2. High plus and minus lenses
Super-Lenti Glass
Super-Lenti HD
Recre
Bonding glass
Double sided working Bi concave
– Sphere and Cylinder
– SV
– Bifocals
3. Compensated powers
On wraps the powers will change due to
– Wrap angle
– Wearing distance
– Power
4. Nortor HD SV in a 8 Base
Full Rx required plus:-
– Optical Centres and heights
– Wrap Angle
– Tilt angle
– BVD trial and actual
– Pupil Diameter
– Lens Curve
5. Sportor optic design but with
reduced edge blend
Reduces both plus and
minus
Peripheral edge blend
45/50mm clear zone
Applied to all lens designs
6. Segment on the rear
surface
Blended to make it
invisible
All Materials
Adds to +4.00D
7. Nortor and Ultor XXL free
form
Effectively produces Up
to a 100mm uncut lens
8. High Prisms and Prism Control
PUCK
Slab off Traditional FT28
Slab of HD PPL
FT35
Franklin Split
Presto
9. PUCK
1.67 Moulding
20mm thick
65mm diameter
Up to 20D of prism
Any curve combination
10. Slab Off /On
Removes unwanted differential vertical prism
Minimum slab off 2D
– Less on freeform
Maximum 10D dependent on blank
substance
SV BIF PAL
11. Anisometropic Corrections
Base up prism incorporated to relieve
anisometropic Rx’s
One lens or split between the two
13. Iseikonic Lenses
Magnification derived from substance and
curves
Both Rx and Plano
14. Over Decentred D seg
12mm inwards
decentration
Amount of Prism
dependent on add
15. Franklin Split
Produced from two lenses
Similar appearance to the E line bifocal
Fully customisable for Prisms and Centres
Available in all indexes
Trifocal also available
17. Prism Control Bifocals
Glass Round segs
Glass D Segs
– Zeiss Centre Prism Segment
Franklin Split
Presto
Odd Segment sizes
Over Decentred D seg
Slab Off / On
18. Odd Size Segments
Dependent on Add
– d1-d2= 2c(F1-F2)/A
– Larger segment induced more base down prism
Cost effective
1.5 index only Glass /Plastic