Hyfit deals in Superb Quality Flareless Bite Type Fittings. Call us to place an order for Flareless Bite Type Fittings.

1. Design & Specification Of Hyfit
Working Principle:
A body with conical seat, a nut & a ferrule when assembled on a tube
forms a joint. On progressively tightening the nut on the body, the
ferrule bites into the outer surface of the tube, thereby ensuring
leak-proof joint at high operating pressures.
Classifications:
HF Flareless Bite Type Fitting are available from 6mm OD of tube to
42mm OD of tube in low pressure series i.e. ‘L’ and 6mm OD to tube
to 38mm OD of tube in high pressure series i.e. ‘S’. These are also
available for use with Nominal Bore of tube from 1/8″ to 1-1/2″ and
OD of tube from 3/16″ to 2″.
Design and Construction:
HF Flareless Bite Type Fittings consist of three components which
are manufactured to produce a strong and leak-proof joint on
proper assembly. The three components are as follows:
1. Body: HF fitting bodies are available in many configurations. The
straight products are made from cold drawn bars. The shaped
products such as Tees, Elbows etc. are mostly hot forged. They are
further machined to size as per specifications.

2. 2. Ferrule: HF fittings are precision machined & heat treated to
ensure proper biting and vibration dampening in the assembly.
3. Nut: HF nuts are either cold formed, hot formed or machined to
size from cold drawn material.
Specifications:
HF fittings confirm to IS:8805-1978
Material:
Body & Nut: Carbon Steel
Ferrule: Heat treated Carbon Steel
Surface Protection: Blackened/Zinc Plated
Working Pressure: Refer Individual Table
Working temp. range: -10 °C to + 120 °C
Test Procedure: As per IS 10103 (P-II):1982
Intended for tubes: Confirming to DIN 2391/C or equivalent
For more details, Please visit our website@http://www.hyfit.com/