321 r application in steel mills

224 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
224
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

321 r application in steel mills

  1. 1. MOLYKOTE 321R AIR DRYING ANTI-FRICTION COATING SPRAY VIZAG STEEL CATALOG NO. 2790600110718 Advantages of Anti-Friction Coatings Molykote Anti-Friction Coatings are bonded, dry-film lubricants that provide superior lubrication in harsh operating conditions and environmental extremes. They are economical to apply, long lasting and valued in uses where other lubricants fail. Compared to typical lubricating pastes and greases, Molykote Anti-Friction Coatings have a number of advantages. They provide:       Dry, clean lubrication unaffected by dust, dirt and moisture; Lifetime lubrication without aging, evaporation or oxidation; Rust prevention without surface treatments like galvanizing; Non-flammable, non-staining protection on metals and plastics; Controlled film thickness for exact load-bearing capabilities, and Fully effective lubrication even after prolonged shutdown. How Anti-Friction Coatings Work Molykote Anti-Friction Coatings have solid lubricant particles dispersed in carefully selected blends of resin and solvents. The volume concentration of lubricants and choice of raw materials are important for the lubricating and corrosion-protection properties. Once applied to a metal or plastic, these paint-like solutions bond to the coated surface and provide a slippery lubricating film that is dry and clean. The film covers all surface roughness and optimizes metal-to-metal, metal-to-plastic or plastic-to-plastic friction even under extreme loads and working conditions. Steel Mill Application Areas: Solid lubricants in a binder system adhere strongly to a substrate, forming a thin, slippery film of lubricating particles providing longterm lubrication to components ! 1. Nuts and Bolts in all flange and structural assemblies prior to assembly to achieve uniform torque tension, prevent seizure. 2. Valve stems for easy twisting of valves – no contamination 3. Lathe Machine Beds and Lead Screws in Area Repair Workshops 4. Gears and other close fitting components after machining to avoid running-in wear 5. Wire ropes and chains in dusty environments where grease or oil lubrication can attract contaminants 6. Wear plates and liners in rolling mills to prevent premature wear 7. Cutting tools like broaches, reamers, drills and gear cutters, etc 8. Dry lubrication of all sliding surfaces, oscillating surfaces or areas inaccessible for lubrication 9. Lubrication of circuit breaker components Marketed in this region by Project Sales Corp, Authorised Distributors for Dow Corning India P Limited Call Anil +91-9866-46-7276; Office +91-891-2564393 sales@projectsalescorp.com

×