The document contains design drawings and specifications for signage at the Jumeirah Messilah Beach Hotel project in Qatar, including details for wall-mounted and freestanding signs identifying areas of the hotel and providing directions. The drawings provide dimensions, materials, mounting methods, and color specifications for over a dozen different sign types. Notes indicate the designer's intent and responsibilities of the fabricator in developing construction documents and verifying site conditions.
6. Project Code Drawing title Scale Project no. Date Page
JUMEIRAH MESSILAH BEACH HOTEL S03 Layout 1 Secondary Site Identification As Noted 205174 2009.05.18 G2.8
Issue for Tender on Monument Wall
Notes: Design Drawings and specifications convey the design intent of the work.
These documents should be used as the basis of construction documents to be
developed by others. Fabricator is responsible for field verifying all existing field
conditions prior to sign fabrication.
65mm deep fabricated 65 5mm gap
letterforms. Paint face and GENERAL NOTES:
all returns Color C3,
medium bronze. SIGN TYPE S03 - Layout 1
2300
Existing masonry wall
Refer to Speci cations for quality of products, methods of assembly and
3 nishes to be used.
-
Verify all existing site conditions, including landscaping and sign wall
184
Fabricated aluminum protection, prior to fabrication.
310
letterforms and logo
137
with painted nish. Fabricator responsible for technical design of sign,
including its interface with other construction and trades.
Stainless steel pin mounts;
align horizontally & vertically
590
Fabricator to provide samples as indicated on drawings.
318
Fabricator to provide fullsize paper plot of sign. Plot to be located on building
1195
for review by owner / architect for nal approval prior to fabrication.
198
Provide full size samples Align
of areas shown. Note Coordinate illumination of sign. Design of lighting by lighting consultant.
approved samples may be
133 92 133
incorporated into work. 65mm deep fabricated dimensional letters and logo forms. Paint face and
Align all returns Color C3, medium bronze to match sample provided by designer.
Fabricator to enclose back of letterforms and logo to prevent nests or habitat
for insects.
Blend all edges between
face and returns. Visible
Pin mount letterforms 5mm from face of sign background with st. stl. pin
joints are not permitted.
mounts. Paint pin mounts to match color of wall. Align pins horizontally and
vertically.
Flood lighting type to be
determined by lighting or Coordinate illumination of sign. Design of lighting and speci cations by
landscape consultant others to be submitted for nal approval prior to installation. (Externally
4
illuminated - see landscape lighting plan - ld.500)
S03 Layout 1 - Hotel Identi cation at Monument Wall
1:20
1
Sign Type S01
G2.4
3 S03 Layout 1 - Section
1:20
400 2300
4
-
400
2
- Sign Type S03 -
Layout 1
2 S03 Layout 1 - Hotel Identi cation at Monument Wall
1:100 1 S03 Layout 1 - West Elevation Site View
1:500
7. Project Code Drawing title Scale Project no. Date Page
JUMEIRAH MESSILAH BEACH HOTEL S04 Freestanding Directional Vehicular As Noted 205174 2009.05.18 G2.11
Issue for Tender Sign
Notes: Design Drawings and specifications convey the design intent of the work.
These documents should be used as the basis of construction documents to be
developed by others. Fabricator is responsible for field verifying all existing field
conditions prior to sign fabrication.
GENERAL NOTES
SIGN TYPE S04
Refer to Speci cations for quality of products, methods of assembly
and nishes to be used.
Verify all existing site conditions prior to fabrication.
Fabricator to provide as built enlarged detailed plans and
photographs indicating paving conditions at sign locations.
Fabricator responsible for technical design of sign,
including its interface with other construction and trades.
Fabricator to provide samples as indicated on drawings. Final
locations to be veri ed in eld by owner/architect prior to
installation.
Fabricator to provide fullsize paper plot of sign. Plot to be located
on building for review by owner / architect for nal approval prior
to fabrication.
Freestanding fabricated sign structure clad with 18mm thick
honed jerusalem stone to match architectural material. Stone
3 S04 - Detail of Stone Cladding/Mitre Joints
Full Size
attachment to sign structure to be determined by fabricator.
Joints to be miter nished.
13mm thick waterjet-cut bronze text, logo & arrows to be stud
mounted ush to sign face. Face and all returns on text, logo and
arrows to match M1 medium oxidized nish. Grain direction on
type and symbols to be horizontal.
200 850 Coordinate illumination of sign. Design of lighting by others.
C
L
EQ EQ
Freestanding fabricated sign
structure clad with 18mm thick
honed jerusalem stone to match
architectural material. Stone
attachment to sign structure
to be determined by fabricator. Provide full size samples
Joints to be miter nished. of area shown.
13mm thick waterjet-cut bronze text,
logo & arrows to be stud mounted
ush to sign face. Face and all returns HOTEL
on text, logo and arrows to match
ENTR ANCE
1450
M1 Medium Oxidized Finish.
50mm x 50mm welded (or as
required) metal frame to be
engineered by others.
All footings engineered by others.
2 S04 - Section
1:20 1 S04 - Typical Elevation
1:20
8. 0.8
12 3
2402 $3513
Electronics to be
determined by others
Painted aluminum
L-shaped bracket
Threaded studs -
coordinate location
and quantity of
threaded studs with
equipment provided.
3 A08 - Location View
1:2 2 A08 - Section
1:2
9. Project Code Drawing title Scale Project no. Date Page
JUMEIRAH MESSILAH BEACH HOTEL P07 Parking Elevator Bank & Lobby As Noted 205174 2009.05.18 G2.55
Issue for Tender Identification
Notes: Design Drawings and specifications convey the design intent of the work.
These documents should be used as the basis of construction documents to be
developed by others. Fabricator is responsible for field verifying all existing field
conditions prior to sign fabrication.
GENERAL NOTES
Align copy SIGN TYPE P07
Refer to Speci cations for quality of products, methods of assembly and nishes to
be used.
105 88 105 180 140 85 140
Paint copy: Color C1, Verify all existing site conditions prior to fabrication.
White
Fabricator responsible for technical design of sign, including its interface with other
Paint walls Color C3, construction and trades.
Medium Bronze
SOUTH CONFERENCE Paint graphic Color C4,
Fabricator to provide samples as indicated on drawings.
Fabricator to provide fullsize paper plot to be located on site and reviewed by owner /
CENTER ELEVATORS Satin Gold
(x)
architect for nal approval prior to fabrication.
See - Sheet MBH-G01.01A and MBH-G01.02B for extent of painted walls at parking
areas.
4 P-P07.01 Detail 1. Paint walls Color C3, Medium Bronze.
2. Background graphics to be sprayed Color C4, Satin Gold onto face of wall using
1:25 computer cut stencils to mask background.
3
- 3. Copy to be painted Color C1, White.
250
250 SU IT E S
L527 - L547
Align copy Paint entry
door wall
similar color
(x)
150 150 105 122 140
Paint copy: Color C1,
White
SUITES
L527 - L547 Paint walls Color C3,
2 B-P07.01 Elevation
1:50
Paint entry doors
Color C4, Satin Gold
Medium Bronze
250
(x - align with top of door)
Paint graphic Color C4,
Satin Gold
N O RT H WI N G E L E VATO R
L527 - L547
(x)
Entry Door
3 B-P07.01 Elevation
1:25 1 B-P07.02 Elevation
1:50
10. SIGN TYPE QTY FLOOR SIGN MESSAGE COLOR SPECIFICATION
B1.1 1 L OFF-WHITE METALLIC MP 04856
EVENT SPACES
WC
Design/ 123 Mercer Ave. Hartsdale NY 10530
914/ 948.1828 www.ribbitinc.com
JG STEAKHOUSE Build
Scope Interior Signage
BLISS
B1.2 1 LL OFF-WHITE METALLIC MP 04856
GREAT ROOM
BLISS
SWEAT
B1.3 1 R OFF-WHITE METALLIC MP 04856
ALTITUDE
LOUNGE
HOTEL WASHINGTON
Floor Directional Type Location
515 15th Street N.W.
Project: Washington, DC 20004
16”
1-1/4"
copy/arrow in dark
charcoal grey tactile
cutout overlay and
register to background
1-1/4"
Drawing
Number
B1-1
1/4” alum. sign panel
10"
laser cut to shape with Drawing
INTERIOR
Name
graphic motif painted Main Floor Directional
o -white metallic MP 04856
1-1/4"
mount with studs/silicone
1-1/4"
wall color TBD P.O.Box 17777
Dubai / United Arab Emirates
Owner: Tel: +971 4 390 3333
Date
22 November 2008
14 January 2009
Sign Type B1 - Floor Main Directional ID - Lobby Level End View 20 February 2009
1 25 March 2009
(3) required in total
30 March 2009
19
11. FRONT OF CAB
123 Mercer Ave. Hartsdale NY 10530
D3 Design/
914/ 948.1828 www.ribbitinc.com
Build
CALL Scope Interior Signage
PANEL
8”
DOOR
Elevator #2 Plan View
etched graphic
no ll
HOTEL WASHINGTON
515 15th Street N.W.
Project: Washington, DC 20004
Floor Directory in Elevator #2 Interior
etched copy ll in
white paint
FRONT OF CAB
5/8"
1/8” alum. sign panel
paint met. dark charcoal
mounted with DS tape Drawing
13”
D3 location TBD Number
C2-1
CALL
PANEL
Drawing
Name
INTERIOR
DOOR Elevator Cab Directory
Elevator #1 & #3 Plan View
60” to center of sign
P.O.Box 17777
Dubai / United Arab Emirates
Owner: Tel: +971 4 390 3333
Date
22 November 2008
Floor Directory in Elevator #1 & #3 Interior End View Sign Type C2 - Floor Directory ID at Elevator - Elevation 14 January 2009
1 20 February 2009
(3) required 25 March 2009
30 March 2009
22
12. Design/ 123 Mercer Ave. Hartsdale NY 10530
Build 914/ 948.1828 www.ribbitinc.com
Scope Interior Signage
60”
HOTEL WASHINGTON
6” 515 15th Street N.W.
Project: Washington, DC 20004
typical corridor
wallcovering
Typical Guest Room Entry - Sign Location
white ADA tactile raised
2"
numbers overlay to align
with alum. cutout
background
5/8"
6-1/8"
Drawing
1/4” alum. sign panel Number
laser cut to shape with E2-1
graphic motif painted
dark charcoal metallic
Drawing
Name
INTERIOR
MP 18207 mount with Guest Room Identification
3-1/2"
studs/silicone
P.O.Box 17777
Dubai / United Arab Emirates
Owner: Tel: +971 4 390 3333
Typical 4 Digit Layout - Elevation End View Typical Sign Type E2 - Guest Room ID - Front Elevation
2 1 Date
22 November 2008
(317) required 14 January 2009
20 February 2009
25 March 2009
30 March 2009
30