIRBAG
MODULE DANGER
Rear Passenger’s Compartment:
ROOF-SIDE AIRBAG
MODULE DANGER
(cont’d)
Located on driver’s and
passenger’s doorjamb
08/08/21 14:06:00 61SNR030_010_0007
9. *04
*05
Doorjamb Area
1-8
General Information
Danger/Warning/Caution Label Locations (cont’d)
RADIATOR CAP
DANGER
BATTERY
DANGER
SRS WARNING
AIR CONDITIONING
INFORMATION
SERVICE INFORMATION
and ENGINE COOLANT
INFORMATION
RADIATOR CAP
DANGER
BATTERY
DANGER
SRS WARNING
AIR CONDITIONING
INFORMATION
SERVICE INFORMATION
and ENGINE COOLANT
INFORMATION
TIRE INFORMATION
Located on driver’s doorjamb
08/08/21 14:06:01 61SNR030_010_0008
10. 04
*01
*02
*03
SNR9AEA000000000000BAAT50
−
− −
−
−
±
±
±
±
Emission Group Identification Test Group and Evaporative Family
K20Z2 engine Model:
Example:
’06 Model
’07 Model
’08 Model
’09 Model
Test Group:
a. Model Year
b. Manufacturer Subcode
c. Family Type
d. Displacement Group
e. Sequence Characters
Evaporative Family:
a. Model Year
b. Manufacturer Subcode
c. Family Type
d. Canister Working Capacity Group
e. Sequence Characters
1-9
Under-hood Emission Control Label
TO EVAP
CANISTER
EVAP CANISTER
PURGE VALVE
VERS
RESERVOIR
EVAP
VALVE DE PURGE
DU PRESERVOIR EVAP
PCV VALVE
SOUPAPE RGC
FRONT
AV ANT
T H I S V E H I C L E C O N F O R M S T O U . S . E P A T I E R 2 B I N 5
R E G U L A T I O N S A P P L I C A B L E T O 2 0 0 6 M O D E L Y E A R
N E W P A S S E N G E R C A R S A N D C A L I F O R N I A A P P L I C A B L E
T O 2 0 0 6 M O D E L Y E A R N E W L E V I I L E V P A S S E N G E R C A R S .
T W C , A / F S E N S O R , H O 2 S , E G R , S F I
CE VEH ICU LE EST CONFORME A UX LOIS EPA TIER 2 DES ETA TS-UNIS
APPLICA BLES POUR LES VEHICULES DE BIN 5 POUR LES NOUV ELLES VEHICULES
VO ITURES D E TOURISME D’ A NNEE MO DELE 2006 ET A UX LOIS DE LA CA LIFORNIE
APPLICA BLES POUR LES NOUV EA UX VEHICU LES LEVII LEV VOITURES DE TOURISME
D’ ANN EE MOD ELE 2006.
T W C , A / F S E N S O R , H O 2 S , E G R , S F I
VALVE LASH
(COLD)
NO OTHER ADJUSTMENTS NEEDED.
IN
EX
: 0.23 0.02 mm
: 0.30 0.02 mm
JEUDESSOUPAPES
(MOUTEURFROID)
AUCUN AUTRE REGLACE NECESSAIRE.
ADM
ECM
: 0.23 0.02 mm
: 0.30 0.02 mm
VEHICLE EMISSION CONTROL INFORMATION
INFORMATIONS-DISPOSITIFS ANTI-POLLUTION
I N F O RM A T I O N
HONDA MOTOR CO. , LTD.
HONDA MOTOR CO. , LTD.
R R A - C 0 0
MORMESSURLESEMISSIONSD’ECHAPPEMENT
: LEVII, LEV (ACCREDITATION ET EN SERVICE)
: TIER 2-BIN 5 (ACCREDITATION ET EN SERVICE)
EPA
ARB
Z N
6• 6
•
THE FACTORY INSTALLED LONG LIFE COOLANT MUST BE REPLACED ACCORDING TO
MAINTENANCE MINDER SUB CODE 5, OR AT 10 YEARS WHICHEVER COMES FIEST.
THEREAFTER EVERY 5 YEARS.
WHEN ADDING OR REPLACING THE COOLANT, ALWAYS USE ACURA RECOMMENDED
GENUINE LONG-LIFE ANTI FREEZE / COOLANT TYPE 2. THIS COOLANT IS PRE MIXED WITH
50% DISTILLED WATER. IT DOES NOT REQUIRE ANY ADDITIONAL MIXING.
NEVER DILUTE THE COOLANT, OR THE LIFE OF THE ENGINE MAY BE SERIOUSLY SHORTENED.
CHECK OR ADD THE COOLANT AT THE RESERVE TANK, NOT THE RADIATOR.
FOR FURTHER INFORMATION ON THE COOLING SYSTEM, READ THE OWNER’S MANUAL OR
CHECK WITH YOUR ACURA DEALER.
LORS DE L’APPOINT OU DE REMPLACEMENT DU LIQUIDE DE REFROIDISSEMENT.
TOUJOURS UTILISER L’ANTIGEL /LIQUIDE DE REFROIDISSEMENT TYPE 2 LONGUE DUREE
ACURA D’ORIGINE RECOMMENDE CE LIQUIDE DE REFROIDISSEMENT EST MELANGE AU
PREALABLE AVEC 50 % D’EAU DISTILLEE. IL N’EXIGE AUCUN MELANGE ADDITIONNEL.
NE JAMAIS DILUER LE LIQUIDE DE REFROIDISSEMENT, LA DUREE DE VIE DU MOTEUR
POURRAIT EN ETRE AFFECTEE.
LE LIQUIDE DE REFROIDISSEMENT LONGUE DUREE INSTALLE A L’USINE DOIT ETRE
RENLACE CONFORMEMENT AU CODE SECONDAIRE 5 DE L’AIDE-MEMOIRE D’ENTRETIEN
OU APRES 10 ANS, SELON LA PREMIERE EVENTUALITE.PUIS TOUS LES 5 ANS.
CONTROLER LES NIVEAUX ET FAIRE L’APPOINT AU VASE D’EXPANSION. JAMAIS AU RADIATEUR.
POUR TOUTE INFORMATION COMPLEMENTAIRESURLE CIRCUITDE REFROIDISSEMENT,SE
REFERERAU MANUEL D’UTILISATEUR OU PRENDRE CONTACT AVECUN CONCESSIONNAIRE ACURA.
6HNXV02. 4FKC
6HNXR0106BBA
2.0L
6HNXV02. 4FA6
6HNXR0106BBA
ACCREDITATION OBD II
2.0L
OBD II CERTIFIED
EXHAUST EMISSIONS STANDARDS
: LEVII, LEV (CERTIFICATION AND IN-USE)
: TIER 2-BIN 5 (CERTIFICATION AND IN-USE)
EPA
ARB
T H I S S P A R K I G N I T I O N S Y S T E M
C O M P L I E S W I T H C A N A D I A N I C E S 0 0 2 .
C E S Y S T E M E D ’ A L L U M A G E P A R
A L A N O R M E N M B 0 0 2 D U C A N A D A .
E T I N C E L L E D E V E H I C U L E E S T C O N F O R M E
RE N SE I G N E M E N T S
1 08
’06-07 Models
’08-09 Models
THE FACTORY INSTALLED LONG-LIFE COOLANT MUST BE REPLACED ACCORDING TO
MAINTENANCE MINDER SUB CODE 5, OR AT 10 YEARS WHICHEVER COMES FIEST.
THEREAFTER EVERY 5 YEARS.
WHEN ADDING OR REPLACING THE COOLANT, ALWAYS USE Honda RECOMMENDED
GENUINE LONG-LIFE ANTI-FREEZE / COOLANT TYPE 2. THIS COOLANT IS PRE-MIXED WITH
50% DISTILLED WATER. IT DOES NOT REQUIRE ANY ADDITIONAL MIXING.
NEVER DILUTE THE COOLANT, OR THE LIFE OF THE ENGINE MAY BE SERIOUSLY SHORTENED.
CHECK OR ADD THE COOLANT AT THE RESERVE TANK, NOT THE RADIATOR.
FOR FURTHER INFORMATION ON THE COOLING SYSTEM, READ THE OWNER’S MANUAL OR
CHECK WITH YOUR Honda DEALER.
LORS DE L’APPOINT OU DU REMPLACEMENT DU LIQUIDE DE REFROIDISSEMENT.
TOUJOURS UTILISER L’ANTIGEL /LIQUIDE DE REFROIDISSEMENT TYPE 2 LONGUE DUREE
Honda D’ORIGINE RECOMMANDE CE LIQUIDE DE REFROIDISSEMENT EST MELANGE AU
PREALABLE AVEC 50 % D’EAU DISTILLEE. IL N’EXIGE AUCUN MELANGE ADDITIONNEL.
NE JAMAIS DILUER LE LIQUIDE DE REFROIDISSEMENT, LA DUREE DE VIE DU MOTEUR
POURRAIT EN ETRE AFFECTEE.
LE LIQUIDE DE REFROIDISSEMENT LONGUE DUREE INSTALLE A L’USINE DOIT ETRE
RENLACE CONFORMEMENT AU CODE SECONDAIRE 5 DE L’AIDE-MEMOIRE D’ENTRETIEN
OU APRES 10 ANS, SELON LA PREMIERE EVENTUALITE.PUIS TOUS LES 5 ANS.
CONTROLER LES NIVEAUX ET FAIRE L’APPOINT AU VASE D’EXPANSION. JAMAIS AU RADIATEUR.
POUR TOUTE INFORMATION COMPLEMENTAIRE SUR LE CIRCUIT DE REFROIDISSEMENT, SE
REFERER AU MANUEL D’UTILISATEUR OU PRENDRE CONTACT AVEC UN CONCESSIONNAIRE Honda.
I N F O R M A T I O N
R E N S E I G N E M E N T S
VEHICLE EMISSION CONTROL INFORMATION
INFORMATIONS-DISPOSITIFS ANTI-POLLUTION
R R A - C 0 2
U. S. EPA : T2B5 LDV OBD : CA OBD I I
OBD : CA OBD I I
FUEL : GASOLINE
ARB : LEV I I LEV PC FUEL : GASOLINE
T W C , A / F S E N S O R , H O 2 S , E G R , S F I
8HNXV02. 4FKC 8HNXR0106BBY 2. 0L
CONFORMS TO REGULATIONS : 2008MY
LOIS EPA : T2B5 LDV OBD : CA OBD I I
OBD : CA OBD I I
CARBURANT : ESSENCE
ARB : LEV I I LEV PC CARBURANT : ESSENCE
T W C , A / F S E N S O R , H O 2 S , E G R , S F I
8HNXV02. 4FKC 8HNXR0106BBY 2. 0L
CONFORME AUX NORMES : D’ ANNEE MODELE 2008
T H IS SPA RK IG N ITI O N SY ST EM CO MP LIES W ITH CA N A D IA N ICE S-00 2.
CE SY STE ME D ’ A LL U MA G E PA R ET IN CEL LE D E V EH ICU L E E ST CO N F O RME A LA N O RM E N M B-00 2 D U C A N A D A .
HNX
9 02.0
V VA9
HNX
9 0106
R VEA
a b c d e
a b c d e
THIS VEHICLE CONFORMS TO U.S. EPA TIER 2 BIN 5
REGULATIONS APPLICABLE TO 2006 MODEL YEAR
NEW PASSENGER CARS AND CALIFORNIA
REGULATIONS APPLICABLE TO 2006 MODEL YEAR
NEW LEV II LEV PASSENGER CARS.
THIS VEHICLE CONFORMS TO U.S. EPA TIER 2 BIN 5
REGULATIONS APPLICABLE TO 2007 MODEL YEAR
NEW PASSENGER CARS AND CALIFORNIA
REGULATIONS APPLICABLE TO 2007 MODEL YEAR
NEW LEV II LEV PASSENGER CARS.
CONFORMS TO REGULATIONS: 2008 MY
CONFORMS TO REGULATIONS: 2009 MY
6: ’06
7: ’07
8: ’08
9: ’09
HNX: HONDA
V: LDV
FKC: ’06 model, ’08 model
HKC: ’07 model
VA9: ’09 model
6: ’06
7: ’07
8: ’08
9: ’09
HNX: HONDA
R: EVAP/ORVR
BBA: ’06 model
BBY: ’07 model, ’08 model
VEA: ’09 model
08/08/21 14:06:02 61SNR030_010_0009
11. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
12. 08
*01
*02
*03
SNR9AEB000000000000BAAT50
±
±
±
±
Emission Group Identification Test Group and Evaporative Family
K20Z3 engine Model:
Example:
’07 Model
’08 Model
’09 Model
Test Group:
a. Model Year
b. Manufacturer Subcode
c. Family Type
d. Displacement Group
e. Sequence Characters
Evaporative Family:
a. Model Year
b. Manufacturer Subcode
c. Family Type
d. Canister Working Capacity Group
e. Sequence Characters
1-10
General Information
Under-hood Emission Control Label (cont’d)
EVAPCANISTER
PURGE VALVE
TO EVAP
CANISTER
PCVVALVE FRONT
SOUPAPERGC AVANT
VERS
RESERVOIR
EVAP
VALVE DEPURGE
DU RESERVOIR EVAP
VEHICLE EMISSION CONTROL INFORMATION
HONDA MOTOR CO. , LTD.
R R B - C 1 0
3 •2
6• 5
T H I S V E H I C L E CO N F O R MS T O U . S. E PA TI E R 2 B I N 5
R EG U L A TI O N S A P PL I C A B L E TO 2 0 0 7 MO D E L YE A R
N EW P A SS EN G ER C A R S A N D C A L I F O R N I A RE G U L A T I O N S A PPL I CA B L E
T O 2 0 0 7 MO D E L Y EA R N EW L E V I I L EV P A SS EN G ER C A R S.
CE VEHICULE EST CONFORME AUX LOIS EPA TIER 2 DES ETATS-UNIS
APPLICABLES POUR LES VEHICULES DE BIN 5 POUR LES NOUVEAUX VEHICULES
VOITURES DE TOURISME D’ ANNEE MODELE 2007 ET AUX LOIS DE LA CALIFORNIE
APPLICABLES POUR LES NOUVEAUX VEHICULES LEVII LEV VOITURES DE TOURISME
D’ ANNEE MODELE 2007.
THE FACTORY INSTALLED LONG-LIFE COOLANT MUST BE REPLACED ACCORDING TO
MAINTENANCE MINDER SUB CODE 5, OR AT 10 YEARS WHICHEVER COMES FIEST.
THEREAFTER EVERY 5 YEARS.
WHEN ADDING OR REPLACING THE COOLANT, ALWAYS USE ACURA RECOMMENDED
GENUINE LONG-LIFE ANTI-FREEZE / COOLANT TYPE 2. THIS COOLANT IS PRE-MIXED WITH
50% DISTILLED WATER. IT DOES NOT REQUIRE ANY ADDITIONAL MIXING.
NEVER DILUTE THE COOLANT, OR THE LIFE OF THE ENGINE MAY BE SERIOUSLY SHORTENED.
CHECK OR ADD THE COOLANT AT THE RESERVE TANK, NOT THE RADIATOR.
FOR FURTHER INFORMATION ON THE COOLING SYSTEM, READ THE OWNER’S MANUAL OR
CHECK WITH YOUR ACURA DEALER.
LORS DE L’APPOINT OU DU REMPLACEMENT DU LIQUIDE DE REFROIDISSEMENT.
TOUJOURS UTILISER L’ANTIGEL /LIQUIDE DE REFROIDISSEMENT TYPE 2 LONGUE DUREE
ACURA D’ORIGINE RECOMMANDE CE LIQUIDE DE REFROIDISSEMENT EST MELANGE AU
PREALABLE AVEC 50 % D’EAU DISTILLEE. IL N’EXIGE AUCUN MELANGE ADDITIONNEL.
NE JAMAIS DILUER LE LIQUIDE DE REFROIDISSEMENT, LA DUREE DE VIE DU MOTEUR
POURRAIT EN ETRE AFFECTEE.
LE LIQUIDE DE REFROIDISSEMENT LONGUE DUREE INSTALLE A L’USINE DOIT ETRE
RENLACE CONFORMEMENT AU CODE SECONDAIRE 5 DE L’AIDE-MEMOIRE D’ENTRETIEN
OU APRES 10 ANS, SELON LA PREMIERE EVENTUALITE.PUIS TOUS LES 5 ANS.
CONTROLER LES NIVEAUX ET FAIREL’APPOINT AU VASED’EXPANSION. JAMAIS AU RADIATEUR.
POUR TOUTE INFORMATION COMPLEMENTAIRESUR LECIRCUIT DE REFROIDISSEMENT, SE
REFERER AU MANUEL D’UTILISATEUR OU PRENDRE CONTACTAVEC UN CONCESSIONNAIRE ACURA.
INFORMATIONS-DISPOSITIFS ANTI-POLLUTION
T W C , A / F S E N S O R , H O 2 S , S F I
7HNX V02. 4HKC
7HNX R0106BBY
O BD II CERTIFIED
2.0L
7HNX V02. 4HKC
7HNX R0106BBY
ACCREDITATIONOBDII
2.0L
T W C , A / F S E N S O R , H O 2 S , S F I
T H I S S P A R K I G N I T I O N S Y S T E M
C O M P L I E S W I T H C A N A D I A N I C E S - 0 0 2 .
C E S Y S T E M E D ’ A L L U M A G E P A R
E T I N C E L L E D E V E H I C U L E E S T C O N F O R M E
A L A N O R M E N M B - 0 0 2 D U C A N A D A .
VALVE LASH
(COLD)
NO OTHERADJUSTMENTS NEEDED.
IN
EX
: 0.23 0.02 mm
: 0.27 0.02 mm
JEU DES SOUPAPES
(MOTEUR FROID)
AUCUN AUTRE REGLACE NECESSAIRE.
ADM
ECH
: 0.23 0.02mm
: 0.27 0.02mm
NORMESSURLESEMISSIONSD’ECHAPPEMENT
: LEVII, LEV (ACCREDITATION ET EN SERVICE)
: TIER2 BIN 5 (ACCREDITATION ETEN SERVICE)
EPA
ARB
E X H A U S T E M I S S I O N S S T A N D A R D S
: L E V I I , L E V ( C E R T I F I C A T I O N A N D I N - U S E )
: T I E R 2 B I N 5 ( C E R T I F I C A T I O N A N D I N - U S E )
E P A
A R B
I N F O R M A T I O N
R E N S E I G N E M E N T S
1 08
’07 Model
’08-09 Models
THE FACTORY INSTALLED LONG-LIFE COOLANT MUST BE REPLACED ACCORDING TO
MAINTENANCE MINDER SUB CODE 5, OR AT 10 YEARS WHICHEVER COMES FIEST.
THEREAFTER EVERY 5 YEARS.
WHEN ADDING OR REPLACING THE COOLANT, ALWAYS USE ACURA RECOMMENDED
GENUINE LONG-LIFE ANTI-FREEZE / COOLANT TYPE 2. THIS COOLANT IS PRE-MIXED WITH
50% DISTILLED WATER. IT DOES NOT REQUIRE ANY ADDITIONAL MIXING.
NEVER DILUTE THE COOLANT, OR THE LIFE OF THE ENGINE MAY BE SERIOUSLY SHORTENED.
CHECK OR ADD THE COOLANT AT THE RESERVE TANK, NOT THE RADIATOR.
FOR FURTHER INFORMATION ON THE COOLING SYSTEM, READ THE OWNER’S MANUAL OR
CHECK WITH YOUR ACURA DEALER.
LORS DE L’APPOINT OU DU REMPLACEMENT DU LIQUIDE DE REFROIDISSEMENT.
TOUJOURS UTILISER L’ANTIGEL /LIQUIDE DE REFROIDISSEMENT TYPE 2 LONGUE DUREE
ACURA D’ORIGINE RECOMMANDE CE LIQUIDE DE REFROIDISSEMENT EST MELANGE AU
PREALABLE AVEC 50 % D’EAU DISTILLEE. IL N’EXIGE AUCUN MELANGE ADDITIONNEL.
NE JAMAIS DILUER LE LIQUIDE DE REFROIDISSEMENT, LA DUREE DE VIE DU MOTEUR
POURRAIT EN ETRE AFFECTEE.
LE LIQUIDE DE REFROIDISSEMENT LONGUE DUREE INSTALLE A L’USINE DOIT ETRE
RENLACE CONFORMEMENT AU CODE SECONDAIRE 5 DE L’AIDE-MEMOIRE D’ENTRETIEN
OU APRES 10 ANS, SELON LA PREMIERE EVENTUALITE.PUIS TOUS LES 5 ANS.
CONTROLER LES NIVEAUX ET FAIREL’APPOINTAU VASE D’EXPANSION.JAMAIS AU RADIATEUR.
POUR TOUTEINFORMATION COMPLEMENTAIRESUR LECIRCUITDEREFROIDISSEMENT, SE
REFERER AU MANUEL D’UTILISATEUR OU PRENDRE CONTACT AVEC UN CONCESSIONNAIREACURA.
I N F O R M A T I O N
R E N S E I G N E M E N T S
VEHICLE EMISSION CONTROL INFORMATION
INFORMATIONS-DISPOSITIFS ANTI-POLLUTION
HONDA MOTOR CO. , LTD. R R B - C 1 1 1 0 8
U. S. EPA : T2B5 LDV OBD : CA OBD I I
OBD : CA OBD I I
FUEL : GASOLINE
ARB : LEV I I LEV PC FUEL : GASOLINE
T W C , A / F S E N S O R , H O 2 S , S F I
8HNXV02. 4FKC 8HNXR0106BBY 2. 0L
CONFORMS TO REGULATIONS : 2008MY
LOIS EPA : T2B5 LDV OBD : CA OBD I I
OBD : CA OBD I I
CARBURANT : ESSENCE
ARB : LEV I I LEV PC CARBURANT : ESSENCE
T W C , A / F S E N S O R , H O 2 S , S F I
8HNXV02. 4FKC 8HNXR0106BBY 2. 0L
CONFORME AUX NORMES : D’ ANNEE MODELE 2008
TH IS S PA R K IG N I TIO N S YS TEM CO M PLIE S W ITH CA N A D IA N ICES -00 2.
CE SY STE ME D ’ A LL U MA G E PA R ETI N CEL LE D E V EH IC U LE EST C O NF O RM E A LA N O RM E N M B- 0 02 D U C A N A D A .
HNX
9 02.0
V VA9
HNX
9 0106
R VEA
a b c d e
a b c d e
THIS VEHICLE CONFORMS TO U.S. EPA TIER 2 BIN 5
REGULATIONS APPLICABLE TO 2007 MODEL YEAR
NEW PASSENGER CARS AND CALIFORNIA
REGULATIONS APPLICABLE TO 2007 MODEL YEAR
NEW LEV II LEV PASSENGER CARS.
CONFORMS TO REGULATIONS: 2008 MY
CONFORMS TO REGULATIONS: 2009 MY
7: ’07
8: ’08
9: ’09
HNX: HONDA
V: LDV
HKC: ’07 model
FKC: ’08 model
VA9: ’09 model
7: ’07
8: ’08
9: ’09
HNX: HONDA
R: EVAP/ORVR
BBY: ’07 model, ’08 model
VEA: ’09 model
08/08/21 14:06:04 61SNR030_010_0010
13. 16
17
SNR9A00000000000000BAAT60
Vehicle Lift
Safety Stands
Floor Jack
1-11
Lift and Support Points
A
B C
C
C
B
A
NOTE: If you are going to remove heavy components
such as suspension or the fuel tank from the rear of the
vehicle, first support the front of the vehicle with tall
safety stands. When substantial weight is removed
from the rear of the vehicle, the center of gravity can
change, causing the vehicle to tip forward on the lift.
1. Position the lift blocks (A) under the vehicle’s front
support points (B) and rear support points (C).
2. Raise the lift a few inches, and rock the vehicle
gently to be sure it is firmly supported.
3. Raise the lift to its full height, and inspect the
vehicle support points for solid contact with the lift
blocks.
To support the vehicle on safety stands, use the same
support points as for a vehicle lift. Always use safety
stands when working on or under any vehicle that is
supported only by a jack.
1. When lifting the front of the vehicle, set the parking
brake. When lifting the rear of the vehicle, put the
shift lever in reverse for manual transmission, or in
P for automatic transmission.
2. Block the wheels that are not being lifted.
3. Position the floor jack under the front jacking
bracket (A) or the rear jacking bracket (B). Center
the jacking bracket on the jack lift platform (C), and
jack up the vehicle high enough to fit the safety
stands under it.
4. Position the safety stands under the support points,
and adjust them so the vehicle is level.
5. Lower the vehicle onto the stands.
08/08/21 14:06:05 61SNR030_010_0011
14. 18
19
SNR9A00000000000000BAAT70
−
Emergency Towing
Flat-bed Equipment
This is the best way of
transporting the vehicle.
Front:
Rear:
1-12
General Information
Towing
A
B
D
C
If the vehicle needs to be towed, call a professional
towing service. Never tow the vehicle behind another
vehicle with a rope or chain. It is very dangerous.
There are three popular methods of towing a vehicle.
The operator loads the vehicle
on the back of a truck.
To accommodate flat-bed equipment, the vehicle is
equipped with front towing hooks (A), front tie down
hook slots (B), rear towing hook (C), and rear tie down
hook slots (D).
The rear towing hook can be used with a winch to pull
the vehicle onto the truck, and the tie down hook slots
can be used to secure the vehicle to the truck.
08/08/21 14:06:05 61SNR030_010_0012
15. −
−
Wheel Lift Equipment
This is an acceptable way of towing the
vehicle.
Sling-type Equipment
This method of towing
the vehicle is unacceptable.
Manual Transmission
Automatic Transmission
1-13
The tow truck uses two
pivoting arms that go under the tires (front or rear) and
lift them off the ground. The other two wheels remain
on the ground.
The tow truck uses metal
cables with hooks on the ends. These hooks go around
parts of the frame or the suspension, and the cables lift
that end of the vehicle off the ground. The vehicle’s
suspension and body can be seriously damaged if this
method of towing is attempted.
If the vehicle cannot be transported by a flat-bed, it
should be towed with the front wheels off the ground. If
the vehicle is damaged, and must be towed with the
front wheels on the ground, or with all four wheels on
the ground, do this:
• Release the parking brake.
• Shift the transmission to neutral.
• Leave the ignition switch in ACCESSORY (I) so the
steering wheel does not lock.
• Make sure all accessories are turned off to minimize
current battery draw.
• Release the parking brake.
• Start the engine.
• Shift to D, then to N.
• Turn off the engine.
• Leave the ignition switch in ACCESSORY (I) so the
steering wheel does not lock.
• Make sure all accessories are turned off to minimize
current battery draw.
It is best to tow the vehicle no farther than 80 km
(50 miles), and keep the speed below 55 km/h (35 mph).
• Improper towing preparation will damage the
transmission. Follow the above procedure exactly. If
you cannot shift the transmission or start the engine
(automatic transmission), the vehicle must be
transported on a flat-bed.
• Trying to lift or tow the vehicle by the bumpers will
cause serious damage. The bumpers are not
designed to support the vehicle’s weight.
08/08/21 14:06:05 61SNR030_010_0013